XMC4400F64F512ABXQMA1 - 120MHz Cortex-M4 MCU | Infineon
MPN: XMC4400F64F512ABXQMA1 ✓ AktifXMC4400F64F512ABXQMA1 Ringkasan
A microcontroller is a programmable semiconductor device that integrates a processor core, memory, peripherals, and communication interfaces into one component. Within the product hierarchy, the XMC4400F64F512ABXQMA1 is an Arm Cortex-M4 microcontroller, part of the XMC4000 family, and an industrial embedded-control IC. This combination makes it appropriate for compact control systems that require deterministic real-time execution alongside an Ethernet-capable communications architecture.
The principal device characteristics include a 120 MHz CPU frequency, 512 KB of flash organized as 512K × 8, 32-bit processing, and a 64-pin PG-LQFP package. The industrial ordering designation XMC4400-F64F512-BA identifies the XMC4400, 120 MHz core, 512 KB flash configuration, and industrial grade. The Arm Cortex-M4 core includes a built-in DSP instruction set, supporting efficient fixed-point signal-processing operations without requiring a separate DSP in suitable control systems.
Ethernet MAC capability differentiates this device from basic general-purpose microcontrollers and makes it relevant to industrial networking, connected automation, and embedded communications equipment. The exact peripheral mix, RAM configuration, electrical limits, and pin functions must be confirmed in the XMC4400 manufacturer datasheet before schematic capture or firmware deployment. The XMC4000 family documentation also covers derivative-specific ordering information, electrical characteristics, package details, and errata.
Typical applications include industrial Ethernet controllers, motor-control platforms, factory automation nodes, CAN-connected equipment, embedded gateways, and real-time sensor-processing systems. In these designs, the 120 MHz Cortex-M4 core executes control logic while the DSP instruction set accelerates suitable filtering, signal transformation, and modulation workloads. The 512 KB flash capacity provides room for an embedded application, protocol stacks, configuration data, and boot code within a single device.
PCB design should account for the 64-pin LQFP footprint, exposed thermal and routing requirements, power-supply decoupling, Ethernet signal integrity, and programming access. Firmware projects should verify startup behavior, interrupt-vector configuration, peripheral availability, and pin multiplexing against the exact ordering code. A hardware redesign should not be attempted unless the alternative device has the same package, pinout, power architecture, peripheral mapping, and software-support requirements.
This product summary combines the manufacturer ordering information, distributor identification, datasheet references, and engineering guidance for XMC4400F64F512ABXQMA1. It also highlights practical selection, comparison, application, and sourcing questions that help engineers determine whether the 120 MHz Cortex-M4 architecture and 512 KB flash configuration match the intended industrial embedded design.
Alternatif penggantian untuk XMC4400F64F512ABXQMA1 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian XMC4400F64F512ABXQMA1 (sama faktor bentuk dan footprint) — berbeda di dalam Package, Product Type.
XMC4400F64F512BAXQMA1
✅ Drop-InKontak untuk harga
Lihat Datasheet →XMC4400F64F512ABXQMA1 Rating Maksimal & Karakteristik Listrik
| Manufacturer | Infineon Technologies |
| Product Type | Industrial microcontroller IC |
| Processor Core | Arm Cortex-M4 |
| CPU Architecture | 32-bit ARM |
| Maximum CPU Frequency | 120 MHz |
| DSP Support | Built-in DSP instruction set |
| Flash Memory | 512 KB (512K x 8) |
| Ethernet Support | Ethernet MAC |
| Tegangan Pemuat | 3.3 V |
| Paket | PG-LQFP-64 |
| Jumlah Pin | 64 pins |
| Gaya Mounting | Surface mount |
| Series | XMC4000 |
| Application Classification | Industrial |
| Ordering Designation | XMC4400-F64F512-BA |
| Status RoHS | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
XMC4400F64F512ABXQMA1 pg-lqfp-64 Diamant Konfigurasi Panduan
Konfigurasi pin untuk XMC4400F64F512ABXQMA1 (pg-lqfp-64 pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.
Tidak ada data diatribut pin yang tersedia untuk XMC4400F64F512ABXQMA1.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
XMC4400F64F512ABXQMA1 cocok untuk 6 aplikasis: Industrial Ethernet Control Node, Factory Automation Controller, Real-Time Motor Control, Embedded Sensor Signal Processing, Connected Sensor Gateway, Programmable Logic Controller.
Industrial Ethernet Control Node
The XMC4400F64F512ABXQMA1 fits industrial Ethernet control nodes that need more computation and program storage than a basic 8-bit or low-memory microcontroller. Its 120 MHz Arm Cortex-M4 core supports responsive protocol handling and real-time control tasks, while 512 KB of flash accommodates networking code, configuration data, diagnostics, and application logic. The Ethernet MAC provides a foundation for an industrial communication design without requiring a separate host processor. The practical trade-off is that the Ethernet physical layer still needs appropriate PHY, magnetics, isolation, connector, and controlled-impedance implementation. Firmware and hardware validation should confirm the exact pin multiplexing and clocking arrangement from the Infineon XMC4400 manufacturer datasheet.
Direkomendasikan
Factory Automation Controller
The XMC4400F64F512ABXQMA1 is appropriate for factory automation modules combining deterministic control, communications, and local diagnostics. A 120 MHz Cortex-M4 core provides useful performance for coordinating sensors, actuators, interlocks, and communication tasks, while the built-in DSP instruction set can accelerate selected fixed-point signal-processing operations. Its 512 KB flash capacity supports an embedded runtime, protocol handlers, calibration parameters, and logging code. The 64-pin PG-LQFP package offers a practical interface density for industrial boards, but designers must provide robust decoupling, reset supervision, clock circuitry, and protection against industrial transients. Production qualification should include environmental testing, brownout behavior, and communication interoperability checks.
Direkomendasikan
Real-Time Motor Control
The XMC4400F64F512ABXQMA1 can serve as the control processor in a real-time motor-control system because its 120 MHz Cortex-M4 core combines general-purpose control with built-in DSP instructions. Those instructions are useful for filters, transformations, and other fixed-point operations performed by motor-control algorithms. The 512 KB flash capacity allows substantial application code, parameter tables, and diagnostic routines to reside locally. Integration still requires carefully selecting gate drivers, sensing interfaces, protection circuits, and timing resources; a microcontroller alone does not determine motor-system safety or performance. Firmware developers should validate interrupt latency, PWM synchronization, current-sense scaling, and fault handling on the final board, while analog and power engineers should observe the exact electrical limits in the Infineon manufacturer datasheet.
Direkomendasikan
Embedded Sensor Signal Processing
The XMC4400F64F512ABXQMA1 is suitable for sensor-processing nodes that combine acquisition, filtering, control, and network reporting in one industrial microcontroller. Its 120 MHz Arm Cortex-M4 core and built-in DSP instruction set support real-time fixed-point calculations, while 512 KB of flash provides room for sampling routines, calibration data, protocol stacks, and production configuration. The device can centralize an embedded design around an Ethernet-capable architecture, reducing the need for a separate communications processor. Signal-chain integrity remains a board-level concern: sensor excitation, analog filtering, grounding, reference voltage, and isolation must be designed around the MCU's ADC and analog characteristics. Verify the precise converter resolution, sampling behavior, input range, and peripheral availability in the XMC4400 manufacturer datasheet before fixing the analog architecture.
Direkomendasikan
Connected Sensor Gateway
The XMC4400F64F512ABXQMA1 can form the core of a connected industrial sensor gateway by combining protocol processing, local data handling, and Ethernet MAC capability in a 120 MHz Cortex-M4 device. Its 512 KB flash supports gateway firmware, network stacks, device descriptions, and update logic, while the DSP instruction set benefits selected signal transformations. This integration can simplify board partitioning when a separate network processor would otherwise be required. The trade-off is increased design responsibility for Ethernet signal integrity, timing, boot sequencing, and secure update behavior. Use a PHY and magnetic-network interface suited to the required isolation and distance, keep Ethernet routes away from sensitive analog paths, and verify startup and watchdog behavior in the final firmware. The manufacturer datasheet remains the authority for electrical and pin-level implementation.
Direkomendasikan
Programmable Logic Controller
The XMC4400F64F512ABXQMA1 is suitable for a compact programmable logic controller that coordinates digital inputs, outputs, communications, and deterministic application tasks. The 120 MHz Cortex-M4 core provides ample general-purpose processing, and the 512 KB flash supports a PLC runtime, configuration storage, diagnostics, and field-communication code. The built-in Ethernet MAC enables network-capable PLC variants, while the same device can support other industrial bus interfaces through suitable external controllers. A practical design should use level-shifting or isolation for field wiring, robust protection for inductive loads, and deterministic scheduling for safety-related tasks. Verify GPIO drive limits, analog functions, timer resources, and package-specific connections directly in the Infineon XMC4400 manufacturer datasheet, then validate timing margins under worst-case operating conditions.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk XMC4400F64F512ABXQMA1 — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | XMC4400F64F512BAXQMA1 |
|---|---|---|
| Package | PG-LQFP-64 | PG-LQFP-64 |
| Brand | Infineon Technologies | Infineon Technologies |
| Processor Core | Arm Cortex-M4 | Arm Cortex-M4 |
| Maximum CPU Frequency | 120 MHz | 120 MHz |
| Flash Memory | 512 KB (512K x 8) | 512 KB |
| CPU Architecture | 32-bit ARM | 32-bit ARM |
| Ethernet Support | Ethernet MAC | Ethernet MAC |
| Number of Pins | 64 pins | 64 pins |
| Mounting Style | Surface mount | Surface mount |
| Application Classification | Industrial | Industrial |
Diferensiator Kunci
- Matched 120 MHz Cortex-M4 and 512 KB flash configuration (vsXMC4400F64F512BAXQMA1)
- Identical documented package and pin count (vsXMC4400F64F512BAXQMA1)
- Industrial Ethernet-oriented integration (vsXMC4400F64F512BAXQMA1)
Catatan Desain
Use the Infineon XMC4400 PG-LQFP-64 land pattern and pin-description table as the controlling references for PCB construction. Place all required decoupling capacitors close to their associated power pins, provide a clean ground reference at every return path, and avoid routing Ethernet or other fast signals beneath the device where coupling to sensitive analog nets could occur. Verify the exposed-pad and thermal-land requirements for the exact PG-LQFP-64 variant before releasing the footprint.
Estimated: the listed 3.3 V nominal supply does not determine the regulator design by itself. Calculate the MCU rail budget from the exact current and voltage-limit tables in the Infineon manufacturer datasheet, then size the local supply for startup, Ethernet-transceiver activity, and peripheral loads. Keep the regulator output impedance low at switching frequencies and provide bulk energy near the device to support transient demands without allowing the rail to cross its specified operating limits.
Treat clock, debug, programming, and Ethernet routes as separate high-value nets. Use short return paths, continuous ground references, and controlled geometry for Ethernet differential pairs. Place the crystal or external clock source according to the manufacturer reference layout, and keep programming and debug connectors accessible without introducing long sensitive traces. Review the complete pin multiplexing in the datasheet before assigning any peripheral because several functions can share alternate pins.
Do not treat an ordering-code substitution as automatically equivalent. XMC4400F64F512ABXQMA1 and XMC4400F64F512BAXQMA1 share the documented package identity, but a released design should still confirm temperature grade, electrical limits, lifecycle status, peripheral availability, and errata. Also avoid enabling unused GPIO pins in a way that creates contention. Review reset state, pin direction defaults, and bootloader interactions in the device documentation.
Informasi Konformitas
The available manufacturer and distributor information identifies an industrial microcontroller but does not state the requested compliance attributes.
