Infineon

XMC1100T016X0016AAXUMA1 - 32MHz Cortex-M0 16KB Flash MCU | Infineon

Référence : XMC1100T016X0016AAXUMA1 ✓ Actif
PG-TSSOP-16-8, 16-pin Package 32 MHz Speed 16 KB (16K x 8) Memory
MOQ : 1 |

XMC1100T016X0016AAXUMA1 Présentation

The Infineon Technologies XMC1100T016X0016AAXUMA1 is a 32-bit ARM Cortex-M0 microcontroller operating at up to 32 MHz, with 16 KB of Flash program memory, in a 16-pin PG-TSSOP package. It is designed for compact embedded control applications requiring deterministic real-time performance, low power operation, and integrated serial communication. The device belongs to the XMC1000 industrial microcontroller family and combines a 32-bit core with embedded Flash and RAM in a small surface-mount footprint.

An ARM Cortex-M0 microcontroller is a compact reduced-instruction-set processor architecture used for embedded control systems. In the hierarchy of electronic components, it is a microcontroller, then an integrated circuit, then a semiconductor. XMC devices are commonly used for industrial sensing, actuator control, communication modules, and low-cost control boards where a small device footprint and broad peripheral integration reduce board complexity.

Key features of the XMC1100T016X0016AAXUMA1 include a 32 MHz operating frequency, 16 KB Flash memory, 16 KB of RAM, and connectivity options identified for the XMC1100 family including I2C, LIN, SPI, and UART/USART. The 16-pin PG-TSSOP-16-8 package is suitable for space-constrained designs. The integrated serial interfaces allow the MCU to communicate with sensors, transceivers, displays, and other embedded controllers without requiring multiple external interface components.

The XMC1100 architecture is based on the ARM Cortex-M0 core, which provides a simple, deterministic execution model suitable for interrupt-driven and event-based control. The manufacturer’s XMC1100 datasheet covers electrical characteristics, physical characteristics, ordering designations, peripherals, and the complete device family. The A-step designation and the AA ordering code are part of the exact device ordering information, while the X0016 code identifies the 16 KB Flash configuration used in this part.

Typical applications include industrial sensor nodes, motor and actuator control, LIN-connected automotive and industrial subsystems, communication transceivers, building automation, and compact embedded control platforms. The microcontroller can serve as the central controller in a sensor hub, translating measurements from analog or digital sensors and forwarding data through UART, SPI, or I2C. Its small package also makes it suitable for boards where connector density and copper area are limited.

When designing a PCB around this MCU, place decoupling capacitors close to the supply pins and route sensitive communications away from high-current switching nodes. Confirm the exact pin multiplexing, power pin arrangement, clock options, and peripheral availability against the manufacturer pin-description table and reference documentation for the selected ordering designation. Programming and debug support should be verified with the appropriate XMC1100-16 device support configuration before firmware deployment.

This product page combines the manufacturer’s XMC1100 datasheet information, exact ordering details, package characteristics, application guidance, and drop-in replacement analysis to support rapid component selection and PCB design. It is intended for engineers comparing memory capacity, core performance, interface availability, package compatibility, and lifecycle requirements.

Alternatives de remplacement direct pour XMC1100T016X0016AAXUMA1 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec XMC1100T016X0016AAXUMA1 (même facteur de forme et même empreinte) — différant par Product Type, Series.

Infineon
Product Type: 32-bit ARM Cortex-M0 microcontroller
Series: XMC1000
Comparer avec XMC1100T016X0016AAXUMA1 →

XMC1100T016X0016ABXUMA1

✅ Remplacement direct
📦 PG-TSSOP-16-8
AB-step revision replaces the target AA step; 32 MHz core, 16 KB Flash, 16 KB RAM, and TSSOP-16 footprint remain aligned

📋 Alternative de référence (hors catalogue)

XMC1100-T016F0016-AB

✅ Remplacement direct
📦 PG-TSSOP-16-8
AB-step industrial ordering code replaces the target AA designation; 32 MHz core, 16 KB Flash, and TSSOP-16 package remain aligned

📋 Alternative de référence (hors catalogue)

XMC1100-T016

✅ Remplacement direct
📦 PG-TSSOP-16-8
Base family ordering designation omits the target AA and X0016 suffix fields; core frequency and 16-pin family architecture remain aligned

📋 Alternative de référence (hors catalogue)

XMC1100T016F0064AAXUMA1

✅ Remplacement direct
📦 PG-TSSOP-16-8
F0064 replaces the X0016 Flash-code field, giving a 6 KB configuration versus 16 KB Flash, a 10 KB or 62.5% memory reduction

📋 Alternative de référence (hors catalogue)

XMC1100T016X0016AAXUMA1 Valeurs maximales et caractéristiques électriques

Product Type ARM Cortex-M0 32-bit microcontroller
Core Architecture ARM Cortex-M0
Maximum CPU Frequency 32 MHz
Flash Memory 16 KB (16K x 8)
RAM 16 KB
Boîtier PG-TSSOP-16-8, 16-pin
Series XMC1000 industrial microcontroller series
Core Type Single-core
Serial Interfaces I2C, LINbus, SPI, UART/USART
Ordering Designation XMC1100T016X0016AAXUMA1
Step Designation AB step
Program Memory 16 KB embedded Flash
Data Memory 16 KB RAM
Processor Architecture 32-bit reduced-instruction-set architecture
Type de montage Surface mount
Package Pin Count 16 pins

Guide de configuration des broches du XMC1100T016X0016AAXUMA1 16 pins

Configuration des broches du XMC1100T016X0016AAXUMA1 (boîtier 16 pins). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.

Schéma de brochage du boîtier 16 pins pour le XMC1100T016X0016AAXUMA1

Aucune donnée de brochage détaillée disponible pour XMC1100T016X0016AAXUMA1.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

XMC1100T016X0016AAXUMA1 convient pour 6 applications: Industrial Sensor Nodes, LIN-Connected Actuator Control, Communication Module Control, Building Automation Endpoints, Motor and Relay Control, Compact Educational and Evaluation Boards.

🏭

Industrial Sensor Nodes

The XMC1100T016X0016AAXUMA1 fits compact industrial sensor nodes that combine acquisition, local control, and serial reporting. Its ARM Cortex-M0 core runs at up to 32 MHz, while 16 KB of Flash and 16 KB of RAM provide space for a small embedded application. I2C and SPI can serve digital sensors, and UART/USART can connect the node to a gateway. The 16-pin PG-TSSOP-16-8 footprint supports board-space reduction, although developers should confirm peripheral pin multiplexing and power requirements against the manufacturer pin table before laying out the PCB.

🚗

LIN-Connected Actuator Control

The XMC1100T016X0016AAXUMA1 is appropriate for small LIN-connected actuator controllers because the XMC1000 configuration includes LINbus alongside I2C, SPI, and UART/USART. A 32 MHz Cortex-M0 core can execute control logic and communicate with remote actuators while 16 KB RAM supports short task stacks, buffers, and communication data. The TSSOP-16 package helps minimize board area in distributed modules. Exact LIN functionality, interrupt behavior, and port configuration should be checked for the selected device derivative in the XMC1100 reference documentation.

🌐

Communication Module Control

The XMC1100T016X0016AAXUMA1 can serve as the supervisory controller in a small communications module where an external radio or network device handles high-bandwidth traffic. The MCU uses UART/USART, SPI, or I2C for configuration, status, and control traffic, while the 32 MHz core handles framing and local state-machine updates. Its 16 KB Flash and 16 KB RAM suit compact firmware rather than heavy graphics or protocol stacks. Designers should allocate pins and test levels carefully because the available communications interfaces are multiplexed through the 16-pin package.

🧩

Building Automation Endpoints

The XMC1100T016X0016AAXUMA1 suits low-cost building-automation endpoints that monitor inputs, operate simple relays or indicators, and report state over a serial network. Its 32-bit Cortex-M0 processing supports event-driven control, while the available I2C and UART/USART interfaces connect sensors and communications hardware without requiring a large external component count. The compact PG-TSSOP-16-8 package is useful in multi-zone panels. Verify supply-voltage tolerance, operating temperature, watchdog and peripheral availability, and all regulatory requirements for the completed building-control product.

⚡

Motor and Relay Control

The XMC1100T016X0016AAXUMA1 can implement deterministic relay, solenoid, or small-motor sequencing where the controller must combine multiple digital inputs and outputs. Its 32 MHz Cortex-M0 core provides useful timing margin, and 16 KB RAM accommodates modest control state and communication buffers. PWM-capable ports and serial diagnostics should be confirmed in the manufacturer documentation before assigning a motor function. Because inductive and switching loads introduce transients, the completed design needs appropriate drivers, protection, grounding, and separation between motor paths and communication signals.

🔧

Compact Educational and Evaluation Boards

The XMC1100T016X0016AAXUMA1 is useful for compact educational boards and embedded-control prototypes because it combines a widely supported ARM Cortex-M0 core, 16 KB Flash, and multiple serial interfaces in a small package. Students and engineers can use the 32 MHz processing capability for real-time exercises, and the XMC1100-16 device-support resources provide a defined target for compatible programming tools. Before creating a PCB, confirm debug signals, boot behavior, clock configuration, and exposed test points because a simplified educational board may not implement every feature of the production package.

Récapitulatif des produits recommandés

XMC1100T016X0016ABXUMA1 Same-family AB-step controller for revision review Utilisé dans : Industrial Sensor Nodes, LIN-Connected Actuator Control, Communication Module Control, Building Automation Endpoints, Motor and Relay Control, Compact Educational and Evaluation Boards XMC1100-T016F0016-AB Same-family 16 KB Flash industrial controller Utilisé dans : Industrial Sensor Nodes, LIN-Connected Actuator Control, Communication Module Control, Building Automation Endpoints, Motor and Relay Control, Compact Educational and Evaluation Boards
What is the operating frequency of XMC1100T016X0016AAXUMA1?
The Infineon XMC1100T016X0016AAXUMA1 operates at up to 32 MHz using an ARM Cortex-M0 core. According to the manufacturer’s XMC1100 data sheet, the device is a 32-bit industrial microcontroller with a 32 MHz CPU, 16 KB Flash, and 16 KB RAM. The PG-TSSOP-16-8 package makes this frequency and memory combination suitable for compact embedded control systems requiring deterministic execution and multiple serial peripherals.
How much Flash and RAM does XMC1100T016X0016AAXUMA1 have?
The XMC1100T016X0016AAXUMA1 provides 16 KB of Flash program memory and 16 KB of RAM. The DigiKey product listing identifies the Flash as 16K x 8 and the device as a 32-bit, 32 MHz XMC1000 microcontroller. The X0016 ordering segment corresponds to the 16 KB Flash configuration, while the manufacturer data sheet documents the complete ordering designations for the XMC1100 family.
Where can I download the XMC1100T016X0016AAXUMA1 datasheet PDF?
The official XMC1100 datasheet is available from Infineon at https://www.infineon.com/assets/row/public/documents/30/49/infineon-xmc1100-ab-datasheet-en.pdf. It documents the XMC1100 series electrical and physical characteristics, ordering designations, peripherals, and pin-related information. Use the pin-description table in that manufacturer document when assigning PCB signals to this exact PG-TSSOP-16-8 device.
What is the pinout of XMC1100T016X0016AAXUMA1?
The XMC1100T016X0016AAXUMA1 uses a 16-pin PG-TSSOP-16-8 package, and its complete pin names and alternate functions must be assigned from the manufacturer pin-description table. The Infineon XMC1100 data sheet is the authoritative source for port mapping, supply pins, clock signals, communications pins, and debug functions. Do not infer pin assignments from a generic 16-pin drawing because multiplexed peripheral functions can differ by device derivative.
Which serial interfaces are available on XMC1100T016X0016AAXUMA1?
The XMC1100T016X0016AAXUMA1 supports I2C, LINbus, SPI, and UART/USART connectivity in the XMC1000 family configuration identified for this part. These interfaces make it suitable for sensor aggregation, industrial serial links, actuator control, and communication modules. The exact pin multiplexing, operating modes, and peripheral availability for this ordering designation should be confirmed in the manufacturer pin-description table and reference documentation.
What can replace XMC1100T016X0016AAXUMA1?
The closest documented replacements are XMC1100T016X0016ABXUMA1 and XMC1100-T016F0016-AB, both 16 KB Flash, 32 MHz, TSSOP-16 XMC1100-family devices. They are suitable candidates for same-footprint review, but firmware, step revision, temperature grade, qualification markings, and ordering-code requirements must be checked before substitution. No verified cross-brand pin-to-pin equivalent was identified for this specific ordering designation.
Is XMC1100T016X0016AAXUMA1 the same as XMC1100T016X0016ABXUMA1?
No. XMC1100T016X0016ABXUMA1 is identified as the AB-step version, while the target is ordered with the AA suffix. Both retain the XMC1100 family architecture, 32 MHz Cortex-M0 core, 16 KB Flash, 16 KB RAM, and PG-TSSOP-16-8 package according to the manufacturer ordering documentation. Treat the step designation as a revision distinction and validate the complete ordering code before using either device in a released design.
When should I choose XMC1100T016X0016AAXUMA1 over XMC1100-T016F0016-AB?
Choose XMC1100T016X0016AAXUMA1 when the released BOM specifically requires the AA ordering designation and its associated qualification or marking configuration. Choose XMC1100-T016F0016-AB only after confirming the AB step, industrial temperature range, package, firmware compatibility, and all certification requirements. Both provide a 32 MHz ARM Cortex-M0 core and 16 KB Flash in the XMC1100 industrial family.
Is XMC1100T016X0016AAXUMA1 suitable for industrial sensor control?
The XMC1100T016X0016AAXUMA1 is suitable for compact industrial sensor-control designs that need a 32 MHz Cortex-M0 core, 16 KB Flash, 16 KB RAM, and serial connectivity. Its I2C, SPI, UART/USART, and LIN options support common sensor and actuator interfaces. Validate the exact supply limits, operating temperature range, ESD requirements, and peripheral assignments against the manufacturer data sheet for the production environment.
What is the best Microchip equivalent for XMC1100T016X0016AAXUMA1?
No verified Microchip pin-to-pin equivalent was found for XMC1100T016X0016AAXUMA1. A functional replacement may use an ARM Cortex-M0 controller with comparable Flash and RAM, but a true drop-in replacement must preserve the 16-pin TSSOP footprint, pin functions, power behavior, programming model, and communication peripherals. Use the Request a Quote form on this page for assistance identifying an acceptable second source.
Does XMC1100T016X0016AAXUMA1 support debugging and programming tools?
The XMC1100-16 device is supported by PEmicro device-support resources, which list the XMC1100-16 as an Infineon Arm Cortex-M0 device and identify it in the device selector. The manufacturer documentation also covers the family’s embedded programming and debug behavior. Confirm the debugger, programmer, target configuration, and exact device identifier for your production firmware before committing the PCB layout.
Where can I buy XMC1100T016X0016AAXUMA1 and what is its lead time?
Use the Request a Quote form on this page to ask about XMC1100T016X0016AAXUMA1 availability, lead time, minimum order quantity, and packaging. The device is offered as a 16-pin PG-TSSOP-16-8 industrial Cortex-M0 microcontroller with 16 KB Flash and 16 KB RAM. Current stock and production allocation should be confirmed through the quote process rather than inferred from general catalog listings.
What is the price of XMC1100T016X0016AAXUMA1?
The current commercial terms for XMC1100T016X0016AAXUMA1 are obtained through the Request a Quote form on this page. The form allows buyers to specify quantity, packaging, and delivery requirements while receiving an updated quotation. Because pricing and inventory can vary with volume and market conditions, use the form for current unit, scheduled, and volume-break information.
Is XMC1100T016X0016AAXUMA1 in stock?
Current stock for XMC1100T016X0016AAXUMA1 should be confirmed through the Request a Quote form on this page. Submit the required quantity, target package, and delivery region to obtain an availability response for the exact AA ordering designation. This avoids confusion with other XMC1100 variants that have similar flash configurations but different step, qualification, or packaging codes.
What are the key specifications of XMC1100T016X0016AAXUMA1 that engineers should know?
The key specifications are a 32-bit ARM Cortex-M0 core, 32 MHz maximum CPU frequency, 16 KB Flash, 16 KB RAM, and a 16-pin PG-TSSOP-16-8 package. The device also provides I2C, LINbus, SPI, and UART/USART connectivity for embedded control. Its combination of memory capacity, serial interfaces, and compact surface-mount packaging suits industrial sensing, actuator control, and communication-module designs.

Données de référence d'ingénierie pour XMC1100T016X0016AAXUMA1 — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose XMC1100T016X0016AAXUMA1 when the design specifically requires the AA ordering designation, a 32 MHz ARM Cortex-M0 core, 16 KB Flash, 16 KB RAM, and a 16-pin PG-TSSOP-16-8 footprint. It is appropriate for compact industrial sensing, serial connectivity, actuator control, and distributed automation nodes. Select XMC1100T016X0016ABXUMA1 or XMC1100-T016F0016-AB only after checking the AB-step differences, qualification markings, and released BOM requirements. Use XMC1100-T016 as a family reference rather than assuming every base ordering code has the target memory and qualification configuration. XMC1100T016F0064AAXUMA1 is the closest memory-reduced candidate, but its 6 KB Flash is 10 KB lower, so it suits only firmware that fits the smaller code space. No verified cross-brand drop-in equivalent was established, so an alternate manufacturer would require a new footprint and firmware compatibility review rather than a simple component swap.

Comparaison avec les alternatives

Paramètre Ce produit XMC1100T016X0016ABXUMA1 XMC1100-T016F0016-AB XMC1100-T016 XMC1100T016F0064AAXUMA1
Package PG-TSSOP-16-8 PG-TSSOP-16-8 TSSOP-16 PG-TSSOP-16-8 family package PG-TSSOP-16-8
Brand Infineon Technologies Infineon Technologies Infineon Technologies Infineon Technologies Infineon Technologies
Core ARM Cortex-M0 ARM Cortex-M0 ARM Cortex-M0 ARM Cortex-M0 ARM Cortex-M0
Maximum CPU Frequency 32 MHz 32 MHz 32 MHz 32 MHz 32 MHz
Ordering Step AA AB AB Base family designation AA
Serial Connectivity I2C, LINbus, SPI, UART/USART XMC1100 family I2C, LINbus, SPI, UART/USART XMC1100 family I2C, LINbus, SPI, UART/USART XMC1100 family serial peripherals XMC1100 family serial peripherals
Product Type Industrial ARM Cortex-M0 microcontroller Industrial ARM Cortex-M0 microcontroller Industrial ARM Cortex-M0 microcontroller Microcontroller ARM Cortex-M0 microcontroller

Principaux différenciateurs

  • Provides the exact 16 KB Flash configuration in a compact 16-pin package (vs XMC1100T016F0064AAXUMA1)
  • Targets the AA ordering configuration with 32 MHz ARM Cortex-M0 performance (vs XMC1100T016X0016ABXUMA1)
  • Combines four named serial peripheral classes in a small MCU footprint (vs XMC1100-T016F0016-AB)

Notes de conception

Route power and decoupling directly to the MCU rather than distributing them through long shared traces. Place the required input and bulk capacitors close to their corresponding supply pins, with a compact ground return beneath or beside the device. Keep the 16-pin TSSOP footprint free of accidental copper obstructions and verify the exposed assembly drawing, pin-one orientation, solder profile, and land pattern against the manufacturer package drawing.

Use the manufacturer pin-description table to construct the signal matrix before routing. I2C, SPI, UART/USART, LINbus, and port functions can share multiplexed pins, so reserving alternate functions may require firmware changes or a board respin. Confirm boot and debug assignments, clock pins, reset behavior, and ground references in the reference documentation, then label both PCB and firmware pin definitions with the same port and signal names.

Do not treat every XMC1100 ordering code as an interchangeable production part. The target uses an AA suffix, while documented alternatives use AB or base family designations; the F0064 alternative also reduces Flash from 16 KB to 6 KB. Validate step revision, memory size, temperature grade, qualification marking, pin multiplexing, and firmware image assumptions before releasing a substitution. A matching package alone does not establish complete product equivalence.

For serial links and external sensors, keep clock and data traces short, provide a continuous ground reference, and avoid routing communication signals parallel to switching-node edges or high-current relay traces. Add series damping only after signal-integrity measurements determine that it is required. For LIN or other physically longer interfaces, follow the applicable transceiver, termination, protection, and grounding recommendations from the system design and the manufacturer peripheral documentation.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The XMC1100 family is identified as an industrial microcontroller series. Exact RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status for the exact ordering designation require confirmation from the manufacturer or its current material-compliance documentation.

Données vérifiées le : 2026-11-16 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

XMC1100T016X0016AAXUMA1 datasheet XMC1100T016X0016AAXUMA1 pinout XMC1100T016X0016AAXUMA1 datasheet pdf XMC1100T016X0016AAXUMA1 equivalent XMC1100T016X0016AAXUMA1 replacement XMC1100T016X0016AAXUMA1 price XMC1100T016X0016AAXUMA1 stock Infineon XMC1100T016X0016AAXUMA1 XMC1100 32MHz 16KB TSSOP-16 XMC1100 TSSOP-16 pinout XMC1100 Cortex-M0 sensor controller XMC1100T016X0016AAXUMA1 vs XMC1100T016X0016ABXUMA1

Composants & termes associés

Infineon Technologies XMC1100T016X0016AAXUMA1 XMC1100T016X0016ABXUMA1 XMC1100-T016F0016-AB XMC1100T016F0064AAXUMA1 XMC1100 XMC1000 ARM Cortex-M0 ARM Cortex-M0 microcontroller 32-bit microcontroller embedded microcontroller integrated circuit semiconductor PG-TSSOP-16-8 TSSOP-16 surface mount SMD package 16 KB Flash 16 KB RAM 32 MHz I2C LINbus SPI UART/USART
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ