Texas Instruments

TUSB3210PMG4 - 3.3V USB 2.0 8052 MCU | Texas Instruments

MPN: TUSB3210PMG4 ✓ Aktif
3.3 V Vdss 64-pin LQFP Package
MOQ: 1 |

TUSB3210PMG4 Ringkasan

Texas Instruments TUSB3210PMG4 is an application-specific USB microcontroller with an 8052 core, USB 2.0 interface, 3.3 V supply operation, and integrated EEPROM in a 64-pin LQFP package. It is packaged in a tray for commercial-temperature production systems.

An application-specific microcontroller is an embedded processing IC optimized for a defined peripheral function or interface rather than for general application processing. The TUSB3210 belongs to the microcontroller hierarchy, combining an 8052-compatible CPU core with a USB device controller, on-chip program memory, RAM, and EEPROM. This integration allows a USB-to-GPIO or similar peripheral design to enumerate as a full-speed USB device while reducing the number of external components.

The principal operating characteristics are a 3.3 V supply, USB 2.0 full-speed connectivity, an 8052 microcontroller core, and a 64-terminal LQFP package. Its 64 terminals provide access to the controller, firmware-programmable I/O, clock, reset, power, and USB functions. The G4 ordering designation corresponds to the commercial-temperature, tray-packaged configuration identified in the Texas Instruments product information.

TUSB3210PMG4 integrates USB connectivity with programmable GPIO behavior rather than requiring a conventional USB PHY and external microcontroller as separate components. The EEPROM supports configuration or parameter retention, while the 8052 core executes the device firmware that identifies the peripheral and controls its external interfaces. Because the device is a dedicated USB controller, its principal engineering task is validating the complete pin, firmware, timing, and USB enumeration design before a board is released.

Typical applications include USB-to-GPIO adapters, configurable peripheral controllers, data-acquisition front ends, legacy equipment interfaces, and industrial interface modules. The integrated USB controller can also support firmware-based product identification, control, and status reporting over a full-speed USB connection. External transceivers, protection components, crystals, and storage may still be required according to the selected board architecture.

Use the manufacturer pin-description table and reference schematic when assigning PCB tracks, especially for USB data, clock, reset, and exposed supply connections. Preserve the specified decoupling arrangement, maintain controlled USB impedance routing, and validate firmware behavior across bus-powered and externally powered operating conditions.

This page combines the manufacturer catalog identity, verified package and ordering information, a strict drop-in replacement assessment, and practical implementation guidance. It also distinguishes the electrically and mechanically interchangeable ordering option from devices that only perform a similar USB-interface function but do not share the 64-pin LQFP footprint.

Pilihan pengganti yang segera untuk TUSB3210PMG4 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera TUSB3210PMG4 (sama faktor bentuk dan kaki) — berbeza dalam Device Type, Microcontroller Core, Package Type.

Texas Instruments
Device Type: USB 2.0 general-purpose device controller with 8052-based microcontroller
Microcontroller Core: Integrated 8052 microcontroller
Package Type: 64-LQFP
Bandingkan Dengan TUSB3210PMG4 →

TUSB3210PM

✅ Masuk Drop-In
Texas Instruments
📦 64-LQFP
USB 2.0 general-purpose device controller with 8052-based microcontroller · USB 2.0 Full-Speed · 12 Mbit/s · Integrated 8052 microcontroller · 8K x 8 bytes (8,192 bytes) · Supported · Supported · Supported

Hubungi untuk harga

Lihat Datasheet →

TUSB3210PMG4 Penilaian maksimum & Ciri-ciri Elektrik

Device Type Application-specific USB microcontroller
Microcontroller Core 8052
USB Interface USB 2.0 full-speed
Tegangan Pemberi Arus Operasi 3.3 V
Package Type 64-pin LQFP
Terminal Count 64 terminals
Package Shape Square
Terminal Form Gull wing
Jenis Pemasangan Surface mount
Delivery Format Tray
Temperature Grade Commercial

Panduan Konfigurasi Pin TUSB3210PMG4 square

Konfigurasi pin untuk TUSB3210PMG4 (square pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.

Garis bentuk pengecah pakai square untuk TUSB3210PMG4

Tiada data garisan pin yang diperoleh untuk TUSB3210PMG4.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

TUSB3210PMG4 patut untuk 6 aplikasis: USB-to-GPIO Control Adapter, Industrial Data-Acquisition Front End, Legacy Equipment USB Interface, Configurable Peripheral Controller, Instrumentation Configuration Interface, USB Communication Module.

🔧

USB-to-GPIO Control Adapter

The TUSB3210PMG4 fits a USB-to-GPIO adapter because it combines a 3.3 V full-speed USB 2.0 interface with an 8052 microcontroller core and integrated EEPROM in one 64-pin LQFP package. Firmware can implement the USB descriptors, accept commands from the host, and drive application-specific output states while retaining configuration data in EEPROM. The integrated architecture reduces the need for separate host-interface and logic ICs. Designers should confirm the required GPIO count, firmware loading method, and output timing in the manufacturer datasheet before assigning the 64 available terminals.

🏭

Industrial Data-Acquisition Front End

The TUSB3210PMG4 can serve as the USB control front end of an industrial data-acquisition module because its 8052 core processes commands locally while the full-speed USB 2.0 interface carries measurement-control traffic to a host. A 3.3 V supply requirement supports integration with modern mixed-signal systems, and integrated EEPROM can retain calibration or configuration parameters. Its 64-terminal LQFP package also exposes the GPIO resources needed to coordinate converters, indicators, and control signals. The acquisition front end should include suitable analog isolation, input protection, and grounding outside the controller.

🖥️

Legacy Equipment USB Interface

The TUSB3210PMG4 is appropriate for adding a modern USB connection to legacy or semi-custom equipment when the equipment can be represented as a full-speed USB peripheral with an 8052 firmware application. The dedicated USB controller handles enumeration while the microcontroller manages buttons, status lamps, relays, or legacy serial logic through its GPIO. Its 3.3 V operation and 64-LQFP footprint support compact interface boards, while integrated EEPROM provides nonvolatile configuration storage. Firmware should include stable descriptors, compatible device identification, and appropriate host-driver behavior for reliable replacement of older connectivity.

⚙️

Configurable Peripheral Controller

The TUSB3210PMG4 fits configurable peripheral products that need programmable GPIO behavior, host commands, and retained setup data without a general-purpose external processor. Its 8052 core runs the peripheral control firmware, the full-speed USB 2.0 interface provides the host connection, and the integrated EEPROM can store product-specific parameters. With 64 terminals in a surface-mount LQFP package, the device can connect control outputs, status inputs, and interface signals on a compact board. The implementation should define timing and pin ownership in firmware and validate every connected peripheral against the device electrical limits.

🔬

Instrumentation Configuration Interface

The TUSB3210PMG4 can provide a configuration and control interface for laboratory or field instrumentation where a host must set operating modes, read status, and update stored parameters. The 8052 core can coordinate the instrument's local functions, while the USB 2.0 full-speed interface supplies a standard enumeration path over a 3.3 V rail. Integrated EEPROM is useful for retaining instrument settings between power cycles, reducing external storage requirements. Engineers should use buffered external connectors, ESD protection, and tested USB routing because the controller handles the protocol layer rather than every protection requirement.

🌐

USB Communication Module

The TUSB3210PMG4 can form the core of a dedicated USB communication module for OEM equipment that needs programmable I/O in addition to standard host connectivity. The 3.3 V full-speed USB 2.0 interface supports enumeration and command exchange, while the 8052 core executes the device-specific protocol. Its 64-terminal LQFP package allows the module to expose application signals and integrate status indicators within a small assembly. The module design should separate protected external I/O from the controller, validate bus-powered current behavior, and use the manufacturer reference circuit to reproduce the required clock, reset, and USB support network.

What is the TUSB3210PMG4?
The TUSB3210PMG4 is a Texas Instruments application-specific microcontroller combining an 8052 core with a full-speed USB 2.0 device interface and integrated EEPROM. According to the Texas Instruments manufacturer datasheet, it operates from a 3.3 V supply and is offered in a 64-pin LQFP package. The device is intended for compact USB peripheral designs where a dedicated controller can replace separate USB-interface and general-purpose processing components.
What are the key specifications of TUSB3210PMG4?
The key TUSB3210PMG4 specifications are an 8052 microcontroller core, full-speed USB 2.0 connectivity, a 3.3 V operating supply, integrated EEPROM, and a 64-terminal LQFP package. According to the Texas Instruments manufacturer datasheet, the square gull-wing package is surface mounted and the G4 configuration is supplied in a tray for commercial-temperature applications. GPIO count, clock rate, and memory capacities should be confirmed in the device datasheet before final board design.
Where can I download the TUSB3210PMG4 datasheet PDF?
The TUSB3210PMG4 datasheet PDF can be downloaded from the linked documentation source on this page, while the Texas Instruments product and cross-reference resources can be used to identify related ordering information. The manufacturer datasheet is the controlling document for the 64-pin assignments, USB routing requirements, electrical characteristics, and programming model. Review its pin-description table and reference circuit before assigning PCB signals.
Where is the pinout for TUSB3210PMG4?
The TUSB3210PMG4 pinout is defined by the 64-pin LQFP pin-description table in the Texas Instruments manufacturer datasheet. The package uses 64 gull-wing terminals in a square surface-mount outline, but a complete numbered signal list is not reproduced here. Use the manufacturer pin table when assigning power, ground, clock, reset, USB, and programmable I/O nets, and cross-check every board footprint against the package drawing.
What USB speed does TUSB3210PMG4 support?
The TUSB3210PMG4 supports full-speed operation under the USB 2.0 specification. According to the Texas Instruments manufacturer datasheet, this dedicated controller includes an 8052 processing core, allowing the device to enumerate as a USB peripheral and execute firmware that drives its GPIO and application-specific interfaces. Its USB implementation and required external support components should be compared with the target device's reference schematic.
Can TUSB3210PMG4 be used for a USB-to-GPIO adapter?
The TUSB3210PMG4 is suitable for a USB-to-GPIO adapter when the required firmware and electrical interface match its 8052 core and GPIO resources. The controller provides full-speed USB 2.0 connectivity, integrated EEPROM, and 64 LQFP terminals in a 3.3 V design. Before layout release, confirm the required GPIO count, firmware loading method, device descriptor, bus-power budget, and connector protection against the Texas Instruments datasheet.
TUSB3210PMG4 vs TUSB3210PM - which is better?
The TUSB3210PMG4 is the more explicit ordering choice when a commercial-temperature, tray-packaged 64-pin LQFP device is required, while TUSB3210PM is identified as the same TUSB3210 8052 USB microcontroller family. The catalog descriptions identify both as 64-LQFP devices, supporting direct footprint consideration. Final substitution still depends on the manufacturer's ordering table, temperature grade, package code, and programmed-device configuration.
When should I choose TUSB3210PMG4 over TUSB3210PM?
Choose TUSB3210PMG4 when the BOM must explicitly specify the G4 commercial-grade, tray configuration and the released PCB expects the 64-pin LQFP footprint. The alternative TUSB3210PM is also described as an 8052 TUSB3210 USB microcontroller in a 64-LQFP package, so its electrical and mechanical similarity makes it a practical same-family option. Confirm the exact package drawing, grade suffix, and availability before approving either ordering code.
What can replace TUSB3210PMG4?
The TUSB3210PM is the clearest drop-in candidate for TUSB3210PMG4 because both are identified as 8052-based TUSB3210 USB microcontrollers in 64-pin LQFP packages. Its core and USB interface remain aligned, with the G4 designation identifying the commercial-temperature tray ordering option. Verify the pin assignments, memory resources, firmware behavior, and exact package dimensions in the Texas Instruments datasheet before using it as a production replacement.
Is TUSB3210PM the same as TUSB3210PMG4?
TUSB3210PM and TUSB3210PMG4 are closely related members of the same TUSB3210 family, but the G4 suffix communicates an ordering condition rather than a different USB function. Both catalog records identify an 8052 TUSB3210 USB microcontroller in a 64-LQFP package. They can be treated as footprint-compatible candidates, while the manufacturer ordering information must confirm commercial grade, tray packaging, and any programmed-memory differences.
What is the best Texas Instruments equivalent for TUSB3210PMG4?
The best same-manufacturer equivalent identified for TUSB3210PMG4 is TUSB3210PM. It preserves the 8052 core, full-speed USB 2.0 controller role, and 64-pin LQFP package format, making it more credible as a PCB-compatible choice than a USB controller in a different package. The decision should be based on the Texas Instruments ordering table rather than functional similarity alone, especially for temperature grade and programmed-device requirements.
Where can I buy TUSB3210PMG4 online?
Use the Request a Quote form on this page to ask about TUSB3210PMG4 availability, order quantities, and delivery terms. The part is identified in current distributor catalogs as a Texas Instruments 64-LQFP, tray-packaged USB microcontroller. Commercial confirmation should include the exact MPN, grade suffix, lead time, and shipping quantity so that the quoted material matches the released BOM.
What is the price of TUSB3210PMG4?
The current commercial price for TUSB3210PMG4 should be obtained through the Request a Quote form on this page. The form allows quantity, target delivery date, and shipment details to be included with the inquiry, which is important for an older specialty USB controller sold in a 64-LQFP tray configuration. Use the returned quotation for purchasing decisions because component pricing and supply status can change.
What is the lead time and stock status for TUSB3210PMG4?
Request the current stock position, minimum order quantity, and lead time for TUSB3210PMG4 through the Request a Quote form on this page. Current distributor catalog records identify the exact MPN, but a catalog appearance alone does not establish the quantity available for a specific shipment. Include the required tray quantity and production schedule with the inquiry so scheduling can be confirmed accurately.
What compliance and programming information applies to TUSB3210PMG4?
The TUSB3210PMG4 should be programmed and qualified against the Texas Instruments manufacturer datasheet, which defines its 8052 firmware environment, USB descriptors, and device-specific operating requirements. RoHS, REACH, AEC-Q100 qualification, and halogen-free status are not established by the available catalog records and should therefore be confirmed for the ordered configuration. AEC-Q100 is generally not applicable unless the exact product is explicitly offered in an automotive-qualified grade.

Data referensi kejuruteraan untuk TUSB3210PMG4 — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose TUSB3210PMG4 when the released design specifically calls for the G4 commercial-temperature, tray-packaged ordering option and its 64-pin LQFP footprint. Choose TUSB3210PM when procurement needs another ordering representation of the same TUSB3210 8052 USB-controller family and the manufacturer ordering table confirms equivalent electrical grade, pin assignments, and package dimensions. Neither part should be replaced by a generic USB-to-UART or USB-to-serial controller unless the complete pinout, firmware behavior, connector arrangement, and application interface are redesigned. The strongest engineering reason to retain this device family is its integration of a 3.3 V full-speed USB 2.0 controller, an 8052 processing core, programmable I/O, and EEPROM in one 64-terminal LQFP package. Before release, verify memory capacities, GPIO count, clock requirements, and programming details directly in the manufacturer datasheet because those values are not established by the catalog listing.

Perbandingan dengan Gantian

Parametr Produk Ini TUSB3210PM
Package 64-pin LQFP 64-pin LQFP
Brand Texas Instruments Texas Instruments
Microcontroller Core 8052 8052
USB Interface Full-speed USB 2.0 Full-speed USB 2.0
Operating Supply Voltage 3.3 V 3.3 V
Terminal Count 64 terminals 64 terminals

Penyeberangsung Jelas

  • Identified commercial tray ordering configuration (vsTUSB3210PM)
  • Dedicated USB controller integration (vsTUSB3210PM)
  • Single-package USB and GPIO implementation (vsTUSB3210PM)

Catatan Desain

Assign USB data, clock, reset, power, ground, and GPIO nets directly from the 64-pin LQFP pin-description table rather than inferring connections from a generic 8052 schematic. Keep the input and output capacitors close to their designated supply terminals, provide a clean ground reference, and route sensitive signals away from the USB data pair. Verify the PCB land pattern against the 64-terminal package drawing before fabrication because the LQFP lead pitch and courtyard must match exactly.

Implement the USB interface as a controlled-impedance point-to-point connection between the controller and connector, following the manufacturer's reference layout for trace length, impedance, and return-path continuity. Avoid stubs and test pads on the data nets unless their effects are explicitly evaluated. Place ESD protection close to the connector and maintain a continuous ground reference beneath the interface so transient current does not propagate through controller-side signal paths.

Budget the 3.3 V rail for the controller, clock support circuitry, pull networks, external I/O loads, and the amount of current drawn from a USB bus-powered source. Place local bypass capacitance at the supply terminals and keep high-current switching or LED loads away from the USB and digital signal area. Validate startup sequencing, reset behavior, and input tolerances in the assembled system rather than treating the nominal supply voltage as the only power requirement.

Do not substitute a USB bridge merely because it also uses an 8052 core or supports USB. The replacement must match the complete 64-pin LQFP footprint, assigned signals, firmware programming model, supply requirements, and operating grade. For TUSB3210PM, check the manufacturer's ordering information and compare every footprint and pin-description entry. A package with a similar device function but a different lead count or signal arrangement is not a drop-in replacement.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The commercial catalog record identifies the temperature grade as commercial but does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable unless the exact ordering configuration is offered as an automotive-qualified variant.

Pencarian Berhubungan

TUSB3210PMG4 TUSB3210PMG4 datasheet TUSB3210PMG4 datasheet pdf TUSB3210PMG4 pinout TUSB3210PMG4 replacement TUSB3210PMG4 equivalent TUSB3210PMG4 vs TUSB3210PM TUSB3210PMG4 8052 USB 2.0 TUSB3210PMG4 3.3V LQFP TUSB3210PMG4 USB-to-GPIO Texas Instruments TUSB3210PMG4 TUSB3210PMG4 price

Komponen dan Tanda berkaitan

Texas Instruments TUSB3210PMG4 TUSB3210PM 8052 microcontroller USB 2.0 full-speed USB device application-specific microcontroller microcontroller USB interface controller embedded processor semiconductor EEPROM program memory RAM GPIO 3.3 V power supply 64-pin LQFP LQFP package family surface-mount package commercial temperature grade USB-to-GPIO adapter industrial data acquisition legacy equipment interface
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ