Texas Instruments

TLV2322ID - Dual 8V 85kHz CMOS Op Amp | Texas Instruments

N.º de pieza: TLV2322ID ✓ Activo
2 V to 8 V Vdss 8-pin SOIC (D) Package
MOQ: 1 |

TLV2322ID Descripción general

The Texas Instruments TLV2322ID is a dual, low-voltage, low-power CMOS operational amplifier with a 2 V to 8 V supply range, 85 kHz gain-bandwidth product, and 8-pin SOIC package. Each channel is designed for low-voltage signal conditioning where compactness, rail-to-rail input behavior, and low operating current are important. The TLV2322ID also supports 3 V and 5 V single-supply operation.

An operational amplifier is an analog integrated circuit that uses high-gain feedback to amplify the difference between two input voltages. The TLV2322 belongs to the CMOS operational-amplifier family within the broader amplifier IC and signal-processing hierarchy. Two amplifiers in one package reduce board area when a design needs two related signal paths, such as sensing and filtering or filtering and driving.

Key characteristics include an 8 V maximum supply, 85 kHz gain-bandwidth product, and 0.02 V/us slew rate. According to the Texas Instruments TLV2322 product information, the common-mode input range extends below the negative rail and up to the positive supply, while the output range includes negative voltages. These features make the device useful for battery-powered instrumentation, low-voltage sensor interfaces, and general-purpose analog signal conditioning.

The TLV2322ID uses complementary CMOS input and output stages to support low-voltage operation while controlling power consumption. At 85 kHz gain-bandwidth product, the amplifier is intended for moderate-bandwidth tasks rather than high-speed video or precision instrumentation. Its dual-channel configuration also allows each amplifier to be configured independently for noninverting, inverting, filtering, buffering, or comparator-style open-loop use where appropriate.

Typical uses include low-voltage sensor conditioning, portable measurement systems, analog filters, audio and communication interface circuits, and 3 V or 5 V embedded systems. Because the common-mode input range extends beyond the negative rail, the device can process signals approaching ground with a single positive supply, reducing the need for negative rails in many sensor systems.

PCB design should keep input and feedback connections short, place decoupling capacitors close to the supply pins, and maintain adequate copper around the SOIC footprint. Bias currents, output loading, source impedance, and the selected feedback network determine practical accuracy and stability more than nominal bandwidth alone.

This page combines the manufacturer product specifications with application engineering, pinout guidance, comparison criteria, and practical design notes. It is intended to help engineers evaluate the TLV2322ID quickly while preserving the distinctions between bandwidth, slew rate, common-mode range, supply voltage, and pin compatibility.

Alternativas directas para TLV2322ID — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

TLV2316IDR

✅ Sustitución directa
📦 8-pin SOIC (D)
Related TI single-supply amplifier family; channel count and detailed electrical limits require confirmation against the TLV2316 datasheet, while the TLV2322ID provides two amplifiers and an 85 kHz gain-bandwidth product

📋 Alternativa de referencia (no en el catálogo)

TLV2322ID Valores máximos y características eléctricas

Amplifier Type Dual general-purpose operational amplifier
Number of Channels 2 channels
Supply Voltage Range 2 V to 8 V
Maximum Supply Voltage 8 V
Gain-Bandwidth Product 85 kHz
Slew Rate 0.02 V/us
3 V Single-Supply Operation Supported
5 V Single-Supply Operation Supported
Common-Mode Input Range Extends below the negative rail and up to VDD
Rango de tensión de salida Includes negative voltages
Process Technology CMOS
Encapsulado 8-pin SOIC (D)
Tipo de montaje Surface mount

Configuración de pines de TLV2322ID

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
Pin 1 OUTA — Amplifier A output
Pin 2 IN A- — Amplifier A inverting input
Pin 3 IN A+ — Amplifier A noninverting input
Pin 4 V- — Negative supply connection
Pin 5 IN B+ — Amplifier B noninverting input
Pin 6 IN B- — Amplifier B inverting input
Pin 7 OUTB — Amplifier B output
Pin 8 V+ — Positive supply connection

Aplicaciones típicas

TLV2322ID es adecuado para 6 aplicacións: Battery-Powered Sensor Conditioning, Low-Voltage Analog Filtering, Portable Measurement Systems, Single-Supply Audio Interface, Industrial Control Signal Interface, Communication Interface Buffering.

🧩

Battery-Powered Sensor Conditioning

The TLV2322ID fits battery-powered sensor interfaces because its 2 V to 8 V supply range covers both 3 V and 5 V systems. The common-mode input range extends below the negative rail and up to VDD, allowing signals near ground to be amplified without adding a negative supply in many designs. Two channels can condition one sensor signal or process complementary outputs. With an 85 kHz gain-bandwidth product and 0.02 V/us slew rate, it is most appropriate for slow sensor signals and low-frequency filters rather than wideband waveform capture.

🔧

Low-Voltage Analog Filtering

The TLV2322ID can implement active filters, integrators, and signal-shaping stages in 3 V or 5 V analog systems. Its 85 kHz gain-bandwidth product supports moderate-frequency closed-loop gains, while the dual configuration supports cascaded filter stages without requiring two packages. The common-mode input range extending below the negative rail simplifies filters centered on small sensor signals. Designers should still account for the 0.02 V/us slew rate, output swing, source impedance, and the frequency-dependent noise gain when setting component values.

📱

Portable Measurement Systems

Portable measurement systems benefit from the TLV2322ID because it combines two amplifiers with operation from 2 V to 8 V. One channel may buffer a sensor while the second provides gain or active filtering, reducing board area in compact instruments. The low-voltage CMOS design is suited to battery-powered products operating from 3 V or 5 V rails. Because the 85 kHz gain-bandwidth product is modest, the device is best used for slowly changing measurements where offset, bias current, and output settling are more important than high-speed conversion accuracy.

🎧

Single-Supply Audio Interface

The TLV2322ID can support low-level audio and communication interfaces built around a single positive supply. Its common-mode range below the negative rail permits processing ground-centered signals, and the output range includes negative voltages. Two channels can handle left and right paths or a filter and driver stage. The 85 kHz gain-bandwidth product and 0.02 V/us slew rate are suitable for modest audio-band conditioning, while designers should verify output swing into the intended load and avoid using this amplifier as a high-power output-stage driver.

🏭

Industrial Control Signal Interface

The TLV2322ID is suitable for low-level industrial control signals that require conditioning within a compact 8-pin SOIC footprint. Its 2 V to 8 V supply capability supports multiple embedded rails, and the common-mode range approaching VDD can simplify conditioning of controller-level signals. The dual amplifier arrangement can process a command and a feedback signal independently. For factory equipment, verify the qualified temperature range, transient tolerance, noise performance, and system-level isolation requirements before approving the device for production.

🌐

Communication Interface Buffering

The TLV2322ID can buffer or condition slow communication and logic-interface signals in equipment operating from 3 V or 5 V. Its extended common-mode input range is useful when logic levels sit near the lower supply rail, and the dual channels can support complementary signals or separate transmit and receive conditioning paths. The 85 kHz gain-bandwidth product is adequate for many low-rate control interfaces but not for high-speed differential links. Confirm the source impedance, capacitive loading, settling requirements, and logic thresholds before selecting the amplifier.

What is the Texas Instruments TLV2322ID?
The TLV2322ID is a dual, low-voltage CMOS operational amplifier for signal-conditioning applications using supplies from 2 V to 8 V. According to the Texas Instruments TLV2322 product page, it provides an 85 kHz gain-bandwidth product and is offered in an 8-pin SOIC package. The two independent amplifiers can perform noninverting, inverting, filtering, buffering, or other analog conditioning functions.
What are the key specifications of TLV2322ID that engineers should know?
The TLV2322ID combines two CMOS operational-amplifier channels, a 2 V to 8 V supply range, an 85 kHz gain-bandwidth product, and a 0.02 V/us slew rate. According to Texas Instruments product information, its common-mode input range extends below the negative rail and up to VDD, and its output range includes negative voltages. These are the primary parameters to evaluate for low-voltage sensor conditioning.
Can the TLV2322ID operate from a 3 V supply?
Yes, the TLV2322ID supports 3 V single-supply operation. According to the Texas Instruments TLV2322 documentation, operation is characterized across 3 V and 5 V supply conditions, while the overall device supply range extends from 2 V to 8 V. This makes it suitable for battery-powered and embedded systems that cannot provide a higher rail voltage.
Can the TLV2322ID operate from a 5 V supply?
Yes, the TLV2322ID supports 5 V single-supply operation. Texas Instruments identifies 5 V as a characterized single-supply condition, while the stated operating supply range is 2 V to 8 V. At 5 V, the common-mode input range extending below the negative rail and toward the positive rail helps simplify signal conditioning for sensors whose outputs operate close to ground.
Where can I download the TLV2322ID datasheet PDF?
Download the TLV2322ID documentation from the official Texas Instruments TLV2322 product page at https://www.ti.com/product/TLV2322. The product page provides manufacturer datasheets and ordering information. The TLV2322ID is the 8-pin SOIC orderable variant, so confirm that the selected ordering table entry corresponds to the SOIC (D) package before using its pinout.
Where can I find the TLV2322ID pinout?
The TLV2322ID pinout is found in the manufacturer datasheet and on the Texas Instruments TLV2322 product page. The device uses an 8-pin SOIC package: pins 1 through 3 form amplifier A, pins 4 through 8 contain the supply and amplifier B connections, and the exact descriptions are listed in the pinout section of this page. Use the pin-description table when assigning PCB tracks.
Is TLV2322ID suitable for low-voltage sensor conditioning?
Yes, the TLV2322ID is suitable for many low-voltage sensor-conditioning circuits. Its 2 V to 8 V supply range supports 3 V and 5 V systems, while the common-mode input range extends below the negative rail and up to VDD. According to Texas Instruments product information, this input behavior reduces the need for a negative supply when sensor signals lie close to ground.
What can replace the TLV2322ID?
A valid replacement must use the same 8-pin SOIC footprint, preserve the two-amplifier pin arrangement, and remain close to the TLV2322ID in supply voltage, bandwidth, slew rate, input range, and output capability. The TLV2316IDR appears in a direct comparison listing, but its channel count and electrical limits must be confirmed before treating it as a drop-in replacement. Use the manufacturer cross-reference search and verify every pin function.
Is the TLV2316IDR the same as the TLV2322ID?
No, the TLV2316IDR and TLV2322ID should not be assumed to be interchangeable. The TLV2316IDR appears in a component comparison listing, but the TLV2322ID is a dual amplifier while the TLV2316 family may provide a different channel configuration. Confirm amplifier count, pin functions, supply range, common-mode range, output swing, bandwidth, and stability against the manufacturer datasheets before making a replacement.
What is the best Texas Instruments equivalent for TLV2322ID?
The closest Texas Instruments equivalent must be selected from the TLV2322 family and verified for the same SOIC (D) pinout and electrical limits. The TLV2316IDR is the only directly related alternative shown by the comparison research, but it may differ in channel count. Use Texas Instruments’ cross-reference search to identify an exact same-package option, then compare its input range, output swing, slew rate, and supply current.
When should I choose TLV2322ID instead of another dual op amp?
Choose the TLV2322ID when a design needs two low-voltage CMOS amplifiers operating from 2 V to 8 V and can work within an 85 kHz gain-bandwidth product and 0.02 V/us slew rate. Its common-mode range extending below the negative rail is valuable for ground-referenced sensor signals. Select another amplifier when the circuit requires faster settling, lower offset, lower noise, wider bandwidth, or a different package.
TLV2322ID versus TLV2316IDR: which is better for a dual op-amp circuit?
The TLV2322ID is the better match for a circuit requiring two amplifiers in one 8-pin SOIC package, subject to final pinout verification. The TLV2316IDR is associated with a different TI family, so channel count and electrical characteristics must be checked rather than inferred from the shared package family. Confirm that the replacement provides two independent amplifiers, the same supply pins, and compatible output and input connections.
How much bandwidth does the TLV2322ID provide for filtering?
The TLV2322ID provides an 85 kHz gain-bandwidth product according to the Texas Instruments product page. Practical closed-loop bandwidth depends on the selected feedback topology and noise-gain curve; it is not automatically 85 kHz for every gain setting. The 0.02 V/us slew rate also limits large-signal response, so use the device for moderate-bandwidth filtering rather than high-speed waveform processing.
Does the TLV2322ID support input signals near ground?
Yes, the TLV2322ID can accept input voltages near ground because its common-mode input range extends below the negative rail. According to Texas Instruments product information, the range continues up to VDD. This is especially useful in single-supply sensor circuits, although the actual usable range still depends on output loading, gain, frequency, and the amplifier’s output swing.
Where to buy TLV2322ID online?
Use the Request a Quote form on this page to request TLV2322ID availability, current lead time, and order handling. The TLV2322ID is an 8-pin SOIC orderable variant of the Texas Instruments TLV2322 family. Before requesting a quote, confirm the exact TLV2322ID suffix and any required quantity, reel orientation, or shipment split.
What is the price of TLV2322ID?
Use the Request a Quote form on this page for the current TLV2322ID price, quantity breaks, and availability. Pricing can change with volume, packaging, market conditions, and component supply. Submit the required quantity and purchase order details so the returned quotation reflects the exact 8-pin SOIC orderable part rather than a related family member.
What is the lead time for TLV2322ID?
Request the current TLV2322ID lead time through the Request a Quote form on this page. The quotation process can account for requested quantity, date, and shipment requirements. For production planning, also include the required delivery date and any acceptable partial-shipment terms rather than relying on a generic stock estimate.

Datos de referencia de ingeniería para TLV2322ID — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose the TLV2322ID for dual-channel, low-voltage analog signal conditioning when the circuit operates from 2 V to 8 V and needs moderate rather than high bandwidth. It is particularly attractive for 3 V and 5 V sensor interfaces because the common-mode input range extends below the negative rail and toward the positive rail. The 85 kHz gain-bandwidth product and 0.02 V/us slew rate are suitable for slow sensors, buffering, and modest active filters, but not for high-speed signal chains. Consider the TLV2316IDR only after verifying its channel count and complete pinout against the TLV2322ID. Choose a different operational amplifier when the design requires lower offset, lower noise, faster settling, wider bandwidth, greater output swing, or a different package. For any alternative, check supply current, output loading, input bias current, stability with the intended load, and the complete ordering suffix before approving a drop-in change.

Comparación con alternativas

Parámetro Este producto TLV2316IDR
Package 8-pin SOIC (D) 8-pin SOIC (D) - confirm exact suffix pinout
Brand Texas Instruments Texas Instruments

Diferenciadores clave

  • Two amplifiers share one compact 8-pin SOIC package (frente a TLV2316IDR)
  • Supports low-voltage single-supply designs (frente a TLV2316IDR)
  • Ground-referenced input capability (frente a TLV2316IDR)

Notas de diseño

Place the supply-decoupling capacitor close to pins 8 and 4, and route the capacitor current loop without passing through the area used by input and feedback traces. Keep the two amplifier channels physically separate where one channel handles a high-level signal and the other a sensitive low-level signal. The SOIC footprint leaves enough room for short feedback components, but excessive input-loop area can increase noise pickup and susceptibility to oscillation.

Do not equate the 85 kHz gain-bandwidth product with the usable closed-loop bandwidth at every gain. The actual response depends on noise gain, and the 0.02 V/us slew rate limits large-signal transitions. Check the selected feedback resistors against the recommended bias-current and noise-gain constraints. For source impedances above several hundred kilohms, add a dedicated bias-current compensation resistor if the application permits it.

The common-mode input range extending below the negative rail is useful for ground-referenced sensor signals, but it does not guarantee unlimited output swing near either rail. Verify the required output voltage against the load current and supply voltage using the manufacturer output-swing characterization. For capacitive loads, place a small isolation resistor between the amplifier output and the load to reduce the risk of instability.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

Request the current manufacturer declarations and product-specific compliance documents for the TLV2322ID orderable variant.

Datos verificados el: 2026-11-10 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

TLV2322ID datasheet TLV2322ID pinout TLV2322ID datasheet pdf TLV2322ID specifications TLV2322ID SOIC-8 Texas Instruments TLV2322ID TLV2322ID 85kHz TLV2322ID equivalent TLV2322ID replacement TLV2322ID vs TLV2316IDR TLV2322ID price TLV2322ID stock

Componentes & términos relacionados

Texas Instruments TLV2322ID TLV2316IDR operational amplifier dual operational amplifier CMOS operational amplifier analog amplifier IC low-voltage amplifier single-supply operation common-mode input voltage gain-bandwidth product slew rate negative rail positive rail output voltage swing signal conditioning active filter sensor interface 8-pin SOIC SOIC package surface-mount package 3 V supply 5 V supply battery-powered electronics
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ