Texas Instruments

TUSB8042RGCT - 4-Port USB 3.1 Hub | Texas Instruments

MPN: TUSB8042RGCT ✓ Aktif
64-pin VQFN Package plus or minus 100 ppm or better Speed
MOQ: 1 |

TUSB8042RGCT Ringkasan

The Texas Instruments TUSB8042RGCT is a four-port SuperSpeed USB 3.1 Gen 1 hub controller supporting data rates up to 5.0 Gbps. It is packaged in a 64-pin VQFN package measuring 9 mm by 9 mm and provides GPIO, I2C, and SMBus interfaces for configuration, monitoring, and peripheral connectivity. The controller consolidates one USB host connection into four downstream ports for systems that require expanded USB connectivity without using multiple independent host controllers.

A USB hub controller is an interface integrated circuit within the USB interface IC hierarchy. Its role is to manage traffic between an upstream USB host and multiple downstream ports while providing the electrical and protocol functions required for USB SuperSpeed operation. Unlike a passive USB splitter, a hub controller contains active logic for enumerating devices, managing port events, and coordinating data transfers across the hub.

The TUSB8042RGCT provides four SuperSpeed downstream ports and a 5.0 Gbps maximum data rate. Its GPIO, I2C, and SMBus interfaces support configuration and control functions beyond basic USB signaling. These interfaces can assist with port-status monitoring, programmable control logic, and system-level management. The manufacturer datasheet also identifies a reference-clock requirement for designs using an external clock source.

The clock source requires frequency stability of plus or minus 100 ppm or better. It must also have less than 50 ps absolute peak-to-peak jitter, or less than 25 ps peak-to-peak jitter after applying the USB 3.1 jitter transfer function. These requirements are important because reference-clock instability can reduce margin for eye closure, timing compliance, and reliable enumeration across all four ports.

Typical uses include industrial USB equipment, test and measurement systems, peripheral expansion, embedded computing platforms, and docking systems. In these applications, the controller allows one upstream SuperSpeed USB link to serve multiple downstream peripherals while preserving a single controlled hub function. The I2C and SMBus connections also complement USB devices that require configuration or supervisory access outside the USB protocol.

PCB implementation should follow the manufacturer’s VQFN land pattern and high-speed layout guidance. The 64-pin VQFN package requires careful thermal-pad connection, short differential routing, and continuous reference planes. Power and ground distribution must also support the simultaneous operation of the upstream port and four downstream SuperSpeed ports without introducing unacceptable signal degradation.

This product page combines the exact ordering information, package details, interface capabilities, and clock constraints into an engineering-focused guide. It also distinguishes the confirmed TUSB8042RGCT ordering variant from the limited drop-in alternatives supported by manufacturer and cross-reference information.

Alternatif penggantian untuk TUSB8042RGCT — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian TUSB8042RGCT (sama faktor bentuk dan footprint).

TUSB8042RGCR

✅ Drop-In
Texas Instruments
📦 64-pin VQFN (RGC)
4-Port SuperSpeed USB 3.1 Hub Controller · 4 downstream ports · 5.0 Gbps · USB 3.1, USB 2.0, and USB 1.1 · 5.0 Gbps · 64-pin VQFN (RGC), 9 x 9 mm · 64 pins · 0°C to 70°C

Kontak untuk harga

Lihat Datasheet →

TUSB8042RGCT Spesifikasi

Product Type USB 3.1 SuperSpeed hub controller
Number of Downstream Ports 4 ports
Maximum Data Rate 5.0 Gbps
USB Version USB 3.1 Gen 1
Upstream Port Count 1 port
General-Purpose I/O Interface GPIO
Serial Interface I2C and SMBus
Reference Clock Frequency Stability plus or minus 100 ppm or better
External Clock Absolute Peak-to-Peak Jitter less than 50 ps
External Clock Jitter After USB Transfer Function less than 25 ps peak-to-peak
Package Type 64-pin VQFN
Package Dimensions 9 mm x 9 mm
Tipe Mounting Surface mount
Maximum USB Link Data Rate 5.0 Gbps per SuperSpeed link

TUSB8042RGCT 9 mm x 9 mm Diamant Konfigurasi Panduan

Konfigurasi pin untuk TUSB8042RGCT (9 mm x 9 mm pakai pakai). Penomoran pin, fungsi, dan diagram koneksi ditetapkan dalam datasheet produsen. Lihatnya untuk footprint dan pedoman perpindahan paruh.

Diamant diagram pakai pakai 9 mm x 9 mm untuk TUSB8042RGCT

Tidak ada data diatribut pin yang tersedia untuk TUSB8042RGCT.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

TUSB8042RGCT cocok untuk 6 aplikasis: Industrial USB Data Acquisition, Test and Measurement Systems, Embedded Peripheral Expansion, USB Docking Stations, Communications and Network Equipment, Security and Surveillance Systems.

🏭

Industrial USB Data Acquisition

The TUSB8042RGCT fits industrial data-acquisition equipment that must connect several USB instruments to one host controller. Its four downstream SuperSpeed ports provide a common 5.0 Gbps-class interface for peripherals, while GPIO, I2C, and SMBus provide paths for supervisory control and status reporting outside the USB protocol. Place the hub controller between the host connection and the four peripheral ports, then validate signal integrity with the manufacturer differential-pair layout guidance. The principal design consideration is maintaining a continuous ground reference and symmetric routing across the dense 64-pin VQFN footprint.

🔧

Test and Measurement Systems

A test and measurement chassis can use the TUSB8042RGCT to consolidate four USB peripherals behind one upstream host link. The controller supports four USB 3.1 Gen 1 downstream ports with rates up to 5.0 Gbps, matching the high-throughput needs of data loggers, instruments, and automated test equipment. GPIO may assist with peripheral-control signaling, while I2C and SMBus can support configuration or monitoring functions in the enclosure. Designers should follow the manufacturer’s 9 mm by 9 mm VQFN land pattern and ensure that power, reference clock, and differential routing meet the published timing and layout constraints.

🖥️

Embedded Peripheral Expansion

The TUSB8042RGCT is suitable for embedded platforms that need to expand one host USB connection into four downstream ports. Its four-port SuperSpeed architecture avoids implementing four independent hub functions, while the 5.0 Gbps USB 3.1 Gen 1 rate supports high-volume data movement. GPIO, I2C, and SMBus add configuration paths for board-level monitoring. In a compact embedded design, thermal-pad connection and uninterrupted return paths are essential; use the manufacturer’s package drawing and reference layout to maintain signal and thermal performance.

🔌

USB Docking Stations

The TUSB8042RGCT can form the central hub function in a docking station intended to connect storage, network, input, and display-adjacent USB devices. Four downstream SuperSpeed ports allow a single upstream host connection to serve multiple peripheral categories at rates up to 5.0 Gbps. Its I2C and SMBus interfaces can support dock-level configuration and supervisory functions, while GPIO can expose status or control signals. The 64-pin VQFN demands careful escape routing for all USB pairs, and the external reference clock must satisfy the manufacturer’s plus or minus 100 ppm stability and jitter requirements.

🌐

Communications and Network Equipment

The TUSB8042RGCT is appropriate for communications equipment that uses USB as a service, configuration, or expansion interface. Four downstream ports provide flexible connectivity for diagnostic tools, memory devices, and control peripherals, while the 5.0 Gbps SuperSpeed rate supports burst-heavy workloads. The integrated GPIO, I2C, and SMBus interfaces give the system additional avenues for board-level monitoring and configuration. Layout should minimize discontinuities and crosstalk on USB differential pairs, and the clock source should be positioned to avoid unnecessary noise coupling into the controller and its reference network.

🎥

Security and Surveillance Systems

A surveillance controller or edge-recording enclosure can use the TUSB8042RGCT to connect USB storage and auxiliary devices without consuming multiple host-controller resources. Four SuperSpeed downstream ports support data-intensive storage and peripheral connections at up to 5.0 Gbps, while GPIO and SMBus can assist with board-level status functions. The compact 64-pin VQFN package fits space-constrained electronics but requires careful exposed-pad and thermal management. Follow the manufacturer layout recommendation for USB signal pairs and provide a stable reference clock within the specified frequency and jitter limits.

What is the TUSB8042RGCT?
The TUSB8042RGCT is a four-port USB 3.1 Gen 1 SuperSpeed hub controller from Texas Instruments. According to the manufacturer product page, it supports links operating up to 5.0 Gbps and is housed in a 64-pin VQFN package. The controller also provides GPIO, I2C, and SMBus interfaces for configuration, status monitoring, and system-level control.
How many USB ports does TUSB8042RGCT support?
The TUSB8042RGCT provides four downstream SuperSpeed USB ports in addition to its upstream host connection. According to the Texas Instruments manufacturer datasheet, this arrangement allows one upstream USB connection to serve four downstream peripherals. The device supports USB 3.1 Gen 1 operation at data rates up to 5.0 Gbps.
What is the maximum data rate of TUSB8042RGCT?
The TUSB8042RGCT supports a maximum SuperSpeed data rate of 5.0 Gbps. This value identifies the device as a USB 3.1 Gen 1 hub controller rather than a higher-generation USB product. The maximum rate applies to the supported USB 3.1 Gen 1 signaling defined by Texas Instruments for the TUSB8042 family.
What package does TUSB8042RGCT use?
The TUSB8042RGCT uses a 64-pin VQFN package measuring 9 mm by 9 mm. The manufacturer part-details listing identifies the RGC package designation, while the distributor listing describes the device as a 64-VQFN. Its exposed thermal pad and dense lead arrangement require the land pattern and layout recommendations in the manufacturer datasheet.
Which control interfaces are available on TUSB8042RGCT?
The TUSB8042RGCT includes GPIO, I2C, and SMBus interfaces. According to the Texas Instruments product information, these interfaces supplement the USB hub function by enabling configuration, status handling, and supervisory communication with system logic. The exact electrical implementation and pin assignment should be confirmed from the package pin-description table before PCB routing.
What clock requirements apply to TUSB8042RGCT?
An external reference clock should have stability of plus or minus 100 ppm or better and less than 50 ps absolute peak-to-peak jitter. According to the manufacturer datasheet, it may alternatively use less than 25 ps peak-to-peak jitter after applying the USB 3.1 jitter transfer function. These limits preserve timing margin for SuperSpeed signal integrity and reliable device operation.
Where can I download the TUSB8042RGCT datasheet PDF?
The official TUSB8042 datasheet PDF is available from the Texas Instruments literature link at https://www.ti.com/lit/gpn/TUSB8042. The document provides the electrical characteristics, reference-clock requirements, application information, package details, and PCB guidance needed for design review. The manufacturer product page at https://www.ti.com/product/TUSB8042 provides the related ordering and support information.
Where can I find the TUSB8042RGCT pinout?
The pinout should be taken from the pin-description table in the official Texas Instruments TUSB8042 datasheet. The TUSB8042RGCT uses a 64-pin VQFN package, so all 64 positions, including power, ground, USB differential pairs, configuration pins, and exposed-pad connections must be checked during schematic review. Use the manufacturer package drawing and land pattern rather than relying on an unverified third-party diagram.
What can replace the TUSB8042RGCT?
The TUSB8042RGCR is the directly confirmed drop-in option for the TUSB8042RGCT. A cross-reference comparison identifies the two devices as having consistent performance characteristics, terminals, and packages, allowing replacement without circuit modification. The ordering code differs, but the confirmed electrical configuration is the same four-port, 5.0 Gbps SuperSpeed hub controller in a 64-pin VQFN package.
Is the TUSB8042RGCR the same as the TUSB8042RGCT?
The TUSB8042RGCR is a confirmed drop-in replacement for the TUSB8042RGCT. Both use the same 64-pin VQFN configuration and provide the same core four-port USB 3.1 Gen 1 hub function at up to 5.0 Gbps. The ordering suffix differs, so procurement should verify the required mechanical and delivery configuration before substituting one item number for the other.
When should I choose TUSB8042RGCT instead of another USB hub controller?
Choose the TUSB8042RGCT when the design needs a four-port USB 3.1 Gen 1 hub with 5.0 Gbps operation, GPIO, I2C, and SMBus support in a 64-pin VQFN package. It is particularly suitable for embedded, industrial, and test systems that need one upstream connection to fan out to four downstream devices. Confirm clock, power, layout, and qualification requirements before final selection.
Is TUSB8042RGCT suitable for industrial USB expansion?
The TUSB8042RGCT is suitable for USB expansion in industrial systems that require four downstream SuperSpeed ports and centralized configuration. Its 5.0 Gbps USB 3.1 Gen 1 capability, GPIO, I2C, and SMBus interfaces support data transfer and supervisory control in compact embedded equipment. Verify the complete electrical and environmental limits in the manufacturer datasheet for the deployed operating conditions.
Where can I buy TUSB8042RGCT online?
Use the Request a Quote form on this page to request TUSB8042RGCT pricing, stock confirmation, and lead time from XAIPART. The component is identified as an active Texas Instruments product with the exact ordering code TUSB8042RGCT. The form provides a direct purchasing route without relying on static price information that may change independently of current inventory.
What is the price of TUSB8042RGCT?
Current TUSB8042RGCT pricing is available through the Request a Quote form on this page. The structured listing is tied to the exact four-port, 64-pin VQFN ordering code and can be refreshed as market conditions change. Request a quote for the required quantity, delivery form, and target shipment location to obtain an actionable commercial response.
What is the lead time for TUSB8042RGCT?
Request the current TUSB8042RGCT lead time through the Request a Quote form on this page. Lead time depends on the requested quantity, package delivery option, and current factory and distribution availability. The form lets purchasing confirm a current delivery commitment for the exact TUSB8042RGCT ordering code instead of relying on a historical estimate.
Is TUSB8042RGCT in stock?
TUSB8042RGCT is listed as an in-stock component in the current component listing, but availability can change rapidly. Use the Request a Quote form on this page to confirm the quantity available for your order. The quotation response should confirm inventory, scheduled delivery, and the exact manufacturer ordering and packaging requirements.
What are the key specifications of TUSB8042RGCT that engineers should know?
The principal TUSB8042RGCT specifications are four downstream SuperSpeed ports, USB 3.1 Gen 1 operation, and a maximum link rate of 5.0 Gbps. It also provides GPIO, I2C, and SMBus interfaces in a 64-pin, 9 mm by 9 mm VQFN package. According to the manufacturer datasheet, an external clock should maintain plus or minus 100 ppm or better stability and less than 50 ps absolute peak-to-peak jitter.

Data referensi engineering untuk TUSB8042RGCT — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the TUSB8042RGCT for a four-port USB 3.1 Gen 1 hub design that requires links up to 5.0 Gbps and system-level GPIO, I2C, or SMBus connectivity. Its 64-pin VQFN package is suited to compact embedded, industrial, test, and docking products where the manufacturer reference layout can be followed closely. The TUSB8042RGCR is the appropriate drop-in choice when the confirmed core electrical configuration and RGC footprint are identical but a different ordering suffix or delivery configuration is required. Neither option should be selected without reviewing the complete pin table, reference-clock limits, power requirements, and USB compliance layout. Other USB hub controllers should be considered only after checking port count, supported USB generation, management interfaces, package dimensions, and firmware or host compatibility; a similar USB function does not by itself establish drop-in compatibility.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini TUSB8042RGCR
Package 64-pin VQFN (RGC) 64-pin VQFN (RGC)
Brand Texas Instruments Texas Instruments
Downstream Port Count 4 ports 4 ports
Maximum Data Rate 5.0 Gbps 5.0 Gbps
USB Version USB 3.1 Gen 1 USB 3.1 Gen 1
Pin Compatibility 64-pin VQFN RGC footprint Pin-to-pin compatible
Ordering Code TUSB8042RGCT TUSB8042RGCR

Diferensiator Kunci

  • Four-port SuperSpeed integration (vsTUSB8042RGCR)
  • Maximum SuperSpeed data rate (vsTUSB8042RGCR)
  • Direct PCB footprint compatibility (vsTUSB8042RGCR)
  • Integrated system-control interfaces (vsTUSB8042RGCR)

Catatan Desain

Route every USB 2.0 and USB 3.1 differential pair as a tightly coupled, impedance-controlled pair with no plane splits beneath the pair. Keep the escape paths from the 64-pin VQFN as short as practical and follow the manufacturer’s reference layout for layer-stack geometry and via placement. The VQFN footprint has dense leads, so pin mapping and escape-routing mistakes can prevent otherwise correct USB signals from meeting timing and compliance requirements.

Distribute supply and ground connections using the manufacturer’s VQFN land pattern, including a properly connected exposed thermal pad. Confirm the required core and I/O supply values, sequencing requirements, and decoupling recommendations in the TUSB8042 datasheet before assigning capacitors. Keep high-current return paths distributed across the package rather than concentrated through a single pin or via, since four active SuperSpeed ports can create rapid simultaneous current changes.

Treat the reference clock as a timing-critical signal. The manufacturer requires external-source stability of plus or minus 100 ppm or better and less than 50 ps absolute peak-to-peak jitter, or less than 25 ps peak-to-peak jitter after applying the USB 3.1 jitter transfer function. Keep the oscillator or crystal circuitry close to the controller, use a continuous return path, and avoid routing the clock beside high-energy switching nodes.

Validate junction temperature and thermal-pad performance at the system’s maximum ambient temperature and worst-case port activity. The 9 mm by 9 mm VQFN can dissipate heat through its exposed pad, so the PCB should provide an uninterrupted copper area and thermal vias where recommended by the manufacturer. Account for adapter, enclosure, and neighboring heat sources because their behavior can change the effective thermal resistance of the assembled board.

Do not infer pin functions from the similar TUSB8042RGCR ordering code without checking the exact package pin table. Also confirm that the selected external clock method, crystal load capacitance, supply rails, and USB connector routing match the TUSB8042RGCT design. The order suffix should be checked during procurement because the confirmed drop-in candidate uses a different suffix even though its core electrical configuration and footprint match.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

Compliance declarations were not stated in the manufacturer or distributor information available for this product. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status with Texas Instruments before releasing the component for regulated production.

Data disahkan pada: 2026-11-16 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Pencarian Terkait

TUSB8042RGCT datasheet TUSB8042RGCT datasheet pdf TUSB8042RGCT pinout TUSB8042RGCT equivalent TUSB8042RGCT replacement TUSB8042RGCT cross reference TUSB8042RGCT vs TUSB8042RGCR TUSB8042RGCT footprint Texas Instruments TUSB8042RGCT TUSB8042RGCT price TUSB8042RGCT stock TUSB8042 4-port USB hub

Komponen dan Istilah Terkait

Texas Instruments TUSB8042 TUSB8042RGCT TUSB8042RGCR USB hub controller USB interface IC USB 3.1 Gen 1 SuperSpeed USB four-port hub 5.0 Gbps GPIO I2C SMBus 64-pin VQFN RGC package 9 mm by 9 mm package reference clock plus or minus 100 ppm peak-to-peak jitter USB differential pair industrial data acquisition test and measurement embedded peripheral expansion docking station surface-mount semiconductor
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ