TLV2764IN - Quad 500 kHz RRIO Op Amp | Texas Instruments
MPN: TLV2764IN ✓ AktifTLV2764IN Ringkasan
An operational amplifier is a high-gain analog signal-conditioning IC used to amplify voltage differences, buffer sensors, drive analog-to-digital converter inputs, and implement filters or feedback-control loops. The TLV2764IN belongs to the operational-amplifier hierarchy, where rail-to-rail input and output operation extends signal range and output swing toward the supply rails, making the device useful in compact battery-powered and low-voltage embedded systems.
The four amplifiers provide rail-to-rail inputs and outputs, 500 kHz bandwidth, and operation from 1.8 V to 3.6 V. These characteristics suit low-energy sensor interfaces, portable measurement equipment, audio signal conditioning, and general-purpose analog control. The 20 µA per-amplifier operating current helps reduce the power burden in systems where four active analog channels are required, while the small bandwidth avoids introducing unnecessary high-frequency gain in precision measurement paths.
Each channel includes an input common-mode range that extends to both supply rails, and the output stage is designed for rail-to-rail swing. These features simplify signal conditioning when the source can approach either supply rail. The quad organization also reduces the number of packages and board connections needed for systems implementing four independent amplifier functions or several instrumentation stages.
Typical uses include low-voltage sensor front ends, battery-powered monitoring, analog-to-digital converter signal conditioning, active filters, and general-purpose buffering. The 14-PDIP package is suitable for through-hole prototypes, educational platforms, and industrial or instrumentation assemblies where the larger package simplifies hand insertion and inspection.
Designers should verify input and output common-mode limits, capacitive-load stability, output-current capability, and noise performance against the application operating conditions. Place bypass capacitors close to the supply pins and maintain a clean return path to minimize supply noise and ground-offset errors. This page consolidates the key electrical specifications, package information, functional alternatives, and design considerations needed for initial component selection.
For a new design, compare the complete TLV2764 family and package options in the manufacturer datasheet, especially when shutdown control, temperature grade, or package footprint differs from the TLV2764IN requirements. Validate the final amplifier configuration with the intended source impedance, load, supply tolerance, and environmental conditions before production release.
Alternatif penggantian untuk TLV2764IN — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian TLV2764IN (sama faktor bentuk dan footprint) — berbeda di dalam Amplifier Type, Gain-Bandwidth Product, Package, Supply Current.
TLV2764CN
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
TLV2764IN Rating Maksimal & Karakteristik Listrik
| Amplifier Type | Quad general-purpose operational amplifier |
| Number of Channels | 4 channels |
| Rail-to-Rail Input | Yes |
| Rail-to-Rail Output | Yes |
| Minimum Supply Voltage | 1.8 V |
| Maximum Recommended Supply Voltage | 3.6 V |
| Gain-Bandwidth Product | 500 kHz |
| Arus Pemuat | 20 µA per amplifier |
| Rentang Suhu Kerja | -40 °C to +85 °C |
| Paket | 14-PDIP, 14 pins |
| Tipe Mounting | Through-hole |
| Product Category | Instrumentation, operational amplifier, buffer amplifier |
| Power-Supply Type | Single supply |
Konfigurasi Pin TLV2764IN
| Pin produk 1 | OUT1 — Amplifier 1 output |
| Pin produk 2 | IN1- — Amplifier 1 inverting input |
| Pin produk 3 | IN1+ — Amplifier 1 noninverting input |
| Pin produk 4 | V+ — Positive supply connection |
| Pin produk 5 | IN2+ — Amplifier 2 noninverting input |
| Pin produk 6 | IN2- — Amplifier 2 inverting input |
| Pin produk 7 | OUT2 — Amplifier 2 output |
| Pin produk 8 | OUT3 — Amplifier 3 output |
| Pin produk 9 | IN3- — Amplifier 3 inverting input |
| Pin produk 10 | IN3+ — Amplifier 3 noninverting input |
| Pin produk 11 | V- — Negative supply or ground connection |
| Pin produk 12 | IN4+ — Amplifier 4 noninverting input |
| Pin produk 13 | IN4- — Amplifier 4 inverting input |
| Pin produk 14 | OUT4 — Amplifier 4 output |
Aplikasi Umum
TLV2764IN cocok untuk 6 aplikasis: Battery-Powered Sensor Interface, Low-Voltage ADC Signal Conditioning, Portable Instrumentation, Active Audio Filtering, Process-Control Signal Conditioning, Battery Monitor and Threshold Circuit.
Battery-Powered Sensor Interface
The TLV2764IN is well suited to low-energy sensing systems because each amplifier operates from 1.8 V to 3.6 V while drawing 20 µA. Rail-to-rail input capability allows a sensor signal to operate close to either supply rail, reducing the need for artificial signal biasing. Four channels can provide conditioning for multiple resistive, capacitive, or current-based sensors without requiring separate packages. The 500 kHz bandwidth is adequate for low-to-moderate-frequency measurements rather than high-speed waveform capture.
Direkomendasikan
Low-Voltage ADC Signal Conditioning
The TLV2764IN can buffer or amplify sensor outputs before conversion by an ADC operating from a similarly low supply. Rail-to-rail inputs accept a broad input range, while rail-to-rail outputs maximize usable voltage swing without a fixed 0.5 V or 1 V output restriction. Its 500 kHz bandwidth supports moderate-speed acquisition stages, and 20 µA per amplifier helps preserve battery life. Verify ADC sampling requirements and add an isolation resistor if capacitive-input loading requires it.
Direkomendasikan
Portable Instrumentation
Portable measurement instruments benefit from the TLV2764IN's combination of four amplifier channels, 1.8 V minimum supply, and low 20 µA operating current. The device can implement input buffers, differential stages, gain blocks, and active filtering within one through-hole package. Its rail-to-rail input and output characteristics are useful when signal levels occupy much of the available supply range. For handheld equipment, confirm noise, offset, and drift requirements against the complete manufacturer electrical-characteristics table.
Direkomendasikan
Active Audio Filtering
The TLV2764IN can implement low-frequency active filters and audio-path buffers when operating from a 1.8 V to 3.6 V supply. The 500 kHz gain-bandwidth product provides margin for low-frequency filter and gain stages, while four independent channels enable cascaded filtering or multichannel signal conditioning. Rail-to-rail output swing improves utilization of the available signal range in portable audio equipment. Stability and distortion should be checked with the actual source impedance, load, and filter topology.
Direkomendasikan
Process-Control Signal Conditioning
The TLV2764IN is appropriate for low-voltage process-control modules that require several conditioned sensor channels near the controller. The -40 °C to +85 °C operating range supports industrial environments, while four RRIO amplifiers can handle current loops, transducer outputs, and feedback signals in one package. The 500 kHz bandwidth is suitable for slower control signals, and 20 µA per channel limits power use in distributed monitoring equipment. Isolation and surge-protection requirements depend on the external signal path.
Direkomendasikan
Battery Monitor and Threshold Circuit
The TLV2764IN can provide comparison, threshold detection, and buffered monitoring functions for a low-voltage battery system. Operation down to 1.8 V preserves usable measurement range as a cell approaches its discharge endpoint, and rail-to-rail inputs simplify sensing around the supply rails. Four channels allow a design to monitor more than one battery node or combine filtering with threshold logic. Component tolerances, input offset, and temperature drift should be included in the error budget for precision monitoring.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk TLV2764IN — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | TLV2764CN |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Package | 14-PDIP, 14 pins | 14-PDIP, 14 pins - same |
| Number of Amplifiers | 4 channels | 4 channels |
| Supply Voltage Range | 1.8 V to 3.6 V | 1.8 V to 3.6 V |
| Gain-Bandwidth Product | 500 kHz | 500 kHz |
| Supply Current | 20 µA per amplifier | 20 µA per amplifier |
| Rail-to-Rail Input and Output | Yes | Yes |
| Operating Temperature Range | -40 °C to +85 °C | Commercial-temperature grade; exact limit not stated in the cited data |
| Mounting Type | Through-hole | Through-hole |
Diferensiator Kunci
- Industrial-temperature coverage (vsTLV2764CN)
- Four-channel integration (vsTLV2764CN)
- Low-voltage signal conditioning (vsTLV2764CN)
Catatan Desain
Decouple the supply pins with a local bypass capacitor and route it through a short ground path to reduce supply-borne noise. Keep analog signal traces away from the supply entry and high-current return paths. Because the amplifier operates down to 1.8 V, verify that every external signal remains inside the input common-mode range and that the supply rail has adequate startup and transient margin.
Place the 14-PDIP in the orientation shown by the manufacturer pin drawing, with pin 1 clearly marked at the board edge. Route each amplifier's feedback components close to their associated pins to minimize parasitic resistance and capacitance. Keep the four channels physically separated when they carry unrelated signals, and use an uninterrupted ground region beneath or near the device where the board design permits.
Do not treat rail-to-rail operation as unrestricted input or output range; input common-mode limits, output swing, and supply voltage must be checked for each configuration. Also account for amplifier input offset and noise when resolving low-level signals. Before substituting TLV2764CN for TLV2764IN, confirm that the commercial temperature grade covers the complete operating environment.
Informasi Konformitas
The cited product and datasheet pages do not state the requested environmental and material-compliance classifications. AEC-Q100 is not applicable because this ordering option is identified as a general-purpose industrial-temperature amplifier rather than an automotive-qualified variant.