XC4VLX40-11FFG668C - 41,472-Cell Virtex-4 LX FPGA | AMD
MPN: XC4VLX40-11FFG668C ✗ Akhir HidupXC4VLX40-11FFG668C Ringkasan
A field-programmable gate array, or FPGA, is a programmable digital integrated circuit in which configurable logic blocks and programmable input/output resources implement a digital design. Within the semiconductor hierarchy, an FPGA belongs to the programmable-logic family and provides an ASIC-like hardware function without committing the design to fixed silicon. The Virtex-4 LX family uses Xilinx Advanced Silicon Modular Block architecture and supports general-purpose programmable logic, embedded hard processors, block RAM, and dedicated DSP resources.
The XC4VLX40-11FFG668C provides 41,472 logic cells and 448 user I/O in a dense 668-pin flip-chip ball grid array. Its 90 nm CMOS construction and 1.2 V core supply are characteristic of the Virtex-4 generation. The -11 speed grade controls timing performance, while the commercial temperature suffix supports general commercial equipment rather than the extended industrial temperature range. Exact clock, block-RAM, DSP, and I/O standard parameters should be selected from the family configuration table for the specific design.
Its architecture is suited to parallel datapaths because thousands of configurable logic blocks can execute multiple operations simultaneously. Dedicated block RAM supports buffering, packet storage, and data-plane queues, while DSP slices accelerate multiply-accumulate operations common in filtering and modulation. This combination allows communications, industrial control, test equipment, and image-processing systems to combine fixed-function blocks with programmable logic in one device.
Typical uses include telecom line-card and packet-processing equipment, industrial automation controllers, high-speed data acquisition, radar and signal-processing prototypes, and ASIC prototyping. The 448 I/O resources provide substantial board-level connectivity, although high-speed interfaces require careful assignment of pins, clocking resources, and I/O standards. Legacy designs can also retain an established tool flow and PCB architecture when migrating to a newer FPGA requires board respin.
The primary design consideration is thermal management. A large Virtex-4 LX device can consume substantial power under heavy logic or DSP utilization, so designers should evaluate worst-case activity, supply current, copper area, airflow, and adjacent heat sources. Decoupling, independent and globally buffered clock distribution, proper I/O standard selection, and complete timing closure are essential for reliable operation at the -11 speed grade.
This page combines device identification, verified package and resource information, drop-in speed-grade options, and application-focused engineering guidance. It also documents which specifications require confirmation against the exact Virtex-4 data sheet, helping designers distinguish a true package-compatible substitution from a merely related FPGA.
Alternatif penggantian untuk XC4VLX40-11FFG668C — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian XC4VLX40-11FFG668C (sama faktor bentuk dan footprint) — berbeda di dalam Device Type, Package, Speed Grade, Package Type, Core Supply Voltage.
XC4VLX40-12FFG668C
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
XC4VLX40-11FFG668I
✅ Drop-InKontak untuk harga
Lihat Datasheet →XC4VLX40-10FFG668C
✅ Drop-InKontak untuk harga
Lihat Datasheet →XC4VLX40-12FFG668I
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
XC4VLX40-10FFG668I
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →XC4VLX40-11FFG668C Rating Maksimal & Karakteristik Listrik
| Device Type | Virtex-4 LX FPGA |
| Programmable Logic Cells | 41,472 cells |
| Logic Blocks | 4,608 logic blocks |
| User I/O | 448 I/O |
| Architecture | Advanced Silicon Modular Block (ASMBL) |
| Process Technology | 90 nm CMOS |
| Core Supply Voltage | 1.2 V |
| Speed Grade | -11 |
| Temperature Grade | Commercial (C suffix) |
| Package Type | 668-pin FCBGA |
| Package Pin Count | 668 pins |
| Tipe Mounting | Surface mount |
| Logic Family | CMOS |
| Lead-Free Status | Pb-free |
| Supported Virtex-4 Speed Grades | -12, -11, and -10 |
XC4VLX40-11FFG668C 668 pins Diamant Konfigurasi Panduan
Konfigurasi pin untuk XC4VLX40-11FFG668C (668 pins pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.
Tidak ada data diatribut pin yang tersedia untuk XC4VLX40-11FFG668C.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
XC4VLX40-11FFG668C cocok untuk 6 aplikasis: Telecommunications Line Cards, Industrial Automation and Control, High-Speed Data Acquisition, ASIC Prototyping and Digital Verification, Radar and Signal Processing, Scientific and Test Instrumentation.
Telecommunications Line Cards
The XC4VLX40-11FFG668C fits packet-processing line cards that require parallel logic capacity, extensive external connectivity, and dedicated data-handling resources. Its 41,472 logic cells can support framing, classification, queue control, and protocol adaptation, while 448 I/O provide connections to transceivers, memories, and backplane interfaces. The -11 speed grade helps preserve timing margin in multi-clock datapaths. Designers should constrain interfaces against the selected I/O standards and use the AMD package pinout files when planning the 668-ball FCBGA layout.
Direkomendasikan
Industrial Automation and Control
The XC4VLX40-11FFG668C is useful for industrial controllers that combine motion or machine control with parallel sensor processing, communication gateways, and safety monitoring. Programmable logic blocks can execute multiple control paths concurrently, and the large I/O count simplifies connections to field-bus transceivers, encoders, and discrete I/O. For equipment exposed to wider ambient conditions, evaluate the XC4VLX40-11FFG668I, which retains the same -11 speed grade and FFG668 package while specifying the industrial temperature range.
Direkomendasikan
High-Speed Data Acquisition
The XC4VLX40-11FFG668C can implement parallel data-acquisition pipelines where multiple channels must be captured, filtered, and transferred with predictable timing. Its 4,608 logic blocks and 448 I/O support wide data buses and control logic, while dedicated block RAM can hold acquisition windows and DSP resources can accelerate filtering or correlation. Practical performance depends on selecting suitable I/O standards, keeping data buses timing-constrained, and controlling simultaneous switching noise through careful power and PCB design.
Direkomendasikan
ASIC Prototyping and Digital Verification
The XC4VLX40-11FFG668C provides enough programmable logic and I/O for substantial ASIC prototypes, hardware-assisted verification, and logic test systems. Multiple clock domains, bus arbitration, protocol bridging, and scoreboarding functions can be consolidated into one device instead of being divided among smaller FPGAs. Because the package is a large 668-ball FCBGA, prototype boards must follow the AMD land pattern and power-ball distribution exactly, while validation should include worst-case thermal behavior and exhaustive timing analysis.
Direkomendasikan
Radar and Signal Processing
The XC4VLX40-11FFG668C supports parallel radar and sensor-processing functions such as digital filtering, correlation, spectrum analysis, and target-detection control. Dedicated DSP slices accelerate multiply-accumulate workloads, while block RAM supports circular buffers and multi-channel sample storage. The -11 grade provides additional timing headroom for complex pipelines, but the final clock rate must be evaluated for the selected routing and I/O resources. PCB design also needs controlled impedance, solid return paths, and careful power distribution across the FCBGA.
Direkomendasikan
Scientific and Test Instrumentation
The XC4VLX40-11FFG668C fits laboratory and production-test instruments that coordinate acquisition, pattern generation, timing, and data reduction. The 448 I/O can reduce the need for external multiplexing, while the 41,472 logic cells support control sequencing and real-time analysis. The commercial-grade XC4VLX40-11FFG668C is appropriate where the operating environment remains within commercial limits; otherwise, the XC4VLX40-11FFG668I provides the same package and speed grade with an industrial temperature designation.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk XC4VLX40-11FFG668C — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | XC4VLX40-12FFG668C | XC4VLX40-11FFG668I | XC4VLX40-10FFG668C | XC4VLX40-12FFG668I | XC4VLX40-10FFG668I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 668-pin FCBGA | 668-pin FCBGA - same | 668-pin FCBGA - same | 668-pin FCBGA - same | 668-pin FCBGA - same | 668-pin FCBGA - same |
| Device Family | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX |
| Programmable Logic Cells | 41,472 cells | 41,472 cells | 41,472 cells | 41,472 cells | 41,472 cells | 41,472 cells |
| User I/O | 448 I/O | 448 I/O | 448 I/O | 448 I/O | 448 I/O | 448 I/O |
| Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
| Speed Grade | -11 | -12, one grade faster | -11, same | -10, one grade slower | -12, one grade faster | -10, one grade slower |
| Temperature Grade | Commercial (C) | Commercial (C) | Industrial (I) | Commercial (C) | Industrial (I) | Industrial (I) |
| Process Technology | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS |
| Architecture | Advanced Silicon Modular Block (ASMBL) | Advanced Silicon Modular Block (ASMBL) | Advanced Silicon Modular Block (ASMBL) | Advanced Silicon Modular Block (ASMBL) | Advanced Silicon Modular Block (ASMBL) | Advanced Silicon Modular Block (ASMBL) |
Diferensiator Kunci
- Provides the -11 performance grade without changing the FFG668 board footprint (vsXC4VLX40-10FFG668C)
- Commercial-grade target with a directly package-compatible industrial option (vsXC4VLX40-11FFG668I)
- Supports a faster same-package configuration when additional timing margin is required (vsXC4VLX40-12FFG668C)
Catatan Desain
Evaluate the 1.2 V core rail under worst-case simultaneous logic, block-RAM, DSP, and I/O activity rather than average utilization. Follow the AMD power-distribution diagram for the 668-ball FCBGA, connect all required power and ground balls, and place bulk and local decoupling close to their designated balls. Confirm the regulator's transient response against the device's specified current range and use separate, properly filtered analog or auxiliary supplies where the configuration requires them.
Estimate worst-case junction temperature using device power, package thermal characteristics, PCB copper area, thermal-via density, airflow, and enclosure temperature. Estimated: total dissipation equals 1.2 V multiplied by the core current plus the measured or budgeted I/O and auxiliary-rail power. Use that result for thermal analysis rather than relying on typical activity. Increase inner copper and thermal via density when the available temperature rise exceeds the design margin.
Use the AMD FFG668 package drawing and device pinout files for ball locations, power-ball grouping, and the exposed thermal arrangement. Keep high-speed nets short and provide continuous return planes beneath them. Separate noisy switching outputs from sensitive clock, reference, and low-level analog inputs where possible, and control simultaneous switching noise through edge-rate-aware placement. Validate the complete stackup and ball escape routing with the PCB fabrication rules before release.
Do not treat the XC4VLX40-11FF668C as a substitute for the FFG668 device: the non-G ordering uses a different package configuration and is not a drop-in match. Likewise, do not interchange the -10, -11, and -12 grades without rerunning timing analysis for the actual device. Confirm the speed grade, temperature suffix, package, configuration bitstream, and pinout file together before releasing a purchasing or PCB revision.
Informasi Konformitas
The Mouser listing identifies the XC4VLX40-11FFG668C as Pb-free. RoHS, REACH, halogen-free, and conflict-minerals statuses were not established for this exact MPN and are recorded as unknown.