TUSB7340RKMR - 4-Port USB 3.0 xHCI Host Controller | TI
MPN: TUSB7340RKMR ✓ פעילTUSB7340RKMR סקירה
An xHCI host controller is a type of USB interface controller used within the broader hierarchy of interface ICs, USB host controllers, and computer interface semiconductors. It centralizes host-side USB transaction handling, port management, and command scheduling in systems that need to manage multiple external USB devices through one host interface. The TUSB7340 is intended for embedded systems, industrial equipment, test systems, and other designs that need more than a conventional two-port host controller.
The principal feature of the TUSB7340RKMR is support for up to four downstream USB ports. According to the Texas Instruments TUSB7340 product page, the device is a SuperSpeed USB 3.0 four-port xHCI host controller. Its host-system interface is PCIe x1 Gen 2, allowing the controller to communicate with a host processor over a high-speed serial link. The device also supports USB 2.0 device speeds, providing backward compatibility for devices that do not operate at SuperSpeed.
The TUSB7340 uses a 100-pin RKM WQFN package with an exposed thermal pad and operates from low-level 1.1 V and 3.3 V supplies identified in the manufacturer documentation. This split-supply arrangement supports low-power and high-speed sections of the controller. Thermal performance depends on effective copper area under the exposed pad, PCB layer count, airflow, and the total power dissipated by the controller during link training and USB traffic.
Typical applications include embedded computing platforms, industrial test equipment, set-top and media systems, data-acquisition systems, and external USB port expanders. In each case, the controller provides a standardized way for a PCIe-capable host processor to manage up to four USB downstream ports. System firmware must provide xHCI initialization, device enumeration, power management, and driver support through the host operating system.
PCB implementation should prioritize the exposed-pad connection, PCIe signal integrity, and USB SuperSpeed routing. Place the exposed pad on a solid thermal and ground plane, use a continuous via field where appropriate, and follow the reference-plane and length-matching guidance in the manufacturer datasheet. Keep high-speed differential routes away from noisy power-conversion nodes.
This product page combines manufacturer interface details, ordering information, packaging constraints, and engineering guidance into a focused selection reference. It also distinguishes genuine pin-compatible alternatives from parts that merely share a generic controller category, helping engineers assess whether a substitution preserves USB topology, PCIe connectivity, electrical rails, and the 100-pin RKM land pattern.
חלופות תחליף ישיר עבור TUSB7340RKMR — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם TUSB7340RKMR (אותו גורם צורה וטביעת רגל) — שונים ב Package, RoHS Status, Operating Temperature, Technology, Battery Charging Support.
TUSB7340IRKMR
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
TUSB7320RKMR
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←TUSB7320IRKMR
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
TUSB7340RKMR מפרטים
| Device Type | USB 3.0 xHCI host controller |
| Maximum Downstream Ports | 4 ports |
| USB Interface | USB 3.0 SuperSpeed with USB 2.0 backward compatibility |
| Supported USB Speeds | SuperSpeed, high-speed, full-speed, and low-speed |
| Host Interface | PCIe x1 Gen 2 |
| PCIe Interface Width | x1 |
| PCIe Interface Generation | Gen 2 |
| Low-Voltage Supply | 1.1 V |
| Main Supply | 3.3 V |
| מארז | 100-pin WQFN exposed-pad package, 9 x 9 mm |
| Package Designation | RKM |
| מספר פינים | 100 pins |
| סוג הרכבה | Surface mount |
| טמפרטורת פעולה | 0 °C to 70 °C |
| Technology | CMOS |
| xHCI Compliance | USB 3.0 xHCI, revision 0.96 |
מדריך תצורת פינים של TUSB7340RKMR rkm
תצורת פינים עבור TUSB7340RKMR (מארזת rkm). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.
אין נתוני פריסת פינים מפורטים עבור TUSB7340RKMR.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
TUSB7340RKMR מתאים עבור 6 יישוםs: Embedded USB Port Expansion, Industrial Data Acquisition, USB Test and Measurement, Set-Top and Media Systems, Portable Measurement Instruments, Secure USB Gateways.
Embedded USB Port Expansion
The TUSB7340RKMR fits embedded platforms that need four external USB ports without routing four independent host interfaces into the processor. It connects to the host system through PCIe x1 Gen 2 and presents an xHCI-based downstream interface supporting SuperSpeed, high-speed, full-speed, and low-speed devices. A system designer can therefore combine USB storage, keyboards, diagnostics, and service interfaces behind one controller. The main design consideration is host-driver validation: firmware and operating-system support must exercise enumeration, suspend, resume, hot-plug, and power-management behavior for the intended USB device mix.
מומלץ
Industrial Data Acquisition
The TUSB7340RKMR is appropriate for industrial data-acquisition equipment that must connect several USB instruments or peripherals to one PCIe-capable embedded computer. Four downstream ports reduce the number of internal USB routing paths, while backward-compatible support for USB 2.0 speeds allows the same controller to serve legacy and SuperSpeed devices. In a factory enclosure, validate thermal rise, conducted emissions, and USB connection stability across the required cable lengths. The identified 0 °C to 70 °C range must remain within the enclosure temperature envelope, and the exposed pad should be tied to the system ground plane through the prescribed thermal-via pattern.
מומלץ
USB Test and Measurement
The TUSB7340RKMR can serve as the host-side interface in automated test equipment that must cycle through multiple USB-connected instruments. Four downstream ports allow a single embedded host to manage parallel devices while the PCIe x1 Gen 2 link handles xHCI traffic. Test-system engineers should include margin for enumeration delay, hot-plug events, device-specific power requirements, and sustained SuperSpeed transfers. Cable and fixture selection also matters because connector loss and electromagnetic interference can affect margin even when the controller itself operates correctly. Firmware should report port-state changes promptly so the test sequencer can distinguish a device failure from a link or enumeration failure.
מומלץ
Set-Top and Media Systems
The TUSB7340RKMR is suitable for set-top, media, and peripheral-compute systems that expose several USB connections to storage, networking, service, or control accessories. Its four-port xHCI topology supports modern SuperSpeed devices while retaining compatibility with USB 2.0 accessories. Placing the controller behind a PCIe interface also allows the host processor to use a common driver model rather than implementing four independent host controllers. Design reviews should address port power management, boot-device priority, device-tree or firmware updates, and the heat generated during sustained data transfers. The WQFN exposed pad must connect to a low-impedance thermal and ground structure to maintain stable operation.
מומלץ
Portable Measurement Instruments
The TUSB7340RKMR can support portable measurement instruments that expose multiple USB device connections to a host computer for control, data capture, or configuration. Four downstream ports are useful when users attach probes, memory devices, calibration tools, and network adapters over a single controller. A portable enclosure places additional emphasis on power efficiency, board area, connector heat, and thermal management. The controller's 1.1 V and 3.3 V domains should be generated with low-noise, independently monitored rails, while system firmware should support orderly port power-up to avoid stressing attached devices. Mechanical shock and temperature testing should be performed with the final enclosure and cable set.
מומלץ
Secure USB Gateways
The TUSB7340RKMR fits USB gateways that mediate connections between external peripherals and an embedded or industrial host. Four ports permit segmented device access, while xHCI provides a standard command interface for enumeration, power control, and status reporting. A gateway design should define port-disable policies, operating-system device filtering, and recovery behavior for malformed or repeatedly failing devices. Because the controller supports multiple USB speeds, validation should include SuperSpeed, high-speed, full-speed, and low-speed attachments rather than testing only modern external drives. Maintain continuous ground-plane continuity beneath the differential pairs and keep the exposed-pad thermal-via field clear of high-impedance routing.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור TUSB7340RKMR — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | TUSB7340IRKMR | TUSB7320RKMR | TUSB7320IRKMR |
|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 100-pin WQFN exposed-pad package, RKM, 9 x 9 mm | 100-pin WQFN exposed-pad package, RKM, 9 x 9 mm | 100-pin WQFN exposed-pad package, RKM, 9 x 9 mm | 100-pin WQFN exposed-pad package, RKM, 9 x 9 mm |
| Maximum Downstream Ports | 4 ports | 4 ports | 2 ports, 50% fewer than TUSB7340RKMR | 2 ports, 50% fewer than TUSB7340RKMR |
| Host Interface | PCIe x1 Gen 2 | PCIe x1 Gen 2 | PCIe x1 Gen 2 | PCIe x1 Gen 2 |
| USB Version | USB 3.0 | USB 3.0 | USB 3.0 | USB 3.0 |
| Supported Downstream Speeds | SuperSpeed, high-speed, full-speed, and low-speed | SuperSpeed, high-speed, full-speed, and low-speed | SuperSpeed, high-speed, full-speed, and low-speed | SuperSpeed, high-speed, full-speed, and low-speed |
| Supply Voltage | 1.1 V and 3.3 V | 1.1 V and 3.3 V | 1.1 V and 3.3 V | 1.1 V and 3.3 V |
| Pin Count | 100 pins | 100 pins | 100 pins | 100 pins |
| Controller Family | TUSB7340 four-port xHCI host controller | TUSB7340 four-port xHCI host controller | TUSB7320 two-port xHCI host controller | TUSB7320 two-port xHCI host controller |
מבדילים עיקריים
- Twice the downstream-port capacity of the TUSB7320 alternatives (לעומתTUSB7320RKMR)
- Preserves the same four-port controller topology as the closest TUSB7340 alternative (לעומתTUSB7340IRKMR)
- Broader port expansion without changing the host-interface architecture (לעומתTUSB7320IRKMR)
הערות תכנון
Use the Texas Instruments RKM land pattern and exposed-pad via field rather than a generic 100-pin QFN footprint. Connect the exposed pad to the ground plane with the number and spacing of thermal vias specified in the manufacturer design guidance. Preserve uninterrupted reference planes beneath the PCIe and USB differential pairs, and route high-speed signals away from switching-regulator switches, inductors, and connector-return discontinuities.
Provide separate 1.1 V and 3.3 V rails with local high-frequency bypass capacitors placed close to their supply pins. Follow the datasheet's permitted sequencing and ramp requirements to avoid abnormal internal states. Verify steady-state and transient voltage at the controller pins, especially while USB devices start, because large inrush events can interact with the host power supply and produce xHCI link or enumeration errors.
Thermal performance depends on the exposed pad, copper area, via field, board construction, and enclosure airflow. Use the manufacturer junction-temperature and thermal-resistance information to calculate the worst-case rise, and avoid placing the controller above a heat-generating component that prevents heat from reaching the underside of the package. Validate sustained SuperSpeed transfers because controller activity and attached-device power draw can raise board temperature.
Treat PCIe, USB 3.0 SuperSpeed, and USB 2.0 differential routes as controlled-impedance signals. Follow the datasheet's layer-transition and reference-plane guidance, avoid stubs, and maintain symmetry between the positive and negative conductors. Connector and cable losses should be included in link-margin analysis; a successful board simulation does not replace validation with the intended cable length, enclosure, and peripheral set.
Do not substitute a two-port TUSB7320 solely because it uses the same RKM footprint; the TUSB7340 supports four downstream ports while the TUSB7320 supports two. Also confirm ordering suffix, temperature grade, firmware support, and exposed-pad layout before approving any substitution. Changes in port count can alter power sequencing, enumeration expectations, test procedures, and the external connector implementation.
מידע על תאימות
Compliance attributes were not stated in the retrieved product and listing information. The interface controller is not inherently an automotive-qualified device; verify AEC-Q100 status only for an explicitly qualified ordering variant.