AMD

XC7Z030-1FFG676I - Dual Cortex-A9 Zynq SoC | AMD

MPN: XC7Z030-1FFG676I ✓ Aktif
676-FCBGA Package 667 MHz Speed
MOQ: 1 |

XC7Z030-1FFG676I Ringkasan

The AMD XC7Z030-1FFG676I is a Zynq-7000 system-on-chip that combines a dual-core ARM Cortex-A9 MPCore processing system with CoreSight debug capability and Kintex-7-based programmable logic. The device provides 125K logic cells, a maximum listed processor frequency of 667 MHz, and a 676-ball FCBGA package measuring 27 x 27 mm. Its tightly coupled architecture allows software-controlled logic to accelerate hardware functions without moving every operation into a discrete processor.

A Zynq SoC is a heterogeneous semiconductor that belongs to the FPGA and CPLD product hierarchy while also incorporating a hard processor system. The ARM Cortex-A9 subsystem executes operating-system-level software, while the programmable logic fabric supports custom datapaths, interfaces, accelerators, and real-time processing. Physical Package Ball Grid Array (FCBGA) construction supports dense board connections, while the exposed thermal and power characteristics require careful PCB layout.

Principal device attributes include two ARM Cortex-A9 processor cores, 125K logic cells, CoreSight support, 667 MHz processor operation, and the 676-FCBGA package. The processing system also supplies embedded memory and external-memory interfaces, while the programmable logic permits hardware-specific data paths to be implemented in parallel with software tasks. These features make the device suitable for embedded control, industrial automation, communications, image processing, and instrumentation systems.

The architecture separates control-heavy sequencing from deterministic parallel work. Software can manage communications, control flow, and configuration, while programmable logic can implement filters, protocol engines, custom interfaces, or data acquisition channels. This division can reduce external component count compared with a processor and separate FPGA architecture, although firmware, HDL, clocking, memory, and power design must be developed as one integrated system.

Typical Zynq-7000 uses include industrial control platforms, networked gateways, embedded vision, test and measurement equipment, and communications infrastructure. The dual-core processing system supports concurrent software workloads, while the programmable fabric provides application-specific I/O and acceleration. Designers should select board-level memory, power rails, clock sources, and I/O standards to match the intended reference design rather than treating the SoC as a standalone component.

A critical integration consideration is that a 676-FCBGA device requires a dense, multilayer PCB with controlled impedance, via-in-pad or via-beneath-pad arrangements where prescribed, and careful power and ground-plane design. Decoupling must follow the AMD reference design, and thermal performance depends on the package substrate, board copper, airflow, and the selected device speed and temperature grade.

This product record combines the exact orderable MPN, package identification, architecture-level characteristics, drop-in family candidates, and practical integration guidance. It also distinguishes performance-grade and temperature-grade alternatives that preserve the 676-ball footprint while helping engineers evaluate qualification, timing, and availability requirements before releasing a production BOM.

Alternatif penggantian untuk XC7Z030-1FFG676I — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian XC7Z030-1FFG676I (sama faktor bentuk dan footprint) — berbeda di dalam Device Type, Processor Core, Logic Cells, Mounting Type, Package Type.

AMD
Device Type: Zynq-7000 Kintex-7 FPGA SoC
Processor Core: 2 x ARM Cortex-A9 MPCore
Logic Cells: 125K logic cells
Bandingkan dengan XC7Z030-1FFG676I →
AMD
Processor Core: Dual-core Arm Cortex-A9 MPCore
Logic Cells: 125,000 cells
Package Type: 676-pin FCBGA
Bandingkan dengan XC7Z030-1FFG676I →
AMD
Device Type: Zynq-7000 programmable system-on-chip
Processor Core: Dual-core Arm Cortex-A9 MPCore
Logic Cells: 125K
Bandingkan dengan XC7Z030-1FFG676I →
AMD
Mounting Type: Surface-mount BGA
Bandingkan dengan XC7Z030-1FFG676I →
AMD
Device Type: Zynq-7000 Kintex-7 system-on-chip (SoC)
Mounting Type: Surface mount, ball grid array
Package Type: 676-ball FCBGA
Bandingkan dengan XC7Z030-1FFG676I →

XC7Z030-2FFG676I

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
AMD
📦 676-FCBGA (27x27)
Zynq-7000 system-on-chip with dual-core Arm Cortex-A9 and Kintex-7 FPGA · Dual-core Arm Cortex-A9 MPCore · 800 MHz · 125K logic cells · Kintex-7 · Zynq-7000 · FPGA · CoreSight

Kontak untuk harga

Lihat Datasheet →

XC7Z030-1FFG676C

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
AMD
📦 676-FCBGA (27x27)
Zynq-7000 programmable system-on-chip · Kintex-7 FPGA · Dual-core Arm Cortex-A9 MPCore · 667 MHz · 125,000 cells · CoreSight · 676-pin FCBGA · 27 mm x 27 mm

Kontak untuk harga

Lihat Datasheet →

XC7Z030-1FFG676E

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 676-FCBGA (27x27)
Uses the E temperature-grade suffix instead of I; pin count remains 676 and package dimensions remain 27 x 27 mm.

📋 Alternatif referensi (tidak dalam katalog)

XC7Z030-2FFG676E

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
AMD
📦 676-FCBGA (27x27)
Zynq-7000 programmable system-on-chip · Dual-core Arm Cortex-A9 MPCore · 800 MHz · Kintex-7 · 125K · CoreSight · 676-ball FCBGA, 27 x 27 mm · 676 balls

Kontak untuk harga

Lihat Datasheet →

XC7Z030-3FFG676E

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
AMD
📦 676-FCBGA (27x27)
Zynq-7000 Kintex-7 system-on-chip (SoC) · Dual ARM Cortex-A9 MPCore · 1 GHz · 125K logic cells · Kintex-7 · -3 · E extended-temperature designation · CoreSight

Kontak untuk harga

Lihat Datasheet →

XC7Z030-1FFG676I Rating Maksimal & Karakteristik Listrik

Device Type Zynq-7000 SoC with programmable logic and ARM processor
Processor Core Dual ARM Cortex-A9 MPCore
Processor Count 2 cores
Processor Frequency 667 MHz
Programmable Logic Architecture Kintex-7 FPGA
Logic Cell Count 125K logic cells
Debug Capability CoreSight
Package Type 676-FCBGA
Package Ball Count 676 balls
Package Dimensions 27 x 27 mm
Mounting Technology Surface mount
Speed Grade -1 grade
Temperature Grade Code I suffix

XC7Z030-1FFG676I 27 x 27 mm Diamant Konfigurasi Panduan

Konfigurasi pin untuk XC7Z030-1FFG676I (27 x 27 mm pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.

Diamant diagram pakai pakai 27 x 27 mm untuk XC7Z030-1FFG676I

Tidak ada data diatribut pin yang tersedia untuk XC7Z030-1FFG676I.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

XC7Z030-1FFG676I cocok untuk 6 aplikasis: Industrial Automation and Motion Control, Industrial Networking Gateway, Embedded Vision and Image Processing, Test and Measurement Equipment, Communications Infrastructure, Aerospace and Defense Control Systems.

🏭

Industrial Automation and Motion Control

The XC7Z030-1FFG676I fits industrial controllers that must coordinate machine sequencing and execute deterministic I/O logic. The dual ARM Cortex-A9 cores can run control software, communications, diagnostics, and safety-adjacent supervisory functions, while the 125K-cell Kintex-7 fabric can implement encoder interfaces, pulse trains, timing capture, and parallel sensor acquisition. Placing both functions in one SoC can simplify the processor-to-ADC or processor-to-motor-control path. The design must provide carefully filtered supplies, a multilayer PCB, and robust thermal management, particularly at the -1 performance grade.

🌐

Industrial Networking Gateway

The XC7Z030-1FFG676I can serve as the central processor in an industrial gateway that bridges Ethernet, serial, fieldbus, and local sensor networks. Linux-capable ARM processing handles protocol stacks, routing, management, and secure connectivity, while programmable logic can accelerate packet inspection, data filtering, or interface conversion. Its 667 MHz dual-core configuration allows operating-system and communications tasks to run concurrently. A practical design should isolate high-speed communications from sensitive power domains and follow AMD reference constraints for decoupling, clocking, and package escape routing.

📺

Embedded Vision and Image Processing

The XC7Z030-1FFG676I is suited to embedded imaging systems that benefit from programmable parallel pipelines. Camera data can enter through FPGA fabric, pass through filtering or format-conversion stages, and then move to the ARM subsystem for control, storage, or network transmission. The 125K logic cells and dual Cortex-A9 cores divide fixed-function signal processing from flexible high-level control without requiring a separate FPGA. Designers must plan memory bandwidth carefully and validate that the selected camera interface, memory configuration, and image-processing throughput meet the system latency target.

🔧

Test and Measurement Equipment

The XC7Z030-1FFG676I supports compact test and measurement systems requiring flexible acquisition logic and an embedded control processor. Programmable logic can manage counters, timing channels, waveform capture, pattern generation, and high-speed data conditioning, while the ARM cores execute instrument control, calibration, analysis, and user-interface software. Integrating these functions into one 676-FCBGA device can reduce interconnects and board area. Clock-jitter, impedance, grounding, and thermal isolation remain critical, so the implementation should follow the AMD reference design and use high-quality analog and digital partitioning.

🌐

Communications Infrastructure

The XC7Z030-1FFG676I can implement communications equipment that separates protocol control from high-throughput bit processing. The ARM Cortex-A9 subsystem can manage link control, routing, diagnostics, and configuration, while the programmable fabric can accelerate framing, filtering, scrambling, or packet-buffer operations. The listed 667 MHz processor frequency and two cores provide capacity for concurrent control-plane software. Designers must verify lane assignments, transceiver requirements, clock domains, and package-specific high-speed escape routing before selecting the exact Zynq-7000 ordering code.

✈️

Aerospace and Defense Control Systems

The XC7Z030-1FFG676I offers a processor-plus-FPGA architecture suitable for avionics, guidance, and mission-control subsystems where programmable logic can accelerate deterministic functions while the processor executes supervisory software. The Zynq-7000 integration can reduce component count and shorten communication paths between control logic and processors. However, the I suffix must be checked against the complete product’s environmental and qualification requirements, and AEC-Q100 status should not be inferred from that suffix. Mission-critical adoption also requires traceability, radiation and reliability review, and controlled configuration management.

What are the key specifications of XC7Z030-1FFG676I that engineers should know?
The XC7Z030-1FFG676I combines a dual-core ARM Cortex-A9 processing system with 125K Kintex-7 logic cells in a 676-FCBGA package measuring 27 x 27 mm. According to the AMD Zynq-7000 data sheet, the listed processor frequency is 667 MHz and the device includes CoreSight debug capability. Its principal engineering value is the combination of a software-capable ARM subsystem and programmable logic in one package, allowing hardware pipelines and control software to operate together.
What is the XC7Z030-1FFG676I used for?
The XC7Z030-1FFG676I is used when a design needs both a general-purpose processor and custom programmable hardware. Its two ARM Cortex-A9 cores can run control software, while the 125K-cell Kintex-7 fabric can implement parallel datapaths, interfaces, or accelerators. According to the AMD Zynq-7000 data sheet, the device combines these resources in a single 676-FCBGA package, making it appropriate for industrial automation, communications, instrumentation, and embedded processing.
Where can I download the XC7Z030-1FFG676I datasheet PDF?
The official AMD Zynq-7000 data sheet is available through the AMD documentation link listed on this page. The document is titled for XC7Z030, XC7Z035, and XC7Z045 devices and covers the common Zynq-7000 processing system and programmable-logic architecture. For PCB implementation, use the XC7Z30-FBG676/FFG676 package placement diagram and the Zynq-7000 package pinout files published by AMD.
Where can I find the XC7Z030-1FFG676I pinout?
The AMD Zynq-7000 package pinout files and the XC7Z30-FBG676/FFG676 package placement diagram are the correct references for the XC7Z030-1FFG676I. The device uses a 676-ball FCBGA package with a 27 x 27 mm body. Because this is a large ball-grid package, use the official package file for every ball assignment and PCB escape rather than relying on a simplified terminal diagram.
Is the XC7Z030-1FFG676I compatible with XC7Z030-1FBG676I?
The XC7Z030-1FBG676I is a close family candidate, but it should not be assumed to be an automatic drop-in replacement. Both are listed as 676-FCBGA, 27 x 27 mm Zynq-7000 devices, yet AMD describes the FBG676 and FFG676 package pinouts separately. Check the official package placement files, ball assignments, power requirements, and qualification needs before substituting one ordering code for the other.
What is the difference between XC7Z030-2FFG676I and XC7Z030-1FFG676I?
The principal ordering-code difference is the performance grade: XC7Z030-1FFG676I uses the -1 grade, while XC7Z030-2FFG676I uses the -2 grade. Both retain the XC7Z030 device identity and FFG676 package designation, but timing margins and power behavior can differ with the grade. The AMD Zynq-7000 data sheet and applicable design tools should be used to confirm timing closure and thermal requirements.
When should I choose XC7Z030-2FFG676I instead of XC7Z030-1FFG676I?
Choose XC7Z030-2FFG676I when the design requires the higher -2 performance grade and the associated timing profile satisfies all interfaces. Both parts use the same FFG676 package designation, but a performance-grade change can affect maximum operating frequency, power, heat generation, and tool timing results. XC7Z030-1FFG676I remains appropriate when its timing margin is sufficient and lower power or thermal burden is preferred.
What can replace XC7Z030-1FFG676I on the same PCB footprint?
The closest drop-in-family candidates are XC7Z030 devices using the FFG676 package, including XC7Z030-2FFG676I and qualified temperature-grade variants. A candidate is suitable only after verifying ball compatibility, speed-grade timing, power sequencing, temperature requirements, and the AMD-supported configuration. The XC7Z030-1FBG676I also uses a 676-FCBGA body, but its package pinout must be checked separately rather than assumed interchangeable.
What is the best AMD equivalent for XC7Z030-1FFG676I?
XC7Z030-2FFG676I is the closest same-package AMD family option because it preserves the XC7Z030 device and FFG676 package while using the -2 performance grade. XC7Z030 variants with commercial, industrial, or extended-temperature suffixes may also fit the footprint, but their qualification differs. Select the exact ordering code only after checking the required temperature grade and confirming timing closure with the AMD implementation tools.
Where can I buy XC7Z030-1FFG676I online?
Use the Request a Quote form on this page to request XC7Z030-1FFG676I availability, commercial terms, and delivery scheduling. The form allows the request to include the exact 676-FCBGA ordering code, required quantity, and target date. Because availability can change independently of technical specifications, confirm lot, lifecycle, and delivery status before committing a production schedule.
What is the price of XC7Z030-1FFG676I?
Use the Request a Quote form on this page for the current commercial price of XC7Z030-1FFG676I. Quote terms can depend on quantity, schedule, and order configuration, so a static figure may not represent the amount that can be committed. Include the exact MPN, required quantity, target delivery date, and whether multiple sourcing quantities are needed.
What is the lead time and stock status for XC7Z030-1FFG676I?
The current stock position and lead time should be requested through the Request a Quote form on this page. Specify the quantity, target shipment date, and acceptable delivery window. The device is listed for purchase in current distribution listings, but availability can change by package, grade, quantity, and manufacturing lot, making a quotation appropriate for production planning.
Is XC7Z030-1FFG676I suitable for an industrial control system?
The XC7Z030-1FFG676I is architecturally suitable for industrial control because it combines two ARM Cortex-A9 cores with 125K programmable logic cells. The logic fabric can implement deterministic I/O, communication interfaces, motion-control datapaths, or monitoring channels alongside the processor. Final suitability depends on the I suffix temperature grade, operating environment, power design, long-term availability, and qualification requirements of the complete product.
What does the XC7Z030-1FFG676I architecture allow designers to implement?
The architecture allows designers to partition a system between the dual ARM Cortex-A9 processor and the Kintex-7 programmable logic. Software can perform sequencing, networking, and control, while FPGA logic can accelerate filtering, protocol conversion, signal acquisition, or other deterministic operations. This heterogeneous implementation can reduce external logic and processing components, but it also requires coordinated HDL, software, memory, clock, and power-system design.
Is XC7Z030-1FFG676I RoHS compliant and AEC-Q100 qualified?
The current RoHS, REACH, lead-free, halogen-free, and automotive-qualification status must be confirmed from the manufacturer’s compliance records for the exact ordering code. The XC7Z030-1FFG676I includes an I temperature-grade suffix, but that suffix alone does not establish AEC-Q100 qualification. Use the Request a Quote form to request the applicable compliance documentation and traceable manufacturing information.

Data referensi engineering untuk XC7Z030-1FFG676I — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose XC7Z030-1FFG676I when a design needs the Zynq-7000 combination of a dual-core ARM Cortex-A9 processing system, 125K Kintex-7 logic cells, and a 676-FCBGA package, while the -1 performance grade and I temperature-grade designation satisfy the design requirements. Select XC7Z030-2FFG676I when additional timing performance is valuable and its power profile remains acceptable. Choose XC7Z030-1FFG676C only when its temperature qualification matches the product environment, and choose an E-suffix option when extended-temperature requirements justify that designation. XC7Z030-3FFG676E is appropriate when the -3 timing profile is required, but it may increase power and thermal demands. Do not substitute XC7Z030-1FBG676I without checking its separate package ball map. Before releasing any alternative, verify the official pinout file, memory settings, power sequence, timing closure, qualification status, and lifecycle commitment.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini XC7Z030-2FFG676I XC7Z030-1FFG676C XC7Z030-1FFG676E XC7Z030-2FFG676E XC7Z030-3FFG676E
Package 676-FCBGA (27x27) 676-FCBGA (27x27) 676-FCBGA (27x27) 676-FCBGA (27x27) 676-FCBGA (27x27) 676-FCBGA (27x27)
Brand AMD AMD AMD AMD AMD AMD
Device Family Zynq-7000 XC7Z030 Zynq-7000 XC7Z030 Zynq-7000 XC7Z030 Zynq-7000 XC7Z030 Zynq-7000 XC7Z030 Zynq-7000 XC7Z030
Performance Grade -1 -2 -1 -1 -2 -3
Temperature Grade Suffix I I C E E E
Processor Architecture Dual ARM Cortex-A9 MPCore Dual ARM Cortex-A9 MPCore Dual ARM Cortex-A9 MPCore Dual ARM Cortex-A9 MPCore Dual ARM Cortex-A9 MPCore Dual ARM Cortex-A9 MPCore
Programmable Logic Kintex-7 FPGA, 125K logic cells Kintex-7 FPGA, 125K logic cells Kintex-7 FPGA, 125K logic cells Kintex-7 FPGA, 125K logic cells Kintex-7 FPGA, 125K logic cells Kintex-7 FPGA, 125K logic cells
Listed Processor Frequency 667 MHz 667 MHz 667 MHz 667 MHz 667 MHz 667 MHz
Package Ball Count 676 balls 676 balls 676 balls 676 balls 676 balls 676 balls

Diferensiator Kunci

  • Combines dual-core processing and programmable logic in one SoC (vsXC7Z030-2FFG676I)
  • Matches the 676-ball FFG676 footprint across family alternatives (vsXC7Z030-1FFG676C)
  • Supports grade selection without changing the package body (vsXC7Z030-3FFG676E)

Catatan Desain

Use the AMD FFG676 package placement and pinout files as the authority for every ball assignment and escape route. The 676-FCBGA package requires a multilayer PCB with short, matched-length escape paths where interface timing demands them. Place decoupling structures close to the device, preserve the recommended ball and via geometry, and separate sensitive analog inputs from switching and high-speed digital returns. Do not derive the layout from a generic BGA symbol.

Implement the power rails and sequencing in accordance with the AMD Zynq-7000 reference design. The 667 MHz dual-core processing system and 125K-cell programmable logic can create substantial dynamic demand, so rail droop and switching noise must be controlled. Provide local high-frequency decoupling, adequate bulk capacitance, and independent return paths for each supply group. Validate worst-case current, startup order, and processor performance state rather than sizing the rails only for idle current.

The package’s 27 x 27 mm FCBGA construction requires board-level heat spreading. Use the recommended thermal-via arrangement and continuous copper planes where the AMD design guidance permits them, and assess the final PCB with the intended enclosure and airflow. The -1 performance grade can change dynamic power relative to lower-speed alternatives. Estimated thermal design must use actual rail voltage, processor utilization, logic activity, ambient temperature, and the package thermal model; none of those calculation inputs is specified here.

Separate clock, high-speed serial, and general-purpose I/O return paths so switching current does not share noisy references with sensitive circuitry. Match impedance according to the selected AMD interface and board stack-up, and observe any package-specific launch and routing rules. Validate timing with the actual speed grade because replacing the -1 device with a -2 or -3 candidate can change timing margins, power draw, and required implementation constraints.

Do not treat all 676-FCBGA Zynq-7000 suffixes as automatically interchangeable. FBG676 and FFG676 package files are documented separately, while speed and temperature suffixes alter qualification and timing characteristics. Before replacing XC7Z030-1FFG676I, compare the complete ordering code, official ball map, supported memory configuration, voltage requirements, tool target, thermal requirements, and production lifecycle status. A matching body size alone does not establish pin compatibility.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

Compliance and qualification documents for the exact XC7Z030-1FFG676I ordering code were not included. Request current documentation through the Request a Quote form.

Data disahkan pada: 2026-11-14 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Pencarian Terkait

xc7z030 1ffg676i xc7z030 1ffg676i datasheet XC7Z030-1FFG676I pinout XC7Z030-1FFG676I equivalent XC7Z030-1FFG676I replacement XC7Z030-1FFG676I price XC7Z030-1FFG676I stock AMD XC7Z030-1FFG676I xc7z030 2ffg676i xc7z030 1fbg676i xc7z030 2fbg676i xc7z030 3ffg676e

Komponen dan Istilah Terkait

AMD XC7Z030-1FFG676I XC7Z030 Zynq-7000 Kintex-7 FPGA ARM Cortex-A9 MPCore CoreSight System-on-Chip FPGA CPLD programmable logic heterogeneous processing architecture 676-FCBGA FCBGA Ball Grid Array surface-mount package 667 MHz 125K logic cells industrial automation embedded vision industrial networking test and measurement RoHS REACH AEC-Q100
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ