XC7Z020-1CLG400CES Dual Cortex-A9 Zynq SoC | AMD
MPN: XC7Z020-1CLG400CES ✗ Akhir HidupXC7Z020-1CLG400CES Ringkasan
A Zynq-7000 SoC is an adaptive SoC that places an Arm Cortex-A9 application processor and Xilinx FPGA fabric on the same silicon. This device class extends beyond a conventional microcontroller or stand-alone FPGA: software executes in the processor domain, while programmable logic handles parallel data acquisition, control, interface bridging, and hardware acceleration. The resulting hierarchy is Zynq SoC, adaptive SoC, FPGA and CPLD, programmable logic, processor-based embedded system, and semiconductor.
Key device characteristics include two Cortex-A9 cores, 85K FPGA logic cells, 667 MHz processor performance, and a 400-CSPBGA package. The processor domain supports a conventional software-development flow, while the programmable-logic domain supports high-throughput parallel datapaths. CoreSight provides integrated debug visibility, while the FPGA fabric allows designers to partition an application among software, dedicated processors, and programmable logic.
The main technical benefit is reduced system integration compared with separate processor and FPGA designs. Software-controlled logic can accelerate tasks such as data formatting, packet handling, sensor acquisition, and interface conversion. The integrated architecture also reduces board-level interconnects between the processor and programmable logic. Migration between the XC7Z020, XC7Z010, and related Zynq-7000 devices requires reviewing memory, pinout, power, and device-specific constraints rather than assuming interchangeability.
Typical applications include industrial control gateways, camera and machine-vision systems, communications equipment, embedded data acquisition, network appliances, and test systems. In each case, the Cortex-A9 cores can run operating-system-level software while the Artix-7 fabric handles parallel interfaces or accelerates data movement. The exact processor memory capacities, I/O counts, power rails, and signal parameters must be selected from the manufacturer data sheet for the complete device family.
PCB implementation requires careful treatment of the 400-ball BGA, multiple power and ground domains, high-speed memory routing, and decoupling. Use the manufacturer package pinout files and the CLG400 footprint when assigning ball assignments; do not infer the 400-ball pinout solely from the package dimensions. Validate power sequencing, voltage thresholds, decoupling values, and high-speed layout against the relevant Zynq-7000 implementation guidance.
This page consolidates the exact device identity, package information, lifecycle position, comparison points, and application-oriented design guidance for engineers evaluating XC7Z020-1CLG400CES replacements or planning a CLG400-based Zynq-7000 PCB.
Alternatif penggantian untuk XC7Z020-1CLG400CES — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian XC7Z020-1CLG400CES (sama faktor bentuk dan footprint) — berbeda di dalam Device Type, Mounting Type, Processor Core, Package, Package Dimensions.
XC7Z020-1CLG400I
✅ Drop-InKontak untuk harga
Lihat Datasheet →XC7Z020-1CLG400C
✅ Drop-InKontak untuk harga
Lihat Datasheet →XA7Z020-1CLG400C
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
XQ7Z020-1CLG400C
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
XC7Z020-L1CLG400I
✅ Drop-InKontak untuk harga
Lihat Datasheet →XC7Z020-1CLG400CES Rating Maksimal & Karakteristik Listrik
| Device Type | Zynq-7000 adaptive system-on-chip |
| Processor Core | Dual ARM Cortex-A9 MPCore |
| Debug Support | CoreSight |
| FPGA Family | Artix-7 |
| Logic Cells | 85K |
| Processor Frequency | 667 MHz |
| Paket | 400-CSPBGA (17 x 17 mm) |
| Tipe Mounting | Surface mount |
| Number of Ball Contacts | 400 contacts |
| Device Speed Grade | -1 |
| Product Family | Zynq-7000 |
| Silicon Type | Adaptive SoC with hard processor and programmable FPGA logic |
| CPU Architecture | ARM Cortex-A9 |
| Core Count | 2 cores |
XC7Z020-1CLG400CES 400-cspbga (17 x 17 mm) Diamant Konfigurasi Panduan
Konfigurasi pin untuk XC7Z020-1CLG400CES (400-cspbga (17 x 17 mm) pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.
Tidak ada data diatribut pin yang tersedia untuk XC7Z020-1CLG400CES.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
XC7Z020-1CLG400CES cocok untuk 6 aplikasis: Industrial Control Gateway, Machine Vision and Camera Processing, Communications Equipment, Data Acquisition System, Embedded Test and Measurement, Network Security Appliance.
Industrial Control Gateway
The XC7Z020-1CLG400CES fits an industrial gateway that must execute networking and control software while also handling deterministic interface tasks in programmable logic. The dual Cortex-A9 cores provide a software-processing environment, while the 85K-cell Artix-7 fabric can implement protocol conversion, packet inspection, or parallel data conditioning. Its 400-CSPBGA package supports compact integration of the processing system, memory, Ethernet-class interfaces, and industrial I/O. The practical design benefit is reduced inter-device communication between software and hardware tasks, which can simplify timing analysis. Engineers must assign each function between the processor and programmable-logic domains, then confirm the required I/O count, power domains, memory topology, and operating-temperature grade against the complete Zynq-7000 documentation.
Direkomendasikan
Machine Vision and Camera Processing
The XC7Z020-1CLG400CES is useful in camera and machine-vision equipment where image data must move through predictable parallel pipelines. The two Cortex-A9 cores can run higher-level image processing and control software, while the 85K-cell FPGA fabric can perform pixel formatting, thresholding, frame synchronization, or data reduction before software receives the result. This division reduces pressure on the processor and avoids transferring every raw pixel event through general-purpose software. The 17 x 17 mm 400-CSPBGA package also allows the processor, logic fabric, and high-speed interface logic to share a compact board area. Final implementation requires a camera-specific I/O map, memory bandwidth analysis, and careful BGA routing for high-speed sensor and display interfaces.
Direkomendasikan
Communications Equipment
The XC7Z020-1CLG400CES supports communications appliances that benefit from combining a general-purpose processor with high-throughput programmable logic. The processor domain can handle the control plane, configuration management, and protocol services, while the Artix-7 fabric can implement packet framing, buffering, data-rate conversion, or interface bridging. With 85K logic cells and a 667 MHz listed processor frequency, the device fits designs where parallel hardware acceleration is useful but a larger programmable-logic device would be unnecessary. Deployment depends on available I/O, memory interfaces, supported transceiver types, and system timing. Designers should use the manufacturer package files and device data sheet to assign power, clocks, differential pairs, and high-speed memory connections before PCB release.
Direkomendasikan
Data Acquisition System
The XC7Z020-1CLG400CES can serve as the central controller in a high-rate data-acquisition system by assigning sampling, filtering, and buffer management to programmable logic while software handles calibration and storage. The 85K-cell Artix-7 fabric supports parallel datapaths, while the dual Cortex-A9 cores provide the operating environment needed for configuration, analysis, and external control. This separation is especially useful when several sensors must be sampled with deterministic timing. The 400-CSPBGA footprint is demanding because it requires exact ball assignment, multilayer power distribution, and careful routing to memory and external converters. Validate converter settling time, clock jitter, input bandwidth, synchronization, and thermal performance as a complete signal chain rather than relying on processor or FPGA headline specifications alone.
Direkomendasikan
Embedded Test and Measurement
The XC7Z020-1CLG400CES is appropriate for compact test and measurement equipment where sequencing, instrument control, and real-time signal processing must coexist. The Cortex-A9 side can run the user interface, calibration routines, and test-plan control, while the programmable-logic side can implement deterministic waveform capture, pattern generation, or protocol timing. The 85K logic cells provide parallel processing capacity, and the 667 MHz listed processor frequency supports control-oriented workloads. Because the device uses a 400-CSPBGA package, accurate footprint and pinout data are essential for avoiding expensive board respins. Confirm the required precision interface, external memory, reference-clock architecture, trigger latency, power budget, and enclosure temperature before selecting the device for a specific instrument platform.
Direkomendasikan
Network Security Appliance
The XC7Z020-1CLG400CES can support a network-security appliance that performs packet inspection, encryption acceleration, and secure control functions within one adaptive-SoC package. The processor cores execute operating-system software, policy logic, and management tasks, while the 85K-cell FPGA fabric accelerates fixed-function packet processing or cryptographic data paths. This partition can lower external component count and provide deterministic hardware behavior for selected network functions. The 17 x 17 mm 400-CSPBGA package permits compact implementation, although its dense ball field requires careful manufacturing capability and layer-transition planning. Security-product qualification should include software configuration controls, hardware root-of-trust requirements, fault-injection behavior, long-term supply planning, and validation of every peripheral and memory interface used by the final appliance.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk XC7Z020-1CLG400CES — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | XC7Z020-1CLG400I | XC7Z020-1CLG400C | XA7Z020-1CLG400C | XQ7Z020-1CLG400C | XC7Z020-L1CLG400I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 400-CSPBGA (17 x 17 mm) | 400-CSPBGA (17 x 17 mm) | 400-CSPBGA (17 x 17 mm) | 400-CSPBGA (17 x 17 mm) | 400-CSPBGA (17 x 17 mm) | 400-CSPBGA (17 x 17 mm) |
| Processor | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore |
| FPGA Family | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 |
| Logic Cells | 85K | 85K | 85K | 85K | 85K | 85K |
| Listed Processor Frequency | 667 MHz | 667 MHz | 667 MHz | 667 MHz | 667 MHz | 667 MHz |
| Debug Support | CoreSight | CoreSight | CoreSight | CoreSight | CoreSight | CoreSight |
| Speed Designator | -1 | -1 | -1 | -1 | -1 | -1 low-power variant |
| Ordering Grade | CES suffix | I suffix | C suffix | XA automotive-oriented ordering variant | XQ space-oriented ordering variant | L1 low-power I ordering variant |
Diferensiator Kunci
- Directly identified same-package replacement path (vsXC7Z020-1CLG400I)
- Parameter-equivalent commercial ordering option (vsXC7Z020-1CLG400C)
- Specialized qualification options in the same footprint (vsXA7Z020-1CLG400C)
- Low-power design option without changing package (vsXC7Z020-L1CLG400I)
Catatan Desain
Treat the CLG400 land pattern as an exact 400-ball BGA assignment rather than a generic BGA. Use AMD's Zynq-7000 package device pinout files to verify every ball, especially power, ground, configuration, clock, and high-speed memory connections. Compare the PCB footprint dimensions against the released package drawing and inspect the completed board with an appropriate X-ray or cross-section method before applying the component. A nominal 17 x 17 mm body size alone is not enough to validate footprint compatibility.
Plan the processor and programmable-logic power rails independently even though both domains share one package. Confirm nominal voltage, tolerance, sequencing, startup behavior, current limit, and decoupling requirements from the complete Zynq-7000 data sheet. Place bulk and high-frequency decoupling at the appropriate supply and ground balls with short, low-inductance paths. Review simultaneous processor and logic activity when estimating converter headroom so a full-speed design does not create an unintended brownout margin problem.
Route memory and other high-speed interfaces with continuous reference planes, matched length where required, and avoidance of splits across layer transitions. Separate clocks from noisy switching nodes, use appropriate return paths for high-speed nets, and preserve the specified escape geometry for bonded or fine-pitch BGA escape routing. Complete signal-integrity and power-integrity analysis after the initial placement because package-ball assignment can materially change the achievable routing topology.
Do not treat different CLG package variants as interchangeable. XC7Z020-1CLG400I and XC7Z020-1CLG400C retain the CLG400 footprint, while CLG484 versions have a different package and require PCB changes. Also avoid assuming that a suffix change preserves the original environmental qualification. Record the approved part number, operating-temperature requirements, FPGA configuration method, and lifecycle constraints in the production drawing so an obsolete-part substitution cannot be released without engineering review.
Informasi Konformitas
No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was identified for the exact ordering suffix. The XA7Z020 family naming denotes an automotive-oriented device, but qualification status must be confirmed from its documentation.