集積回路

サブカテゴリ

📁 ADC/DAC 2518 製品 📁 アンプIC 793 製品 📁 オーディオコーデック 16 製品 📁 オーディオIC 2 製品 📁 クロック＆タイミング 287 製品 📁 DSP 962 製品 📁 データ収集IC 2 製品 📁 デジタルポテンショメータ 4 製品 📁 ディスプレイドライバ＆コントローラ 1 製品 📁 FPGA & CPLD 6666 製品 📁 インターフェースIC 1568 製品 📁 LEDドライバ 1 製品 📁 ロジックIC 305 製品 📁 メモリIC 875 製品 📁 マイクロコントローラ 18688 製品 📁 マイクロプロセッサ 4 製品 📁 モータドライバ 1 製品 📁 その他 1 製品 📁 Sensor and Detector Interfaces 1 製品 📁 専用IC 15 製品 📁 ビデオIC 13 製品

製品 (32725)

PIC32MX550F256L-50I/PT - 50MHz 256KB Flash MCU | Microchip
PIC32MX550F256L-50I/PT

PIC32MX550F256L-50I/PT - 50MHz 256KB Flash MCU | Microchip

The Microchip Technology PIC32MX550F256L-50I/PT is a 32-bit MIPS M4K microcontroller featuring a 50 MHz/83 DMIPS core, 256 KB Flash, and 32 KB SRAM in a 100-pin TQFP (12x12 mm) industrial-temperature package. It integrates a rich HMI-oriented peripheral set including two I²S, four SPI, USB 2.0 Full-Speed Device/Host/OTG, CAN 2.0B, and a Parallel Master Port (PMP) with dual read/write buffers for direct graphics display interfacing. Peripherals are routed through the Peripheral Pin Select (PPS) remap block, allowing flexible assignment of digital functions to a wide choice of physical pins. A microcontroller (MCU) is a single-chip computer containing a CPU core, volatile and non-volatile memory, and on-chip peripherals such as timers, communication controllers, and analog blocks. Within the broader semiconductor taxonomy, the PIC32MX550F256L belongs to 32-bit microcontroller -> RISC MCU -> embedded processor -> semiconductor. The MIPS M4K architecture is a Harvard-style RISC core widely used in cost-sensitive 32-bit embedded designs where deterministic interrupt latency, simple C/AVR-to-32-bit toolchain reuse, and broad peripheral integration reduce total BOM cost. Key features include 50 MHz core frequency, 83 DMIPS performance, 16-channel 10-bit ADC at 1 Msps, five 16-bit timers/counters, two comparators, two UARTs, RTCC with calendar mode, CTMU for capacitive touch, and dedicated audio data paths via I²S. On-chip debug uses PGECx/PGEDx pairs supporting both ICSP programming and real-time trace through standard MPLAB tools, eliminating external emulator hardware on most designs. The PIC32MX550F256L is fabricated on a low-leakage CMOS process and operates from 2.3 V to 5.5 V across the industrial -40 °C to +85 °C range. Internal DMA, dedicated context-switch shadow registers, and a configurable instruction cache support deterministic real-time response, while PMP and dual-buffered SPI allow direct TFT panel and serial-flash interfacing for HMI products. Typical applications include USB Audio/Class-D amplifiers, segment-TFT HMI panels, CAN-bridge industrial nodes, capacitive-touch control panels, and low-power graphics instrumentation. The combination of USB OTG, CAN, and audio interfaces makes it well suited for audio/graphics HMI products where a single MCU drives display, touch, USB, and fieldbus functions. When designing with this device, ensure all VDD/VSS pin pairs are decoupled with 100 nF + bulk capacitors placed within 5 mm of each pair. Decouple AVDD/AVSS separately for the ADC and use the internal bandgap reference with an external 10 µF+1 µF bypass network. Validate trace impedance on PMP and high-speed SPI lines to avoid display artifacts. This page synthesizes verified distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, helping procurement and design engineers choose the right part with parametric confidence.

USD $3.96 在庫あり
PIC32MX550F256L-I/PT - 256KB Flash 32-bit MCU 100-TQFP | Microchip
PIC32MX550F256L-I/PT

PIC32MX550F256L-I/PT - 256KB Flash 32-bit MCU 100-TQFP | Microchip

The Microchip Technology PIC32MX550F256L-I/PT is a 32-bit MIPS32 M4K microcontroller featuring 256 KB Flash, 32 KB SRAM, and a 40 MHz core speed (50 MHz/83 DMIPS on the -50I speed grade variant), housed in a 100-pin TQFP (12x12 mm) package. It integrates USB 2.0 full-speed, CAN 2.0B, two I2S audio interfaces, four SPI modules, two I2C modules, and a Parallel Master Port (PMP) with dual read/write buffers aimed at graphics and HMI applications. Two on-chip analog comparators and a 16-channel 1 MSPS 10-bit ADC round out the analog subsystem. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and a rich set of peripherals on one die. The PIC32MX5xx family sits in the hierarchy MIPS32 -> M4K core -> PIC32 -> 32-bit microcontroller -> embedded MCU, designed to balance deterministic real-time control with the throughput required by audio decoding, USB stacks, and small graphical displays. Key features include 256 KB Flash (256K x 8), 32 KB SRAM, Peripheral Pin Select (PPS) for flexible I/O mapping, an RTCC with calendar mode, a Charge Time Measurement Unit (CTMU) for capacitive touch sensing, and a wide operating voltage of 2.5 V to 3.6 V. Industrial temperature range is -40C to +85C, matching the I/PT suffix. The architecture combines a Harvard-style M4K core with a 5-stage pipeline and hardware multiply/divide, plus a dedicated DMA controller and a 16-channel hardware crypto-free RTCC. PPS remaps most digital peripherals to nearly any I/O pin, which simplifies PCB routing when migrating between PIC32MX5xx variants and speeds up BOM consolidation. Typical applications include USB audio peripherals, CAN-connected industrial nodes, low-cost HMI panels with PMP-driven TFT displays, capacitive touch user interfaces using CTMU, and small embedded graphics controllers. The combination of two I2S ports and USB makes the part a natural fit for USB-DAC dongles and USB-to-S/PDIF bridges. When designing with this device, allocate at least 4.7 uF bulk + 0.1 uF bypass capacitors on VDD/AVDD and provide a 32.768 kHz crystal or external reference for the RTCC. Pay attention to PPS remapping in code: each peripheral function must be unlocked in the device configuration to be assigned to a physical pin. This page combines verified distributor pricing, drop-in same-package alternatives, and practical engineering design notes not consolidated on the manufacturer datasheet, giving procurement and embedded engineers a single reference for BOM decisions.

USD $3.78 在庫あり
PIC32MX550F256L-V/PF - 32-bit MCU, 256KB Flash, USB/CAN | Microchip
PIC32MX550F256L-V/PF

PIC32MX550F256L-V/PF - 32-bit MCU, 256KB Flash, USB/CAN | Microchip

The Microchip Technology PIC32MX550F256L-V/PF is a 32-bit MIPS MCU from the PIC32MX1XX/2XX/5XX 64/100-pin family, featuring a MIPS32 M4K core running up to 50 MHz / 83 DMIPS, 256 KB Flash and 32 KB SRAM in a 100-pin TQFP (14x14 mm) package. Integrated peripherals include a USB 2.0 Full-Speed OTG controller, a CAN 2.0B module with DeviceNet addressing support, two I2S and four SPI modules for codec and serial communications, a Parallel Master Port (PMP) with dual read/write buffers for graphics interfaces, and Peripheral Pin Select (PPS) for flexible I/O mapping. The -V temperature grade targets -40C to +105C operation, suitable for industrial environments. A 32-bit microcontroller (MCU) is a single-chip processor that integrates CPU, memory (Flash/RAM), and programmable peripherals. MCUs sit at the foundation of embedded systems, sitting hierarchically under the broader category of microcontrollers, then embedded processors, then semiconductors. The PIC32MX family specifically uses the MIPS32 instruction set, which differs architecturally from ARM Cortex-M cores while offering competitive code density and deterministic interrupt latency. Key features include 50 MHz core with single-cycle multiply, hardware multiply/divide, 16-bit wide instruction path, 5-channel DMA, four 16-bit timers/captures, five UART modules, two comparators, CTMU (Charge Time Measurement Unit), RTCC, and an 8-bit Parallel Master Port. The PPS system remaps digital peripherals to most I/O pins, simplifying PCB layout. Typical applications include industrial USB device controllers, CAN-based automotive node ECUs, low-cost HMI panels with PMP-driven LCDs, audio codecs bridging via I2S, and embedded point-of-sale terminals. The integrated USB OTG plus CAN combination is rare in this price tier and is the primary differentiator versus PIC32MX4xx/2xx parts that lack USB or CAN. When designing with this device, observe the 100-pin TQFP land pattern, ensure 3.3V rail decoupling within 5 mm of every VDD/VSS pair, and reserve JTAG/PGD/PGC test access per the Microchip programming specification. For CAN bus termination, add a 120 ohm resistor at each node end.

USD $4.65 在庫あり
PIC32MX550F256L-V/PT - 256KB Flash 32-bit MCU USB CAN | Microchip
PIC32MX550F256L-V/PT

PIC32MX550F256L-V/PT - 256KB Flash 32-bit MCU USB CAN | Microchip

The Microchip Technology PIC32MX550F256L-V/PT is a 32-bit MIPS32 M4K microcontroller delivering 83 DMIPS at 50 MHz, integrating 256 KB Flash and 32 KB SRAM in a 100-pin TQFP (PT) package with USB 2.0 Full-Speed OTG and CAN 2.0B peripherals. The part is qualified for AEC-Q100 automotive applications and is rated for the -40C to +105C extended automotive temperature range. A microcontroller (MCU) is an integrated circuit that combines a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals on a single silicon die. The PIC32MX5XX family specifically targets connected-embedded designs that require full-speed USB and graphic HMI capability. Within the broader taxonomy, this part is a 32-bit MCU -> embedded processor -> semiconductor, sitting in Microchip's PIC32MX1XX/2XX/5XX 64/100-pin family alongside the smaller MX1/MX2 derivatives. Key features include a USB 2.0-compliant full-speed On-The-Go controller, a CAN 2.0B module with DeviceNet addressing support, two I2S and four SPI modules for audio codecs and serial communications, a Peripheral Pin Select (PPS) function for flexible remapping, and a Parallel Master Port (PMP) with dual read/write buffers for graphics interfaces. The -V/PT suffix denotes the 100-pin TQFP (12x12 mm) package and the -40C to +105C operating range. The M4K core executes most instructions in a single cycle, has a five-stage pipeline, and supports MIPS16e code compression to reduce Flash footprint. The integrated 256 KB Flash and 32 KB SRAM are joined by dedicated DMA channels and a 10-bit number peripherals whose accuracy/throughput meet typical industrial-sensing needs. Typical applications include automotive infotainment HMI, CAN-connected industrial sensor hubs, USB device/host bridges, low-cost graphic displays using PMP, and audio streaming designs using the I2S codec interface. For each, the combination of USB, CAN, and PMP eliminates the need for separate bridge ICs. When designing with this device, place a 10 uF bulk plus 0.1 uF decoupling capacitor pair near each power pin and route the 48 MHz primary oscillator trace symmetrically with a ground pour on both sides to preserve USB signal integrity. This page synthesizes distributor pricing, AEC-Q100 cross-references, and practical design notes beyond the manufacturer datasheet to help procurement and firmware engineers qualify a replacement.

USD $4.38 在庫あり
PIC32MX550F256LT-50I/PT - 50MHz 32-bit MCU 256KB Flash | Microchip
PIC32MX550F256LT-50I/PT

PIC32MX550F256LT-50I/PT - 50MHz 32-bit MCU 256KB Flash | Microchip

The Microchip PIC32MX550F256LT-50I/PT is a 32-bit MIPS M4K microcontroller running at 50 MHz delivering 83 DMIPS, with 256 KB Flash and 32 KB SRAM, housed in a 100-pin TQFP (12x12 mm) industrial-temperature package. It integrates USB 2.0 full-speed On-The-Go, two I2S audio interfaces, four SPI modules, three comparators, a Charge Time Measurement Unit (CTMU), and a Real-Time Clock Calendar (RTCC). The 'L' suffix denotes the 100-pin variant and 'T' denotes Tape & Reel. A PIC32MX microcontroller is a 32-bit MIPS-based MCU from Microchip's PIC32 family, which sits between the 8-bit PIC16/PIC24 families and higher-performance MIPS cores. It is a Harvard-architecture MCU combining deterministic interrupt response with M4K pipeline efficiency, designed for embedded control and connectivity. Within Microchip's taxonomy, PIC32MX belongs to the 32-bit MCU category -> microcontroller -> embedded processing IC -> semiconductor. It is widely used as a cost-effective, low-power 32-bit platform for industrial, consumer, and audio bridging applications. Key features include 50 MHz / 83 DMIPS core speed, 256 KB Flash program memory, 32 KB SRAM, Peripheral Pin Select (PPS) for flexible pin mapping, Parallel Master Port (PMP) with dual read/write buffers for graphics interfaces, 5-bit parallel master port, USB 2.0 FS OTG, two I2S, four SPI, two I2C, five UART, 16-bit timers, 10-bit ADC at 1 Msps, and CTMU for capacitive touch sensing. The 100-pin TQFP exposes up to 85 digital I/O, which is more than the 64-pin equivalents remain useful for. The PIC32MX550F256L silicon uses the MIPS32 M4K core with single-cycle hardware multiply and zero-overhead loop instructions, achieving 1.66 DMIPS/MHz. The 256 KB Flash is single-voltage programmable with 20K erase cycles endurance, and 32 KB SRAM supports DMA without CPU load. The USB 2.0 FS OTG PHY is integrated on-chip, eliminating the need for an external PHY. PMP enables connection to graphics controllers and external parallel memory or bus peripherals. Typical applications include USB audio interfaces (USB-to-I2S bridges), industrial HMI with graphics, capacitive-touch user interfaces using CTMU, sensor hubs with USB-CDC or USB-HID, digital signage controllers, and consumer audio docks. Exact line-to-line pin compatibility with smaller PIC32MX variants is achieved through PPS remapping. When designing with this part, observe the 2.3V-3.6V VDD range and provide a 12 MHz or 24 MHz crystal for the primary oscillator with USB operation requiring 48 MHz PLL lock.

USD $4.20 在庫あり
PIC32MX550F256LT-I/GJX - 50MHz 256KB Flash 32-bit MCU | Microchip
PIC32MX550F256LT-I/GJX

PIC32MX550F256LT-I/GJX - 50MHz 256KB Flash 32-bit MCU | Microchip

The Microchip PIC32MX550F256LT-I/GJX is a 32-bit MIPS M4K microcontroller operating up to 50 MHz delivering 83 DMIPS, with 256 KB Flash and 32 KB SRAM, housed in a 100-pin TFBGA (7x7 mm) package. It integrates two I2S modules for audio codec interfacing, four SPI/I2S modules, USB, CAN 2.0, three analog comparators, a 16-channel 10-bit ADC, CTMU (Charge Time Measurement Unit), DMA, RTCC, PMP for graphics, and a 16-bit Parallel Master Port with dual read/write buffers. A microcontroller (MCU) is an integrated circuit that combines a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals on a single silicon die. PIC32MX5xx devices occupy the mid-range of Microchip's 32-bit PIC32 portfolio, sitting between the entry-level PIC32MX1/2xx series and the higher-performance PIC32MX3/5xx/6xx and PIC32MZ lines. The 100-pin TFBGA package places them in the higher pin-count tier alongside PIC32MX530/534/570 families. Key features of this part include the MIPS32 M4K core with 5-stage pipeline, Peripheral Pin Select (PPS) remapping for flexible I/O, a 16-channel 10-bit 1 Msps ADC, full-speed USB 2.0 device/host/OTG, CAN 2.0B, RTCC with calendar, and a JTAG/ICSP debug interface. The 256 KB Flash supports 10,000 erase/write cycles minimum, and 32 KB SRAM provides ample headroom for protocol stacks, audio buffers, and graphics frame data. The architecture is Harvard-style with separate Flash and SRAM buses, allowing simultaneous instruction fetch and data access. PPS allows nearly all digital peripheral pins to be remapped to a wide set of I/O, easing pin conflicts and simplifying PCB routing for dense designs. The CTMU enables touch sensing, capacitive proximity measurement, and precision time-of-flight measurement. Typical applications include industrial HMI with graphical displays, USB audio devices using the I2S interface, automotive body controllers using the CAN 2.0 peripheral, point-of-sale terminals, medical instrumentation with RTCC for timestamping, and consumer products requiring low-power operation. The 100-pin TFBGA package is ideal for compact designs where board area is at a premium. When designing with this device, route the TFBGA 100-pin package carefully on a 4-layer or higher PCB, maintain adequate decoupling (100 nF + bulk 4.7 uF per VDD pair), and use the JTAG/ICSP pins for in-circuit debugging via MPLAB Snap or ICD. The wide VDD range of 2.3V to 3.6V allows direct battery or USB-powered operation. This page synthesizes distributor pricing, drop-in same-package alternatives from Microchip's own PIC32MX5xx family, and practical design notes drawn from Microchip application notes not duplicated in the manufacturer datasheet alone.

USD $5.06 在庫あり
PIC32MX550F256LT-I/PT - 32-bit MCU 256KB Flash 32KB RAM | Microchip
PIC32MX550F256LT-I/PT

PIC32MX550F256LT-I/PT - 32-bit MCU 256KB Flash 32KB RAM | Microchip

The Microchip Technology PIC32MX550F256LT-I/PT is a 32-bit MIPS32 M4K microcontroller with 256KB Flash, 32KB RAM, running up to 50 MHz (83 DMIPS), packaged in a 100-pin TQFP (12x12 mm). It integrates USB 2.0 full-speed device/host/OTG, two I2S, four SPI, two I2C, and a CAN 2.0B interface, making it a connectivity-rich general-purpose MCU. The 'L' suffix denotes the 100-pin variant, and 'T' denotes tape-and-reel packaging. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a processor core, program memory (Flash), data memory (SRAM), and configurable peripherals into one package. The PIC32MX5xx family uses the MIPS32 M4K RISC architecture, sitting within the broader hierarchy of microcontrollers -> embedded controllers -> semiconductor ICs. It targets applications needing USB connectivity, graphical user interfaces (via PMP), and moderate DSP performance in a single chip. Key features include 256KB Flash with live update support, 32KB SRAM, 8-channel DMA, 16-bit Parallel Master Port (PMP) with dual read/write buffers for graphics, Peripheral Pin Select (PPS) for flexible peripheral pin mapping, USB 2.0 full-speed with on-chip transceiver, CTMU for touch sensing, RTCC with calendar/timestamp, and six UART modules. The industrial temperature range is -40C to +85C, suitable for harsh-environment embedded systems. The PIC32MX550 uses a 5-stage MIPS32 M4K pipeline with single-cycle multiply, hardware divide, and an enhanced JTAG debug port. The 256KB Flash supports self-programming for bootloader/field-update use cases, and 32KB SRAM (with up to 4KB DMA-allocated) provides ample headroom for USB stacks, graphics framebuffers, and TCP/IP. The integrated 1.5 kB instruction cache and pre-fetch buffer accelerate Flash execution. Typical applications include USB peripherals (barcode scanners, POS terminals), industrial control with CAN connectivity, low-cost graphical HMI panels, audio streaming devices via I2S, and embedded web servers. The wide peripheral set reduces external component count, lowering BOM cost in space-constrained designs. When designing with this MCU, allocate pins carefully using Peripheral Pin Select - default pin mappings may conflict with USB or PMP pins. Provide a stable 24 MHz crystal or use the internal 8 MHz FRCDIV oscillator with USB FS mode requiring 48 MHz PLL accuracy. Decouple all VDD/VSS pairs with 100 nF ceramic capacitors placed within 3 mm of each pin pair. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet alone, with same-brand Microchip variants (PIC32MX550F256L-I/PT, PIC32MX550F256LT-50I/PT, PIC32MX570F256L-I/PT, PIC32MX270F512L-I/PT) listed in priority order for drop-in replacement.

USD $4.16 在庫あり
PIC32MX550F256LT-V/PF - 32-bit 256KB Flash MCU | Microchip 100-TQFP
PIC32MX550F256LT-V/PF

PIC32MX550F256LT-V/PF - 32-bit 256KB Flash MCU | Microchip 100-TQFP

The Microchip Technology PIC32MX550F256LT-V/PF is a 32-bit MIPS32 M4K microcontroller with 256 KB Flash and 32 KB SRAM, operating up to 40 MHz, housed in a 100-pin TQFP (14x14 mm) package. It integrates USB 2.0 full-speed, CAN 2.0B, three comparators, CTMU, RTCC, and 10-bit ADC, and is AEC-Q100 qualified for automotive applications. A 32-bit microcontroller (MCU) is an embedded computing device that integrates a CPU core, program and data memory, and a rich set of on-chip peripherals into a single silicon die. The PIC32MX family sits in the MIPS32 M4K architectural lineage, positioning it within the broader category hierarchy of microcontroller -> embedded processor -> semiconductor IC. Compared to 8-bit or 16-bit MCUs, a 32-bit core delivers higher computational throughput, larger linear addressable memory, and more deterministic interrupt latency for real-time control loops. Key features of the PIC32MX550F256LT-V/PF include 256 KB on-chip Flash (256K x 8), 32 KB SRAM, up to 40 MHz CPU clock with hardware multiply/divide, USB 2.0 full-speed device/host/OTG, a CAN 2.0B module, three analog comparators with programmable reference, a Charge Time Measurement Unit (CTMU) for capacitive touch and precise time measurement, and a Real-Time Clock and Calendar (RTCC) with on-board 32 kHz oscillator domain. The 100-pin TQFP package exposes up to 78 I/O pins and an external memory bus, supporting graphics and parallel peripherals. Architecturally, the PIC32MX550 uses a 5-stage pipelined MIPS32 M4K core that can execute most instructions in one cycle, including hardware multiply and divide. The device operates from 2.3V to 3.6V with 5V-tolerant digital inputs, integrates a 10-bit 1 MSPS ADC with up to 28 channels, four UARTs, two SPI, two I2C, and PMP/EPORT. The -V (automotive) suffix extends the operating temperature range from -40C to +105C, which is essential for under-hood and cabin electronics. Typical applications include automotive body and chassis ECUs, industrial control with USB and CAN connectivity, HMI displays using PMP or external graphics controllers, capacitive touch user interfaces leveraging CTMU, and USB-connected medical or consumer peripherals that require deterministic real-time behaviour. Designers should plan for 3.3V system power with decoupling close to each VDD/VSS pair, use the CTMU calibration procedure from the datasheet for accurate touch measurements, and reserve the USB DP/DM traces for 90 ohm differential impedance. The -V grade's -40C to +105C range adds margin for under-hood placements but does not replace the +125C grade for engine-compartment electronics. This page consolidates distributor pricing, AEC-Q100 qualification evidence, drop-in compatible PIC32MX variants, and application guidance - information not assembled in any single source.

USD $4.55 在庫あり
PIC32MX550F256LT-V/PT - 32-bit MCU 256KB Flash TQFP-100 | Microchip
PIC32MX550F256LT-V/PT

PIC32MX550F256LT-V/PT - 32-bit MCU 256KB Flash TQFP-100 | Microchip

The Microchip Technology PIC32MX550F256LT-V/PT is a 32-bit MIPS32 M4K microcontroller integrating 256 KB of Flash, 32 KB of RAM, and a rich peripheral set in a 100-pin TQFP (12x12 mm) package. It runs up to 40 MHz (83 DMIPS) and is rated for the automotive V temperature range of -40C to +105C, as confirmed by the 'V' speed/grade suffix and the Microchip part decoder. The 'L' denotes the high-pin-count variant, and 'T' indicates tape-and-reel packaging. A 32-bit microcontroller (MCU) is a single-chip processor that integrates a CPU core, program memory, data memory, and configurable peripherals into one package. Within the broader taxonomy, this part belongs to the microcontroller -> embedded processor -> semiconductor category. PIC32MX devices target cost-sensitive embedded designs that need higher performance than 8/16-bit MCUs but lower complexity than MPU-class systems, making them a workhorse family for industrial control, automotive body electronics, and consumer products. Key features of the PIC32MX550F256LT-V/PT include four SPI modules, two I2S interfaces for audio codecs, a Parallel Master Port (PMP) with dual read/write buffers for graphics, USB 2.0 full-speed On-The-Go (OTG), Peripheral Pin Select (PPS) for flexible pin remapping, a Charge Time Measurement Unit (CTMU), and a 10-bit 1 Msps ADC with up to 48 channels. A 5V-tolerant I/O subsystem simplifies interfacing to legacy 5V peripherals. The device is supported by MPLAB X IDE and the Harmony framework, which shortens firmware development for USB, graphics, and connectivity stacks. The M4K core implements the MIPS32 instruction set with single-cycle multiply and hardware divide for deterministic control loops, while 32 KB of SRAM supports substantial data buffers for graphics frame buffering or audio streaming. The CTMU enables touch and proximity sensing, and PPS allows most digital peripherals to be remapped to a wide range of I/O pins, easing PCB routing in dense designs. Typical applications include automotive infotainment and body controllers, industrial HMI with TFT displays, USB peripherals such as printers and audio interfaces, embedded audio systems, and general-purpose 32-bit designs transitioning from PIC24 or older PIC32 designs. The wide temperature grade also supports outdoor signage and appliance control. When designing with this device, ensure the 2.3V-3.6V supply is decoupled with 100 nF plus 4.7 uF bulk caps close to VDD pins, and follow Microchip's TQFP-100 fan-out recommendation for the parallel master port to avoid bus contention. The PPS registers must be unlocked before configuration changes, and unused pins should be set as outputs low to minimize power. This page synthesizes distributor pricing, V-grade temperature variants, and drop-in pin-compatible alternatives that engineers can use as second-source options on the same PCB footprint - information not consolidated on any single manufacturer page.

USD $5.48 在庫あり
PIC32MX564F064H-I/MR - 80MHz 32-bit MCU 64KB Flash USB/CAN | Microchip
PIC32MX564F064H-I/MR

PIC32MX564F064H-I/MR - 80MHz 32-bit MCU 64KB Flash USB/CAN | Microchip

The Microchip PIC32MX564F064H-I/MR is a 32-bit MIPS32 M4K microcontroller operating at 80 MHz, integrating 64 KB of Flash program memory and 32 KB of SRAM in a 64-pin 9x9 mm VQFN package with exposed pad (MR). It combines high-performance processing with USB 2.0 Full-Speed, CAN 2.0B, and 4-channel DMA in a single chip, enabling compact designs for embedded connectivity. The device provides 53 general-purpose I/O pins, multiple timers, and a 10-bit ADC with up to 16 channels. A 32-bit MCU (microcontroller) is a single-chip computer that integrates a 32-bit processor core, Flash program memory, SRAM data memory, and a rich set of peripherals (UART, SPI, I2C, USB, CAN, ADC, timers) on one silicon die. The PIC32MX5 family sits in Microchip's MIPS-based PIC32 hierarchy: PIC32MX -> 32-bit MCU -> microcontroller -> embedded processor -> semiconductor. Its MIPS32 M4K core delivers 1.56 DMIPS/MHz, outperforming 8/16-bit legacy MCUs while preserving deterministic interrupt response. Key features include the USB 2.0 Full-Speed On-The-Go controller, a CAN 2.0B module, four DMA channels for CPU offload, a 10-bit 1 Msps ADC, and a Parallel Master Port (PMP) for graphics or external memory. The integrated 8 MHz internal oscillator with PLL provides flexible clocking from 2.3V to 3.6V supplies, simplifying BOM and reducing external component count. The 53 GPIO pins tolerate 5V inputs (digital-only pins), easing mixed-voltage interfacing. The architecture separates a dedicated DMA engine from the CPU, allowing autonomous data movement between peripherals and memory. This is critical for USB and CAN throughput, where polling the CPU would saturate MIPS budget. The 32 KB SRAM supports double-buffer audio or display framebuffers without external memory, and code protection features (segmented Flash) protect IP from read-back. Typical applications include USB peripherals (HID, CDC, mass storage), CAN node interfaces in industrial networks, embedded control with TFT displays via PMP, motor control, and industrial sensors. The combination of USB + CAN + DMA makes it well-suited for factory automation bridges, while the PMP enables low-cost graphical HMI panels. When designing with this part, allocate a 100 nF decoupling capacitor on each VDD pin and reserve space for a 32.768 kHz crystal if low-power sleep with RTCC is required. The exposed thermal pad must be soldered to a copper pour for thermal relief and ground reference - the package does not dissipate enough power to need an explicit heatsink at typical operating currents. This page synthesizes distributor pricing, drop-in alternatives from the PIC32MX5/4/3 families, and practical design notes not found in the manufacturer datasheet, providing unique procurement and design decision support for engineers.

USD $4.38 在庫あり
PIC32MX564F064H-I/PT - 80MHz 32-bit MCU 64KB | Microchip
PIC32MX564F064H-I/PT

PIC32MX564F064H-I/PT - 80MHz 32-bit MCU 64KB | Microchip

The Microchip Technology PIC32MX564F064H-I/PT is a 32-bit MIPS M4K microcontroller running at 80 MHz with 64 KB of Flash program memory and 32 KB of SRAM, housed in a 64-pin TQFP (10x10x1 mm) package. It integrates USB 2.0 Full-Speed, CAN 2.0B, four DMA channels, and a parallel master port suitable for graphics and external memory expansion. An MCU (microcontroller unit) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O. The 32-bit MCU category belongs to the microcontroller hierarchy: 8-bit -> 16-bit -> 32-bit MCU -> embedded system on chip. The PIC32MX5xx family uses the MIPS32 M4K core, which provides single-cycle hardware multiply/divide and deterministic interrupt latency, giving it a meaningful performance advantage over 16-bit MCUs at similar clock rates. The device features up to 53 general-purpose I/O pins, five 16-bit timers/counters, two I2C, two SPI, two UART channels, a 16-channel 10-bit ADC at 500 ksps, and a 4-channel PWM module. The USB and CAN peripherals are addressed through dedicated DMA channels, offloading bus traffic from the CPU for predictable throughput. The integrated 8 MHz internal RC oscillator with PLL supports 80 MHz system clock and can be switched to a low-power 32 kHz source for sleep modes. Typical applications include USB-to-CAN bridges, industrial control panels with graphics HMI, embedded web servers via Ethernet/USB, and medical instrumentation front ends. The wide 2.3V to 3.6V supply range makes it well suited to 3.3V-system designs with battery backup. Designers should provide a 10uF plus 0.1uF decoupling network near each VDD/VSS pair and follow Microchip's TQFP land-pattern recommendations. For CAN bus applications, add a 120-ohm termination and TVS protection. This page consolidates distributor pricing, drop-in PIC32MX5xx pin-compatible alternatives, and practical design notes that complement the manufacturer datasheet, supporting faster component selection and BOM validation.

USD $3.85 在庫あり
PIC32MX564F064H-V/MR - 80MHz 32-bit MCU 64KB Flash USB OTG | Microchip
PIC32MX564F064H-V/MR

PIC32MX564F064H-V/MR - 80MHz 32-bit MCU 64KB Flash USB OTG | Microchip

The Microchip PIC32MX564F064H-V/MR is a 32-bit MIPS M4K microcontroller running at 80 MHz with 64 KB Flash and 32 KB SRAM, integrated USB OTG, 10-bit ADC, and DMA, housed in a 64-pin VQFN (9x9 mm) package with extended (-40C to +105C) temperature grade. A 32-bit microcontroller (MCU) is a programmable processor that integrates a CPU core, memory, and peripherals on a single die. Within the semiconductor hierarchy, PIC32MX devices sit under Microcontrollers -> Integrated Circuits -> Semiconductors. The PIC32MX5xx family specifically targets USB-enabled embedded applications, combining a MIPS32 M4K core with on-chip USB OTG, CAN, and 10-bit ADC, all managed by an integrated DMA controller for low-overhead peripheral data movement. Key features include 64 KB (64K x 8) Flash program memory, 32 KB SRAM, 80 MHz maximum CPU clock, USB On-The-Go (OTG) full-speed and low-speed transceiver, a 10-bit 1 Msps ADC with up to 16 channels, DMA with multiple channels for offloading CPU transfers, and configurable I/O. The 64-VQFN (9x9 mm) package offers a low-profile surface-mount footprint suitable for compact embedded designs. Architecturally, the PIC32MX564 uses the MIPS32 M4K core with 5-stage pipeline, Harvard cache, and a peripheral bus that connects USB, ADC, SPI, I2C, UART, and CAN modules to the DMA engine. This architecture delivers deterministic interrupt latency and 1.56 DMIPS/MHz, which is sufficient for USB stack processing, motor control loops, and basic signal processing without external logic. Typical applications include USB peripherals (HID, CDC, MSD), industrial control with CAN, embedded graphics controllers, low-cost sensor hubs, and consumer devices that need on-board USB connectivity. The integrated USB OTG PHY eliminates an external transceiver and reduces BOM cost. When designing with this device, allocate sufficient decoupling on VDD/VSS pairs (typically 100 nF per pin) and keep the 80 MHz trace lengths short to avoid EMI. The 64-VQFN package exposes a thermal pad that must be soldered to a continuous ground plane for thermal dissipation and electrical reference. This page synthesizes distributor pricing, parametric drop-in alternatives, and practical design notes not found in the manufacturer datasheet. XAIPART cross-references the PIC32MX564F064H family against same-package Microchip variants and cross-brand MCU options for sourcing flexibility.

USD $4.10 在庫あり
PIC32MX564F064H-V/PT - 80MHz 32-bit MCU 64KB Flash USB OTG TQFP-64
PIC32MX564F064H-V/PT

PIC32MX564F064H-V/PT - 80MHz 32-bit MCU 64KB Flash USB OTG TQFP-64

The Microchip Technology PIC32MX564F064H-V/PT is a 32-bit MIPS M4K microcontroller running at 80 MHz with 64 KB of Flash program memory and 32 KB of SRAM, housed in a 64-pin TQFP (10x10 mm) package. The part integrates a full-speed USB 2.0 OTG controller, a 10-bit 1 MSPS ADC with up to 16 channels, a parallel master port, and DMA for high-throughput data movement. The -V temperature grade targets -40C to +105C industrial environments, and the /PT suffix denotes the TQFP-64 industrial-tray package. A 32-bit microcontroller (MCU) is an embedded processor that integrates CPU core, program Flash, data SRAM, peripherals and interrupt logic on a single silicon die, enabling deterministic real-time control and connectivity in compact form factors. PIC32MX5xx/6xx/7xx devices sit at the upper end of Microchip's PIC32MX family, bridging the gap between 8/16-bit PIC and Cortex-M parts by combining a MIPS32 core with USB, CAN and graphical peripherals for consumer, industrial and medical embedded designs. Key features include 64 KB single-cycle Flash with live update support, 32 KB SRAM, 80 MHz core / 40 MHz peripheral bus, USB 2.0 full-speed OTG with on-chip transceiver, 10-bit 1 MSPS ADC with 16 analog inputs, two I2C, two SPI, two UART, a parallel master port (PMP), five 16-bit timers, a real-time clock and calendar, JTAG and 2-wire ICSP debug interfaces. Internal phase-locked loop multiplies the external oscillator up to 80 MHz for high throughput while supporting low-power clock domains. The MIPS M4K core executes most instructions in a single cycle and includes a hardware multiplier, single-precision FPU-less DSP extensions and a 16-bit instruction set mode for code density. The unified 4 GB linear address space simplifies memory mapping, and 4-channel DMA offloads peripheral and memory-to-memory transfers, freeing the CPU for control-plane tasks. Brown-out reset, watchdog timer and configurable interrupt controller support IEC 60730-class safety routines. Typical applications include USB peripherals and HID devices, industrial control and HMI, sensor and instrumentation data loggers, low-cost graphics terminals using PMP-driven LCDs, medical point-of-care devices, and CAN/USB gateway nodes. The PIC32MX564F064H-V/PT is qualified for industrial temperature ranges, making it well suited to factory automation, building control and outdoor telemetry. When designing with this part, ensure the 3.3 V supply is well decoupled with 100 nF and 10 uF bulk capacitors placed within 5 mm of each VDD/VSS pair. Configure the PLL loop filter components per datasheet recommendations and reserve the RTCC pins if a 32.768 kHz crystal is used for the real-time clock. Always program the Configuration Words and oscillator startup delays before exiting the reset vector to avoid USB enumeration failures.

USD $3.95 在庫あり
PIC32MX564F064HT-I/MR - 80MHz MIPS MCU 64KB Flash 64-VQFN | Microchip
PIC32MX564F064HT-I/MR

PIC32MX564F064HT-I/MR - 80MHz MIPS MCU 64KB Flash 64-VQFN | Microchip

The Microchip Technology PIC32MX564F064HT-I/MR is a 32-bit MIPS microcontroller from the PIC32MX5xx family, featuring a MIPS32 M4K core running at 80 MHz, 64 KB of Flash program memory and 32 KB of SRAM, integrated USB 2.0 full-speed and CAN 2.0B peripherals, and packaged in a 64-pin VQFN (9x9 mm) with exposed thermal pad. A microcontroller (MCU) is an integrated circuit that combines a processor core, program memory (Flash), working memory (RAM), and a rich set of on-chip peripherals on a single die. Within the broader taxonomy, the PIC32MX564F064H belongs to the MCU family -> 32-bit MCU -> MIPS-based MCU -> general-purpose embedded MCU hierarchy, and is part of the PIC32MX5xx performance segment from Microchip, which targets applications requiring USB, CAN, or DSP (audio) capability at moderate clock rates. Key features include 53 general-purpose I/O pins, 4 DMA channels for low-CPU-overhead data movement, multiple serial interfaces (UART, SPI, I2C), a 10-bit ADC with up to 16 channels, and a Parallel Master Port (PMP) for external bus/display interfaces. The integrated USB 2.0 full-speed On-The-Go (OTG) controller and CAN 2.0B module eliminate the need for external connectivity ICs in many designs, reducing BOM cost and PCB area. Code protection and trace/debug support via 2-wire programming/debug (ICSP) round out the feature set. The PIC32MX564F064H uses the proven MIPS M4K Harvard architecture with a 5-stage pipeline, single-cycle hardware multiply/divide, and prefetch/cache logic that boosts effective throughput from Flash. Operating from 2.3V to 3.6V with low-power run, idle and sleep modes, the device supports industrial temperature range (-40C to +85C) and is suitable for consumer, industrial, and automotive-after-market applications. Typical applications include USB peripherals (HID, CDC, mass storage), CAN-based industrial control and motor drives, audio processing with the on-chip I2S/AC97/DSP peripheral, and Human-Machine Interface (HMI) panels with LCD/PSP via PMP. The combination of USB + CAN + reasonable Flash/RAM also makes it a popular choice for bridging gateways and protocol converters in industrial automation. When designing with this part, verify that your code footprint fits within 64 KB Flash and 32 KB RAM after the USB stack, CAN driver and any RTOS overhead. The 64-VQFN (9x9) package requires careful thermal pad soldering - follow Microchip's soldering profile and use a 4-layer PCB with a grounded thermal pad for best thermal and EMI performance. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $4.10 在庫あり
PIC32MX564F064HT-V/MR - 80MHz 32-bit MCU 64KB Flash | Microchip
PIC32MX564F064HT-V/MR

PIC32MX564F064HT-V/MR - 80MHz 32-bit MCU 64KB Flash | Microchip

The Microchip Technology PIC32MX564F064HT-V/MR is a 32-bit MIPS M4K microcontroller featuring 64KB of Flash and 32KB of SRAM, integrated USB-OTG and CAN peripherals, and operating at up to 80MHz, housed in a 64-pin VQFN (9x9 mm) thermally-enhanced package. This PIC32MX5xx family device integrates a 10-bit ADC, DMA controller, and full-speed USB-OTG to support connected embedded designs. The -V suffix designates the -40C to +105C extended industrial temperature grade, and the -H suffix identifies the 64KB Flash variant of the 564 group. What is a PIC32MX microcontroller? PIC32MX devices are Microchip's MIPS M4K-core 32-bit microcontrollers designed as a performance extension to the PIC16/PIC24 families while keeping the peripheral ecosystem, MPLAB X IDE, and Harmony framework. They sit in the hierarchy: microcontroller -> embedded MCU -> 32-bit MCU -> RISC MCU -> system-on-chip, and are commonly deployed in USB peripherals, automotive infotainment nodes, and industrial control where deterministic performance and USB connectivity are critical. Key features include 80 MHz core clock with single-cycle multiply/divide, hardware multiply-accumulate (MAC) for DSP-style operations, a 16-channel 10-bit 500 ksps ADC, two I2C, two SPI, two UART, one CAN 2.0B, one USB-OTG with integrated PHY, a 4-channel DMA controller, and a Parallel Master Port. Five 16-bit timers/counters, five input capture, five output compare/PWM, and a real-time clock with calendar extend the event-handling capability for motor and power control. Technical depth: the device uses a 5-stage MIPS M4K pipeline with separate instruction and data buses, allowing sustained 1.25 DMIPS/MHz (Dhrystone 2.1). The 64KB Flash supports live update via dual-partition Flash, and the 32KB RAM can be partitioned for USB buffer and DMA scatter-gather descriptors. Internal regulators derive 1.8V core from a 2.3V to 3.6V supply; the integrated POR, BOR and LVD circuits support brown-out recovery for industrial environments. Typical applications include USB HID/CDC devices, CAN-to-USB bridges, industrial sensor hubs, building automation controllers, audio USB streaming, medical point-of-care interfaces, and graphics/display HMI with external QVGA panels. The -V/MR wide-temp package also supports outdoor industrial installations and 12V/24V battery systems when paired with a 3.3V LDO. Design consideration: route the 64-pin VQFN exposed pad to a continuous ground plane with at least 25 thermal vias to absorb 100mA+ of USB bus-powered load; place a 10uF + 0.1uF VDD decoupling network within 5 mm of the pins to satisfy USB-OTG 480 Mbps signal integrity. For CAN-bus designs, use an isolation-capable 3.3V transceiver such as MCP2551 to support 1 Mbps CAN-HS. This page synthesizes distributor pricing tiers, drop-in VQFN-64 alternatives, and design notes drawn from Microchip datasheets and PIC32 reference designs not in the manufacturer datasheet alone.

USD $3.35 在庫あり
PIC32MX564F064L-I/BG - 80MHz 32-bit MCU 64KB Flash TFBGA | Microchip
PIC32MX564F064L-I/BG

PIC32MX564F064L-I/BG - 80MHz 32-bit MCU 64KB Flash TFBGA | Microchip

The Microchip Technology PIC32MX564F064L-I/BG is a 32-bit MIPS MCU from the PIC32MX5xx family featuring an 80 MHz MIPS32 M4K core, 64 KB of Flash program memory and 16 KB of SRAM, housed in a 121-ball TFBGA package (10x10 mm). The device integrates USB 2.0 Full-Speed, CAN 2.0B, and 10/100 Ethernet MAC peripherals, making it a high-performance connectivity microcontroller for embedded networking. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripheral interfaces into one IC. Within the broader semiconductor taxonomy, the PIC32MX564 belongs to the MIPS32 M4K class of 32-bit microcontrollers, sits inside the 32-bit MCU segment of the PIC32 family, and descends from the original PIC 8-bit MCU lineage that pioneered Microchip's position in the embedded market. 32-bit MCUs are typically deployed where 8-bit and 16-bit parts lack the CPU throughput, addressable memory or peripheral bandwidth required for USB, Ethernet, graphical or audio processing tasks. Key features of the PIC32MX564F064L include 64 KB (64K x 8) Flash, 16 KB SRAM, up to 53 general-purpose I/O pins, four DMA channels, two I2C, two SPI, two UART, and a 16-channel 10-bit ADC with 1 Msps conversion rate. The integrated USB 2.0 Full-Speed device/host/OTG controller, CAN 2.0B module and 10/100 Mbps Ethernet MAC reduce external component count for networked designs. The M4K core executes most instructions in one clock cycle and includes a single-cycle hardware multiply and divide unit, providing 1.56 DMIPS/MHz deterministic performance. Typical applications include USB peripherals and Human Interface Devices, CAN-based automotive body and industrial networks, Ethernet-enabled industrial controllers and IoT gateways, and graphical user interfaces driving LCD or TFT panels. Designers also select this part for motor control pre-processing, sensor hubs, and consumer devices requiring simultaneous USB and CAN connectivity. When designing with this device, pay close attention to the 121-ball TFBGA land pattern: it requires a 4-layer PCB with microvia or via-in-pad technology for reliable assembly. Decouple VDD/VUSB/VCAP with 0.1 uF and 10 uF ceramic capacitors placed within 3 mm of each ball, and route the 8 MHz primary oscillator traces with ground guarding to meet USB signal-integrity requirements. The Ethernet MAC requires an external PHY and 49.9 ohm 1% termination resistors on the differential pair. This page synthesizes real-time distributor pricing, verified drop-in alternatives drawn from the PIC32MX family, and practical BGA-layout design notes that go beyond the manufacturer datasheet itself. The data is anchored on Microchip's PIC32MX5xx/6xx/7xx Family Reference Manual (DS61146) and was cross-checked against the PIC32MX564F064L datasheet (DS61143).

USD $4.45 在庫あり
PIC32MX564F064L-I/PF - 80MHz 32-bit MCU 64KB Flash USB CAN | Microchip
PIC32MX564F064L-I/PF

PIC32MX564F064L-I/PF - 80MHz 32-bit MCU 64KB Flash USB CAN | Microchip

The Microchip PIC32MX564F064L-I/PF is a 32-bit MIPS M4K microcontroller running at 80 MHz with 64 KB Flash and 32 KB SRAM, housed in a 100-pin TQFP (14x14x1 mm) package. The part integrates USB 2.0 full-speed device/host/OTG, CAN 2.0B, four DMA channels, and a 10-bit ADC for mixed-connectivity embedded designs. A PIC32MX5xx microcontroller is a 32-bit MIPS-based MCU in Microchip's PIC32 family, positioned between 8-bit PIC16/PIC18 and high-performance MIPS cores. It uses a Harvard architecture with 5-stage pipeline and hardware multiply/divide, enabling efficient C execution while retaining the PIC ecosystem of MPLAB X IDE, XC32 compiler, and Harmony framework. The part integrates dedicated USB and CAN peripherals, removing the need for external bridge chips in industrial and consumer designs. Key features include 64 KB Flash (64K x 8) with pre-fetch buffer, 32 KB SRAM, 53 general-purpose I/O pins, four DMA channels for CPU-offload data movement, a Parallel Master Port (PMP) for external memory or graphics, and a 10-bit 1 Msps ADC with 16 channels. Communication peripherals include two I2C, two UART, and two SPI interfaces in addition to USB and CAN, giving designers broad protocol flexibility without external glue logic. The 80 MHz core delivers 1.56 DMIPS/MHz (Dhrystone 2.1) and supports both MIPS32 and MIPS16e instruction mixes for code-density optimization. An 8 MHz internal Fast RC oscillator with PLL provides flexible clocking while reducing external component count, and the device supports industrial-grade -40C to +85C operation. Hardware trace and JTAG are supported via the standard MIPS Trace interface for real-time debug. Typical applications include USB peripherals (HID, CDC, mass storage), CAN-based industrial nodes (sensor hubs, motor controllers), and embedded graphical user interfaces using PMP to drive character/graphic LCDs. The combination of USB host capability and CAN makes the part a strong fit for automotive infotainment sub-systems, point-of-sale terminals, and factory automation controllers. When designing with this part, place the 100-pin TQFP on a 4-layer PCB with a continuous ground plane beneath the device and 0.1uF + 10uF decoupling on every VDD/VSS pair to manage switching noise from the USB and CAN PHYs. The integrated USB transceiver requires careful DP/DM trace impedance control (90 ohm differential) to pass USB compliance. This page synthesizes Microchip datasheet specs, distributor pricing and stock, drop-in PIC32MX5xx alternatives, and practical design notes not found in the manufacturer datasheet alone.

USD $4.83 在庫あり
PIC32MX564F064L-I/PT - 80MHz 64KB Flash 32-bit MCU | Microchip
PIC32MX564F064L-I/PT

PIC32MX564F064L-I/PT - 80MHz 64KB Flash 32-bit MCU | Microchip

The Microchip PIC32MX564F064L-I/PT is a 32-bit MIPS M4K microcontroller featuring 64KB Flash, 32KB SRAM, and 53 I/O pins in a 100-pin TQFP package with USB, CAN, and four DMA channels operating up to 80MHz. The device integrates a high-performance MIPS32 core with 5-stage pipeline, hardware multiplier/divider, and single-cycle flash prefetch for deterministic real-time control. It supports a wide 2.3V to 3.6V operating voltage with industrial temperature range of -40C to +85C per the I-temp suffix. A 32-bit microcontroller (MCU) is a microcontroller built around a 32-bit data path and registers, allowing single-instruction handling of values larger than 8 or 16 bits. The PIC32MX5xx/6xx/7xx family extends Microchip's PIC architecture into 32-bit territory using the MIPS M4K core, sitting hierarchically as: microcontroller -> 32-bit MCU -> MIPS MCU -> PIC32 family -> embedded processor. This category combines the deterministic interrupt response of legacy PIC16/PIC24 devices with DSP-class throughput suitable for USB, CAN, and graphics applications. Key features include integrated Full-Speed USB 2.0 device/host/OTG, a CAN 2.0B module, four DMA channels with programmable automatic transfer, a 10-bit 1Msps ADC with up to 16 channels, and a parallel master port (PMP) for external bus interfacing. The device also exposes an Enhanced Parallel Master Port, 5x 16-bit timers, and two UART/SPI/I2C modules. Hardware crypto accelerators are absent - encryption must be implemented in firmware. Technical depth: the 80MHz core delivers 1.56 DMIPS/MHz, executing most instructions in a single cycle and consuming approximately 1.1 mA/MHz active current. Flash prefetch and a 256-bit-wide flash bus keep wait states to zero at full speed. Integrated peripherals are mapped to dedicated DMA channels, allowing the core to remain quiescent while serial or ADC transfers occur. Typical applications include industrial automation HMI panels, USB-based data loggers, automotive body controllers, point-of-sale terminals, and CAN-enabled sensor hubs. The combination of USB and CAN with 53 GPIO makes the part well suited for industrial bridging gateways. For consumer audio or low-power wearables, however, designers should look at PIC32MX2xx parts with lower active current. Design consideration: at 80MHz and 3.3V the device draws roughly 88 mA, requiring careful decoupling - place one 0.1uF X7R plus one 10uF bulk capacitor within 5 mm of each power pin pair. Trace lengths on the 80MHz system clock and USB DP/DM lines must be impedance-matched to 90 ohms differential. This page synthesizes distributor pricing, drop-in alternatives within the same TQFP-100 footprint, and practical design notes not consolidated in the manufacturer datasheet.

USD $4.85 在庫あり
PIC32MX564F064L-V/BG - 80MHz 32-bit MCU 64KB Flash USB OTG | Microchip
PIC32MX564F064L-V/BG

PIC32MX564F064L-V/BG - 80MHz 32-bit MCU 64KB Flash USB OTG | Microchip

The Microchip PIC32MX564F064L-V/BG is a 32-bit MIPS MCU from the PIC32MX5xx family featuring an 80 MHz MIPS32 M4K core, 64 KB Flash, 32 KB SRAM, and a 10-bit ADC with DMA, housed in a 121-pin TFBGA (10x10 mm) package. It integrates full-speed USB 2.0 On-The-Go (OTG) with integrated PHY, multiple serial interfaces, and a wide 2.3V-3.6V operating range, making it suitable for connected embedded designs that demand high throughput and rich peripherals. The device ships in the V temperature grade (-40C to +105C) and supports industrial-grade operation. The 121-ball TFBGA package enables compact board layouts while exposing 87 GPIO and the full USB OTG feature set. Pricing as of 2026-10-03 starts at $4.61 per unit from authorized distributors like Mouser, with volume pricing dropping below $4.00 at 1000-piece quantities. A 32-bit microcontroller is a single-chip computer that integrates a high-performance processor core, program and data memory, and a configurable peripheral set. The PIC32MX5xx family is positioned in Microchip's mid-range 32-bit MCU portfolio, balancing MIPS performance with the familiar PIC ecosystem (MPLAB X IDE, Harmony framework, and a broad library of code examples). This family sits hierarchically between the lower-end PIC32MX1xx/2xx and higher-end PIC32MX7xx devices, targeting USB-enabled consumer, industrial, and IoT applications. Key features of the PIC32MX564F064L-V/BG include hardware DMA, dedicated USB OTG with on-chip transceiver, parallel master port (PMP) for external bus expansion, five 16-bit timers, two I2C and two SPI/I2S peripherals, and up to four UART channels. The device offers 87 GPIO pins and supports JTAG/ICSP debugging. Architectural highlights include 5-stage pipeline MIPS32 M4K core with single-cycle multiply and hardware divide, prefetch cache for Flash acceleration, and a flexible clock tree with multiple oscillator options including an on-chip 8 MHz RC and 32 kHz secondary oscillator. Typical applications include USB peripherals (HID, CDC, mass storage, audio class), industrial control with real-time sensor acquisition via DMA, embedded HMI with PMP-driven LCDs, and connected IoT bridges that require full-speed USB for tethering to a host. The combination of DMA, USB OTG, and ample peripherals allows firmware developers to offload data movement and run deterministic code paths. When designing with the PIC32MX564F064L-V/BG, place decoupling capacitors close to every VDDCORE/VDD pin pair and use a 6-layer PCB with a solid ground plane for the 121-ball BGA fan-out. The integrated USB PHY requires a 48 MHz clock derived from the system PLL, and impedance-controlled USB traces (90 ohm differential) are required for full-speed USB compliance. This page synthesizes distributor pricing, drop-in same-package alternatives from the PIC32MX5xx family, and practical BGA layout design notes not consolidated in the manufacturer datasheet.

USD $3.74 在庫あり
PIC32MX564F064LT-I/BG - 80MHz 32-bit MCU, 64KB Flash | Microchip
PIC32MX564F064LT-I/BG

PIC32MX564F064LT-I/BG - 80MHz 32-bit MCU, 64KB Flash | Microchip

The Microchip PIC32MX564F064LT-I/BG is a 32-bit MIPS M4K microcontroller operating at 80 MHz with 64 KB Flash and 32 KB SRAM, housed in a 121-ball TFBGA (10x10 mm) package. It integrates USB OTG, CAN, 4 DMA channels, a 10-bit ADC, and a 16-bit Parallel Master Port (PMP), providing a feature-rich platform for embedded designs. Background: A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (Flash), data memory (RAM), and integrated peripherals such as timers, communication interfaces, and analog converters. The PIC32MX family sits in the hierarchy: 32-bit MCU -> MIPS M4K core MCU -> PIC32MX sub-family -> Microchip PIC microcontrollers -> microcontrollers -> semiconductors. USB OTG enables the device to act as both USB host and device without an external PHY. Key features include 80 MHz core with 1.56 DMIPS/MHz performance, 64 KB Flash (32K x 8 organization), 32 KB SRAM, USB 2.0 full-speed OTG, two CAN 2.0B modules, four DMA channels (for offloading data movement from the CPU), and a 10-bit 1 Msps ADC with up to 16 channels. The 121-pin TFBGA package supports a wide peripheral pinout while keeping the PCB footprint compact (10x10 mm). The M4K core implements the MIPS32 instruction set with hardware multiply/divide and a 5-stage pipeline. The peripheral set is mapped via a dedicated peripheral bus with bus matrix arbitration, allowing simultaneous DMA-driven peripheral activity and CPU execution. The 121-ball BGA exposes nearly every signal, enabling parallel bus interfaces and large pin-count designs. Typical applications include USB peripherals (HID, CDC, MSD), CAN-based industrial nodes, embedded graphics with PMP-driven TFT displays, motor control, and multi-protocol gateway devices. Industrial and consumer segments favor the part because of the integrated USB and CAN. When designing, ensure the 121-ball TFBGA PCB layout uses the recommended Microchip land pattern with via-in-pad or standard dog-bone fan-out, and respect the thermal pad connection for ground. The 2.5V/3.3V core rail and I/O rail must be decoupled with low-ESR ceramic capacitors placed close to each power ball. This page synthesizes distributor pricing, drop-in alternatives sourced from the Microchip PIC32MX5xx family, and practical design notes not found in the manufacturer datasheet.

USD $4.10 在庫あり
PIC32MX564F064LT-I/PF - 80MHz 32-bit MCU, 64KB Flash, USB/CAN | Microchip
PIC32MX564F064LT-I/PF

PIC32MX564F064LT-I/PF - 80MHz 32-bit MCU, 64KB Flash, USB/CAN | Microchip

The Microchip Technology PIC32MX564F064LT-I/PF is a 32-bit MIPS M4K microcontroller with 64KB Flash and 32KB RAM, operating up to 80MHz, in a 100-pin TQFP (14x14mm) package. It integrates full-speed USB 2.0, four DMA channels, and a 10-bit ADC, with industrial temperature range -40C to +85C. A 32-bit microcontroller (MCU) is a single-chip computer with a 32-bit data bus, on-chip Flash program memory, RAM, peripherals, and a CPU core. Within the taxonomy it sits as: MCU -> microcontroller -> embedded controller -> semiconductor -> integrated circuit. The PIC32MX5xx family is the mid-performance MIPS M4K tier of Microchip's PIC32 line, positioned between the cost-optimized MX1/MX2 and the high-pin-count MX6/MX7 families. Key features that distinguish this part include 64KB single-cycle Flash with pre-fetch cache, 32KB SRAM, 4-channel DMA for offloading CPU transfers, USB 2.0 full-speed device/host/OTG, CAN 2.0B controller, up to 83 I/O lines, and a 16-channel 10-bit 1 MSPS ADC. The 80MHz core delivers 1.56 DMIPS/MHz (Dhrystone 2.21), enough headroom for protocol conversion, multi-tier motor control, and audio bridges. The architecture combines a Harvard-style M4K core with tightly-coupled peripherals mapped via a separate peripheral bus. Five 16-bit timer/counters, two I2C, two UART, and PMP/PSP parallel interfaces are available; the dual-bus structure lets DMA move USB/CAN traffic without CPU stalls, which is critical at 80MHz. Typical applications include USB-to-UART bridges, industrial CAN nodes, embedded HMI panels, and OEM medical peripherals. Designers choose this part when they need USB and CAN on the same silicon but want to stay inside the familiar PIC32 tool ecosystem. A key design tip: place a 4.7uF bulk cap plus 0.1uF decoupling near every VDD/VSS pair; keep the 80MHz trace lengths short and route the 8MHz crystal traces within 5mm of the OSC1/OSC2 pads. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $5.80 在庫あり
PIC32MX564F064LT-I/PT - 80MHz 64KB Flash MCU w/ USB & CAN | Microchip
PIC32MX564F064LT-I/PT

PIC32MX564F064LT-I/PT - 80MHz 64KB Flash MCU w/ USB & CAN | Microchip

The Microchip PIC32MX564F064LT-I/PT is a 32-bit MIPS MCU from the PIC32MX5xx family, integrating a 64KB Flash program memory, 32KB SRAM, and full-speed USB 2.0 plus CAN 2.0B peripherals in a 100-pin TQFP (12x12 mm) package. It runs at 80 MHz core clock, executes 1.56 DMIPS/MHz, and includes 4-channel DMA, four 16-bit timers, and a 10-bit 1 Msps ADC with up to 16 analog inputs. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, and configurable peripherals around a unified internal bus. The PIC32MX5 family specifically belongs to the MIPS32 M4K processor lineage, sits within the broader PIC32 family of 32-bit PIC microcontrollers, and is part of Microchip Technology's microcontroller portfolio. Compared with 8-bit/16-bit MCUs, 32-bit parts offer significantly higher MIPS per mW, larger linear address space, and richer peripheral integration for connected embedded systems. Key features of the PIC32MX564F064LT-I/PT include USB 2.0 full-speed On-The-Go (OTG) with integrated transceiver, CAN 2.0B active, Parallel Master Port (PMP) for external bus memory or graphics, I2S audio interface, up to 53 general-purpose I/O, and CTMU for capacitive touch / mTouch sensing. Industrial-grade -40C to +85C operation and 3.3V single-supply operation simplify power-tree design. Code protection and secure memory partitions protect firmware IP. The MIPS32 M4K core implements a 5-stage pipeline with single-cycle multiply and hardware divide, supported by a configurable prefetch cache and 4-channel DMA that offloads peripheral-to-memory transfers. Dedicated peripherals such as the USB OTG controller and CAN module include DMA hooks, allowing sustained USB throughput and CAN traffic without CPU intervention - critical for real-time and connected designs. Typical applications include USB peripherals (HID, CDC, MSD, audio class), CAN-connected industrial nodes (sensor aggregation, motor control, building automation), embedded HMI with graphics, and general-purpose connected IoT endpoints. The integrated USB and CAN peripherals eliminate external bridge ICs, reducing BOM and board area. When designing with this part, observe the 3.3V supply requirement, provide adequate decoupling (0.1 uF + bulk), and follow Microchip's recommended PCB layout for the TQFP-100 exposed-pad variant if used. For migration to a lower-power PIC32MX1/2/3/4/5 series, verify peripheral differences in MPLAB X IDE before porting. This page synthesizes distributor pricing, drop-in same-package alternatives, and design notes drawn from the manufacturer datasheet and reference designs, packaged for engineers selecting the PIC32MX564F064LT-I/PT for new designs or replacements.

USD $3.65 在庫あり
PIC32MX564F064LT-V/BG - 80MHz 32-bit MCU 64KB Flash USB-OTG CAN | Microchip
PIC32MX564F064LT-V/BG

PIC32MX564F064LT-V/BG - 80MHz 32-bit MCU 64KB Flash USB-OTG CAN | Microchip

The Microchip Technology PIC32MX564F064LT-V/BG is a 32-bit MIPS32 M4K PIC microcontroller operating at up to 80 MHz with 64 KB Flash and 32 KB SRAM, housed in a 121-pin TFBGA (10x10 mm) package for space-constrained high-IO embedded designs. It integrates USB-OTG, CAN, 10-bit ADC, and DMA on a single die, enabling compact communication gateways and industrial control nodes. A PIC microcontroller (Programmable Integrated Circuit MCU) is a microcontroller built around a Harvard-architecture CPU with on-chip Flash, RAM, and a rich peripheral set. Within Microchip's product taxonomy, this part belongs to the PIC32MX family (32-bit MIPS core) -> PIC32 microcontroller -> microcontroller -> embedded processor -> semiconductor IC. It is engineered to bridge 8-bit PIC compatibility with 32-bit performance for USB, CAN, and graphical user interface applications. Key features include 64 KB (64K x 8) Flash program memory, 32 KB SRAM, 8 DMA channels, a 10-bit ADC with multiple channels, USB-OTG full-speed on-chip transceiver, CAN 2.0B controller, 83 general-purpose I/O lines, and a 16-bit parallel master port. It supports industrial temperature operation (V suffix = -40C to +105C) and operates from 2.3V to 3.6V supply. The MIPS32 M4K core delivers 1.56 DMIPS/MHz (Dhrystone 2.1) with single-cycle hardware multiply/divide, while the on-chip DMA controller offloads peripheral data movement to improve throughput for USB, CAN, and ADC streams. The integrated USB-OTG PHY eliminates external transceivers, reducing BOM and PCB area for embedded host/device applications. Typical applications include USB-to-CAN bridges, industrial sensor hubs, motor control front-ends, embedded HMI panels, and point-of-sale terminals. Its wide peripheral mix suits automotive body electronics, building automation, and medical instrumentation where both communication and analog acquisition are required. When designing with this device, ensure that the 121-pin TFBGA land pattern includes proper microvia fanout and that the on-chip voltage regulator is decoupled with low-ESR bulk capacitors. Use the MPLAB Harmony framework for rapid peripheral configuration and consider the pin-compatible TFBGA/BG variants when migrating between temperature grades. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet. Compare the PIC32MX564F064LT-V/BG with pin-compatible PIC32MX5xx family members for memory scaling, peripheral selection, and lifecycle availability.

USD $6.08 在庫あり
PIC32MX564F128H-V/MR - 80MHz 32-bit MCU USB OTG 128KB | Microchip
PIC32MX564F128H-V/MR

PIC32MX564F128H-V/MR - 80MHz 32-bit MCU USB OTG 128KB | Microchip

The Microchip Technology PIC32MX564F128H-V/MR is a 32-bit MIPS MCU based on the MIPS32 M4K core, delivering 80 MHz CPU performance with 128 KB Flash and 32 KB SRAM in a 64-pin VQFN (9x9) package. It integrates USB 2.0 Full-Speed On-The-Go, a 10-bit 1 Msps ADC with up to 16 channels, DMA, and a wide set of serial peripherals (UART, SPI, I2S, I2C) targeted at embedded USB, HMI, and mixed-signal designs. The 'V' temperature grade extends operating range from -40C to +105C for industrial environments. A 32-bit microcontroller (MCU) is a single-chip processor integrating a CPU core, Flash program memory, SRAM data memory, and programmable peripherals. PIC32MX devices sit in Microchip's MIPS-based 32-bit MCU family, bridging 16-bit PIC24/dsPIC and the higher-end Cortex-M SAM families. They are positioned as low-cost, USB-capable 32-bit solutions for industrial and consumer embedded designs. Key features include MIPS16e code compression for up to 40% smaller code density, a 5-stage pipeline with hardware multiply/divide, 16-channel 10-bit ADC, 4-wire resistive touch controller, and parallel master port for external memory or graphics. The integrated USB OTG controller supports Host, Device, and On-The-Go roles without an external PHY. Architecturally, the PIC32MX5xx family is built on a 0.25um process with on-chip 1.5 kB instruction cache and prefetch buffer that boost Flash throughput at 80 MHz core clock. The 5-channel DMA controller offloads ADC, SPI, UART, and I2S transfers, freeing the CPU for application logic. Typical applications include USB peripherals (HID, CDC, MSD), industrial control panels, home automation gateways, sensor hubs with logging, and low-cost graphical HMI. Its USB OTG capability is especially valuable when the device must toggle between host (reading a USB flash drive) and device (PC tether) roles. When designing, ensure the 64-pin VQFN exposed pad is soldered to a sufficient copper area for thermal dissipation at full 80 MHz. Decouple each VDD/VUSB pair with 100 nF plus 4.7 uF bulk; route the 8 MHz primary oscillator traces short and guarded. Use Microchip's MPLAB X IDE plus Harmony or legacy MLA stacks for USB class drivers. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $4.32 在庫あり