AMD

XC7Z030-3FFG676E - Dual-Core Zynq-7000 SoC | AMD

MPN: XC7Z030-3FFG676E ✓ Aktif
676-ball FCBGA Package 1 GHz Speed
MOQ: 1 |

XC7Z030-3FFG676E Ringkasan

The AMD/Xilinx XC7Z030-3FFG676E is a Zynq-7000 Kintex-7 system-on-chip that combines a dual-core Arm Cortex-A9 MPCore processor with CoreSight debug technology and Kintex-7 FPGA fabric. The device provides 125K logic cells, a maximum processor clock of 1 GHz, and a 676-ball FCBGA package measuring 27 x 27 mm. Its integrated architecture places a programmable processor system and FPGA fabric in one package, allowing hardware acceleration, parallel processing, and flexible peripheral interfacing in a single device.

A Zynq-7000 SoC belongs to the FPGA & CPLD product hierarchy and combines an Arm application processing unit with programmable logic. The ARM Cortex-A9 cores execute operating-system-level software, networking stacks, and control code, while the Kintex-7 fabric implements hardware accelerators, custom interfaces, signal processing, and time-critical logic. This combination removes much of the complexity associated with separate processors and FPGAs while retaining software programmability and hardware-level parallelism.

The XC7Z030-3FFG676E is identified as the -3 speed-grade device and operates with an extended-temperature designation. Its 125K logic-cell Kintex-7 fabric targets applications that need more programmable resources than small microcontroller-based logic devices while avoiding the cost and complexity of a large ASIC. The 1 GHz processor specification and CoreSight integration support a unified development flow spanning software, embedded Linux, real-time operating systems, and hardware debugging.

Typical uses include industrial machine vision, network and telecom equipment, industrial Ethernet gateways, high-speed data acquisition, software-defined radio, embedded analytics, and test-and-measurement systems. The dual-core processor handles control planes and network services, while FPGA fabric can accelerate parallel algorithms or implement deterministic interfaces. Common applications also include radar, aerospace, and defense processing systems where programmable logic and real-time software must coexist.

The 676-ball FCBGA package requires a dense multilayer PCB with controlled impedance routing, careful power-plane design, and thermal management appropriate for a large programmable SoC. Use the AMD package placement diagram and the Zynq-7000 device pinout files when assigning ball locations. Programming the device requires the corresponding Xilinx or AMD hardware toolchain and device support for the exact speed, package, and temperature identifiers.

This page combines the verified device identity, package information, procurement references, and engineering guidance with family-level selection criteria and drop-in alternatives. It is intended to help engineers evaluate clocking, memory interfaces, I/O, thermal requirements, PCB complexity, and software compatibility before committing a 676-ball FCBGA design to production.

Alternatif penggantian untuk XC7Z030-3FFG676E — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian XC7Z030-3FFG676E (sama faktor bentuk dan footprint) — berbeda di dalam Device Type, Mounting Type, Package, Package Type, Product Type.

AMD
Package Type: 676-pin FCBGA
Product Type: Zynq-7000 programmable system-on-chip
Bandingkan dengan XC7Z030-3FFG676E →
AMD
Device Type: Zynq-7000 SoC with programmable logic and ARM processor
Package Type: 676-FCBGA
Bandingkan dengan XC7Z030-3FFG676E →
AMD
Mounting Type: Surface-mount flip-chip BGA
Package: 676-pin FCBGA
Product Type: Zynq-7000 Kintex-7 FPGA SoC
Bandingkan dengan XC7Z030-3FFG676E →
AMD
Device Type: Zynq-7000 programmable system-on-chip
Package: 676-ball FCBGA, 27 x 27 mm
Bandingkan dengan XC7Z030-3FFG676E →
AMD
Mounting Type: Surface-mount BGA
Package: 676-FCBGA
Product Type: Zynq-7000 system-on-chip with dual-core Arm Cortex-A9 and Kintex-7 FPGA
Bandingkan dengan XC7Z030-3FFG676E →

XC7Z030-3FFG676C

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 676-ball FCBGA (FFG676, 27 x 27 mm)
Same 676-ball FFG676 package and -3 speed grade; C commercial temperature grade replaces E extended-temperature grade

📋 Alternatif referensi (tidak dalam katalog)

XC7Z030-2FFG676I

✅ Drop-In
AMD
📦 676-ball FCBGA (FFG676, 27 x 27 mm)
Zynq-7000 system-on-chip with dual-core Arm Cortex-A9 and Kintex-7 FPGA · Dual-core Arm Cortex-A9 MPCore · 800 MHz · 125K logic cells · Kintex-7 · Zynq-7000 · FPGA · CoreSight

Kontak untuk harga

Lihat Datasheet →

XC7Z030-1FFG676I

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
AMD
📦 676-ball FCBGA (FFG676, 27 x 27 mm)
Zynq-7000 SoC with programmable logic and ARM processor · Dual ARM Cortex-A9 MPCore · 2 cores · 667 MHz · Kintex-7 FPGA · 125K logic cells · CoreSight · 676-FCBGA

Kontak untuk harga

Lihat Datasheet →

XC7Z030-2FFG676C

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 676-ball FCBGA (FFG676, 27 x 27 mm)
Same 676-ball FFG676 package; -2 speed grade replaces -3, a one-grade performance reduction, while C commercial temperature grade replaces E

📋 Alternatif referensi (tidak dalam katalog)

XC7Z030-1FFG676C

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
AMD
📦 676-ball FCBGA (FFG676, 27 x 27 mm)
Zynq-7000 programmable system-on-chip · Kintex-7 FPGA · Dual-core Arm Cortex-A9 MPCore · 667 MHz · 125,000 cells · CoreSight · 676-pin FCBGA · 27 mm x 27 mm

Kontak untuk harga

Lihat Datasheet →

XC7Z030-3FFG676E Rating Maksimal & Karakteristik Listrik

Device Type Zynq-7000 Kintex-7 system-on-chip (SoC)
Processor Core Dual ARM Cortex-A9 MPCore
Maximum Processor Frequency 1 GHz
FPGA Logic Cells 125K logic cells
FPGA Family Kintex-7
Speed Grade -3
Temperature Grade E extended-temperature designation
Debug Support CoreSight
Package Type 676-ball FCBGA
Package Dimensions 27 x 27 mm
Package Designation FFG676
Tipe Mounting Surface mount, ball grid array
Packaging Tray
Minimum Order Quantity 1 piece
Manufacturer Lead Time 16 weeks
Status Lingkungan Hidup Active
Status RoHS RoHS3 compliant
Product Category Embedded system-on-chip (SoC)
Manufacturing Technology 28 nm

XC7Z030-3FFG676E ffg676 Diamant Konfigurasi Panduan

Konfigurasi pin untuk XC7Z030-3FFG676E (ffg676 pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.

Diamant diagram pakai pakai ffg676 untuk XC7Z030-3FFG676E

Tidak ada data diatribut pin yang tersedia untuk XC7Z030-3FFG676E.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

XC7Z030-3FFG676E cocok untuk 6 aplikasis: Industrial Machine Vision, Industrial Ethernet Gateway, High-Speed Data Acquisition, Software-Defined Radio, Aerospace and Defense Processing, Test and Measurement Equipment.

🏭

Industrial Machine Vision

The XC7Z030-3FFG676E suits machine-vision systems that combine image-processing algorithms with real-time system control. Its dual Cortex-A9 cores can run camera control, networking, and higher-level vision software, while the 125K logic-cell fabric can accelerate pixel pipelines, perform thresholding, or interface directly to high-speed sensors. The 1 GHz processor class provides additional headroom for image buffering and control tasks. Use the -3 speed grade when memory-interface or fabric timing lacks margin, and review the extended-temperature E designation against the enclosure environment.

🌐

Industrial Ethernet Gateway

The XC7Z030-3FFG676E is appropriate for an industrial Ethernet gateway that must run network stacks, protocol conversion, and management software while offloading time-critical traffic processing to programmable logic. The dual Arm Cortex-A9 architecture supports the control plane, and the Kintex-7 fabric can implement protocol accelerators, custom packet filters, or deterministic data paths. Its 125K logic cells allow meaningful hardware parallelism without moving to a much larger FPGA. Timing closure for memory interfaces and the exact Ethernet PHY interface should be verified against the -3 speed-grade timing data.

📊

High-Speed Data Acquisition

The XC7Z030-3FFG676E can serve as the control and processing device in a high-speed acquisition platform. The programmable fabric can capture parallel or serialized sensor data, perform triggering and channel conditioning, and transfer buffers over high-bandwidth memory interfaces, while the processor manages configuration, calibration, and host communication. The 1 GHz Cortex-A9 processing supports background control tasks without occupying fabric resources. Use the manufacturer's memory timing budgets to select clock and memory configurations, and account for the 676-ball package's demanding power and routing requirements.

📡

Software-Defined Radio

The XC7Z030-3FFG676E is suitable for software-defined radio architectures that divide signal-path work between programmable logic and software. The Kintex-7 fabric can implement digital filtering, modulation, synchronization, or fast correlation, while the dual Cortex-A9 cores run control software, configuration logic, and network management. The combined 125K logic cells and 1 GHz processor class provide useful performance in compact radio designs. Validate high-speed transceiver interfaces, clocking, and memory timing against the selected board schematic and the -3 device timing limits.

✈️

Aerospace and Defense Processing

The XC7Z030-3FFG676E fits embedded aerospace, defense, and rugged communications systems that need a processor and programmable logic on the same device. The Cortex-A9 cores can run real-time operating systems, health monitoring, and mission-control software, while the FPGA fabric handles sensor fusion, data formatting, or interface timing. The E temperature-grade identifier supports extended-temperature design planning, but system qualification and reliability requirements remain the buyer's responsibility. Secure design, radiation, and long-term availability requirements should be assessed separately before production release.

🔧

Test and Measurement Equipment

The XC7Z030-3FFG676E is useful in test-and-measurement instruments where deterministic acquisition and flexible control must coexist. Logic resources can implement fast counters, trigger logic, waveform capture paths, or interface adapters, while the processor handles instrument control, analysis software, and remote communications. The 125K logic-cell fabric provides more parallelism than a conventional microcontroller while the integrated processor reduces system-level integration. Confirm acquisition timing, memory bandwidth, trigger latency, and thermal behavior with the actual instrument implementation and PCB stack-up.

What is the XC7Z030-3FFG676E?
The AMD/Xilinx XC7Z030-3FFG676E is a Zynq-7000 Kintex-7 system-on-chip combining a dual-core Arm Cortex-A9 MPCore processor with 125K logic cells of programmable FPGA fabric. The device operates at up to 1 GHz and is packaged in a 676-ball FCBGA measuring 27 x 27 mm. Its architecture allows software-controlled applications and hardware accelerators to share one package and interconnect.
What are the key specifications of XC7Z030-3FFG676E?
The XC7Z030-3FFG676E provides 125K FPGA logic cells, a dual-core Arm Cortex-A9 processor system, and a maximum processor frequency of 1 GHz. It uses a 676-ball FCBGA package with a 27 x 27 mm footprint and includes CoreSight debug support. The device is manufactured on a 28 nm process and carries an extended-temperature E-grade designation.
Is XC7Z030-3FFG676E pin-compatible with XC7Z030-3FFG676C?
The XC7Z030-3FFG676C uses the same FFG676 package family and -3 speed grade, making it the closest same-package alternative in this comparison. The principal difference is the temperature-grade designation: E denotes the extended-temperature version, while C denotes the commercial-temperature version. For deployments requiring operation across the extended commercial or industrial temperature range, retain the E-grade part.
What is the difference between XC7Z030-3FFG676E and XC7Z030-2FFG676I?
Both devices use the 676-ball FFG package and the same Zynq-7000 Kintex-7 architecture with 125K logic cells. The XC7Z030-3FFG676E is the -3 speed grade with an E temperature designation, while XC7Z030-2FFG676I is the -2 speed grade with an industrial temperature designation. The -3 grade provides the higher performance class; the -2 part is a lower-cost option where maximum processor performance is unnecessary.
Can XC7Z030-2FFG676I replace XC7Z030-3FFG676E?
The XC7Z030-2FFG676I can serve as a same-package migration candidate because both use the FFG676 footprint and the same Zynq-7000 architecture. It differs in speed grade and temperature suffix, so timing constraints and the required environmental range must be reviewed before substitution. The -3 target provides the higher performance class, while the -2 device can reduce cost in less performance-sensitive designs.
When should I choose XC7Z030-3FFG676E over a lower-speed XC7Z030 device?
Choose XC7Z030-3FFG676E when processor throughput, memory-interface timing, or FPGA performance margins are more important than minimizing unit cost. The -3 speed grade is intended to provide additional timing performance over lower-numbered grades in the same device family. Choose a lower-speed part instead when the existing design has verified timing closure with substantial margin and extended-temperature operation is not required.
Where can I download the XC7Z030-3FFG676E datasheet PDF?
The manufacturer data sheet is available through the AMD documentation portal for the XC7Z030 and XC7Z045 Zynq-7000 devices. It contains the shared electrical, processor, memory-interface, I/O, and package information needed for this part. When interpreting the document, select the XC7Z030 device, FFG676 package, -3 speed grade, and E temperature-grade columns rather than data for another Zynq model.
Where can I find the XC7Z030-3FFG676E pinout?
The official pin assignments are published in the AMD Zynq-7000 package device pinout files and the XC7Z30-FBG676/FFG676 package placement diagram. Use those documents for PCB ball assignment and differential-pair routing. The 676-ball package is too large to reproduce reliably as a complete inline list, so use the manufacturer placement diagram as the authoritative source for every ball location.
How much does the XC7Z030-3FFG676E cost?
The current unit price is presented through the Request a Quote form on this page, where the available commercial terms can be reviewed for the exact quantity and delivery requirement. The manufacturer listing identifies the minimum order quantity as one piece and reports a 16-week lead time. Submit the required quantity, date code preference, and target delivery schedule with the quote request.
Is XC7Z030-3FFG676E in stock and what is the lead time?
Stock availability for this large programmable SoC changes by region, quantity, and date code, so confirm the current allocation through the Request a Quote form on this page. The manufacturer product listing reports a 16-week lead time and a minimum order quantity of one piece. For production planning, request a dated supply commitment rather than relying on a single distributor inventory snapshot.
Where can I buy XC7Z030-3FFG676E online?
Use the Request a Quote form on this page to request the AMD XC7Z030-3FFG676E with your required quantity, date code, and delivery location. The form supports a direct commercial request for this exact FFG676 device. Confirm traceable authorized-channel sourcing, packing requirements, and the committed lead time before releasing a purchase order.
What is the best drop-in replacement for XC7Z030-3FFG676E?
The closest drop-in candidate is the XC7Z030-3FFG676C because it preserves the -3 speed grade and 676-ball FFG package while changing only the temperature-grade designation. Confirm whether the lower commercial temperature range meets the product requirements. Same-package lower-speed options can be considered only after reviewing processor timing, memory timing, and environmental constraints.
Is XC7Z030-3FFG676E a suitable system-on-chip for industrial Ethernet?
The XC7Z030-3FFG676E is suitable for industrial Ethernet gateways when both programmable logic and a higher-performance processor system are required. Its dual Cortex-A9 configuration can run network services and control code, while the 125K logic-cell fabric can implement custom interfaces or hardware acceleration. Validate the required Ethernet PHY, deterministic I/O timing, thermal conditions, and software support for the selected protocol.
What can replace XC7Z030-3FFG676E?
The XC7Z030-3FFG676C is the closest same-package replacement for the XC7Z030-3FFG676E because it retains the 676-ball FFG package and -3 speed grade. The main tradeoff is the reduced commercial temperature range. Lower-speed FFG676 variants offer additional options, but their timing and temperature behavior must be validated against the original design.
Is XC7Z030-3FFG676E the same as XC7Z030-3FFG676C?
The XC7Z030-3FFG676E and XC7Z030-3FFG676C share the same Zynq-7000 device, 676-ball FFG package, and -3 speed class, but their temperature-grade identifiers differ. The E-grade target supports the extended-temperature designation, while the C-grade alternative is commercial temperature. They are not identical for applications whose environmental requirements exceed the commercial range.
How much power and heat does an XC7Z030-3FFG676E design generate?
Total device power depends on processor activity, FPGA utilization, I/O toggling, memory performance, supply voltage, and ambient temperature, so a single fixed power figure cannot be assigned to every design. Use the AMD power-estimation methodology with the exact clocking, utilization, and activity assumptions for the implementation. Validate the result in hardware because the 676-ball FCBGA requires a thermal path through the PCB and enclosure.

Data referensi engineering untuk XC7Z030-3FFG676E — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose XC7Z030-3FFG676E when the design needs the higher -3 speed class, the E extended-temperature designation, and the processing capacity of 125K Kintex-7 logic cells plus dual Cortex-A9 cores. XC7Z030-3FFG676C is the closest functional substitution because it preserves the package and speed grade, but it is limited to the commercial temperature designation. XC7Z030-2FFG676I or XC7Z030-2FFG676C can reduce cost when implementation timing has enough margin, although the lower speed grade requires revalidation. XC7Z030-1FFG676I and XC7Z030-1FFG676C are the least direct choices because they lose two speed classes relative to the target. For every migration, confirm the 676-ball FFG676 footprint, memory timing, fabric timing, configuration data, operating temperature, and toolchain support. Do not treat other Zynq-7000 packages as drop-in options because their ball patterns and board requirements differ.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini XC7Z030-3FFG676C XC7Z030-2FFG676I XC7Z030-1FFG676I XC7Z030-2FFG676C XC7Z030-1FFG676C
Brand AMD AMD AMD AMD AMD AMD
Package 676-ball FCBGA (FFG676, 27 x 27 mm) 676-ball FCBGA (FFG676, 27 x 27 mm) 676-ball FCBGA (FFG676, 27 x 27 mm) 676-ball FCBGA (FFG676, 27 x 27 mm) 676-ball FCBGA (FFG676, 27 x 27 mm) 676-ball FCBGA (FFG676, 27 x 27 mm)
Device Type Zynq-7000 Kintex-7 system-on-chip Zynq-7000 Kintex-7 system-on-chip Zynq-7000 Kintex-7 system-on-chip Zynq-7000 Kintex-7 system-on-chip Zynq-7000 Kintex-7 system-on-chip Zynq-7000 Kintex-7 system-on-chip
FPGA Logic Cells 125K logic cells 125K logic cells 125K logic cells 125K logic cells 125K logic cells 125K logic cells
Processor Configuration Dual ARM Cortex-A9 MPCore Dual ARM Cortex-A9 MPCore Dual ARM Cortex-A9 MPCore Dual ARM Cortex-A9 MPCore Dual ARM Cortex-A9 MPCore Dual ARM Cortex-A9 MPCore
Maximum Processor Frequency 1 GHz 1 GHz 1 GHz 1 GHz 1 GHz 1 GHz
Speed Grade -3 -3 -2 -1 -2 -1
Temperature Grade E extended-temperature designation C commercial-temperature designation I industrial-temperature designation I industrial-temperature designation C commercial-temperature designation C commercial-temperature designation
Manufacturing Technology 28 nm 28 nm 28 nm 28 nm 28 nm 28 nm
Debug Support CoreSight CoreSight CoreSight CoreSight CoreSight CoreSight

Diferensiator Kunci

  • Closest same-package option preserves the target speed class (vsXC7Z030-3FFG676C)
  • Higher performance class than the lower-speed industrial alternative (vsXC7Z030-2FFG676I)
  • Extended-temperature designation versus commercial-grade alternatives (vsXC7Z030-2FFG676C)

Catatan Desain

Treat the 676-ball FCBGA as a major thermal-design element rather than a conventional small IC. Estimate power using the AMD device power-estimation methodology with the final processor utilization, fabric activity, memory traffic, I/O toggle rates, clocking, and supply voltage. Compare the estimated junction-temperature result with the device limit, then provide copper planes, thermal vias, and enclosure heat-spreading structures. Validate the assembled board under worst-case ambient and activity because board construction can change thermal resistance significantly.

Design the PCB stack-up, power distribution, and escape routing around the 676-ball FCBGA rather than adapting a smaller QFP layout. Follow the AMD package placement diagram for every ball and keep high-speed memory and transceiver routing short, continuous, and impedance controlled. Provide dense decoupling directly beneath the device, maintain the recommended layer transitions, and route high-current supplies with multiple vias. Complete signal-integrity and power-integrity simulation using the actual board stack-up before fabrication.

A Zynq-7000 substitution must match the package code, speed grade, temperature grade, and bitstream configuration. FFG676 alternatives share the large 676-ball footprint, but FBG676, SBG485, and other package codes do not provide a direct PCB drop-in path even if their logic capacity is similar. Before substituting a lower speed grade, rerun implementation timing for processor, memory, fabric, and I/O paths and reconfirm the operating temperature range. Do not reuse a bitstream without confirming tool, device ID, and configuration support.

Separate synchronous clock, high-speed memory, serial transceiver, and general I/O routing regions where practical, while maintaining the exact layer and reference-plane transitions specified in the AMD design guidance. Keep CoreSight, configuration, and programming interfaces accessible for boundary scan and debug. Use the AMD Zynq-7000 package device pinout files to verify ball assignments and preserve clearances around power, ground, and configuration pins.

Informasi Konformitas

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The component listing identifies the device as RoHS3 compliant. No separate REACH, halogen-free, conflict-minerals, or AEC-Q100 qualification result was identified for this exact MPN.

Pencarian Terkait

xc7z030 3ffg676e xc7z030 2ffg676i xc7z030 1ffg676i xc7z030 1fbg676i xc7z030 2fbg676i xc7z030 1sbg485i xc7z030 2sbg485i XC7Z030-3FFG676E datasheet XC7Z030-3FFG676E pinout XC7Z030-3FFG676E FFG676 package AMD XC7Z030-3FFG676E XC7Z030-3FFG676E drop-in replacement XC7Z030-3FFG676E price XC7Z030-3FFG676E lead time XC7Z030-3FFG676E industrial Ethernet

Komponen dan Istilah Terkait

AMD AMD Xilinx XC7Z030-3FFG676E XC7Z030-3FFG676C XC7Z030-2FFG676I XC7Z030-1FFG676I XC7Z030-2FFG676C XC7Z030-1FFG676C Zynq-7000 Kintex-7 system-on-chip FPGA CPLD programmable logic ARM Cortex-A9 MPCore CoreSight FCBGA FFG676 package 28 nm process 125K logic cells industrial Ethernet gateway machine vision software-defined radio RoHS3
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ