Zilog

Z8609316PSC - 8-Bit 16MHz ROMless MCU | Zilog | DIP-40

MPN: Z8609316PSC ✓ Aktif
PDIP-40 Package 16 MHz Speed ROMless Memory
MOQ: 1 |

Z8609316PSC Ringkasan

Zilog, Inc. Z8609316PSC is an 8-bit Z8 ROMless microcontroller operating at 16 MHz and housed in a 40-pin PDIP package. It is intended for embedded control designs in which the application program is stored in external memory rather than in on-chip ROM. The device combines a small 8-bit processor with a classic through-hole DIP footprint, supporting both prototype assembly and conventional through-hole PCB construction.

A microcontroller is a compact embedded-processing component that integrates a CPU, memory interface, and peripheral functions into one device. The Z8609316PSC belongs to the Z8 family, where ROMless means the MCU does not contain the application program internally. External program memory is therefore required, and the complete memory interface and associated bus behavior must be considered when designing the PCB or upgrading an existing system.

The principal identified characteristics are an 8-bit architecture, a 16 MHz clock, ROMless program-memory organization, and a 40-pin PDIP package. The 40-pin arrangement provides a comparatively generous connection count for an 8-bit control device, while the through-hole format simplifies prototyping, socketed assemblies, and manual service. Because the MCU depends on external program memory, the complete design must also account for that memory device and its address, data, and control signals.

The Z8609316PSC is identified as a ROMless CMOS microcontroller within the Z8 product family. Its architecture is intended for small control systems where deterministic embedded-code execution, peripheral integration, and direct external-memory access are more important than a large integrated Flash footprint. The 16 MHz operating rate gives the processor more instruction throughput than lower-frequency 8-bit controllers while retaining the simple programming model and external-bus architecture characteristic of the family.

Typical uses include industrial controllers, instrumentation panels, motor and relay sequencing, legacy peripheral emulation, and embedded products that retain external EPROM or other external program memory. It can also serve as an architecture-compatible option when maintaining older Z8 hardware requires a processor upgrade without changing a through-hole board layout. Firmware, external-memory timing, input/output levels, and peripheral availability must be confirmed against the manufacturer documentation before production release.

The most important design consideration is continuity of the external memory interface. Route address, data, and control lines according to the device's electrical and timing requirements, keep the clock distribution clean, and terminate unused inputs only as directed by the manufacturer's guidance. Because the target is a legacy through-hole MCU, pay particular attention to socket selection, pin-1 orientation, supply decoupling, and the mechanical fit of the 40-pin package.

This page consolidates the identified device characteristics, sourcing information, package details, comparison fields, and engineering cautions into one practical reference. It also distinguishes confirmed identity and architecture facts from parameters that must be established from the manufacturer documentation before schematic release, firmware development, or component substitution.

Alternatif penggantian untuk Z8609316PSC — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Z8609316PSG

✅ Drop-In
📦 PDIP-40
Same 8-bit architecture and 16 MHz rating, with 0% difference in the confirmed clock and word-length ratings; package construction suffix must still be verified.

📋 Alternatif referensi (tidak dalam katalog)

Z8609316PSC Rating Maksimal & Karakteristik Listrik

Processor Architecture 8-bit
Frekuensi Bawah Maximum 16 MHz
CPU Family Z8
Program Memory Organization ROMless
On-Chip Program Memory 0 bytes (ROMless architecture)
Package Type PDIP-40
Total Pin Count 40 pins
Mounting Technology Through-hole
Package Body Width 0.620 in
Package Lead Span 15.75 mm
Status RoHS Unknown
REACH Status Unknown

Z8609316PSC 15.75 mm Diamant Konfigurasi Panduan

Konfigurasi pin untuk Z8609316PSC (15.75 mm pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.

Diamant diagram pakai pakai 15.75 mm untuk Z8609316PSC

Tidak ada data diatribut pin yang tersedia untuk Z8609316PSC.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

Z8609316PSC cocok untuk 6 aplikasis: Legacy Z8 Industrial Control Upgrade, Instrumentation and Measurement Panel, Motor and Relay Sequencing Controller, External-Memory Control Platform, Prototype Embedded Controller, Peripheral Emulation and Test Controller.

🏭

Legacy Z8 Industrial Control Upgrade

The Z8609316PSC fits maintenance programs for legacy Z8 industrial controllers that require an 8-bit processor, 16 MHz clock, and a 40-pin through-hole footprint. Its ROMless organization lets an updated controller retain external program memory when redesigning the processing section is undesirable. The DIP-40 package also simplifies socket-based service replacement. Before committing, verify the original controller's supply voltage, external-memory bus, port assignments, and temperature requirements against the manufacturer documentation.

🔧

Instrumentation and Measurement Panel

The Z8609316PSC can support a small measurement controller built around discrete sensors, switches, and displays. Its 8-bit architecture is suitable for basic acquisition, threshold evaluation, calibration tables, and front-panel sequencing, while 16 MHz operation provides useful throughput for interrupt-driven I/O. The 40-pin PDIP format is convenient for a hand-built prototype. Firmware and external-memory timing should be validated because only the processor architecture, clock, ROMless organization, and package are confirmed here.

⚡

Motor and Relay Sequencing Controller

The Z8609316PSC is applicable to simple sequencing controllers that operate relays, solenoids, indicators, and stepper-related interfaces. An 8-bit Z8 processor can implement deterministic state machines, timing tables, interlocks, and fault handling, while the 16 MHz clock provides headroom for interrupt servicing. Its 40-pin DIP package makes socketed replacement practical in mature equipment. Output-driver ratings, isolation, flyback paths, and supply requirements must be designed separately and checked against the controller's electrical limits.

🖥️

External-Memory Control Platform

The Z8609316PSC naturally fits a platform whose program is held in external memory rather than internal ROM. This can be useful when retaining a proven bus arrangement or supporting a memory-remapping strategy across several controller revisions. The MCU provides the 8-bit processing and 16 MHz operating point needed for compact control logic. Board designers must define the external address and data connections, decode any additional peripherals, and verify all timing from the manufacturer documentation before releasing the layout.

💡

Prototype Embedded Controller

The Z8609316PSC is well suited to breadboard, wire-wrap, and socket-based prototype development because it uses a 40-pin through-hole PDIP package. Engineers can evaluate 8-bit control code at 16 MHz without introducing a fine-pitch footprint, while the ROMless organization permits flexible external-memory experiments. For a new design, verify supply voltage, clock source, reset behavior, port direction, and every unused input. The package is convenient for prototypes, but production planning should also consider long-term availability and obsolescence risk.

🧩

Peripheral Emulation and Test Controller

The Z8609316PSC can serve as the control element in a peripheral emulation fixture or legacy interface test platform. Its 8-bit processing, 16 MHz clock, and external-program-memory architecture allow compact sequences of I/O patterns, acknowledgments, timing tests, and status checks. The through-hole package permits straightforward socket replacement when a fixture is reused across several boards. The controller must be evaluated against the emulated interface's voltage, timing, and pin requirements before use, and its undocumented peripheral assignments must not be assumed.

What is the Z8609316PSC?
The Z8609316PSC is a Zilog, Inc. 8-bit ROMless microcontroller rated at 16 MHz and packaged in a 40-pin PDIP. The controller uses external program memory rather than internal application ROM, making it suitable for legacy embedded designs that already include an external memory device. Manufacturer and distributor product descriptions identify the MCU as a Z8-family, through-hole device with a 0.620-inch package width and 15.75 mm lead span.
What is the operating frequency of the Z8609316PSC?
The Z8609316PSC operates at up to 16 MHz. This clock rate distinguishes it from slower 8-bit controllers and gives the processor greater instruction throughput for control, sequencing, and peripheral-handling tasks. The operating clock must be derived from the circuit described in the manufacturer documentation, with supply voltage, oscillator requirements, and permissible clock sources confirmed before the timing design is finalized.
Why does the Z8609316PSC require external program memory?
The Z8609316PSC is a ROMless MCU, so its application program is not stored in internal ROM. A board using this controller must therefore include an external program-memory device and route the address, data, and control bus correctly. The selected memory must satisfy the controller's bus timing and addressing requirements, which should be checked in the manufacturer datasheet before schematic and firmware release.
What package does the Z8609316PSC use?
The Z8609316PSC uses a 40-pin PDIP package intended for through-hole PCB mounting. Product listings identify a 0.620-inch body width and 15.75 mm lead span. The package differs from leaded PLCC, QFP, and fine-pitch devices, so a direct board substitution must preserve both the DIP outline and the electrical function of every pin.
Where can I find the Z8609316PSC datasheet and pinout?
The Z8609316PSC datasheet can be located through the product's Zilog documentation and the linked technical datasheet page. The search results identify a PDF datasheet associated with the device family, while the exact pin names, power pins, reset behavior, clock pins, and port assignments should be read from the manufacturer pin-description table. A complete 40-pin map is not reproduced here because it is not stated in the accessible product descriptions.
Is Z8609316PSC suitable for industrial control applications?
The Z8609316PSC can be considered for industrial control applications that use an 8-bit, 16 MHz Z8 architecture and external program memory. Its 40-pin PDIP construction supports through-hole prototype and legacy-product maintenance. Suitability must still be established from the operating-temperature range, electrical limits, peripheral inventory, and qualification status, none of which can be confirmed from the concise catalog descriptions alone.
What can replace the Z8609316PSC on an existing board?
A valid replacement for the Z8609316PSC must match its 40-pin PDIP footprint, 8-bit processing requirements, 16 MHz timing class, external-memory interface, power pins, port functions, and control-signal polarity. Z8609316PSG is the closest same-family candidate identified in the component records, but it should be treated as a qualified alternate rather than assumed universally interchangeable. Confirm its package construction and complete pin mapping before substitution.
What is the best drop-in replacement for Z8609316PSC?
No cross-manufacturer drop-in replacement can be confirmed from the available cross-reference results. The best-defined same-family candidate is Z8609316PSG, which retains the identified 8-bit, 16 MHz, ROMless, 40-pin organization, but its exact mechanical and electrical equivalence still requires comparison with the manufacturer documentation. Do not approve a replacement based only on the shared processor class and package pin count.
Is the Z8609316PSC the same as Z8609316PSG?
Both identifiers belong to the same Z8609316 product family and are associated with 8-bit, 16 MHz, ROMless 40-pin controller descriptions. They are not automatically identical because the final suffix can identify a different package construction, temperature grade, or qualification variant. Check the ordering information, package material, temperature range, and pin labels before treating Z8609316PSG as a direct replacement.
Z8609316PSC vs Z86C9325PSG — which controller should I choose?
Z8609316PSC is identified as a ROMless 8-bit Z8 MCU operating at 16 MHz in a PDIP-40 package. Z86C9325PSG is another 40-pin Z8-family member, but it has a different product identifier and may differ in memory organization, peripheral configuration, and lifecycle considerations. Use Z8609316PSC for continuity with its original external-memory design; evaluate Z86C9325PSG only after checking its datasheet and pin compatibility.
When should I choose Z8609316PSC over another 8-bit MCU?
Choose Z8609316PSC when an existing design requires a 40-pin through-hole Z8 controller with an 8-bit architecture, 16 MHz operation, and external program memory. It is particularly relevant for maintenance, replication, and industrial legacy products where changing the physical footprint would cause unnecessary PCB or firmware disruption. For new designs with integrated Flash, a smaller package, or different peripheral requirements, compare those benefits against the cost of retaining this architecture.
Is Z8609316PSC appropriate for a Z8-based industrial controller?
The Z8609316PSC is appropriate for consideration in a Z8-based industrial controller when the controller requires 16 MHz 8-bit processing and external program memory. Its PDIP-40 package is mechanically convenient for prototype and through-hole assemblies. Final suitability depends on temperature range, supply limits, I/O ratings, watchdog or communication peripheral availability, and qualification requirements, which must be confirmed from the manufacturer documentation.
Where can I buy Z8609316PSC online?
Use the Request a Quote form on this page to request Z8609316PSC availability, current commercial terms, and lead time from XAIPART. The part is an 8-bit, 16 MHz, ROMless microcontroller in a 40-pin PDIP package. A firm availability commitment should be obtained for the exact suffix because package construction, production status, and incoming-lot conditions can affect fulfillment.
What is the price of Z8609316PSC?
Request a current Z8609316PSC quotation through the Request a Quote form on this page. The structured offer is updated separately from technical documentation because commercial terms and component availability can change more frequently than the product identity. For planning purposes, confirm the exact 40-pin PDIP ordering code, quantity, delivery schedule, and any traceability requirements with the supplier.
What is the lead time for Z8609316PSC?
The current lead time for Z8609316PSC should be confirmed through the Request a Quote form on this page. Lead time depends on the exact suffix, available inventory, incoming supply, required quantity, and inspection or traceability requirements. For production planning, provide the forecast quantities and target delivery schedule so that the order can be matched to the appropriate supply route.
Is Z8609316PSC in stock?
Current Z8609316PSC stock status should be requested through the Request a Quote form on this page. Market listings indicate that the exact part has been cataloged with inventory, but live availability is not guaranteed by a static product page. Provide the required quantity, packaging preference, and date by which material must arrive so that a current allocation can be confirmed.
What are the key specifications of Z8609316PSC that engineers should know?
The key confirmed specifications for Z8609316PSC are an 8-bit Z8 architecture, 16 MHz maximum clock, ROMless program-memory organization, and a 40-pin PDIP package with through-hole mounting. The package is listed at 0.620 inch wide with a 15.75 mm lead span. Supply voltage, RAM, GPIO count, temperature range, and external-bus details remain critical items to confirm in the manufacturer documentation before final design release.

Data referensi engineering untuk Z8609316PSC — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose Z8609316PSC when maintaining or replicating a Z8 design that depends on an 8-bit, 16 MHz ROMless processor in a 40-pin through-hole package. It is especially relevant for legacy industrial, instrumentation, and peripheral-control products where changing the external-memory architecture, firmware environment, or PCB footprint would add unnecessary risk. Z8609316PSG is the only same-family alternative identified with matching core characteristics, but its suffix may denote a different package construction or qualification arrangement; verify mechanical drawings, temperature grade, and pin assignments before substitution. For new projects, compare the Z8609316PSC with Z8 devices offering integrated Flash, smaller packages, or application-specific peripherals. Choose the newer architecture when those benefits outweigh the cost of redesigning firmware, external memory, and the board. A platform migration is not recommended when equipment continuity, installed sockets, and proven external-memory timing dominate the design requirements.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini Z8609316PSG
Brand Zilog, Inc. Zilog, Inc.
Package PDIP-40 PDIP-40
Processor Architecture 8-bit 8-bit
Maximum Clock Frequency 16 MHz 16 MHz
Program Memory Organization ROMless ROMless
On-Chip Program Memory 0 bytes 0 bytes
Total Pin Count 40 pins 40 pins
Mounting Technology Through-hole Through-hole

Diferensiator Kunci

  • Confirmed 16 MHz operating rate (vsZ8609316PSG)
  • Same confirmed 8-bit processing width (vsZ8609316PSG)
  • ROMless organization retained (vsZ8609316PSG)
  • Compatible 40-pin through-hole format (vsZ8609316PSG)

Catatan Desain

Design the PCB around a true 40-pin through-hole footprint with the correct row spacing and pin-1 orientation. The catalog identifies a 15.75 mm lead span and 0.620-inch body width. Before routing, compare the proposed footprint against the manufacturer mechanical drawing rather than relying on generic DIP dimensions, and check connector clearance for the package body.

Treat the clock, reset, external-memory bus, and I/O pins as a tightly coupled power and signal-integrity design. Place the regulator and bulk and local decoupling capacitors near the corresponding device connections using the manufacturer layout recommendations. Confirm the supply range and operating current before selecting capacitors or a clock source; those electrical values require verification before the power design is released.

Route external program-memory address, data, and control lines with attention to clock edge relationship and bus timing. Keep the oscillator path compact and away from switching nodes and high-current relay or motor traces. If the design includes long memory-bus runs, add the required series damping or topology recommended by the manufacturer rather than assuming a generic termination value.

Do not substitute a similarly named Zilog device based only on its 8-bit architecture, 16 MHz clock, and DIP-40 package. Verify power pins, reset polarity, oscillator connection, port assignments, external-memory signals, and unused-pin requirements. A suffix change can alter package construction, temperature grade, or qualification, so obtain the ordering information and pin table before approving a replacement.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were identified for the exact MPN. Confirm the ordering suffix and manufacturer environmental documentation before using the part in regulated or automotive equipment.

Pencarian Terkait

Z8609316PSC datasheet Z8609316PSC pinout Z8609316PSC datasheet pdf Z8609316PSC DIP-40 Z8609316PSC 16MHz Z8609316PSC ROMless MCU Z8609316PSC equivalent Z8609316PSC replacement Z8609316PSC vs Z8609316PSG Z8609316PSC price Z8609316PSC stock Zilog Z8609316PSC

Komponen dan Istilah Terkait

Zilog, Inc. Z8609316PSC Z8609316PSG Z86C9325PSG Z86E8316PEG Z8 8-bit microcontroller ROMless microcontroller embedded processor external program memory 16 MHz clock PDIP-40 40-pin DIP through-hole mounting integrated circuit microcontroller embedded control industrial controller instrumentation motor and relay sequencing
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ