TUSB8042RGCT - 4-Port USB 3.1 Hub | Texas Instruments
MPN: TUSB8042RGCT ✓ פעילTUSB8042RGCT סקירה
A USB hub controller is an interface integrated circuit within the USB interface IC hierarchy. Its role is to manage traffic between an upstream USB host and multiple downstream ports while providing the electrical and protocol functions required for USB SuperSpeed operation. Unlike a passive USB splitter, a hub controller contains active logic for enumerating devices, managing port events, and coordinating data transfers across the hub.
The TUSB8042RGCT provides four SuperSpeed downstream ports and a 5.0 Gbps maximum data rate. Its GPIO, I2C, and SMBus interfaces support configuration and control functions beyond basic USB signaling. These interfaces can assist with port-status monitoring, programmable control logic, and system-level management. The manufacturer datasheet also identifies a reference-clock requirement for designs using an external clock source.
The clock source requires frequency stability of plus or minus 100 ppm or better. It must also have less than 50 ps absolute peak-to-peak jitter, or less than 25 ps peak-to-peak jitter after applying the USB 3.1 jitter transfer function. These requirements are important because reference-clock instability can reduce margin for eye closure, timing compliance, and reliable enumeration across all four ports.
Typical uses include industrial USB equipment, test and measurement systems, peripheral expansion, embedded computing platforms, and docking systems. In these applications, the controller allows one upstream SuperSpeed USB link to serve multiple downstream peripherals while preserving a single controlled hub function. The I2C and SMBus connections also complement USB devices that require configuration or supervisory access outside the USB protocol.
PCB implementation should follow the manufacturer’s VQFN land pattern and high-speed layout guidance. The 64-pin VQFN package requires careful thermal-pad connection, short differential routing, and continuous reference planes. Power and ground distribution must also support the simultaneous operation of the upstream port and four downstream SuperSpeed ports without introducing unacceptable signal degradation.
This product page combines the exact ordering information, package details, interface capabilities, and clock constraints into an engineering-focused guide. It also distinguishes the confirmed TUSB8042RGCT ordering variant from the limited drop-in alternatives supported by manufacturer and cross-reference information.
חלופות תחליף ישיר עבור TUSB8042RGCT — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם TUSB8042RGCT (אותו גורם צורה וטביעת רגל).
TUSB8042RGCR
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←TUSB8042RGCT מפרטים
| Product Type | USB 3.1 SuperSpeed hub controller |
| Number of Downstream Ports | 4 ports |
| Maximum Data Rate | 5.0 Gbps |
| USB Version | USB 3.1 Gen 1 |
| Upstream Port Count | 1 port |
| General-Purpose I/O Interface | GPIO |
| Serial Interface | I2C and SMBus |
| Reference Clock Frequency Stability | plus or minus 100 ppm or better |
| External Clock Absolute Peak-to-Peak Jitter | less than 50 ps |
| External Clock Jitter After USB Transfer Function | less than 25 ps peak-to-peak |
| Package Type | 64-pin VQFN |
| Package Dimensions | 9 mm x 9 mm |
| סוג הרכבה | Surface mount |
| Maximum USB Link Data Rate | 5.0 Gbps per SuperSpeed link |
מדריך תצורת פינים של TUSB8042RGCT 9 mm x 9 mm
תצורת פינים עבור TUSB8042RGCT (מארזת 9 mm x 9 mm). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.
אין נתוני פריסת פינים מפורטים עבור TUSB8042RGCT.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
TUSB8042RGCT מתאים עבור 6 יישוםs: Industrial USB Data Acquisition, Test and Measurement Systems, Embedded Peripheral Expansion, USB Docking Stations, Communications and Network Equipment, Security and Surveillance Systems.
Industrial USB Data Acquisition
The TUSB8042RGCT fits industrial data-acquisition equipment that must connect several USB instruments to one host controller. Its four downstream SuperSpeed ports provide a common 5.0 Gbps-class interface for peripherals, while GPIO, I2C, and SMBus provide paths for supervisory control and status reporting outside the USB protocol. Place the hub controller between the host connection and the four peripheral ports, then validate signal integrity with the manufacturer differential-pair layout guidance. The principal design consideration is maintaining a continuous ground reference and symmetric routing across the dense 64-pin VQFN footprint.
Test and Measurement Systems
A test and measurement chassis can use the TUSB8042RGCT to consolidate four USB peripherals behind one upstream host link. The controller supports four USB 3.1 Gen 1 downstream ports with rates up to 5.0 Gbps, matching the high-throughput needs of data loggers, instruments, and automated test equipment. GPIO may assist with peripheral-control signaling, while I2C and SMBus can support configuration or monitoring functions in the enclosure. Designers should follow the manufacturer’s 9 mm by 9 mm VQFN land pattern and ensure that power, reference clock, and differential routing meet the published timing and layout constraints.
Embedded Peripheral Expansion
The TUSB8042RGCT is suitable for embedded platforms that need to expand one host USB connection into four downstream ports. Its four-port SuperSpeed architecture avoids implementing four independent hub functions, while the 5.0 Gbps USB 3.1 Gen 1 rate supports high-volume data movement. GPIO, I2C, and SMBus add configuration paths for board-level monitoring. In a compact embedded design, thermal-pad connection and uninterrupted return paths are essential; use the manufacturer’s package drawing and reference layout to maintain signal and thermal performance.
USB Docking Stations
The TUSB8042RGCT can form the central hub function in a docking station intended to connect storage, network, input, and display-adjacent USB devices. Four downstream SuperSpeed ports allow a single upstream host connection to serve multiple peripheral categories at rates up to 5.0 Gbps. Its I2C and SMBus interfaces can support dock-level configuration and supervisory functions, while GPIO can expose status or control signals. The 64-pin VQFN demands careful escape routing for all USB pairs, and the external reference clock must satisfy the manufacturer’s plus or minus 100 ppm stability and jitter requirements.
Communications and Network Equipment
The TUSB8042RGCT is appropriate for communications equipment that uses USB as a service, configuration, or expansion interface. Four downstream ports provide flexible connectivity for diagnostic tools, memory devices, and control peripherals, while the 5.0 Gbps SuperSpeed rate supports burst-heavy workloads. The integrated GPIO, I2C, and SMBus interfaces give the system additional avenues for board-level monitoring and configuration. Layout should minimize discontinuities and crosstalk on USB differential pairs, and the clock source should be positioned to avoid unnecessary noise coupling into the controller and its reference network.
Security and Surveillance Systems
A surveillance controller or edge-recording enclosure can use the TUSB8042RGCT to connect USB storage and auxiliary devices without consuming multiple host-controller resources. Four SuperSpeed downstream ports support data-intensive storage and peripheral connections at up to 5.0 Gbps, while GPIO and SMBus can assist with board-level status functions. The compact 64-pin VQFN package fits space-constrained electronics but requires careful exposed-pad and thermal management. Follow the manufacturer layout recommendation for USB signal pairs and provide a stable reference clock within the specified frequency and jitter limits.
נתוני עזר הנדסיים עבור TUSB8042RGCT — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | TUSB8042RGCR |
|---|---|---|
| Package | 64-pin VQFN (RGC) | 64-pin VQFN (RGC) |
| Brand | Texas Instruments | Texas Instruments |
| Downstream Port Count | 4 ports | 4 ports |
| Maximum Data Rate | 5.0 Gbps | 5.0 Gbps |
| USB Version | USB 3.1 Gen 1 | USB 3.1 Gen 1 |
| Pin Compatibility | 64-pin VQFN RGC footprint | Pin-to-pin compatible |
| Ordering Code | TUSB8042RGCT | TUSB8042RGCR |
מבדילים עיקריים
- Four-port SuperSpeed integration (לעומתTUSB8042RGCR)
- Maximum SuperSpeed data rate (לעומתTUSB8042RGCR)
- Direct PCB footprint compatibility (לעומתTUSB8042RGCR)
- Integrated system-control interfaces (לעומתTUSB8042RGCR)
הערות תכנון
Route every USB 2.0 and USB 3.1 differential pair as a tightly coupled, impedance-controlled pair with no plane splits beneath the pair. Keep the escape paths from the 64-pin VQFN as short as practical and follow the manufacturer’s reference layout for layer-stack geometry and via placement. The VQFN footprint has dense leads, so pin mapping and escape-routing mistakes can prevent otherwise correct USB signals from meeting timing and compliance requirements.
Distribute supply and ground connections using the manufacturer’s VQFN land pattern, including a properly connected exposed thermal pad. Confirm the required core and I/O supply values, sequencing requirements, and decoupling recommendations in the TUSB8042 datasheet before assigning capacitors. Keep high-current return paths distributed across the package rather than concentrated through a single pin or via, since four active SuperSpeed ports can create rapid simultaneous current changes.
Treat the reference clock as a timing-critical signal. The manufacturer requires external-source stability of plus or minus 100 ppm or better and less than 50 ps absolute peak-to-peak jitter, or less than 25 ps peak-to-peak jitter after applying the USB 3.1 jitter transfer function. Keep the oscillator or crystal circuitry close to the controller, use a continuous return path, and avoid routing the clock beside high-energy switching nodes.
Validate junction temperature and thermal-pad performance at the system’s maximum ambient temperature and worst-case port activity. The 9 mm by 9 mm VQFN can dissipate heat through its exposed pad, so the PCB should provide an uninterrupted copper area and thermal vias where recommended by the manufacturer. Account for adapter, enclosure, and neighboring heat sources because their behavior can change the effective thermal resistance of the assembled board.
Do not infer pin functions from the similar TUSB8042RGCR ordering code without checking the exact package pin table. Also confirm that the selected external clock method, crystal load capacitance, supply rails, and USB connector routing match the TUSB8042RGCT design. The order suffix should be checked during procurement because the confirmed drop-in candidate uses a different suffix even though its core electrical configuration and footprint match.
מידע על תאימות
Compliance declarations were not stated in the manufacturer or distributor information available for this product. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status with Texas Instruments before releasing the component for regulated production.