XC7Z030-2FBG484E - 800MHz Dual-Core Zynq SoC | AMD
MPN: XC7Z030-2FBG484E ✓ AktifXC7Z030-2FBG484E Ringkasan
A Zynq-7000 SoC is a heterogeneous programmable device that merges an ARM microprocessor subsystem with FPGA fabric on one silicon die. This system-on-chip hierarchy connects Arm Cortex-A9 processing, CoreSight debug support, programmable logic, dedicated DSP resources, memory interfaces, and high-speed I/O. Integrating these blocks reduces component count and allows software-controlled logic to respond to processor events without conventional external-FPGA communication overhead.
Principal features include dual Arm Cortex-A9 MPCore processors, 800 MHz processing, 125K Kintex-7 logic cells, 400 DSP slices, CoreSight debug capability, and secure boot support. The 484-FCBGA package provides a high pin count for memory, networking, video, control, and industrial interface requirements. The E ordering suffix identifies the target part's extended-temperature configuration, while the -2 designation identifies its associated speed grade.
The device's architecture allows a Linux-capable processor to manage operating-system workloads while FPGA logic handles time-critical data movement, filtering, image processing, protocol termination, or sensor acquisition. Dedicated DSP resources can accelerate fixed-point and floating-point operations without requiring a separate FPGA or DSP package. Programmable logic can also implement custom accelerators and deterministic I/O paths beside the processor subsystem.
Typical applications include industrial machine vision, industrial control, medical imaging, networked communications, edge processing, robotics, and embedded test equipment. Its combination of 800 MHz Arm processing and 125K logic cells is especially useful where control software must coexist with parallel hardware pipelines. Secure boot is valuable for production systems that require controlled firmware and bitstream authorization.
PCB design must follow the AMD package pinout, power, decoupling, and ball-grid-layout requirements carefully. A 484-FCBGA device requires a matched land pattern, controlled escape routing, and adequate power and ground-plane distribution. Use the manufacturer's package placement diagram and package device pinout files when assigning balls and validating continuity.
This page combines the confirmed processor, logic, package, DSP, and feature data with practical selection guidance and engineering-focused comparisons. It also identifies temperature-grade and speed-grade alternatives in the same 484-FCBGA land pattern, helping engineers distinguish a genuine board-compatible substitution from an upgrade requiring different hardware or timing constraints.
Alternatif penggantian untuk XC7Z030-2FBG484E — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian XC7Z030-2FBG484E (sama faktor bentuk dan footprint) — berbeda di dalam Device Type, Package, Processor Core, Speed Grade.
XC7Z030-2FBG484I
✅ Drop-InKontak untuk harga
Lihat Datasheet →XC7Z030-2FBG484C
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
XC7Z030-3FBG484E
✅ Drop-InKontak untuk harga
Lihat Datasheet →XC7Z030-L2FBG484I
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
XC7Z030-1FBG484C
✅ Drop-InKontak untuk harga
Lihat Datasheet →XC7Z030-2FBG484E Rating Maksimal & Karakteristik Listrik
| Device Type | Zynq-7000 Kintex-7 system-on-chip |
| Processor Core | Dual Arm Cortex-A9 MPCore |
| Processor Frequency | 800 MHz |
| FPGA Logic Cells | 125K logic cells |
| DSP Slices | 400 DSP slices |
| Debug Support | CoreSight |
| Secure Boot | Supported |
| Paket | 484-FCBGA, 23 x 23 mm |
| Jumlah Pin | 484 pins |
| Tipe Mounting | Surface mount |
| Processor Supply | 1.2 V |
| I/O Supply | 3.3 V |
| Processor Architecture | 32-bit Arm Cortex-A9 with Thumb-2 |
| Temperature Grade | Extended temperature |
| Speed Grade | -2 |
| Programmable Logic Family | Kintex-7 |
XC7Z030-2FBG484E 484-fcbga, 23 x 23 mm Diamant Konfigurasi Panduan
Konfigurasi pin untuk XC7Z030-2FBG484E (484-fcbga, 23 x 23 mm pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.
Tidak ada data diatribut pin yang tersedia untuk XC7Z030-2FBG484E.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
XC7Z030-2FBG484E cocok untuk 6 aplikasis: Industrial Machine Vision, Industrial Control Systems, Medical Imaging Equipment, Networked Communications Equipment, Robotics and Automation, Embedded Edge Processing.
Industrial Machine Vision
The XC7Z030-2FBG484E fits machine-vision controllers that must combine camera-interface logic with higher-level operating-system software. Its two 800 MHz Arm Cortex-A9 cores can execute control, calibration, networking, and image-management tasks, while 125K Kintex-7 logic cells can implement parallel pixel acquisition, thresholding, and data movement. The 400 DSP slices provide additional arithmetic capacity for filtering and other fixed-point processing. Placing acquisition and preprocessing pipelines in programmable logic reduces the load on the Arm subsystem and creates a deterministic path from sensor data to memory or network transmission.
Direkomendasikan
Industrial Control Systems
XC7Z030-2FBG484E is appropriate for industrial controllers requiring deterministic I/O, flexible communication interfaces, and a processor for supervisory control. The 800 MHz dual-core Arm subsystem can run protocols, diagnostics, configuration logic, and control algorithms, while FPGA fabric can handle encoder capture, pulse timing, isolated-interface conditioning, or real-time interlocks. Its 125K logic cells allow dedicated interfaces to coexist with the processor subsystem without relying on a separate FPGA. The extended-temperature E configuration should be checked against the enclosure temperature and worst-case operating conditions.
Direkomendasikan
Medical Imaging Equipment
The XC7Z030-2FBG484E can support medical imaging controllers that divide acquisition, processing, and user-interface workloads between programmable logic and software. Its dual Arm Cortex-A9 cores provide resources for operating-system tasks, device control, networking, and data management, while 125K logic cells and 400 DSP slices can accelerate parallel pixel and signal processing. Implementing preprocessing directly in FPGA fabric can shorten the path between a sensor and processing memory. For connected medical equipment, secure boot provides a mechanism for controlling firmware and bitstream authorization, subject to the complete product security architecture.
Direkomendasikan
Networked Communications Equipment
XC7Z030-2FBG484E is suitable for embedded networking equipment requiring packet processing, protocol termination, and application-level control in one device. Arm cores can manage configuration, management planes, and higher-level protocols, while FPGA logic can implement high-rate packet classification, queues, framing, and custom serialization paths. The combination of 125K logic cells and an 800 MHz processor supports split workloads without an external communication FPGA. Interface selection, DDR routing, clocking, and I/O timing must be completed early because the large BGA package demands careful power, escape-routing, and signal-integrity planning.
Direkomendasikan
Robotics and Automation
The XC7Z030-2FBG484E fits robotics controllers that coordinate machine vision, motion control, sensors, and safety-related supervisory functions. The Arm subsystem can execute trajectory planning, device management, and user-interface tasks, while programmable logic can implement deterministic motor-control loops, encoder interfaces, and real-time sensor fusion. Its two processor cores can isolate communication and control functions, and the 400 DSP slices support arithmetic-heavy acceleration. Because timing and thermal behavior change with logic utilization and processor activity, finalize resource allocation and validate worst-case timing against the robot's motion-control deadlines.
Direkomendasikan
Embedded Edge Processing
XC7Z030-2FBG484E supports edge-processing designs that need local computation without a separate processor and FPGA. The 800 MHz dual-core Arm platform can run application software, while 125K logic cells implement sensor ingestion, filtering, event detection, or data compression. Dedicated DSP slices can accelerate arithmetic operations and reduce processor utilization. Secure boot is useful when deployed systems must authorize deployed software and hardware bitstreams. The design should define power states, memory architecture, boot media, and update mechanisms early, because these decisions affect both board-area requirements and the device's operating workload.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk XC7Z030-2FBG484E — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | XC7Z030-2FBG484I | XC7Z030-2FBG484C | XC7Z030-3FBG484E | XC7Z030-L2FBG484I | XC7Z030-1FBG484C |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 484-FCBGA (23 x 23 mm) | 484-FCBGA (23 x 23 mm) | 484-FCBGA (23 x 23 mm) | 484-FCBGA | 484-FCBGA (23 x 23 mm) | 484-FCBGA |
| Processor | Dual Arm Cortex-A9 MPCore | Dual Arm Cortex-A9 MPCore | Dual Arm Cortex-A9 MPCore | Dual Arm Cortex-A9 | Dual Arm Cortex-A9 MPCore | Arm Cortex-A9 |
| FPGA Family | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 | Zynq-7000 Kintex-7 |
| Ordering Grade | -2, E temperature suffix | -2, I temperature suffix | -2, C temperature suffix | -3, E temperature suffix | L2, I temperature suffix | -1, C temperature suffix |
Diferensiator Kunci
- Higher processor performance than the -1 package-compatible option (vsXC7Z030-1FBG484C)
- Extended-temperature ordering configuration (vsXC7Z030-2FBG484C)
- Retains the full 125K-logic-cell Kintex-7 fabric (vsXC7Z030-2FBG484I)
- Higher speed-grade option in the same package family (vsXC7Z030-2FBG484E)
Catatan Desain
Use the AMD XC7Z30-FBG484 package-placement diagram and official Zynq 7000 package-device pinout files as the controlling references for all 484 ball assignments. The package library used by this page does not contain an exact 484-FCBGA SVG key, so a generic package image must not be used for PCB routing. Confirm escape-routing geometry, via construction, solder-mask and paste design, assembly inspection access, and footprint tolerances with the manufacturer's package design guidance.
Plan the 1.2 V processor and 3.3 V I/O supplies as separate distribution domains with local bulk and high-frequency decoupling at the device and supporting circuitry. Before power-up, estimate worst-case consumption from processor activity, FPGA utilization, DSP usage, I/O loading, and temperature. Use AMD's power-estimation guidance for the selected design configuration, then verify voltage droop and sequencing on hardware rather than relying on nominal supply values.
Thermal performance depends on the actual processor load, programmable-logic switching activity, ambient temperature, board copper, and enclosure airflow. A 484-FCBGA offers a large thermal escape area, but exposed-pad connections and distributed power and ground balls still require careful PCB construction. Estimate junction temperature with the package thermal model and final board stack-up, then perform power testing because processor-only and full fabric workloads can produce very different results.
Treat processor, memory, transceiver, and high-speed I/O routing as a complete constraint set rather than routing only by nominal signal classification. Maintain continuous reference planes, control return paths, length matching for external interfaces, and appropriate separation between aggressors and sensitive inputs. DDR memory and high-speed transceiver interfaces require especially careful escape routing from the BGA array; validate the final stack-up with the manufacturer's constraints and appropriate signal-integrity simulation.
Do not treat a shared package suffix as proof that every XC7Z030 ordering code is an interchangeable drop-in. The I, C, E, L2, -1, -2, and -3 designations can represent temperature, speed, or other ordering differences. Before substitution, compare the complete AMD ordering guide, electrical limits, operating-temperature requirements, resource limits, speed grade, power characteristics, and the timing implications of replacing a characterized device.
Informasi Konformitas
No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were identified for this exact MPN in the manufacturer and distributor information. The E suffix denotes the device ordering temperature configuration and should not be interpreted as an automotive qualification.