TUSB3210PMG4 - 3.3V USB 2.0 8052 MCU | Texas Instruments
MPN: TUSB3210PMG4 ✓ AktifTUSB3210PMG4 Ringkasan
An application-specific microcontroller is an embedded processing IC optimized for a defined peripheral function or interface rather than for general application processing. The TUSB3210 belongs to the microcontroller hierarchy, combining an 8052-compatible CPU core with a USB device controller, on-chip program memory, RAM, and EEPROM. This integration allows a USB-to-GPIO or similar peripheral design to enumerate as a full-speed USB device while reducing the number of external components.
The principal operating characteristics are a 3.3 V supply, USB 2.0 full-speed connectivity, an 8052 microcontroller core, and a 64-terminal LQFP package. Its 64 terminals provide access to the controller, firmware-programmable I/O, clock, reset, power, and USB functions. The G4 ordering designation corresponds to the commercial-temperature, tray-packaged configuration identified in the Texas Instruments product information.
TUSB3210PMG4 integrates USB connectivity with programmable GPIO behavior rather than requiring a conventional USB PHY and external microcontroller as separate components. The EEPROM supports configuration or parameter retention, while the 8052 core executes the device firmware that identifies the peripheral and controls its external interfaces. Because the device is a dedicated USB controller, its principal engineering task is validating the complete pin, firmware, timing, and USB enumeration design before a board is released.
Typical applications include USB-to-GPIO adapters, configurable peripheral controllers, data-acquisition front ends, legacy equipment interfaces, and industrial interface modules. The integrated USB controller can also support firmware-based product identification, control, and status reporting over a full-speed USB connection. External transceivers, protection components, crystals, and storage may still be required according to the selected board architecture.
Use the manufacturer pin-description table and reference schematic when assigning PCB tracks, especially for USB data, clock, reset, and exposed supply connections. Preserve the specified decoupling arrangement, maintain controlled USB impedance routing, and validate firmware behavior across bus-powered and externally powered operating conditions.
This page combines the manufacturer catalog identity, verified package and ordering information, a strict drop-in replacement assessment, and practical implementation guidance. It also distinguishes the electrically and mechanically interchangeable ordering option from devices that only perform a similar USB-interface function but do not share the 64-pin LQFP footprint.
Alternatif penggantian untuk TUSB3210PMG4 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian TUSB3210PMG4 (sama faktor bentuk dan footprint) — berbeda di dalam Device Type, Microcontroller Core, Package Type.
TUSB3210PM
✅ Drop-InKontak untuk harga
Lihat Datasheet →TUSB3210PMG4 Rating Maksimal & Karakteristik Listrik
| Device Type | Application-specific USB microcontroller |
| Microcontroller Core | 8052 |
| USB Interface | USB 2.0 full-speed |
| Tegangan Pemuat Kerja | 3.3 V |
| Package Type | 64-pin LQFP |
| Terminal Count | 64 terminals |
| Package Shape | Square |
| Terminal Form | Gull wing |
| Tipe Mounting | Surface mount |
| Delivery Format | Tray |
| Temperature Grade | Commercial |
TUSB3210PMG4 square Diamant Konfigurasi Panduan
Konfigurasi pin untuk TUSB3210PMG4 (square pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.
Tidak ada data diatribut pin yang tersedia untuk TUSB3210PMG4.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
TUSB3210PMG4 cocok untuk 6 aplikasis: USB-to-GPIO Control Adapter, Industrial Data-Acquisition Front End, Legacy Equipment USB Interface, Configurable Peripheral Controller, Instrumentation Configuration Interface, USB Communication Module.
USB-to-GPIO Control Adapter
The TUSB3210PMG4 fits a USB-to-GPIO adapter because it combines a 3.3 V full-speed USB 2.0 interface with an 8052 microcontroller core and integrated EEPROM in one 64-pin LQFP package. Firmware can implement the USB descriptors, accept commands from the host, and drive application-specific output states while retaining configuration data in EEPROM. The integrated architecture reduces the need for separate host-interface and logic ICs. Designers should confirm the required GPIO count, firmware loading method, and output timing in the manufacturer datasheet before assigning the 64 available terminals.
Direkomendasikan
Industrial Data-Acquisition Front End
The TUSB3210PMG4 can serve as the USB control front end of an industrial data-acquisition module because its 8052 core processes commands locally while the full-speed USB 2.0 interface carries measurement-control traffic to a host. A 3.3 V supply requirement supports integration with modern mixed-signal systems, and integrated EEPROM can retain calibration or configuration parameters. Its 64-terminal LQFP package also exposes the GPIO resources needed to coordinate converters, indicators, and control signals. The acquisition front end should include suitable analog isolation, input protection, and grounding outside the controller.
Direkomendasikan
Legacy Equipment USB Interface
The TUSB3210PMG4 is appropriate for adding a modern USB connection to legacy or semi-custom equipment when the equipment can be represented as a full-speed USB peripheral with an 8052 firmware application. The dedicated USB controller handles enumeration while the microcontroller manages buttons, status lamps, relays, or legacy serial logic through its GPIO. Its 3.3 V operation and 64-LQFP footprint support compact interface boards, while integrated EEPROM provides nonvolatile configuration storage. Firmware should include stable descriptors, compatible device identification, and appropriate host-driver behavior for reliable replacement of older connectivity.
Direkomendasikan
Configurable Peripheral Controller
The TUSB3210PMG4 fits configurable peripheral products that need programmable GPIO behavior, host commands, and retained setup data without a general-purpose external processor. Its 8052 core runs the peripheral control firmware, the full-speed USB 2.0 interface provides the host connection, and the integrated EEPROM can store product-specific parameters. With 64 terminals in a surface-mount LQFP package, the device can connect control outputs, status inputs, and interface signals on a compact board. The implementation should define timing and pin ownership in firmware and validate every connected peripheral against the device electrical limits.
Direkomendasikan
Instrumentation Configuration Interface
The TUSB3210PMG4 can provide a configuration and control interface for laboratory or field instrumentation where a host must set operating modes, read status, and update stored parameters. The 8052 core can coordinate the instrument's local functions, while the USB 2.0 full-speed interface supplies a standard enumeration path over a 3.3 V rail. Integrated EEPROM is useful for retaining instrument settings between power cycles, reducing external storage requirements. Engineers should use buffered external connectors, ESD protection, and tested USB routing because the controller handles the protocol layer rather than every protection requirement.
Direkomendasikan
USB Communication Module
The TUSB3210PMG4 can form the core of a dedicated USB communication module for OEM equipment that needs programmable I/O in addition to standard host connectivity. The 3.3 V full-speed USB 2.0 interface supports enumeration and command exchange, while the 8052 core executes the device-specific protocol. Its 64-terminal LQFP package allows the module to expose application signals and integrate status indicators within a small assembly. The module design should separate protected external I/O from the controller, validate bus-powered current behavior, and use the manufacturer reference circuit to reproduce the required clock, reset, and USB support network.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk TUSB3210PMG4 — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | TUSB3210PM |
|---|---|---|
| Package | 64-pin LQFP | 64-pin LQFP |
| Brand | Texas Instruments | Texas Instruments |
| Microcontroller Core | 8052 | 8052 |
| USB Interface | Full-speed USB 2.0 | Full-speed USB 2.0 |
| Operating Supply Voltage | 3.3 V | 3.3 V |
| Terminal Count | 64 terminals | 64 terminals |
Diferensiator Kunci
- Identified commercial tray ordering configuration (vsTUSB3210PM)
- Dedicated USB controller integration (vsTUSB3210PM)
- Single-package USB and GPIO implementation (vsTUSB3210PM)
Catatan Desain
Assign USB data, clock, reset, power, ground, and GPIO nets directly from the 64-pin LQFP pin-description table rather than inferring connections from a generic 8052 schematic. Keep the input and output capacitors close to their designated supply terminals, provide a clean ground reference, and route sensitive signals away from the USB data pair. Verify the PCB land pattern against the 64-terminal package drawing before fabrication because the LQFP lead pitch and courtyard must match exactly.
Implement the USB interface as a controlled-impedance point-to-point connection between the controller and connector, following the manufacturer's reference layout for trace length, impedance, and return-path continuity. Avoid stubs and test pads on the data nets unless their effects are explicitly evaluated. Place ESD protection close to the connector and maintain a continuous ground reference beneath the interface so transient current does not propagate through controller-side signal paths.
Budget the 3.3 V rail for the controller, clock support circuitry, pull networks, external I/O loads, and the amount of current drawn from a USB bus-powered source. Place local bypass capacitance at the supply terminals and keep high-current switching or LED loads away from the USB and digital signal area. Validate startup sequencing, reset behavior, and input tolerances in the assembled system rather than treating the nominal supply voltage as the only power requirement.
Do not substitute a USB bridge merely because it also uses an 8052 core or supports USB. The replacement must match the complete 64-pin LQFP footprint, assigned signals, firmware programming model, supply requirements, and operating grade. For TUSB3210PM, check the manufacturer's ordering information and compare every footprint and pin-description entry. A package with a similar device function but a different lead count or signal arrangement is not a drop-in replacement.
Informasi Konformitas
The commercial catalog record identifies the temperature grade as commercial but does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable unless the exact ordering configuration is offered as an automotive-qualified variant.