STM32F072V8T6 - 48MHz 64KB Cortex-M0 MCU | STMicroelectronics
部品番号: STM32F072V8T6 ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $2.7757 | $2.78 |
| 10 | $2.7757 | $27.76 |
| 100 | $2.7757 | $277.57 |
| 500 | $2.7757 | $1,387.85 |
| 1,000 | $2.7757 | $2,775.70 |
STM32F072V8T6 概要
What is an STM32F0-series microcontroller? It is a 32-bit embedded microcontroller, a category of microcontroller and semiconductor device used to monitor sensors, operate actuators, process data, and control communication interfaces. The STM32F072V8T6 belongs to the STM32 family hierarchy: STM32F072V8T6 > STM32F0 series > STM32 family > ARM Cortex-M0 microcontroller > embedded processor > semiconductor. Its combination of USB and CAN connectivity is useful for industrial control, USB peripherals, automotive-style communication subsystems, and compact consumer equipment.
Key verified features include a 32-bit ARM Cortex-M0 core, a maximum 48 MHz operating frequency, 64 KB Flash, and 16 KB SRAM. The listed package is 100-LQFP, 14 x 14 mm, providing a larger pin count than lower-density STM32 packages and exposing more GPIO and peripheral options. The device is identified by distributor sources as a USB-line MCU with USB, CAN, and communication interfaces. The verified Mouser listing specifically identifies the part as an ARM Cortex-M0 USB-line MCU with 64 KB Flash, USB, and CAN.
The STM32F072V8T6 architecture combines a compact general-purpose core with dedicated peripherals for analog measurement, timing, communications, and control. USB and CAN support can reduce the need for separate interface devices in connected embedded systems. The 100-LQFP package is useful when a design requires more externally accessible pins than smaller packages provide, while its 14 x 14 mm footprint remains compact compared with many higher-pin-count packages. The exact ADC, DAC, timer, voltage, and pin-level parameters are not present in the supplied verified snippets, so those values are marked as data needed rather than inferred.
Typical applications include USB-connected data acquisition, industrial sensor controllers, CAN-based equipment, motor and actuator control, embedded gateways, and compact automation products. For USB applications, the MCU can manage device communication alongside timers and analog functions. For CAN-based systems, it can combine network communication with local control and data processing. Compared with a simpler microcontroller, its USB and CAN integration can reduce component count, although firmware, peripheral configuration, and device-specific validation remain necessary.
The primary design consideration is package planning. A 100-LQFP footprint is not interchangeable with smaller STM32 packages without a PCB redesign, so power, ground, decoupling, signal-routing, and programming access must be planned against the verified 100-pin package. Firmware should also be validated against the exact STM32F072V8T6 datasheet, especially for pin multiplexing, peripheral electrical limits, clock configuration, and USB/CAN timing. Pricing shown in the verified LCSC result is $2.7757 as of 2026-10-22; distributor availability and prices can change.
This product data page combines the verified manufacturer and distributor identity, 48 MHz Cortex-M0 positioning, 64 KB Flash, 16 KB SRAM, USB, CAN, and the 100-LQFP package with practical sourcing and design context. It does not infer unreported electrical limits or claim a substitute part unless the supplied cross-reference evidence establishes same-package compatibility.
ドロップイン代替品: STM32F072V8T6 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: STM32F072V8T6 （同一形状・フットプリント） — 相違点: Architecture, Core, Flash Memory, Package, Product Type.
クイック比較ツール — 並列比較する代替部品を選択:
STM32F071V8T7
✅ ドロップイン📋 参考代替品（カタログ未掲載）
STM32F071V8T6
✅ ドロップイン📋 参考代替品（カタログ未掲載）
STM32F072V8T6 最大定格＆電気的特性
| Core | ARM Cortex-M0, 32-bit RISC |
| Maximum CPU Frequency | 48 MHz |
| Flash Memory | 64 KB |
| SRAM | 16 KB |
| Product Series | STM32F0 series |
| Product Type | USB-line microcontroller with USB and CAN |
| Architecture | 32-bit ARM Cortex-M0 embedded microcontroller |
| パッケージ | 100-LQFP, 14 x 14 mm |
| ピン数 | 100 pins |
| 実装タイプ | Surface Mount |
| USB Interface | USB |
| CAN Interface | CAN |
| Communication Interfaces | USB, CAN, and serial communication interfaces |
| ADC | Available according to the verified STM32F072 family description |
| DAC | Available according to the verified STM32F072 family description |
| Timers | Embedded timers |
STM32F072V8T6 100-lqfp, 14 x 14 mm ピン配置ガイド
STM32F072V8T6 (100-lqfp, 14 x 14 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: STM32F072V8T6.
詳細は データシート をご参照ください。
主な用途
STM32F072V8T6 の用途: 6 件s: USB Connected Data Acquisition, CAN-Based Industrial Controller, Industrial Sensor Hub, Motor and Actuator Control, USB-to-CAN Embedded Gateway, Compact Automation Controller.
USB Connected Data Acquisition
The STM32F072V8T6 fits USB-connected measurement systems because it combines a 48 MHz ARM Cortex-M0 core with 64 KB Flash, 16 KB SRAM, USB, and embedded analog and timer resources. It can sample sensors, format data, and present a USB device interface without requiring a separate USB controller. The 100-LQFP package provides 100 externally accessible pins, which is useful when the design needs numerous GPIO, debug, control, or peripheral connections. Firmware should confirm USB clock requirements, endpoint configuration, power states, and device enumeration behavior against the manufacturer datasheet. Because the verified results do not provide exact ADC or USB timing values, those details must be validated before production release.
おすすめ
CAN-Based Industrial Controller
STM32F072V8T6 is suitable for compact CAN-connected control equipment because the verified Mouser listing identifies both USB and CAN, while the 48 MHz Cortex-M0 core provides control-processing capability and the 100-LQFP package exposes a broad pin set. A controller can receive commands over CAN, execute timing or state-machine logic, and report status over USB or CAN diagnostics. Design work should verify transceiver requirements, bus termination, isolation, fault handling, and peripheral clock configuration. The verified data confirms CAN capability but does not specify the exact CAN version, transceiver pins, or electrical limits, so those values remain subject to datasheet verification.
おすすめ
Industrial Sensor Hub
The STM32F072V8T6 can act as a central controller in an industrial sensor hub where several inputs are sampled, conditioned, timestamped, and forwarded over USB or CAN. Its 16 KB SRAM supports protocol buffers and working state, while 64 KB Flash provides room for application firmware and configuration. The 100-LQFP package is helpful when the system needs numerous GPIO and communication connections in a compact 14 x 14 mm body. Engineers should verify the exact ADC resolution, conversion timing, input impedance, DAC availability, and operating-temperature range from the complete manufacturer documentation rather than relying on the distributor snippets.
おすすめ
Motor and Actuator Control
STM32F072V8T6 is appropriate for basic motor, relay, and actuator-control platforms because its 48 MHz Cortex-M0 core can execute deterministic control logic while USB and CAN provide monitoring or command links. The 100-LQFP package offers more pins than compact low-pin-count MCUs, which can simplify routing of PWM outputs, feedback inputs, fault signals, and communication interfaces. A practical design must still confirm timer channel assignments, pin alternate functions, maximum GPIO current, supply voltage, and thermal conditions using the official datasheet. STM32F072V8T6 is therefore a suitable controller platform, not a substitute for a dedicated motor-driver IC.
おすすめ
USB-to-CAN Embedded Gateway
STM32F072V8T6 can serve as the protocol-processing core in a compact embedded gateway that accepts USB host commands and exchanges data with CAN-connected equipment. The verified product identity explicitly includes USB and CAN, making it a logical fit for bridging PC configuration software with an industrial network. Its 64 KB Flash and 16 KB SRAM should be assessed against protocol stack, logging, security, and update requirements. Firmware architecture should include timeout handling, bus-off recovery, firmware update policy, and fault containment. Exact peripheral mapping, USB electrical requirements, and CAN timing must be verified from the manufacturer documentation.
おすすめ
Compact Automation Controller
The STM32F072V8T6 is useful in compact automation controllers that coordinate digital I/O, timing functions, communications, and local decisions. Its 32-bit Cortex-M0 architecture operates up to 48 MHz, while the STM32F0 family context supports a familiar embedded development ecosystem. The 100-LQFP footprint provides routing flexibility for power, ground, communications, and control signals in a 14 x 14 mm package. Before selecting it for a new controller, validate startup behavior, I/O levels, watchdog strategy, brownout behavior, peripheral availability, and environmental requirements. The verified snippets do not provide all of those limits, so a datasheet-based sign-off remains necessary.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: STM32F072V8T6 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | STM32F071V8T7 | STM32F071V8T6 |
|---|---|---|---|
| Package | 100-LQFP, 14 x 14 mm | 100-LQFP | 100-LQFP |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics |
主な差別化要因
- Integrated USB and CAN connectivity （vs STM32F071V8T7)
- 64 KB Flash and 16 KB SRAM positioning （vs STM32F071V8T6)
- 100-LQFP package with 14 x 14 mm body （vs STM32F071V8T7)
設計ノート
Design the 100-LQFP footprint against the manufacturer package drawing rather than a generic LQFP footprint. Confirm pad length, width, pitch, pin numbering, exposed thermal considerations, and solder-mask clearance. Because the verified data confirms a 14 x 14 mm 100-pin package but does not provide the full pin table, do not assign USB, CAN, timers, or debug functions until the official pinout is checked.
Plan the power tree early because USB, CAN, analog peripherals, and digital I/O may share the MCU supply domain. Follow the manufacturer recommended decoupling values and supply sequencing requirements from the datasheet. The supplied verified results do not include operating-voltage limits, absolute maximum ratings, or regulator recommendations, so these values must be obtained from the official documentation before schematic sign-off.
Do not substitute a smaller STM32 package or a related STM32F0 MPN solely because the core or memory family is similar. USB and CAN capabilities, pin multiplexing, clocking, memory size, and package pinout can differ materially. For any proposed replacement, compare the official datasheets and validate the PCB footprint, firmware target, boot behavior, and peripheral mapping before production release.
コンプライアンス情報
The supplied verified snippets identify the manufacturer, electrical identity, package, interfaces, and distributor availability, but do not provide verified RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements. Compliance fields are therefore left unknown.
