Reported by EE Journal on October 22, 2026. Summarized and analyzed by XAIPART Editorial.
What happened
STMicroelectronics expanded its MasterGaN integrated transistor-and-driver family with MasterGaN7 devices built around 650V enhancement-mode GaN transistors rated for 6A maximum current.S1 The company positioned the series for power adapters, chargers, industrial lighting equipment and solar microinverters, where higher efficiency and power density can influence converter design.S1
Each MasterGaN7 device combines two 650V GaN transistors in a half-bridge arrangement with a high-voltage, high-frequency gate driver in a QFN package that retains the pinout and footprint used by other MasterGaN devices.S1 The devices add low-dropout regulators for gate-drive voltage stabilization, a pin-driven shutdown mode and an ultra-fast wakeup function intended to reduce no-load power consumption.S1
STMicroelectronics specified a 45ns propagation delay, ultra-fast wakeup and short minimum on-time, allowing switching frequencies of up to 2MHz.S1 The design requires small external magnetic and passive components, and an integrated bootstrap diode supplies the high-side driver.S1 The broader MasterGaN family supports active-clamp flyback, asymmetrical half-bridge, inverse-buck, resonant LLC, power-factor-correction and DC-to-AC inverter topologies, with interlocking, undervoltage lock-out and thermal shutdown among the listed protections.S1
| Metric | Reported value | Source |
|---|---|---|
| Transistor voltage | 650V | S1 |
| Maximum current rating | 6A | S1 |
| Propagation delay | 45ns | S1 |
| Maximum switching frequency | 2MHz | S1 |
Background timeline
- No prior milestones disclosed by the source.
XAIPART take
Technical impact
XAIPART analysis: The combination of integrated drivers, gate-drive regulation and package compatibility could reduce external circuitry and simplify a move from earlier MasterGaN designs. Engineers should nevertheless validate the 650V/6A operating point, thermal behavior and protection interactions against the target converter rather than treating the device family as a drop-in replacement without review.S1
XAIPART analysis: The 2MHz headline capability is most useful when the power stage, magnetics, layout and control solution can support that operating point. High-frequency design work should include switching-loss, dead-time, gate-drive and EMI validation because those constraints determine whether the device family improves the final converter.
Market impact
XAIPART analysis: Package and pinout continuity may lower redesign effort for teams already using MasterGaN, while the integrated protections and smaller external component set can reduce assembly and bill-of-materials complexity. These benefits are most relevant to compact adapters, chargers and industrial power products where board area is constrained.
XAIPART analysis: Sourcing teams should request availability, lifecycle, authorized-distributor coverage and pricing for specific MasterGaN7 orderable part numbers before committing to a footprint migration. The source did not disclose lead times, pricing, production status or qualification data, so capacity and supply continuity remain unconfirmed.
Action
XAIPART analysis: Review existing MasterGaN-based designs for topology, voltage, current and package compatibility, then build a small prototype around the candidate device. Compare the board area, component count, thermal performance and conducted-emissions results against the incumbent design.
XAIPART analysis: Procurement should request manufacturer documentation, date codes, distribution status and application guidance, and should avoid consolidating new demand until lifecycle and volume-supply information is available. The source does not identify individual orderable part numbers, so sourcing should begin with the MasterGaN7 family rather than assume a specific MPN.
XAIPART Forecast
XAIPART expects MasterGaN7-based converter designs to reach a qualified switching frequency of at least 1MHz within 9 months, provided the application operates within the reported 650V and 6A limits. XAIPART analysis
Facts are as reported by the cited source. The design-in, sourcing and forward-looking statements above are XAIPART's analysis, not the source's claims. The report is a single-source product-family announcement; pricing, lead times, orderable part numbers, qualification status and volume availability were not disclosed.
Corrections: none at publication. This brief will be updated with a timestamp if the source corrects its report.
代替品とライフサイクル
| 部品 | 関係 | ライフサイクル | 根拠 |
|---|---|---|---|
| — | 登録済みの代替品はありません データ不足 | — | 前身ラベルを表示するには match_type が必要です |
「前身」および「代替」のラベルは、記録された一致タイプ、ライフサイクルステータス、またはソーステキストに基づく場合にのみ付与されます。一致が記録されていない場合、ラベルは表示されません。当社の掲載情報は市場の基準ではありません。
競合状況
- 22700 件の商品がXAIPARTのこのカテゴリに掲載されています
- 103 社のメーカー
- 68 社のメーカーが過去30日間のニュースアーカイブで言及されました
件数はXAIPARTカタログのみを反映しており、市場シェアではありません。
影響を受ける部品
カタログに一致するものはありません。 この記事は、現在XAIPARTに掲載されているどの部品にも該当しません。一致を推測することはなく、プレースホルダーのリストも表示しません。
次元別のコスト圧力
| Dimension | FRED series ID | Unit | Lag | As of |
|---|---|---|---|---|
| Input cost | PCOPPUSDM, PALUMUSDM, PNICKUSDM | USD/mt | 52 d | |
| Supply/demand | PCU334413334413, IPG3344S | index(1982=100) / index(2017=100) | 46 d | |
| FX & energy | DEXCHUS, DCOILBRENTEU, DHHNGSP | rate / USD/bbl / USD/MMBtu | 5 d |
No free authoritative interface for: gold · silver · rare earth · polysilicon · lithium carbonate · market share — listed rather than approximated.
この記事の制作方法
プロセス証跡 — 取得、ソースの妥当性、モデル、ゲート
| Source fetched | EE Journal · www.eejournal.com · 2,641 chars · fetch status success |
|---|---|
| Source sanity (S1) | ok — passed before any model call (no s1_ block recorded) |
| Model / prompt | MiniMax-M3.1-Flash · prompt Blog Agent - News Summary (v2.8-final) · 6,629 tokens · 16.4s · run completed |
| Gate | verdict pass · 6/6 applicable checks passed · spec v2.9 · C10 ratio 0.044004 · C10 rounds 0 |
上記のすべての行はパイプラインによって生成されており、手作業で書かれたものではありません。
コメント
最初のコメントを投稿しましょう。
🔐 コメントするには ログイン してください。
アカウントをお持ちでないですか？ 新規登録