TLV2471ID - 6V 2.8MHz RRIO Operational Amplifier | Texas Instruments
MPN: TLV2471ID ✓ AktifTLV2471ID Ringkasan
A rail-to-rail input and output, or RRIO, operational amplifier is an analog amplifier whose input common-mode range and output swing can approach the supply rails. This capability simplifies circuit design when the signal can approach the limits of a 6 V supply. The TLV2471 family belongs to the operational-amplifier category, which sits within amplifier ICs and broader analog and mixed-signal semiconductor systems.
The TLV2471ID's principal features include a 6 V maximum supply, 2.8 MHz gain-bandwidth product, 600 µA per channel supply consumption, and rail-to-rail input and output operation. Its high-drive architecture is intended to improve output-current capability while retaining a low-power operating profile. The single-amplifier configuration also reduces board area when only one signal channel requires amplification.
At the device level, the 2.8 MHz gain-bandwidth product provides more bandwidth than a very-low-frequency precision amplifier and more integration than a discrete transistor stage. Its 600 µA per channel supply current is appropriate for battery-operated and portable systems where amplifier power can dominate the load. Because the TLV2471ID is not specified as a micropower rail-to-rail amplifier in the 6 V family, applications requiring substantially lower supply current should compare it with dedicated low-power alternatives.
Typical uses include low-level sensor amplification, current-loop signal conditioning, audio and communication interfaces, buffered analog controls, and portable test equipment. The 8-pin SOIC package supports conventional surface-mount assembly and is suitable for prototypes as well as production boards. Its rail-to-rail behavior is especially useful when the signal source can operate close to either supply rail.
Designers should verify the required input range, output swing, capacitive-load stability, and operating temperature against the manufacturer datasheet before fixing the circuit. Input and output placement should minimize trace resistance and sensitive-node capacitance. For gain or offset networks, use stable resistor values and account for input bias current, output loading, and supply-headroom requirements.
This page organizes the TLV2471ID's electrical characteristics, package details, pin information, drop-in alternatives, comparison parameters, and practical design guidance. It also identifies where application-specific electrical limits must be confirmed in the manufacturer datasheet before schematic release.
Alternatif penggantian untuk TLV2471ID — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian TLV2471ID (sama faktor bentuk dan footprint) — berbeda di dalam Operating Temperature Range.
TLV2471CD
✅ Drop-InKontak untuk harga
Lihat Datasheet →TLV2471AIDR
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
TLV2472ID
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
TLV2472AID
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
TLV2471ID Rating Maksimal & Karakteristik Listrik
| Amplifier Type | Single operational amplifier |
| Number of Circuits | 1 circuit |
| Maximum Supply Voltage | 6 V |
| Gain-Bandwidth Product | 2.8 MHz |
| Supply Current per Channel | 600 µA |
| Input Type | Rail-to-rail |
| Tipe Output | Rail-to-rail |
| Technology | CMOS |
| Paket | 8-pin SOIC (D) |
| Jumlah Pin | 8 pins |
| Tipe Mounting | Surface mount |
| Package Height | 1.75 mm |
| Rentang Suhu Kerja | -40 °C to +125 °C |
TLV2471ID 1.75 mm Diamant Konfigurasi Panduan
Konfigurasi pin untuk TLV2471ID (1.75 mm pakai pakai). Komponen analog ini memiliki pin masukan, keluaran, dan pengirim daya. Lihat datasheet produsen untuk konfigurasi pin offset null, kompensasi, dan pengaktifan. Ideal untuk peralatan sinyal dan kabel penggandaran.
Tidak ada data diatribut pin yang tersedia untuk TLV2471ID.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
TLV2471ID cocok untuk 6 aplikasis: Portable Sensor Signal Conditioning, Industrial Process Control, Low-Level Analog Buffering, Battery-Powered Measurement Equipment, Audio and Communication Interface, Data Acquisition Front End.
Portable Sensor Signal Conditioning
The TLV2471ID suits portable sensor front ends because it combines rail-to-rail input and output operation with a supply current of 600 µA per channel. Place the amplifier between a bridge, resistive sensor, or low-level transducer and the system ADC to provide gain without requiring a mid-rail input. Its 2.8 MHz gain-bandwidth product supports moderate-frequency sensor dynamics while the 6 V maximum supply simplifies compatibility with low-voltage systems. Because it is not a dedicated micropower amplifier, verify that the amplifier’s continuous current and the ADC’s operating demand fit the available battery budget. Confirm common-mode range, input offset, bias current, and output-swing requirements in the manufacturer datasheet before production release.
Direkomendasikan
Industrial Process Control
The TLV2471ID can condition low-level process signals in industrial control systems operating across a -40 °C to +125 °C temperature range. Its rail-to-rail inputs accept signals near the supply boundaries more effectively than a conventional non-RRIO amplifier, while the 2.8 MHz gain-bandwidth product provides useful margin for moderately fast feedback loops. Use it for pressure, temperature, or current-transducer interfaces where a single amplifier channel is sufficient. Validate the final input range, output swing, noise performance, and isolation strategy against the process environment. The SOIC package is suitable for conventional surface-mount assembly, but thermal and grounding practices remain important near power converters and motor-control circuitry.
Direkomendasikan
Low-Level Analog Buffering
The TLV2471ID works as a low-level analog buffer when a sensor or divider cannot directly drive the next circuit. Rail-to-rail input and output behavior improves usable signal range, while the 600 µA per channel supply current supports conservative power budgets. The 2.8 MHz gain-bandwidth product is more than adequate for many instrumentation and control paths and allows unity-gain operation without requiring a high-speed discrete stage. Choose resistor values that preserve the required gain accuracy and check the datasheet’s capacitive-load and output-drive limits. When driving long traces or sampling nodes, place the amplifier close to the source and add only the capacitance required by the connected circuit.
Direkomendasikan
Battery-Powered Measurement Equipment
The TLV2471ID is appropriate for handheld meters and compact measurement instruments that need rail-to-rail signal access without a fast-switching converter. Its 600 µA per channel supply current is lower than many general-purpose precision amplifiers, while 2.8 MHz gain-bandwidth product provides more bandwidth than typical micropower devices. Use one stage to amplify a transducer or bridge output before an ADC, and power it from the same low-voltage rail as the converter when the output range permits. Calculate average consumption from the amplifier current, ADC activity, display load, and regulator quiescent current. Also confirm whether shutdown or power-gating is required at the system level, because that function must be verified in the manufacturer datasheet.
Direkomendasikan
Audio and Communication Interface
The TLV2471ID can serve as a general-purpose gain stage or impedance buffer in modest audio and communication interfaces. Its rail-to-rail output supports useful swing at low supply voltages, while the 2.8 MHz gain-bandwidth product covers many voice-band and low-frequency control signals. The device’s 600 µA per channel current is helpful in portable equipment, although the high-drive architecture should not be interpreted as a full-power audio output stage. Confirm output-current capability, output-voltage range, noise, and stability into the actual load before use. Keep feedback traces short, return grounds cleanly beneath the analog section, and isolate switching-regulator and digital clocks from sensitive input nodes.
Direkomendasikan
Data Acquisition Front End
The TLV2471ID is useful as a driver or gain stage ahead of an ADC in compact data-acquisition systems. Rail-to-rail inputs accommodate signals that move close to the supply rails, and the 2.8 MHz gain-bandwidth product provides bandwidth for many moderate-rate sampling systems. Place the device close to the ADC input to minimize trace pickup, use short feedback paths, and select input and output networks that account for the ADC’s sampling behavior. The amplifier can also buffer a reference or drive a higher-impedance front end, provided its output capability meets the required load. Check the manufacturer datasheet for settling, output-drive, and capacitive-load limits, and verify that the 600 µA supply current is acceptable for the acquisition channel.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk TLV2471ID — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | TLV2471CD | TLV2471AIDR | TLV2472ID | TLV2472AID |
|---|---|---|---|---|---|
| Package | SOIC-8 (D) | SOIC-8 (D) | SOIC-8 (D) | SOIC-8 (D) | SOIC-8 (D) |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Amplifier Configuration | Single | Single | Single | Dual | Dual |
| Number of Circuits | 1 | 1 | 1 | 2 | 2 |
| Maximum Supply Voltage | 6 V | 6 V | 6 V | 6 V | 6 V |
| Gain-Bandwidth Product | 2.8 MHz | 2.8 MHz | 2.8 MHz | 2.8 MHz | 2.8 MHz |
| Supply Current per Channel | 600 µA | 600 µA | 600 µA | 600 µA | 600 µA |
| Input Common-Mode Range | Rail-to-rail | Rail-to-rail | Rail-to-rail | Rail-to-rail | Rail-to-rail |
| Output Swing | Rail-to-rail | Rail-to-rail | Rail-to-rail | Rail-to-rail | Rail-to-rail |
| Operating Temperature Range | -40 °C to +125 °C | -40 °C to +125 °C | -40 °C to +125 °C | -40 °C to +125 °C | -40 °C to +125 °C |
Diferensiator Kunci
- Single-amplifier configuration reduces unused channel area (vsTLV2472ID)
- Combines 2.8 MHz bandwidth with 600 µA per channel consumption (vsTLV2471CD)
- Single-channel alternative matches the same 8-pin SOIC footprint (vsTLV2471AIDR)
Catatan Desain
Place the TLV2471ID close to the sensor or ADC interface, with the input and feedback traces kept short and away from switching nodes. Route the return path beneath the amplifier and analog ground region to reduce injected noise. Decoupling capacitors should be located at the device supply pins and connected through short, low-inductance paths. Because the available information does not specify a recommended capacitor value, determine the final value from the manufacturer power-supply recommendations and the circuit’s operating bandwidth.
Do not assume that rail-to-rail input operation guarantees full rail-to-rail output swing under every load. Check the output-voltage limits, output-current capability, and capacitive-load stability in the manufacturer datasheet for the selected supply and load. Also verify the minimum operating supply voltage before designing a circuit around a 3.3 V or lower rail. These checks are especially important when the output drives an ADC, relay, cable, or capacitive sensor connection.
Use stable feedback-gain values and avoid excessively high source impedances because bias-current and offset effects can degrade signal accuracy. For driving an ADC, place the amplifier near the converter and account for charge injection through a small isolation resistor when the sampling network requires it. Check settling behavior at the required gain and signal frequency. Ground and power-return paths should be arranged so switching currents do not share sensitive analog return segments with the amplifier.
Informasi Konformitas
No explicit compliance declarations are present in the manufacturer page or distributor snippets. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status using the manufacturer product documentation before procurement.