開発ボード
製品 (182)
GP470-EG21-24VP - 8.9-Inch Amber HMI | Pro-face
The Pro-face GP470-EG21-24VP is an industrial human-machine interface with an 8.9-inch amber monochrome LCD, 640 x 400 pixel resolution, and two-point resistive touch support in an operator-panel package. It operates from a 24 VDC supply with a tolerance of ±20%, making it suitable for conventional industrial control cabinets. The verified product listing identifies the unit as a GP4000-series graphics panel with the same panel cut-out size as supported TFT color models available in monochrome mode. A human-machine interface, or HMI, is an industrial operator terminal that presents machine status, accepts operator commands, and bridges human interaction with PLCs, inverters, industrial computers, and controllers. In the equipment hierarchy, an HMI sits above a programmable controller or PLC as the visualization and command layer. This Pro-face model is intended to monitor and control industrial processes rather than execute application logic independently. The principal display features are the 8.9-inch amber monochrome panel, 640 x 400-pixel resolution, and two-point touch capability. Amber monochrome displays are suited to factory environments where clear process states, alarms, and numeric information must remain readily recognizable. Verified listings also associate the GP4000 platform with compatibility across multiple industrial automation brands, including Koyo, Omron, Fuji, Mitsubishi, and GE Fanuc controllers. The controller has 1 MB flash EPROM and 32 KB SRAM according to the verified distributor listing. Its stated operating range is 0°C to 50°C, while an AX Control source reports CE marking and conformity with EMC Directive EN55022 Class A and EN50082-2. These specifications place the product in industrial-panel applications where environmental behavior and electromagnetic compatibility matter. Typical uses include production-line status panels, motor and inverter control interfaces, recipe-oriented machine control, remote process monitoring, and data-logging stations. Verified material also reports recipe management, data logging, and remote connectivity functions. Printer compatibility is listed for NEC PR, Epson ESC/P24, and HP LaserJet PCL4-type printers, supporting report and label workflows. When integrating the unit, verify the controller protocol, serial communications options, panel cut-out, power budget, and point-for-point display layout before startup. Because this HMI is discontinued according to one repair-market source, new production designs should use Schneider Electric or Pro-face's current replacement-model search rather than assume long-term availability. This page consolidates the official product page, manuals, distributor information, replacement references, and compliance snippets into one engineering-oriented resource. It also distinguishes a complete HMI from touch-glass and LCD-only replacement parts, which are maintenance items rather than true drop-in controllers.
GT2715-XTBA - 15in XGA Touchscreen HMI | Mitsubishi Electric
The Mitsubishi Electric GT2715-XTBA is a 15-inch advanced Graphic Operation Terminal touchscreen HMI with a 1024 x 768 XGA TFT display, 65,536-color visualization, and an analog resistive-film digitizer. It provides 57 MB of ROM for storage and 128 MB of RAM for operation, making it suitable for data-intensive industrial automation, machine control, diagnostics, and production-line monitoring. The unit also includes two USB Type-A host connectors, one USB mini-B device connector, and a 9-pin D-sub male RS-232 interface. A human-machine interface, or HMI, is the operator-facing control layer between a person and an automated machine or process. It combines a display, touchscreen input, communications, and programmable visualization software so operators can inspect process values, issue commands, follow alarms, and perform maintenance. The GT2715-XTBA belongs to Mitsubishi Electric's advanced GOT2000 GT27 series and supports multi-touch gesture functions for intuitive interaction. Its defining features include the 15-inch XGA TFT panel, 65,536-color display, LED backlight, analog resistive touch input, and black frame. The GT27 platform is positioned for higher-capacity data processing than entry-level operator terminals, while the touchscreen provides direct access to configurable screens. The two USB host ports can support compatible peripherals, while the device port and serial interface broaden integration options where those protocols are supported by the connected equipment. The GT2715-XTBA is designed for industrial automation systems where a larger operator display improves visibility of trends, recipes, alarms, and machine status. Its XGA resolution is suitable for structured process screens, equipment dashboards, and control pages, although exact contrast, viewing-angle, environmental, ingress-protection, and electrical values must be confirmed in Mitsubishi Electric's current GT27 documentation before installation. Typical deployments include production machinery, packaging lines, material-handling equipment, factory-floor control panels, process monitoring, and machine diagnostics. The 15-inch screen provides more visible information than compact HMIs, while the resistive-film digitizer supports glove-oriented industrial interaction when specified by the system design. Backlight adjustment and screen-saver settings can help manage display life and reduce burn-in risk during idle periods. For installation, verify panel cutout dimensions, mounting orientation, power requirements, communication parameters, and compatible GOT engineering software against the official hardware documentation. Do not assume that a visually similar GT27 model is interchangeable: display size, touch technology, option interfaces, memory, and software configuration can differ. Use Mitsubishi Electric's specification, installation, and GT27 general-description documents as the controlling references.
GX39220-DNT-EVB - 96GBaud 2-Ch Linear TIA Eval Board | Renesas
The Renesas Electronics GX39220-DNT-EVB is an evaluation board for the GX39220-DNT, a dual-channel (2 x 96 GBaud) linear transimpedance amplifier (TIA) for high-speed optical communications, packaged as a development platform rather than a component in a standard semiconductor package. An evaluation board (EVB) is a printed circuit board assembled with the target IC and its supporting circuitry, connectors, and power regulation, allowing system engineers to characterize the device performance before committing to a custom PCB design. Within the product hierarchy, the GX39220-DNT-EVB sits under development tools, specifically amplifier IC development tools, supporting the GX39220 telecom IC family used in coherent and PAM-4 optical receivers. The underlying GX39220 integrates two TIA signal paths for the I and Q channels, a key requirement for dual-polarization coherent optical receivers where the in-phase and quadrature signals must be amplified with matched gain and phase. According to the Renesas GX39220 datasheet, the high-performance, low-power, and compact design of the GX39220 enables small-form-factor integrated optical modules such as CFP2 and CFP4. Key technical characteristics of the evaluated device include support for 96 GBaud line rates per channel, linear TIA transfer behavior suitable for DSP-based PAM-4 and coherent receivers, dual-channel integration for I/Q signal paths, and low power consumption appropriate for pluggable module thermal budgets. The evaluation board exposes the TIA inputs and outputs through high-speed RF connectors and provides power and control interfaces for benchtop characterization with sampling oscilloscopes and bit-error-ratio testers. Typical applications for this evaluation platform include 400G/800G coherent optical transceiver prototyping, CFP2-DCO and CFP4 module development, PAM-4 receiver chain characterization, and optical component vendor interop testing in data center interconnect (DCI) and telecom line-card development. When using the board, engineers should follow Renesas application guidance on differential input biasing and output match, since linear TIAs are sensitive to input capacitance and layout parasitics that degrade bandwidth and group-delay flatness. This page synthesizes distributor pricing, availability, datasheet links, and practical usage notes for the GX39220-DNT-EVB evaluation platform not consolidated in the manufacturer datasheet.
GX76476-DNT-EVB - 4x64Gbaud Linear Driver Eval Board | Renesas
The Renesas GX76476-DNT-EVB is an evaluation board for the GX76476-DNT, a low-power, high-performance quad-channel linear differential I/O driver supporting 4 x 64Gbaud operation, targeting 400G/600G optical integrated transmitter small form factor (SFF) modules for metro and long-haul applications, and mounting the driver die with SPI-based DC control circuitry on a dedicated PCB platform. An evaluation board (EVB) is a printed circuit board platform that hosts a target integrated circuit together with the power distribution, signal routing, biasing, and control interfaces required to exercise it outside of a finished product. In the optical-transceiver hierarchy, the driver sits between the DSP/CMOS serializer and the electro-absorption-modulated laser (EML) or silicon-photonics modulator, converting low-swing differential electrical signals into the larger modulator drive swings, making the EVB the fastest path from datasheet review to real eye-diagram measurements. Key technical elements of the underlying GX76476 include four integrated driver lanes on a single die, 100 ohm differential AC-coupled inputs per channel, and on-chip SPI circuitry for per-channel DC control, allowing fine adjustment of bias and modulation conditions during optical characterization. The quad-lane integration reduces component count and channel-to-channel skew compared with four single-channel drivers, which matters directly in dense SFF optical module layouts where board area and routing symmetry are constrained. Architecturally, the linear (non-limiting) driver design preserves waveform linearity so that the downstream modulator and DSP equalization can optimize system performance, a key requirement in 400G/600G PAM-4 style link budgets. Low power operation supports the thermal budget of small form factor modules used in metro and long-haul coherent or direct-detect transport systems. Typical use cases include evaluating the GX76476 for 400G and 600G integrated transmitter modules, performing eye and jitter characterization with sampling oscilloscopes, validating SPI-based DC control firmware before module production, and comparing driver performance against competing linear drivers during platform selection. A key design consideration is signal integrity at the test interface: at 64Gbaud, connector losses, via stubs, and cable quality dominate measurement fidelity, so users should employ calibrated cables and short launch structures when probing the evaluation board. This page adds value beyond the manufacturer datasheet by aggregating distributor availability from DigiKey, Mouser, Octopart and TrustedParts, structured specifications, application guidance, and design notes in one AI-citable reference.
HCI-CPU-A9254 - AMD EPYC 9254 24-Core 2.9GHz CPU | Cisco
The Cisco HCI-CPU-A9254 is a server processor upgrade module based on the AMD EPYC 9254, a 4th-generation EPYC 9004-series CPU with 24 cores, a 2.9 GHz base clock, 128 MB of L3 cache, a 200 W thermal design power, and support for DDR5 memory at 4800 MT/s. The processor is packaged for Cisco UCS and Hyperconverged Infrastructure (HCI) server platforms using the Socket SP5 (LGA-6096) land grid array interface. A server processor (CPU) is the central compute engine of a data center server, sitting at the top of the compute hierarchy: microprocessor -> multi-core server processor -> server platform -> data center infrastructure. The EPYC 9004 family, codenamed Genoa, uses AMD's Zen 4 core architecture on a 5 nm process with a chiplet design in which up to 12 core-complex dies connect to a single I/O die via AMD Infinity Fabric. Key features of the EPYC 9254 include 24 Zen 4 cores with simultaneous multithreading for 48 threads, a large 128 MB shared L3 cache, PCIe Gen5 connectivity for high-bandwidth accelerators and NVMe storage, and DDR5-4800 memory support delivering dramatically higher bandwidth than the prior DDR4 generation. The 200 W default TDP offers a balanced performance-per-watt profile for dense virtualization workloads. In the Cisco HCI variant, the processor is validated and supported for Cisco Hyperconverged Infrastructure nodes, where compute, storage, and networking are consolidated on one platform. Typical applications include virtualization clusters, private cloud, software-defined storage, database servers, and data analytics. According to AMD, the EPYC 9004 series targets modern data centers requiring exceptional time-to-results and energy efficiency. Design and integration considerations: verify Socket SP5 motherboard support, BIOS/firmware qualification in the Cisco UCS Hardware Compatibility List, adequate VRM delivery for the 200 W TDP, and high-performance cooling. Memory channel population should follow the vendor configuration guide to achieve full DDR5-4800 bandwidth. This page synthesizes distributor pricing, Cisco family cross-references (UCS-CPU-A9254, HCIX-CPU-A9254), and integration guidance not found in a single datasheet, providing engineers and buyers with one consolidated, verifiable reference.
HCI-CPU-A9554 - EPYC 9554 64-Core 3.1GHz SP5 CPU | Cisco
The Cisco HCI-CPU-A9554 is a Cisco-validated server processor kit carrying the AMD EPYC 9554, a 64-core / 128-thread data center CPU clocked at a 3.1 GHz base frequency, with 256 MB of L3 cache, a 360 W TDP, DDR5-4800 memory support, and a Socket SP5 (LGA-6096) package. It is qualified for Cisco UCS and Cisco Compute Hyperconverged (HCI) M-series servers such as the UCSX 215C M8. A server processor, or CPU, is the central compute engine of a data center server, sitting at the top of the compute hierarchy (CPU -> compute node -> server -> rack -> data center). The AMD EPYC 9554 belongs to the 4th Generation EPYC 9004 "Genoa" family built on the Zen 4 architecture, launched in November 2022. Compared with prior generations, Genoa doubles core counts per socket and transitions to DDR5 and PCIe 5.0 I/O. Key features of the HCI-CPU-A9554 include 64 physical Zen 4 cores with SMT for 128 threads, a large 256 MB L3 cache that keeps hot datasets on-chip, DDR5-4800 memory channels for bandwidth-hungry workloads, and PCIe 5.0 connectivity to NVMe storage and accelerators. The 360 W TDP enables sustained all-core throughput in thermally capable chassis. Architecturally, the Zen 4 core uses an optimized pipeline with wider execution and AVX-512 support, while the chiplet-based design separates compute core-complex dies from the I/O die, improving manufacturing yield and scalability across the EPYC 9004 stack. Typical applications include hyperconverged infrastructure (HCI) clusters running Nutanix or VMware, high-density virtualization, databases and analytics, and HPC workloads that exploit high multithreaded throughput and large L3 cache. Design consideration: confirm your Cisco server chassis thermal solution and PSU budget support the 360 W TDP before upgrade, and match DDR5 DIMM speed to 4800 MT/s to avoid memory downclocking. This page synthesizes distributor pricing, drop-in alternative PIDs, and practical upgrade guidance not found in a single datasheet.
HCI-CPU-A9654 - AMD EPYC 9654 96-Core 2.4GHz CPU | Cisco
The Cisco HCI-CPU-A9654 is an OEM server processor based on the AMD EPYC 9654, delivering 96 cores and 192 threads at a 2.4 GHz base clock with a 360W thermal design power, 384 MB of L3 cache, and support for 12-channel DDR5-4800 memory in the SP5 (LGA-6096) socket package. A server processor (CPU) is the central compute element of a data center server, sitting at the top of the compute hierarchy: microprocessor -> server processor -> compute node -> server -> data center infrastructure. The EPYC 9004 series represents AMD's fourth-generation server platform, code-named Genoa, built to serve modern cloud, virtualization, and enterprise workloads. Key features of this part include an industry-leading 96-core density in a single socket, a large 384 MB L3 cache that reduces memory latency for database and analytics workloads, 12-channel DDR5-4800 memory support (up to 460.8 GB/s bandwidth per socket), and PCIe Gen5 I/O for high-speed NVMe storage and 400G networking. The 5nm chiplet architecture with Zen 4 cores balances per-core throughput against energy efficiency. Architecturally, the EPYC 9654 uses multiple Zen 4 CCD chiplets bonded to a central I/O die on the SP5 socket, providing 128 usable PCIe Gen5 lanes per processor - roughly double the I/O of competing single-socket platforms - which reduces the need for additional switch silicon in storage and composable infrastructure designs. Typical applications include Cisco UCS X-Series and HCI (hyperconverged infrastructure) nodes, large-scale virtualization and VDI farms, in-memory and relational databases, AI/ML data preprocessing, and high-density cloud-native container platforms where core count and memory bandwidth dominate performance. Design and deployment consideration: at 360W TDP, this processor requires validated server-level cooling and power delivery; it must only be installed in Cisco platforms listed on the Cisco UCS Hardware Compatibility List, as firmware and thermal profiles are platform-specific. This page synthesizes distributor pricing, Cisco SKU cross-references, and deployment guidance not found in the manufacturer datasheet. Pricing shown as of 2026-10-19.
HCI-GPU-A16 - Cisco NVIDIA A16 64GB PCIe GPU Card
The Cisco HCI-GPU-A16 is a Cisco-branded integration of the NVIDIA A16 data center GPU: a PCI Express Gen4 x16 add-in card with 64 GB of GDDR6 memory, a 250 W maximum board power limit, and a full-height, full-length (FHFL), dual-slot form factor containing four discrete GPUs on a single board (4 x 16 GB). A GPU (graphics processing unit) add-in card is a board-level accelerator that offloads parallel compute, graphics rendering, and video encode/decode work from the host CPU. In the data center hierarchy, a GPU card sits within the server hardware layer of the compute infrastructure stack, above the PCIe backplane and below hypervisor and virtualization software. The NVIDIA A16 was purpose-built for high-user-density Virtual Desktop Infrastructure (VDI), where many concurrent virtual desktops share one accelerator. Key features include four GPUs per board for maximum user density per PCIe slot, PCI Express Gen4 x16 host bandwidth for low-latency frame delivery, and 64 GB of total GDDR6 memory that pools across the four GPU dies. When paired with NVIDIA Virtual PC (vPC) or NVIDIA vGPU software licenses, the A16 supports NVENC/NVDEC video encode and decode per GPU, which is critical for smooth remote-media user experience. The board uses a passive heatsink design intended for servers with directed airflow, such as Cisco UCS C-Series and HyperFlex (HCI) M6-generation nodes, where chassis fans provide the required airflow. The dual-slot width and 250 W power budget mean the host server must provide a compatible dual-slot PCIe Gen4 riser slot and adequate power cabling. Typical applications include enterprise VDI farms, AI inference at scale across many small models, video transcoding and streaming infrastructure, and GPU-accelerated virtual workstations for CAD and creative users. When designing the deployment, verify server compatibility (Cisco HyperFlex/UCS validated configurations), airflow direction, and NVIDIA software licensing before ordering. Estimated density planning: one A16 commonly serves 16 to 32 concurrent knowledge-worker vGPU users depending on profile size. This page synthesizes distributor pricing signals, cross-brand context, and deployment design guidance not found on any single vendor datasheet.
JN5189-DK006 - JN5189 Zigbee/Thread Development Kit | NXP Semiconductors
The NXP Semiconductors JN5189-DK006 is an advanced development kit for the JN518x family of ultra-low-power, high-performance Arm Cortex-M4 wireless microcontrollers, operating at 2.4 GHz and supporting IEEE 802.15.4 protocols including Zigbee 3.0, Thread, and other mesh networking standards. The kit is built around the JN5189 carrier board (OM15076, also called DK6) and is bundled with multiple application boards to enable rapid prototyping of Home Automation, Smart Lighting, and wireless sensor network products. A wireless MCU (microcontroller unit with integrated radio) is a single-chip solution that combines an application processor, memory, peripherals, and a 2.4 GHz radio transceiver. Within the broader taxonomy, wireless MCUs sit inside the categories of microcontrollers -> integrated circuits -> semiconductors. They differ from standalone transceivers by embedding processing capability, eliminating the need for a separate host MCU and reducing bill-of-materials cost, PCB area, and power consumption in connected-node designs. Key features of the JN5189-DK006 include a multi-board kit containing a control bridge with NFC reader, generic switch node, light/sensor node, and USB dongle for assembling a small wireless mesh network out of the box. The kit is supported by NXP's MCUXpresso IDE and the JN5189 SDK, providing Zigbee 3.0, Thread, and Bluetooth LE stacks depending on firmware variant. The JN5189 silicon itself integrates an Arm Cortex-M4 core with FPU, up to 640 KB flash, 152 KB SRAM, and an ultra-low-power 2.4 GHz IEEE 802.15.4 radio, allowing coin-cell battery operation in end-node roles. Typical applications enabled by the kit include Zigbee and Thread mesh networks, Matter-ready smart-home devices, wireless light bulbs and dimmers, battery-powered door/window sensors, and BLE-to-Thread/Zigbee bridges. The bundled NFC tag reader on the control bridge simplifies commissioning for end-products, mirroring the user experience of mainstream smart-home ecosystems. When designing with the kit, designers should plan for an external antenna footprint matching the JN5189 carrier RF path and verify regulatory compliance for the target region (FCC, ETSI, MIC). The kit is a development tool, not a finished product - select the JN5189 silicon directly for volume production. This page synthesizes distributor pricing, bundled kit contents, application examples, and practical design notes not found in the manufacturer datasheet alone, helping engineers select between the JN5189-DK006 and the related K32W061-based IOTZTB-DK006 advanced kit.
KIT-PCA9460-EVB - PCA9460 PMIC Evaluation Board | NXP
The NXP KIT-PCA9460-EVB is an evaluation and demonstration board for the PCA9460, a general-purpose single-chip 13-channel power management IC (PMIC) designed to support microcontrollers and microprocessors in consumer and industrial applications. The board provides a complete platform for evaluating the PCA9460's four high-efficiency 1 A step-down regulators, four VLDOs, one SVVS LDO, and four 150 mohm load switches. An evaluation board is a printed-circuit assembly that exposes all functional pins and power rails of a target IC through connectors, test points, and configuration options, allowing engineers to validate power-tree designs before committing to custom PCB layout. Evaluation boards sit within the broader hierarchy of development platforms: component -> evaluation module -> development board -> complete reference design -> end product. Key features of the KIT-PCA9460-EVB include full compatibility with the i.MX 8ULP processor family, a 13-channel power architecture optimized for ultra-low-power operation, and flexible configuration of the buck regulators, LDOs, and load switches. The PCA9460 itself is provided in a WSCSP42 wafer-level chip-scale package, and the evaluation board demonstrates the recommended external component network, layout practices, and power sequencing. Technically, the PCA9460 integrates four high-efficiency step-down (buck) regulators rated at 1 A each, four very-low-dropout (VLDO) regulators, one SVVS LDO, and four load switches with only 150 mohm on-resistance, minimizing voltage drop and power loss in battery-powered systems. This level of integration reduces board area and total bill-of-materials cost compared with discrete power solutions. Typical applications evaluated with this board include smart home devices, building safety and security products, wearables, and smart and medium appliances - all domains where the ultra-low-power profile of the PCA9460 and the i.MX 8ULP processor family deliver long battery life. Industrial microcontroller-based systems can also be prototyped. A key design consideration when transitioning from the evaluation board to production is that the WSCSP42 package requires microvia and blind-via PCB technology, as noted in NXP community discussions; engineers should plan fabrication capability accordingly. This page synthesizes distributor availability data, manufacturer documentation, and practical design guidance - including PCB via-technology caveats - not found in a single source, providing unique selection value for engineers evaluating the PCA9460 PMIC platform.
KSZ8041NL-EVAL - Ethernet PHY Evaluation Board | Microchip
The Microchip Technology KSZ8041NL-EVAL is an evaluation board for the KSZ8041NL, a single-supply 10BASE-T/100BASE-TX Ethernet physical layer transceiver (Ethernet PHY) with MII and RMII media-independent interfaces. An Ethernet PHY (physical layer transceiver) is the integrated circuit that sits between a MAC (media access controller) and the RJ45 twisted-pair cable plant, performing line coding, echo cancellation, and analog front-end functions defined by the IEEE 802.3 standard. In the product hierarchy, the PHY belongs to Ethernet ICs, under interface and networking semiconductors, under mixed-signal integrated circuits. The KSZ8041NL on this board is packaged in a 32-pin, lead-free MLF (QFN per JEDEC) package. Key features demonstrated by this evaluation platform include single-supply operation, a unique mixed-signal design that extends signaling distance while reducing power consumption, MII and RMII host interfaces, and HP Auto MDI/MDIX support. The KSZ8041NL is positioned for 10Base-T/100Base-TX applications with tight PCB board-space constraints. Architecturally, the KSZ8041NL combines a mixed-signal analog front end with digital interface logic, supporting both the 16-bit MII data interface and the pin-reduced RMII interface for microcontrollers and embedded MACs. Note that the KSZ8041NL variant requires an external 50 MHz RMII clock, unlike the KSZ8041RNL variant which can generate the 50 MHz clock from a 25 MHz crystal input. Typical evaluation use cases include verifying Ethernet PHY connectivity for industrial automation nodes, embedded networking modules, and IoT gateways before committing to a custom PCB design. A key design consideration: the board can use its 40-pin male edge connector (J2) with minor population changes to interface with RMII MACs, and Auto MDIX operation requires symmetrical (Auto MDIX style) magnetics per the Microchip hardware design checklist. This page synthesizes distributor availability, board-user-guide details, and drop-in alternative analysis not consolidated in the manufacturer documentation.
LBAA0QB1SJ-TEMP-EVK - LoRaWAN Type 1SJ Eval Kit | Murata
The Murata Electronics LBAA0QB1SJ-TEMP-EVK is an evaluation board for the Type 1SJ (LBAA0QB1SJ) LoRa (LoRaWAN) sub-GHz transceiver module, supporting the 868 MHz, 915 MHz, and 923 MHz ISM bands from a 3.3 VDC supply. An evaluation kit (EVK) is a development board that lets engineers prototype, test, and validate a module before committing to a production PCB design. In the wireless connectivity hierarchy, this board sits in the LPWAN (low-power wide-area network) category alongside LoRaWAN gateways and end-node reference designs, bridging the gap between a datasheet and a certified commercial product. Key features of the kit include access to all of the Type 1SJ module interfaces, an onboard 3.3 V LDO regulator that can power the module by shorting jumper J3, and support for test commands and firmware upgrade procedures described in the V2.0 user manual. The underlying Type 1SJ module is described by Murata as one of the smallest LoRaWAN modules in the industry, with lower power consumption and higher output power than previous Murata LoRa products, plus an open MCU design. The Type 1SJ platform has radio law certifications already obtained for major regions, which shortens the compliance path for products developed with the kit. Because the MCU is open, developers can port their own firmware, including LoRaWAN stacks, and the ST community has discussed adapting the I-CUBE-LRWAN expansion package to run on this hardware. Typical use cases include evaluating LoRaWAN link budgets in the 868/915/923 MHz bands, prototyping smart-metering and IoT sensor nodes, validating AT-command based module integration, and training engineering teams on LoRa modulation before production layout of the bare module. When working with the kit, configure the 3.3 V power source first: either supply your own 3.3 V rail or short J3 to use the onboard LDO, per the V2.0 user manual. Always verify antenna attachment before transmitting to avoid PA damage. This page synthesizes distributor availability, user-manual setup details, and practical development notes that go beyond the Murata datasheet.
LBAD0XX1SC-DM-EVK-B - LTE Cat M1/NB-IoT Eval Kit | Murata
The Murata Electronics LBAD0XX1SC-DM-EVK-B is an evaluation board for the LBAD0XX1SC Type 1SC LTE Cat M1 and NB-IoT module, based on the Altair ALT1250 transceiver, covering 699 MHz to 960 MHz and 1.71 GHz to 2.17 GHz cellular bands with GNSS (GPS, GLONASS) positioning support. An LTE Cat M1/NB-IoT evaluation kit is a hardware development platform that lets engineers interface with a cellular LPWA module over USB or UART before committing to a custom PCB design. In the wireless connectivity hierarchy, it sits at the prototyping level: cellular module -> LPWA connectivity module -> wireless development board -> development tools. Evaluation kits typically expose the module's key interfaces (UART, USB, SIM, RF) and include antennas and power circuitry so firmware and network registration can be tested out of the box. The kit includes the Type 1SC evaluation board, two mini USB cables, and a quick start guide. The evaluation board features an Arduino shield interface, a micro SIM slot, three status LEDs, an SMA connector for RF testing, and an included LTE/GNSS antenna. Power comes from a USB host or an external 5V supply, which onboard LDOs convert to 3.3V and 1.8V rails for the onboard circuits. The underlying LBAD0XX1SC module is a compact, low-cost LTE-M module compliant with 3GPP release 14 specifications. It measures approximately 11.1 x 11.4 x 1.4-1.5 mm, is built in a silver resin shielded package, and integrates an Altair ALT1250 transceiver with an FEM, external 16 MByte flash memory, and an integrated low-drift TCXO. It supports LTE Cat M1 and LTE NB1 at 23 dBm nominal output power and features LTE-M PSM and eDRX low-power modes for battery-powered designs. Typical applications to prototype with this kit include smart meters, smart watches, medical and healthcare devices, e-bikes, and fleet management trackers - all deployments where narrowband cellular IoT connectivity and years of battery life matter. A key design consideration: the board provides VCOM/UART access with configurable jumpers; the Murata community documents AT+IFC=0,0 and AT+IPR=115200 settings and jumper configurations for connecting 3.3V-IO MCU development boards via isolated UART. This page synthesizes distributor availability data, kit contents, module specifications, and practical setup notes not consolidated in the manufacturer datasheet.
LBEU5ZZ1WL-857EVB - LoRa WiFi BLE GNSS Eval Board | Murata
The Murata LBEU5ZZ1WL-857EVB is the official evaluation board (Type 1WL-857 EVB) for the Murata Type 1WL-857 (LBEU5ZZ1WL-857) multi-technology fused LoRaWAN geolocation module, which integrates a Semtech LR1110 transceiver for LoRa, IEEE 802.11 b/g/n Wi-Fi passive scanning, GNSS, and an STMicroelectronics STM32WB55VGY6 microcontroller for Bluetooth 5.2 LE and application processing. An evaluation board is a hardware development platform that exposes all functional interfaces of a core module - power, RF antenna ports, UART/SPI/I2C debug links, GPIO and programming headers - so firmware and RF performance can be characterized before committing to a custom PCB. In the product hierarchy, it sits above the surface-mount module itself and below production hardware, serving as the reference design anchor for OEM integrators. Key capabilities of the underlying module include ultra-low power operation for long battery life, superior RF sensitivity for weak-signal GNSS and LoRa reception, and high flexibility for building low-cost IoT tracking devices in both indoor and outdoor environments. Multi-technology fusion - GPS/GNSS, GPS sniffing, Wi-Fi sniffing, BLE sniffing, and LoRa radio triangulation - allows the same hardware to localize assets where a single technology fails, such as deep indoor or dense urban canyons. When paired with Actility ThingPark geolocation services, raw RF listening data is converted into actionable position fixes. The board is certified under the module's Single Modular Approval: FCC ID VPYLB1WL and IC 772C-LB1WL. Note the module is limited to OEM installation; the OEM integrator is responsible for ensuring the end user cannot remove or install the module in production hardware. During development on the EVB this restriction does not apply. Typical applications include asset trackers, fleet management devices, cold-chain loggers, smart-city sensors, and any battery-powered device requiring hybrid indoor/outdoor positioning. Engineers use the EVB to validate antenna selection (antenna not included with the module), measure current consumption profiles, and prototype firmware on the STM32WB55 before board spin. A key design consideration: because four radios share one RF ecosystem, antenna placement and isolation measurements performed on this EVB should be replicated carefully in production layouts, as the module itself ships without an antenna. This page synthesizes distributor listings, Murata datasheet references, certification identifiers, and practical integration notes not consolidated in the manufacturer datasheet alone. Pricing for LBEU5ZZ1WL-857EVB as of 2026-10-19 is not published in standard distribution catalogs and is available on request.
LBMA0ZZ2NR-EVK - BLE 6.0 / 802.15.4 Type 2NR Module Eval Kit | Murata
The Murata LBMA0ZZ2NR-EVK is an evaluation and application development kit for the Murata Type 2NR wireless module (LBMA0ZZ2NR-001), a 2.4 GHz multiprotocol module supporting Bluetooth Low Energy 6.0, IEEE 802.15.4 (Matter, Thread, Zigbee), and NFC-A tag functionality, based on the Nordic nRF54L15 SoC. An evaluation kit (EVK) is a hardware development platform that exposes all pins and interfaces of a wireless module so firmware engineers can prototype, program, and validate RF performance before committing to a custom PCB. Connectivity modules sit within the broader hierarchy of RF transceivers, wireless SoCs, and power management for IoT nodes, and the EVK is the standard first step in any Matter-over-Thread or BLE product development workflow. The kit demonstrates the key attributes of the Type 2NR module: an ultra-small 7.4 mm x 7.0 mm footprint with a PCB trace antenna, integration of Bluetooth LE 6.0, IEEE 802.15.4, and NFC-A tag in a single certified module, and the high performance and low power of the Nordic nRF54L15 SoC. Firmware development is supported through the Nordic nRF Connect SDK and Zephyr RTOS ecosystem, enabling multiprotocol stacks such as Matter over Thread out of the box. Architecturally, the Type 2NR module integrates the nRF54L15 SoC with its RF matching network, 32 MHz crystal, and antenna passives, eliminating the most error-prone RF layout tasks from the end-product design. The EVK board (per the published BOM) provides USB connectivity, battery holder, switching transistors, ferrite bead EMI filtering, and a KDS 32 MHz crystal, giving access to GPIO, UART/SPI/I2C, and analog functions for rapid prototyping. Typical applications include smart home and Matter device development, Bluetooth LE sensor nodes, Thread border-router peripherals, NFC-assisted device commissioning, and battery-powered IoT products. The EVK lets engineers validate range, power consumption, and antenna performance of the Type 2NR module before designing the module into a production PCB. A key design consideration: because the module is only 7.4 x 7.0 mm with an integrated PCB trace antenna, keep-out and ground-plane requirements on the production board must mirror the EVK layout to preserve RF performance. This page synthesizes distributor availability, module specifications, drop-in evaluation alternatives, and practical design notes not found in the manufacturer product brief.
MCIMX53EVK - i.MX53 ARM Cortex-A8 Dev Kit | NXP Semiconductors
The NXP Semiconductors MCIMX53EVK is the i.MX53 Platform Development Kit, an evaluation platform built around the i.MX53 applications processor family with an ARM Cortex-A8 core. The kit exposes the full multimedia and connectivity capability of the i.MX53 SoC, including hardware-accelerated video encode/decode, dual-display support, and multiple connectivity peripherals, packaged as a ready-to-run reference platform for embedded product prototyping. A development kit (EVK) is a manufacturer-curated reference board that combines a target application processor, validated power tree, expansion headers, display interfaces, and pre-loaded demo firmware. It allows firmware engineers, hardware engineers, and system architects to evaluate the host processor, characterize peripherals, and benchmark software frameworks (Linux, Android, WinCE) before committing to a custom PCB layout. The kit category sits between evaluation modules (system-on-modules) and full product reference designs and is the typical first purchase for any new i.MX project. Key features of the MCIMX53EVK include the i.MX53 ARM Cortex-A8 SoC at up to 1 GHz, DDR2/DDR3 memory support, an LVDS dual-display interface, hardware video accelerators (VPU, GPU2D/3D), 10/100 Ethernet, USB 2.0, SATA, HDMI, and an audio codec. Expansion is provided through the i.MX53-compatible board-to-board connectors, a debug UART, and JTAG for ARM CoreSight trace. The kit ships with a Linux BSP and documentation for quick out-of-box demo bring-up. The platform targets automotive infotainment, industrial HMI panels, medical patient-interface displays, and rich multimedia appliances. It demonstrates how to terminate the i.MX53's high-speed signal lanes, sequence its multiple power rails, and route the LVDS/HDMI video outputs. Designers using the kit as a starting reference can directly copy sections of its schematic into their own carrier board, shortening electrical validation cycles. When designing with this kit, plan for the higher-than-typical thermal envelope of the i.MX53 SoC and the careful decoupling required by its multi-rail power tree. Engineers typically use the EVK to validate the BSP and software stack before transitioning to a custom board or a System-on-Module.
MM8108-EKH05-01 - Wi-Fi HaLow IoT Eval Kit | Morse Micro
The Morse Micro MM8108-EKH05-01 is an IEEE 802.11ah (Wi-Fi HaLow) evaluation kit covering 850 MHz to 950 MHz, built around the MM8108-MF15457 Wi-Fi HaLow module with an STM32U585 low-power microcontroller and a BlueNRG-M2 Bluetooth SoC. A Wi-Fi HaLow development platform is a hardware-plus-software toolchain that lets engineers prototype long-range, low-power sub-1 GHz wireless links before committing to custom PCBs. Wi-Fi HaLow (IEEE 802.11ah) operates in sub-1 GHz spectrum, trading raw throughput for roughly ten times the range and far lower power than 2.4 GHz Wi-Fi, making it a member of the low-power wide-area IoT connectivity family alongside LoRa and 802.15.4-based systems. Key features of this kit include the MM8108 single-chip 802.11ah SoC with radio, PHY and MAC integrated on one die, PHY rates up to 43.3 Mbps using 256-QAM modulation at 8 MHz bandwidth, and dual wireless stacks (Wi-Fi HaLow plus Bluetooth via the BlueNRG-M2). On-board sensors and expansion headers enable rapid prototyping of end nodes. According to the Morse Micro product brief, the MM8108-EKH05-01 is a fully integrated Wi-Fi HaLow development platform for a wide range of IoT applications. The board is supported out-of-the-box by the Morse Micro IoT SDK (platform mm-mm8108-ekh05), which uses the STM32U585VIT6Q MCU as the host processor, and a hardware design package with schematics, layout and BOM is available for custom hardware development. Typical applications include smart home devices, industrial automation systems, long-range low-power sensor networks, and Wi-Fi HaLow client development when paired with a Morse Micro access point. Developers can test long-range, low-power connectivity out of the box. Design consideration: evaluate the sub-1 GHz regulatory domain of your target market, since the 850-950 MHz operating window must match regional spectrum rules. This page synthesizes distributor availability data, Morse Micro SDK documentation, and drop-in platform comparisons not found in the manufacturer product brief.
MM8108-EKH19-01 - Wi-Fi HaLow Eval Kit | Morse Micro | 802.11ah
The Morse Micro MM8108-EKH19-01 is a Wi-Fi HaLow (IEEE 802.11ah) evaluation kit built around a USB 2.0 network adapter reference design based on the MM8108 System-on-Chip (SoC), supplied with an SMA Wi-Fi HaLow antenna and a Wi-Fi 6 GL-MT3000 router. The MM8108 SoC operates across the 850 MHz to 950 MHz sub-GHz HaLow bands and also covers 2.4 GHz and 5 GHz, supporting PHY rates up to 43.3 Mbps using 256-QAM modulation at 8 MHz bandwidth. An evaluation kit (evkit) is a pre-assembled hardware platform that lets engineers test, prototype, and validate a wireless or semiconductor device before committing to a custom PCB design. In the wireless development hierarchy, it sits above the bare SoC and below production hardware, typically including reference schematics, a reference antenna, and companion host hardware. Key features of the MM8108-EKH19-01 include the MM8108 SoC with integrated radio, PHY, and MAC fully compliant with IEEE 802.11ah; a USB 2.0 network adapter form factor that connects to any Windows computer without custom carrier hardware; transmit power up to 26 dBm through an external SMA antenna; and an included Wi-Fi 6 (GL-MT3000) travel router for demonstrating HaLow-to-Wi-Fi-6 bridging in real network scenarios. The underlying MM8108 SoC is a single-chip solution incorporating radio, PHY, and MAC functions compliant with the IEEE 802.11ah standard, delivering world-leading power efficiency and class-leading sub-GHz throughput. The kit is built on the RD09 reference design, and Morse Micro publishes the full RD09 Reference Design Package (schematics, layout files, and bill of materials) so customers can build compliant USB dongles or embed Wi-Fi HaLow connectivity directly into their own products. Typical applications include long-range, low-power IoT connectivity evaluation, smart city and industrial sensor networks, security cameras over sub-GHz links, and mesh networking trials using 802.11s. The kit demonstrates the simplicity and cost-effectiveness of adding Wi-Fi HaLow to an existing or new design using a USB 2.0 interface. Design consideration: community testing shows the EKH19 USB adapter supports channel bandwidths up to 2 MHz with auto channel selection, so interoperability testing with fixed 1 MHz-channel devices (for example MM6108-based EU 863-870 MHz products) should be planned carefully. This page synthesizes distributor pricing, equivalent-kit options, and practical deployment notes not found in the manufacturer product brief.
NAFE13388-EVB - Evaluation Board for 24-bit 8-ch AFE | NXP
The NXP NAFE13388-EVB is an evaluation board for the NAFE13388, a highly configurable industrial-grade universal ±25 V 8-input low-power analog front-end (AFE) with excitation sources, 24-bit resolution and a PGA gain range of 0.2 V/V to 16 V/V. The board enables fast evaluation of high-precision multichannel data acquisition. An evaluation board (EVB) is a printed-circuit platform that lets engineers assess an integrated circuit without designing custom hardware. In the data-conversion hierarchy, it belongs to development tools supporting analog front-end ICs: the AFE chip, then the ADC signal chain, then the complete measurement system. EVBs typically expose all signal pins, jumpers for configuration, and connectors to a host controller. The NAFE13388-EVB is designed for the NAFExx388 family and connects to an NXP LPC54628 MCU board, allowing easy configuration and reading of measurement data through a dedicated PC GUI, per the NXP product page. This shortens the path from lab evaluation to production design. The underlying NAFE13388 provides 1 Gohm high input impedance and input leakage below 5 nA at 105 C, which, combined with its low-noise, low-offset-drift PGA, makes it well suited for precision temperature measurement with RTD and thermocouple sensors, according to the NXP datasheet (Rev. 4, 2 April 2024). The eight HV analog inputs can be configured from eight single-ended to four differential channels with AICOM or AGND reference. Typical evaluation scenarios include industrial sensor acquisition modules, battery test equipment, and building automation analog inputs. The integrated excitation sources support direct RTD and current-loop sensor evaluation. When evaluating, note that the AFE integrates diagnostics; the GUI exposes configuration registers, so review the datasheet register map before scripting automated tests. This page synthesizes distributor availability data, datasheet highlights, and practical evaluation guidance not consolidated in the manufacturer datasheet.
NAFE13388-UIM - 8-Channel Universal AFE Arduino Shield | NXP
The NXP Semiconductors NAFE13388-UIM is an 8-channel universal-input analog front-end (AFE) Arduino shield evaluation board for the industrial-grade NAFExx388 AFE family, supporting voltage inputs up to ±25 V with integrated excitation sources and low-power operation. An analog front-end (AFE) is the circuit stage that conditions and digitizes real-world analog signals - voltage, current, and temperature - before they reach a microcontroller or processor. Within the signal-chain hierarchy (sensor -> AFE -> MCU), the AFE performs input scaling, excitation, diagnostics, and precision conversion. Industrial-grade multichannel AFEs like the NAFE13388 consolidate what traditionally required discrete amplifiers, muxes, and ADCs into one configurable device. Key features of the UIM shield include eight universal high-voltage analog inputs configurable from eight single-ended to four differential channels, an industry-standard SPI-bus host interface, plug-and-play compatibility with NXP MCU boards featuring Arduino connectors (MCX-N and LPC series), and support for voltage, current, and temperature measurements including RTD and thermocouple sensing. The onboard NAFE13388 provides excitation sources for sensor applications and multiple integrated diagnostic features. Technically, the shield demonstrates a compact hardware design around the NAFE13388 and exposes enhanced software configurability through NXP's universal open-CMSIS driver packs. A public Arduino class library (AFE_NXP_Arduino) and NXP Application Code Hub examples running on the FRDM-MCXN947 accelerate firmware bring-up, with a graphical interface for exploring AFE functions. Typical applications include industrial programmable logic controller (PLC) analog input modules, building automation sensor front-ends, battery-management and process-control measurement nodes, and rapid prototyping of universal analog sensing systems. Design consideration: for proper voltage-level interfacing, the default 3.3 V supply pin on the Arduino connector may need to be removed so the UIM board supports 5 V signaling; some FRDM MCU boards require SPI pin modifications for connection. This page synthesizes distributor availability, evaluation-board context, software ecosystem details, and practical integration notes not consolidated in any single manufacturer document.
NAFE33352-EVB - Universal AIO-AFE Eval Board | NXP | Industrial
The NXP NAFE33352-EVB is an evaluation board for the NAFE33352, a software-configurable universal analog input and output (AIO) analog front-end (AFE) that meets the high-precision measurement and control requirements of industrial-grade applications. The board provides quick access to all NAFE33352 functions, including its 16/24-bit ADC, precision DAC output path, low-drift voltage reference, and readback channels (Vsense, Isense), allowing engineers to characterize analog performance before committing to PCB layout. An analog front-end (AFE) is the circuit stage that conditions real-world signals - voltages, currents, and resistive sensor outputs - before conversion to the digital domain. Within the signal-chain hierarchy (sensor -> AFE -> ADC/DAC -> MCU), the NAFE33352 collapses multiple discrete functions into one IC: a 14/16/18-bit DAC, a 16/24-bit ADC, a low-drift reference, buffers, and high-voltage capable I/O. The NAFEx3352 family features one analog input/output channel and two universal input channels, making it a universal AIO-AFE. The EVB pairs the NAFE33352 device with access points for the HVQFN-40 (6 mm x 6 mm) package signals, and works with the NXP graphical user interface described in user manual UM12180. When combined with an LPC54S018 MCU board loaded with custom firmware (offered separately as KITNAFE33352-EVB), the GUI can read back the part number and OTP register contents, configure channels in software, and stream measurement data. Typical use cases include evaluating RTD and thermistor temperature measurement (using current output plus voltage input to measure resistance), 4-20 mA style current-output loops, process-control analog I/O, and condition monitoring via the LVMUX path that digitizes external and internal signals. A key design consideration: the same EVB hardware is used for both NAFE33352 and NAFE93352 variants, differing only in the assembled device, so verify the populated device when interpreting measurements. This page synthesizes distributor availability, board-level alternatives, and practical evaluation guidance not consolidated in the NXP datasheet or user manual.
NAFE33352-UIOM - Universal AIO AFE Arduino Shield | NXP
The NXP NAFE33352-UIOM is a universal analog input/output (AIO) analog front-end (AFE) Arduino shield evaluation board designed for the NAFE33352, a highly configurable, industrial-grade universal AIO AFE. It also supports the NAFE33350, a highly configurable analog output AFE, and provides a deployment-ready platform for analog input and output applications. An analog front-end (AFE) is the circuit block that conditions real-world analog signals - voltages, currents, RTD and thermistor readings - before conversion to digital data, or generates analog outputs from digital commands. Within the signal-chain hierarchy, an AFE sits between sensors/actuators and the digital controller, encompassing amplifiers, filters, ADCs, DACs, and diagnostics. The NAFE33352-UIOM packages this complete signal chain on an Arduino-compatible expansion board. Key features include software configurability of the analog input/output channels, a readback path that measures voltage and current output (Vsense, Isense), and an LVMUX connection to the ADC for digitizing external and internal signals for condition monitoring. The combination of current output and voltage input enables resistance and temperature measurement using RTDs or thermistors, making the board suitable for industrial-grade measurement and control validation. Technically, the board enables compact hardware design and enhanced software configurability through the universal Open-Cortex Microcontroller Software Interface Standard (CMSIS) driver, allowing engineers to validate analog accuracy and diagnostics before committing to a production design. The underlying NAFE33352 device is a software-configurable universal low-power AIO-AFE family targeting high-precision industrial requirements. Typical applications include industrial sensor acquisition with RTDs and thermistors, 4-20 mA style analog output validation, and analog condition monitoring in factory automation and process control test setups. Design consideration: treat the board as a validation and prototyping platform - verify analog accuracy, diagnostics coverage, and software driver behavior against your end-system requirements before scaling the NAFE33352 into a custom PCB. This page synthesizes manufacturer product information, the NAFE33352 datasheet, the user manual UM12469, and distributor availability into practical evaluation guidance not found on any single source page.
NAFE93352-EVB - High-Speed AIO-AFE Eval Board | NXP Semiconductors
The NXP Semiconductors NAFE93352-EVB is an evaluation board for the NAFE93352, a software-configurable universal analog input and output (AIO) analog front-end (AFE) designed for high-precision, high-speed measurement and control in industrial-grade applications. An analog front-end (AFE) is the circuit stage between real-world sensors and actuators and a digital controller, conditioning, converting, and digitizing analog signals before processing. In the power-management hierarchy of an industrial system, the AFE sits between signal conditioning (amplifiers, filters) and the MCU or PLC backplane, translating raw voltage and current measurements into digital data for control loops. The underlying NAFE93352 is a software-configurable universal I/O AFE whose channels can be programmed as voltage or current inputs and outputs, covering the diverse I/O module requirements of modern process control. NXP positions the NAFE93352 as the high-speed member of the family, while the NAFE33352 serves as the low-power version for battery-backed and density-optimized modules. Both target programmable logic controllers (PLC), process control systems, industrial I/O modules, and data loggers. The NAFE93352-EVB lets engineers exercise these configurable channels, evaluate accuracy against industrial measurement requirements, and prototype analog I/O card designs before committing to custom PCB layouts. Software tooling from NXP supports configuration of channel modes and evaluation of measurement performance. Typical evaluation scenarios include 4-20 mA current-loop input/output emulation for process instrumentation, multi-channel voltage acquisition cards for PLCs, and data-logger front ends that must combine measurement accuracy with flexible channel configuration. When evaluating, budget for stable reference and supply rails on the bench, since AFE accuracy measurements are only as good as the external references and wiring quality used during testing. This page synthesizes distributor availability data, the manufacturer datasheet and product documentation, evaluation guidance, and same-family board alternatives in one place - information not consolidated in any single NXP document.
NB7W-TW00B-V1 - 7" TFT WVGA HMI Touchscreen | Omron | NB-V1 Series
The Omron NB7W-TW00B-V1 is a 7-inch WVGA programmable terminal (HMI) with an 800x480 TFT color touchscreen in the NB-V1 Series, designed as a direct successor to the original NB7W-TW00B. It features dual serial ports, a black bezel, and supports Omron NB-Designer v1.6.7.0 software for screen development. The unit is the standard choice for machine builders pairing HMIs with Omron CP1 family micro-PLC applications. An HMI (Human-Machine Interface) or programmable terminal is an industrial display module that allows operators to visualize process variables, set parameters, and issue commands to a PLC or controller. In the broader automation hierarchy, HMIs sit above PLCs in the control loop and below SCADA in the supervisory layer. The NB-V1 series specifically targets cost-sensitive machine builders who need reliable visualization without the overhead of full-scale SCADA systems, and it integrates natively with Omron's CP1, CJ, CS, and NJ controller families using serial (RS-232C/RS-422A/485) or Ethernet (10 BASE-T/100 BASE-TX) protocols. Key differentiating features of the NB7W-TW00B-V1 include its 65,000-color TFT LCD with LED backlighting, wide viewing angle, USB Type-B programming port, and a long-life 50,000-hour backlight rated for typical industrial duty cycles. Communication is provided through two isolated serial ports plus an Ethernet port, enabling flexible point-to-point or networked deployment. The unit is configured with NB-Designer software, which provides a drag-and-drop component library, alarm handling, and recipe management. Technically, the device runs on an embedded platform optimized for deterministic screen-refresh performance, with internal memory for project storage and data logging. The WVGA resolution (800x480) provides four times the pixel density of older QVGA NB-series displays, enabling sharper graphics, multi-language support, and detailed trend graphs. The unit accepts 24 VDC supply and mounts in a panel cutout compatible with the original NB7W-TW00B, enabling direct field replacement without mechanical rework. Typical applications include factory automation dashboards for small to mid-sized machines, packaging line HMIs, building automation control panels, water/wastewater HMI stations, and OEM equipment where Omron CP1-series PLCs are deployed. When migrating from the discontinued NB7W-TW00B, the NB7W-TW00B-V1 is the recommended replacement per Omron's official V468 replacement guide, preserving project files and wiring. For new designs, the NB-V1 series is the active choice over the legacy NB series, with current firmware support and continued service availability.