AMD

XC7Z035-1FBG676I - 667MHz Zynq SoC FPGA | AMD

MPN: XC7Z035-1FBG676I ✓ 啟用中
676-FCBGA, 27 x 27 mm Package 667 MHz Speed
MOQ: 1 |

XC7Z035-1FBG676I 概覽

The AMD XC7Z035-1FBG676I is a Zynq-7000 adaptive system-on-chip integrating a dual-core Arm Cortex-A9 MPCore processing system with CoreSight debug, a Kintex-7 FPGA fabric, 275,000 logic cells, and a 667 MHz processor clock in a 676-FCBGA package measuring 27 x 27 mm. Its operating temperature range is -40°C to +100°C, and the industrial suffix identifies a temperature-qualified assembly for demanding embedded and industrial systems.

A Zynq-7000 SoC belongs to the FPGA & CPLD hierarchy and combines a hardware adaptive SoC architecture with programmable logic. Unlike a standalone microcontroller, the device allows ARM software and FPGA fabric to operate within one chip while communicating through dedicated interfaces. This heterogeneous architecture supports concurrent control processing, hardware data processing, signal acquisition, communications, and real-time decision-making without requiring separate processor and FPGA packages.

The device provides approximately 275,000 logic cells and 250 I/O in its largest configuration. A 667 MHz Cortex-A9 processor supports the embedded software side, while the Kintex-7 fabric handles parallel logic, high-speed interface functions, protocol acceleration, and timing-sensitive workloads. CoreSight provides integrated visibility for debugging the processing system, and the Zynq architecture supports a combination of Linux, real-time operating systems, bare-metal firmware, and hardware-assisted pipelines.

The XC7Z035-1FBG676I uses a 676-ball flip-chip BGA package, making it appropriate for dense multilayer PCB layouts with high-density escape routing and controlled impedance requirements. Its industrial temperature qualification covers applications operating from -40°C through +100°C. The package combines the Arm processing system, programmable logic, memory interfaces, and general-purpose I/O in a single 27 x 27 mm component.

Typical uses include industrial machine vision, test and measurement equipment, industrial networking, embedded video processing, communications infrastructure, and control systems that benefit from parallel hardware acceleration. Designers can assign time-critical filtering, protocol conversion, data acquisition, or interface bridging to the programmable logic while the Arm cores execute control software, operating systems, communications stacks, and supervisory functions.

PCB implementation requires careful BGA escape routing, power and ground-plane design, decoupling, thermal management, and differential-pair routing. Use the AMD Zynq-7000 package pinout files referenced in the design documentation to assign every ball correctly. Confirm the selected DDR memory interface, transceivers, bank voltages, configuration method, and clocking requirements before schematic capture.

This page combines the confirmed device identity, package, operating-temperature, lifecycle, and environmental information with practical implementation guidance. It also identifies same-footprint Zynq-7000 ordering options for engineering comparison while distinguishing speed, temperature, and extended-temperature qualification changes that must be checked before substitution.

直接替換替代品,適用於 XC7Z035-1FBG676I — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: XC7Z035-1FBG676I (相同外形與佔位) — 差異在於 Package, Device Type, RoHS Status, Temperature Grade, Mounting Type.

AMD
Device Type: Zynq-7000 Kintex-7 programmable system-on-chip
Mounting Type: Surface-mount BGA
比較對象 XC7Z035-1FBG676I →
AMD
Package: 676-FCBGA (27 x 27 mm)
Device Type: Zynq-7000 All Programmable System-on-Chip
Temperature Grade: Industrial, -40C to +85C
比較對象 XC7Z035-1FBG676I →
AMD
Package: 676-FCBGA (27x27 mm)
RoHS Status: Compliant (RoHs Code Yes per Avaq)
Temperature Grade: Industrial (I suffix)
比較對象 XC7Z035-1FBG676I →
AMD
Package: 676-FCBGA (27x27 mm)
RoHS Status: Compliant
比較對象 XC7Z035-1FBG676I →

XC7Z035-1FBG676C

✅ 直接替換
AMD
📦 676-FCBGA (27 x 27 mm)
Zynq-7000 Kintex-7 programmable system-on-chip · Dual-core ARM Cortex-A9 MPCore · 667 MHz · CoreSight · Kintex-7 · 275K · 28 nm · 676-pin FCBGA

聯絡詢價

查看資料表 →

XC7Z035-2FBG676I

✅ 直接替換 ⚠️ 規格未經驗證
AMD
📦 676-FCBGA (27 x 27 mm)
Zynq-7000 All Programmable System-on-Chip · Dual-core ARM Cortex-A9 MPCore · 800 MHz · 275K logic cells · Kintex-7 · 676-FCBGA (27 x 27 mm) · Surface mount · -2

聯絡詢價

查看資料表 →

XC7Z035-L2FBG676I

✅ 直接替換
📦 676-FCBGA (27 x 27 mm)
Same device family and 676-FCBGA footprint; L2 ordering code changes speed or qualification characteristics relative to the -1FBG676I target.

📋 參考替代品(不在目錄中)

XC7Z035-2FBG676C

✅ 直接替換 ⚠️ 規格未經驗證
📦 676-FCBGA (27 x 27 mm)
Same Zynq-7000 device and 676-FCBGA footprint; -2 speed grade and commercial C temperature grade differ from the -1FBG676I target.

📋 參考替代品(不在目錄中)

XC7Z035-L2FBG676C

✅ 直接替換 ⚠️ 規格未經驗證
📦 676-FCBGA (27 x 27 mm)
Same Zynq-7000 family and 676-FCBGA footprint; L2 and C suffixes change performance and temperature characteristics relative to the industrial -1 target.

📋 參考替代品(不在目錄中)

XC7Z035-1FBG676I 最大額定值與電氣特性

Device Type Zynq-7000 adaptive SoC with Kintex-7 FPGA fabric
Processor Core Dual-core Arm Cortex-A9 MPCore
Processor Clock 667 MHz
FPGA Logic Cells Approximately 275,000 cells
FPGA Family Kintex-7
Process Technology 28 nm
Debug Support CoreSight
General-Purpose I/O 250 I/O
封裝 676-FCBGA, 27 x 27 mm
Package Type Flip-Chip Ball Grid Array
安裝類型 Surface Mount
工作溫度 -40°C to +100°C
Temperature Grade Industrial
生命週期狀態 Active
RoHS 狀態 ROHS3 Compliant
Lead Time 16 weeks
Minimum Order Quantity 1 unit
Packaging Tray

XC7Z035-1FBG676I flip-chip ball grid array 腳位配置指南

XC7Z035-1FBG676I(flip-chip ball grid array 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。

XC7Z035-1FBG676I 的 flip-chip ball grid array 封裝腳位圖

無詳細腳位定義資料: XC7Z035-1FBG676I.

請參閱 資料表 以查看完整腳位配置。

典型應用

XC7Z035-1FBG676I 適用於 6 應用s: Industrial Machine Vision, Test and Measurement Equipment, Industrial Networking Gateway, Communications Infrastructure, Embedded Video Processing, Real-Time Control System.

🏭

Industrial Machine Vision

The XC7Z035-1FBG676I fits industrial machine-vision controllers because it combines a 667 MHz dual-core Arm Cortex-A9 processing system with a Kintex-7 fabric containing approximately 275,000 logic cells. The Arm cores can run operating-system-level control, image management, and communications, while programmable logic can accelerate pixel formatting, thresholding, filtering, and frame-buffer operations. Its -40°C to +100°C operating range supports factory environments where consumer-temperature devices may be unsuitable. The 676-FCBGA package demands a multilayer PCB, controlled-impedance routing, solid decoupling, and a thermal design that accounts for simultaneous processor and FPGA activity.

🧰

Test and Measurement Equipment

In automated test equipment, the XC7Z035-1FBG676I can divide responsibilities between firmware and programmable hardware. The dual-core Arm Cortex-A9 at 667 MHz supports instrument control, user interfaces, data handling, and real-time scheduling, while the 275,000-cell Kintex-7 fabric can implement parallel acquisition, pattern generation, timing, or digital signal processing pipelines. This arrangement reduces the need to transfer every high-speed operation through a processor bus. The industrial -40°C to +100°C rating is useful for laboratory and production-floor equipment. The design must still account for FCBGA power integrity, high-speed clock routing, DDR memory constraints, and heat spreading.

🌐

Industrial Networking Gateway

The XC7Z035-1FBG676I is suitable for an industrial networking gateway that must handle software protocol stacks and hardware-intensive packet processing concurrently. Arm Cortex-A9 cores can run networking services, management interfaces, security functions, and configuration logic, while the FPGA fabric can accelerate packet classification, compression, encryption-related data movement, or custom interfaces. Its 667 MHz processor clock supports responsive control-plane work, and the industrial temperature range fits factory-floor gateways. The 676-FCBGA implementation requires careful partitioning between processor peripherals and PL, deterministic clocking, low-noise power distribution, and layout verification against the package pinout files.

📡

Communications Infrastructure

For communications infrastructure, the XC7Z035-1FBG676I provides a heterogeneous combination of 667 MHz Arm processing and approximately 275,000 programmable logic cells. The processor side can manage protocol stacks, diagnostics, and control-plane traffic, while programmable logic can implement custom framing, time stamping, interface conversion, or low-latency data paths. This flexibility is valuable in radio, baseband, and specialized network equipment where product differentiation often extends beyond standard processor peripherals. The industrial rating supports controlled environments, and the 28 nm Zynq implementation can reduce package count compared with separate processor and FPGA designs. Timing closure and thermal analysis remain essential for sustained high-utilization operation.

📺

Embedded Video Processing

The XC7Z035-1FBG676I can accelerate embedded video workloads by assigning pixel pipelines and format conversion to Kintex-7 programmable logic while the dual-core Cortex-A9 system handles control, buffering, networking, and application software. Approximately 275,000 logic cells provide space for parallel datapaths, while the 667 MHz Arm cores can supervise multiple streams and peripheral functions. Its -40°C to +100°C rating is appropriate for industrial monitoring equipment and cameras deployed outside controlled room temperatures. A practical implementation requires compatible video interface devices, DDR memory planning, clock-domain crossing, bounded-latency design, and an FCBGA layout that maintains signal and power integrity.

⚙️

Real-Time Control System

The XC7Z035-1FBG676I supports real-time control systems that combine deterministic hardware response with a high-level operating environment. The Kintex-7 fabric can implement timers, state machines, sampling pipelines, motor-control peripherals, or custom sensor interfaces, while the 667 MHz dual-core Arm subsystem executes supervisory algorithms, diagnostics, and communications. Placing both functions on one device can reduce board area and avoid transferring time-critical events over a chip-to-chip interface. The industrial temperature range covers demanding control cabinets and mobile equipment. Design effort should include worst-case latency analysis, DDR and cache behavior, clock-domain constraints, thermal verification, and formal checks of processor-to-PL interrupts and shared-memory transactions.

What are the key specifications of XC7Z035-1FBG676I that engineers should know?
The XC7Z035-1FBG676I combines a dual-core Arm Cortex-A9 MPCore processor running at 667 MHz with approximately 275,000 Kintex-7 FPGA logic cells in a 676-FCBGA package. According to the AMD product information and the manufacturer datasheet, it also provides 250 I/O, uses a 28 nm process, and is rated for -40°C to +100°C industrial operation. Its principal engineering advantage is the combination of programmable logic and an ARM-based processing system in one package.
What is the XC7Z035-1FBG676I and what is a Zynq-7000 SoC?
The XC7Z035-1FBG676I is an adaptive system-on-chip combining a dual-core Arm Cortex-A9 processing system, CoreSight debug, and a Kintex-7 FPGA fabric in one device. A Zynq-7000 SoC combines general-purpose embedded processing with programmable hardware in the FPGA & CPLD category. According to the AMD manufacturer datasheet, this allows software-controlled functions and parallel, timing-sensitive logic to share one package while communicating through dedicated on-chip resources.
What is the XC7Z035-1FBG676I pinout and package size?
The XC7Z035-1FBG676I uses a 676-FCBGA package measuring 27 x 27 mm. Use the AMD Zynq-7000 Package Device Pinout Files for the authoritative ball assignments and consult the pin-description tables in the manufacturer datasheet during PCB layout. The complete 676-ball list is not reproduced on this page. Pay particular attention to power, ground, configuration, clock, memory-interface, and high-speed differential balls because their connectivity requirements differ substantially from ordinary BGA I/O.
Where can I download the XC7Z035-1FBG676I datasheet PDF?
The XC7Z035-1FBG676I datasheet PDF can be accessed through the AMD documentation linked from the Octopart datasheet page. The manufacturer datasheet is the controlling document for electrical characteristics, package balls, memory interfaces, power sequencing, and configuration behavior. AMD also publishes Zynq-7000 package pinout files for design implementation. Verify the device marking and complete ordering code before applying information from a different speed-grade or temperature-grade datasheet revision.
Is XC7Z035-1FBG676I suitable for industrial applications?
Yes, the XC7Z035-1FBG676I is suitable for industrial applications because its published operating range is -40°C to +100°C. The industrial suffix and the listed lifecycle status of Active identify it as the industrial-temperature version of this Zynq-7000 device. According to the manufacturer datasheet, the complete system must also remain within the package, power, and FPGA operating limits. Confirm enclosure temperature, power-supply tolerance, and thermal performance for the final assembly.
Where can I buy XC7Z035-1FBG676I and what is its price?
Use the Request a Quote form on this page to request current XC7Z035-1FBG676I price, stock, and lead time for the exact 676-FCBGA industrial ordering code. The available listing indicates a minimum order quantity of one unit and a stated lead time of 16 weeks, but quotations should be confirmed at the time of order. Packaged pricing is displayed from structured marketplace data and is not repeated as a static figure in this technical FAQ.
Is XC7Z035-1FBG676I in stock?
Current XC7Z035-1FBG676I stock should be confirmed through the Request a Quote form on this page. The product is listed as active, but lifecycle status does not by itself guarantee immediate availability, especially for large FCBGA assemblies. The stated lead time is 16 weeks and the minimum order quantity is one unit. Supply status can change by package, date, and order quantity, so use the quote form rather than treating a listing snapshot as a guaranteed allocation.
What is the lead time and minimum order quantity for XC7Z035-1FBG676I?
The listed minimum order quantity for XC7Z035-1FBG676I is one unit, and the stated lead time is 16 weeks. Those figures apply to the exact AMD ordering code in a tray package. Request a formal quotation for a committed delivery schedule, current allocation, and any volume terms. Lead time can vary with device availability, production scheduling, and the number and configuration of boards being built.
XC7Z035-1FBG676I vs XC7Z035-2FBG676I: which is better for a design?
The XC7Z035-2FBG676I is the faster speed grade and is preferable when the design requires higher processing performance than the 667 MHz grade of the XC7Z035-1FBG676I. Both retain the same Zynq-7000 SoC architecture and 676-FCBGA footprint in the documented ordering codes. However, speed-grade changes can affect power, timing closure, memory margins, and thermal design. Select the grade using the complete AMD timing and power data rather than frequency alone.
When should I choose XC7Z035-1FBG676I over XC7Z035-1FBG676C?
Choose XC7Z035-1FBG676I when the product must support operation across -40°C to +100°C, because the target has an industrial temperature designation. XC7Z035-1FBG676C is the commercial-temperature option in the same device family and is not the correct choice when the ambient requirement exceeds its specified range. For either version, confirm complete package, speed, temperature, qualification, and lifecycle requirements before releasing a production BOM.
Is XC7Z035-1FBG676I the same as XC7Z035-L2FBG676I?
No, XC7Z035-1FBG676I and XC7Z035-L2FBG676I are related Zynq-7000 ordering codes but are not identical. The target is the 667 MHz industrial-temperature -1FBG676I configuration, while the L2 code identifies a different speed or qualification option. Although both may use the same FCBGA family, the manufacturer suffix controls speed, temperature, and qualification characteristics. Validate those differences against the AMD ordering guide and timing data before substitution.
What is the best drop-in replacement for XC7Z035-1FBG676I?
The closest same-footprint starting point is XC7Z035-2FBG676I, which retains the 676-FCBGA format while changing the speed grade. It is not an unconditional replacement because performance, power, timing margins, and possibly temperature or qualification details differ. A production substitution should preserve the required industrial temperature range, FPGA resources, memory interfaces, transceiver needs, package ballout, and Vivado device constraints. Request a formal cross-reference and engineering approval before using any alternate ordering code.
Can XC7Z035-1FBG676C replace XC7Z035-1FBG676I?
XC7Z035-1FBG676C can share the Zynq-7000 device and 676-FCBGA format, but it is a commercial-temperature alternative rather than an industrial drop-in replacement. The target XC7Z035-1FBG676I is specified for -40°C to +100°C, whereas the C suffix denotes a different temperature grade. Use the C version only when the finished product remains within its commercial-temperature limits and the AMD ordering information confirms that no other required characteristics differ.
What is the best AMD equivalent for XC7Z035-1FBG676I?
AMD is the appropriate manufacturer to use when seeking an XC7Z035 equivalent, and the XC7Z035-2FBG676I is a same-device, faster-speed option in the 676-FCBGA family. The appropriate exact substitute depends on whether your design can accommodate the higher speed grade and associated power and timing implications. Zynq-7000 members with different logic-cell counts, package balls, or I/O arrangements are not drop-in replacements. Validate the exact suffix against AMD documentation.
What design considerations matter for a 676-FCBGA XC7Z035 implementation?
The XC7Z035-1FBG676I requires a dense multilayer PCB with careful BGA escape routing, continuous power and ground planes, local decoupling, controlled-impedance routing, and a thermal design appropriate for a 28 nm FPGA SoC. Use AMD package pinout files for every ball assignment and follow the manufacturer datasheet for supply sequencing and I/O standards. The Arm cores, programmable logic, DDR interfaces, and high-speed transceivers should be planned together because their power domains and routing constraints interact.

工程參考資料,適用於 XC7Z035-1FBG676I — 比較、設計指引及合規資訊。

選型指南

Choose the XC7Z035-1FBG676I when the design needs a Zynq-7000 device with a confirmed 667 MHz dual-core Arm Cortex-A9 processor, approximately 275,000 Kintex-7 logic cells, and operation from -40°C to +100°C. It is particularly suitable for industrial image processing, test equipment, communications, and real-time control systems that benefit from combining ARM software with programmable logic. Select XC7Z035-1FBG676C only when a commercial-temperature grade is acceptable. Select XC7Z035-2FBG676I when the higher speed grade provides a justified performance improvement and the power, timing, and thermal budgets remain acceptable. Evaluate XC7Z035-L2FBG676I when its specific speed or qualification characteristics meet the program requirements. All listed alternatives use the XC7Z035 family and 676-FCBGA format, but suffix differences are not interchangeable: verify the complete ordering code, temperature range, speed grade, qualification, Vivado support, timing, and power before approving a substitution.

與替代品比較

參數 本產品 XC7Z035-1FBG676C XC7Z035-2FBG676I XC7Z035-L2FBG676I XC7Z035-2FBG676C XC7Z035-L2FBG676C
Brand AMD AMD AMD AMD AMD AMD
Package 676-FCBGA (27 x 27 mm) 676-FCBGA (27 x 27 mm) 676-FCBGA (27 x 27 mm) 676-FCBGA (27 x 27 mm) 676-FCBGA (27 x 27 mm) 676-FCBGA (27 x 27 mm)
Speed Grade -1 -1 -2 L2 -2 L2
Processor Dual-core Arm Cortex-A9 MPCore Dual-core Arm Cortex-A9 MPCore Dual-core Arm Cortex-A9 MPCore Dual-core Arm Cortex-A9 MPCore Dual-core Arm Cortex-A9 MPCore Dual-core Arm Cortex-A9 MPCore
FPGA Fabric Kintex-7 Kintex-7 Kintex-7 Kintex-7 Kintex-7 Kintex-7
Process Technology 28 nm 28 nm 28 nm 28 nm 28 nm 28 nm

主要差異化特點

  • Industrial temperature coverage (對比XC7Z035-1FBG676C)
  • 667 MHz Arm processing performance (對比XC7Z035-2FBG676I)
  • Single-package heterogeneous processing (對比XC7Z035-L2FBG676I)

設計說明

Plan the XC7Z035-1FBG676I as a high-density FCBGA design with uninterrupted power planes, local decoupling, via-in-pad or microvia fanout where supported, and controlled-impedance escape routing. Begin with the AMD Zynq-7000 Package Device Pinout Files, then cross-check every ball against the manufacturer datasheet. Keep high-speed clocks and memory interfaces away from noisy power-regulator switching nodes, and include test points for configuration, reset, clock, and debug signals.

Estimate thermal performance at the maximum ambient temperature and the highest expected processor-plus-FPGA utilization rather than using nominal clock activity alone. The XC7Z035-1FBG676I supports -40°C to +100°C operation, but package dissipation depends on resource use, I/O activity, memory traffic, and voltage. Use the AMD power-estimation methodology and the PCB thermal model, preserve continuous copper beneath the BGA where the package permits, and add heat-spreader or heatsink provisions when the calculated junction margin is insufficient.

Implement processor, DDR, and transceiver interfaces as a complete signal-integrity and power-integrity exercise. Use the manufacturer's recommended topology, via geometry, layer transitions, length relationships, and I/O standards, and verify the final stack-up with field solvers or measured coupons. The 28 nm SoC may demand stricter switching-noise control than simpler mixed-signal systems, so separate sensitive analog supplies where applicable and validate DDR eye margins, clock jitter, and simultaneous-switching-noise behavior.

Do not substitute a Zynq-7000 ordering code based only on the FBG676 package suffix. The -1, -2, L2, I, C, and E characters encode different speed, temperature, or qualification requirements. When considering XC7Z035-1FBG676C, XC7Z035-2FBG676I, or an L2 option, compare the complete AMD ordering guide, Vivado device support, timing limits, power behavior, and required temperature range. A footprint match alone does not establish functional or qualification equivalence.

合規資訊

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The product is listed as ROHS3 Compliant. REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification status are not stated in the product information and remain unknown.

資料驗證日期: 2026-11-14 — 資料由 XAIPART 元件工程團隊驗證及整理

相關搜尋

xc7z035 1fbg676i xc7z035 l2fbg676i xc7z035 2ffg676i xc7z035 1ffg676i xc7z035 2ffg900i xc7z035 1fbg676c xc7z035 2fbg676i xc7z035 l2ffg676i xc7z035 1ffg900i xc7z035 3ffg676e XC7Z035-1FBG676I datasheet XC7Z035-1FBG676I pinout XC7Z035-1FBG676I equivalent XC7Z035-1FBG676I replacement AMD XC7Z035-1FBG676I

相關元件與詞彙

AMD XC7Z035-1FBG676I XC7Z035-1FBG676C XC7Z035-2FBG676I XC7Z035-L2FBG676I Zynq-7000 adaptive system-on-chip FPGA CPLD programmable logic Arm Cortex-A9 MPCore CoreSight Kintex-7 667 MHz 275,000 logic cells 28 nm process 676-FCBGA flip-chip ball grid array surface mount industrial temperature grade DDR memory interface machine vision industrial networking embedded video processing real-time control
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情