Reported by EE Journal on October 22, 2026. Summarized and analyzed by XAIPART Editorial.
What happened
STMicroelectronics expanded its MasterGaN integrated transistor-and-driver family with MasterGaN7 devices built around 650V enhancement-mode GaN transistors rated for 6A maximum current.S1 The company positioned the series for power adapters, chargers, industrial lighting equipment and solar microinverters, where higher efficiency and power density can influence converter design.S1
Each MasterGaN7 device combines two 650V GaN transistors in a half-bridge arrangement with a high-voltage, high-frequency gate driver in a QFN package that retains the pinout and footprint used by other MasterGaN devices.S1 The devices add low-dropout regulators for gate-drive voltage stabilization, a pin-driven shutdown mode and an ultra-fast wakeup function intended to reduce no-load power consumption.S1
STMicroelectronics specified a 45ns propagation delay, ultra-fast wakeup and short minimum on-time, allowing switching frequencies of up to 2MHz.S1 The design requires small external magnetic and passive components, and an integrated bootstrap diode supplies the high-side driver.S1 The broader MasterGaN family supports active-clamp flyback, asymmetrical half-bridge, inverse-buck, resonant LLC, power-factor-correction and DC-to-AC inverter topologies, with interlocking, undervoltage lock-out and thermal shutdown among the listed protections.S1
| Metric | Reported value | Source |
|---|---|---|
| Transistor voltage | 650V | S1 |
| Maximum current rating | 6A | S1 |
| Propagation delay | 45ns | S1 |
| Maximum switching frequency | 2MHz | S1 |
Background timeline
- No prior milestones disclosed by the source.
XAIPART take
Technical impact
XAIPART analysis: The combination of integrated drivers, gate-drive regulation and package compatibility could reduce external circuitry and simplify a move from earlier MasterGaN designs. Engineers should nevertheless validate the 650V/6A operating point, thermal behavior and protection interactions against the target converter rather than treating the device family as a drop-in replacement without review.S1
XAIPART analysis: The 2MHz headline capability is most useful when the power stage, magnetics, layout and control solution can support that operating point. High-frequency design work should include switching-loss, dead-time, gate-drive and EMI validation because those constraints determine whether the device family improves the final converter.
Market impact
XAIPART analysis: Package and pinout continuity may lower redesign effort for teams already using MasterGaN, while the integrated protections and smaller external component set can reduce assembly and bill-of-materials complexity. These benefits are most relevant to compact adapters, chargers and industrial power products where board area is constrained.
XAIPART analysis: Sourcing teams should request availability, lifecycle, authorized-distributor coverage and pricing for specific MasterGaN7 orderable part numbers before committing to a footprint migration. The source did not disclose lead times, pricing, production status or qualification data, so capacity and supply continuity remain unconfirmed.
Action
XAIPART analysis: Review existing MasterGaN-based designs for topology, voltage, current and package compatibility, then build a small prototype around the candidate device. Compare the board area, component count, thermal performance and conducted-emissions results against the incumbent design.
XAIPART analysis: Procurement should request manufacturer documentation, date codes, distribution status and application guidance, and should avoid consolidating new demand until lifecycle and volume-supply information is available. The source does not identify individual orderable part numbers, so sourcing should begin with the MasterGaN7 family rather than assume a specific MPN.
XAIPART Forecast
XAIPART expects MasterGaN7-based converter designs to reach a qualified switching frequency of at least 1MHz within 9 months, provided the application operates within the reported 650V and 6A limits. XAIPART analysis
Facts are as reported by the cited source. The design-in, sourcing and forward-looking statements above are XAIPART's analysis, not the source's claims. The report is a single-source product-family announcement; pricing, lead times, orderable part numbers, qualification status and volume availability were not disclosed.
Corrections: none at publication. This brief will be updated with a timestamp if the source corrects its report.
대체품 및 수명 주기
| 부품 | 관계 | 수명 주기 | 근거 |
|---|---|---|---|
| — | 등록된 대체품 없음 데이터 필요 | — | 요구 사항 match_type 어떤 전임자 라벨이 표시되기 전에 |
"전임자" 및 "대체품" 라벨은 기록된 일치 유형, 수명 주기 상태 또는 출처 텍스트에서만 부여됩니다. 일치가 기록되지 않은 경우 라벨이 표시되지 않습니다. 당사 자체 등록 상품은 시장 기준이 아닙니다.
경쟁 구도
- 23331 XAIPART의 이 카테고리 활성 등록 상품
- 107 등록된 제조사
- 68 최근 30일간 뉴스 아카이브에 언급된 제조사
수치는 XAIPART 카탈로그만 반영하며 시장 점유율이 아닙니다.
영향받는 부품
카탈로그 일치 없음. 이 보도는 현재 XAIPART에 등록된 어떤 부품과도 매핑되지 않습니다. 일치를 추론하지 않으며 자리 표시자 목록도 표시하지 않습니다.
차원별 비용 압력
| Dimension | FRED series ID | Unit | Lag | As of |
|---|---|---|---|---|
| Input cost | PCOPPUSDM, PALUMUSDM, PNICKUSDM | USD/mt | 52 d | |
| Supply/demand | PCU334413334413, IPG3344S | index(1982=100) / index(2017=100) | 46 d | |
| FX & energy | DEXCHUS, DCOILBRENTEU, DHHNGSP | rate / USD/bbl / USD/MMBtu | 5 d |
No free authoritative interface for: gold · silver · rare earth · polysilicon · lithium carbonate · market share — listed rather than approximated.
이 콘텐츠의 제작 방식
프로세스 증거 — 수집, 출처 온전성, 모델 및 게이트
| Source fetched | EE Journal · www.eejournal.com · 2,641 chars · fetch status success |
|---|---|
| Source sanity (S1) | ok — passed before any model call (no s1_ block recorded) |
| Model / prompt | MiniMax-M3.1-Flash · prompt Blog Agent - News Summary (v2.8-final) · 6,629 tokens · 16.4s · run completed |
| Gate | verdict pass · 6/6 applicable checks passed · spec v2.9 · C10 ratio 0.044004 · C10 rounds 0 |
위의 모든 행은 파이프라인에서 생성되며 수작업으로 작성되지 않습니다.
댓글
첫 번째 댓글을 남겨 보십시오.
🔐 먼저 로그인 댓글을 게시하려면
계정이 없으십니까? 회원가입