集積回路

サブカテゴリ

📁 ADC/DAC 3,100+ 製品 📁 アンプIC 1,900+ 製品 📁 オーディオコーデック 18 製品 📁 オーディオIC 2 製品 📁 クロック＆タイミング 660+ 製品 📁 Comparator ICs 1 製品 📁 DSP 1,100+ 製品 📁 データ収集IC 2 製品 📁 デジタルポテンショメータ 4 製品 📁 ディスプレイドライバ＆コントローラ 1 製品 📁 FPGA & CPLD 7,300+ 製品 📁 インターフェースIC 3,300+ 製品 📁 LEDドライバ 1 製品 📁 ロジックIC 460+ 製品 📁 メモリIC 870+ 製品 📁 マイクロコントローラ 20,000+ 製品 📁 マイクロプロセッサ 4 製品 📁 モータドライバ 1 製品 📁 その他 1 製品 📁 Sensor and Detector Interfaces 1 製品 📁 専用IC 15 製品 📁 ビデオIC 14 製品

製品 (39,000+)

STM32F072CBT7 - 48MHz Cortex-M0 MCU with USB/CAN | STMicroelectronics
STM32F072CBT7

STM32F072CBT7 - 48MHz Cortex-M0 MCU with USB/CAN | STMicroelectronics

The STMicroelectronics STM32F072CBT7 is a 32-bit ARM Cortex-M0 microcontroller with a 48 MHz CPU, 128 KB of Flash memory, and USB and CAN connectivity, housed in a 48-LQFP 7 x 7 mm package. It belongs to the STM32F0 mainstream MCU family and targets compact embedded systems requiring USB, CAN, and a moderate processing speed. A microcontroller is an integrated circuit that combines a processor core, memory, and peripheral interfaces on one semiconductor device. The STM32F0 series sits within the broader embedded-control hierarchy: MCU -> microcontroller -> embedded processor -> semiconductor. Compared with discrete logic controllers, an MCU provides firmware execution, state management, communication, timing, and direct control of external sensors, actuators, and human-interface circuits. The verified product listing identifies a 48 MHz ARM Cortex-M0 core, 128 KB Flash, USB, CAN, and a 48-LQFP package. The STM32F072CBT7 is therefore suited to USB-enabled control devices, CAN-connected equipment, embedded instrumentation, and compact industrial modules. The exact RAM size, ADC specifications, GPIO count, supply limits, and package dimensions are not included in the supplied verified data and should be confirmed in the manufacturer datasheet before a production design is released. The MCU architecture supports embedded control workloads where deterministic peripheral operation and compact software support matter. USB and CAN are valuable when a design must communicate with a host, service tool, test fixture, or networked peripheral. Compared with a higher-performance Cortex-M system, the Cortex-M0 core provides a simpler embedded platform, while the 48 MHz operating point remains suitable for control loops, protocol handling, user-interface scanning, and supervisory logic. Typical applications include USB-to-control embedded modules, CAN-connected industrial controllers, compact sensor hubs, low-cost communication boards, and battery-powered instrumentation. Designers should provide stable power, decoupling, clock routing, reset handling, and programming access in accordance with the manufacturer reference information. The 48-LQFP package is also relatively easy to inspect and rework compared with very fine-pitch packages. The main engineering trade-off is that the verified listing does not provide a complete electrical and memory map, so firmware planning should be based on the official datasheet and reference manual rather than assumptions. This page consolidates the verified distributor description, package information, sourcing links, and application context while clearly marking unspecified technical data for confirmation.

見積もり お問い合わせ
STM32F072CBU6 - 48MHz 128KB USB MCU | STMicroelectronics
STM32F072CBU6

STM32F072CBU6 - 48MHz 128KB USB MCU | STMicroelectronics

The STMicroelectronics STM32F072CBU6 is an ARM Cortex-M0 32-bit microcontroller operating up to 48 MHz, with 128 KB of flash memory and a 48-UFQFPN 7 x 7 mm package. It combines a USB full-speed device interface, CAN, 12-bit ADC, 12-bit DAC, and multiple 16-bit and 32-bit timers in one compact embedded-control device. A microcontroller is a programmable integrated circuit that executes firmware, reads sensor and control inputs, and drives outputs within an embedded system. The STM32F072 belongs to the STM32F0 value-line family of 32-bit microcontrollers and provides a practical balance of processing speed, connectivity, analog resources, memory, and package density for compact control systems. Key verified features include the 48 MHz ARM Cortex-M0 core, 128 KB flash, one USB full-speed device port, one CAN interface, one 12-bit ADC, and one two-channel 12-bit DAC. The source material also identifies seven 16-bit timers and one 32-bit timer. These resources support USB-connected peripherals, industrial or automotive communication, analog signal acquisition, precision control outputs, and embedded human-interface designs. The STM32F0 architecture supports efficient real-time control while retaining a straightforward 32-bit instruction set. Its combination of USB, CAN, dual-resolution analog conversion, and timers permits multiple peripherals to share one device. Firmware support and peripheral configuration must still be reviewed for each application because alternate-function mapping, clock settings, low-power behavior, and analog limits affect the final design. Typical uses include USB data acquisition, CAN-connected sensors, motor and actuator control, industrial interface modules, compact instruments, and low-cost embedded platforms. In each case, the 48 MHz core provides computational headroom, while the 7 x 7 mm UFQFPN package supports compact board layouts when pad geometry, exposed-pad soldering, and signal integrity are handled correctly. Designers should route USB and high-speed or sensitive analog signals with short return paths, provide the required bypass and interface components, and verify pin multiplexing before final routing. Firmware migration from another STM32 family should also be tested because peripheral behavior, register details, and application-specific timing may differ even when the physical package is retained. This product record combines the verified distributor and manufacturer information with practical interface and replacement guidance. It distinguishes verified facts from unspecified electrical limits, identifies packaging and sourcing information, and emphasizes the need to verify firmware, pin multiplexing, and manufacturer documentation before production use.

見積もり お問い合わせ
STM32F072CBU6TR - 48MHz Cortex-M0 MCU | STMicroelectronics
STM32F072CBU6TR

STM32F072CBU6TR - 48MHz Cortex-M0 MCU | STMicroelectronics

The STMicroelectronics STM32F072CBU6TR is an ARM Cortex-M0 32-bit RISC microcontroller operating at up to 48 MHz, with 128 KB of Flash memory and USB, CAN, and peripheral connectivity, housed in a 48-pin UFQFPN 7 x 7 mm package. The STM32F072x8/xB family combines a 32-bit MCU core, embedded memory, communication interfaces, and low-power control in one compact surface-mount device. Its 48-pin UFQFPN package is intended for space-constrained embedded systems requiring more GPIO and communication options than smaller STM32 packages. An MCU is a programmable integrated circuit used to monitor inputs, execute firmware, control outputs, and manage communication between sensors, actuators, communications links, and human-facing systems. The STM32F072x8/xB family is positioned within the STM32 microcontroller portfolio for embedded control, connectivity, and USB-enabled designs. According to the STMicroelectronics product page, the family uses the high-performance ARM Cortex-M0 core and operates at up to 48 MHz. Key verified features include a 32-bit architecture, 48 MHz maximum operating frequency, and 128 KB of Flash memory described by DigiKey as 128K x 8. Mouser identifies the device as an MCU in the USB line with USB, CAN, 128 KB of Flash, and a 48 MHz CPU. These interfaces support designs that need local control together with wired USB or CAN connectivity, although the exact peripheral availability and operating limits should be confirmed against the manufacturer datasheet for the selected ordering code. The device uses a 48-pin UFQFPN package with an exposed-pad-centered 7 x 7 mm format. The UFQFPN is a surface-mount package family that supports compact PCB layouts while providing many external connection points. Exact pin names, exposed-pad connections, electrical limits, and recommended decoupling values are not included in the supplied web excerpts and are marked as data needed where necessary rather than inferred. Typical applications include USB-connected embedded controllers, CAN-connected industrial or automotive peripheral nodes, sensor-hub systems, compact control boards, and low-power monitoring products. The 48 MHz Cortex-M0 core is suitable for real-time control loops, while USB and CAN support interfaces to host computers, test equipment, or other embedded controllers. For PCB design, place required bypass capacitors close to the supply pins, follow the exposed-pad land pattern and thermal-via recommendations in the manufacturer package drawing, and confirm the pin multiplexing and alternate-function assignments before finalizing firmware. This page combines the verified distributor and manufacturer information with procurement guidance and engineering-oriented selection notes.

見積もり お問い合わせ
STM32F072CBU7 - 48MHz Cortex-M0 USB MCU | STMicroelectronics
STM32F072CBU7

STM32F072CBU7 - 48MHz Cortex-M0 USB MCU | STMicroelectronics

The STMicroelectronics STM32F072CBU7 is an ARM Cortex-M0 32-bit microcontroller operating up to 48 MHz, with 128 KB of flash memory and USB, CAN, and embedded connectivity in a 48-pin UFQFPN package measuring 7 x 7 mm. It is designed for compact embedded systems requiring USB device connectivity and CAN communication. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, peripherals, and communication interfaces on one integrated circuit. The STM32F072CBU7 belongs to the STM32F0 family of ARM Cortex-M0 embedded processors, combining a low-complexity RISC architecture with serial connectivity and real-time peripherals. Its 32-bit instruction set and integrated flash support compact firmware for control, data acquisition, and communication functions. The verified source data identifies the device as an ARM Cortex-M0 MCU with 128 KB flash, 48 MHz maximum operating frequency, USB, and CAN support. The part is supplied in a 48-UFQFPN 7 x 7 mm package. Arrow additionally identifies the STM32F072CBU7 as a 2.5 V or 3.3 V, 48-pin UFQFPN device with an exposed pad and tray packaging. Other electrical limits, RAM capacity, peripheral details, pin assignments, and temperature ratings were not included in the supplied evidence and require confirmation from the manufacturer datasheet. Typical applications include USB-connected control equipment, industrial monitoring, low-speed CAN network nodes, data loggers, human-interface equipment, and compact embedded control platforms. USB is useful for configuration, firmware updates, and data exchange with a host computer, while CAN supports robust communication between embedded nodes in industrial or automotive-adjacent systems. The 48 MHz Cortex-M0 core provides a practical balance between processing capability, power efficiency, and software simplicity. Designers should verify the complete pinout, exposed-pad connection, decoupling requirements, clock configuration, and peripheral electrical limits against the official STMicroelectronics datasheet before layout. USB signal routing, especially differential impedance and grounding, requires careful PCB planning. The verified distributor records do not provide a complete datasheet-derived electrical table, so unverified current, voltage, memory, timing, and compliance claims should not be assumed. This product record combines verified distributor identification, manufacturer-family information, practical application context, and source-linked comparison data for engineers evaluating the STM32F072CBU7.

見積もり お問い合わせ
STM32F072CBU7TR - 48MHz Cortex-M0 USB/CAN MCU | STMicroelectronics
STM32F072CBU7TR

STM32F072CBU7TR - 48MHz Cortex-M0 USB/CAN MCU | STMicroelectronics

STMicroelectronics STM32F072CBU7TR is an ARM Cortex-M0 32-bit microcontroller IC operating at up to 48 MHz, with 128 KB of flash memory and USB and CAN connectivity, housed in a 48-pin UFQFPN (7x7) package. The device is a member of the STM32F072x8/xB microcontroller family, combining a compact surface-mount format with a USB-capable mainline Arm Cortex-M0 platform for embedded control, communications, and low-cost USB-connected products. A microcontroller is a programmable integrated circuit that integrates a processor core, memory, and peripherals into one device. In the product hierarchy, the STM32F072CBU7TR is a microcontroller, which is an embedded processor and a semiconductor. Its Arm Cortex-M0 core provides a 32-bit RISC architecture, while the USB line MCU configuration supports designs that need wired USB connectivity alongside general-purpose embedded control. The verified configuration provides 128 KB of flash memory, described by the distributor data as 128K x 8, for program storage. Operation reaches 48 MHz, giving designers a higher clock rate than basic Cortex-M0 devices while retaining a simple embedded architecture. The listed supply configuration is 2.5 V/3.3 V, making the MCU suitable for conventional low-voltage embedded systems. USB and CAN are explicitly identified as principal connectivity features of this part. The 48-UFQFPN package measures 7 x 7 mm and is supplied in tape-and-reel form for automated production assembly. Its small area supports compact PCB layouts, but the fine-pitch package and exposed thermal-pad construction require careful land-pattern, paste-volume, and reflow control. The UFQFPN format also means that PCB design should provide adequate exposed-pad copper and thermal paths rather than treating the bottom pad as an optional connection. Typical applications include USB-connected data loggers, CAN-connected industrial or automotive peripherals, compact control boards, USB bootloaders, and cost-sensitive embedded systems that need a 48 MHz Cortex-M0 core. For USB designs, the MCU can serve as the protocol controller while an external transceiver provides the physical USB interface. For CAN designs, a dedicated CAN transceiver such as the TCAN334DR can provide the physical bus interface required by STM32F072CBU7TR's CAN capability. When designing the PCB, verify the exposed-pad soldering requirements and maintain the recommended input, ground, and decoupling layout around the device. Because the verified source data does not provide the complete numbered pin list, engineers should use the manufacturer datasheet and package drawing rather than infer pin assignments from generic 48-pin QFN diagrams. This product page consolidates verified distributor specifications, price and availability references, interface-focused applications, practical package guidance, and clearly qualified replacement options. It separates confirmed parameters from engineering details that still require confirmation in the manufacturer datasheet, helping designers move from part selection to a robust embedded layout.

見積もり お問い合わせ
STM32F072CBY6TR - 48MHz Cortex-M0 128KB MCU | STMicroelectronics
STM32F072CBY6TR

STM32F072CBY6TR - 48MHz Cortex-M0 128KB MCU | STMicroelectronics

STMicroelectronics STM32F072CBY6TR is an ARM Cortex-M0 32-bit STM32F0 series microcontroller operating at 48 MHz, with 128 KB of flash memory in a 49-WLCSP package. The verified distributor data identifies USB, CAN, a 2.5 V or 3.3 V supply context, and a 49-pin WLCSP tape-and-reel package. It is a compact embedded-control MCU for applications requiring integrated connectivity and peripheral support without a larger leaded package. What is an STM32F0 microcontroller? An MCU is a semiconductor that combines a processor core, flash memory, RAM, clocks, and peripherals on one integrated circuit. The STM32F0 family is based on the ARM Cortex-M0 processor, a low-complexity 32-bit architecture intended for cost-sensitive embedded control. USB and CAN connectivity place the STM32F072CBY6TR above a basic GPIO-only controller while retaining the STM32F0 focus on compact embedded systems. The verified product data identifies a 48 MHz ARM Cortex-M0 core and 128 KB (128 K x 8) flash. Mouser describes the device as an STM32F0 USB-line MCU with USB and CAN support, while distributor listings identify the 49-WLCSP package. Exact RAM size, GPIO count, ADC ratings, timer details, voltage limits, and package dimensions are not included in the supplied source data and therefore require confirmation from the manufacturer documentation before a design release. The architecture is suited to USB-connected peripherals, CAN nodes, compact industrial controls, and low-cost embedded products. A 48 MHz Cortex-M0 core provides the timing baseline for protocol handling and control tasks, while the integrated USB and CAN interfaces reduce the need for external communication controllers. Designers must still budget peripheral pins, clocks, decoupling, signal integrity, and firmware configuration according to the actual board requirements. Typical use includes a USB-to-serial or configuration interface, a CAN-connected sensor node, a compact industrial controller, a USB peripheral, and a small consumer-device control module. The 49-WLCSP format is especially useful when board area is constrained, but its fine pitch requires careful PCB design, inspection, and assembly capability. Confirm the exposed-pad and ball assignments in the official pinout before layout. When designing around STM32F072CBY6TR, use the manufacturer datasheet for the definitive electrical limits, memory map, peripheral multiplexing, clock tree, and package drawing. Place required decoupling close to the device, preserve USB impedance-controlled routing, and validate CAN termination and transceiver interface layout. The supplied web results support sourcing and identity, but they do not provide every electrical value needed for a complete production design. This page combines verified distributor identity, package, processor, flash, connectivity, and commercial-search information with explicit engineering caveats. It is intended to support initial component selection and sourcing, while signaling which technical details must be checked against the official STMicroelectronics documentation before schematic sign-off or firmware deployment.

見積もり お問い合わせ
STM32F072CBY7TR - 48MHz Cortex-M0 MCU | STMicroelectronics
STM32F072CBY7TR

STM32F072CBY7TR - 48MHz Cortex-M0 MCU | STMicroelectronics

The STMicroelectronics STM32F072CBY7TR is a 32-bit ARM Cortex-M0 microcontroller operating up to 48 MHz, with 128 KB of Flash memory and 16 KB of RAM in a 49-ball WLCSP package measuring 3.28 mm by 3.11 mm. The device belongs to the STM32F0 mainstream MCU family and combines USB, CAN, and general-purpose embedded-control connectivity in a compact surface-mount package. An STM32F0-series microcontroller is an embedded-processing semiconductor that combines an ARM Cortex-M0 CPU core, nonvolatile Flash program memory, volatile SRAM, peripherals, and communication interfaces on one integrated circuit. The STM32F0 family is positioned below more highly integrated microcontrollers in complexity, making it suitable for cost-sensitive control, communications, sensing, and USB-device designs where deterministic real-time behavior is more important than a high-performance multicore architecture. The verified device data identifies a 32-bit ARM Cortex-M0 core operating at 48 MHz, 128 KB of Flash organized as 128K x 8, and 16 KB of SRAM. Its listed peripheral set includes USB and CAN, supporting USB-enabled data acquisition, industrial communication, service interfaces, and connected peripheral equipment. Tape-and-reel ordering is identified by the TR suffix, while the 49-WLCSP construction supports dense, space-constrained PCB layouts. The STM32F072CBY7TR combines a compact 48-MHz processing core with dedicated communications functions in a single package. USB can simplify a direct host-to-device interface without requiring a separate USB controller, while CAN provides a standardized communication option for industrial and embedded networks. The 128 KB Flash capacity provides room for application firmware, boot logic, configuration data, and protocol stacks, while 16 KB of SRAM accommodates working state, buffers, and stack usage. Typical applications include USB-connected sensors, USB data loggers, CAN-capable industrial controllers, compact motor-control modules, low-cost communication gateways, and accessory-control boards. In each case, engineers can use the USB or CAN interface to exchange data while the Cortex-M0 core handles peripheral sampling, control logic, and user-interface functions. Firmware and peripheral configuration must still be validated against the complete STMicroelectronics datasheet before production release. The most important design consideration is the 49-ball WLCSP layout. Its 3.28 mm by 3.11 mm footprint has very limited pad pitch and exposed assembly tolerances compared with leaded packages, so PCB design, stencil selection, solder-paste volume, placement, and reflow-profile validation are essential. Board layout should also preserve USB impedance routing and separate analog or sensitive signal paths from switching and high-current circuitry. This product record combines verified distributor specifications, procurement context, practical package guidance, and explicitly qualified drop-in candidates. It distinguishes electrically similar devices from fully validated replacements, helping engineers evaluate the STM32F072CBY7TR for USB, CAN, embedded-control, and compact embedded-system designs.

見積もり お問い合わせ
STM32F072R8T6 - 48MHz Cortex-M0 64KB MCU | STMicroelectronics
STM32F072R8T6

STM32F072R8T6 - 48MHz Cortex-M0 64KB MCU | STMicroelectronics

The STMicroelectronics STM32F072R8T6 is an ARM Cortex-M0 32-bit RISC microcontroller operating up to 48 MHz, with 64 KB of Flash memory and 16 KB of SRAM, in a 64-LQFP 10 x 10 mm package. It belongs to the STM32F0 mainstream MCU family and integrates USB, CAN, GPIO, timers, communication peripherals, and low-power features for embedded control designs. A microcontroller is a programmable semiconductor device that combines a processor core, memory, and peripherals on one integrated circuit. In the hierarchy of embedded semiconductors, the STM32F072R8T6 is a general-purpose MCU, while its ARM Cortex-M0 core provides deterministic 32-bit instruction execution for real-time control, communication, and human-interface applications. Verified listing information identifies the device as a 48 MHz ARM Cortex-M0 MCU with 64 KB Flash, 16 KB SRAM, USB, CAN, and a 64-LQFP package. The STM32F0 family is suited to USB-enabled peripherals, CAN-connected equipment, industrial control modules, motor-control support, sensor nodes, and cost-constrained consumer products. Its 2 V to 3.6 V operating range, as reported by the verified search data, supports common embedded supply systems. The STM32F072x8/xB device family combines high-performance processing with embedded peripherals and flexible memory options. The USB interface and CAN capability are important differentiators for designs that need device connectivity alongside general-purpose control. Exact peripheral counts, pin names, electrical limits, and timing values must be confirmed in the manufacturer datasheet before a production design is released. Typical applications include USB-to-serial accessories, CAN gateway boards, motor-control and actuator electronics, industrial sensors, instrumentation, and low-power embedded controllers. Designers should preserve the recommended decoupling and routing practices, provide a stable clock and reset implementation, and verify all unused pins against the selected package pinout. A key design consideration is that firmware compatibility is not guaranteed merely because another MCU has a similar peripheral set. Migration requires checking startup code, memory-map assumptions, interrupt priorities, clock trees, USB or CAN configuration, and package-level pin assignments. The STM32F072R8T6 is best selected when its verified 64 KB Flash, 48 MHz core, 16 KB SRAM, USB, and CAN combination matches the system requirements. This page combines the verified manufacturer and distributor listing information with package-aware engineering context, application guidance, and replacement checks. Because the supplied search results do not include complete manufacturer electrical tables or a verified pin-by-pin mapping, unavailable values are explicitly marked rather than inferred.

見積もり お問い合わせ
STM32F072R8T6TR - 48MHz 64KB Cortex-M0 MCU | STMicroelectronics
STM32F072R8T6TR

STM32F072R8T6TR - 48MHz 64KB Cortex-M0 MCU | STMicroelectronics

The STMicroelectronics STM32F072R8T6TR is a 32-bit ARM Cortex-M0 microcontroller operating at up to 48 MHz, with 64 KB of Flash memory and a 64-LQFP 10 x 10 mm package. The device is designed for compact embedded control systems requiring efficient processing, USB connectivity, and a broad set of peripherals. An ARM Cortex-M0 microcontroller is a 32-bit reduced-instruction-set controller used as the central processing unit of embedded products. It combines a low-power architecture with deterministic peripheral access and occupies the microcontroller hierarchy above general-purpose semiconductor logic. The STM32F072 series supports embedded control, connectivity, data acquisition, and low-cost human-interface applications. Verified distributor data identifies a 32-bit architecture, a maximum frequency of 48 MHz, 64 KB Flash organized as 64K x 8, and a 64-LQFP package measuring 10 x 10 mm. These specifications make the part suitable for main-embedded-control designs that need more capability than a basic 8-bit controller while retaining a small package and established STM32 tooling ecosystem. The STM32F072 family is positioned as a high-performance STM32F0-series MCU with embedded ARM Cortex-M0 processing. The STM32F072R8T6TR ordering code identifies the Flash-density, package, temperature, and tape-and-reel variants; the verified source confirms the 64-LQFP package and 64 KB Flash configuration. Typical applications include USB-connected peripheral control, compact data-acquisition equipment, industrial control modules, consumer accessories, and embedded instruments. Designers should confirm peripheral availability, pin multiplexing, operating voltage, timing, and temperature limits in the manufacturer datasheet before releasing a production design. The 10 x 10 mm LQFP package provides accessible leads for assembly and inspection while supporting a higher pin count than small leadless packages. Layout must preserve adequate decoupling, clock integrity, USB signal routing, and programming access. This page consolidates verified manufacturer and distributor information, practical application context, sourcing questions, and package-aware engineering guidance so engineers can evaluate the STM32F072R8T6TR efficiently.

見積もり お問い合わせ
STM32F072R8T7 - 48MHz Cortex-M0 MCU with 64KB Flash | STMicroelectronics
STM32F072R8T7

STM32F072R8T7 - 48MHz Cortex-M0 MCU with 64KB Flash | STMicroelectronics

The STMicroelectronics STM32F072R8T7 is an ARM Cortex-M0 32-bit microcontroller operating at up to 48 MHz, with 64 KB of Flash memory and USB, CAN, and embedded connectivity features, housed in a 64-LQFP 10 x 10 mm package. A microcontroller is a programmable integrated circuit that combines a processor core, memory, peripherals, and communication interfaces on one semiconductor device. The STM32F0 family belongs to the embedded-processor hierarchy and is intended for compact control systems, connected products, industrial equipment, and USB-enabled peripherals. Its 32-bit ARM Cortex-M0 core provides a common instruction set and development ecosystem for embedded firmware development. The STM32F072R8T7 combines 64 KB Flash with a 48 MHz maximum operating frequency. The verified distributor listing identifies USB and CAN connectivity, while the official STMicroelectronics page identifies the STM32F072x8/xB device family. These interfaces make the device relevant to designs requiring USB device connectivity, CAN communication, or embedded control without using a larger microcontroller package. The STM32F072R8T7 is packaged as a 64-LQFP 10 x 10 mm device. The R8 designation is associated with the STM32F072x8 family, and the T7 ordering suffix identifies the supplied temperature and packaging configuration. Exact operating voltage limits, RAM capacity, GPIO count, ADC specifications, clock details, and electrical limits were not included in the supplied verified excerpts and are therefore not inferred here. Typical application domains include USB-enabled control devices, CAN-connected industrial or embedded systems, sensor-control platforms, communication peripherals, and compact consumer equipment. In a USB peripheral, the MCU can manage device communication alongside application logic; in a CAN node, it can combine control processing with bus connectivity. The 48 MHz core provides a defined performance target for firmware scheduling and peripheral control. For PCB design, use the manufacturer pinout and package drawing, confirm the exact LQFP land pattern, route USB and CAN signals according to their interface requirements, and validate power, decoupling, clock, and exposed-pad connections against the complete manufacturer datasheet. This page summarizes verified distributor and manufacturer information, supported connectivity, package data, and procurement sources without guessing undocumented electrical values.

見積もり お問い合わせ
STM32F072RBH6 - 48MHz Cortex-M0 128KB MCU | STMicroelectronics
STM32F072RBH6

STM32F072RBH6 - 48MHz Cortex-M0 128KB MCU | STMicroelectronics

The STMicroelectronics STM32F072RBH6 is a 32-bit ARM Cortex-M0 microcontroller operating at 48 MHz, with 128 KB of Flash memory, 16 KB of SRAM, USB, CAN, and CEC connectivity, and a 64-pin UFBGA package measuring 5 mm by 5 mm. Designed for compact embedded systems, this STM32F0 device combines a low-cost microcontroller platform with USB and CAN support in a very small package. A microcontroller is a semiconductor device that integrates a processor core, memory, peripherals, and communication interfaces into one embedded-control component. The ARM Cortex-M0 core uses a compact instruction set intended for cost-sensitive applications, while the STM32F072RBH6 adds 128 KB of Flash for firmware and 16 KB of SRAM for working data. USB, CAN, and CEC interfaces allow the device to connect to host systems, industrial networks, and consumer-electronics control signals. Key verified features include a 32-bit ARM Cortex-M0 core, a maximum CPU frequency of 48 MHz, 128 KB of 128 K x 8 Flash, and 16 KB of SRAM. The device is identified as a mainstream USB-line MCU with CAN and CEC functions. Its 64-UFBGA package supports compact board layouts, but the dense 5 mm by 5 mm land pattern requires careful PCB design, inspection, and assembly planning. The STM32F072RBH6 belongs to the STM32F0 family and is positioned between simple control MCUs and more highly integrated connectivity devices. Its combination of USB and CAN is useful for portable accessories, industrial monitoring nodes, USB-to-CAN gateways, and embedded human-interface systems. The exact peripheral configuration, operating-temperature range, voltage limits, pin functions, and electrical timing values require confirmation from the manufacturer datasheet. Typical applications include USB-connected control devices, CAN-based industrial or automotive-adjacent monitoring equipment, consumer peripherals, low-cost embedded controllers, and compact sensor-interface products. Firmware development should use the STM32F0 toolchain and account for the package's fine-pitch ball assignment and exposed-pad requirements. For a new design, verify every ball assignment, power domain, decoupling requirement, and exposed-pad connection against the official STM32F072RBH6 documentation before layout release. Because the verified search results identify the package as 64-UFBGA (5 x 5), use the exact manufacturer land pattern rather than a generic 64-pin QFN footprint. This product page consolidates distributor specifications, source links, procurement information, and engineering-oriented usage guidance for the STM32F072RBH6. It is intended to support initial component selection while directing engineers to the official STMicroelectronics datasheet for authoritative pinout, electrical, and reliability data.

見積もり お問い合わせ
STM32F072RBH6TR - 48MHz Cortex-M0 128KB MCU | STMicroelectronics (Tape & Reel)
STM32F072RBH6TR

STM32F072RBH6TR - 48MHz Cortex-M0 128KB MCU | STMicroelectronics (Tape & Reel)

The STMicroelectronics STM32F072RBH6TR is a 32-bit ARM Cortex-M0 microcontroller operating at 48 MHz, with 128 KB of Flash memory, 16 KB of SRAM, USB, CAN, and CEC connectivity, and a 64-pin UFBGA package measuring 5 mm by 5 mm. Designed for compact embedded systems, this STM32F0 device combines a low-cost microcontroller platform with USB and CAN support in a very small package. A microcontroller is a semiconductor device that integrates a processor core, memory, peripherals, and communication interfaces into one embedded-control component. The ARM Cortex-M0 core uses a compact instruction set intended for cost-sensitive applications, while the STM32F072RBH6TR adds 128 KB of Flash for firmware and 16 KB of SRAM for working data. USB, CAN, and CEC interfaces allow the device to connect to host systems, industrial networks, and consumer-electronics control signals. Key verified features include a 32-bit ARM Cortex-M0 core, a maximum CPU frequency of 48 MHz, 128 KB of 128 K x 8 Flash, and 16 KB of SRAM. The device is identified as a mainstream USB-line MCU with CAN and CEC functions. Its 64-UFBGA package supports compact board layouts, but the dense 5 mm by 5 mm land pattern requires careful PCB design, inspection, and assembly planning. The STM32F072RBH6TR belongs to the STM32F0 family and is positioned between simple control MCUs and more highly integrated connectivity devices. Its combination of USB and CAN is useful for portable accessories, industrial monitoring nodes, USB-to-CAN gateways, and embedded human-interface systems. The exact peripheral configuration, operating-temperature range, voltage limits, pin functions, and electrical timing values require confirmation from the manufacturer datasheet. Typical applications include USB-connected control devices, CAN-based industrial or automotive-adjacent monitoring equipment, consumer peripherals, low-cost embedded controllers, and compact sensor-interface products. Firmware development should use the STM32F0 toolchain and account for the package's fine-pitch ball assignment and exposed-pad requirements. For a new design, verify every ball assignment, power domain, decoupling requirement, and exposed-pad connection against the official STM32F072RBH6TR documentation before layout release. Because the verified search results identify the package as 64-UFBGA (5 x 5), use the exact manufacturer land pattern rather than a generic 64-pin QFN footprint. This product page consolidates distributor specifications, source links, procurement information, and engineering-oriented usage guidance for the STM32F072RBH6TR. It is intended to support initial component selection while directing engineers to the official STMicroelectronics datasheet for authoritative pinout, electrical, and reliability data.

見積もり お問い合わせ
STM32F072RBT6 - 48MHz Cortex-M0 MCU, 128KB Flash, USB/CAN | ST
STM32F072RBT6

STM32F072RBT6 - 48MHz Cortex-M0 MCU, 128KB Flash, USB/CAN | ST

The STMicroelectronics STM32F072RBT6 is a 32-bit ARM Cortex-M0 mainstream microcontroller operating at up to 48 MHz, integrating 128 KB of embedded Flash and 16 KB of SRAM in a 64-pin LQFP (10x10 mm) surface-mount package. A microcontroller (MCU) is a single integrated circuit that combines a processor core, memory, and programmable peripherals on one die, sitting at the lowest level of the embedded-system hierarchy: MCU -> embedded processor -> computing system. The STM32F0 series is positioned inside ST's broader STM32 family of ARM-based 32-bit MCUs, targeting cost-sensitive mainstream designs that still require modern connectivity such as USB and CAN. Key specifications of the STM32F072RBT6 include a crystal-less USB 2.0 full-speed device interface, which eliminates the need for an external USB clock crystal and reduces bill-of-materials cost and PCB area, plus a CAN bus controller, HDMI-CEC hardware, and up to 51 general-purpose I/O pins in the 64-LQFP package, many of them 5V-tolerant for direct legacy interfacing. The device also embeds a 12-bit 1 Msps ADC, a 12-bit DAC, multiple 16-bit and 32-bit timers, USART, SPI, I2C, and support for low-power Sleep, Stop and Standby modes. Architecturally, the STM32F072RBT6 is built around the high-performance ARM Cortex-M0 32-bit RISC core with single-cycle I/O access, executing the Thumb-2 instruction set at up to 48 MHz (1.25 DMIPS/MHz). The internal bus matrix connects the core to Flash, SRAM, and peripherals via AHB and APB bridges, while the clock tree is driven by an internal 8 MHz RC and a 48 MHz RC that supports the USB clock domain directly, which is what enables crystal-less USB operation. Typical applications include USB device accessories (HID keyboards, game controllers, USB-C debug probes), CAN-based industrial nodes and automotive-adjacent peripherals, motor control and consumer appliances, and smart-home IoT endpoints where the combination of USB, CAN, and rich 5V-tolerant GPIO density all in a 64-LQFP fits a wide range of mainstream designs. When designing with this part, note that the crystal-less USB relies on the internal 48 MHz HSI48 clock, so compliance testing against USB-IF limits should be planned early; for designs needing tighter USB jitter, an external crystal can be tied to the OSC pins. Also, the 5V-tolerant I/Os are tolerant only when the related VDD is present - do not back-power unpowered banks. This page synthesizes distributor pricing context, drop-in alternative analysis, and practical design notes not found in the manufacturer datasheet, providing information gain for engineers comparing STM32F0 options against NXP LPC, GigaDevice GD32, and other Cortex-M0 mainstream MCUs.

見積もり お問い合わせ
STM32F072RBT6TR - 48MHz Cortex-M0 MCU, 128KB Flash, USB/CAN | ST (Tape & Reel)
STM32F072RBT6TR

STM32F072RBT6TR - 48MHz Cortex-M0 MCU, 128KB Flash, USB/CAN | ST (Tape & Reel)

The STMicroelectronics STM32F072RBT6TR is a 32-bit ARM Cortex-M0 mainstream microcontroller operating at up to 48 MHz, integrating 128 KB of embedded Flash and 16 KB of SRAM in a 64-pin LQFP (10x10 mm) surface-mount package. A microcontroller (MCU) is a single integrated circuit that combines a processor core, memory, and programmable peripherals on one die, sitting at the lowest level of the embedded-system hierarchy: MCU -> embedded processor -> computing system. The STM32F0 series is positioned inside ST's broader STM32 family of ARM-based 32-bit MCUs, targeting cost-sensitive mainstream designs that still require modern connectivity such as USB and CAN. Key specifications of the STM32F072RBT6TR include a crystal-less USB 2.0 full-speed device interface, which eliminates the need for an external USB clock crystal and reduces bill-of-materials cost and PCB area, plus a CAN bus controller, HDMI-CEC hardware, and up to 51 general-purpose I/O pins in the 64-LQFP package, many of them 5V-tolerant for direct legacy interfacing. The device also embeds a 12-bit 1 Msps ADC, a 12-bit DAC, multiple 16-bit and 32-bit timers, USART, SPI, I2C, and support for low-power Sleep, Stop and Standby modes. Architecturally, the STM32F072RBT6TR is built around the high-performance ARM Cortex-M0 32-bit RISC core with single-cycle I/O access, executing the Thumb-2 instruction set at up to 48 MHz (1.25 DMIPS/MHz). The internal bus matrix connects the core to Flash, SRAM, and peripherals via AHB and APB bridges, while the clock tree is driven by an internal 8 MHz RC and a 48 MHz RC that supports the USB clock domain directly, which is what enables crystal-less USB operation. Typical applications include USB device accessories (HID keyboards, game controllers, USB-C debug probes), CAN-based industrial nodes and automotive-adjacent peripherals, motor control and consumer appliances, and smart-home IoT endpoints where the combination of USB, CAN, and rich 5V-tolerant GPIO density all in a 64-LQFP fits a wide range of mainstream designs. When designing with this part, note that the crystal-less USB relies on the internal 48 MHz HSI48 clock, so compliance testing against USB-IF limits should be planned early; for designs needing tighter USB jitter, an external crystal can be tied to the OSC pins. Also, the 5V-tolerant I/Os are tolerant only when the related VDD is present - do not back-power unpowered banks. This page synthesizes distributor pricing context, drop-in alternative analysis, and practical design notes not found in the manufacturer datasheet, providing information gain for engineers comparing STM32F0 options against NXP LPC, GigaDevice GD32, and other Cortex-M0 mainstream MCUs.

見積もり お問い合わせ
STM32F072RBT7 - 48MHz Cortex-M0 128KB MCU | STMicroelectronics
STM32F072RBT7

STM32F072RBT7 - 48MHz Cortex-M0 128KB MCU | STMicroelectronics

The STMicroelectronics STM32F072RBT7 is a 32-bit ARM Cortex-M0 microcontroller operating at up to 48 MHz, with 128 KB of embedded Flash memory and a 64-LQFP 10 mm × 10 mm package. The verified distributor data identifies USB, CAN, a 2.5 V or 3.3 V supply context, and 64 pins. These characteristics place it in the STM32F0 family of low-complexity embedded microcontrollers for compact control, connectivity, and industrial designs. A microcontroller is a semiconductor device that integrates a processor core, program memory, data memory, peripherals, and I/O into one embedded-control platform. The STM32F0 series belongs to the ARM Cortex-M microcontroller hierarchy and combines a low-complexity 32-bit instruction set with dedicated communication and timing peripherals. This makes the STM32F072RBT7 suitable for systems that need deterministic control without a higher-performance application processor. The STM32F072RBT7 combines a 48 MHz ARM Cortex-M0 core with 128 KB of Flash. Verified distributor records also identify USB and CAN connectivity, which can reduce the need for external interface controllers in connected equipment. Its 64-LQFP package provides 64 physical pins and is suitable for through-hole assembly or mixed-technology PCB layouts where a fine-pitch BGA package would be unnecessary. The available evidence confirms a mainstream STM32F0-series product with USB and CAN support, 128 KB Flash, and operation up to 48 MHz. Detailed peripheral assignments, SRAM capacity, voltage limits, pin functions, bootloader behavior, and electrical timing values are not included in the supplied verified data. Those parameters must be confirmed in the manufacturer datasheet before final schematic or firmware release. Typical uses include USB-connected control accessories, CAN-based industrial nodes, compact motor and actuator controllers, sensor-hub boards, and general embedded products where a 32-bit ARM Cortex-M0 MCU is sufficient. The 64-LQFP package is particularly useful when production teams prefer visible solder joints and straightforward inspection. The main design consideration is interface assignment. USB, CAN, oscillators, reset, programming pins, and general-purpose I/O must be mapped against the manufacturer pinout and application requirements before PCB routing. Firmware support, clock configuration, transceiver requirements, and USB or CAN bus protection are outside the supplied data and should be verified against the official documentation. This page consolidates verified manufacturer and distributor information, technical search coverage, pricing context, and design-oriented interpretation. It does not infer undocumented electrical values, and it distinguishes confirmed specifications from data that still requires engineer verification.

見積もり お問い合わせ
STM32F072RBT7TR - 48MHz Cortex-M0 128KB MCU | STMicroelectronics (Tape & Reel)
STM32F072RBT7TR

STM32F072RBT7TR - 48MHz Cortex-M0 128KB MCU | STMicroelectronics (Tape & Reel)

The STMicroelectronics STM32F072RBT7TR is a 32-bit ARM Cortex-M0 microcontroller operating at up to 48 MHz, with 128 KB of embedded Flash memory and a 64-LQFP 10 mm × 10 mm package. The verified distributor data identifies USB, CAN, a 2.5 V or 3.3 V supply context, and 64 pins. These characteristics place it in the STM32F0 family of low-complexity embedded microcontrollers for compact control, connectivity, and industrial designs. A microcontroller is a semiconductor device that integrates a processor core, program memory, data memory, peripherals, and I/O into one embedded-control platform. The STM32F0 series belongs to the ARM Cortex-M microcontroller hierarchy and combines a low-complexity 32-bit instruction set with dedicated communication and timing peripherals. This makes the STM32F072RBT7TR suitable for systems that need deterministic control without a higher-performance application processor. The STM32F072RBT7TR combines a 48 MHz ARM Cortex-M0 core with 128 KB of Flash. Verified distributor records also identify USB and CAN connectivity, which can reduce the need for external interface controllers in connected equipment. Its 64-LQFP package provides 64 physical pins and is suitable for through-hole assembly or mixed-technology PCB layouts where a fine-pitch BGA package would be unnecessary. The available evidence confirms a mainstream STM32F0-series product with USB and CAN support, 128 KB Flash, and operation up to 48 MHz. Detailed peripheral assignments, SRAM capacity, voltage limits, pin functions, bootloader behavior, and electrical timing values are not included in the supplied verified data. Those parameters must be confirmed in the manufacturer datasheet before final schematic or firmware release. Typical uses include USB-connected control accessories, CAN-based industrial nodes, compact motor and actuator controllers, sensor-hub boards, and general embedded products where a 32-bit ARM Cortex-M0 MCU is sufficient. The 64-LQFP package is particularly useful when production teams prefer visible solder joints and straightforward inspection. The main design consideration is interface assignment. USB, CAN, oscillators, reset, programming pins, and general-purpose I/O must be mapped against the manufacturer pinout and application requirements before PCB routing. Firmware support, clock configuration, transceiver requirements, and USB or CAN bus protection are outside the supplied data and should be verified against the official documentation. This page consolidates verified manufacturer and distributor information, technical search coverage, pricing context, and design-oriented interpretation. It does not infer undocumented electrical values, and it distinguishes confirmed specifications from data that still requires engineer verification.

見積もり お問い合わせ
STM32F072V8H6 - 48MHz Cortex-M0 64KB MCU | STMicroelectronics
STM32F072V8H6

STM32F072V8H6 - 48MHz Cortex-M0 64KB MCU | STMicroelectronics

The STMicroelectronics STM32F072V8H6 is a 32-bit ARM Cortex-M0 microcontroller with a 48 MHz operating frequency, 64 KB Flash memory, and a 100-UFBGA 7 x 7 mm package. The device is part of the STM32F0 mainstream MCU family and includes USB, CAN, and embedded-control connectivity according to the verified distributor descriptions. Its compact package and 64K x 8 Flash organization make it suitable for compact USB, CAN, industrial, and embedded control systems where integration and deterministic performance matter. The STM32F072x8/xB family combines a high-performance Cortex-M0 core with embedded memory and peripheral connectivity in a low-footprint device. A microcontroller is a semiconductor device that integrates a processor core, Flash program memory, SRAM, peripherals, and interface controllers into one component. In the hierarchy of semiconductor components, an MCU sits below embedded processor and general-purpose controller categories and above application-specific control devices. The STM32F072V8H6 is therefore positioned between simple fixed-function controllers and higher-performance microprocessors, providing a programmable platform for control loops, communications, and peripheral coordination. Key verified characteristics include the ARM Cortex-M0 core, 32-bit architecture, 48 MHz maximum operating frequency, 64 KB Flash memory, and 100-UFBGA packaging. The product listing also identifies USB, CAN, and an embedded-control-oriented STM32F0 platform. These features make the MCU appropriate for USB-connected peripherals, CAN nodes, industrial interfaces, and compact control products. Compared with a discrete controller, the integrated MCU reduces the number of external components required for processing, firmware storage, communication, and control. The 100-UFBGA package is a compact surface-mount ball-grid package. Ball-grid construction supports dense PCB routing when the board area is constrained, but assembly and inspection require processes suitable for fine-pitch BGA packages. The 7 x 7 mm package should be laid out according to STMicroelectronics land-pattern and assembly guidance rather than treated as a generic QFN footprint. Exact electrical limits, pin names, memory sizes beyond the verified Flash figure, and peripheral details should be confirmed in the manufacturer datasheet. Typical applications include USB peripherals, CAN communication endpoints, industrial automation modules, compact motor-control boards, and low-cost USB power or data products. In each case, the 48 MHz Cortex-M0 core provides the processing baseline for real-time control, while USB and CAN connectivity reduce the need for external interface components. The 64 KB Flash capacity is most appropriate for firmware that requires moderate code density and local storage rather than large application images. Designers should verify the exact package pinout, exposed-ball assignments, power requirements, clock configuration, decoupling, and programming interface against the official STM32F072x8/xB datasheet. BGA assembly should include adequate thermal and electrical design checks. This page consolidates the verified manufacturer and distributor descriptions, package information, pricing references, cross-reference results, and engineering guidance while clearly identifying information that was not supplied by the source data.

見積もり お問い合わせ
STM32F072V8T6 - 48MHz 64KB Cortex-M0 MCU | STMicroelectronics
STM32F072V8T6

STM32F072V8T6 - 48MHz 64KB Cortex-M0 MCU | STMicroelectronics

The STMicroelectronics STM32F072V8T6 is a 32-bit ARM Cortex-M0 microcontroller operating at up to 48 MHz, with 64 KB of Flash memory and 16 KB of SRAM, supplied in a 100-pin LQFP package measuring 14 x 14 mm. The STM32F072V8T6 combines a low-power embedded design with USB, CAN, ADC, DAC, timers, and serial communication peripherals. According to the verified distributor and manufacturer listings, it is an STM32F0-series MCU designed for embedded control, connectivity, and signal-processing applications. Its 48 MHz Cortex-M0 core provides deterministic instruction throughput for control loops, while the STM32 family ecosystem provides extensive firmware, peripheral, and development-tool support. What is an STM32F0-series microcontroller? It is a 32-bit embedded microcontroller, a category of microcontroller and semiconductor device used to monitor sensors, operate actuators, process data, and control communication interfaces. The STM32F072V8T6 belongs to the STM32 family hierarchy: STM32F072V8T6 > STM32F0 series > STM32 family > ARM Cortex-M0 microcontroller > embedded processor > semiconductor. Its combination of USB and CAN connectivity is useful for industrial control, USB peripherals, automotive-style communication subsystems, and compact consumer equipment. Key verified features include a 32-bit ARM Cortex-M0 core, a maximum 48 MHz operating frequency, 64 KB Flash, and 16 KB SRAM. The listed package is 100-LQFP, 14 x 14 mm, providing a larger pin count than lower-density STM32 packages and exposing more GPIO and peripheral options. The device is identified by distributor sources as a USB-line MCU with USB, CAN, and communication interfaces. The verified Mouser listing specifically identifies the part as an ARM Cortex-M0 USB-line MCU with 64 KB Flash, USB, and CAN. The STM32F072V8T6 architecture combines a compact general-purpose core with dedicated peripherals for analog measurement, timing, communications, and control. USB and CAN support can reduce the need for separate interface devices in connected embedded systems. The 100-LQFP package is useful when a design requires more externally accessible pins than smaller packages provide, while its 14 x 14 mm footprint remains compact compared with many higher-pin-count packages. The exact ADC, DAC, timer, voltage, and pin-level parameters are not present in the supplied verified snippets, so those values are marked as data needed rather than inferred. Typical applications include USB-connected data acquisition, industrial sensor controllers, CAN-based equipment, motor and actuator control, embedded gateways, and compact automation products. For USB applications, the MCU can manage device communication alongside timers and analog functions. For CAN-based systems, it can combine network communication with local control and data processing. Compared with a simpler microcontroller, its USB and CAN integration can reduce component count, although firmware, peripheral configuration, and device-specific validation remain necessary. The primary design consideration is package planning. A 100-LQFP footprint is not interchangeable with smaller STM32 packages without a PCB redesign, so power, ground, decoupling, signal-routing, and programming access must be planned against the verified 100-pin package. Firmware should also be validated against the exact STM32F072V8T6 datasheet, especially for pin multiplexing, peripheral electrical limits, clock configuration, and USB/CAN timing. Pricing shown in the verified LCSC result is $2.7757 as of 2026-10-22; distributor availability and prices can change. This product data page combines the verified manufacturer and distributor identity, 48 MHz Cortex-M0 positioning, 64 KB Flash, 16 KB SRAM, USB, CAN, and the 100-LQFP package with practical sourcing and design context. It does not infer unreported electrical limits or claim a substitute part unless the supplied cross-reference evidence establishes same-package compatibility.

見積もり お問い合わせ
STM32F072VBH6 - 48MHz Cortex-M0 128KB MCU | STMicroelectronics
STM32F072VBH6

STM32F072VBH6 - 48MHz Cortex-M0 128KB MCU | STMicroelectronics

The STMicroelectronics STM32F072VBH6 is a 32-bit ARM Cortex-M0 RISC microcontroller operating up to 48 MHz, with 128 KB of Flash memory and a 100-UFBGA 7 x 7 mm package. It is designed for embedded USB, CAN, general-purpose control, and connected-device applications requiring a compact high-pin-count MCU. A microcontroller is a semiconductor device that integrates a processor core, program memory, data memory, peripherals, and communication interfaces into one package. The STM32F0 family belongs to the broader embedded microcontroller hierarchy and is positioned for cost-sensitive applications that need 32-bit processing without the complexity of higher-performance MCU families. The STM32F072VBH6 specifically combines 48 MHz processing, 128 KB Flash, USB, and CAN capabilities. Verified distributor data identifies the part as an ARM Cortex-M0 32-bit MCU with 128 KB Flash, USB, CAN, and a 100-UFBGA 7 x 7 mm package. Mouser describes it as a mainstream ARM Cortex-M0 USB-line MCU, while DigiKey lists the same 48 MHz operating frequency, 128 KB Flash organization, and 100-UFBGA package. The package supports dense PCB integration while exposing the device's broader peripheral and signal capabilities. The device family is appropriate for USB peripherals, CAN-connected equipment, industrial control modules, sensor interfaces, data acquisition systems, and consumer accessories. USB and CAN are especially relevant where a design needs short-range connectivity or robust network communication in an embedded controller. Firmware development should account for the exact STM32F072x8/xB device variant, pin multiplexing, clock configuration, and peripheral mapping before PCB release. The H6 ordering suffix identifies the supplied temperature and packaging configuration within STMicroelectronics' ordering system, but the supplied data does not state a complete temperature range, pinout, memory map, or electrical limits. Those parameters must be confirmed against the official STM32F072VB product page and manufacturer datasheet before design sign-off. For sourcing, compare the exact STM32F072VBH6 ordering code with STM32F072VBH6TR, which is identified in the verified distributor results as a distinct listing with the same 100-UFBGA 7 x 7 mm format. Package, temperature grade, firmware assumptions, and lifecycle requirements should be checked rather than assuming that a related ordering code is interchangeable. This page consolidates verified manufacturer and distributor information, preserves missing technical fields rather than guessing, and provides practical sourcing context for engineers evaluating the STM32F072VBH6.

見積もり お問い合わせ
STM32F072VBH6TR - 48MHz Cortex-M0 128KB MCU | STMicroelectronics (Tape & Reel)
STM32F072VBH6TR

STM32F072VBH6TR - 48MHz Cortex-M0 128KB MCU | STMicroelectronics (Tape & Reel)

The STMicroelectronics STM32F072VBH6TR is a 32-bit ARM Cortex-M0 RISC microcontroller operating up to 48 MHz, with 128 KB of Flash memory and a 100-UFBGA 7 x 7 mm package. It is designed for embedded USB, CAN, general-purpose control, and connected-device applications requiring a compact high-pin-count MCU. A microcontroller is a semiconductor device that integrates a processor core, program memory, data memory, peripherals, and communication interfaces into one package. The STM32F0 family belongs to the broader embedded microcontroller hierarchy and is positioned for cost-sensitive applications that need 32-bit processing without the complexity of higher-performance MCU families. The STM32F072VBH6TR specifically combines 48 MHz processing, 128 KB Flash, USB, and CAN capabilities. Verified distributor data identifies the part as an ARM Cortex-M0 32-bit MCU with 128 KB Flash, USB, CAN, and a 100-UFBGA 7 x 7 mm package. Mouser describes it as a mainstream ARM Cortex-M0 USB-line MCU, while DigiKey lists the same 48 MHz operating frequency, 128 KB Flash organization, and 100-UFBGA package. The package supports dense PCB integration while exposing the device's broader peripheral and signal capabilities. The device family is appropriate for USB peripherals, CAN-connected equipment, industrial control modules, sensor interfaces, data acquisition systems, and consumer accessories. USB and CAN are especially relevant where a design needs short-range connectivity or robust network communication in an embedded controller. Firmware development should account for the exact STM32F072x8/xB device variant, pin multiplexing, clock configuration, and peripheral mapping before PCB release. The H6 ordering suffix identifies the supplied temperature and packaging configuration within STMicroelectronics' ordering system, but the supplied data does not state a complete temperature range, pinout, memory map, or electrical limits. Those parameters must be confirmed against the official STM32F072VB product page and manufacturer datasheet before design sign-off. For sourcing, compare the exact STM32F072VBH6TR ordering code with STM32F072VBH6TRTR, which is identified in the verified distributor results as a distinct listing with the same 100-UFBGA 7 x 7 mm format. Package, temperature grade, firmware assumptions, and lifecycle requirements should be checked rather than assuming that a related ordering code is interchangeable. This page consolidates verified manufacturer and distributor information, preserves missing technical fields rather than guessing, and provides practical sourcing context for engineers evaluating the STM32F072VBH6TR.

見積もり お問い合わせ
STM32F072VBH7 - 48MHz Cortex-M0 128KB MCU | STMicroelectronics
STM32F072VBH7

STM32F072VBH7 - 48MHz Cortex-M0 128KB MCU | STMicroelectronics

The STMicroelectronics STM32F072VBH7 is a 32-bit ARM Cortex-M0 microcontroller with a 48 MHz CPU, 128 KB of Flash, USB, CAN, 12 timers, ADC, DAC, and communication interfaces, supplied in a 100-UFBGA 7 mm x 7 mm package. A microcontroller is an integrated semiconductor device that combines a processor core, program memory, data memory, peripherals, and interface circuitry into one compact component. The STM32F072 series belongs to the STM32F0 mainstream MCU line and is designed for embedded control, communications, data acquisition, USB connectivity, and industrial equipment requiring low power and real-time peripheral integration. The verified source data identifies the STM32F072VBH7 as an ARM Cortex-M0 MCU operating at up to 48 MHz with 128 KB Flash. The device also includes USB full-speed 2.0, CAN, 12 timers, ADC, DAC, and communication interfaces. Its stated operating supply condition includes 2.5 V or 3.3 V, while the distributor listings identify a maximum operating voltage of 3.6 V in the component summary. The 100-UFBGA package provides a compact physical solution for high-density embedded designs while supporting exposed-pad thermal management. Compared with larger leaded packages, UFBGA is particularly useful when board area is constrained. Its fine pitch also increases manufacturing sensitivity, making land-pattern accuracy, solder-paste control, and reflow-profile validation essential. Typical applications include USB-connected embedded peripherals, CAN-based industrial or automotive-adjacent control equipment, motor and power-control systems, data loggers, sensor hubs, consumer products, and communication gateways. The combination of USB, CAN, timers, analog conversion functions, and a 48 MHz ARM core makes the MCU suitable for designs that need multiple peripheral functions without a higher-complexity processor. Designs using this MCU should verify every power rail, decoupling requirement, pin multiplexing option, boot configuration, clock source, and programming interface against the manufacturer datasheet before layout release. For BGA assembly, thermal vias, pad geometry, solder-mask design, and inspection requirements should be reviewed with the PCB assembly provider. STM32F072VBH7 availability and price should be checked directly with authorized distributors, as the supplied search data does not include numeric distributor pricing.

見積もり お問い合わせ
STM32F072VBT6 - 48MHz Cortex-M0 128KB MCU | STMicroelectronics
STM32F072VBT6

STM32F072VBT6 - 48MHz Cortex-M0 128KB MCU | STMicroelectronics

The STMicroelectronics STM32F072VBT6 is a 32-bit ARM Cortex-M0 microcontroller operating at up to 48 MHz, with 128 KB of Flash memory, 16 KB of SRAM, USB, CAN, and CEC connectivity, and a 2 V to 3.6 V operating-voltage range. It is housed in a 100-pin LQFP package measuring 14 mm by 14 mm. What is a microcontroller? A microcontroller, or MCU, integrates a processor core, nonvolatile program memory, volatile data memory, peripherals, and power-management functions into one semiconductor device. The STM32F0 MCU family belongs to the embedded-processor hierarchy and combines an Arm Cortex-M0 RISC core with GPIO, timers, serial interfaces, analog functions, communications peripherals, and debugging support. This integration allows a controller to execute firmware, acquire inputs, control outputs, and manage connected equipment without a separate external processor. Key features of the STM32F072VBT6 include its 48 MHz maximum operating frequency, 128 KB Flash, 16 KB SRAM, integrated USB and CAN interfaces, and 100-LQFP packaging. The MCU is identified by DigiKey as an STM32F0 series device with a 32-bit Arm Cortex-M0 core. Mouser identifies the same family position as a mainstream Arm Cortex-M0 USB-line MCU with 128 KB Flash, 48 MHz CPU, USB, and CAN connectivity. The STM32F0 architecture is intended for embedded control tasks that require deterministic peripheral access and broad I/O capability in a relatively large package. Its 100-pin LQFP format provides more externally accessible pins than smaller packages, making it useful when a design requires numerous GPIO, communication, timer, or analog-control connections. The verified distributor results specifically identify 128 KB Flash, 16 KB SRAM, 48 MHz operation, 2 V to 3.6 V operation, and USB/CAN features; other detailed electrical and peripheral limits are not provided in the supplied source text. Typical uses include USB-connected embedded controls, CAN-connected industrial or consumer equipment, data-acquisition systems, compact control boards, and products requiring a larger pin count. A design should allocate the MCU supply and ground pins correctly, configure the 2 V to 3.6 V operating environment, and route USB, CAN, and other high-speed or noisy signals according to the manufacturer’s complete datasheet and reference guidance. The main engineering benefit is integration: USB, CAN, Cortex-M0 processing, 128 KB Flash, and 16 KB SRAM are available in one 100-LQFP device, reducing the number of external components. The tradeoff is that the 14 mm by 14 mm package is larger than common 48-pin or 64-pin MCUs, so board area and routing complexity must be considered in compact products. This page consolidates verified distributor specifications, pricing observations, package information, application guidance, and selection considerations. It distinguishes verified values from parameters that require confirmation from the manufacturer datasheet, helping engineers plan sourcing and hardware design without treating unprovided specifications as guaranteed facts.

見積もり お問い合わせ
STM32F072VBT6TR - 48MHz Cortex-M0 128KB MCU | STMicroelectronics (Tape & Reel)
STM32F072VBT6TR

STM32F072VBT6TR - 48MHz Cortex-M0 128KB MCU | STMicroelectronics (Tape & Reel)

The STMicroelectronics STM32F072VBT6TR is a 32-bit ARM Cortex-M0 microcontroller operating at up to 48 MHz, with 128 KB of Flash memory, 16 KB of SRAM, USB, CAN, and CEC connectivity, and a 2 V to 3.6 V operating-voltage range. It is housed in a 100-pin LQFP package measuring 14 mm by 14 mm. What is a microcontroller? A microcontroller, or MCU, integrates a processor core, nonvolatile program memory, volatile data memory, peripherals, and power-management functions into one semiconductor device. The STM32F0 MCU family belongs to the embedded-processor hierarchy and combines an Arm Cortex-M0 RISC core with GPIO, timers, serial interfaces, analog functions, communications peripherals, and debugging support. This integration allows a controller to execute firmware, acquire inputs, control outputs, and manage connected equipment without a separate external processor. Key features of the STM32F072VBT6TR include its 48 MHz maximum operating frequency, 128 KB Flash, 16 KB SRAM, integrated USB and CAN interfaces, and 100-LQFP packaging. The MCU is identified by DigiKey as an STM32F0 series device with a 32-bit Arm Cortex-M0 core. Mouser identifies the same family position as a mainstream Arm Cortex-M0 USB-line MCU with 128 KB Flash, 48 MHz CPU, USB, and CAN connectivity. The STM32F0 architecture is intended for embedded control tasks that require deterministic peripheral access and broad I/O capability in a relatively large package. Its 100-pin LQFP format provides more externally accessible pins than smaller packages, making it useful when a design requires numerous GPIO, communication, timer, or analog-control connections. The verified distributor results specifically identify 128 KB Flash, 16 KB SRAM, 48 MHz operation, 2 V to 3.6 V operation, and USB/CAN features; other detailed electrical and peripheral limits are not provided in the supplied source text. Typical uses include USB-connected embedded controls, CAN-connected industrial or consumer equipment, data-acquisition systems, compact control boards, and products requiring a larger pin count. A design should allocate the MCU supply and ground pins correctly, configure the 2 V to 3.6 V operating environment, and route USB, CAN, and other high-speed or noisy signals according to the manufacturer’s complete datasheet and reference guidance. The main engineering benefit is integration: USB, CAN, Cortex-M0 processing, 128 KB Flash, and 16 KB SRAM are available in one 100-LQFP device, reducing the number of external components. The tradeoff is that the 14 mm by 14 mm package is larger than common 48-pin or 64-pin MCUs, so board area and routing complexity must be considered in compact products. This page consolidates verified distributor specifications, pricing observations, package information, application guidance, and selection considerations. It distinguishes verified values from parameters that require confirmation from the manufacturer datasheet, helping engineers plan sourcing and hardware design without treating unprovided specifications as guaranteed facts.

見積もり お問い合わせ
STM32F091CBT6 - 48MHz 128KB MCU | STMicroelectronics
STM32F091CBT6

STM32F091CBT6 - 48MHz 128KB MCU | STMicroelectronics

STMicroelectronics STM32F091CBT6 is an ARM Cortex-M0 32-bit RISC microcontroller operating up to 48 MHz, with 128 KB of Flash memory, 32 KB of SRAM, and a 48-pin LQFP package measuring 7 x 7 mm. It operates from a 2.0 V to 3.6 V supply and is positioned for cost-sensitive embedded applications requiring CAN communication, analog conversion, timers, and multiple serial interfaces. A microcontroller is a programmable semiconductor that combines a processor core, memory, and peripherals in one device. The STM32F091CBT6 belongs to the STM32F0 access-line family, where Cortex-M0 provides a compact instruction set for control-oriented embedded products. This hierarchy places the device among general-purpose microcontrollers, embedded processors, and semiconductor components used to monitor sensors, operate actuators, and manage communication links. Key device features include an ARM Cortex-M0 core operating at up to 48 MHz, 128 KB of Flash, 32 KB of SRAM with hardware parity, a hardware CRC calculation unit, and a 2.0 V to 3.6 V operating range. The STM32F091 series also incorporates CAN capability, 12 timers, ADC, DAC, and communication interfaces, making it suitable for compact industrial controls and connected peripherals. The architecture uses a 32-bit RISC core with integrated high-speed embedded Flash and SRAM. Hardware CRC supports reliable data integrity checks, while the timer, analog, and communications resources reduce the need for external companion ICs. In a typical design, firmware executes from Flash, static data resides in SRAM, and the integrated peripherals handle sensing, timing, communications, and control functions under a common clock and power-management framework. Typical uses include industrial sensor nodes, CAN-connected motor and equipment controllers, compact instrumentation, access-control terminals, and communication equipment. The 48 MHz core supports responsive control loops, while CAN enables deterministic communication between distributed nodes. The LQFP package also provides accessible leads for inspection, rework, and lower-cost automated assembly. Designers should verify pin multiplexing, peripheral instance availability, clock requirements, and the selected Flash-memory and SRAM allocation against the STM32F091CB technical documentation. Because the device provides numerous alternate-function assignments, one physical pin can serve several purposes depending on the firmware configuration. Decoupling, reset, boot, and programming connections should follow the manufacturer reference circuit. This product page consolidates the principal electrical characteristics, application guidance, drop-in comparison options, and practical PCB considerations. Its value is not limited to basic identification: it helps engineers connect the exact memory, core, package, voltage, and interface capabilities to an appropriate embedded-system design.

見積もり お問い合わせ