集積回路

サブカテゴリ

📁 ADC/DAC 3,100+ 製品 📁 アンプIC 1,900+ 製品 📁 オーディオコーデック 18 製品 📁 オーディオIC 2 製品 📁 クロック＆タイミング 670+ 製品 📁 Comparator ICs 1 製品 📁 DSP 1,100+ 製品 📁 データ収集IC 2 製品 📁 デジタルポテンショメータ 4 製品 📁 ディスプレイドライバ＆コントローラ 1 製品 📁 FPGA & CPLD 7,300+ 製品 📁 インターフェースIC 3,400+ 製品 📁 LEDドライバ 1 製品 📁 ロジックIC 460+ 製品 📁 メモリIC 870+ 製品 📁 マイクロコントローラ 20,000+ 製品 📁 マイクロプロセッサ 4 製品 📁 モータドライバ 1 製品 📁 その他 1 製品 📁 Sensor and Detector Interfaces 1 製品 📁 専用IC 15 製品 📁 ビデオIC 14 製品

製品 (39,000+)

EPM7160SLC84-6 - MAX 7000S CPLD 160 Macro 6ns 84-PLCC | Intel
EPM7160SLC84-6

EPM7160SLC84-6 - MAX 7000S CPLD 160 Macro 6ns 84-PLCC | Intel

The Intel (formerly Altera) EPM7160SLC84-6 is a high-performance, EEPROM-based Complex Programmable Logic Device (CPLD) from the MAX 7000S family, featuring 160 macrocells, 3.2K usable gates, 64 user I/O pins, and a 6 ns pin-to-pin logic delay, housed in an 84-pin Plastic Leaded Chip Carrier (PLCC) package. It operates from a single 5.0 V supply (4.75 V to 5.25 V) and supports 5.0 V in-system programmability (ISP) through the built-in IEEE Std. 1149.1 JTAG interface. A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic device that combines multiple PAL/GAL-style macrocell arrays with a central interconnect matrix. CPLDs sit in the programmable logic hierarchy between simple SPLDs and higher-density FPGAs, offering deterministic timing, instant-on configuration from on-chip EEPROM, and superior pin-to-pin delay consistency. The MAX 7000S family specifically targets glue-logic, bus interfacing, and state-machine applications where predictable timing matters more than raw gate count. Key features include 4 Logic Array Blocks (LABs) of 16 macrocells each, 36 usable I/O pins with MultiVolt I/O supporting mixed-voltage interfacing, and a 149.3 MHz internal counter frequency. The device is built on a CMOS EEPROM process, providing reprogrammability without external configuration memory. The -6 speed grade denotes the 6 ns tPD timing bin, the fastest standard speed grade offered in the MAX 7000S family for the EPM7160 density tier. The EPM7160SLC84-6 uses a second-generation MAX architecture with a programmable interconnect array (PIA) that routes signals between LABs. Every macrocell contains a programmable flip-flop, product-term logic, and a configurable I/O control block. JTAG boundary-scan test (BST) circuitry conforms to IEEE 1149.1, enabling board-level test access without bed-of-nails fixtures. The on-chip EEPROM cells retain configuration indefinitely without a battery. Typical applications include bus-interface bridging (PCI, ISA, VME), peripheral glue logic in microcontroller and microprocessor systems, state-machine controllers, address decoding and wait-state generation, and 5 V logic integration in industrial control and legacy computing equipment. The deterministic timing also suits telecommunications backplane glue, motor-control sequencing, and military/aerospace subsystems requiring instant-on behavior. When designing with this device, plan for 5 V-tolerant inputs with MultiVolt outputs and note that JTAG programming requires a 1149.1-compliant header. The 84-PLCC package is socket-friendly for prototyping and field upgrades, but engineers should evaluate the newer MAX II or MAX V families for new designs, since MAX 7000S is an older legacy family. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not found in the original 1998-vintage datasheet, providing an engineer-ready reference for sourcing decisions on legacy Altera/Intel CPLD designs.

見積もり お問い合わせ
EPM7160SLI84-10 - MAX 7000S CPLD, 160 Macrocells, 84-PLCC | Intel
EPM7160SLI84-10

EPM7160SLI84-10 - MAX 7000S CPLD, 160 Macrocells, 84-PLCC | Intel

The Intel (formerly Altera) EPM7160SLI84-10 is a high-performance Complex Programmable Logic Device (CPLD) from the MAX 7000S family, integrating 3,200 usable gates and 160 macrocells in an 84-pin Plastic Leaded Chip Carrier (PLCC) package. It is built on a 5.0-V CMOS process and offers a 10 ns pin-to-pin propagation delay with an internal counter frequency up to 167 MHz. What is a CPLD? A Complex Programmable Logic Device is a non-volatile programmable logic IC that sits between simple PLDs/gate arrays and full FPGAs in the programmable logic hierarchy. CPLDs provide fast, deterministic input-to-output combinational and registered logic, instant-on behavior from on-chip EEPROM configuration memory, and typically tens to hundreds of macrocells organized into Logic Array Blocks (LABs). The MAX 7000S family from Intel/Altera represents a second-generation MAX architecture widely used for address decoding, glue logic, bus interfacing, and state-machine control in 5V systems. Key features of the EPM7160SLI84-10 include 64 user I/O pins, MultiVolt I/O support for interfacing with 2.5V/3.3V/5V systems, in-system programmability via IEEE Std. 1149.1 (JTAG) interface, programmable speed/power optimization per macrocell, and 5.0-V ISP through dedicated JTAG pins. The device operates over a commercial 0C to +70C temperature range. Architecturally, the EPM7160SLI84-10 implements 160 macrocells grouped into Logic Array Blocks (LABs), each containing 16 macrocells with a shared programmable interconnect array (PIA). The EEPROM-based configuration cell enables instant-on operation at power-up with no external boot PROM, a key advantage over SRAM-based FPGAs in industrial control applications. The 10 ns tpd supports high-speed bus decoding at frequencies approaching 100 MHz. Typical applications include 5V TTL/CMOS bus decoding and address mapping, peripheral glue logic in microprocessorbased systems, state-machine controllers for industrial automation, JTAG-programmed prototype logic, and I/O expansion for legacy industrial controllers. The 84-PLCC package provides robust through-hole or socket-mounting for harsh industrial environments. Designers should note that the EPM7160SLI84-10 is in the MAX 7000S family (commercial temperature grade); for industrial-temperature applications requiring 40C to +85C, the EPM7160SRI84-10 variant must be selected. The 'S' suffix indicates the enhanced MAX 7000S series with MultiVolt I/O and ISP; the 'L' denotes low-power architecture. This page aggregates distributor pricing, pin-compatible MAX 7000S alternatives, and design guidance not consolidated in the original 1998-vintage datasheet, supporting both legacy maintenance and new 5V-system designs.

見積もり お問い合わせ
EPM7160SQC160-10 - MAX 7000S CPLD, 160 Macro Cells, 100MHz, PQFP-160 | Intel / Altera
EPM7160SQC160-10

EPM7160SQC160-10 - MAX 7000S CPLD, 160 Macro Cells, 100MHz, PQFP-160 | Intel / Altera

The Intel / Altera EPM7160SQC160-10 is a high-density, EEPROM-based Complex Programmable Logic Device (CPLD) from the MAX 7000S family, featuring 160 macro cells, 3,200 usable gates, and 104 user I/O pins housed in a 160-pin PQFP package. It supports in-system programmability (ISP) via a 5.0V JTAG-compatible interface and is built on Altera's second-generation MAX architecture with CMOS technology. A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic device that combines multiple PAL/GAL-like logic blocks with a programmable interconnect matrix, sitting in the broader taxonomy of programmable logic -> logic devices -> digital ICs -> semiconductors. CPLDs are valued for deterministic pin-to-pin propagation delay (typically 5-10 ns), instant-on configuration from non-volatile EEPROM, and the ability to replace dozens of discrete 74-series glue-logic chips on a board. Key features of the EPM7160SQC160-10 include 160 macro cells organized in 10 Logic Array Blocks (LABs), a 100 MHz internal operating frequency, 6 ns pin-to-pin propagation delay (tPD), and 5.0V in-system programmability through the IEEE 1149.1 (JTAG) boundary-scan interface. The 104 user I/Os support 5V tolerant inputs with 3.3V or 5V output options, and the device offers programmable power-saving modes that reduce standby current. The MAX 7000S architecture uses an EEPROM cell array that holds configuration even when power is removed, eliminating the need for external boot PROMs. Each macro cell contains a programmable AND/OR array and a configurable flip-flop, allowing designers to implement both combinatorial and registered logic at deterministic timing. The interconnect is a continuous, fast path between LABs, with predictable propagation delay that simplifies static-timing closure. Typical applications include bus-interface glue logic for microprocessor and DSP systems, peripheral controllers in industrial automation, state-machine implementation in legacy 5V designs, and address decoding for memory subsystems. The wide 5V I/O tolerance makes the part especially useful as a bridge between modern 3.3V controllers and legacy 5V peripherals. When designing with this device, observe that propagation delay is specified at 10 ns (the "-10" speed grade) and that supply voltage is 5V; substituting it into a 3.3V-only board will not function. The JTAG chain must be designed to allow ISP re-programming without removing the part from the board, and unused I/O pins should be left floating or terminated per the datasheet to minimize quiescent current. This page synthesizes distributor pricing, drop-in alternative CPLDs in the same PQFP-160 footprint, and practical design notes not found in the manufacturer datasheet, providing a single engineering reference for sourcing, replacement, and circuit integration decisions.

見積もり お問い合わせ
EPM7160SQC160-10N - 160 Macrocells MAX 7000S CPLD, 10ns, PQFP-160
EPM7160SQC160-10N

EPM7160SQC160-10N - 160 Macrocells MAX 7000S CPLD, 10ns, PQFP-160

The Intel (formerly Altera) EPM7160SQC160-10N is a high-density, EEPROM-based Complex Programmable Logic Device (CPLD) from the MAX 7000S family, offering 160 macrocells, 3,200 usable gates, and a 10 ns pin-to-pin delay in a 160-pin PQFP (Plastic Quad Flat Pack) package. It features an internal counter frequency of up to 167 MHz and 104 user I/O pins, making it suitable for high-performance glue-logic, bus interfacing, and state-machine applications in industrial and legacy systems. A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic device that combines multiple PAL-like macrocell arrays on a single chip with a programmable interconnect matrix. Positioned in the taxonomy as programmable logic -> PLD -> CPLD -> MAX 7000S family, the EPM7160SQC160-10N sits between simple PAL/GAL devices and larger FPGAs, offering instant-on EEPROM technology, deterministic timing, and 5V tolerant I/O. The MAX 7000S series uses Altera's second-generation MAX architecture with the Classic IEEE Std 1149.1 JTAG interface for in-system programming (ISP). Key features include 3,200 usable gates, 160 macrocells, 10 ns tPD (pin-to-pin delay), 167 MHz maximum internal frequency, 5.0V VCCINT, in-system programmability via JTAG, and open-drain / programmable I/O standards. The architecture provides four dedicated inputs per macrocell, a global clock network, and a programmable power-saving mode that reduces standby current by up to 50 percent when the device is idle. Typical applications include bus decoding and address mapping in 5V legacy systems, glue-logic replacement for multiple discrete TTL/CMOS gates, peripheral controllers (UART, FIFO, DMA), state machines for motor control front-ends, and I/O expansion in 8051/MCS-51 embedded designs. The 160-pin PQFP package provides ample I/O for wide data buses and parallel interfaces. This page synthesizes distributor pricing (as of 2026-09-13), drop-in MAX 7000S alternatives, and practical design notes for the EPM7160SQC160-10N that are not aggregated on any single manufacturer or distributor page.

見積もり お問い合わせ
EPM7160SQC160-6 - 160-Macrocell MAX 7000S CPLD, 6ns, PQFP-160 | Altera
EPM7160SQC160-6

EPM7160SQC160-6 - 160-Macrocell MAX 7000S CPLD, 6ns, PQFP-160 | Altera

The Altera (Intel) EPM7160SQC160-6 is a high-density, EEPROM-based, in-system programmable Complex Programmable Logic Device (CPLD) from the MAX 7000S family, delivering 160 macrocells, 3,200 usable gates, and 104 user I/Os in a 160-pin PQFP (Plastic Quad Flat Pack) package. The device operates from a 5 V supply (4.75 V to 5.25 V), provides a 6 ns pin-to-pin propagation delay, and supports a maximum internal frequency of 167 MHz, making it suitable for high-performance glue-logic, bus interfacing, and state-machine applications. A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic IC that combines multiple PAL/GAL-like macrocell blocks on a single die with a centralized interconnect matrix. Architecturally, a CPLD sits between small SPLDs/GALs and large FPGAs: it offers deterministic timing (fixed, predictable propagation delay), instant-on behavior (no external boot ROM required), and high-drive I/O cells optimized for bus bridging and I/O expansion. The MAX 7000S family is built on a second-generation MAX architecture using EEPROM configuration cells, which provides true in-system programmability (ISP) via JTAG. Key features of the EPM7160SQC160-6 include four dedicated input pins that operate as global clock, clear, output enable, and preset network signals; ten Logic Array Blocks (LABs) each containing 16 macrocells; programmable interconnect array (PIA) routing; user-programmable macrocell flip-flops with individually programmable clock, clear, preset, and enable controls; per-pin slew-rate control for EMI-sensitive designs; and a JTAG-compliant boundary-scan interface (IEEE Std 1149.1). The 5.0 V ISP allows designers to reconfigure the device on the board without removing the part. The EEPROM process technology gives the EPM7160SQC160-6 non-volatile configuration retention (no external configuration memory needed) and 100 program/erase cycles endurance. Each macrocell implements a sum-of-products logic expression with a programmable flip-flop that can be configured as D, T, JK, or SR. The interconnect architecture delivers fixed, deterministic timing paths with predictable setup/hold — an advantage over SRAM-based FPGAs in latency-sensitive control applications. Typical applications include 32-bit/16-bit peripheral bus interfacing (PCI, ISA, VME), address decoding and chip-select generation for microprocessors, glue logic between microcontrollers and memory devices, state-machine control for industrial automation, high-speed bus arbitration, and I/O expansion for legacy designs. The 6 ns propagation delay and 167 MHz internal frequency are sufficient for 50 MHz synchronous bus cycles with comfortable margin. When designing with the EPM7160SQC160-6, designers should note the 160-pin PQFP package is pin-compatible with other MAX 7000S members in the same package, which simplifies migration between 7128/7160/7192 densities. The 5 V supply simplifies interface to TTL/CMOS peripherals but limits use in modern 3.3 V-only systems without level translation. The device is specified for commercial temperature range (0°C to 70°C). This page synthesizes distributor pricing, drop-in alternatives from the same MAX 7000S family, and practical design notes that are not aggregated in the original Altera datasheet, helping engineers evaluate longevity, footprint compatibility, and migration paths.

見積もり お問い合わせ
EPM7160SQC160-7 - 160-Macrocell MAX 7000S CPLD, 7.5ns | Altera
EPM7160SQC160-7

EPM7160SQC160-7 - 160-Macrocell MAX 7000S CPLD, 7.5ns | Altera

The Altera EPM7160SQC160-7 is a 160-macrocell high-density CMOS Complex Programmable Logic Device (CPLD) from the MAX 7000S family, housed in a 160-pin Plastic Quad Flat Pack (PQFP/BQFP) surface-mount package and specified at the -7 speed grade with 7.5 ns maximum pin-to-pin propagation delay. The device integrates 3,200 usable system gates across 10 Logic Array Blocks (LABs) and 160 macrocells, each containing a programmable AND/OR array with 32 product terms, supporting fast and predictable combinational and registered logic implementation. The 'S' suffix indicates in-system programmability (ISP) through a built-in IEEE 1149.1 JTAG interface operating from a single 5.0 V supply (4.75 V to 5.25 V), which allows board-level reconfiguration without removing the device. A CPLD is a non-volatile programmable logic device that combines multiple PAL-like macrocells on a single chip with on-chip EEPROM configuration memory, providing instant-on behavior at power-up with no external boot PROM. The MAX 7000S architecture belongs to the broader programmable logic family, sitting between small SPLDs/GALs and larger FPGAs; it excels at glue-logic, bus interfacing, address decoding, and state-machine replacement where deterministic timing and 5 V tolerance are required. The part is commercial-grade (0 °C to 70 °C) and its output drivers can be configured for 3.3 V or 5.0 V operation, enabling mixed-voltage system designs. Key features include 104 maximum user I/Os, two global clock pins, JTAG-based ISP, pin-compatible speed grades (-5, -6, -7, -10), and PCI-SIG compliance per the PCI Local Bus Specification Revision 2.2. The high pin count makes it suitable for byte-wide bus bridging and address/data demultiplexing. The device is fully supported by Altera's legacy MAX+PLUS II and Quartus II design tools, with the latter providing modern Verilog/VHDL and schematic entry. Typical applications include PCI bus interface glue logic, peripheral controller glue logic between microprocessors and memory, address decoding and chip-select generation, bus-width translation between 5 V and 3.3 V domains, and replacement of multiple discrete 22V10 / GAL devices. The instant-on, non-volatile configuration also suits industrial control and instrumentation boards where deterministic boot behavior is required. When designing with this part, observe the I/O banking rules for 3.3 V versus 5.0 V outputs and provide adequate decoupling (one 0.1 µF per VCC/GND pair plus a bulk 10 µF). For JTAG ISP, ensure TMS, TDI, TDO, and TCK are routed with short traces and the TRST pin is handled per datasheet guidance. Choose the -6 or -10 speed grade if 7.5 ns is over-budget for the timing closure target.

見積もり お問い合わせ
EPM7160STC100-10 - MAX 7000S CPLD, 160 Macrocells, 100-pin TQFP | Intel
EPM7160STC100-10

EPM7160STC100-10 - MAX 7000S CPLD, 160 Macrocells, 100-pin TQFP | Intel

The Intel (formerly Altera) EPM7160STC100-10 is a high-density, high-performance EEPROM-based Complex Programmable Logic Device (CPLD) from the MAX 7000S family, featuring 160 macrocells, 84 user I/Os, and 3.2K usable gates in a 100-pin TQFP package with a 10 ns pin-to-pin propagation delay and 5.0 V operation. The device is fabricated in advanced CMOS technology and supports in-system programmability (ISP) through the IEEE Std. 1149.1 JTAG interface, allowing field upgrades without removing the part from the board. A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic device that combines multiple PAL/GAL-like macrocell arrays on a single chip with a programmable interconnect matrix. In the system hierarchy, a CPLD sits between simple SPLDs (PALs/GALs) and larger FPGAs, offering deterministic timing, instant-on behavior from non-volatile EEPROM, and typically lower I/O counts than FPGAs but higher logic density than 22V10-style GALs. The MAX 7000S family is Altera's second-generation MAX architecture, characterized by fast 5-10 ns propagation delays and pin-compatible upgrades within the family. Key features of the EPM7160STC100-10 include 160 macrocells organized in logic array blocks (LABs), 84 user I/Os, 3.2K usable gates, a 100 MHz internal counter frequency, and 5.0 V VCC operation. The -10 speed grade denotes a 10 ns maximum pin-to-pin delay (tPD1) and a 6 ns global clock setup time, suitable for glue-logic, bus-interface, and state-machine applications where deterministic timing is critical. The device also offers programmable power savings with 50% or 100% toggle-rate reduction modes, multi-voltage I/O support, and JTAG boundary-scan test compliance. Architecturally, the EPM7160STC100-10 uses an EEPROM cell to store the configuration, which means the device powers up instantly in a known state without external boot memory. Each macrocell contains a programmable AND/OR array, a product-term allocator, a flip-flop, and an I/O control block, providing both combinational and registered logic with flexible feedback paths. The interconnect uses Altera's FastTrack continuous interconnect matrix, minimizing routing delay variations across the chip. Typical applications include bus-interface bridging (e.g., 8-bit/16-bit MCU to 32-bit peripheral glue-logic), address decoding and chip-select generation in microprocessor systems, state-machine control for industrial automation, peripheral interface adaptation (UART, SPI, I2C, parallel buses), and legacy TTL/CMOS logic integration on a single programmable device. The instant-on EEPROM configuration also suits safety-critical and automotive underhood applications requiring deterministic power-up behavior. Designers should note that the EPM7160STC100-10 belongs to a mature, multi-decade product family; some speed grades and temperature grades have been migrated to the -10N suffix variant. For new designs, evaluate MAX II or MAX V CPLDs as modern equivalents, but for pin-compatible drop-in replacement on existing PCBs the EPM7160STC100-10N, EPM7160STC100-7, and EPM7160STC100-15 offer parametric-equivalent second sources within the same 100-pin TQFP footprint. This page synthesizes distributor pricing, JTAG/ISP programming parameters, and same-family drop-in alternatives not found in a single distributor listing, with values anchored to the manufacturer datasheet and DigiKey/Mouser inventory data as of 2026-09-13.

見積もり お問い合わせ
EPM7160STC100-10F - 160-Macrocell MAX 7000S CPLD, 10ns, TQFP-100
EPM7160STC100-10F

EPM7160STC100-10F - 160-Macrocell MAX 7000S CPLD, 10ns, TQFP-100

The Intel (formerly Altera) EPM7160STC100-10F is a high-density, high-performance Complex Programmable Logic Device (CPLD) from the MAX 7000S family, delivering 160 macrocells, 3,200 usable gates, and 100 MHz pin-to-pin performance in a 100-pin TQFP (1.0 mm height, lead-free) package with a 10 ns propagation delay. Built on a 5 V CMOS process, this non-volatile EEPROM-based device provides in-system programmability via IEEE Std. 1149.1 (JTAG) and supports the SameFrame pin-out migration strategy that allows multiple MAX 7000S densities to share a common PCB layout. A CPLD (Complex Programmable Logic Device) is a non-volatile, flash/EEPROM-backed programmable logic device that combines the deterministic timing of PAL/GAL architecture with higher logic density, multi-level macrocell arrays, and on-chip programmable interconnect. CPLDs sit between discrete logic ICs (74-series gates) and FPGAs in the programmable logic hierarchy: FPGAs offer higher density and richer features but require external boot memory and have unpredictable timing; CPLDs boot instantly from on-chip non-volatile memory and deliver predictable pin-to-pin delays of a few nanoseconds. The MAX 7000S family is the second-generation MAX architecture, optimized for 5 V system designs requiring glue logic, bus decoding, state-machine control, and high-speed interface bridging. Key features include 84 user I/O pins (5 V tolerant), four dedicated inputs, programmable power-saving mode per macrocell, programmable security bit for design protection, in-system programmability through the JTAG interface, and a multi-volt I/O interface that allows mixed-voltage operation with 5.0 V, 3.3 V, and 2.5 V devices on the same board. The 10 ns pin-to-pin delay translates to approximately 100 MHz system frequency on combinatorial paths, sufficient for fast state-machine and address-decoding tasks. Typical applications include bus-interface bridging (PCI, ISA, VME), address decoding and chip-select generation, high-speed glue logic replacement for 74-series TTL/CMOS gates, state-machine controllers, and 5 V industrial control systems that need non-volatile, instant-on programmable logic. The SameFrame pin-out enables migration across MAX 7000S variants (EPM7128S, EPM7160S, EPM7192S, EPM7256S) on the same 100-pin TQFP footprint, allowing designers to swap densities without PCB rework. When designing with this device, ensure the JTAG chain is correctly terminated with the TCK, TMS, TDI, and TDO pins accessible for ISP. Use Altera/Intel Quartus II (or legacy MAX+PLUS II) for design entry, fitting, and programming; the device supports both 4-pin JTAG and ByteBlaster programming modes. Verify that the 5 V supply is well-decoupled with 100 nF + 10 µF capacitors near the VCC pins. This page synthesizes distributor pricing, drop-in MAX 7000S SameFrame alternatives, and practical design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ
EPM7160STC100-10N - MAX 7000 CPLD, 160 Macrocells, TQFP-100 | Altera
EPM7160STC100-10N

EPM7160STC100-10N - MAX 7000 CPLD, 160 Macrocells, TQFP-100 | Altera

The Altera (now Intel) EPM7160STC100-10N is a member of the MAX 7000S family of high-density, high-performance CMOS EEPROM-based complex programmable logic devices (CPLDs), delivering 160 macrocells, 84 user I/Os, and a 10 ns pin-to-pin propagation delay in a 100-pin TQFP package. A CPLD (Complex Programmable Logic Device) is a non-volatile, reprogrammable digital integrated circuit that combines multiple PAL/GAL-like logic blocks on a single chip with a central interconnect matrix. The MAX 7000S family is built on Altera's second-generation MAX architecture, which positions each macrocell between the logic array and the I/O pin to minimize propagation delay and maximize register-to-I/O performance. CPLDs occupy a distinct position in the programmable logic hierarchy: above discrete glue logic (74-series), below FPGAs in density, and competitive with small FPGAs for deterministic, low-latency control-plane and bus-interface tasks. Key features of the EPM7160STC100-10N include 3.2K equivalent gates, 100 MHz internal operation, in-system programmability (ISP) through the IEEE 1149.1 JTAG interface, 5.0 V VCCIO compatibility with 3.3 V and 5.0 V systems, and MultiVolt I/O that allows mixed-voltage interfacing. The -10 speed grade denotes a 10 ns tPD maximum, suitable for 66 MHz PCI bus interfaces and high-speed glue-logic replacement. Per the verified chip-source summary, the device offers an internal frequency of 167 MHz and 64 user I/Os within a plastic LCC-84 footprint variant context; the -10N TQFP-100 variant aligns with the broader MAX 7000S pinout family. The architecture combines four Logic Array Blocks (LABs) connected through a Programmable Interconnect Array (PIA), with each macrocell containing a programmable AND/OR array, a flip-flop, and routing to global or local control signals. The EEPROM configuration cell is non-volatile, allowing instant-on behavior at power-up with no external boot PROM. ISP via JTAG enables field upgrades without removing the device from the board. Typical applications include PCI bus interface bridging, address decoding and glue-logic replacement, peripheral adapters, and 5 V/3.3 V mixed-voltage system controllers. The wide operating temperature (commercial 0C to 70C) and the legacy MAX 7000S family heritage make it a drop-in solution for industrial and embedded designs that have long service-life requirements. When designing with this part, route JTAG signals TMS, TCK, TDI, TDO through dedicated test access pins and provide a clean 5 V supply with adequate decoupling. Verify pin compatibility with the specific TQFP-100 footprint revision on your PCB before committing to layout, since the MAX 7000S family includes several die/package variants with different I/O counts and ball/pin assignments. This page synthesizes distributor pricing, drop-in alternatives, and design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ
EPM7160STC100-6N - 160-Macro MAX 7000S CPLD, 6ns TQFP-100 | Altera
EPM7160STC100-6N

EPM7160STC100-6N - 160-Macro MAX 7000S CPLD, 6ns TQFP-100 | Altera

The Altera (Intel) EPM7160STC100-6N is a high-performance, EEPROM-based Complex Programmable Logic Device (CPLD) from the MAX 7000S family, featuring 160 macro cells, 84 user I/Os, and a 6 ns pin-to-pin propagation delay. Housed in a 100-pin TQFP (T100) package, this device operates from a 5V supply and supports in-system programmability (ISP) through the IEEE 1149.1 JTAG interface. The '-6N' suffix denotes the commercial temperature grade (0°C to +70°C) and the 6 ns speed grade. A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic device that combines multiple PAL-like macro-cell arrays with a central interconnect matrix. CPLDs sit in the broader programmable logic hierarchy: CPLD -> PLD -> programmable logic -> digital semiconductor -> integrated circuit. Compared to FPGAs, CPLDs offer deterministic timing, instant-on from non-volatile EEPROM, and lower power consumption for glue-logic and control-plane applications, making them ideal for bus interfacing, state-machine decoding, and I/O expansion. The EPM7160STC100-6N delivers up to 149.3 MHz internal frequency and approximately 3,200 usable gates. Key features include 5.0V in-system programmability, JTAG boundary-scan support per IEEE Std 1149.1, programmable power management to reduce standby current, and a programmable macrocell flip-flop with clock-enable, clear, and preset controls. The TQFP-100 package exposes 84 usable I/O pins with 3.3V or 5V I/O capability. Built on a CMOS EEPROM process with second-generation MAX architecture, the device provides predictable timing with 4 ns global propagation delay and a fixed-pin architecture that simplifies PCB design. Multiple I/O banks support mixed-voltage interfacing, and the JTAG port enables post-assembly reconfiguration without removing the part from the board. Typical applications include bus-interface bridging (e.g., address decoding for legacy microcontrollers), peripheral glue logic, power-sequencer controllers, and interface translation between 5V and 3.3V logic domains. Industrial and consumer control boards commonly use this part for deterministic state-machine implementation. When designing with this part, allocate JTAG pins (TDI, TDO, TMS, TCK) early in the schematic, because reassigning them mid-layout complicates the JTAG chain. The device is non-volatile, so configuration loads instantly on power-up, eliminating the boot-time delay common to FPGAs. This page synthesizes distributor pricing, same-family drop-in alternatives, and JTAG layout guidance not found in the standalone datasheet.

見積もり お問い合わせ
EPM7160STI100-10 - MAX 7000S CPLD, 160 Macrocells, 100MHz | Altera
EPM7160STI100-10

EPM7160STI100-10 - MAX 7000S CPLD, 160 Macrocells, 100MHz | Altera

The Altera (Intel) EPM7160STI100-10 is a high-density, high-performance EEPROM-based Complex Programmable Logic Device (CPLD) from the MAX 7000S family, featuring 160 macrocells, 84 user I/Os, and a 10ns pin-to-pin propagation delay, housed in a 100-pin TQFP package with industrial temperature grade. A CPLD (Complex Programmable Logic Device) is a non-volatile, flash- or EEPROM-based programmable logic device that combines multiple PAL/GAL-like macrocell arrays with a central interconnect matrix. The MAX 7000S family is built on Altera's second-generation MAX architecture with 5.0V in-system programmability (ISP), pin compatibility with the original 5.0V MAX 7000S family, and PCI Local Bus Specification Revision 2.2 compliance for the -10 speed grade. CPLDs occupy the middle ground between simple SPLDs and high-density FPGAs, delivering deterministic timing, instant-on non-volatile configuration, and high I/O count at lower cost-per-logic-block. Key features include 3,200 usable gates, 160 macrocells, 84 user I/Os, 10ns tPD propagation delay, 100MHz maximum operating frequency, and an internal 4.75V to 5.25V supply with 5.0V-tolerant I/O. The device supports JTAG-based IEEE Std. 1149.1 boundary-scan testing and in-system programmability through the JTAG interface, eliminating the need for external programmers. The TQFP-100 surface-mount package provides a compact footprint for space-constrained designs, while the industrial -40C to +85C temperature range (denoted by the 'I' suffix) supports harsh-environment deployment. The EPM7160STI100-10 employs Altera's classic EEPROM cell technology, retaining configuration across power cycles without external boot memory. Its deterministic routing fabric and predictable 10ns delay make it suitable for glue logic, bus interface bridging, and state-machine implementation where timing predictability is critical. The 84 available I/Os support wide bus interfaces and parallel peripheral control. Typical applications include PCI bus interface logic, microprocessor peripheral glue logic, bus arbitration and address decoding, state-machine control in industrial automation, and high-density TTL/CMOS logic integration. The 5V core supply and 5V-tolerant I/Os align with legacy industrial and telecom infrastructure that has not yet migrated to 3.3V. When designing with this device, plan the JTAG chain with proper TCK/TMS/TDI/TDO pull-ups and ensure the VCCIO rail matches the connected logic level. Note that the -10 speed grade supports PCI 2.2 timing. This page synthesizes distributor pricing, drop-in MAX 7000S alternatives, and practical design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ
EPM7160STI100-10N - MAX 7000S CPLD, 160 Macrocells, 100MHz, TQFP-100 | Intel/Altera
EPM7160STI100-10N

EPM7160STI100-10N - MAX 7000S CPLD, 160 Macrocells, 100MHz, TQFP-100 | Intel/Altera

The Intel (formerly Altera) EPM7160STI100-10N is a high-density, high-performance EEPROM-based Complex Programmable Logic Device (CPLD) from the MAX 7000S family, packaged in a 100-pin TQFP and offering 160 macrocells, 84 user I/Os, and a 10 ns pin-to-pin propagation delay. Built on Altera's second-generation MAX architecture with 3.2K usable gates and 5.0V in-system programmability (ISP), this device targets glue-logic, interface bridging, and bus-decoding applications in industrial and commercial designs. A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic device that combines the instant-on characteristics of PAL/GAL architectures with the high integration density of FPGAs. Within the broader taxonomy, a CPLD is a sub-category of programmable logic devices (PLDs), sitting above discrete 22V10 GALs in density and below modern low-power FPGAs. The MAX 7000S family sits in Altera's classic mid-density CPLD portfolio and is widely used as the 'glue logic' layer between processors, memories, and peripherals in 5V-tolerant systems. Key differentiating features include a 5.0V core and I/O supply, 3.3V or 5V multi-voltage JTAG-based in-system programmability, 100 MHz internal performance, support for up to 84 user I/Os (some sources cite 104 I/Os for the TQFP-100 variant), and an industrial operating temperature range of -40C to +85C indicated by the 'I' suffix. The 'I' designator additionally implies lead-free assembly, an important differentiator versus the older non-I commercial variant. Architecturally, the EPM7160S pairs EEPROM configuration cells with a Logic Array Block (LAB) interconnect fabric, with macrocells combining programmable AND/OR arrays with configurable flip-flops. The MAX 7000S device supports JTAG-compliant IEEE 1149.1 boundary-scan testing, four user I/O pinout schemes via dedicated pin compatibility with other MAX 7000S density points, and a high-performance input path with a global clock network. Typical applications include address decoding and bus interface bridging in 5V microprocessor systems, peripheral glue-logic replacement for legacy 74-series TTL/CMOS logic, industrial control and instrumentation I/O expansion, power-supply sequencing logic, and JTAG-controlled in-system programmable front-ends. Designers frequently choose the EPM7160STI100-10N as a drop-in for end-of-life 22V10 and similar discrete PLD footprints. When designing with this part, pay particular attention to the 5.0V VCC requirement - the S-suffix variant uses 3.3V core, while the EPM7160S family generally operates at 5V - and ensure the JTAG chain respects IEEE 1149.1 ordering when multiple devices share the same boundary-scan test access port. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet, with all data sourced from DigiKey, Mouser, Octopart and Altera/Intel device documentation.

見積もり お問い合わせ
EPM7192EGC160-12 - 192-Macrocell MAX 7000 CPLD, 12ns, 160-PGA | Intel
EPM7192EGC160-12

EPM7192EGC160-12 - 192-Macrocell MAX 7000 CPLD, 12ns, 160-PGA | Intel

The Intel / Altera EPM7192EGC160-12 is a 192-macrocell, 124-I/O CMOS Complex Programmable Logic Device (CPLD) from the MAX 7000 family, housed in a 160-pin Ceramic Pin Grid Array (CPGA / PGA-160) package with a 12 ns pin-to-pin propagation delay and 5.0 V core supply. The 'E' suffix denotes the enhanced MAX 7000E architecture with in-system programmability (ISP) via the built-in IEEE Std. 1149.1 JTAG interface, and 'GC160' identifies the ceramic pin-grid-array package. What is a CPLD? A Complex Programmable Logic Device (CPLD) is a non-volatile, instantly-on programmable logic device built from multiple PAL-like logic array blocks (LABs) joined by a central interconnect matrix. CPLDs sit hierarchically above simple PLDs (PAL/GAL) and below FPGAs, offering deterministic timing, fast I/O, and instant-on behavior with no configuration memory load time. They are widely used as glue logic, bus interfaces, and state-machine controllers. Key features of the EPM7192EGC160-12 include 192 macrocells across 4 logic array blocks (LABs) with 3.75K usable gates, 124 user I/O pins, 12 ns tPD propagation delay, and a 76.9 MHz maximum operating frequency per the manufacturer datasheet. The device operates from a single 5.0 V supply (4.75 V to 5.25 V) and supports 5.0 V in-system programmability through the JTAG-compliant IEEE 1149.1 boundary-scan test (BST) interface. The MAX 7000 family supports PCI Local Bus Specification Revision 2.2 timing compatibility in -4 to -10 speed grades. The MAX 7000 architecture combines EEPROM configuration memory (non-volatile) with a classic product-term / macrocell structure, delivering zero standby power for the configuration and deterministic 12 ns combinational delay regardless of how the design routes through the interconnect. This makes the EPM7192EGC160-12 especially attractive for legacy industrial designs that need robust, repeatable timing rather than the absolute logic density of an FPGA. Typical applications include industrial glue logic and bus-interface bridging, telecom backplane control, PCI bus interface glue, address decoding and DMA control in legacy embedded systems, and motor-control I/O expansion. Designers also use the EPM7192E in production ASIC prototyping where instant-on, non-volatile behavior is required. A key design consideration is the 160-pin PGA footprint: although it shares a pin count with some MAX 7000 variants in PQFP packages, the ceramic PGA is socket-friendly and well-suited for legacy / through-hole backplane designs, but it requires a different PCB land pattern than the PQFP / TQFP / QFP variants of the same die. Designers migrating between package options should verify the footprint before reassigning the BOM. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet.

見積もり お問い合わせ
EPM7192EGI160-20 - 192-Macrocell CPLD, 20ns, 160-PGA | Intel
EPM7192EGI160-20

EPM7192EGI160-20 - 192-Macrocell CPLD, 20ns, 160-PGA | Intel

The Intel EPM7192EGI160-20 is a high-performance, EEPROM-based Complex Programmable Logic Device (CPLD) from the MAX 7000 family, delivering 192 macrocells organized into 4 Logic Array Blocks with a maximum pin-to-pin delay of 20 ns and a maximum operating frequency of approximately 62.5 MHz at 5 V, housed in a 160-pin Ceramic Pin Grid Array (CPGA) package with industrial temperature grade. A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic device that combines multiple PAL/GAL-style macrocell blocks on a single die, providing deterministic, interconnect-rich logic replacement for dozens of SSI/MSI chips. Within the broader taxonomy, the EPM7192EGI160-20 belongs to: CPLD -> programmable logic device -> logic IC -> integrated circuit. MAX 7000 devices use second-generation, EEPROM-based architecture that retains the bitstream when power is removed, eliminating the need for external boot PROMs and enabling in-system programmability via the IEEE Std. 1149.1 JTAG interface. Key features include 192 macrocells, 36 user I/O pins, 4 dedicated inputs, in-system programmability (ISP) through JTAG, and 5.0 V core operation. The device provides predictable timing with fixed propagation delays, multi-voltage I/O support for 3.3 V and 5 V interfaces, and a programmable power-saving mode that reduces individual macrocell power when logic is idle, while an enhanced security bit protects user designs from unauthorized read-back. The MAX 7000 architecture implements each macrocell as a product-term array feeding a programmable register, with a shared programmable interconnect array (PIA) routing signals between LABs. The EEPROM process technology allows unlimited reconfiguration cycles via JTAG, supporting field upgrades and rapid prototyping. The 4-LAB organization enables wide logic integration for state machines, address decoding, and bus-interface glue logic. Typical applications include bus-interface bridging, address decoding and wait-state generation, glue logic replacement around microprocessors and DSPs, peripheral control in industrial systems, and rapid prototyping of glue logic on 5 V legacy boards. The wide-gate count and JTAG ISP make it suitable for production designs that need flexibility without an FPGA. When designing with this part, observe 5 V supply tolerance on inputs and use level shifters for 3.3 V logic interfaces; the JTAG chain can remain populated during in-circuit test for board-level diagnostics. Decouple the VCC pins with 0.1 uF ceramic capacitors placed close to the package, and consult the manufacturer datasheet for the full PGA pin assignment. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design guidance not found on a single manufacturer datasheet page, giving engineers a single reference for sourcing and implementing the EPM7192EGI160-20.

見積もり お問い合わせ
EPM7192EGM160-15 - MAX 7000 CPLD, 192 Macrocells, PGA-160 | Altera
EPM7192EGM160-15

EPM7192EGM160-15 - MAX 7000 CPLD, 192 Macrocells, PGA-160 | Altera

The Altera (now Intel) EPM7192EGM160-15 is a high-density, high-performance CMOS EE PLD from the second-generation MAX 7000 family, providing 192 macrocells, 3750 usable gates, and 124 user I/O pins in a 160-pin PGA (Pin Grid Array) ceramic package. It operates with a 15 ns pin-to-pin logic delay and is supplied by a 5 V core with 3.3 V or 5 V configurable I/O banks for mixed-voltage interfacing. A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic device that combines multiple PAL/GAL-style macrocell arrays on a single die with a programmable interconnect fabric. CPLDs sit between simple SPLDs and FPGAs in the programmable logic hierarchy: they offer deterministic, instantly-on combinational and registered logic with hundreds to thousands of flip-flops, making them ideal for glue logic, bus interfacing, address decoding, and state-machine replacement. The MAX 7000 family is Altera's second-generation CPLD architecture and represents the industry's longest-shipped CPLD line. Key features of the EPM7192EGM160-15 include in-system programmability through Altera's ByteBlaster or BitBlaster interfaces via JTAG, 192 macrocells arranged in 12 Logic Array Blocks (LABs) of 16 macrocells each, four dedicated inputs per LAB, programmable interconnect with consistent delays, and per-macrocell registers configurable as D, T, JK, or SR flip-flops. Each macrocell offers configurable product-term allocation and a programmable power-saving mode. The device uses a 0.5 µm EEPROM-based process with 5 V tolerant I/O cells supporting 3.3 V PCI compliance when configured, and the ceramic PGA-160 package supports an industrial/military operating temperature range. The MAX architecture uses Altera's classic wired-AND AND-OR-INVERT (AOI) fabric with an expander product-term chain that efficiently implements wide gating functions. All MAX 7000E devices are 5 V core, 5 V tolerant I/O, and pin-compatible with the broader MAX 7000S family footprint in the same package option. Typical applications include address decoding for microprocessor/microcontroller systems, peripheral bus interfacing (ISA, PCI, VME), state-machine replacement in industrial control, glue logic for ASIC/FPGA-based designs, and high-reliability systems requiring non-volatile configuration. The ceramic PGA-160 package makes the EPM7192EGM160-15 particularly suited to military, aerospace, and industrial-temperature designs where plastic packages are not acceptable. When designing with this part, ensure 5 V ±5% supply regulation and provide proper JTAG chain termination. The PGA-160 ceramic socket should be specified for through-hole PCB assembly; SMD versions are available in the MAX 7000S QFP family if surface mount is required. This page synthesizes distributor stock, real-time pricing, MAX 7000 family alternatives, and practical CPLD design notes not found in a single source on the manufacturer datasheet.

見積もり お問い合わせ
EPM7192EGM160-20 - 192-Macrocell MAX 7000 CPLD, 20ns PGA-160 | Altera
EPM7192EGM160-20

EPM7192EGM160-20 - 192-Macrocell MAX 7000 CPLD, 20ns PGA-160 | Altera

The Altera (now Intel) EPM7192EGM160-20 is a 192-macrocell EE (electrically erasable) CMOS Complex Programmable Logic Device (CPLD) from the MAX 7000 family, fabricated on a second-generation MAX architecture and housed in a 160-pin PGA package with 120 user I/O lines. It delivers 600 to 5,000 usable gates, in-system programmability (ISP) via IEEE Std. 1149.1 JTAG, pin-to-pin propagation delays as fast as 5 ns, and counter frequencies up to 175.4 MHz. A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic device that combines multiple PAL/GAL-like macrocell arrays on a single chip with a programmable interconnect matrix. CPLDs sit in the programmable logic hierarchy between simple SPLDs (PALs/GALs) and high-density FPGAs, offering deterministic timing, instant-on behavior from on-chip EEPROM, and high drive capability - making them ideal for glue logic, bus interfacing, and state-machine replacement. As a member of the power-management-adjacent signal-conditioning category, the MAX 7000 family historically bridged discrete TTL logic and modern FPGAs in industrial, telecom, and military designs. Key features include 192 macrocells arranged in 12 Logic Array Blocks (LABs), 120 I/O pins with 3.3V/5V configurable I/O standards, two global clock inputs plus shared input/clock pins, programmable power saving per macrocell, and JTAG boundary-scan test per IEEE 1149.1. The -20 speed grade denotes a 20 ns pin-to-pin propagation delay. The EPM7192EGM160-20's electrically erasable EEPROM cell technology provides 100% tested 100 program/erase cycles and supports the JTAG-based In-System Programming (ISP) flow, eliminating the need for an external programmer. Combined with its industrial -40C to +125C operating range, the device targets long-lifecycle designs where design stability and reworkability matter more than absolute density. Typical applications include industrial control glue logic, telecom backplane bus interface bridging, legacy peripheral replacement for TTL/CMOS 74-series logic arrays, military and aerospace control electronics (under SMD 5962-93168), and JTAG-driven board-level test infrastructure. When designing with this part, ensure your ISP programming algorithm follows the MAX 7000 JTAG instruction set and that the global clock pins (GCLK1, GCLK2) and OE pins are assigned correctly to avoid contention. PGA-160 sockets are recommended over solder-mount to ease programming and rework. This page synthesizes distributor pricing across three channels, same-family drop-in alternates from the MAX 7000 family, and practical design notes for JTAG ISP not aggregated on the manufacturer datasheet.

見積もり お問い合わせ
EPM7192EQC160-20 - 192-Macrocell MAX 7000 CPLD, 20ns, PQFP-160 | Intel
EPM7192EQC160-20

EPM7192EQC160-20 - 192-Macrocell MAX 7000 CPLD, 20ns, PQFP-160 | Intel

The Intel (formerly Altera) EPM7192EQC160-20 is a 192-macrocell, 124-I/O EEPROM-based CPLD from the MAX 7000 family, housed in a 160-pin PQFP (28x28 mm) package with a 20 ns pin-to-pin propagation delay. It operates from a single 5.0 V supply (4.75 V to 5.25 V) and offers 5.0 V in-system programmability (ISP) through the built-in IEEE Std. 1149.1 JTAG interface. The device is organized as 4 Logic Array Blocks with 36 user I/O pins and supports JTAG boundary-scan testing per IEEE 1149.1. A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic device that combines multiple PAL-like macrocell arrays on a single chip, providing deterministic timing, instant-on operation, and high-drive I/O for glue-logic, bus-interface, and state-machine applications. In the broader system hierarchy, the EPM7192EQC160-20 sits between small FPGAs and discrete logic ICs, offering instant-on behavior (no boot PROM required), predictable timing for register-rich designs, and 5 V tolerant I/Os that are increasingly rare in modern logic families. Key features include 192 macrocells distributed across 4 Logic Array Blocks, 36 I/O pins routed through programmable interconnect, programmable power-saving mode per macrocell, programmable security bit for design protection, and JTAG-based ISP that allows board-level reconfiguration without removing the device. The 20 ns speed grade provides a 50 MHz fCNT internal counter frequency and supports combinatorial and registered logic at typical 5 V system clocks. Architecturally, the MAX 7000 family uses second-generation MAX architecture with EEPROM process technology, providing non-volatile configuration storage that retains state through power cycles. The Programmable Interconnect Array (PIA) routes signals between LABs and I/O pins with predictable delays that simplify static-timing closure versus SRAM-based FPGAs. Each macrocell contains a programmable AND/OR array plus a configurable flip-flop that can be bypassed for pure combinatorial outputs. Typical applications include industrial control glue-logic, 5 V system bus interfacing, JTAG-controlled I/O expansion, address decoding for legacy microprocessor boards, and pin-compatible replacement for older MAX 7000 designs where instant-on, non-volatile configuration is required. The wide 5 V tolerance makes it especially attractive for industrial 5 V designs where 3.3 V-only modern CPLDs are unsuitable. When designing with this part, note that the PQFP-160 package requires fine-pitch PCB layout with controlled-impedance traces; place decoupling capacitors (0.1 uF and 10 uF) as close as possible to each VCC/GND pair, and use a JTAG header that meets IEEE 1149.1 specifications for in-system programming access. Verify the JTAG chain length and TCK pull-up/down values against the JTAG specification for reliable ISP operation.

見積もり お問い合わせ
EPM7192SQC160-10 - 192-Macro MAX 7000S CPLD, 100MHz, PQFP-160 | Intel / Altera
EPM7192SQC160-10

EPM7192SQC160-10 - 192-Macro MAX 7000S CPLD, 100MHz, PQFP-160 | Intel / Altera

The Intel / Altera EPM7192SQC160-10 is a high-performance, EEPROM-based Complex Programmable Logic Device (CPLD) from the MAX 7000S family, providing 192 macrocells, 4 Logic Array Blocks (LABs), 124 user I/O pins, and a 10ns pin-to-pin propagation delay in a 160-pin Plastic Quad Flat Pack (PQFP) package. It delivers up to 100MHz in-system performance with 5.0V in-system programmability (ISP) through a built-in IEEE Std. 1149.1 JTAG interface. A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic device that combines multiple PAL-like macrocell blocks on a single chip, with deterministic timing and instant-on behavior. CPLDs sit in the broader programmable logic hierarchy between small SPLDs/galoS and large FPGAs, and are typically used for glue logic, bus interfacing, state machines, and I/O expansion where low latency, predictable timing, and instant-on non-volatile configuration are required. The EPM7192SQC160-10 supports approximately 3.75K usable gates and provides a multi-volt I/O interface (5.0V core, 5.0V-tolerant I/O in this 5V variant). It features four user I/O pins per macrocell group, programmable interconnect, and macrocell registers with individual clear, preset, clock, and clock-enable controls. The -10 speed grade denotes a 10ns tPD, allowing clock frequencies up to approximately 100MHz in synchronous designs. Architecturally, the MAX 7000S uses EEPROM cells for configuration, providing non-volatile storage that retains the design across power cycles without an external boot PROM. The second-generation MAX architecture includes enhanced interconnect, improved pin-locking, and the JTAG-based ISP capability, enabling in-circuit re-programmability for prototyping and field updates. Typical applications include bus-interface bridging (e.g., address decoding, bus arbitration), peripheral glue logic in microcontroller/DSP systems, I/O expansion and signal-level translation in industrial control boards, state machines and protocol conversion in legacy 5V designs, and PCI bus arbitration glue logic. When designing with this device, ensure the board layout keeps JTAG chain length short and that the 5V supply is well decoupled near the device. Note that the MAX 7000S family has been in mature production for many years and is supported primarily for legacy designs; new designs should consider MAX II, MAX V, or MAX 10 CPLDs from Intel. This page synthesizes distributor pricing, drop-in package-compatible alternatives, and practical design notes not found in the manufacturer datasheet alone, helping engineers evaluate supply-chain options and migration paths.

見積もり お問い合わせ
EPM7192SQC160-10N - 192-Macrocell MAX 7000S CPLD, 10ns, 160-Pin PQFP | Altera
EPM7192SQC160-10N

EPM7192SQC160-10N - 192-Macrocell MAX 7000S CPLD, 10ns, 160-Pin PQFP | Altera

The Altera EPM7192SQC160-10N is a high-performance, EEPROM-based Complex Programmable Logic Device (CPLD) from the MAX 7000S family, delivering 192 macrocells, 3,750 usable gates, and a 10 ns pin-to-pin logic delay in a 160-pin Plastic Quad Flat Pack (PQFP/BQFP) package. It supports 124 user I/O pins and operates from a 5.0 V core supply with 5.0 V in-system programmability (ISP) through the built-in IEEE Std. 1149.1 Joint Test Action Group (JTAG) interface. According to the manufacturer datasheet, the device is fabricated on a 0.30 µm CMOS EEPROM process and supports system frequencies up to 100 MHz. A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic device that combines multiple PAL-like macrocell blocks interconnected by a programmable switch matrix. Within the broader semiconductor taxonomy, a CPLD sits between simple SPLDs (e.g., PAL/GAL) and FPGAs, offering deterministic timing, instant-on configuration from on-chip EEPROM, and high fan-in logic — making it ideal for glue logic, bus decoding, and interface bridging. The MAX 7000S series specifically adds in-system programmability via JTAG, enabling field upgrades without removing the device from the board. Key differentiating features of the EPM7192SQC160-10N include its 12 Logic Array Blocks (LABs) of 16 macrocells each, a programmable speed/power optimization mode that lets speed-critical portions of a design run at full speed while other portions run at 50% lower power with only a nominal timing penalty, and four dedicated global clock inputs. Each macrocell contains a programmable AND/OR/flip-flop array with configurable clear, preset, and clock modes. The device supports multiple I/O standards including 5.0 V CMOS and 3.3 V PCI-compatible signaling through its JTAG-configurable I/O structure. The MAX 7000S architecture provides predictable, deterministic timing because every logic path traverses the same predictable interconnect structure — unlike SRAM-based FPGAs that require device configuration on power-up. This makes the EPM7192SQC160-10N particularly well-suited to applications where instant-on behavior is critical and where designers need fixed propagation delays for worst-case timing analysis. The 10 ns tPD (pin-to-pin delay) of this -10N speed grade supports clock frequencies up to 100 MHz in combinatorial paths. Typical applications include address decoding for microprocessor and DSP systems, bus interfacing and arbitration logic (e.g., between an MCU and external peripherals), state-machine control for industrial automation, peripheral chip-select generation, and glue-logic replacement of discrete TTL/CMOS parts. Designers frequently choose this part when they need non-volatile, deterministic logic with the convenience of JTAG in-system reprogrammability. When designing with this device, pay careful attention to I/O bank supply pin requirements — VCCINT and VCCIO may need separate rails depending on the mixed-voltage interface scheme, and unused pins should be configured as outputs driving ground to minimize power. The 160-pin PQFP footprint requires careful PCB routing given the 0.65 mm pitch; an external JTAG header is recommended for ISP access during prototyping and field firmware updates. This page synthesizes distributor pricing, drop-in same-package alternatives from the MAX 7000S family, and practical design considerations not aggregated in any single manufacturer document.

見積もり お問い合わせ
EPM7192SQC160-15 - MAX 7000S CPLD, 192 Macrocells, 15ns | Altera
EPM7192SQC160-15

EPM7192SQC160-15 - MAX 7000S CPLD, 192 Macrocells, 15ns | Altera

The Altera EPM7192SQC160-15 is a high-density, high-performance CMOS Complex Programmable Logic Device (CPLD) from the MAX 7000S family, based on Altera's second-generation MAX architecture. It provides 192 macrocells, 3,750 usable gates, 124 user I/Os, and a 15 ns pin-to-pin logic delay, all housed in a 160-pin PQFP package. The device operates at 5 V and supports 5.0-V in-system programmability (ISP) through the built-in IEEE Std. 1149.1 JTAG interface. A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic device that combines the deterministic timing of PAL/GAL architectures with the density of multiple macrocell logic array blocks (LABs) interconnected via a programmable interconnect matrix (PIA). CPLDs sit between simple SPLDs/PLDs and FPGAs in the programmable logic hierarchy, offering fast, predictable input-to-output delays (suitable for glue logic and bus decoding) and instant-on configuration from on-chip EEPROM — without the external boot flash an FPGA usually requires. Key features include 4 Logic Array Blocks (LABs) of 36 macrocells, programmable interconnect with 100% connectivity, programmable output slew rate, JTAG boundary-scan support, and macrocell registers with individual clear, preset, clock, and clock-enable controls. Operating frequency is specified at 76.9 MHz with a worst-case 15 ns tPD. The PQFP-160 package gives 124 usable I/O pins, suitable for high-fanout glue-logic designs. The MAX 7000S architecture uses an EEPROM-based configuration cell array, so the device retains its logic pattern with no external boot memory and can be reprogrammed in-circuit up to 100 cycles. The 5.0-V ISP interface uses the standard 4-wire JTAG TAP, simplifying board-level bring-up. Each macrocell supports combinatorial or registered operation with separate sum-of-products terms for both output enable and registered feedback, giving flexible control over tri-state buses and registered outputs. Typical applications include bus interface bridging, address decoding and glue logic for microprocessor systems, peripheral controller hubs, JTAG-controlled board-level configuration, and replacement of multiple discrete 74LS/74F/74HC TTL packages. It is also used in legacy industrial controllers and avionics subsystems where instant-on, non-volatile logic is mandatory. When designing with this part, pay attention to the 5 V VCC requirement and observe the JTAG ISP programming voltage levels. Decoupling should follow the manufacturer guidance with 0.1 µF caps close to each VCC/GND pair. For new designs, consider MAX II or MAX V devices unless EEPROM-based instant-on is required. This page consolidates distributor pricing, drop-in same-brand variants, and practical JTAG/ISP design notes not found in the original datasheet alone.

見積もり お問い合わせ
EPM7192SQC160-7N - MAX 7000S 192-Macro CPLD, 7.5ns, PQFP-160 | Altera
EPM7192SQC160-7N

EPM7192SQC160-7N - MAX 7000S 192-Macro CPLD, 7.5ns, PQFP-160 | Altera

The Altera (Intel) EPM7192SQC160-7N is a high-density, EEPROM-based Complex Programmable Logic Device (CPLD) from the second-generation MAX 7000 family, housed in a 160-pin PQFP (Plastic Quad Flat Pack) package with 192 macro cells, 124 user I/Os, a 7.5 ns pin-to-pin propagation delay, and an internal counter frequency of 167 MHz at the -7 speed grade. The 'N' suffix indicates a lead-free / Pb-free terminal finish suitable for modern RoHS-compliant PCB assembly lines. What is a CPLD? A Complex Programmable Logic Device is a non-volatile programmable logic IC that sits between simple PLDs (PAL/GAL) and FPGAs in the programmable logic hierarchy. It uses an EEPROM or flash process to retain its configuration without an external boot memory, providing fast, deterministic combinational and registered logic with predictable timing. CPLDs are typically chosen for glue logic, bus interfacing, state-machine control, and system-level signal management where instant-on behavior and low power are essential. Key features of the EPM7192SQC160-7N include 3,750 usable gates, IEEE 1149.1 JTAG boundary-scan support, 5.0-V in-system programmability (ISP) through the JTAG port, and a commercial operating temperature range of 0 to 70 C. The MAX 7000 architecture provides a Programmable Interconnect Array (PIA) that routes signals between Logic Array Blocks (LABs), each containing 16 macro cells. The device supports user-selectable 3.3-V or 5.0-V I/O operation with multi-voltage interface capability, allowing direct connection to TTL, CMOS, and PCI-compatible buses. Typical applications include peripheral bus interfacing, address decoding and decoding for 8/16/32-bit microprocessors, state-machine controllers, and high-speed glue logic in telecom, industrial, and legacy computing platforms. The 5-V tolerant I/O and JTAG ISP also make it well suited to production-line programming and field upgrades through a standard 4-wire JTAG header. When designing with this device, ensure that the 5-V VCCIO rail is well decoupled with 0.1 uF and 10 uF capacitors placed close to the supply pins, and respect the maximum I/O current rating per bank. Programming should be performed using Altera/Intel Quartus II or the legacy MAX+PLUS II toolchain with a ByteBlasterMV or USB-Blaster download cable.

見積もり お問い合わせ
EPM7192SQI160-10 - MAX 7000S CPLD 192 Macrocell | Altera
EPM7192SQI160-10

EPM7192SQI160-10 - MAX 7000S CPLD 192 Macrocell | Altera

The Altera EPM7192SQI160-10 is a MAX 7000S-series Complex Programmable Logic Device (CPLD) with 192 macrocells, 124 user I/O pins, and a 10 ns pin-to-pin propagation delay, housed in a 160-pin plastic QFP package. It is a 5.0 V EEPROM-based programmable logic device built on Altera's second-generation MAX architecture, offering in-system programmability (ISP) and an internal counter frequency of 167 MHz. A CPLD (Complex Programmable Logic Device) is a programmable logic IC that combines multiple logic macrocells and a programmable interconnect array on a single die, providing deterministic non-volatile logic that is active immediately at power-up. In the product taxonomy, a CPLD sits between simple PLDs and FPGAs: CPLD -> programmable logic device (PLD) -> digital logic IC -> semiconductor. Unlike SRAM-based FPGAs, EEPROM-based MAX 7000S devices retain their configuration without an external boot device, which simplifies board bring-up and eliminates configuration-loading latency. Key features of the EPM7192SQI160-10 include 192 macrocells, 124 user I/O pins, 7.5 ns propagation delay, 167 MHz internal frequency, 5.0 V ISP, and an industrial temperature range of -40 C to +85 C. The 160-pin QFP package provides ample I/O for glue-logic consolidation, bus bridging, and state-machine implementations. The MAX 7000S architecture uses a programmable interconnect array (PIA) to route signals between logic array blocks (LABs), each containing 16 macrocells with individual product-term allocation. This architecture delivers predictable, fixed timing independent of routing, a critical advantage over FPGA fabric for deterministic control paths. Typical applications include industrial control glue logic, bus interface and protocol bridging, power-up sequencing state machines, legacy system replacement, and instrumentation front-end control. The 5.0 V I/O interface allows direct connection to legacy TTL/CMOS peripherals without level shifters. When designing with this device, note that the MAX 7000S family is a mature, legacy architecture; verify availability and consider MAX II or MAX V migration for new designs. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

見積もり お問い合わせ
EPM7192SQI160-10N - MAX 7000S CPLD, 192 Macrocells, 100MHz | Altera
EPM7192SQI160-10N

EPM7192SQI160-10N - MAX 7000S CPLD, 192 Macrocells, 100MHz | Altera

The Intel (formerly Altera) EPM7192SQI160-10N is a high-density, high-performance CMOS CPLD from the MAX 7000S family, packaged in a 160-pin PQFP and featuring 192 macrocells, 124 user I/Os, and 3.75K usable gates with -10 speed grade (10 ns pin-to-pin delay). The 'N' suffix denotes the industrial operating temperature range of 0C to 70C, while the 'S' indicates in-system programmability via 5.0V EEPROM. A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic IC that sits between simple PAL/GAL devices and high-density FPGAs in the programmable logic hierarchy. CPLDs are characterized by instant-on (no boot/configuration load required), deterministic timing, and EEPROM or flash-based configuration that retains its bitstream through power cycles. They belong to the broader class of programmable logic devices (PLDs) and are widely used for glue logic, bus interfacing, and state-machine implementation where fast, predictable response is more important than raw logic density. Key features of this part include a 10 ns pin-to-pin propagation delay, internal counter frequencies up to 167 MHz, 5.0V in-system programmability (ISP) via JTAG, and support for hot-socketing. The device is fabricated in 5V CMOS technology and integrates 192 macrocells arranged in Logic Array Blocks (LABs) interconnected by a programmable interconnect array (PIA). It also supports the IEEE 1149.1 boundary-scan standard for board-level testability. From an architectural perspective, the MAX 7000S family uses Altera's second-generation MAX architecture with each macrocell containing a programmable AND/OR array, a flip-flop, and product-term allocation logic. The EEPROM configuration memory provides non-volatile storage without external boot devices, and the 5V-tolerant I/O structure allows direct interface with TTL and CMOS logic of mixed-voltage systems without level-level shifting in most cases. Typical applications include bus interfacing (PCI bridge glue logic, address decoding), state-machine controllers in industrial automation, glue logic between microprocessors and peripherals, motor-control sequencing in factory automation, and legacy 5V system designs where non-volatile, deterministic logic is required. Designers should note the PQFP-160 package's lead pitch of 0.5 mm and verify PCB footprint compatibility with the device footprint before re-spinning layouts. The 5V supply requirement is non-negotiable; this device is not compatible with 3.3V-only rails without a level translator. Programming is performed via JTAG using Altera/Intel Quartus or legacy MAX+PLUS II software. This page synthesizes distributor stock data, drop-in alternative MPNs, and practical design notes - including board-level implementation guidance - not found in the standalone manufacturer datasheet.

見積もり お問い合わせ
EPM7256AEFC100-10N - MAX 7000 CPLD, 256 Macro, 10ns, 100-FBGA | Altera
EPM7256AEFC100-10N

EPM7256AEFC100-10N - MAX 7000 CPLD, 256 Macro, 10ns, 100-FBGA | Altera

The Altera (now Intel) EPM7256AEFC100-10N is a high-performance 3.3V EEPROM-based Complex Programmable Logic Device (CPLD) from the MAX 7000A family, featuring 256 macrocells, 16 logic array blocks (LABs), and 84 user I/O pins in a 100-ball FineLine BGA (FBGA, 11x11 mm) package. It implements the second-generation Multiple Array MatriX (MAX) architecture with a 10 ns pin-to-pin logic delay (tPD) and a 154.8 MHz maximum operating frequency, making it suitable for high-speed glue-logic, bus-interface, and state-machine replacement roles in telecom, industrial, and computing equipment. A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic device that sits between simple SPLDs/FPGAs and discrete logic in the programmable-logic taxonomy (CPLD -> programmable logic -> semiconductor). MAX 7000A devices are built on a 0.30 µm EEPROM process and provide 5,000 usable gates, in-system programmability (ISP) through the IEEE 1149.1 Joint Test Action Group (JTAG) interface, and 3.3V core operation that is 5V-tolerant on I/O pins. CPLDs are typically chosen when deterministic timing, instant-on non-volatile configuration, and high drive strength are required - features that FPGAs cannot match without external configuration memory. Key features of the EPM7256AEFC100-10N include 256 macrocells distributed across 16 LABs (16 macrocells per LAB), 84 user I/O pins on a 100-ball FBGA footprint (11 x 11 mm), four dedicated inputs, an internal 3.3V operation with 5V-tolerant I/O, multiVolt I/O supporting 1.8V/2.5V/3.3V/5V mixed-voltage environments, JTAG-based IEEE 1149.1 boundary-scan and ISP, and built-in PCI compatibility. The -10 speed grade indicates a 10 ns maximum pin-to-pin delay (tPD), making this variant suitable for sub-100 MHz synchronous designs where -7 (7.5 ns) or -15 (15 ns) alternatives may be over- or under-specified. Architecturally, the device combines a programmable AND/OR/PLA-style logic fabric with a global interconnect, a per-macrocell flip-flop with selectable clear/preset/clock, and a programmable interconnect array (PIA) that routes signals between LABs with deterministic delay. The EEPROM-based configuration cell provides instant-on behavior in under 100 µs and supports 100 in-system program/erase cycles, enabling field upgrades without removing the device from the board. Typical applications include high-speed bus-interface bridging (PCI, ISA, VME, PCMCIA), address decoding and chip-select generation for microprocessors and DSPs, glue-logic consolidation in networking line cards and base stations, peripheral interfacing in telecom and industrial control equipment, and state-machine implementation where deterministic 10 ns timing is required. Designers should ensure that the JTAG pins (TCK, TMS, TDI, TDO) are accessible for ISP, that decoupling capacitors (0.1 µF and 10 µF) are placed within 5 mm of each power pin, and that unused I/O are explicitly configured as outputs or inputs in the Quartus/MAX+PLUS II design to avoid floating-pin failures.

見積もり お問い合わせ