Texas Instruments

TLV2344ID - Quad 1.7 MHz CMOS Op Amp | Texas Instruments

MPN: TLV2344ID ✓ Aktif
3 V and 5 V single supply Vdss 14-SOIC Package
MOQ: 1 |

TLV2344ID Ringkasan

Texas Instruments TLV2344ID is a quad CMOS operational amplifier with four independent amplifiers, a 14-SOIC package, a typical unity-gain bandwidth of 1.7 MHz, and operation from a single 3 V or 5 V supply. The device combines low-voltage operation with rail-to-rail input and output capability, including common-mode input voltage extending below the negative supply rail and an output range that includes the negative rail.

A CMOS operational amplifier is a voltage-feedback amplifier built with complementary metal-oxide-semiconductor transistors. Its function belongs to the hierarchy of analog amplifier, operational amplifier IC, and signal-conditioning semiconductor. Unlike a general-purpose bipolar amplifier, the TLV2344 family was developed to provide switching-level performance from a low-voltage single supply while approaching the AC performance associated with BiFET operational amplifiers.

The TLV2344ID provides four amplifier channels in one 14-SOIC package. Its typical gain-bandwidth product is 1.7 MHz, making it suitable for audio-frequency signal conditioning, active filtering, sensor amplification, and low-frequency control loops. At a 3 V supply, the device has a typical slew rate of 2.1 V/µs and a typical unity-gain bandwidth of 790 kHz. These figures quantify its speed more directly than generic CMOS classifications and help determine whether a given feedback network can meet bandwidth and settling requirements.

The wide supply range is characterized through 8 V, while 3 V and 5 V single-supply operation are specifically identified. Its common-mode input range extends below the negative rail and to VDD at 25°C, and its output voltage range includes the negative rail. These characteristics are useful in battery-powered systems where signals can approach the lower supply limit and output swing headroom is limited. The four channels can also amplify independent sensors or process multiple stages of a larger analog signal chain.

Typical uses include portable audio amplification, bridge-tied sensor interfaces, active low-pass filters, ADC input conditioning, and general single-supply instrumentation. Designers should verify the exact input and output swing at the selected supply voltage and load, then place input and output components according to the recommended application circuit. A common single-ground bypass capacitor should be placed close to the supply pins, while feedback resistors and compensation networks should remain compact to minimize parasitic effects and preserve bandwidth.

This page combines the TLV2344ID device specifications, package information, sourcing guidance, and application-focused design guidance. It also identifies the limits of drop-in replacement analysis so engineers can distinguish a true pin-compatible substitution from a device that merely has similar headline performance.

Alternatif penggantian untuk TLV2344ID — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

TLV2344Y

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 14-pin SOIC
Same TLV2344 quad-amplifier family and 14-pin SOIC footprint; ordering-suffix grade differences require confirmation against the manufacturer datasheet.

📋 Alternatif referensi (tidak dalam katalog)

TLV2344IP

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 14-pin SOIC
Same TLV2344 family and 14-pin SOIC footprint; the P suffix identifies a different ordering grade, with exact limits requiring datasheet confirmation.

📋 Alternatif referensi (tidak dalam katalog)

TLV2344IDR

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 14-pin SOIC
Identical base device and 14-pin SOIC footprint; the R suffix changes the shipping format rather than the core electrical architecture.

📋 Alternatif referensi (tidak dalam katalog)

TLV2344ID Rating Maksimal & Karakteristik Listrik

Amplifier Count 4 channels
Product Type CMOS operational amplifier
Typical Gain-Bandwidth Product 1.7 MHz
Typical Slew Rate at 3 V 2.1 V/µs
Typical Unity-Gain Bandwidth at 3 V 790 kHz
Low-Voltage Supply Operation 3 V and 5 V single supply
Maximum Characterized Supply Voltage 8 V
Common-Mode Input Range Extends below the negative rail and to VDD at 25°C
Rentang Tegangan Output Includes the negative rail
Paket 14-SOIC
Package Width 3.90 mm (0.154 in)
Tipe Mounting Surface mount
Process Technology CMOS (LinCMOS)
Rail-to-Rail Output Yes; output range includes the negative rail

TLV2344ID 3.90 mm (0.154 in) Diamant Konfigurasi Panduan

Konfigurasi pin untuk TLV2344ID (3.90 mm (0.154 in) pakai pakai). Komponen analog ini memiliki pin masukan, keluaran, dan pengirim daya. Lihat datasheet produsen untuk konfigurasi pin offset null, kompensasi, dan pengaktifan. Ideal untuk peralatan sinyal dan kabel penggandaran.

Diamant diagram pakai pakai 3.90 mm (0.154 in) untuk TLV2344ID

Tidak ada data diatribut pin yang tersedia untuk TLV2344ID.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

TLV2344ID cocok untuk 6 aplikasis: Portable Sensor Signal Conditioning, Low-Frequency Active Filters, ADC and DAC Interface Conditioning, Audio Preamplification, Industrial Control Signal Conditioning, IoT Edge Signal Conditioning.

📱

Portable Sensor Signal Conditioning

The TLV2344ID suits portable sensor front ends that operate from a 3 V or 5 V rail and require more than one conditioning channel. Its four CMOS amplifiers can amplify, filter, or buffer separate sensor signals while keeping the subsystem compact. The 1.7 MHz typical gain-bandwidth product supports moderate-bandwidth closed-loop designs, and the common-mode input range extending below the negative rail helps process signals centered near ground. Keep sensor returns close to the negative supply where appropriate, and verify the actual sensor output range, noise requirements, and settling time before fixing the gain.

🔧

Low-Frequency Active Filters

The four channels in the TLV2344ID can implement cascaded or parallel active-filter stages in portable audio and control systems. A 2.1 V/µs typical slew rate at 3 V and 790 kHz typical unity-gain bandwidth provide useful headroom for moderate-Q low-pass or band-pass networks operating from a single supply. Because the usable closed-loop bandwidth depends on noise gain, calculate each stage's gain and phase margin before finalizing component values. Place resistor and capacitor networks close to the relevant amplifier pins to reduce parasitic feedback and preserve the expected response.

🖥️

ADC and DAC Interface Conditioning

The TLV2344ID can provide input filtering, level shifting, or gain stages around low- and medium-speed converters operating from 3 V or 5 V. Its common-mode input capability below the negative rail is especially useful when signals are biased around the midpoint of a single supply, while the output range including the negative rail can improve utilization of the converter's signal range. Verify the converter's recommended input and output impedance, then confirm that the amplifier can drive the sampling network and settle to the required accuracy within the available conversion interval.

🎧

Audio Preamplification

The TLV2344ID is appropriate for low-level audio preamplification and channel-balancing circuits powered by a single low-voltage rail. Its 1.7 MHz typical gain-bandwidth product and 2.1 V/µs slew rate at 3 V are comfortably above the principal audio band, leaving additional bandwidth for filtering and gain shaping. Common-mode input operation below the negative rail permits source-referenced inputs when biasing is designed correctly. Headroom and distortion checks should use the actual signal amplitude, load impedance, supply voltage, and selected closed-loop gain rather than headline bandwidth alone.

🏭

Industrial Control Signal Conditioning

The quad-channel TLV2344ID can condition four related control signals in an industrial controller, including sensor outputs, current-loop interfaces, or actuator feedback. Single-supply operation at 3 V and 5 V fits compact embedded systems, while the 14-SOIC package consolidates four amplifiers into one component. The amplifier's common-mode and output-swing limits must be checked against the protected industrial signal range, and grounding must prevent switching-node currents from entering the analog input paths. Confirm the system's electrical-overload, temperature, and isolation requirements separately from the amplifier's operating characteristics.

🧩

IoT Edge Signal Conditioning

The TLV2344ID can condition multiple sensor channels before digital conversion in compact IoT edge devices powered from a battery-derived 3 V rail. Four independent amplifiers reduce the number of analog packages needed when the design handles temperature, pressure, motion, or environmental sensing. Low-voltage single-supply operation simplifies rail planning, and the input range below the negative rail supports appropriately biased sensor signals. A practical design should combine short analog routing, local supply bypassing, input overvoltage protection, and firmware-compatible gain settings without relying on the unused amplifier channels as isolated rails.

What is the operating voltage of TLV2344ID?
The TLV2344ID supports single-supply operation at 3 V and 5 V and is characterized over a supply range through 8 V. This makes it suitable for portable, industrial-control, and embedded systems that use low-voltage rails. According to the Texas Instruments TLV2344 family datasheet, operation from a single supply also provides a simple way to bias bipolar input signals around the midpoint of the available supply voltage.
What are the key specifications of TLV2344ID that engineers should know?
The TLV2344ID is a quad CMOS operational amplifier in a 14-SOIC package, with a typical gain-bandwidth product of 1.7 MHz. At a 3 V supply, its typical slew rate is 2.1 V/µs and its typical unity-gain bandwidth is 790 kHz. The four independent channels, common-mode input range extending below the negative rail, and output range including the negative rail are central features for single-supply signal-chain design.
Where can I download the TLV2344ID datasheet PDF?
The TLV2344ID datasheet PDF is available through the linked document on this page, while manufacturer part information can also be located through Texas Instruments. The document describes the TLV2344 quad LinCMOS low-voltage, high-speed operational-amplifier family. Use the pin-description and electrical-characteristics tables to confirm supply limits, input/output swing, stability, and application-circuit details before finalizing a design.
Where can I find the TLV2344ID pinout?
The TLV2344ID uses a 14-SOIC package, and its numbered pin assignments are defined in the manufacturer pin-description table. Use that table when assigning the four amplifier inputs, outputs, supply rails, and bypass connections. This page does not reproduce an unverified pin list, so the schematic should be checked directly against the Texas Instruments TLV2344 family datasheet before PCB routing or footprint approval.
Is TLV2344ID suitable for single-supply ADC input conditioning?
Yes, the TLV2344ID is suitable for many low-speed ADC input-conditioning stages because it supports 3 V and 5 V single-supply operation and can process signals extending below the negative rail. Its typical 1.7 MHz gain-bandwidth product and 2.1 V/µs slew rate at 3 V are useful for moderate-gain filtering or sensor amplification. Confirm the ADC input range, required settling accuracy, and selected feedback network before use.
TLV2344ID vs TLV2344IP - which is better for a new design?
TLV2344ID and TLV2344IP identify ordering variants associated with the same TLV2344 amplifier family and 14-SOIC footprint, so their functional use is generally governed by the same electrical characteristics. The suffix choice should follow the manufacturer ordering table, including temperature grade, packaging, and delivery format. For a new design, confirm the exact suffix required by quality, production, and assembly requirements rather than treating the suffix change as an electrical upgrade.
When should I choose TLV2344ID over a single or dual op amp?
Choose the TLV2344ID when the design needs four independent amplifiers and can use one 14-SOIC footprint instead of multiple single or dual packages. This can simplify board layout and reduce component count for sensor arrays, multi-stage filters, or quad-channel instrumentation. If only one or two channels are required, a lower-channel-count device may provide a more economical solution and avoid unused amplifier inputs.
What is the best drop-in replacement for TLV2344ID?
A drop-in replacement must use the same 14-SOIC footprint, preserve pin-to-pin connections, and remain close to the TLV2344ID in supply range, bandwidth, slew rate, input range, output swing, and stability behavior. Equivalent headline bandwidth alone is not sufficient. No independently verified cross-manufacturer substitute is identified here, so use the Texas Instruments cross-reference search to confirm a candidate before treating it as a drop-in replacement.
Can TLV2344ID replace a TL072-style quad amplifier?
A TL072-style amplifier cannot automatically replace the TLV2344ID because input bias current, common-mode range, output swing, supply behavior, and noise characteristics can differ substantially even when both devices contain four amplifiers. The TLV2344ID is a CMOS device intended for low-voltage single-supply operation. Confirm the original device's pinout and electrical requirements, then revalidate biasing, noise, stability, and output loading before replacement.
What can replace TLV2344ID?
The strongest replacement candidate is a 14-pin quad operational amplifier with the same pin-to-pin assignments and closely matched bandwidth, slew rate, common-mode range, output swing, and supply-current behavior. No candidate is listed as a confirmed substitute because the available cross-reference results do not establish those electrical conditions for a specific part number. Search by the exact 14-SOIC footprint and compare the critical parameters, then verify settling and stability in the target circuit.
Is TLV2344ID the same as TLV2344IP?
No, TLV2344ID and TLV2344IP are distinct ordering suffixes for the TLV2344 quad operational-amplifier family. Both are associated with the 14-SOIC package, but the ordering information can encode different temperature, packing, or delivery options. Use the manufacturer's ordering table for the exact production suffix. The suffix alone should not be interpreted as a change in the basic amplifier function.
How much bypass capacitance does the TLV2344ID require?
The required bypass network should follow the manufacturer datasheet's recommended application circuit because the optimum capacitor type and value depend on supply impedance, noise goals, and stability requirements. Place the supply-bypass capacitor as close as practical to the positive and negative supply pins, and keep the return path short. Verify transient response and output stability with the actual load and board parasitics.
What is the TLV2344ID slew rate and unity-gain bandwidth?
At a 3 V supply, the TLV2344 family has a typical slew rate of 2.1 V/µs and a typical unity-gain bandwidth of 790 kHz. The family-level typical gain-bandwidth product is 1.7 MHz. These speed figures make the device appropriate for audio and other moderate-frequency signal paths, but closed-loop bandwidth also depends on the selected noise gain and feedback network.
Is TLV2344ID in stock and what is the lead time?
Current stock and lead time are not stated as a fixed manufacturer commitment and can vary by quantity and order configuration. Use the Request a Quote form on this page to ask for current availability, minimum order quantity, and a delivery estimate for the exact TLV2344ID suffix. Do not rely on a historical distributor inventory count when scheduling production.
What is the price of TLV2344ID?
Use the Request a Quote form on this page for the current TLV2344ID price and quantity availability. Pricing depends on order quantity, package suffix, date, and market conditions, so a static figure can become stale or misleading. The form also allows the requested quantity, delivery schedule, and target shipment details to be specified for a more useful quotation.
Does TLV2344ID meet RoHS and automotive requirements?
RoHS, REACH, AEC-Q100 qualification, lead-free status, and halogen-free status are not established by the cited product information. Treat these attributes as unknown until confirmed on the current Texas Instruments product page or the manufacturer's compliance documentation. Automotive use should not be inferred from the industrial-ordering suffix alone; AEC-Q100 qualification must be explicitly documented for the exact orderable part.

Data referensi engineering untuk TLV2344ID — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the TLV2344ID when a compact 14-SOIC design needs four independent CMOS amplifiers operating from a 3 V or 5 V single supply. Its typical 1.7 MHz gain-bandwidth product, 2.1 V/µs slew rate at 3 V, common-mode input range extending below the negative rail, and output range including the negative rail make it useful for sensor conditioning, active filtering, audio preamplification, and converter interfaces. Use a single or dual amplifier when fewer channels are needed, because unused channels add cost and board area. When considering a replacement, require the same 14-SOIC footprint and verify pin assignments, supply range, common-mode range, output swing, bandwidth, slew rate, stability, noise, and bias current. A similar bandwidth or package alone does not establish drop-in compatibility. For automotive production, confirm explicit AEC-Q100 qualification and all environmental requirements for the exact ordering suffix.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini
Brand Texas Instruments
Package 14-SOIC
Amplifier Count 4 channels
Typical Gain-Bandwidth Product 1.7 MHz
Typical Slew Rate at 3 V 2.1 V/µs
Typical Unity-Gain Bandwidth at 3 V 790 kHz
Low-Voltage Supply Operation 3 V and 5 V single supply
Maximum Characterized Supply Voltage 8 V
Process Technology CMOS (LinCMOS)

Catatan Desain

Place the supply-bypass capacitor as close as practical to the positive and negative supply pins, and keep its ground return short and directly tied to the device ground. Use the capacitor type and value recommended in the manufacturer application circuit. Avoid routing sensitive input and feedback nets beneath or alongside switching-supply traces because capacitive coupling can increase output noise or disturb low-level sensor signals.

Do not interpret the common-mode input range extending below the negative rail as permission to exceed the absolute maximum input voltage. Check every source for operation outside the supply rails, shutdown discharge, and hot-plug conditions. In battery systems, protect inputs against ESD and accidental overvoltage before the signal reaches the amplifier, because internal clamps can conduct and disturb the source when the input exceeds a valid range.

Keep feedback resistors and compensation capacitors compact and connect them directly to the relevant amplifier pins. The usable closed-loop bandwidth depends on noise gain, so a 790 kHz typical unity-gain bandwidth at 3 V does not guarantee the same bandwidth at higher gain. Simulate the complete feedback network with expected load capacitance and PCB parasitics when precise settling time is required.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

Compliance attributes are not stated in the cited product information and must be confirmed on the current manufacturer product page or compliance documentation.

Pencarian Terkait

TLV2344ID datasheet TLV2344ID pinout TLV2344ID datasheet pdf TLV2344ID 14-SOIC TLV2344ID 1.7 MHz TLV2344ID 3 V 5 V TLV2344ID slew rate Texas Instruments TLV2344ID TLV2344ID equivalent TLV2344ID replacement TLV2344ID cross reference TLV2344ID application circuit TLV2344ID price TLV2344ID stock TLV2344ID lead time

Komponen dan Istilah Terkait

Texas Instruments TLV2344ID TLV2344 TLV2344IP quad operational amplifier CMOS operational amplifier LinCMOS voltage-feedback amplifier analog amplifier IC signal-conditioning semiconductor 14-SOIC SOIC family surface-mount package single-supply operation unity-gain bandwidth gain-bandwidth product slew rate common-mode input voltage range rail-to-rail output active filter sensor signal conditioning audio preamplifier ADC input conditioning battery-powered electronics
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ