XMC1100T016X0016AAXUMA1 - 32MHz Cortex-M0 16KB Flash MCU | Infineon
MPN: XMC1100T016X0016AAXUMA1 ✓ AktifXMC1100T016X0016AAXUMA1 Ringkasan
An ARM Cortex-M0 microcontroller is a compact reduced-instruction-set processor architecture used for embedded control systems. In the hierarchy of electronic components, it is a microcontroller, then an integrated circuit, then a semiconductor. XMC devices are commonly used for industrial sensing, actuator control, communication modules, and low-cost control boards where a small device footprint and broad peripheral integration reduce board complexity.
Key features of the XMC1100T016X0016AAXUMA1 include a 32 MHz operating frequency, 16 KB Flash memory, 16 KB of RAM, and connectivity options identified for the XMC1100 family including I2C, LIN, SPI, and UART/USART. The 16-pin PG-TSSOP-16-8 package is suitable for space-constrained designs. The integrated serial interfaces allow the MCU to communicate with sensors, transceivers, displays, and other embedded controllers without requiring multiple external interface components.
The XMC1100 architecture is based on the ARM Cortex-M0 core, which provides a simple, deterministic execution model suitable for interrupt-driven and event-based control. The manufacturer’s XMC1100 datasheet covers electrical characteristics, physical characteristics, ordering designations, peripherals, and the complete device family. The A-step designation and the AA ordering code are part of the exact device ordering information, while the X0016 code identifies the 16 KB Flash configuration used in this part.
Typical applications include industrial sensor nodes, motor and actuator control, LIN-connected automotive and industrial subsystems, communication transceivers, building automation, and compact embedded control platforms. The microcontroller can serve as the central controller in a sensor hub, translating measurements from analog or digital sensors and forwarding data through UART, SPI, or I2C. Its small package also makes it suitable for boards where connector density and copper area are limited.
When designing a PCB around this MCU, place decoupling capacitors close to the supply pins and route sensitive communications away from high-current switching nodes. Confirm the exact pin multiplexing, power pin arrangement, clock options, and peripheral availability against the manufacturer pin-description table and reference documentation for the selected ordering designation. Programming and debug support should be verified with the appropriate XMC1100-16 device support configuration before firmware deployment.
This product page combines the manufacturer’s XMC1100 datasheet information, exact ordering details, package characteristics, application guidance, and drop-in replacement analysis to support rapid component selection and PCB design. It is intended for engineers comparing memory capacity, core performance, interface availability, package compatibility, and lifecycle requirements.
Alternatif penggantian untuk XMC1100T016X0016AAXUMA1 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian XMC1100T016X0016AAXUMA1 (sama faktor bentuk dan footprint) — berbeda di dalam Product Type, Series.
XMC1100T016X0016ABXUMA1
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
XMC1100-T016F0016-AB
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
XMC1100-T016
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
XMC1100T016F0064AAXUMA1
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
XMC1100T016X0016AAXUMA1 Rating Maksimal & Karakteristik Listrik
| Product Type | ARM Cortex-M0 32-bit microcontroller |
| Core Architecture | ARM Cortex-M0 |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 16 KB (16K x 8) |
| RAM | 16 KB |
| Paket | PG-TSSOP-16-8, 16-pin |
| Series | XMC1000 industrial microcontroller series |
| Core Type | Single-core |
| Serial Interfaces | I2C, LINbus, SPI, UART/USART |
| Ordering Designation | XMC1100T016X0016AAXUMA1 |
| Step Designation | AB step |
| Program Memory | 16 KB embedded Flash |
| Data Memory | 16 KB RAM |
| Processor Architecture | 32-bit reduced-instruction-set architecture |
| Tipe Mounting | Surface mount |
| Package Pin Count | 16 pins |
XMC1100T016X0016AAXUMA1 16 pins Diamant Konfigurasi Panduan
Konfigurasi pin untuk XMC1100T016X0016AAXUMA1 (16 pins pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.
Tidak ada data diatribut pin yang tersedia untuk XMC1100T016X0016AAXUMA1.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
XMC1100T016X0016AAXUMA1 cocok untuk 6 aplikasis: Industrial Sensor Nodes, LIN-Connected Actuator Control, Communication Module Control, Building Automation Endpoints, Motor and Relay Control, Compact Educational and Evaluation Boards.
Industrial Sensor Nodes
The XMC1100T016X0016AAXUMA1 fits compact industrial sensor nodes that combine acquisition, local control, and serial reporting. Its ARM Cortex-M0 core runs at up to 32 MHz, while 16 KB of Flash and 16 KB of RAM provide space for a small embedded application. I2C and SPI can serve digital sensors, and UART/USART can connect the node to a gateway. The 16-pin PG-TSSOP-16-8 footprint supports board-space reduction, although developers should confirm peripheral pin multiplexing and power requirements against the manufacturer pin table before laying out the PCB.
Direkomendasikan
LIN-Connected Actuator Control
The XMC1100T016X0016AAXUMA1 is appropriate for small LIN-connected actuator controllers because the XMC1000 configuration includes LINbus alongside I2C, SPI, and UART/USART. A 32 MHz Cortex-M0 core can execute control logic and communicate with remote actuators while 16 KB RAM supports short task stacks, buffers, and communication data. The TSSOP-16 package helps minimize board area in distributed modules. Exact LIN functionality, interrupt behavior, and port configuration should be checked for the selected device derivative in the XMC1100 reference documentation.
Direkomendasikan
Communication Module Control
The XMC1100T016X0016AAXUMA1 can serve as the supervisory controller in a small communications module where an external radio or network device handles high-bandwidth traffic. The MCU uses UART/USART, SPI, or I2C for configuration, status, and control traffic, while the 32 MHz core handles framing and local state-machine updates. Its 16 KB Flash and 16 KB RAM suit compact firmware rather than heavy graphics or protocol stacks. Designers should allocate pins and test levels carefully because the available communications interfaces are multiplexed through the 16-pin package.
Direkomendasikan
Building Automation Endpoints
The XMC1100T016X0016AAXUMA1 suits low-cost building-automation endpoints that monitor inputs, operate simple relays or indicators, and report state over a serial network. Its 32-bit Cortex-M0 processing supports event-driven control, while the available I2C and UART/USART interfaces connect sensors and communications hardware without requiring a large external component count. The compact PG-TSSOP-16-8 package is useful in multi-zone panels. Verify supply-voltage tolerance, operating temperature, watchdog and peripheral availability, and all regulatory requirements for the completed building-control product.
Direkomendasikan
Motor and Relay Control
The XMC1100T016X0016AAXUMA1 can implement deterministic relay, solenoid, or small-motor sequencing where the controller must combine multiple digital inputs and outputs. Its 32 MHz Cortex-M0 core provides useful timing margin, and 16 KB RAM accommodates modest control state and communication buffers. PWM-capable ports and serial diagnostics should be confirmed in the manufacturer documentation before assigning a motor function. Because inductive and switching loads introduce transients, the completed design needs appropriate drivers, protection, grounding, and separation between motor paths and communication signals.
Direkomendasikan
Compact Educational and Evaluation Boards
The XMC1100T016X0016AAXUMA1 is useful for compact educational boards and embedded-control prototypes because it combines a widely supported ARM Cortex-M0 core, 16 KB Flash, and multiple serial interfaces in a small package. Students and engineers can use the 32 MHz processing capability for real-time exercises, and the XMC1100-16 device-support resources provide a defined target for compatible programming tools. Before creating a PCB, confirm debug signals, boot behavior, clock configuration, and exposed test points because a simplified educational board may not implement every feature of the production package.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk XMC1100T016X0016AAXUMA1 — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | XMC1100T016X0016ABXUMA1 | XMC1100-T016F0016-AB | XMC1100-T016 | XMC1100T016F0064AAXUMA1 |
|---|---|---|---|---|---|
| Package | PG-TSSOP-16-8 | PG-TSSOP-16-8 | TSSOP-16 | PG-TSSOP-16-8 family package | PG-TSSOP-16-8 |
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Core | ARM Cortex-M0 | ARM Cortex-M0 | ARM Cortex-M0 | ARM Cortex-M0 | ARM Cortex-M0 |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Ordering Step | AA | AB | AB | Base family designation | AA |
| Serial Connectivity | I2C, LINbus, SPI, UART/USART | XMC1100 family I2C, LINbus, SPI, UART/USART | XMC1100 family I2C, LINbus, SPI, UART/USART | XMC1100 family serial peripherals | XMC1100 family serial peripherals |
| Product Type | Industrial ARM Cortex-M0 microcontroller | Industrial ARM Cortex-M0 microcontroller | Industrial ARM Cortex-M0 microcontroller | Microcontroller | ARM Cortex-M0 microcontroller |
Diferensiator Kunci
- Provides the exact 16 KB Flash configuration in a compact 16-pin package (vsXMC1100T016F0064AAXUMA1)
- Targets the AA ordering configuration with 32 MHz ARM Cortex-M0 performance (vsXMC1100T016X0016ABXUMA1)
- Combines four named serial peripheral classes in a small MCU footprint (vsXMC1100-T016F0016-AB)
Catatan Desain
Route power and decoupling directly to the MCU rather than distributing them through long shared traces. Place the required input and bulk capacitors close to their corresponding supply pins, with a compact ground return beneath or beside the device. Keep the 16-pin TSSOP footprint free of accidental copper obstructions and verify the exposed assembly drawing, pin-one orientation, solder profile, and land pattern against the manufacturer package drawing.
Use the manufacturer pin-description table to construct the signal matrix before routing. I2C, SPI, UART/USART, LINbus, and port functions can share multiplexed pins, so reserving alternate functions may require firmware changes or a board respin. Confirm boot and debug assignments, clock pins, reset behavior, and ground references in the reference documentation, then label both PCB and firmware pin definitions with the same port and signal names.
Do not treat every XMC1100 ordering code as an interchangeable production part. The target uses an AA suffix, while documented alternatives use AB or base family designations; the F0064 alternative also reduces Flash from 16 KB to 6 KB. Validate step revision, memory size, temperature grade, qualification marking, pin multiplexing, and firmware image assumptions before releasing a substitution. A matching package alone does not establish complete product equivalence.
For serial links and external sensors, keep clock and data traces short, provide a continuous ground reference, and avoid routing communication signals parallel to switching-node edges or high-current relay traces. Add series damping only after signal-integrity measurements determine that it is required. For LIN or other physically longer interfaces, follow the applicable transceiver, termination, protection, and grounding recommendations from the system design and the manufacturer peripheral documentation.
Informasi Konformitas
The XMC1100 family is identified as an industrial microcontroller series. Exact RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status for the exact ordering designation require confirmation from the manufacturer or its current material-compliance documentation.