WM8772SEDS/RV - 24-Bit 6-Channel Audio Codec | Cirrus Logic
부품 번호: WM8772SEDS/RV ✓ 활성WM8772SEDS/RV 개요
An audio codec is an integrated circuit that converts between analog audio signals and digital PCM data. The WM8772 belongs to the broader codec hierarchy of interface ICs, audio converters, signal-processing semiconductors, and data-conversion ICs. Its sigma-delta conversion architecture supports high-resolution audio while providing a digital interface for configuration and sample-data transfer. The SPI control connection allows a host processor to program operating parameters and exchange audio data over a compact serial link.
Key features include 24-bit conversion, six-channel operation, support for sampling rates up to 192 kHz, one ADC, three DACs, and separate ADC and DAC signal-to-noise figures of 100 dB and 103 dB. The device uses a 28-SSOP surface-mount package identified as PDSO28, with a body size of 10.20 mm by 5.30 mm and a stated height of 1.75 mm. It is also identified as lead-free, supporting compact, high-density audio equipment designs.
The WM8772SEDS/RV combines an analog audio input path, three digital-to-analog conversion channels, and one analog-to-digital conversion channel in a single device. This integration can reduce the number of separate converters required in a six-channel system. The 103 dB DAC signal-to-noise ratio is 3 dB higher than the 100 dB ADC figure, making the playback paths the device's strongest specified noise-performance area. The 192 kHz capability supports high-resolution source material when the surrounding system clock, digital interface, analog circuitry, and output stage support that rate.
Typical uses include surround-sound receivers, multimedia speakers, digital active speakers, audio docking systems, and embedded playback platforms. In these applications, the codec accepts or generates multiple audio channels while a host processor controls configuration through SPI. The device is also suitable for prototype platforms that need multiple conversion channels without using three separate DAC packages and an additional ADC.
Circuit layout should preserve the integrity of both analog and digital sections. Keep the codec's supply and ground connections close to their package pins, place recommended bypass capacitors at the associated power pins, and route high-speed SPI signals away from sensitive audio inputs. Confirm all supported clock, interface, and bypass-component requirements against the manufacturer datasheet before releasing the PCB layout.
This product page combines the WM8772SEDS/RV's principal conversion specifications with application-specific design guidance, replacement analysis, and a practical view of its SSOP-28 implementation. It is intended to help engineers evaluate codec architecture, interface routing, channel requirements, and PCB integration before selecting a production audio subsystem.
드롭인 대체품: WM8772SEDS/RV — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: WM8772SEDS/RV (동일 폼 팩터 및 풋프린트) — 차이점: Maximum Sampling Rate, Device Type, Digital Interface, Mounting Type, Package Type.
WM8772SEDS/V
✅ 드롭인가격 문의
데이터시트 보기 →WM8772SEDS
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
WM8772SEDS/RV 최대 정격 & 전기적 특성
| Audio Codec Type | 6-channel audio codec |
| Converter Resolution | 24 bit |
| Maximum Sampling Rate | 192 kHz |
| ADC Count | 1 ADC |
| DAC Count | 3 DACs |
| ADC Signal-to-Noise Ratio | 100 dB typical |
| DAC Signal-to-Noise Ratio | 103 dB typical |
| Conversion Architecture | Sigma-delta |
| Control/Data Interface | SPI |
| Package Type | SSOP-28 (PDSO28) |
| Package Body Size | 10.20 mm x 5.30 mm |
| Package Height | 1.75 mm |
| 실장 유형 | Surface-mount SMD |
| Number of Functions | 1 function |
| Process Technology | CMOS |
| Lead-Free Status | Lead-free |
| Qualification Standard | MO-150AH |
WM8772SEDS/RV 1.75 mm 핀 구성 가이드
WM8772SEDS/RV(1.75 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: WM8772SEDS/RV.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
WM8772SEDS/RV 적합 용도: 6 애플리케이션s: Home Theater Audio Receiver, Digital Active Speaker, Multimedia Docking System, USB High-Resolution Audio Interface, Network Audio Player, Digital Recording and Playback Console.
Home Theater Audio Receiver
The WM8772SEDS/RV suits a multichannel home-theater front end that requires a 24-bit sigma-delta audio interface and digital-to-analog conversion up to 192 kHz. Its three DAC channels can generate playback signals for main, center, and surround channels, while the single ADC supports return or monitoring audio when the system architecture requires it. The 103 dB typical DAC signal-to-noise ratio provides a 3 dB advantage over the 100 dB ADC figure. A host processor can configure the codec and exchange PCM data through SPI. Engineering checks include matching the required six-channel architecture, providing a stable clock source, and routing outputs into appropriately designed amplifier stages.
추천
Digital Active Speaker
The WM8772SEDS/RV can serve as the conversion and control element in a digital active-speaker platform. A digital audio source sends PCM data to the host controller, which configures the codec through its 24-bit SPI interface. The three DAC channels support multiway speaker playback or zone routing, and the maximum 192 kHz sampling capability allows high-resolution streams when the source, clocking, and amplifier chain support them. The integrated one-ADC, three-DAC arrangement also reduces converter count. Designers should verify output routing, channel muting requirements, analog output loading, and thermal conditions in the chosen speaker electronics.
추천
Multimedia Docking System
A compact multimedia dock can use the WM8772SEDS/RV to combine high-resolution playback with a return-audio path. The three DACs provide 24-bit output channels for music playback, while the ADC captures a mono return or monitoring path at rates up to 192 kHz. This mixed-signal function is implemented in one 28-SSOP package rather than separate converter packages. The SPI connection integrates naturally with a system controller that handles source selection, volume control, and digital routing. Layout attention should remain on separating analog input traces from SPI and clock signals while maintaining low-impedance supply and ground connections.
추천
USB High-Resolution Audio Interface
The WM8772SEDS/RV can form the conversion section of a high-resolution USB audio interface when its three DAC outputs and one ADC match the product's channel plan. A USB-capable controller receives digital audio and uses SPI to configure the codec, while the WM8772 performs 24-bit sigma-delta conversion at rates up to 192 kHz. Its 100 dB typical ADC signal-to-noise ratio supports a high-quality capture path, and the 103 dB typical DAC figure supports cleaner playback conversion. The implementation must address clock synchronization, supported digital formats, analog gain structure, and USB-class latency rather than relying on channel count alone.
추천
Network Audio Player
The WM8772SEDS/RV is appropriate for a network audio player that decodes high-resolution streams and converts the resulting PCM data into analog playback channels. Its three DACs support multi-channel or multi-zone output, while the 24-bit interface and 192 kHz maximum rate align with high-resolution source material. The SPI control path allows a network processor or digital audio controller to select operating modes and route channels. Design priorities include a low-jitter clock source, stable analog supplies, short output paths, and protection appropriate to the external connectors and downstream amplifiers.
추천
Digital Recording and Playback Console
A digital recording console can use the WM8772SEDS/RV where one analog input and three analog outputs are sufficient. The ADC captures a mono monitoring or instrument channel, and the DACs provide three playback paths at resolutions up to 24 bit and sample rates up to 192 kHz. The 100 dB ADC and 103 dB DAC signal-to-noise ratios give the converter subsystem consistent performance across capture and playback. A control processor manages SPI configuration and synchronization. Designers should confirm whether the required input type, gain range, clock source, and output topology align with the codec, and should evaluate analog filtering carefully at the highest supported sample rates.
추천
추천 제품 요약
엔지니어링 참조 데이터: WM8772SEDS/RV — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | WM8772SEDS/V | WM8772SEDS |
|---|---|---|---|
| Package | SSOP-28 (PDSO28) | SSOP-28 (PDSO28) | SSOP-28 (PDSO28) |
| Brand | Cirrus Logic | Cirrus Logic | Cirrus Logic |
| Converter Resolution | 24 bit | 24 bit | 24 bit |
| Maximum Sampling Rate | 192 kHz | 192 kHz | 192 kHz |
| ADC Signal-to-Noise Ratio | 100 dB typical | 100 dB typical | 100 dB typical |
| DAC Signal-to-Noise Ratio | 103 dB typical | 103 dB typical | 103 dB typical |
| ADC and DAC Count | 1 ADC / 3 DACs | 1 ADC / 3 DACs | 1 ADC / 3 DACs |
| Digital Interface | SPI | SPI | SPI |
| Conversion Architecture | Sigma-delta | Sigma-delta | Sigma-delta |
주요 차별점
- Multiple conversion functions in one package (vs WM8772SEDS/V)
- Higher specified playback noise performance than capture performance (vs WM8772SEDS)
- Compact mixed-signal integration (vs WM8772SEDS/V)
설계 노트
Separate the analog and digital signal paths on the PCB. Place bypass capacitors at the codec's supply pins with short, low-inductance connections, and route SPI, clock, and data signals away from the analog audio inputs. Keep the analog ground and digital return strategy consistent with the manufacturer reference layout. The SSOP-28 footprint is narrow, so check pad access, component spacing, and solder-assembly clearance before placing decoupling capacitors or other high-frequency parts.
Treat clock and SPI routing as high-speed digital interfaces even though the codec also carries analog audio. Use a continuous reference plane, avoid unnecessary stubs, and match digital traces to the impedance of the connected host board where required. Audio performance at 192 kHz depends on clean conversion and output circuitry as well as the codec itself. Verify the supported clock, sample-rate, and data-format combinations in the manufacturer datasheet before fixing the digital interconnect.
Do not select the device solely by its six-channel description. The specified converter arrangement is one ADC and three DACs, and the control and data path is SPI. Confirm that analog input range, DAC output topology, required clocks, power rails, and channel routing match the system. Also verify the meaning of ordering suffixes before changing /RV to another code, because packing method, temperature grade, or other commercial attributes can differ even when the circuit family is shared.
Estimated: P_DISSIPATION equals the sum of analog and digital supply voltage multiplied by the corresponding operating current. Compare that result with the allowed junction-temperature rise for the 28-SSOP package on the intended PCB area. The calculation requires the actual rail voltages, supply currents, ambient temperature, and package thermal resistance from the manufacturer datasheet. Use copper for heat spreading where the layout permits, but do not extend copper beneath analog nodes without following the recommended grounding arrangement.
규정 준수 정보
The product listing identifies WM8772SEDS/RV as lead-free and associates it with MO-150AH. No explicit RoHS, REACH, AEC-Q100, halogen-free, or conflict-minerals declaration was identified.