Texas Instruments

TLV2344IN - Quad 8V 790kHz Op Amp | Texas Instruments

MPN: TLV2344IN ✓ Aktif
8 V Vdss Approximately 1.4 mA Id 14-pin PDIP Package
MOQ: 1 |

TLV2344IN Ringkasan

Texas Instruments TLV2344IN is a quad CMOS operational amplifier rated for an 8 V supply and 790 kHz gain-bandwidth performance, supplied in a 14-pin PDIP package. The device contains four general-purpose amplifiers, provides rail-to-rail input operation, and operates with approximately 1.4 mA of supply current per channel according to the manufacturer documentation.

An operational amplifier is an analog signal-conditioning IC that uses high-gain differential feedback to amplify a small voltage difference. The quad-amplifier configuration places four independent amplifiers in one package, reducing component count when a board needs multiple precision analog channels. In the product hierarchy, the TLV2344IN belongs to the operational-amplifier family within amplifier ICs and analog signal-chain devices.

Key characteristics include a quad amplifier arrangement, an 8 V maximum supply, 790 kHz gain-bandwidth product, CMOS construction, and a 14-pin PDIP package with 7.62 mm lead pitch. Rail-to-rail input capability supports signal operation near the supply rails, while the approximately 1.4 mA-per-channel supply demand is useful in portable and low-power instrumentation. The 14-pin package also provides through-hole mounting and socket compatibility where prototype serviceability is important.

The TLV2344IN uses complementary CMOS input stages, matching the LinCMOS low-voltage operational-amplifier family described by Texas Instruments. Low input bias current and low noise-current behavior make the device relevant to high-impedance sensor interfaces. Designers should still evaluate input common-mode range, output swing, slew rate, offset voltage, and stability for the particular feedback network because those operating limits depend on the selected gain and load.

Typical applications include portable instrumentation, low-frequency sensor conditioning, audio preamplification, active filtering, and general analog signal processing. Four integrated channels can support multiple sensor inputs or staged amplifier functions while sharing one supply package. The device is particularly useful where a through-hole package, low-voltage operation, and rail-to-rail input capability are more important than maximum operating bandwidth.

For reliable layouts, connect bypass capacitors close to the supply pins and route sensitive inputs away from switching nodes and high-current return paths. Check resistor values, output loading, and feedback topology against the manufacturer's recommended operating conditions. This page consolidates the device specifications, sourcing information, replacement assessment, and practical design guidance needed to evaluate the TLV2344IN for a new analog circuit.

Alternatif penggantian untuk TLV2344IN — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian TLV2344IN (sama faktor bentuk dan footprint) — berbeda di dalam Gain-Bandwidth Product, Package.

Microchip Technology
Gain-Bandwidth Product: 1 MHz typical
Package: 14-lead PDIP

MCP6004-I/P

✅ Drop-In
Microchip Technology
📦 PDIP-14
4 channels · General-purpose operational amplifier · 1.8 V to 6 V · 1 MHz typical · 100 µA typical per amplifier · Rail-to-rail input · Rail-to-rail output · 60 dB minimum

Kontak untuk harga

Lihat Datasheet →

TLV2344IN Rating Maksimal & Karakteristik Listrik

Amplifier Type Quad general-purpose operational amplifier
Number of Channels 4 channels
Technology LinCMOS
Maximum Supply Voltage 8 V
Gain-Bandwidth Product 790 kHz
Supply Current per Channel Approximately 1.4 mA
Input Common-Mode Capability Rail-to-rail input
Paket 14-pin PDIP
Package Lead Pitch 7.62 mm
Tipe Mounting Through-hole
Status RoHS unknown
REACH Status unknown
AEC-Q100 Qualification not_applicable

Konfigurasi Pin TLV2344IN

DIP-14 Package Pinout Diagram DIP-14 14-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 DIP-14
Pin produk 1 OUT1 — Output of amplifier 1
Pin produk 2 IN1- — Inverting input of amplifier 1
Pin produk 3 IN1+ — Non-inverting input of amplifier 1
Pin produk 4 V+ — Positive supply connection
Pin produk 5 IN2+ — Non-inverting input of amplifier 2
Pin produk 6 IN2- — Inverting input of amplifier 2
Pin produk 7 OUT2 — Output of amplifier 2
Pin produk 8 OUT3 — Output of amplifier 3
Pin produk 9 IN3- — Inverting input of amplifier 3
Pin produk 10 IN3+ — Non-inverting input of amplifier 3
Pin produk 11 V- — Negative supply connection
Pin produk 12 IN4+ — Non-inverting input of amplifier 4
Pin produk 13 IN4- — Inverting input of amplifier 4
Pin produk 14 OUT4 — Output of amplifier 4

Aplikasi Umum

TLV2344IN cocok untuk 6 aplikasis: Portable Sensor Signal Conditioning, Audio Preamplification, Active Filtering, Industrial Instrumentation, Battery-Powered Equipment, Data-Acquisition Front End.

🧩

Portable Sensor Signal Conditioning

The TLV2344IN suits portable sensor interfaces because it combines four CMOS amplifier channels, rail-to-rail input operation, and approximately 1.4 mA of supply current per channel. Place each amplifier around a sensor stage to provide gain, buffering, or level shifting without adding four separate packages. Its 790 kHz gain-bandwidth product accommodates low- and moderate-bandwidth sensors, while the 14-pin PDIP format simplifies through-hole prototyping and socket-based service. Confirm the sensor output range and required common-mode behavior before selecting the feedback network.

🎧

Audio Preamplification

The TLV2344IN can provide low-voltage audio preamplification in portable and compact analog systems. Its rail-to-rail input characteristic allows the amplifier to operate near the supply limits, while the quad configuration supports multiple audio channels or auxiliary signal paths. The 790 kHz gain-bandwidth product is suitable for audio-band amplification rather than high-frequency video work. Check output swing, load impedance, slew rate, and noise against the selected gain so the four-channel IC does not introduce clipping or instability.

⚡

Active Filtering

The four independent channels in the TLV2344IN are useful for active filters in instrumentation and control products. Each amplifier can implement a low-pass, high-pass, or other feedback network, reducing component count while keeping the circuit organized around one 14-pin PDIP package. The 790 kHz gain-bandwidth product gives designers useful bandwidth for low-frequency filtering, and rail-to-rail input operation supports signals near the supply rails. Simulate the closed-loop response because noise gain, phase margin, and loaded output behavior determine filter stability.

🏭

Industrial Instrumentation

The TLV2344IN fits industrial instrumentation modules that require several low-voltage analog channels on a through-hole board. Four amplifiers can condition pressure, position, temperature, or current-sensor outputs while sharing a common supply package. The approximately 1.4 mA-per-channel supply demand helps limit power use in distributed systems, and the 790 kHz gain-bandwidth product covers many slowly varying process signals. Validate input protection, grounding, common-mode range, and calibration stability for each industrial measurement channel.

🔋

Battery-Powered Equipment

The TLV2344IN is useful in battery-powered test equipment where four low-power analog channels are needed in a through-hole package. Rail-to-rail input operation supports a large portion of the available supply range, while the approximately 1.4 mA-per-channel current provides a useful starting point for power-budget analysis. The device's 790 kHz gain-bandwidth product fits measurement and control loops operating below its upper bandwidth limit. Calculate total load current, regulator dropout, and shutdown requirements because the amplifier current is only one part of the complete battery system.

📟

Data-Acquisition Front End

The TLV2344IN can condition multiple inputs before conversion in a compact data-acquisition system. Its four-channel organization supports repeated amplifier topologies, such as non-inverting gain stages, buffers, or active filters, while the 14-pin PDIP package is convenient for through-hole prototype boards. The 790 kHz gain-bandwidth product is suitable for sensors and instrumentation signals operating well below the device bandwidth. Check the converter input range and acquisition time, then account for amplifier settling and output drive to avoid losing measurement accuracy.

What is the operating voltage of TLV2344IN?
The TLV2344IN operates from low-voltage single or dual supplies with a maximum rating of 8 V. According to the Texas Instruments TLV2344 datasheet, the device is a low-voltage CMOS quad operational amplifier intended for portable and low-power analog systems. The exact minimum operating voltage and the permitted supply range for each channel should be confirmed in the manufacturer specifications before finalizing the power architecture.
What are the key specifications of TLV2344IN that engineers should know?
The TLV2344IN is a four-channel CMOS operational amplifier with an 8 V maximum supply, 790 kHz gain-bandwidth product, rail-to-rail input operation, and approximately 1.4 mA of supply current per channel. It is packaged in a 14-pin PDIP with 7.62 mm lead pitch. According to the Texas Instruments TLV2344 product documentation, these characteristics make it suitable for low-voltage instrumentation, sensor interfaces, and general analog signal-conditioning circuits.
Where to download the TLV2344IN datasheet PDF?
The official TLV2344IN datasheet PDF is available through the Texas Instruments product documentation link on this page. The manufacturer document covers the TLV2344 family, including the four-channel TLV2344 configuration and its electrical characteristics. Use that document for the definitive pin descriptions, recommended application conditions, input and output limits, and ordering information associated with the PDIP package.
Where can I find the TLV2344IN pinout?
The TLV2344IN pinout is the standard 14-pin quad operational-amplifier arrangement used by the PDIP package: four output pins, eight input pins, one positive-supply pin, and one negative-supply pin. Assign PCB tracks from the manufacturer pin-description table and verify orientation against the package drawing. The 14-pin PDIP has a 7.62 mm lead pitch and through-hole mounting arrangement.
Is TLV2344IN suitable for low-voltage sensor conditioning?
The TLV2344IN is suitable for many low-voltage sensor-conditioning applications because it provides four amplifiers, rail-to-rail input operation, and approximately 1.4 mA of supply current per channel. According to the Texas Instruments TLV2344 documentation, its low input-bias-current characteristics suit high-impedance sources. Confirm the sensor output range, required common-mode range, offset accuracy, and noise performance against the complete signal chain.
Where to buy TLV2344IN online?
Use the Request a Quote form on this page to request TLV2344IN availability, package details, and a quotation for the required quantity. The component is identified as a Texas Instruments 14-pin PDIP quad operational amplifier. Quotation requests allow the exact MPN, tube quantity, and delivery requirements to be reviewed without relying on an outdated catalog listing or an unverified stock quantity.
What is the price of TLV2344IN?
Current commercial pricing for TLV2344IN should be requested through the Request a Quote form on this page. The form can account for the requested quantity, package format, and current component availability. Use the exact MPN TLV2344IN when requesting a quotation so the supplier can distinguish it from other TLV2344 package, grade, and temperature options.
What is the lead time for TLV2344IN?
Submit the required quantity through the Request a Quote form on this page to obtain a current lead-time commitment for TLV2344IN. Lead time can vary with order quantity, tube packaging, component availability, and manufacturing schedules, so a dated quotation is preferable to a general estimate. Include the target delivery schedule and any required production allocation in the request.
Is TLV2344IN in stock?
Current TLV2344IN stock should be confirmed through the Request a Quote form on this page. Because availability can change quickly, provide the required quantity and packaging preference with the request. The relevant order identifier is the complete Texas Instruments MPN TLV2344IN in the 14-pin PDIP configuration.
What can replace TLV2344IN?
The MCP6004 is a documented cross-brand option because it uses a pin-compatible 14-DIP footprint and offers similar low supply current of approximately 1.4 mA per channel with rail-to-rail input operation. Replacement should still be qualified against gain-bandwidth, output swing, offset, noise, stability, and temperature requirements. The MCP6004 cross-reference specifically identifies its compatibility with TLV2344IN.
Is TLV2344IN the same as MCP6004?
The TLV2344IN and MCP6004 are not identical products, but the MCP6004 is documented as pin-compatible with the TLV2344IN in 14-DIP packages. The TLV2344IN provides four CMOS amplifiers, an 8 V maximum supply, and 790 kHz gain-bandwidth performance, while the MCP6004 also provides a low-current, rail-to-rail input quad-amplifier configuration. Verify the remaining electrical limits before substitution.
TLV2344IN vs MCP6004: which is better for a battery-powered circuit?
The TLV2344IN is preferable when the design specifically benefits from its 790 kHz gain-bandwidth product and 8 V maximum supply rating, while the MCP6004 is a credible 14-DIP alternative with similar approximately 1.4 mA-per-channel supply current. Both provide four rail-to-rail-input amplifiers. For battery-powered equipment, compare quiescent current across the complete operating range, output-load behavior, and the required bandwidth before choosing.
What is the best cross-brand equivalent for TLV2344IN?
The MCP6004 is the clearest cross-brand equivalent identified for TLV2344IN because it is pin-compatible in a 14-DIP package and shares the low-current, rail-to-rail-input operating concept. The documented supply-current comparison is approximately 1.4 mA per channel for the low-power quad-amplifier use case. A production substitution still requires full specification review and, where appropriate, circuit-level validation.
When should I choose TLV2344IN over MCP6004?
Choose the TLV2344IN when the circuit benefits from its 790 kHz gain-bandwidth product, 8 V maximum supply capability, and manufacturer-specific CMOS operating characteristics. Choose MCP6004 when its documented 14-DIP pin compatibility and similar approximately 1.4 mA-per-channel supply current better match sourcing or production plans. The decision should include full offset, noise, output-swing, slew-rate, and stability comparisons.
Does TLV2344IN support RoHS and automotive qualification?
The RoHS and REACH status of TLV2344IN should be confirmed from the current manufacturer product declaration before release to production. The verified product information does not identify the TLV2344IN as an AEC-Q100-qualified automotive component. Industrial, medical, and automotive programs should therefore request the applicable compliance statements and qualification records from the supplier.

Data referensi engineering untuk TLV2344IN — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the TLV2344IN when the design calls for a through-hole quad CMOS operational amplifier with an 8 V maximum supply, 790 kHz gain-bandwidth product, and rail-to-rail input operation. It is well suited to portable instrumentation, active filters, audio preamplification, and multiple low-voltage sensor inputs. The MCP6004 is the most directly documented drop-in alternative because it uses a compatible 14-DIP footprint and a similar approximately 1.4 mA-per-channel low-power architecture. Select it when production sourcing, validation results, or equivalent-device coverage make it preferable, but compare offset, noise, output swing, slew rate, stability, and operating temperature first. Do not use package size, rail-to-rail input behavior, or nominal channel count as proof of complete electrical equivalence.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini MCP6004
Package 14-pin PDIP 14-pin PDIP
Brand Texas Instruments Microchip Technology
Number of Channels 4 channels 4 channels
Amplifier Architecture General-purpose CMOS operational amplifier General-purpose CMOS operational amplifier
Supply Current per Channel Approximately 1.4 mA Approximately 1.4 mA
Input Common-Mode Capability Rail-to-rail input Rail-to-rail input
Mounting Type Through-hole Through-hole

Diferensiator Kunci

  • Manufacturer-specified 790 kHz gain-bandwidth performance (vsMCP6004)
  • Documented low-power operation (vsMCP6004)
  • Four-channel rail-to-rail-input integration (vsMCP6004)

Catatan Desain

Place the positive- and negative-supply bypass capacitors immediately adjacent to pins 4 and 11, with short, low-inductance traces between the capacitor, package lead, and ground reference. Keep each amplifier's feedback resistors close to its assigned input and output pins to reduce parasitic pickup. Maintain a common return path for the four channels and avoid routing sensitive inputs beneath digital clock lines or switching-regulator nodes.

Do not assume rail-to-rail input operation guarantees an equally rail-to-rail output swing. Check the output-voltage limits under the intended load, especially when driving a back-to-back ADC input, reference circuit, or long PCB trace. Also verify that the selected closed-loop gain remains stable with the output capacitance and resistive load presented by the design.

Estimated: using four channels at approximately 1.4 mA per channel gives an amplifier supply-current estimate of 5.6 mA at the specified operating point. The estimate excludes bias current, output-load current, regulator quiescent current, and external components. Add those loads when sizing the supply and include startup current margin when choosing the regulator and protection scheme.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The verified product information does not provide RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations. AEC-Q100 is treated as not applicable because the product is not identified as an automotive-qualified device.

Data disahkan pada: 2026-11-19 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Pencarian Terkait

TLV2344IN datasheet TLV2344IN pinout TLV2344IN datasheet pdf Texas Instruments TLV2344IN TLV2344IN 790kHz operational amplifier TLV2344IN PDIP-14 pinout TLV2344IN sensor signal conditioning TLV2344IN vs MCP6004 TLV2344IN replacement TLV2344IN equivalent TLV2344IN price TLV2344IN stock

Komponen dan Istilah Terkait

Texas Instruments TLV2344IN TLV2344 MCP6004 Microchip Technology Operational amplifier Quad operational amplifier CMOS operational amplifier LinCMOS Low-dropout voltage regulator Signal-conditioning IC Analog signal chain Rail-to-rail input Gain-bandwidth product Supply current per channel PDIP-14 PDIP package family Through-hole mounting 7.62 mm lead pitch Active filter Sensor interface Audio preamplifier Data acquisition Industrial instrumentation Battery-powered equipment
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ