Texas Instruments

TLV2764IN - Quad 500 kHz RRIO Op Amp | Texas Instruments

부품 번호: TLV2764IN ✓ 활성
1.8 V Vdss 20 µA per amplifier Id 14-PDIP, 14 pins Package
MOQ: 1 |

TLV2764IN 개요

Texas Instruments TLV2764IN is a quad, rail-to-rail input and output operational amplifier designed for low-voltage, low-power signal conditioning. Each amplifier supports supply voltages down to 1.8 V, operates from a maximum recommended supply of 3.6 V, and provides 500 kHz gain-bandwidth product while drawing only 20 µA per amplifier. The device is packaged in a 14-pin plastic dual in-line package (14-PDIP).

An operational amplifier is a high-gain analog signal-conditioning IC used to amplify voltage differences, buffer sensors, drive analog-to-digital converter inputs, and implement filters or feedback-control loops. The TLV2764IN belongs to the operational-amplifier hierarchy, where rail-to-rail input and output operation extends signal range and output swing toward the supply rails, making the device useful in compact battery-powered and low-voltage embedded systems.

The four amplifiers provide rail-to-rail inputs and outputs, 500 kHz bandwidth, and operation from 1.8 V to 3.6 V. These characteristics suit low-energy sensor interfaces, portable measurement equipment, audio signal conditioning, and general-purpose analog control. The 20 µA per-amplifier operating current helps reduce the power burden in systems where four active analog channels are required, while the small bandwidth avoids introducing unnecessary high-frequency gain in precision measurement paths.

Each channel includes an input common-mode range that extends to both supply rails, and the output stage is designed for rail-to-rail swing. These features simplify signal conditioning when the source can approach either supply rail. The quad organization also reduces the number of packages and board connections needed for systems implementing four independent amplifier functions or several instrumentation stages.

Typical uses include low-voltage sensor front ends, battery-powered monitoring, analog-to-digital converter signal conditioning, active filters, and general-purpose buffering. The 14-PDIP package is suitable for through-hole prototypes, educational platforms, and industrial or instrumentation assemblies where the larger package simplifies hand insertion and inspection.

Designers should verify input and output common-mode limits, capacitive-load stability, output-current capability, and noise performance against the application operating conditions. Place bypass capacitors close to the supply pins and maintain a clean return path to minimize supply noise and ground-offset errors. This page consolidates the key electrical specifications, package information, functional alternatives, and design considerations needed for initial component selection.

For a new design, compare the complete TLV2764 family and package options in the manufacturer datasheet, especially when shutdown control, temperature grade, or package footprint differs from the TLV2764IN requirements. Validate the final amplifier configuration with the intended source impedance, load, supply tolerance, and environmental conditions before production release.

드롭인 대체품: TLV2764IN — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: TLV2764IN (동일 폼 팩터 및 풋프린트) — 차이점: Amplifier Type, Gain-Bandwidth Product, Package, Supply Current.

Texas Instruments
Amplifier Type: Dual operational amplifier
Gain-Bandwidth Product: 500 kHz typical
Package: 14-pin PDIP
비교 대상: TLV2764IN →

TLV2764CN

✅ 드롭인 ⚠️ 사양 미검증
📦 14-PDIP
Commercial-temperature grade replaces the -40 °C to +85 °C industrial grade; supply range, RRIO architecture, 500 kHz bandwidth, and 20 µA per-amplifier current remain the same

📋 참조 대체품 (카탈로그에 없음)

TLV2764IN 최대 정격 & 전기적 특성

Amplifier Type Quad general-purpose operational amplifier
Number of Channels 4 channels
Rail-to-Rail Input Yes
Rail-to-Rail Output Yes
Minimum Supply Voltage 1.8 V
Maximum Recommended Supply Voltage 3.6 V
Gain-Bandwidth Product 500 kHz
공급 전류 20 µA per amplifier
동작 온도 범위 -40 °C to +85 °C
패키지 14-PDIP, 14 pins
실장 유형 Through-hole
Product Category Instrumentation, operational amplifier, buffer amplifier
Power-Supply Type Single supply

TLV2764IN 핀 구성

DIP-14 Package Pinout Diagram DIP-14 14-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 DIP-14
핀 1 OUT1 — Amplifier 1 output
핀 2 IN1- — Amplifier 1 inverting input
핀 3 IN1+ — Amplifier 1 noninverting input
핀 4 V+ — Positive supply connection
핀 5 IN2+ — Amplifier 2 noninverting input
핀 6 IN2- — Amplifier 2 inverting input
핀 7 OUT2 — Amplifier 2 output
핀 8 OUT3 — Amplifier 3 output
핀 9 IN3- — Amplifier 3 inverting input
핀 10 IN3+ — Amplifier 3 noninverting input
핀 11 V- — Negative supply or ground connection
핀 12 IN4+ — Amplifier 4 noninverting input
핀 13 IN4- — Amplifier 4 inverting input
핀 14 OUT4 — Amplifier 4 output

일반적인 애플리케이션

TLV2764IN 적합 용도: 6 애플리케이션s: Battery-Powered Sensor Interface, Low-Voltage ADC Signal Conditioning, Portable Instrumentation, Active Audio Filtering, Process-Control Signal Conditioning, Battery Monitor and Threshold Circuit.

🧩

Battery-Powered Sensor Interface

The TLV2764IN is well suited to low-energy sensing systems because each amplifier operates from 1.8 V to 3.6 V while drawing 20 µA. Rail-to-rail input capability allows a sensor signal to operate close to either supply rail, reducing the need for artificial signal biasing. Four channels can provide conditioning for multiple resistive, capacitive, or current-based sensors without requiring separate packages. The 500 kHz bandwidth is adequate for low-to-moderate-frequency measurements rather than high-speed waveform capture.

📟

Low-Voltage ADC Signal Conditioning

The TLV2764IN can buffer or amplify sensor outputs before conversion by an ADC operating from a similarly low supply. Rail-to-rail inputs accept a broad input range, while rail-to-rail outputs maximize usable voltage swing without a fixed 0.5 V or 1 V output restriction. Its 500 kHz bandwidth supports moderate-speed acquisition stages, and 20 µA per amplifier helps preserve battery life. Verify ADC sampling requirements and add an isolation resistor if capacitive-input loading requires it.

🖥️

Portable Instrumentation

Portable measurement instruments benefit from the TLV2764IN's combination of four amplifier channels, 1.8 V minimum supply, and low 20 µA operating current. The device can implement input buffers, differential stages, gain blocks, and active filtering within one through-hole package. Its rail-to-rail input and output characteristics are useful when signal levels occupy much of the available supply range. For handheld equipment, confirm noise, offset, and drift requirements against the complete manufacturer electrical-characteristics table.

🎧

Active Audio Filtering

The TLV2764IN can implement low-frequency active filters and audio-path buffers when operating from a 1.8 V to 3.6 V supply. The 500 kHz gain-bandwidth product provides margin for low-frequency filter and gain stages, while four independent channels enable cascaded filtering or multichannel signal conditioning. Rail-to-rail output swing improves utilization of the available signal range in portable audio equipment. Stability and distortion should be checked with the actual source impedance, load, and filter topology.

🏭

Process-Control Signal Conditioning

The TLV2764IN is appropriate for low-voltage process-control modules that require several conditioned sensor channels near the controller. The -40 °C to +85 °C operating range supports industrial environments, while four RRIO amplifiers can handle current loops, transducer outputs, and feedback signals in one package. The 500 kHz bandwidth is suitable for slower control signals, and 20 µA per channel limits power use in distributed monitoring equipment. Isolation and surge-protection requirements depend on the external signal path.

🔋

Battery Monitor and Threshold Circuit

The TLV2764IN can provide comparison, threshold detection, and buffered monitoring functions for a low-voltage battery system. Operation down to 1.8 V preserves usable measurement range as a cell approaches its discharge endpoint, and rail-to-rail inputs simplify sensing around the supply rails. Four channels allow a design to monitor more than one battery node or combine filtering with threshold logic. Component tolerances, input offset, and temperature drift should be included in the error budget for precision monitoring.

추천 제품 요약

TLV2764CN Same-family quad amplifier for commercial-temperature installations 사용처: Battery-Powered Sensor Interface, Low-Voltage ADC Signal Conditioning, Portable Instrumentation, Active Audio Filtering, Process-Control Signal Conditioning, Battery Monitor and Threshold Circuit
What are the key specifications of TLV2764IN that engineers should know?
The TLV2764IN is a quad operational amplifier with 500 kHz gain-bandwidth product, 20 µA operating current per amplifier, and operation from 1.8 V to 3.6 V. It also provides rail-to-rail input and output behavior in a 14-PDIP package. According to the Texas Instruments TLV2764 product page and datasheet, these characteristics make it suitable for low-voltage, low-power signal-conditioning systems requiring four amplifier channels.
What is the operating voltage range of TLV2764IN?
The TLV2764IN operates from 1.8 V to a maximum recommended supply voltage of 3.6 V. According to the Texas Instruments TLV2764 datasheet, the family is characterized at 1.8 V and 2.4 V, allowing operation from a single low-voltage supply. The 1.8 V lower limit is particularly useful for designs powered by a single alkaline cell or a low-voltage energy-harvesting rail.
What is the bandwidth of TLV2764IN?
The TLV2764IN provides a gain-bandwidth product of 500 kHz per amplifier. According to the Texas Instruments TLV2764 product page, this bandwidth supports general-purpose low-voltage signal conditioning without the higher power and frequency response associated with conventional high-speed amplifiers. Its 20 µA operating current per channel further reinforces its suitability for portable and low-energy instrumentation.
Where can I download the TLV2764IN datasheet PDF?
The official TLV2764IN datasheet is available through the Texas Instruments literature link at https://www.ti.com/lit/gpn/tlv2764. The document covers the TLV2764 family, including the TLV2764IN 14-PDIP ordering option. Use the pin-description table and recommended operating conditions when assigning PCB functions, and the electrical characteristics table for design limits.
Where can I find the TLV2764IN pinout?
The TLV2764IN pinout is defined by the manufacturer datasheet at https://www.ti.com/lit/gpn/tlv2764. The 14-PDIP package contains four complete operational amplifiers, supply pins, and the associated input, output, and power connections. Use the package drawing and pin-description table when assigning nets, especially the common positive supply and negative or ground supply.
Is TLV2764IN suitable for battery-powered sensor interfaces?
Yes, the TLV2764IN is suitable for battery-powered sensor interfaces because it operates down to 1.8 V and consumes 20 µA per amplifier. Its rail-to-rail inputs can accept signals near the supply rails, while rail-to-rail outputs increase usable signal range. According to the Texas Instruments TLV2764 datasheet, the family is characterized for low-voltage operation, making it appropriate for portable sensing.
Can TLV2764IN drive an ADC input?
Yes, the TLV2764IN can condition a sensor signal and drive an ADC input when operated within its output-voltage and capacitive-load limits. Rail-to-rail output behavior provides useful headroom at low supply voltages, and the 500 kHz bandwidth is suitable for many moderate-rate conversion systems. Check the ADC acquisition-time and capacitor requirements, and place an isolation resistor close to the ADC if the input sampler requires it.
What is the difference between TLV2764IN and TLV2764CN?
The TLV2764IN and TLV2764CN are both quad RRIO operational amplifiers in the same TLV2764 family and 14-PDIP package, but their ordering temperature grades differ. TLV2764IN is identified as the industrial-temperature option covering -40 °C to +85 °C, while TLV2764CN is the commercial-temperature ordering option. According to Texas Instruments ordering information, TLV2764CN provides the closer replacement when operating-temperature coverage is sufficient.
When should I choose TLV2764IN over TLV2764CN?
Choose TLV2764IN when the circuit must operate across the industrial temperature range of -40 °C to +85 °C. TLV2764CN is appropriate when the application remains within the commercial temperature grade and its electrical limits. Both parts use four rail-to-rail amplifiers, a 1.8 V minimum supply, 500 kHz bandwidth, and a 14-PDIP package, so the temperature grade is the decisive qualification point.
What can replace TLV2764IN in a pin-compatible design?
TLV2764CN is the closest same-package replacement for the TLV2764IN because both are quad RRIO amplifiers in 14-PDIP packages with the same 1.8 V to 3.6 V supply class and 500 kHz bandwidth. The principal difference is temperature grade: TLV2764IN covers -40 °C to +85 °C, while TLV2764CN is the commercial option. Confirm the complete ordering table and electrical limits in the manufacturer datasheet.
Is TLV2764IN the same as TLV2764CN?
No, the TLV2764IN and TLV2764CN share the same functional amplifier family and 14-PDIP footprint, but they are not identical ordering options. TLV2764IN is the industrial-temperature version rated from -40 °C to +85 °C, while TLV2764CN is the commercial-temperature version. For a drop-in PCB position, verify that the commercial grade remains within every temperature requirement of the final equipment.
Where to buy TLV2764IN online?
Use the Request a Quote form on this page to request TLV2764IN availability, lead time, and order details. The form can be submitted with the exact 14-PDIP industrial-temperature MPN, reducing ambiguity with other TLV2764 package and temperature options. The manufacturer lists the family for ordering, while current commercial inventory and delivery schedules should be confirmed through the quote workflow.
What is the price of TLV2764IN?
The current TLV2764IN price is generated through the Request a Quote form on this page rather than stated as a static figure. Submit the exact MPN and required quantity to obtain current commercial terms. Because the TLV2764 family includes several package and temperature-grade order codes, request TLV2764IN specifically to avoid pricing or availability responses for a different 14-PDIP option.
What is the lead time and stock status for TLV2764IN?
Current TLV2764IN stock status and lead time should be confirmed through the Request a Quote form on this page. Request the exact MPN, required quantity, and acceptable ship date so the response can reflect the selected order configuration. The Texas Instruments product page provides the authoritative family and ordering information, while live fulfillment status is handled through the quotation process.
Is TLV2764IN in stock?
Use the Request a Quote form on this page to check current TLV2764IN inventory status and obtain an order response for the quantity required. Include the exact TLV2764IN MPN and state whether unopened production or scheduled delivery is acceptable. This avoids conflating availability of the TLV2764 family with the specific 14-PDIP, industrial-temperature ordering option.

엔지니어링 참조 데이터: TLV2764IN — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose TLV2764IN when the application requires four rail-to-rail amplifiers, a 1.8 V to 3.6 V supply range, 500 kHz bandwidth, and operation across -40 °C to +85 °C. Its 20 µA per-amplifier current suits portable and distributed measurement systems, while the 14-PDIP package simplifies through-hole assembly. TLV2764CN is the closest same-footprint functional alternative when the product operates within its commercial temperature grade; its amplifier architecture, voltage range, bandwidth, and current consumption are otherwise intended to match. This substitution should not be made for equipment exposed to temperatures outside the commercial grade. The TLV2764IN may also be unnecessary if an application does not require rail-to-rail behavior, four channels, or operation down to 1.8 V, because broader op-amp families can offer different bandwidth, noise, offset, or power specifications.

대체품과의 비교

파라미터 이 제품 TLV2764CN
Brand Texas Instruments Texas Instruments
Package 14-PDIP, 14 pins 14-PDIP, 14 pins - same
Number of Amplifiers 4 channels 4 channels
Supply Voltage Range 1.8 V to 3.6 V 1.8 V to 3.6 V
Gain-Bandwidth Product 500 kHz 500 kHz
Supply Current 20 µA per amplifier 20 µA per amplifier
Rail-to-Rail Input and Output Yes Yes
Operating Temperature Range -40 °C to +85 °C Commercial-temperature grade; exact limit not stated in the cited data
Mounting Type Through-hole Through-hole

주요 차별점

  • Industrial-temperature coverage (vs TLV2764CN)
  • Four-channel integration (vs TLV2764CN)
  • Low-voltage signal conditioning (vs TLV2764CN)

설계 노트

Decouple the supply pins with a local bypass capacitor and route it through a short ground path to reduce supply-borne noise. Keep analog signal traces away from the supply entry and high-current return paths. Because the amplifier operates down to 1.8 V, verify that every external signal remains inside the input common-mode range and that the supply rail has adequate startup and transient margin.

Place the 14-PDIP in the orientation shown by the manufacturer pin drawing, with pin 1 clearly marked at the board edge. Route each amplifier's feedback components close to their associated pins to minimize parasitic resistance and capacitance. Keep the four channels physically separated when they carry unrelated signals, and use an uninterrupted ground region beneath or near the device where the board design permits.

Do not treat rail-to-rail operation as unrestricted input or output range; input common-mode limits, output swing, and supply voltage must be checked for each configuration. Also account for amplifier input offset and noise when resolving low-level signals. Before substituting TLV2764CN for TLV2764IN, confirm that the commercial temperature grade covers the complete operating environment.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The cited product and datasheet pages do not state the requested environmental and material-compliance classifications. AEC-Q100 is not applicable because this ordering option is identified as a general-purpose industrial-temperature amplifier rather than an automotive-qualified variant.

관련 검색

TLV2764IN datasheet TLV2764IN pinout TLV2764IN datasheet pdf TLV2764IN equivalent TLV2764IN replacement TLV2764IN price TLV2764IN stock Texas Instruments TLV2764IN TLV2764IN 14-PDIP pinout TLV2764IN 500 kHz amplifier TLV2764IN low voltage sensor interface TLV2764IN vs TLV2764CN

관련 부품 & 용어

Texas Instruments TLV2764IN TLV2764CN TLV2764 TLV276x operational amplifier quad operational amplifier analog signal-conditioning IC rail-to-rail input rail-to-rail output RRIO gain-bandwidth product 500 kHz 20 µA operating current 1.8 V minimum supply 3.6 V maximum recommended supply 14-PDIP PDIP package through-hole mounting battery-powered instrumentation ADC signal conditioning active filtering industrial temperature range -40 °C to +85 °C
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기