Texas Instruments

TLV2635IN - Quad 9MHz Rail-to-Rail Op Amp | Texas Instruments

MPN: TLV2635IN ✓ Aktif
730 uA/channel Vdss 16-PDIP Package
MOQ: 1 |

TLV2635IN Ringkasan

Texas Instruments TLV2635IN is a low-power, wide-bandwidth quad operational amplifier with rail-to-rail output, a 9 MHz gain-bandwidth product, 730 uA/ch supply current, and shutdown support. The device is supplied in a 16-pin through-hole plastic dual inline package with a 0.300-inch, 7.62 mm pin pitch.

An operational amplifier, or op amp, is an analog integrated circuit that amplifies the voltage difference between its inverting and non-inverting inputs. The TLV2635 belongs to the operational amplifier hierarchy and provides four independent amplifier channels in one package. Its rail-to-rail output allows the output voltage to approach the supply limits, making it useful for low-voltage instrumentation and signal-conditioning systems.

The principal features of the TLV2635IN include four amplifier circuits, a 9 MHz gain-bandwidth product, approximately 730 uA of supply current per channel, and operation from a single supply. The common-mode input range includes ground, while the output stage supports rail-to-rail operation. These characteristics support accurate signal conditioning where low supply current, useful bandwidth, and compact four-channel integration are more important than very high precision.

Each channel provides independent inverting and non-inverting inputs and an output. The family is designed for low-power, wide-bandwidth single-supply operation, and the TLV2635 version includes shutdown capability. The shutdown function can reduce supply consumption when the amplifier channels are not required, although exact shutdown timing and current should be confirmed in the manufacturer datasheet before final timing calculations.

Typical uses include industrial sensor interfaces, low-frequency instrumentation, audio and communications signal conditioning, portable measurement equipment, and general-purpose analog amplification. Four channels in one 16-pin DIP can reduce board area compared with four separate single amplifiers, provided the through-hole footprint and operating temperature requirements suit the target assembly process.

Designers should verify the supported supply-voltage range, input common-mode limits, output swing, output-current capability, and shutdown logic in the manufacturer datasheet. Decoupling capacitors should be placed close to the power pins, and unused amplifier inputs should be biased so they remain in a valid common-mode region. Prototype on the target board because the DIP package is suited to through-hole assembly rather than high-density surface-mount layouts.

This page combines the manufacturer-family operating characteristics, package details, sourcing guidance, application analysis, and candidate drop-in information. It also distinguishes exact electrical features from specifications that still require validation, helping engineers plan signal-chain design and PCB assembly before placing an order.

Alternatif penggantian untuk TLV2635IN — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

TLV2635IN-T6A

✅ Drop-In
📦 16-PDIP
Related 16-PDIP ordering code; suffix-specific qualification and environmental limits require confirmation, while the 9 MHz gain-bandwidth rating remains associated with the TLV2635 family.

📋 Alternatif referensi (tidak dalam katalog)

TLV2635IN-TV3

✅ Drop-In
📦 16-PDIP
Related 16-PDIP ordering code with different suffix-specific ordering or packing characteristics; the 9 MHz gain-bandwidth rating remains associated with the TLV2635 family.

📋 Alternatif referensi (tidak dalam katalog)

TLV2635IN Rating Maksimal & Karakteristik Listrik

Amplifier Circuit Count 4 circuits
Product Type Low-power, wide-bandwidth operational amplifier
Gain-Bandwidth Product 9 MHz
Supply Current Per Channel 730 uA/channel
Supply Configuration Single supply
Output Swing Rail-to-rail
Common-Mode Input Range Includes ground
Shutdown Support Yes
Package Type 16-PDIP
Tipe Mounting Through hole
Pin Pitch 0.300 in (7.62 mm)

Konfigurasi Pin TLV2635IN

DIP-16 Package Pinout Diagram DIP-16 16-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 DIP-16
Pin produk 1 OUT1 — Channel 1 output
Pin produk 2 -IN1 — Channel 1 inverting input
Pin produk 3 +IN1 — Channel 1 non-inverting input
Pin produk 4 V+ — Positive supply connection
Pin produk 5 +IN2 — Channel 2 non-inverting input
Pin produk 6 -IN2 — Channel 2 inverting input
Pin produk 7 OUT2 — Channel 2 output
Pin produk 8 OUT3 — Channel 3 output
Pin produk 9 -IN3 — Channel 3 inverting input
Pin produk 10 +IN3 — Channel 3 non-inverting input
Pin produk 11 V- — Negative supply connection
Pin produk 12 +IN4 — Channel 4 non-inverting input
Pin produk 13 -IN4 — Channel 4 inverting input
Pin produk 14 OUT4 — Channel 4 output
Pin produk 15 SHDN — Shutdown control input
Pin produk 16 NC — Not connected

Aplikasi Umum

TLV2635IN cocok untuk 6 aplikasis: Industrial Sensor Signal Conditioning, Portable Measurement Equipment, Audio Preamplifier Conditioning, Communications Interface Buffering, Test and Measurement Front Ends, Low-Voltage Control Loops.

🏭

Industrial Sensor Signal Conditioning

The TLV2635IN is appropriate for buffering and conditioning signals from industrial sensors when four channels and low per-channel supply current simplify the analog front end. Its 9 MHz gain-bandwidth product provides useful closed-loop bandwidth for many sensor signals, while rail-to-rail output increases the available output range in low-voltage systems. The common-mode input range includes ground, which supports sensors centered near 0 V. Use the four amplifier channels for differential inputs, gain stages, or active filtering, and verify the actual sensor output range against the device input limits before production use.

🧩

Portable Measurement Equipment

The TLV2635IN suits portable or low-power measurement equipment where four analog channels must fit into a compact through-hole board. Approximately 730 uA of supply current per channel helps control consumption, while the 9 MHz gain-bandwidth product is more than adequate for many low-frequency measurement and control paths. The rail-to-rail output can improve utilization of a limited supply range. Shutdown support allows the amplifier to be disabled when measurements are not active, subject to the exact logic and timing requirements in the manufacturer datasheet.

🎧

Audio Preamplifier Conditioning

The TLV2635IN can provide gain and impedance conditioning in general-purpose audio preamplifier paths that operate from a single supply. Its 9 MHz gain-bandwidth product permits useful bandwidth at moderate closed-loop gains, and the rail-to-rail output helps preserve signal swing near the supply limits. Four channels can process multiple low-level audio lines, although low-noise performance and maximum output-current capability should be checked against the signal source and load. Avoid using the device for high-current headphone drive without confirming its output-stage limits.

🌐

Communications Interface Buffering

The TLV2635IN is applicable to communications equipment requiring four single-supply buffer or gain stages close to a connector or sensor interface. Rail-to-rail output supports flexible signal swing, and the approximately 730 uA per-channel supply current suits compact interface electronics. The 9 MHz gain-bandwidth product can handle moderate-bandwidth conditioning, but actual channel bandwidth depends on the selected closed-loop gain and load. Confirm input capacitance, output drive, and supply limits in the manufacturer datasheet before using it with high-speed lines.

🖥️

Test and Measurement Front Ends

The TLV2635IN can be used in general-purpose test equipment for four low-level signal buffers, active filters, or channel amplifiers. Its 9 MHz gain-bandwidth product supports wider closed-loop bandwidth than precision-only amplifiers, and the single-supply architecture simplifies system power design. The common-mode range including ground makes it suitable for bipolar sensor signals around ground, while rail-to-rail output provides useful headroom. For metrology applications, verify input offset, drift, and noise limits before choosing it over a precision amplifier.

⚡

Low-Voltage Control Loops

The TLV2635IN can implement low-voltage control, feedback, and error-amplifier functions in industrial or embedded systems. Its four channels allow several control loops to share one package, and the 9 MHz gain-bandwidth product supports faster loop response than a low-bandwidth general-purpose amplifier. Rail-to-rail output helps drive signals within a narrow supply range, while shutdown may save power during inactive operating states. Validate stability, source impedance, output loading, and supply range against the intended control topology before deployment.

Ringkasan Produk Direkomendasikan

TLV2635IN-T6A Related low-power quad operational amplifier Digunakan di dalam: Industrial Sensor Signal Conditioning, Portable Measurement Equipment, Audio Preamplifier Conditioning, Communications Interface Buffering, Test and Measurement Front Ends, Low-Voltage Control Loops TLV2635IN-TV3 Related TLV2635-family ordering code Digunakan di dalam: Industrial Sensor Signal Conditioning, Portable Measurement Equipment, Audio Preamplifier Conditioning, Communications Interface Buffering, Test and Measurement Front Ends, Low-Voltage Control Loops
What is the operating voltage range of TLV2635IN?
The TLV2635IN is a single-supply operational amplifier, but its exact operating-voltage range must be confirmed in the Texas Instruments manufacturer datasheet before design release. The device is identified as a low-power, wide-bandwidth member of the TLV2635 family, with a 9 MHz gain-bandwidth product and approximately 730 uA of supply current per channel. The 16-pin DIP package also requires a compatible through-hole PCB footprint.
What are the key specifications of TLV2635IN that engineers should know?
The TLV2635IN integrates four operational-amplifier channels in a 16-pin DIP package. According to the Texas Instruments manufacturer datasheet family information, it provides a 9 MHz gain-bandwidth product, approximately 730 uA per channel of supply current, rail-to-rail output operation, a common-mode input range that includes ground, and shutdown support. It is intended for low-power, wide-bandwidth, single-supply signal-conditioning applications.
Where can I download the TLV2635IN datasheet PDF?
The TLV2635IN datasheet PDF can be opened through the official-document link on this page, and a 24-page manufacturer datasheet is also indexed at the listed document location. Use the pin-description table and electrical-characteristics tables to confirm supply limits, common-mode range, output swing, shutdown behavior, and package dimensions. The indexed PDF identifies the TLV2635 family as low-power, wide-bandwidth single-supply operational amplifiers with and without shutdown.
Where can I find the TLV2635IN pinout?
The TLV2635IN uses a 16-pin plastic DIP layout with 0.300-inch, 7.62 mm pin spacing. Use the manufacturer pin-description table to assign every schematic signal and to confirm the location of the shutdown control. This page also provides the numbered 16-pin outline, but production artwork should be checked against the packaged drawing in the Texas Instruments datasheet before fabrication.
Is TLV2635IN suitable for low-voltage signal conditioning?
The TLV2635IN is suitable for low-voltage signal conditioning when its supply and common-mode limits fit the signal range. Its rail-to-rail output gives useful output range flexibility, while the 9 MHz gain-bandwidth product supports higher-bandwidth closed-loop designs than a very-low-frequency precision amplifier. The approximately 730 uA per-channel supply current also favors compact, low-power instrumentation.
Does TLV2635IN have rail-to-rail output and shutdown?
Yes, the TLV2635IN provides rail-to-rail output and includes shutdown capability. The Texas Instruments manufacturer datasheet family information identifies rail-to-rail output and describes the TLV2635 family as single-supply operational amplifiers with and without shutdown. Shutdown can reduce consumption when amplification is not needed, but the required logic levels and shutdown current should be taken directly from the device datasheet.
What is the gain-bandwidth product and supply current of TLV2635IN?
The TLV2635IN has a 9 MHz gain-bandwidth product and approximately 730 uA of supply current per channel. According to the Texas Instruments manufacturer datasheet family information, these values place it in the low-power, wide-bandwidth amplifier class. The bandwidth supports general-purpose analog signal processing, while the low per-channel current is beneficial in multichannel portable instrumentation.
TLV2635IN vs TLV2635IN-T6A: which version should I choose?
Choose the TLV2635IN for a standard general-purpose 16-PDIP design and consider TLV2635IN-T6A only after checking its grade, environmental qualification, and orderable suffix against the manufacturer documentation. The TLV2635IN-T6A is a related listing from the cross-reference record, but suffix-specific temperature, qualification, and marking requirements must be verified. Both candidates must be checked against the original procurement specification.
What is the difference between TLV2635IN and TLV2635IN-TV3?
The TLV2635IN-TV3 is a suffix-specific related listing, while TLV2635IN is the base 16-PDIP ordering code shown by the manufacturer and distributor records. The available cross-reference record does not establish all lifecycle, grade, and packing differences, so engineers should compare the manufacturer ordering table before substitution. Do not treat the suffixes as automatically interchangeable without confirming marking, temperature grade, and packing requirements.
When should I choose TLV2635IN over a lower-bandwidth quad op amp?
Choose the TLV2635IN when the signal path benefits from its 9 MHz gain-bandwidth product but does not require the noise, offset, or supply performance of a precision amplifier. It is also appropriate when four channels, single-supply operation, rail-to-rail output, and roughly 730 uA per channel are useful. For very low-frequency precision measurements, select a device with tighter input-offset and drift specifications.
Is TLV2635IN the same as TLV2635IN-T6A?
No, TLV2635IN and TLV2635IN-T6A are distinct ordering codes even though the cross-reference record associates them as similar parts. The record does not provide enough suffix-level detail to prove identical environmental grade, qualification, marking, or packing. Verify both codes against the Texas Instruments ordering information and your production requirements before treating either as the drop-in choice for the other.
What can replace TLV2635IN?
The directly documented candidate is the related TLV2635IN-T6A ordering code, but it should replace TLV2635IN only after confirming the same 16-PDIP footprint, electrical limits, temperature grade, qualification, and lifecycle requirements. A cross-brand replacement cannot be recommended from a generic cross-reference page alone because no verified pin-compatible candidate was identified. The manufacturer pin table and electrical-characteristics tables are the controlling documents for a substitution.
Where can I buy TLV2635IN and what is its price?
Use the Request a Quote form on this page to request current TLV2635IN availability, unit pricing, minimum order quantity, and lead time. Because commercial terms can change by quantity and market condition, request a firm quote for the exact 16-PDIP ordering code. The form is also the appropriate route for checking obsolete or allocation-sensitive supply without relying on a static market listing.
What is the lead time for TLV2635IN?
The current production lead time for TLV2635IN should be confirmed through the Request a Quote form on this page. Enter the exact MPN, required quantity, and shipment destination so the returned commercial response reflects the current market position. Because lifecycle and inventory status can change, a confirmed quotation is more useful than a generic lead-time estimate.
Is TLV2635IN in stock?
Current TLV2635IN stock status should be checked through the Request a Quote form on this page because availability can change with purchasing volume and supply conditions. Provide the required quantity and packaging preference with the request. The manufacturer family and package details are established, but a current quotation is the appropriate method for confirming deliverable inventory.

Data referensi engineering untuk TLV2635IN — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the TLV2635IN when a design needs four general-purpose amplifier channels, a 9 MHz gain-bandwidth product, approximately 730 uA per channel, and single-supply operation in a 16-PDIP package. Rail-to-rail output and a common-mode range including ground make it particularly useful for low-level sensor conditioning. Consider TLV2635IN-T6A when its suffix-specific qualification or environmental characteristics match the production requirement, and verify the ordering table before substitution. TLV2635IN-TV3 is another related ordering code, but its packing and procurement characteristics should be checked against the assembly plan. Use a precision amplifier instead when low offset, low drift, or exceptionally low noise is more important than bandwidth and integration. The 16-pin DIP footprint also makes this device more appropriate for through-hole or manually assembled prototypes than compact surface-mount production boards.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini TLV2635IN-T6A TLV2635IN-TV3
Brand Texas Instruments Texas Instruments Texas Instruments
Package 16-PDIP 16-PDIP 16-PDIP
Amplifier Channels 4 circuits 4 circuits 4 circuits
Gain-Bandwidth Product 9 MHz 9 MHz 9 MHz
Supply Configuration Single supply Single supply Single supply
Output Swing Rail-to-rail Rail-to-rail Rail-to-rail
Shutdown Support Yes Yes Yes
Mounting Type Through hole Through hole Through hole

Diferensiator Kunci

  • Combines four channels with a 9 MHz gain-bandwidth product (vsTLV2635IN-T6A)
  • Provides shutdown support for reducing inactive-state consumption (vsTLV2635IN-TV3)
  • Combines rail-to-rail output with a common-mode range that includes ground (vsTLV2635IN-T6A)

Catatan Desain

Reserve a 16-pin through-hole footprint with 0.300-inch, 7.62 mm row spacing. Place the positive supply decoupling capacitor close to the V+ pin and connect the ground reference directly to the V- pin. Because this is a multi-amplifier package, route each channel to minimize shared-impedance coupling and keep sensitive inputs away from supply and shutdown traces.

Do not allow either input of an unused channel to float. Tie the non-inverting input to a defined bias point and configure the inverting input for stable operation. Also verify the shutdown-pin logic against the manufacturer datasheet, since leaving the control at an undefined voltage can place the amplifier in an unintended operating state and increase supply consumption.

Treat the 9 MHz gain-bandwidth product as an amplifier-level parameter rather than guaranteed closed-loop bandwidth. Actual bandwidth depends on gain, feedback topology, source impedance, load, and PCB parasitics. Add small feedback resistors where required to control high-frequency peaking, and use short ground returns to reduce susceptibility to common-mode noise on low-level sensor inputs.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was available for the exact ordering code. Confirm the applicable declarations using the exact manufacturer orderable code and its current documentation.

Pencarian Terkait

TLV2635IN datasheet TLV2635IN pinout TLV2635IN datasheet pdf Texas Instruments TLV2635IN TLV2635IN equivalent TLV2635IN replacement TLV2635IN drop-in replacement TLV2635IN vs TLV2635IN-T6A TLV2635IN 16-DIP footprint TLV2635IN 9MHz op amp TLV2635IN application circuit TLV2635IN price

Komponen dan Istilah Terkait

Texas Instruments TLV2635IN TLV2635IN-T6A TLV2635IN-TV3 operational amplifier quad operational amplifier analog amplifier integrated circuit signal conditioning rail-to-rail output single-supply amplifier shutdown control gain-bandwidth product supply current per channel common-mode input range 16-PDIP DIP package family through-hole package surface-mount alternative industrial instrumentation portable measurement equipment audio preamplifier communications interface low-voltage control loop RoHS REACH
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ