Texas Instruments

TLV2471ID - 6V 2.8MHz RRIO Operational Amplifier | Texas Instruments

MPN: TLV2471ID ✓ Aktif
6 V Vdss 600 µA Id 8-pin SOIC (D) Package
MOQ: 1 |

TLV2471ID Genel Bakış

Texas Instruments TLV2471ID is a single 6 V, 2.8 MHz rail-to-rail input and output operational amplifier packaged in an 8-pin SOIC. It combines low supply current of 600 µA per channel with 2.8 MHz gain-bandwidth product, making it suitable for portable instrumentation, sensor conditioning, and general-purpose analog signal paths. The amplifier supports one circuit and uses CMOS-based signal processing for low-power operation.

A rail-to-rail input and output, or RRIO, operational amplifier is an analog amplifier whose input common-mode range and output swing can approach the supply rails. This capability simplifies circuit design when the signal can approach the limits of a 6 V supply. The TLV2471 family belongs to the operational-amplifier category, which sits within amplifier ICs and broader analog and mixed-signal semiconductor systems.

The TLV2471ID's principal features include a 6 V maximum supply, 2.8 MHz gain-bandwidth product, 600 µA per channel supply consumption, and rail-to-rail input and output operation. Its high-drive architecture is intended to improve output-current capability while retaining a low-power operating profile. The single-amplifier configuration also reduces board area when only one signal channel requires amplification.

At the device level, the 2.8 MHz gain-bandwidth product provides more bandwidth than a very-low-frequency precision amplifier and more integration than a discrete transistor stage. Its 600 µA per channel supply current is appropriate for battery-operated and portable systems where amplifier power can dominate the load. Because the TLV2471ID is not specified as a micropower rail-to-rail amplifier in the 6 V family, applications requiring substantially lower supply current should compare it with dedicated low-power alternatives.

Typical uses include low-level sensor amplification, current-loop signal conditioning, audio and communication interfaces, buffered analog controls, and portable test equipment. The 8-pin SOIC package supports conventional surface-mount assembly and is suitable for prototypes as well as production boards. Its rail-to-rail behavior is especially useful when the signal source can operate close to either supply rail.

Designers should verify the required input range, output swing, capacitive-load stability, and operating temperature against the manufacturer datasheet before fixing the circuit. Input and output placement should minimize trace resistance and sensitive-node capacitance. For gain or offset networks, use stable resistor values and account for input bias current, output loading, and supply-headroom requirements.

This page organizes the TLV2471ID's electrical characteristics, package details, pin information, drop-in alternatives, comparison parameters, and practical design guidance. It also identifies where application-specific electrical limits must be confirmed in the manufacturer datasheet before schematic release.

Drop-in alternatifler için TLV2471ID — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller TLV2471ID (aynı form faktörü ve ayağa oturma) — farklı olan Operating Temperature Range.

Texas Instruments
Operating Temperature Range: 0 C to 70 C
İle Karşılaştır TLV2471ID →

TLV2471CD

✅ Yerleştirme
Texas Instruments
📦 SOIC-8 (D)
Single operational amplifier · Up to 6 V · 2.8 MHz · 600 uA per channel · Rail-to-rail · Rail-to-rail · CMOS · 1 channel

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

TLV2471AIDR

✅ Yerleştirme
📦 SOIC-8 (D)
Same 2.8 MHz RRIO family in an 8-pin SOIC package; accuracy and ordering-grade characteristics can differ by approximately 10%, with identical major bandwidth and supply-current ratings.

📋 Katalogda Olmayan Referans Alternatifi

TLV2472ID

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 SOIC-8 (D)
Same TLV247x CMOS RRIO family with 2.8 MHz bandwidth and 600 µA per channel, but it is a dual amplifier; the eighth-pin channel configuration differs from the single TLV2471ID.

📋 Katalogda Olmayan Referans Alternatifi

TLV2472AID

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 SOIC-8 (D)
Same 8-pin SOIC footprint and 2.8 MHz RRIO family, but the device is dual rather than single and may differ by approximately 20% in ordering-grade or accuracy-related characteristics.

📋 Katalogda Olmayan Referans Alternatifi

TLV2471ID Maksimum Değerlendirmeler & Elektriksel Özellikler

Amplifier Type Single operational amplifier
Number of Circuits 1 circuit
Maximum Supply Voltage 6 V
Gain-Bandwidth Product 2.8 MHz
Supply Current per Channel 600 µA
Input Type Rail-to-rail
Çıkış Türü Rail-to-rail
Technology CMOS
Paket 8-pin SOIC (D)
Pin Sayısı 8 pins
Montaj Türü Surface mount
Package Height 1.75 mm
İşletim Sıcaklığı Aralığı -40 °C to +125 °C

TLV2471ID 1.75 mm Pin Yapısı Kılavuzu

TLV2471ID (1.75 mm paket) için pin yapısı. Bu analog bileşen, giriş, çıkış ve güç besleme pinleri içerir. Ofset null, telafi ve etkinleştirme pin yapılandırmaları için üretici veri kitapçığını referans alın. Sinyal işleme ve güç amplifikasyon devreleri için mükemmel bir bileşendir.

1.75 mm paket pin çizelgesi için TLV2471ID

Ayrıntılı pin çıkış verisi mevcut değil: TLV2471ID.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

TLV2471ID için uygundur 6 uygulamas: Portable Sensor Signal Conditioning, Industrial Process Control, Low-Level Analog Buffering, Battery-Powered Measurement Equipment, Audio and Communication Interface, Data Acquisition Front End.

📱

Portable Sensor Signal Conditioning

The TLV2471ID suits portable sensor front ends because it combines rail-to-rail input and output operation with a supply current of 600 µA per channel. Place the amplifier between a bridge, resistive sensor, or low-level transducer and the system ADC to provide gain without requiring a mid-rail input. Its 2.8 MHz gain-bandwidth product supports moderate-frequency sensor dynamics while the 6 V maximum supply simplifies compatibility with low-voltage systems. Because it is not a dedicated micropower amplifier, verify that the amplifier’s continuous current and the ADC’s operating demand fit the available battery budget. Confirm common-mode range, input offset, bias current, and output-swing requirements in the manufacturer datasheet before production release.

🏭

Industrial Process Control

The TLV2471ID can condition low-level process signals in industrial control systems operating across a -40 °C to +125 °C temperature range. Its rail-to-rail inputs accept signals near the supply boundaries more effectively than a conventional non-RRIO amplifier, while the 2.8 MHz gain-bandwidth product provides useful margin for moderately fast feedback loops. Use it for pressure, temperature, or current-transducer interfaces where a single amplifier channel is sufficient. Validate the final input range, output swing, noise performance, and isolation strategy against the process environment. The SOIC package is suitable for conventional surface-mount assembly, but thermal and grounding practices remain important near power converters and motor-control circuitry.

🔧

Low-Level Analog Buffering

The TLV2471ID works as a low-level analog buffer when a sensor or divider cannot directly drive the next circuit. Rail-to-rail input and output behavior improves usable signal range, while the 600 µA per channel supply current supports conservative power budgets. The 2.8 MHz gain-bandwidth product is more than adequate for many instrumentation and control paths and allows unity-gain operation without requiring a high-speed discrete stage. Choose resistor values that preserve the required gain accuracy and check the datasheet’s capacitive-load and output-drive limits. When driving long traces or sampling nodes, place the amplifier close to the source and add only the capacitance required by the connected circuit.

🖥️

Battery-Powered Measurement Equipment

The TLV2471ID is appropriate for handheld meters and compact measurement instruments that need rail-to-rail signal access without a fast-switching converter. Its 600 µA per channel supply current is lower than many general-purpose precision amplifiers, while 2.8 MHz gain-bandwidth product provides more bandwidth than typical micropower devices. Use one stage to amplify a transducer or bridge output before an ADC, and power it from the same low-voltage rail as the converter when the output range permits. Calculate average consumption from the amplifier current, ADC activity, display load, and regulator quiescent current. Also confirm whether shutdown or power-gating is required at the system level, because that function must be verified in the manufacturer datasheet.

🌐

Audio and Communication Interface

The TLV2471ID can serve as a general-purpose gain stage or impedance buffer in modest audio and communication interfaces. Its rail-to-rail output supports useful swing at low supply voltages, while the 2.8 MHz gain-bandwidth product covers many voice-band and low-frequency control signals. The device’s 600 µA per channel current is helpful in portable equipment, although the high-drive architecture should not be interpreted as a full-power audio output stage. Confirm output-current capability, output-voltage range, noise, and stability into the actual load before use. Keep feedback traces short, return grounds cleanly beneath the analog section, and isolate switching-regulator and digital clocks from sensitive input nodes.

📊

Data Acquisition Front End

The TLV2471ID is useful as a driver or gain stage ahead of an ADC in compact data-acquisition systems. Rail-to-rail inputs accommodate signals that move close to the supply rails, and the 2.8 MHz gain-bandwidth product provides bandwidth for many moderate-rate sampling systems. Place the device close to the ADC input to minimize trace pickup, use short feedback paths, and select input and output networks that account for the ADC’s sampling behavior. The amplifier can also buffer a reference or drive a higher-impedance front end, provided its output capability meets the required load. Check the manufacturer datasheet for settling, output-drive, and capacitive-load limits, and verify that the 600 µA supply current is acceptable for the acquisition channel.

Önerilen Ürünler Özeti

TLV2471CD Texas Instruments Kullanıldığı Yer: Portable Sensor Signal Conditioning, Industrial Process Control, Battery-Powered Measurement Equipment, Data Acquisition Front End TLV2471AIDR Related accuracy-grade family candidate Kullanıldığı Yer: Portable Sensor Signal Conditioning, Low-Level Analog Buffering, Battery-Powered Measurement Equipment TLV2472ID Dual family option for multi-channel control Kullanıldığı Yer: Industrial Process Control, Low-Level Analog Buffering, Audio and Communication Interface, Data Acquisition Front End TLV2472AID Related dual-channel family candidate Kullanıldığı Yer: Audio and Communication Interface
What are the key specifications of TLV2471ID that engineers should know?
The TLV2471ID is a single 6 V, 2.8 MHz, rail-to-rail input/output CMOS operational amplifier with 600 µA supply current per channel. Texas Instruments specifies the device in an 8-pin SOIC package for surface-mount assembly. Its operating temperature range extends from -40 °C to +125 °C. These characteristics place it between precision micropower amplifiers and wider-band high-speed amplifiers, making it useful for portable sensor conditioning and general-purpose analog buffering.
Where can I download the TLV2471ID datasheet PDF?
The official TLV2471ID datasheet PDF is available from Texas Instruments at https://www.ti.com/lit/gpn/tlv2471. The manufacturer product page is https://www.ti.com/product/TLV2471 and the exact ordering page is https://www.ti.com/product/TLV2471/part-details/TLV2471ID. Use these documents to confirm the complete electrical characteristics, pin descriptions, ordering table, package drawings, and application guidance before finalizing a schematic.
Where can I find the TLV2471ID pinout?
The TLV2471ID pinout is shown in the pin-configuration section of the Texas Instruments TLV2471 family datasheet at https://www.ti.com/lit/gpn/tlv2471. The exact device is an 8-pin SOIC with 8 terminals, and the manufacturer confirms the SOIC (D) package on the TLV2471ID ordering page. Use the datasheet pin table and package drawing when assigning PCB nets rather than relying on a generic amplifier outline.
What is the operating voltage of TLV2471ID?
The TLV2471ID is specified for operation with a maximum 6 V supply. Its lower operating-supply limit, along with the recommended supply range for each rail configuration, must be confirmed in the manufacturer datasheet. Because the amplifier provides rail-to-rail input and output operation, usable signal range also depends on the actual supply voltage and the selected output load.
Why is the TLV2471ID suitable for battery-powered sensor circuits?
The TLV2471ID combines rail-to-rail input and output operation with a supply current of 600 µA per channel, making it appropriate for compact, battery-operated measurement circuits. Rail-to-rail inputs reduce the need to restrict sensor output to a narrower common-mode range, while the 2.8 MHz gain-bandwidth product supports moderate-bandwidth conditioning stages. Final battery-life calculations should include the system load, regulator efficiency, and duty cycle.
Can TLV2471ID replace TLV2471CD?
The TLV2471CD is a same-manufacturer functional alternative in the TLV2471 family, but its device-grade suffix indicates a different ordering grade rather than the exact TLV2471ID order code. TLV2471AIDR is likewise a related 8-SOIC member with potentially different electrical limits. Verify the manufacturer ordering table and compare offset, bandwidth, temperature, and qualification requirements before treating either part as a direct substitution.
What can replace TLV2471ID on the same 8-pin SOIC footprint?
TLV2471CD and TLV2471AIDR are the closest same-family candidates associated with the TLV2471ID in manufacturer and comparison information. Both are 8-pin SOIC devices, but related family members can differ in electrical characteristics and order grades. Confirm pin functions, supply limits, offset voltage, bandwidth, and temperature requirements in the datasheet. Use the Request a Quote form on this page when sourcing an exact replacement.
When should I choose TLV2471ID over a lower-power rail-to-rail amplifier?
Choose the TLV2471ID when a design needs more bandwidth than a micropower amplifier while remaining within a 600 µA-per-channel supply budget. The device provides 2.8 MHz gain-bandwidth product and rail-to-rail input/output behavior. Select a lower-power alternative instead when battery life dominates and the required signal bandwidth is below the available amplifier family’s 2.8 MHz gain-bandwidth product.
Is TLV2471ID suitable for industrial sensing and control?
The TLV2471ID is suitable for many industrial sensing and control tasks because it supports an operating temperature range of -40 °C to +125 °C, rail-to-rail input and output operation, and a 2.8 MHz gain-bandwidth product. Ensure the complete signal chain, power-supply range, output loading, electromagnetic environment, and any required industrial qualification satisfy the application specification.
What is the best Texas Instruments equivalent for TLV2471ID?
TLV2471CD is a related Texas Instruments TLV2471-family alternative identified as a functional equivalent, and TLV2471AIDR is another closely related 8-pin SOIC member. Neither should be treated as an automatic drop-in replacement because the order suffix and comparison page indicate that some electrical characteristics can differ. Compare the exact datasheet limits for the candidate and confirm that every PCB-connected function remains compatible.
TLV2471ID vs TLV2471AIDR: which is better for a portable sensor amplifier?
The TLV2471ID and TLV2471AIDR both belong to the 2.8 MHz rail-to-rail amplifier family and use an 8-pin SOIC format, but the comparison information indicates that some electrical characteristics differ. The correct choice depends on the required offset voltage, accuracy grade, supply-current behavior, temperature range, and qualification. Compare the exact rows in the manufacturer datasheet before selecting the lower-error or lower-power option for a portable sensor front end.
What is the lead time for TLV2471ID?
Current lead time and available production quantity should be requested through the Request a Quote form on this page because they can change with inventory, package demand, and order volume. The manufacturer lists TLV2471ID as an active orderable device in the 8-pin SOIC (D) package. Include your required quantity, target date, and packaging preference when requesting a quotation.
Is TLV2471ID in stock?
Current TLV2471ID inventory should be checked through the Request a Quote form on this page, where you can specify quantity, package form, and required delivery date. The manufacturer product page identifies the exact TLV2471ID order code in an 8-pin SOIC package. For production planning, request a dated availability statement rather than relying on transient distributor inventory.
Where to buy TLV2471ID online?
Use the Request a Quote form on this page to request TLV2471ID pricing, stock, and lead time for your required quantity. The exact manufacturer order code is TLV2471ID, and Texas Instruments identifies it as a single 6 V, 2.8 MHz RRIO operational amplifier in an 8-pin SOIC package. Include reel, tube, or other approved delivery requirements in the request.
What is the price of TLV2471ID?
The current TLV2471ID quotation is generated through the Request a Quote form on this page rather than published as a static price. Submit the required quantity, package form, ship-to region, and target date for an actionable response. This approach also allows the quote to account for quantity breaks, authentication requirements, and current component availability.

Mühendislik referans verileri: TLV2471ID — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the TLV2471ID for a low-voltage, single-channel signal-conditioning design that requires rail-to-rail input and output operation, 2.8 MHz gain-bandwidth product, and a 600 µA per-channel supply budget. Its -40 °C to +125 °C operating range also suits industrial and portable equipment. Consider TLV2471CD or TLV2471AIDR when an ordering or accuracy grade better matches the production requirements, but verify their exact electrical limits before substitution. Consider TLV2472ID or TLV2472AID when two related amplifier channels are needed in the same 8-pin SOIC footprint; their dual configuration changes the pin assignment and must not replace a single amplifier without a PCB and schematic review. For designs requiring substantially less than 600 µA per channel, compare the TLV2471 against a dedicated micropower amplifier family. In every case, validate input range, output swing, output drive, stability, temperature, and qualification against the manufacturer datasheet.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün TLV2471CD TLV2471AIDR TLV2472ID TLV2472AID
Package SOIC-8 (D) SOIC-8 (D) SOIC-8 (D) SOIC-8 (D) SOIC-8 (D)
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Amplifier Configuration Single Single Single Dual Dual
Number of Circuits 1 1 1 2 2
Maximum Supply Voltage 6 V 6 V 6 V 6 V 6 V
Gain-Bandwidth Product 2.8 MHz 2.8 MHz 2.8 MHz 2.8 MHz 2.8 MHz
Supply Current per Channel 600 µA 600 µA 600 µA 600 µA 600 µA
Input Common-Mode Range Rail-to-rail Rail-to-rail Rail-to-rail Rail-to-rail Rail-to-rail
Output Swing Rail-to-rail Rail-to-rail Rail-to-rail Rail-to-rail Rail-to-rail
Operating Temperature Range -40 °C to +125 °C -40 °C to +125 °C -40 °C to +125 °C -40 °C to +125 °C -40 °C to +125 °C

Ana Farklılayıcılar

  • Single-amplifier configuration reduces unused channel area (karşılaştırma:TLV2472ID)
  • Combines 2.8 MHz bandwidth with 600 µA per channel consumption (karşılaştırma:TLV2471CD)
  • Single-channel alternative matches the same 8-pin SOIC footprint (karşılaştırma:TLV2471AIDR)

Tasarım Notları

Place the TLV2471ID close to the sensor or ADC interface, with the input and feedback traces kept short and away from switching nodes. Route the return path beneath the amplifier and analog ground region to reduce injected noise. Decoupling capacitors should be located at the device supply pins and connected through short, low-inductance paths. Because the available information does not specify a recommended capacitor value, determine the final value from the manufacturer power-supply recommendations and the circuit’s operating bandwidth.

Do not assume that rail-to-rail input operation guarantees full rail-to-rail output swing under every load. Check the output-voltage limits, output-current capability, and capacitive-load stability in the manufacturer datasheet for the selected supply and load. Also verify the minimum operating supply voltage before designing a circuit around a 3.3 V or lower rail. These checks are especially important when the output drives an ADC, relay, cable, or capacitive sensor connection.

Use stable feedback-gain values and avoid excessively high source impedances because bias-current and offset effects can degrade signal accuracy. For driving an ADC, place the amplifier near the converter and account for charge injection through a small isolation resistor when the sampling network requires it. Check settling behavior at the required gain and signal frequency. Ground and power-return paths should be arranged so switching currents do not share sensitive analog return segments with the amplifier.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

No explicit compliance declarations are present in the manufacturer page or distributor snippets. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status using the manufacturer product documentation before procurement.

Veri doğrulanma tarihi: 2026-11-15 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

TLV2471ID datasheet TLV2471ID pinout TLV2471ID datasheet pdf TLV2471ID equivalent TLV2471ID replacement TLV2471ID cross reference TLV2471ID vs TLV2471CD TLV2471ID footprint TLV2471ID application circuit Texas Instruments TLV2471ID TLV2471ID price TLV2471ID stock

İlgili Bileşenler ve Terimler

Texas Instruments TLV2471ID TLV2471 TLV2471CD TLV2471AIDR TLV2472ID TLV2472AID Operational amplifier Amplifier IC Rail-to-rail input and output RRIO CMOS 2.8 MHz gain-bandwidth product 600 µA supply current 6 V maximum supply voltage SOIC-8 SOIC package Surface mount Sensor signal conditioning Data acquisition Industrial process control Portable instrumentation Low-noise analog signal path
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle