Texas Instruments

TUSB7340RKMR - 4-Port USB 3.0 xHCI Host Controller | TI

MPN: TUSB7340RKMR ✓ Aktif
1.1 V Vdss 100-pin WQFN exposed-pad package, 9 x 9 mm Package SuperSpeed, high-speed, full-speed, and low-speed Speed
MOQ: 1 |

TUSB7340RKMR Ringkasan

The Texas Instruments TUSB7340RKMR is a four-port USB 3.0 xHCI host controller with PCIe x1 Gen 2 host connectivity, 1.1 V and 3.3 V supply support, and a 100-pin WQFN exposed-pad package measuring 9 x 9 mm. It supports SuperSpeed, high-speed, full-speed, and low-speed USB downstream connections while implementing USB 3.0 xHCI host-controller functionality.

An xHCI host controller is a type of USB interface controller used within the broader hierarchy of interface ICs, USB host controllers, and computer interface semiconductors. It centralizes host-side USB transaction handling, port management, and command scheduling in systems that need to manage multiple external USB devices through one host interface. The TUSB7340 is intended for embedded systems, industrial equipment, test systems, and other designs that need more than a conventional two-port host controller.

The principal feature of the TUSB7340RKMR is support for up to four downstream USB ports. According to the Texas Instruments TUSB7340 product page, the device is a SuperSpeed USB 3.0 four-port xHCI host controller. Its host-system interface is PCIe x1 Gen 2, allowing the controller to communicate with a host processor over a high-speed serial link. The device also supports USB 2.0 device speeds, providing backward compatibility for devices that do not operate at SuperSpeed.

The TUSB7340 uses a 100-pin RKM WQFN package with an exposed thermal pad and operates from low-level 1.1 V and 3.3 V supplies identified in the manufacturer documentation. This split-supply arrangement supports low-power and high-speed sections of the controller. Thermal performance depends on effective copper area under the exposed pad, PCB layer count, airflow, and the total power dissipated by the controller during link training and USB traffic.

Typical applications include embedded computing platforms, industrial test equipment, set-top and media systems, data-acquisition systems, and external USB port expanders. In each case, the controller provides a standardized way for a PCIe-capable host processor to manage up to four USB downstream ports. System firmware must provide xHCI initialization, device enumeration, power management, and driver support through the host operating system.

PCB implementation should prioritize the exposed-pad connection, PCIe signal integrity, and USB SuperSpeed routing. Place the exposed pad on a solid thermal and ground plane, use a continuous via field where appropriate, and follow the reference-plane and length-matching guidance in the manufacturer datasheet. Keep high-speed differential routes away from noisy power-conversion nodes.

This product page combines manufacturer interface details, ordering information, packaging constraints, and engineering guidance into a focused selection reference. It also distinguishes genuine pin-compatible alternatives from parts that merely share a generic controller category, helping engineers assess whether a substitution preserves USB topology, PCIe connectivity, electrical rails, and the 100-pin RKM land pattern.

Alternatif penggantian untuk TUSB7340RKMR — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian TUSB7340RKMR (sama faktor bentuk dan footprint) — berbeda di dalam Package, RoHS Status, Operating Temperature, Technology, Battery Charging Support.

Texas Instruments
Package: 100-WQFN-MR (RKM) 9x9 mm with EP
RoHS Status: Compliant
Operating Temperature: 0C to +70C (commercial)
Bandingkan dengan TUSB7340RKMR →
Texas Instruments
Package: 100-WQFN-MR (RKM) 9x9 mm
RoHS Status: Compliant (Green)
Technology: PCI, I2C, CMOS
Bandingkan dengan TUSB7340RKMR →
Texas Instruments
Package: 100-WQFN-MR (RKM), 9x9 mm
RoHS Status: unknown
Bandingkan dengan TUSB7340RKMR →

TUSB7340IRKMR

✅ Drop-In
📦 100-pin WQFN exposed-pad package (RKM, 9 x 9 mm)
Same TUSB7340 four-port controller and RKM footprint; ordering and temperature-grade details differ, with the comparison listing showing an operating range of -40 °C to 85 °C versus 0 °C to 70 °C for TUSB7340RKMR.

📋 Alternatif referensi (tidak dalam katalog)

TUSB7320RKMR

✅ Drop-In
Texas Instruments
📦 100-pin WQFN exposed-pad package (RKM, 9 x 9 mm)
USB 3.0 xHCI Host Controller · 2 · SuperSpeed (5 Gbps), High/Full/Low Speed · PCIe x1 Gen 2 · 1.1 V and 3.3 V · 0 °C to 70 °C · 100-WQFN-MR (RKM) 9x9 mm · 100

Kontak untuk harga

Lihat Datasheet →

TUSB7320IRKMR

✅ Drop-In
📦 100-pin WQFN exposed-pad package (RKM, 9 x 9 mm)
Same 100-pin RKM footprint and two-port TUSB7320 controller; port capacity is reduced from 4 to 2, while the alternative ordering variant uses a wider identified temperature range.

📋 Alternatif referensi (tidak dalam katalog)

TUSB7340RKMR Spesifikasi

Device Type USB 3.0 xHCI host controller
Maximum Downstream Ports 4 ports
USB Interface USB 3.0 SuperSpeed with USB 2.0 backward compatibility
Supported USB Speeds SuperSpeed, high-speed, full-speed, and low-speed
Host Interface PCIe x1 Gen 2
PCIe Interface Width x1
PCIe Interface Generation Gen 2
Low-Voltage Supply 1.1 V
Main Supply 3.3 V
Paket 100-pin WQFN exposed-pad package, 9 x 9 mm
Package Designation RKM
Jumlah Pin 100 pins
Tipe Mounting Surface mount
Suhu Kerja 0 °C to 70 °C
Technology CMOS
xHCI Compliance USB 3.0 xHCI, revision 0.96

TUSB7340RKMR rkm Diamant Konfigurasi Panduan

Konfigurasi pin untuk TUSB7340RKMR (rkm pakai pakai). Penomoran pin, fungsi, dan diagram koneksi ditetapkan dalam datasheet produsen. Lihatnya untuk footprint dan pedoman perpindahan paruh.

Diamant diagram pakai pakai rkm untuk TUSB7340RKMR

Tidak ada data diatribut pin yang tersedia untuk TUSB7340RKMR.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

TUSB7340RKMR cocok untuk 6 aplikasis: Embedded USB Port Expansion, Industrial Data Acquisition, USB Test and Measurement, Set-Top and Media Systems, Portable Measurement Instruments, Secure USB Gateways.

🖥️

Embedded USB Port Expansion

The TUSB7340RKMR fits embedded platforms that need four external USB ports without routing four independent host interfaces into the processor. It connects to the host system through PCIe x1 Gen 2 and presents an xHCI-based downstream interface supporting SuperSpeed, high-speed, full-speed, and low-speed devices. A system designer can therefore combine USB storage, keyboards, diagnostics, and service interfaces behind one controller. The main design consideration is host-driver validation: firmware and operating-system support must exercise enumeration, suspend, resume, hot-plug, and power-management behavior for the intended USB device mix.

🏭

Industrial Data Acquisition

The TUSB7340RKMR is appropriate for industrial data-acquisition equipment that must connect several USB instruments or peripherals to one PCIe-capable embedded computer. Four downstream ports reduce the number of internal USB routing paths, while backward-compatible support for USB 2.0 speeds allows the same controller to serve legacy and SuperSpeed devices. In a factory enclosure, validate thermal rise, conducted emissions, and USB connection stability across the required cable lengths. The identified 0 °C to 70 °C range must remain within the enclosure temperature envelope, and the exposed pad should be tied to the system ground plane through the prescribed thermal-via pattern.

🔧

USB Test and Measurement

The TUSB7340RKMR can serve as the host-side interface in automated test equipment that must cycle through multiple USB-connected instruments. Four downstream ports allow a single embedded host to manage parallel devices while the PCIe x1 Gen 2 link handles xHCI traffic. Test-system engineers should include margin for enumeration delay, hot-plug events, device-specific power requirements, and sustained SuperSpeed transfers. Cable and fixture selection also matters because connector loss and electromagnetic interference can affect margin even when the controller itself operates correctly. Firmware should report port-state changes promptly so the test sequencer can distinguish a device failure from a link or enumeration failure.

📺

Set-Top and Media Systems

The TUSB7340RKMR is suitable for set-top, media, and peripheral-compute systems that expose several USB connections to storage, networking, service, or control accessories. Its four-port xHCI topology supports modern SuperSpeed devices while retaining compatibility with USB 2.0 accessories. Placing the controller behind a PCIe interface also allows the host processor to use a common driver model rather than implementing four independent host controllers. Design reviews should address port power management, boot-device priority, device-tree or firmware updates, and the heat generated during sustained data transfers. The WQFN exposed pad must connect to a low-impedance thermal and ground structure to maintain stable operation.

📱

Portable Measurement Instruments

The TUSB7340RKMR can support portable measurement instruments that expose multiple USB device connections to a host computer for control, data capture, or configuration. Four downstream ports are useful when users attach probes, memory devices, calibration tools, and network adapters over a single controller. A portable enclosure places additional emphasis on power efficiency, board area, connector heat, and thermal management. The controller's 1.1 V and 3.3 V domains should be generated with low-noise, independently monitored rails, while system firmware should support orderly port power-up to avoid stressing attached devices. Mechanical shock and temperature testing should be performed with the final enclosure and cable set.

🛡️

Secure USB Gateways

The TUSB7340RKMR fits USB gateways that mediate connections between external peripherals and an embedded or industrial host. Four ports permit segmented device access, while xHCI provides a standard command interface for enumeration, power control, and status reporting. A gateway design should define port-disable policies, operating-system device filtering, and recovery behavior for malformed or repeatedly failing devices. Because the controller supports multiple USB speeds, validation should include SuperSpeed, high-speed, full-speed, and low-speed attachments rather than testing only modern external drives. Maintain continuous ground-plane continuity beneath the differential pairs and keep the exposed-pad thermal-via field clear of high-impedance routing.

What is the TUSB7340RKMR?
The TUSB7340RKMR is a Texas Instruments four-port USB 3.0 xHCI host controller with a PCIe x1 Gen 2 host interface. According to the Texas Instruments TUSB7340 product page, it supports SuperSpeed, high-speed, full-speed, and low-speed downstream USB connections. The controller is packaged in a 100-pin RKM WQFN with an exposed thermal pad and uses 1.1 V and 3.3 V supply rails.
How many USB ports does TUSB7340RKMR support?
The TUSB7340RKMR supports up to four downstream USB ports. The Texas Instruments TUSB7340 product page identifies it as a SuperSpeed USB 3.0 four-port xHCI host controller, while the TUSB7340 evaluation model guide describes support for SuperSpeed, high-speed, full-speed, and low-speed connections. The four-port topology is its principal distinction from the related two-port TUSB7320.
What interface does TUSB7340RKMR use to communicate with the host processor?
The TUSB7340RKMR communicates with the host processor through a PCIe x1 Gen 2 interface. The TUSB7340 evaluation model user guide identifies PCIe x1 Gen 2 as the host-system connection. This interface carries xHCI register, command, status, and data traffic between the external USB ports and the processor's PCIe-based host-controller driver.
What is the package and pin count of TUSB7340RKMR?
The TUSB7340RKMR uses a 100-pin RKM WQFN exposed-pad package measuring 9 x 9 mm. Texas Instruments describes the RKM package as pin-compatible across the relevant TUSB73x0 family members. For PCB layout, use the manufacturer land pattern and thermal-via recommendation rather than treating it as a generic 100-pin QFN footprint.
Where can I download the TUSB7340RKMR datasheet PDF?
The official TUSB7340 datasheet PDF is available from Texas Instruments at https://www.ti.com/lit/ds/symlink/tusb7340.pdf. It contains the detailed RKM pin assignments, electrical characteristics, PCIe and USB interface requirements, power sequencing, and application information needed for schematic capture and PCB design. The manufacturer product page at https://www.ti.com/product/TUSB7340 provides the related ordering and support information.
Where can I find the TUSB7340RKMR pinout?
The TUSB7340RKMR pinout is documented in the pin-configuration tables of the official Texas Instruments TUSB7340 datasheet. The device has 100 pins in the RKM WQFN package and includes an exposed thermal pad, so the pad and its thermal-via pattern must be treated separately from the numbered perimeter pins. Use the datasheet pin table when assigning power, ground, PCIe, USB, clock, configuration, and control signals.
TUSB7340RKMR vs TUSB7320RKMR: which is better for a four-port design?
The TUSB7340RKMR is the better choice for a four-port design because it supports up to four downstream ports, while the TUSB7320 supports up to two. Both devices use the pin-compatible 100-pin RKM package and a PCIe x1 Gen 2 host interface according to Texas Instruments. The decision should also consider firmware and validation requirements, because reducing the TUSB7340 from four ports to two changes the supported system topology rather than merely changing a price grade.
What is the difference between TUSB7340RKMR and TUSB7340IRKMR?
The TUSB7340RKMR and TUSB7340IRKMR are closely related Texas Instruments orderable variants in the same USB 3.0 host-controller family and 100-pin RKM package. The comparison listings describe their primary performance characteristics and terminals as consistent, while temperature-grade and ordering details must be checked against the manufacturer ordering table. Confirm the exact temperature range and suffix meaning against the datasheet before substituting one order code for the other.
When should I choose TUSB7340RKMR instead of TUSB7320RKMR?
Choose the TUSB7340RKMR when the system requires up to four downstream USB ports or a shared four-port xHCI topology. Choose the TUSB7320RKMR when two ports are sufficient and validation can be performed for the smaller port count. Both use the same 100-pin RKM family and PCIe x1 Gen 2 host connection, but firmware, enumeration, power-management, and device-validation work should match the selected controller.
Is TUSB7340RKMR suitable for industrial and embedded USB expansion?
The TUSB7340RKMR is suitable for embedded USB expansion designs that use a PCIe-capable host processor and require four downstream USB ports. Its xHCI architecture supports SuperSpeed and legacy USB speeds, while the 1.1 V and 3.3 V rails accommodate internal controller power domains. For an industrial deployment, verify the stated 0 °C to 70 °C operating range against the enclosure temperature and consider a wider-temperature device when required.
What can replace TUSB7340RKMR?
TUSB7340IRKMR is the closest identified pin-compatible alternative, but it should be treated as a controlled substitution because ordering and temperature details must be confirmed. The related TUSB7320RKMR and TUSB7320IRKMR use the same 100-pin RKM package and are listed as compatible, although the TUSB7320 supports only two downstream ports. No cross-brand drop-in replacement was established from the available technical information.
Is there a best Texas Instruments equivalent for TUSB7340RKMR?
The closest Texas Instruments equivalent identified is TUSB7340IRKMR because it belongs to the same four-port TUSB7340 family and uses the same 100-pin RKM package. The TUSB7320 variants are hardware-compatible alternatives but reduce the maximum downstream-port count from four to two. No verified cross-manufacturer part with the required package and interface alignment was identified, so an unrestricted cross-brand substitution is not recommended.
Where can I buy TUSB7340RKMR and what is its current price?
Use the Request a Quote form on this page to ask for the current TUSB7340RKMR price, stock status, minimum order quantity, and lead time. The part is listed by Texas Instruments as a TUSB7340 four-port USB 3.0 xHCI host controller, and ordering availability can change. A request through this page avoids relying on a stale historical listing when planning production procurement.
How long is the lead time for TUSB7340RKMR?
The current lead time for TUSB7340RKMR should be requested through the Request a Quote form on this page with the required quantity and shipment date. Lead time can vary with order volume, component availability, and manufacturing conditions. For production planning, include the requested annual usage, scheduled build dates, and approved alternative policy so the supplier can confirm a realistic allocation horizon.
Is TUSB7340RKMR in stock?
Current TUSB7340RKMR inventory should be confirmed through the Request a Quote form on this page. The manufacturer product page supports the TUSB7340RKMR ordering configuration, but real-time channel inventory changes independently of that status. When requesting a quote, specify the required quantity, date code requirements, target delivery date, and whether partial shipment is acceptable.
What are the key specifications of TUSB7340RKMR that engineers should know?
The key TUSB7340RKMR specifications are four downstream USB ports, USB 3.0 SuperSpeed support, a PCIe x1 Gen 2 host interface, USB 2.0 backward-compatible device speeds, and 1.1 V plus 3.3 V supply rails. The Texas Instruments RKM package contains 100 pins in a 9 x 9 mm surface-mount outline with an exposed thermal pad. The operating range identified for this ordering configuration is 0 °C to 70 °C.
What power and PCB considerations apply to TUSB7340RKMR?
TUSB7340RKMR requires correct sequencing and decoupling for its 1.1 V and 3.3 V supply domains, plus effective thermal management for the exposed pad. Place bypass capacitors close to the relevant supply pins, provide a low-impedance ground reference, and use a dense exposed-pad via array sized to the manufacturer's land pattern. Preserve PCIe and USB SuperSpeed return-path continuity to minimize signal-integrity problems during high-speed traffic.

Data referensi engineering untuk TUSB7340RKMR — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose TUSB7340RKMR when the host system requires a four-port USB 3.0 xHCI controller and its operating range of 0 °C to 70 °C satisfies the design. Prefer TUSB7340IRKMR when the same four-port function and RKM footprint are needed over a wider -40 °C to 85 °C temperature range, after confirming the exact ordering suffix and qualification status. TUSB7320RKMR is appropriate only when two downstream ports are sufficient and reducing the topology from four ports to two is acceptable. TUSB7320IRKMR offers the same two-port limitation with a wider identified temperature range. All listed alternatives use the 100-pin RKM package, but package identity alone does not preserve firmware assumptions, port validation, or connector requirements. Revalidate PCIe enumeration, USB hot-plug behavior, power sequencing, and signal integrity whenever an approved alternative is used.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini TUSB7340IRKMR TUSB7320RKMR TUSB7320IRKMR
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 100-pin WQFN exposed-pad package, RKM, 9 x 9 mm 100-pin WQFN exposed-pad package, RKM, 9 x 9 mm 100-pin WQFN exposed-pad package, RKM, 9 x 9 mm 100-pin WQFN exposed-pad package, RKM, 9 x 9 mm
Maximum Downstream Ports 4 ports 4 ports 2 ports, 50% fewer than TUSB7340RKMR 2 ports, 50% fewer than TUSB7340RKMR
Host Interface PCIe x1 Gen 2 PCIe x1 Gen 2 PCIe x1 Gen 2 PCIe x1 Gen 2
USB Version USB 3.0 USB 3.0 USB 3.0 USB 3.0
Supported Downstream Speeds SuperSpeed, high-speed, full-speed, and low-speed SuperSpeed, high-speed, full-speed, and low-speed SuperSpeed, high-speed, full-speed, and low-speed SuperSpeed, high-speed, full-speed, and low-speed
Supply Voltage 1.1 V and 3.3 V 1.1 V and 3.3 V 1.1 V and 3.3 V 1.1 V and 3.3 V
Pin Count 100 pins 100 pins 100 pins 100 pins
Controller Family TUSB7340 four-port xHCI host controller TUSB7340 four-port xHCI host controller TUSB7320 two-port xHCI host controller TUSB7320 two-port xHCI host controller

Diferensiator Kunci

  • Twice the downstream-port capacity of the TUSB7320 alternatives (vsTUSB7320RKMR)
  • Preserves the same four-port controller topology as the closest TUSB7340 alternative (vsTUSB7340IRKMR)
  • Broader port expansion without changing the host-interface architecture (vsTUSB7320IRKMR)

Catatan Desain

Use the Texas Instruments RKM land pattern and exposed-pad via field rather than a generic 100-pin QFN footprint. Connect the exposed pad to the ground plane with the number and spacing of thermal vias specified in the manufacturer design guidance. Preserve uninterrupted reference planes beneath the PCIe and USB differential pairs, and route high-speed signals away from switching-regulator switches, inductors, and connector-return discontinuities.

Provide separate 1.1 V and 3.3 V rails with local high-frequency bypass capacitors placed close to their supply pins. Follow the datasheet's permitted sequencing and ramp requirements to avoid abnormal internal states. Verify steady-state and transient voltage at the controller pins, especially while USB devices start, because large inrush events can interact with the host power supply and produce xHCI link or enumeration errors.

Thermal performance depends on the exposed pad, copper area, via field, board construction, and enclosure airflow. Use the manufacturer junction-temperature and thermal-resistance information to calculate the worst-case rise, and avoid placing the controller above a heat-generating component that prevents heat from reaching the underside of the package. Validate sustained SuperSpeed transfers because controller activity and attached-device power draw can raise board temperature.

Treat PCIe, USB 3.0 SuperSpeed, and USB 2.0 differential routes as controlled-impedance signals. Follow the datasheet's layer-transition and reference-plane guidance, avoid stubs, and maintain symmetry between the positive and negative conductors. Connector and cable losses should be included in link-margin analysis; a successful board simulation does not replace validation with the intended cable length, enclosure, and peripheral set.

Do not substitute a two-port TUSB7320 solely because it uses the same RKM footprint; the TUSB7340 supports four downstream ports while the TUSB7320 supports two. Also confirm ordering suffix, temperature grade, firmware support, and exposed-pad layout before approving any substitution. Changes in port count can alter power sequencing, enumeration expectations, test procedures, and the external connector implementation.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

Compliance attributes were not stated in the retrieved product and listing information. The interface controller is not inherently an automotive-qualified device; verify AEC-Q100 status only for an explicitly qualified ordering variant.

Pencarian Terkait

TUSB7340RKMR datasheet TUSB7340RKMR datasheet pdf TUSB7340RKMR pinout TUSB7340RKMR pin configuration TUSB7340RKMR USB 3.0 host controller TUSB7340RKMR PCIe x1 Gen 2 TUSB7340RKMR RKM package TUSB7340RKMR equivalent TUSB7340RKMR drop-in replacement TUSB7340RKMR vs TUSB7320RKMR TUSB7340RKMR price TUSB7340RKMR stock Texas Instruments TUSB7340RKMR TUSB7340 four-port xHCI controller

Komponen dan Istilah Terkait

Texas Instruments TUSB7340RKMR TUSB7340IRKMR TUSB7320RKMR TUSB7320IRKMR USB 3.0 USB 2.0 xHCI USB host controller PCIe x1 Gen 2 SuperSpeed four-port host controller interface IC USB interface RKM package 100-pin WQFN exposed thermal pad surface-mount package 1.1 V power rail 3.3 V power rail embedded USB expansion industrial data acquisition USB test equipment PCIe signal integrity USB hot-plug
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ