Z8609316PSC - 8-Bit 16MHz ROMless MCU | Zilog | DIP-40
MPN: Z8609316PSC ✓ AktifZ8609316PSC Ringkasan
A microcontroller is a compact embedded-processing component that integrates a CPU, memory interface, and peripheral functions into one device. The Z8609316PSC belongs to the Z8 family, where ROMless means the MCU does not contain the application program internally. External program memory is therefore required, and the complete memory interface and associated bus behavior must be considered when designing the PCB or upgrading an existing system.
The principal identified characteristics are an 8-bit architecture, a 16 MHz clock, ROMless program-memory organization, and a 40-pin PDIP package. The 40-pin arrangement provides a comparatively generous connection count for an 8-bit control device, while the through-hole format simplifies prototyping, socketed assemblies, and manual service. Because the MCU depends on external program memory, the complete design must also account for that memory device and its address, data, and control signals.
The Z8609316PSC is identified as a ROMless CMOS microcontroller within the Z8 product family. Its architecture is intended for small control systems where deterministic embedded-code execution, peripheral integration, and direct external-memory access are more important than a large integrated Flash footprint. The 16 MHz operating rate gives the processor more instruction throughput than lower-frequency 8-bit controllers while retaining the simple programming model and external-bus architecture characteristic of the family.
Typical uses include industrial controllers, instrumentation panels, motor and relay sequencing, legacy peripheral emulation, and embedded products that retain external EPROM or other external program memory. It can also serve as an architecture-compatible option when maintaining older Z8 hardware requires a processor upgrade without changing a through-hole board layout. Firmware, external-memory timing, input/output levels, and peripheral availability must be confirmed against the manufacturer documentation before production release.
The most important design consideration is continuity of the external memory interface. Route address, data, and control lines according to the device's electrical and timing requirements, keep the clock distribution clean, and terminate unused inputs only as directed by the manufacturer's guidance. Because the target is a legacy through-hole MCU, pay particular attention to socket selection, pin-1 orientation, supply decoupling, and the mechanical fit of the 40-pin package.
This page consolidates the identified device characteristics, sourcing information, package details, comparison fields, and engineering cautions into one practical reference. It also distinguishes confirmed identity and architecture facts from parameters that must be established from the manufacturer documentation before schematic release, firmware development, or component substitution.
Pilihan pengganti yang segera untuk Z8609316PSC — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Z8609316PSG
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
Z8609316PSC Penilaian maksimum & Ciri-ciri Elektrik
| Processor Architecture | 8-bit |
| Frekuensi Klock Maksimum | 16 MHz |
| CPU Family | Z8 |
| Program Memory Organization | ROMless |
| On-Chip Program Memory | 0 bytes (ROMless architecture) |
| Package Type | PDIP-40 |
| Total Pin Count | 40 pins |
| Mounting Technology | Through-hole |
| Package Body Width | 0.620 in |
| Package Lead Span | 15.75 mm |
| Status RoHS | Unknown |
| REACH Status | Unknown |
Panduan Konfigurasi Pin Z8609316PSC 15.75 mm
Konfigurasi pin untuk Z8609316PSC (15.75 mm pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk Z8609316PSC.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
Z8609316PSC patut untuk 6 aplikasis: Legacy Z8 Industrial Control Upgrade, Instrumentation and Measurement Panel, Motor and Relay Sequencing Controller, External-Memory Control Platform, Prototype Embedded Controller, Peripheral Emulation and Test Controller.
Legacy Z8 Industrial Control Upgrade
The Z8609316PSC fits maintenance programs for legacy Z8 industrial controllers that require an 8-bit processor, 16 MHz clock, and a 40-pin through-hole footprint. Its ROMless organization lets an updated controller retain external program memory when redesigning the processing section is undesirable. The DIP-40 package also simplifies socket-based service replacement. Before committing, verify the original controller's supply voltage, external-memory bus, port assignments, and temperature requirements against the manufacturer documentation.
Disebarkan
Instrumentation and Measurement Panel
The Z8609316PSC can support a small measurement controller built around discrete sensors, switches, and displays. Its 8-bit architecture is suitable for basic acquisition, threshold evaluation, calibration tables, and front-panel sequencing, while 16 MHz operation provides useful throughput for interrupt-driven I/O. The 40-pin PDIP format is convenient for a hand-built prototype. Firmware and external-memory timing should be validated because only the processor architecture, clock, ROMless organization, and package are confirmed here.
Disebarkan
Motor and Relay Sequencing Controller
The Z8609316PSC is applicable to simple sequencing controllers that operate relays, solenoids, indicators, and stepper-related interfaces. An 8-bit Z8 processor can implement deterministic state machines, timing tables, interlocks, and fault handling, while the 16 MHz clock provides headroom for interrupt servicing. Its 40-pin DIP package makes socketed replacement practical in mature equipment. Output-driver ratings, isolation, flyback paths, and supply requirements must be designed separately and checked against the controller's electrical limits.
Disebarkan
External-Memory Control Platform
The Z8609316PSC naturally fits a platform whose program is held in external memory rather than internal ROM. This can be useful when retaining a proven bus arrangement or supporting a memory-remapping strategy across several controller revisions. The MCU provides the 8-bit processing and 16 MHz operating point needed for compact control logic. Board designers must define the external address and data connections, decode any additional peripherals, and verify all timing from the manufacturer documentation before releasing the layout.
Disebarkan
Prototype Embedded Controller
The Z8609316PSC is well suited to breadboard, wire-wrap, and socket-based prototype development because it uses a 40-pin through-hole PDIP package. Engineers can evaluate 8-bit control code at 16 MHz without introducing a fine-pitch footprint, while the ROMless organization permits flexible external-memory experiments. For a new design, verify supply voltage, clock source, reset behavior, port direction, and every unused input. The package is convenient for prototypes, but production planning should also consider long-term availability and obsolescence risk.
Disebarkan
Peripheral Emulation and Test Controller
The Z8609316PSC can serve as the control element in a peripheral emulation fixture or legacy interface test platform. Its 8-bit processing, 16 MHz clock, and external-program-memory architecture allow compact sequences of I/O patterns, acknowledgments, timing tests, and status checks. The through-hole package permits straightforward socket replacement when a fixture is reused across several boards. The controller must be evaluated against the emulated interface's voltage, timing, and pin requirements before use, and its undocumented peripheral assignments must not be assumed.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk Z8609316PSC — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | Z8609316PSG |
|---|---|---|
| Brand | Zilog, Inc. | Zilog, Inc. |
| Package | PDIP-40 | PDIP-40 |
| Processor Architecture | 8-bit | 8-bit |
| Maximum Clock Frequency | 16 MHz | 16 MHz |
| Program Memory Organization | ROMless | ROMless |
| On-Chip Program Memory | 0 bytes | 0 bytes |
| Total Pin Count | 40 pins | 40 pins |
| Mounting Technology | Through-hole | Through-hole |
Penyeberangsung Jelas
- Confirmed 16 MHz operating rate (vsZ8609316PSG)
- Same confirmed 8-bit processing width (vsZ8609316PSG)
- ROMless organization retained (vsZ8609316PSG)
- Compatible 40-pin through-hole format (vsZ8609316PSG)
Catatan Desain
Design the PCB around a true 40-pin through-hole footprint with the correct row spacing and pin-1 orientation. The catalog identifies a 15.75 mm lead span and 0.620-inch body width. Before routing, compare the proposed footprint against the manufacturer mechanical drawing rather than relying on generic DIP dimensions, and check connector clearance for the package body.
Treat the clock, reset, external-memory bus, and I/O pins as a tightly coupled power and signal-integrity design. Place the regulator and bulk and local decoupling capacitors near the corresponding device connections using the manufacturer layout recommendations. Confirm the supply range and operating current before selecting capacitors or a clock source; those electrical values require verification before the power design is released.
Route external program-memory address, data, and control lines with attention to clock edge relationship and bus timing. Keep the oscillator path compact and away from switching nodes and high-current relay or motor traces. If the design includes long memory-bus runs, add the required series damping or topology recommended by the manufacturer rather than assuming a generic termination value.
Do not substitute a similarly named Zilog device based only on its 8-bit architecture, 16 MHz clock, and DIP-40 package. Verify power pins, reset polarity, oscillator connection, port assignments, external-memory signals, and unused-pin requirements. A suffix change can alter package construction, temperature grade, or qualification, so obtain the ordering information and pin table before approving a replacement.
Maklumat Kesediaan
No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were identified for the exact MPN. Confirm the ordering suffix and manufacturer environmental documentation before using the part in regulated or automotive equipment.