集積回路

サブカテゴリ

📁 ADC/DAC 3,100+ 製品 📁 アンプIC 1,900+ 製品 📁 オーディオコーデック 18 製品 📁 オーディオIC 2 製品 📁 クロック＆タイミング 670+ 製品 📁 Comparator ICs 1 製品 📁 DSP 1,100+ 製品 📁 データ収集IC 2 製品 📁 デジタルポテンショメータ 4 製品 📁 ディスプレイドライバ＆コントローラ 1 製品 📁 FPGA & CPLD 7,300+ 製品 📁 インターフェースIC 3,400+ 製品 📁 LEDドライバ 1 製品 📁 ロジックIC 460+ 製品 📁 メモリIC 870+ 製品 📁 マイクロコントローラ 20,000+ 製品 📁 マイクロプロセッサ 4 製品 📁 モータドライバ 1 製品 📁 その他 1 製品 📁 Sensor and Detector Interfaces 1 製品 📁 専用IC 15 製品 📁 ビデオIC 14 製品

製品 (39,000+)

INA2181A3IDGSR - 26V Dual-Channel Current Sense Amp | TI
INA2181A3IDGSR

INA2181A3IDGSR - 26V Dual-Channel Current Sense Amp | TI

The Texas Instruments INA2181A3IDGSR is a 26V, dual-channel, bidirectional voltage-output current sense amplifier with a fixed gain of 100 V/V (A3 version), 350 kHz bandwidth, and a common-mode input range of -0.2 V to +26 V, housed in a 10-pin VSSOP (DGS) package rated from -40C to +125C. A current sense amplifier (also called a current-shunt monitor) is a specialized difference amplifier that senses the small voltage drop across a shunt resistor and converts it into a ground-referenced output signal. Within the power-management IC hierarchy, it sits alongside voltage regulators and battery-management devices as a core building block of power monitoring and protection subsystems. Key features include the wide -0.2 V to +26 V common-mode range that operates independently of the supply voltage, enabling high-side and low-side sensing on 24 V industrial rails. The A3 gain option of 100 V/V with a 2 V/us output slew rate and 350 kHz bandwidth suits fast, medium-sensitivity current monitoring. Offset voltage is tightly specified: a maximum of plus/minus 150 uV at VCM = 0 V and plus/minus 500 uV at VCM = 12 V, according to the TI datasheet. The INAx181 architecture senses bidirectional current with an external reference voltage applied to the REF pin, allowing the output to be offset for positive and negative current indication. Rail-to-rail output swing maximizes ADC dynamic range on low-supply rails, and the cost-optimized design targets volume production. Typical applications include battery charging systems, 24 V industrial power supplies, motor drive DC bus monitoring, and telecom or server power-supply current telemetry where two channels share one shunt scheme or monitor two rails. Design consideration: keep the shunt resistor value and the A3 gain of 100 V/V balanced - a 10 mV full-scale shunt drop yields 1 V output, so size the shunt to use the ADC input range without exceeding the output swing limits. This page synthesizes distributor pricing, drop-in alternatives within the INAx181 family, and practical design notes not found in the manufacturer datasheet.

見積もり お問い合わせ
INA2181A4QDGSRQ1 - 26V Dual 350kHz Current Sense Amp AEC-Q100 | TI
INA2181A4QDGSRQ1

INA2181A4QDGSRQ1 - 26V Dual 350kHz Current Sense Amp AEC-Q100 | TI

The Texas Instruments INA2181A4QDGSRQ1 is an AEC-Q100 qualified, 26V, dual-channel, bidirectional current sense amplifier (also called a current-shunt monitor) with a 350 kHz bandwidth and a fixed gain of 200 V/V (A4 gain variant), housed in a 10-pin VSSOP (DGS) package. It senses voltage drops across current-sense resistors at common-mode voltages from -0.2 V to +26 V, independent of its own supply voltage, and provides a rail-to-rail voltage output. A current sense amplifier is a specialized difference amplifier, within the broader hierarchy of instrumentation amplifiers and operational amplifier signal-conditioning ICs, designed to measure the small differential voltage developed across a shunt resistor and convert it into a ground-referenced output voltage proportional to load current. Bidirectional devices like the INA2181 also detect current flowing in both directions, which is essential in battery charging and discharging monitoring. Key features of the INA2181A4QDGSRQ1 include the wide -0.2 V to 26 V common-mode range that survives automotive load-dump-adjacent conditions, dual-channel integration that halves board area versus two single-channel amplifiers, a 350 kHz bandwidth suitable for fast current-loop control, and the cost-optimized INAx181-Q1 family architecture. Technically, the INA2181-Q1 uses a zero-drift-free precision front end with a fixed gain set by internal resistors; the A4 variant provides 200 V/V gain, allowing very small shunt resistances (sub-10 mOhm) to be used, reducing shunt power dissipation at high currents. The voltage output architecture requires no ADC-side gain stage and simplifies interfacing with microcontroller ADC inputs. Typical applications include automotive battery management systems, 48V and 12V automotive power rails, industrial motor drives, telecom -48V systems, and server hot-swap current monitoring. Design-wise, place the shunt resistor close to the amplifier inputs, use Kelvin (4-wire) connections to the sense resistor, and filter differential noise at the inputs. Note that the 200 V/V gain limits full-scale shunt voltage to about 20 mV for a 4 V output swing. This page synthesizes distributor pricing, drop-in same-family gain-variant alternatives, and practical design notes not found in the manufacturer datasheet.

見積もり お問い合わせ
INA240A1D - 20V/V Bidirectional Current Sense Amp | TI
INA240A1D

INA240A1D - 20V/V Bidirectional Current Sense Amp | TI

The Texas Instruments INA240A1D is a bidirectional, zero-drift current-sense amplifier with a gain of 20 V/V, a common-mode voltage range of -4 V to 80 V, and an 8-pin SOIC package. It measures the voltage developed across a shunt resistor on either the high side or low side of a power path and produces an analog output proportional to current. A current-sense amplifier is a specialized instrumentation amplifier that converts the small differential voltage across a current shunt into a larger, easier-to-process voltage. The INA240 family belongs to the amplifier hierarchy as a current-sense amplifier, instrumentation amplifier, analog IC, and semiconductor. Its common-mode range allows the shunt to remain near a supply rail while high voltage, high current, or both are present in the monitored circuit. The INA240A1D combines a 20 V/V gain setting with bidirectional operation and enhanced PWM rejection. Zero-drift architecture minimizes output drift as temperature changes, while the -4 V to 80 V common-mode range supports demanding industrial power systems. Its analog output can be centered near ground for bidirectional current measurement by applying the appropriate reference configuration. The device also supports unidirectional sensing when both reference pins are tied to ground. Internally, the device provides precision differential sensing, a low-offset amplifier, and an analog output stage. Because the common-mode input range is independent of the supply voltage in the relevant operating region, the INA240 can sense voltage drops across a high-side shunt without requiring the amplifier supply to exceed the sensed bus voltage. This architecture is particularly useful when PWM switching nodes create large common-mode transients. Typical applications include motor-control systems, industrial power supplies, robotics, solar inverters, battery packs, solenoid drivers, LED drivers, and protected DC power rails. The INA240A1D is especially appropriate when current must be measured bidirectionally, the shunt may sit above ground, and PWM rejection is important. A 20 V/V gain also reduces the required shunt resistance when the measured current range is relatively low. When designing the circuit, verify that the shunt power dissipation remains below its rating and that the amplifier output stays within its valid output range at maximum load current. Place the differential input traces directly across the shunt, keep them short and symmetric, and provide stable supply decoupling close to the device. Do not exceed the absolute maximum ratings for supply voltage, common-mode voltage, or input voltage. This page combines manufacturer specifications, drop-in alternatives, application guidance, and practical design notes for engineers evaluating the INA240A1D in motor, industrial, and high-side current-measurement systems.

見積もり お問い合わせ
INA240A1PWR - 80V Bidirectional Current Sense Amp | TI TSSOP-8
INA240A1PWR

INA240A1PWR - 80V Bidirectional Current Sense Amp | TI TSSOP-8

The Texas Instruments INA240A1PWR is a -4 V to 80 V bidirectional, ultra-precise current-sense amplifier with enhanced PWM rejection, housed in an 8-pin TSSOP (PW) package with a fixed gain of 20 V/V. It senses drops across shunt resistors over a wide common-mode range independent of supply voltage and integrates a zero-drift chopper architecture that keeps input offset below 25 uV and offset drift below 100 nV/°C. What is a current-sense amplifier? A current-sense amplifier is a specialized analog IC that measures the small differential voltage developed across a shunt resistor carrying the load current, then amplifies that millivolt-level signal to a ground-referenced output that an ADC, microcontroller, or comparator can read. As a member of the power-management and amplifier IC hierarchy, the INA240 family combines a precision difference amplifier with PWM-rejection circuitry, allowing it to ignore large dV/dt transients from switching power stages while still maintaining high DC accuracy. Key features include 20 V/V gain (A1 variant), 132 dB DC common-mode rejection ratio (CMRR), a 1.5 MHz bandwidth, and 1.6 mA maximum quiescent supply current from a 2.7 V to 5.5 V supply rail. Enhanced PWM rejection suppresses transients from 60 V/ns common-mode slew events that occur when measuring current in motor-drive and solenoid circuits, allowing accurate readings through PWM edges without blanking. The INA240 architecture pairs an input EMI filter and chopper-stabilized front end with a precision output stage. The chopper stabilization shifts the 1/f noise to a higher frequency where it is filtered out, yielding the 5 uV/°C typical offset drift and 25 uV maximum input offset specified across the -40°C to +125°C operating range. Independent supply and common-mode ranges allow the IC to operate from a 3.3 V logic rail while sensing high-side current at 24 V, 36 V, or 48 V industrial bus voltages. Typical applications include 48 V brushed and brushless DC motor control, solenoid and valve current monitoring, server and telecom 12 V/24 V hot-swap current sensing, power-converter feedback, and battery-pack current monitoring in e-mobility and industrial robots. The A1 gain of 20 V/V suits low-side and high-side sensing where shunt full-scale drop is on the order of 75 mV. When designing with this device, choose the shunt resistor so that peak differential voltage at maximum load stays within the linear output range (typically 0.1 V to VS - 0.1 V), and place a 1 nF to 10 nF RC network on the input pins if the layout introduces parasitic common-mode noise. Use Kelvin (4-terminal) connection to the shunt to keep ground-loop errors out of the measurement. This page synthesizes real-time distributor pricing, drop-in alternatives, and design notes that go beyond the manufacturer datasheet, giving engineers a one-stop reference for the INA240A1PWR.

見積もり お問い合わせ
INA240A3D - 80V Current Sense Amplifier | Texas Instruments
INA240A3D

INA240A3D - 80V Current Sense Amplifier | Texas Instruments

The Texas Instruments INA240A3D is a bidirectional, ultra-precise voltage-output current-sense amplifier with an operating common-mode range of -4 V to 80 V, enhanced PWM rejection, and an 8-pin SOIC package. It is designed to measure the voltage developed across a shunt resistor in high-side or low-side current-sensing circuits while supporting common-mode voltages above the device supply voltage. A current-sense amplifier is a specialized amplifier within the instrumentation-amplifier and signal-conditioning hierarchy. It converts the small differential voltage produced by a shunt resistor into a proportional analog voltage suitable for measurement by an ADC, MCU, motor controller, or protection circuit. The INA240 family is classified as an analog signal-chain IC and is commonly placed beside a power-conversion stage to create a precision current-feedback signal. The INA240A3D combines bidirectional measurement, a wide -4 V to 80 V common-mode range, and enhanced PWM rejection. Bidirectional operation allows the output polarity to represent either positive or negative current. The negative common-mode capability is useful when a shunt is observed during a below-ground flyback interval, while the upper range supports current monitoring in systems operating well above the amplifier supply voltage. Its stated operating-temperature range is -40 °C to 125 °C. The device uses a voltage-output architecture with reference and supply connections that support system-level current measurement. Because the amplifier can operate independently of the common-mode voltage being sensed, its performance is maintained in applications where the shunt voltage swings rapidly while the amplifier remains powered from a low-voltage rail. This architecture is particularly useful in motor drives, solenoid controls, power converters, and battery-powered systems where a conventional low-voltage current-sense amplifier may leave the measurement range. Typical uses include high-side DC-link monitoring, low-side motor-return measurement, solenoid current diagnostics, power-supply telemetry, and battery charge or discharge current sensing. In these systems, the shunt is placed in the current path and connected to the differential input of the INA240A3D. The resulting analog voltage can be routed to a control ADC or comparator for regulation, fault detection, or data logging. Design the input and reference network carefully because the differential shunt voltage, amplifier supply, output range, and selected shunt resistance jointly determine usable measurement range. Keep the shunt and amplifier connections compact to minimize parasitic pickup, use a Kelvin connection where practical, and route the differential pair away from switching-node copper. The manufacturer's INA240 datasheet should be used for pin assignments, gain, input limits, output behavior, and recommended application values. This page organizes the verified INA240A3D operating limits, package information, sourcing details, replacement constraints, application guidance, and design considerations. It also distinguishes a confirmed same-package automotive alternative from incompatible package or gain variants that cannot be treated as drop-in replacements.

見積もり お問い合わせ
INA293B1QDBVRQ1 - 110V, 1.3MHz Current Sense Amp | TI
INA293B1QDBVRQ1

INA293B1QDBVRQ1 - 110V, 1.3MHz Current Sense Amp | TI

The Texas Instruments INA293B1QDBVRQ1 is an AEC-Q100 qualified, ultra-precise bidirectional current-sense amplifier that measures voltage drops across shunt resistors over an exceptionally wide common-mode range from -4 V to +110 V. It delivers a 1.3 MHz small-signal bandwidth with a 20 V/V fixed gain (B1 variant) in a 5-pin SOT-23 (DBV) package, making it ideal for high-voltage, high-precision current monitoring in space-constrained automotive and industrial designs. What is a current-sense amplifier? A current-sense amplifier is a specialized analog building block that measures the small differential voltage developed across a shunt resistor placed in series with a load or supply rail, and converts it to a ground-referenced output voltage proportional to load current. Unlike a general-purpose op amp, a current-sense amplifier tolerates large common-mode voltages - often well above its own supply - and rejects the common-mode component, exposing only the shunt drop. The INA293-Q1 sits at the high-precision end of this category, combining low offset, low drift, and the widest common-mode range in TI's portfolio of unidirectional/bidirectional current-sense amplifiers. Key features include a maximum offset voltage of ±30 µV across temperature, ±0.2% gain error, and a quiescent current of approximately 1.5 mA over the -40 °C to +125 °C automotive grade-1 temperature range. The B1 gain variant provides 20 V/V; the B2, B3, B4, and B5 variants in the same family offer 50 V/V, 100 V/V, 200 V/V, and 500 V/V respectively, all sharing the SOT-23-5 footprint. The device operates from a single 2.7 V to 20 V supply and is robust against input transients well beyond its supply rail. Internally, the INA293-Q1 uses a precision chopped-input front end followed by a fixed-gain output stage, achieving CMRR greater than 100 dB at DC and PSRR above 80 dB at 1 kHz. The wide common-mode architecture supports both high-side and low-side sensing topologies, enabling accurate monitoring in 48 V mild-hybrid automotive systems, industrial 24 V/36 V/48 V rails, and telecom -48 V applications without level shifting. Typical applications include 48 V eMobility battery management, BLDC motor phase-current monitoring, server/AI accelerator hot-swap current telemetry, USB Power Delivery contract current sensing, and solar inverter string monitoring. Compared with isolated current transducers, the INA293-Q1 achieves comparable accuracy at a fraction of the BOM cost and PCB area. When designing with this device, place the shunt resistor as close as possible to the input pins and keep the input traces symmetrical to preserve CMRR. A 0.1 µF supply bypass capacitor placed within 5 mm of the V+ pin is recommended for stable operation across the full -4 V to +110 V common-mode range. This page synthesizes distributor pricing, drop-in alternatives from the INA293-Q1 family and competing high-side current-sense amplifiers, and practical design notes that go beyond the manufacturer datasheet.

見積もり お問い合わせ
INA333AIDGKR - 50uA Zero-Drift INA | Texas Instruments
INA333AIDGKR

INA333AIDGKR - 50uA Zero-Drift INA | Texas Instruments

The Texas Instruments INA333AIDGKR is a low-power, precision, zero-drift instrumentation amplifier with a 1.8 V to 5.5 V supply range, 10 uV typical input offset voltage, 150 kHz bandwidth, and an 8-pin VSSOP (DGK) package. It uses a three-operational-amplifier architecture and one external gain-setting resistor to provide gains from 1 to 1000. An instrumentation amplifier is a differential analog amplifier optimized for measuring small voltage signals superimposed on larger common-mode voltages. Its internal three-op-amp topology provides high input impedance and accurate differential gain, making it more practical than a discrete difference amplifier when source impedances are unequal or signals arrive from sensors. INA333 belongs to the precision amplifier hierarchy: instrumentation amplifier, operational amplifier, analog IC, and semiconductor. The INA333 emphasizes low power, low offset drift, and rail-to-rail output operation. Verified source data identifies a 50 uA typical supply current and a gain equation of G = 1 + 100 kΩ/RG. The 150 kHz bandwidth supports fast sensor signals, while the 10 uV input offset specification improves measurement resolution around the zero-input condition. Its input stage is designed to reject common-mode variation encountered in bridge, current-sense, and portable sensing systems. The zero-drift architecture reduces temperature-related offset movement, helping preserve measurement stability when the sensor signal is small relative to input offset. Rail-to-rail output increases usable output swing on low-voltage supplies, although engineers must still verify input common-mode range, output swing, bandwidth, and input bias behavior across the complete intended voltage and temperature range using the manufacturer datasheet. Typical uses include portable medical monitoring, battery-powered industrial instrumentation, pressure and load-cell signal conditioning, low-side current measurement, and low-voltage sensor acquisition. The 50 uA power budget is especially useful for wearable and remote systems where every microamp affects battery life. The VSSOP-8 package supports compact layouts, but differential routing and gain-resistor placement remain essential. For best results, connect the gain resistor close to the RG pins, use a low-noise reference supply, maintain symmetric input routing, and follow the datasheet bypass recommendations. Verify common-mode limits at every operating point rather than assuming rail-to-rail input. This page combines verified distributor data, manufacturer specifications, sourcing guidance, and practical design context.

見積もり お問い合わせ
INA4180AIPWR-Q1 - Quad 26V Current Sense Amp, 20 V/V | TI
INA4180AIPWR-Q1

INA4180AIPWR-Q1 - Quad 26V Current Sense Amp, 20 V/V | TI

The Texas Instruments INA4180AIPWR-Q1 is an automotive-grade, quad-channel voltage-output current-sense amplifier (current-shunt monitor) in a 14-pin TSSOP (PW) package. It senses voltage drops across current-sense resistors at common-mode voltages from -0.2 V to +26 V, independent of the 1.7 V to 5.5 V supply, with a fixed gain of 20 V/V (A1 version) and 350 kHz bandwidth. A current-sense amplifier is a specialized difference amplifier that measures the small voltage developed across a shunt resistor and converts it into a ground-referenced output signal. Within the power-management IC hierarchy, it sits between the shunt element and an ADC or controller, enabling precise current monitoring for system control and protection in automotive and industrial power rails. Key features include the wide -0.2 V to 26 V common-mode range that survives load-dump and cold-crank conditions without external circuitry, four independent amplifiers in one package that reduce BOM cost and board area in multi-rail designs, rail-to-rail output for maximum ADC dynamic range, and offset voltage as low as [DATA_NEEDED: Vos]. The extended -40C to +125C operating range and AEC-Q100 qualification make it suitable for under-hood and body electronics applications. Architecturally, the INAx180 family integrates a precision matched resistor network that sets the gain (A1 = 20 V/V, A2 = 50 V/V, A3 = 100 V/V, A4 = 200 V/V), eliminating external gain-setting resistors and their matching errors. The zero-crossover-compatible input stage supports sensing on the low side or high side of the rail, and the output is referenced to ground regardless of common-mode voltage. Typical applications include automotive battery current monitoring, 48V and 12V board-net supervision, electric power steering motor current feedback, DC-DC converter current loops, and industrial PLC analog input modules. Cost-optimized designs benefit from the quad-channel integration. Design tip: choose the shunt resistor so the full-scale drop is 10-50 mV to balance accuracy against power dissipation, and use Kelvin (4-wire) connections to the shunt for best precision. Pricing shown as of 2026-08-29.

見積もり お問い合わせ
INA597IDGKT - Precision 2MHz Difference Amplifier | TI
INA597IDGKT

INA597IDGKT - Precision 2MHz Difference Amplifier | TI

The INA597IDGKT is a high-precision, wide-bandwidth difference amplifier from Texas Instruments, designed for cost-sensitive applications requiring accurate differential signal measurement. It integrates a precision operational amplifier with a matched resistor network, achieving a maximum offset voltage of 200 µV and an offset drift of 5 µV/°C. The device operates from a single supply of 4.5 V to 36 V or dual supplies of ±2.25 V to ±18 V, with a bandwidth of 2 MHz and a common-mode rejection ratio (CMRR) of 88 dB. Housed in an 8-pin VSSOP (DGK) package, the INA597IDGKT is suitable for space-constrained designs. A difference amplifier is a type of operational amplifier circuit that amplifies the voltage difference between two inputs while rejecting common-mode voltages. It is a fundamental building block in analog signal processing, often used in current sensing, bridge amplification, and precision measurement systems. The INA597 belongs to the broader category of instrumentation amplifiers, which are specialized for accurate differential signal acquisition in noisy environments. Key features of the INA597IDGKT include its low offset voltage and drift, which ensure accurate measurement over temperature, and its high CMRR of 88 dB, which rejects common-mode noise. The device also offers rail-to-rail output, allowing maximum dynamic range in single-supply applications. Its low power consumption makes it ideal for battery-powered and portable instrumentation. The INA597 uses TI's e-trim™ technology, which provides precision trimming of the internal resistor network to achieve excellent gain accuracy and temperature stability. The integrated resistors are laser-trimmed to maintain tight matching, ensuring consistent performance across the operating temperature range. The device is fully specified for operation from -40°C to +125°C, making it suitable for industrial and automotive environments. Typical applications include motor current sensing, battery management systems, and precision data acquisition. In motor control, the INA597IDGKT can measure the voltage across a shunt resistor to monitor current, providing feedback for closed-loop control. In battery management, it can sense charge/discharge currents with high accuracy. The device's wide supply range and rail-to-rail output also make it suitable for industrial process control and test equipment. When designing with the INA597IDGKT, ensure that the input common-mode voltage remains within the specified range to maintain linearity. The reference pin (REF) allows level shifting of the output, which is useful in single-supply applications where the output must be centered at a specific voltage. Proper PCB layout with short traces and adequate bypassing will optimize performance.

見積もり お問い合わせ
INA790A-Q1 - 110V 75ARMS Ultra-Precise Current Sense Amp | TI
INA790A-Q1

INA790A-Q1 - 110V 75ARMS Ultra-Precise Current Sense Amp | TI

The Texas Instruments INA790A-Q1 is an AEC-Q100 qualified, 110V, 75ARMS integrated-shunt ultra-precision current-sense amplifier with enhanced PWM rejection, housed in a 15-VSON (DEK) 6x6 mm package. It combines a calibrated 400 micro-ohm Kelvin-connected shunt resistor with a zero-drift chopped amplifier, delivering +/-35 ppm/degrees C temperature drift and bidirectional current measurement from -4V to +110V common-mode. What is a current-sense amplifier? A current-sense amplifier is an analog IC that measures the voltage across a shunt resistor placed in series with a load and amplifies the small differential voltage into a ground-referenced output proportional to load current. Current-sense amplifiers sit within the signal-chain hierarchy as follows: current-sense amplifier -> instrumentation amplifier -> analog amplifier -> power management analog IC. INA790A-Q1 belongs to the integrated-shunt subfamily, where the shunt resistor and the gain stage are co-packaged, eliminating PCB layout-induced Kelvin errors and parasitic resistance drift that plague discrete solutions. Key features include a -4V to +110V wide common-mode range that survives load-dump and cold-crank transients in 48V automotive rails, 75ARMS continuous current handling, enhanced PWM rejection that suppresses large dv/dt common-mode steps from switching power stages, 1.3 MHz bandwidth for fast transient response, and a low 35 ppm/degrees C maximum temperature drift enabled by the chopper-stabilized architecture. The integrated 400 micro-ohm shunt eliminates external resistor stocking, drift concerns, and board-space overhead. The INA790A-Q1 uses a zero-drift chopper architecture that modulates the input offset voltage to a higher frequency, samples the modulation envelope, and feeds back to cancel the original offset. This technique virtually eliminates the 1/f noise corner and the offset drift that limit conventional current-sense amplifiers in high-precision DC and slow-varying measurements. Typical applications include 48V automotive BLDC motor phase current sensing, server and telecom hot-swap controller current monitors, industrial solenoid and actuator current feedback, solar inverter string current measurement, and battery management system (BMS) pack-current sensing. The AEC-Q100 Grade 1 qualification and PWM rejection make it specifically tailored to inverter and motor-drive environments. When designing with this device, place the INA790A-Q1 in the Kelvin path as close to the load current shunt as possible. Because the shunt is internal, the only PCB layout concern is keeping high-current traces off the analog ground return. Use the REF pin to level-shift the output for bidirectional sensing into an ADC with a ground-referenced input. This page synthesizes TI datasheet parameters, DigiKey pricing, INA790A vs INA790B comparison, and practical design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ
INA791B-Q1 - 110V 75A High-Bandwidth Current Sense Amp | Texas Instruments
INA791B-Q1

INA791B-Q1 - 110V 75A High-Bandwidth Current Sense Amp | Texas Instruments

The Texas Instruments INA791B-Q1 is an AEC-Q100-qualified, ultra-precise bidirectional current-sense amplifier with integrated 75A EZShunt technology, supporting a common-mode voltage range of -4V to +110V independent of supply. Housed in a 14-pin DFN (DEK) package measuring approximately 2.5 mm x 3 mm, the B-grade variant offers enhanced precision over the A-grade, including tighter gain error and offset drift specifications optimized for high-accuracy current measurement in automotive and industrial systems. A current-sense amplifier is an analog IC that measures the small differential voltage developed across a shunt resistor carrying a large load current, while rejecting the large common-mode voltage present at the shunt terminals. The category belongs to the instrumentation amplifier family, itself a subclass of operational amplifiers used in measurement and protection subsystems. Current-sense amplifiers sit in the signal chain between the power stage and the MCU/ADC, enabling telemetry, overcurrent protection, and closed-loop control in DC/DC converters, motor drivers, and battery management systems. Key features of the INA791B-Q1 include a wide -4V to +110V common-mode range, high bandwidth for fast transient response, support for 75A RMS continuous current via the integrated EZShunt resistor, and a single 2.7V to 5.5V supply drawing only 3.75 mA maximum quiescent current. The B-grade variant delivers tighter initial accuracy and lower drift than the A-grade, making it well-suited to precision telemetry across the automotive temperature range of -40C to +125C. The architecture combines a precision chopper-stabilized front end with an EZShunt integrated shunt element, eliminating external sense resistors while maintaining high CMRR across the entire common-mode range. The device outputs an analog voltage proportional to load current that can be routed directly to an ADC input for software-based current monitoring, fault detection, and coulomb counting. Typical applications include 48V automotive electrical systems, battery management in HEV/EV powertrains, motor control in body and chassis ECUs, solenoid and actuator monitoring, and industrial high-voltage bus telemetry. The integrated shunt simplifies PCB layout and reduces parasitic inductance that otherwise degrades high-di/dt measurement accuracy. When designing with this part, route the high-current path directly through the integrated EZShunt pins to minimize parasitic resistance, and place a low-ESR decoupling capacitor close to the VS pin. The bidirectional capability means the output polarity indicates current direction, which simplifies charge/discharge monitoring in battery systems.

見積もり お問い合わせ
INA819IDR - 35µV Offset Low-Power Instrumentation Amp | Texas Instruments
INA819IDR

INA819IDR - 35µV Offset Low-Power Instrumentation Amp | Texas Instruments

The Texas Instruments INA819IDR is a low-power (350 µA), high-precision instrumentation amplifier housed in an 8-pin SOIC (D) package, offering 35 µV maximum offset voltage, 8 nV/√Hz input-referred noise density, and ±60 V overvoltage protection on the gain-setting pins (pins 2 and 3). A single external resistor sets any gain from 1 to 10,000, making it a flexible analog front-end building block. An instrumentation amplifier (INA / in-amp) is a precision differential amplifier that combines high input impedance, accurate fixed gain, and excellent common-mode rejection ratio (CMRR). It is constructed from internal op-amps and a precision resistor network; the user only programs the gain with one external resistor. Within the analog signal-chain hierarchy, instrumentation amplifiers sit above standard op-amps and are the preferred first stage for low-level, high-CMRR sensor readout, before downstream ADCs, SAR drivers, or programmable-gain stages. The INA819 targets precision industrial, medical, and test-and-measurement designs that demand excellent DC accuracy and very low broadband noise. Key specifications include 35 µV maximum input offset voltage, 0.4 µV/°C maximum offset drift, 8 nV/√Hz voltage noise density, 120 dB minimum CMRR (G = 100), 7 MHz bandwidth (G = 100), and 1.6 V/µs slew rate. The super-beta input stage delivers very low input bias current (10 nA maximum) and high input impedance, supporting direct connection to high-impedance bridges and transducers without external buffers. Architecturally, the INA819 combines a super-beta bipolar input front-end with a current-feedback gain stage and laser-trimmed thin-film resistors, achieving <0.4 µV/°C drift and 120 dB CMRR at 1 kHz. It supports single-supply 4.5 V to 36 V or dual-supply ±2.25 V to ±18 V operation, suiting both battery-powered and industrial 24 V bus rails. Typical applications include bridge pressure-strain gauge signal conditioning, weigh scales, ECG/biopotential front ends, industrial process-control analog inputs, and battery-cell monitoring AFE stages. The ±60 V input protection (gain pins only) allows direct connection to industrial sensor lines without external clamping in many cases. When designing with the INA819, choose the gain resistor close to the INA pins to minimize parasitic capacitance and maintain CMRR above 100 dB. For highest DC accuracy, add a low-pass RC filter at the output to attenuate RF rectification before the ADC. This page synthesizes distributor pricing, verified drop-in alternatives, and practical design notes - engineering context not found in the manufacturer datasheet alone.

見積もり お問い合わせ
INA950-SEP - 80V Ultra-Precise Current-Sense Amp | TI
INA950-SEP

INA950-SEP - 80V Ultra-Precise Current-Sense Amp | TI

The INA950-SEP from Texas Instruments is a space-enhanced product (SEP) current-sense amplifier designed for ultra-precise current measurements in high-reliability applications. It senses the voltage drop across a shunt resistor over a wide common-mode range from 2.7V to 80V, making it ideal for high-side current sensing in systems with large supply voltages. The device operates from a single 2.7V to 5.5V supply while drawing only 370μA (typical) of quiescent current, and is available in the TSSOP-8 package. A current-sense amplifier is a specialized operational amplifier that measures current by amplifying the small differential voltage across a sense resistor while rejecting the common-mode voltage. It is a key building block in power management systems, enabling accurate monitoring of load currents, battery charging, and power supply health. The INA950-SEP belongs to the family of analog current-sense amplifiers, which are essential for closed-loop control and protection in industrial, automotive, and aerospace systems. Key features include a wide common-mode input range of 2.7V to 80V, a bandwidth of 1.1MHz, and ultra-precise gain accuracy. The device is designed for space applications, offering enhanced radiation tolerance and reliability. Its low quiescent current of 370μA minimizes power consumption, making it suitable for battery-powered and energy-harvesting systems. The TSSOP-8 package provides a compact footprint for space-constrained PCBs. Technically, the INA950-SEP uses a precision current-sense architecture that maintains high accuracy across temperature and supply variations. The wide common-mode range allows it to monitor currents on high-voltage rails without level shifting, simplifying system design. The 1.1MHz bandwidth enables fast transient response, which is critical for detecting overcurrent conditions in real time. Typical applications include high-side current sensing in power supplies, battery management systems, motor control, and load switches. In space applications, it is used for power monitoring in satellites and spacecraft, where reliability and precision are paramount. The device's wide common-mode range and low power consumption make it versatile for both high-voltage and low-power systems. When designing with the INA950-SEP, ensure that the shunt resistor is placed in the high-side path and that the common-mode voltage does not exceed the absolute maximum rating. Proper PCB layout with Kelvin connections to the shunt resistor is essential to minimize parasitic resistance and maintain measurement accuracy.

見積もり お問い合わせ
IPQ8072 - Quad-core Wi-Fi 6 SoC, 2.2GHz, Networking Pro 1200 | Qualcomm
IPQ8072

IPQ8072 - Quad-core Wi-Fi 6 SoC, 2.2GHz, Networking Pro 1200 | Qualcomm

The Qualcomm IPQ8072 is a quad-core 64-bit ARM Cortex-A53 networking system-on-chip (SoC) operating up to 2.2 GHz, integrated into Qualcomm's Networking Pro 1200 platform for premium Wi-Fi 6 (802.11ax) routers, gateways, and mesh systems. It supports up to 12 spatial streams across 2.4 GHz, 5 GHz, and 6 GHz bands when paired with QCN9074 or QCN9024 companion radios, delivers up to 5.4 Gbps aggregate PHY rate, and ships in a 772-ball FCBGA package. The die integrates a quad-core CPU subsystem, dual-band MAC/BB blocks, dedicated packet engine hardware, and security acceleration. A Wi-Fi 6 SoC is a system-on-chip that consolidates the application processor, Wi-Fi baseband/MAC, networking offloads, and crypto engines into a single die, replacing what was historically a CPU-plus-discrete-Wi-Fi-chipset architecture. Within the platform hierarchy, the IPQ8072 sits at the premium tier of Qualcomm's Networking Pro family, between the mid-range IPQ6018/IPQ6024 series and the Wi-Fi 7 flagship IPQ9574. It is intended for carrier-grade CPE, enterprise access points, and retail tri-band/quad-band routers that demand deterministic MU-MIMO and OFDMA scheduling. Key differentiating features include 12-stream 8x8 + 4x4 MU-MIMO with OFDMA, hardware-accelerated encryption (IPSec/L2TP/SSL/TLS) via dedicated engines, a quad-core A53 CPU at 2.2 GHz for control plane and SDK extensibility, support for up to 2.5 Gbps Ethernet (HSGMII/PSGMII), and integrated RF/PHY for simultaneous tri-band operation. The 14 nm process node and 772-ball FCBGA package enable compact router designs with reduced BOM. Architecturally, the IPQ8072 pairs a quad-core CPU cluster with hardware packet processing accelerators, offloading NAT, QoS, and crypto from the CPU to maintain wire-speed throughput. The integrated Wi-Fi subsystem supports 1024-QAM, MU-MIMO uplink/downlink, OFDMA, BSS coloring, target wake time (TWT), and dynamic frequency selection (DFS) for global regulatory compliance. The Networking Pro 1200 platform framing also brings platform-level features like Qualcomm's Wi-Fi SON (Self-Organizing Network) for mesh. Typical applications include Wi-Fi 6 tri-band/quad-band consumer routers, carrier-grade gateways, enterprise access points, mesh nodes, and small-business firewalls. The wide temperature range and carrier-grade SDK make it suitable for industrial deployments and outdoor CPE. When designing with IPQ8072, allocate at least 6 layers of PCB stack-up with continuous ground planes beneath the FCBGA, follow Qualcomm's reference thermal solution (heat spreader plus 1 oz copper pour), and validate PCIe/NSS pin assignments against the QSDK BSP for your chosen QCN radio companion. Use M.2 or mPCIe slots to attach QCN9074 5 GHz or 6 GHz radio cards. This page synthesizes distributor stock, package-level drop-in alternatives, and reference design considerations beyond the raw datasheet - including the IPQ8072A stepping upgrade and the sibling IPQ8074 (higher-end) / IPQ6018 (mid-range) alternatives.

見積もり お問い合わせ
IR4301MTRPBF - 160W Mono Class D Audio Amplifier | Infineon
IR4301MTRPBF

IR4301MTRPBF - 160W Mono Class D Audio Amplifier | Infineon

The Infineon IR4301MTRPBF is a 1-Channel (Mono) Class D integrated digital audio amplifier that delivers up to 160W into a 4 ohm load from a 22-pin PowerVQFN (5x6 mm) package. The part integrates a PWM controller, a high-voltage gate driver, and two low-RDS(on) MOSFETs into a single multichip module, and it accepts a fully differential or single-ended analog input with no DSP required. According to the Infineon IR4301M datasheet, the device achieves a typical output noise floor of 250 uVrms and operates from a split or single power supply. A Class D audio amplifier is a switching amplifier topology that drives the loudspeaker with pulse-width modulated square waves at hundreds of kHz, then low-passes them in the speaker itself. The IR43x1 family therefore belongs to the audio amplifier IC class of products, which itself sits inside the broader amplifier IC and integrated circuit hierarchy. Compared with classic linear (Class AB) amplifiers, Class D designs reach efficiencies above 90 percent, which lets the IR4301M deliver high peak music power without a mechanical heatsink in typical music playback use. Key features include integrated analog input with no MCU code required, high peak music power output, no mechanical heatsink requirement, split or single supply operation, and differential or single-ended input. Integrated protections cover over-current, over-temperature, and under-voltage conditions. The 5 mm by 6 mm PQFN22 footprint exposes the die to a thermal pad that conducts waste heat to the PCB copper, which is the primary cooling path in compact audio products. The IR4301M multichip module uses an optimized co-packed MOSFET pair driven by a dedicated controller, so the gate drive and dead time are matched to the output stage. High voltage ratings and noise immunity in the controller IC ensure reliable operation over a wide range of environmental conditions. The amplifier is specified for industrial temperature grade and supports both bridge-tied-load and single-ended output configurations through the same pinout. Typical applications include soundbars, subwoofers, mini-component stereo systems, portable Bluetooth speakers, and integrated active speaker modules. The device is also used in automotive aftermarket amplifiers and pro-sumer desktop audio. Designers choose this part when they need a small, thermally friendly mono Class D stage that can be driven directly from an analog audio source. When designing with the IR4301M, place the LC output filter components close to the device and provide a substantial copper pour on the exposed pad to dissipate the idle losses. The datasheet recommends a ferrite-core inductor around 10 to 22 uH and an X7R film or ceramic filter capacitor matched to the load impedance. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone. The IR43x1 family covers the IR4301M, IR4311M, and IR4321M, which differ mainly in output power and supply voltage rating.

見積もり お問い合わせ
IR4302MTRPBF - 2-Ch Class D 130W Stereo Amp | Infineon
IR4302MTRPBF

IR4302MTRPBF - 2-Ch Class D 130W Stereo Amp | Infineon

The Infineon IR4302MTRPBF is a 2-channel integrated analog-input Class D audio amplifier IC that combines a dual-channel PWM controller, a high-voltage gate driver, and four low-RDS(on) digital audio MOSFETs in a single 44-pin PQFN (7x7 mm) package. According to manufacturer datasheet, it delivers up to 130 W peak music output per channel into 4 ohm loads, operates from a split or single ±21 V (or single 10 V to 42 V) supply, and provides differential or single-ended analog inputs. Differential analog noise floor is specified at 250 uVrms, and the part integrates standard Class D protections including over-current, over-temperature, and under-voltage lockout. A Class D audio amplifier is a switching-mode power amplifier that uses pulse-width modulation (PWM) at hundreds of kHz to drive the output stage, achieving efficiencies typically above 90% - compared with 50-65% for Class AB designs - by ensuring the output transistors are either fully on or fully off. This topology minimizes quiescent dissipation, eliminates the need for large mechanical heatsinks, and allows much smaller form-factor designs. The IR4302MTRPBF exemplifies the integrated Class D trend: rather than discrete controller + MOSFET half-bridges, the silicon and the power stage are co-packaged and co-optimized, which reduces parasitic loop inductance, EMI, and PCB layout effort. Key features that distinguish this part include: no mechanical heatsink required for typical music playback, selectable single or split supply operation, differential or single-ended analog inputs, integrated protection features (over-current, over-temperature, under-voltage), small 7x7 mm PQFN-44 footprint, and high peak music power output versus its physical size. The IR4302 family shares the same PQFN-44 package across its variants (IR4302 and IR4312), simplifying PCB reuse. Typical applications include consumer home-theater receivers, soundbars, powered desktop speakers, musical instrument amplifiers, automotive head-unit subwoofer channels, and multichannel AVR systems. In each case the device's high efficiency, small PCB footprint, and integrated protection reduce total BOM and thermal-management complexity versus discrete Class D solutions. Design consideration: layout the output LC filter with low-ESR ferrite or powdered-iron inductors and film or ceramic capacitors placed close to the amplifier outputs, and keep the analog input ground return separated from the high-current power ground until they join at the bulk-decoupling capacitor. Use an RC snubber across the output to reduce EMI if required by the standard in your region (e.g., FCC Part 15, EN55032). This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

見積もり お問い合わせ
IRS20124C Audio Digital Driver IC | Infineon
IRS20124C

IRS20124C Audio Digital Driver IC | Infineon

Infineon Technologies IRS20124C is an integrated-circuit audio digital driver described by the verified distributor data as “IC AUDIO DVR DGTL HI/LO DIE.” The device is listed by DigiKey as an audio channel device and is positioned for digital audio signal-driving applications. Its verified package, channel count, electrical ratings, timing characteristics, thermal limits, and exact pin assignments are not included in the supplied records, so those details remain identified as data-needed rather than inferred. An audio digital driver is a signal-path integrated circuit, or interface IC, that converts or conditions digital-audio signals for connection to downstream audio circuitry. In the broader hierarchy, it belongs to digital signal conditioning, then interface ICs, then semiconductor components. Compared with a passive line driver, an integrated audio driver can consolidate multiple digital channels and associated protection or interface functions, but its exact implementation must be confirmed from the manufacturer datasheet. The verified data specifically identifies the IRS20124C as an audio special-purpose device with high-side and low-side digital drive circuitry. This description suggests that the part is intended to provide controlled digital output behavior rather than serving as an analog audio amplifier. The distributor wording also references “die,” but it does not disclose die dimensions, process technology, clocking requirements, or isolation details. Potential uses include digital audio links, audio equipment, powered speaker or headphone systems, and other systems requiring a dedicated audio digital-drive interface. The correct application cannot be finalized without the electrical limits, package drawing, logic thresholds, timing, and pinout. Engineers should compare those verified values against the target system before selecting the part. When integrating the IRS20124C, verify supply voltage, input and output logic levels, propagation delay, channel configuration, and exposed-pad requirements in the manufacturer documentation. Do not assume SOIC, QFN, leadless, or other package options solely from the suffix. Distributor ECAD records can contain multiple package interpretations, making the exact manufacturer part document controlling. This page consolidates distributor classification, sourcing links, and the precise limitations of the available records. It deliberately avoids invented electrical specifications, package assumptions, pricing, pin assignments, or replacement claims while identifying what must be obtained before design release.

見積もり お問い合わせ
IRS20124CD - 200V Digital Audio Driver | Infineon
IRS20124CD

IRS20124CD - 200V Digital Audio Driver | Infineon

Infineon Technologies IRS20124CD is a digital audio driver IC designed for Class D amplifier output stages, with verified source information identifying a 200 V high-voltage rating and support for programmable dead-time generation. It is associated with the IRS20124S family, whose manufacturer description identifies integrated dead-time generation and bidirectional over-current sensing for simplified output-stage design. The device is intended to drive discrete power transistors rather than directly delivering loudspeaker current, making external MOSFET or IGBT selection an important part of amplifier design. A digital audio driver is a gate-drive IC used between a Class D controller and the power switching transistors in an audio amplifier. It translates control signals into high-voltage gate drive, manages timing between complementary switching devices, and can provide protection functions. This places the IRS20124CD in the broader power-management and audio-amplifier hierarchy: Class D amplifier controller, digital audio driver, discrete power stage, loudspeaker output. The verified family information highlights programmable dead-time through the DT/SD pin, allowing external resistor-based timing adjustment with only two external resistors. Proper dead-time prevents simultaneous conduction in the complementary output devices, while bidirectional over-current sensing helps the amplifier react to abnormal output-stage conditions. These features are central to designing a robust discrete switching stage rather than relying on uncontrolled gate timing. The IRS20124CD is associated with up to 1000 W output-power capability in Class D audio applications according to the supplied IRS20124S family source snippet. The exact electrical ratings, thermal limits, package dimensions, and pin assignments for the CD suffix were not present in the verified data, so those values must be confirmed against the Infineon manufacturer datasheet before layout or production use. The family is particularly relevant to powered speakers, subwoofers, PA systems, and automotive or industrial audio equipment where a discrete MOSFET output stage is preferred. Designers should treat the IRS20124CD as a high-voltage gate driver, not as a complete audio amplifier. External switching transistors, DC-link voltage, current sensing, dead-time components, gate resistors, heat sinking, and output filtering must be designed together. The family’s programmable dead-time and bidirectional current sensing reduce control complexity, but exact component values and protection thresholds require the manufacturer datasheet. This page distinguishes verified family-level information from CD-suffix-specific data that is unavailable in the supplied results. It also emphasizes practical selection criteria, including package confirmation, voltage rating, gate-drive compatibility, current limits, thermal performance, and amplifier topology before treating any substitute as a true drop-in replacement.

見積もり お問い合わせ
IRS2052MTRPBF - 2-Ch 200V Class D Audio Driver | Infineon
IRS2052MTRPBF

IRS2052MTRPBF - 2-Ch 200V Class D Audio Driver | Infineon

The Infineon IRS2052MTRPBF is a 2-channel (stereo) high-voltage Class D audio amplifier driver IC integrating dual PWM modulators, gate drivers, and comprehensive protection features in a 48-pin MLPQ (7x7 mm) package. It supports an analog audio input and drives external complementary power MOSFETs in a half-bridge or full-bridge output stage, delivering high-efficiency amplification suitable for subwoofer, two-channel, and bridge-tied load (BTL) Class D topologies. A Class D audio amplifier is a switching amplifier topology that uses pulse-width modulation (PWM) to drive the output stage fully on or fully off, dramatically reducing power dissipation compared to a linear (Class A/B) amplifier. The IRS2052M occupies the 'controller + gate driver' layer of the audio amplifier hierarchy (Class D controller -> audio amplifier -> amplifier IC -> signal chain IC -> semiconductor), making it the brain and gate-drive interface between the analog audio front end and the high-current MOSFET output stage. Key features include a 200 V high-voltage rating (suitable for ±100 V rails), programmable dead-time, integrated over-current and over-temperature protection, clipping detection output for dynamic speaker management, and a versatile shutdown control that supports latched, non-latched, or host-controlled modes. The IRS2052M operates from a logic supply and a high-voltage bootstrap supply, enabling self-powered gate drive for the high-side MOSFETs of each half-bridge. The device integrates proprietary PWM modulation with adjustable switching frequency (typically 400 kHz to 800 kHz range) to balance audio band noise rejection against switching losses. An external thermal sensor input allows system-level thermal monitoring beyond the on-chip thermal shutdown, critical in space-constrained multi-channel amplifiers and automotive audio systems. Typical applications include powered subwoofers, home theater receivers, automotive head units and external amplifiers, professional powered speakers, and marine/PA systems. Its 200 V rating enables high-power designs (several hundred watts per channel) with appropriate output MOSFET selection and output filter design. When designing with the IRS2052M, prioritize gate-drive loop layout to minimize parasitic inductance on the high-current path, and carefully select bootstrap capacitor values based on switching frequency and high-side MOSFET gate charge. Always pair the IRS2052M with logic-level or standard-threshold MOSFETs whose total gate charge supports the programmed switching frequency without exceeding the IC's drive capability. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ
IRS2053MPBF - 3-Channel 6.2W Class-D Amplifier | Infineon
IRS2053MPBF

IRS2053MPBF - 3-Channel 6.2W Class-D Amplifier | Infineon

The Infineon Technologies IRS2053MPBF is a three-channel Class-D digital audio power amplifier rated for a 10 V to 15 V supply and 6.2 W output power, housed in a 48-pin MLPQ package measuring 7 mm by 7 mm. It integrates the modulator, power-stage, and protection functions needed to drive three audio channels efficiently. Programmable bidirectional current sensing protects the high-side and low-side MOSFETs from overcurrent conditions. Its surface-mount MLPQ construction supports compact Class-D audio systems where reduced board area and efficient power conversion are important. A Class-D audio amplifier is a switching power amplifier that uses pulse-width modulation to represent an audio waveform. Unlike a linear audio amplifier, it spends less time between the positive and negative supply rails, improving power-conversion efficiency and reducing heat in many listening-power applications. The IRS2053MPBF sits within the hierarchy of audio amplifiers, power amplifiers, switching amplifiers, and power-management semiconductors. The verified product information identifies three amplification channels, Class-D operation, a 6.2 W output-power rating, and a 10 V to 15 V supply-voltage range. Its integrated current-sensing function is a key protection feature for the output power stage. The small MLPQ48 package is specifically associated with the smaller physical footprint made possible by Class-D topology, although exact output power per channel, efficiency, modulation frequency, thermal resistance, and load limits require confirmation from the manufacturer datasheet. Typical uses include compact powered speakers, multimedia speaker systems, consumer audio equipment, and other multi-channel sound systems powered from a 10 V to 15 V source. A three-channel device is useful when one board must drive multiple speakers or separate audio zones. System designers should account for supply headroom, speaker impedance, filtering, amplifier stability, PCB thermal performance, and the protection requirements of each output stage. For layout, the exposed thermal and electrical features of the MLPQ package require careful copper and via treatment according to the manufacturer recommendations. The audio output filter should be selected for the switching characteristics and load, while input and supply routing should be kept compact. Because verified thermal, frequency, protection-delay, and electrical-limit details are unavailable in the supplied excerpts, those values must be checked against the complete manufacturer datasheet before release to production. This page consolidates the verified distributor and datasheet-index information, separates confirmed specifications from missing technical data, and provides practical guidance for evaluating this amplifier. It does not infer substitute pinouts or claim drop-in compatibility without manufacturer or web evidence.

見積もり お問い合わせ
IRS2053MTRPBF 3-Ch 10-15V 6.2W Class D Driver | Infineon
IRS2053MTRPBF

IRS2053MTRPBF 3-Ch 10-15V 6.2W Class D Driver | Infineon

The Infineon IRS2053MTRPBF is a three-channel, high-performance Class D audio amplifier driver with integrated PWM modulators and protection, designed for a 10 V to 15 V supply and a 48-pin MLPQ (7 x 7 mm) package. The verified data identifies it as a 3-channel device associated with 6.2 W output and 60 dB gain, making it suitable for external-MOSFET automotive audio power stages. Its 0.50 mm package pitch supports compact layouts, while its -40 °C to 125 °C operating range addresses harsh automotive environments. The device is RoHS compliant according to the provided source. A Class D audio driver is a controller or gate-drive device that uses pulse-width modulation to drive external power MOSFETs in an audio half-bridge or full-bridge output stage. Unlike a conventional linear audio amplifier, the switching output stage can deliver audio with lower power dissipation than a comparable linear stage, although EMI filtering and careful layout remain important. The IRS2053 integrates three channels so a complete three-channel amplifier can be formed with external MOSFETs and passive components. Key verified features include three audio channels, a 10 V to 15 V supply range, 6.2 W output capability in the cited series description, 60 dB gain, a 48-MLPQ package measuring 7 x 7 mm, and 0.50 mm pitch. The package also has an exposed pad according to the supplied product-page description. The -40 °C to 125 °C temperature range supports automotive and industrial audio systems, while RoHS compliance supports regulated manufacturing and product-environment requirements. The IRS2053 uses floating analog inputs and a protection-control interface intended for external MOSFET half-bridge stages. In implementation, the three PWM outputs drive external power devices, while input conditioning, gate resistors, supply decoupling, output filtering, and protection components complete the power stage. Exact output power, modulation details, pin names, current limits, and timing values were not included in the provided verified data and must be confirmed in the manufacturer datasheet before layout or production use. Typical applications include automotive head units, three-channel infotainment systems, seat or console audio, and compact external Class D power modules. A three-channel arrangement can support front left, front right, and a center, subwoofer, or rear channel, depending on the amplifier architecture. The 10 V to 15 V supply range is suitable for automotive battery-derived rails after suitable regulation and filtering, but the exact automotive transient and operating requirements are not provided here. Designers should follow the manufacturer datasheet for exposed-pad thermal design, input filtering, power-supply decoupling, MOSFET selection, gate-loop layout, EMI control, and protection configuration. Because the provided data does not include complete pin-level definitions or verified electrical limits, no pin-level substitute should be assumed merely because it uses a nominally similar package.

見積もり お問い合わせ
IRS2092PBF - 500W Protected Class D Driver | Infineon
IRS2092PBF

IRS2092PBF - 500W Protected Class D Driver | Infineon

The Infineon Technologies IRS2092PBF is a protected, high-voltage, mono Class D audio amplifier driver with an integrated PWM modulator, operating from a 10 V to 18 V supply and supporting a 500 W audio power stage. It is packaged in a 16-lead PDIP package and requires two external MOSFETs plus a few external components to realize a complete protected Class D power amplifier. A Class D audio amplifier driver is a controller for a switching audio power stage. It accepts an analog audio signal, generates the required PWM drive signals, and controls external power transistors that deliver current efficiently to a loudspeaker. Within the power-management and audio hierarchy, the IRS2092 sits between the audio source and discrete output MOSFETs rather than directly driving a speaker. Key features include a high-voltage, high-performance Class D architecture, integrated PWM modulation, floating inputs for straightforward half-bridge implementation, and programmable bidirectional over-current protection. The 16-lead PDIP package supports through-hole assembly. The verified distributor listing identifies the device as a one-channel mono Class D amplifier IC and describes its operating supply as 10 V to 18 V. The device is intended for high-power audio systems where external power MOSFETs provide the speaker current. Its modulator determines the switching command delivered to those devices, while the protection function helps prevent excessive current during abnormal output conditions. The exact output-power conditions, switching frequency, propagation delay, quiescent current, and thermal limits were not supplied in the retrieved data and should be confirmed from the manufacturer datasheet before final design release. Typical uses include mono subwoofer amplifiers, professional audio power stages, high-current speaker drivers, and compact Class D amplifier modules. The architecture is particularly relevant where a bridge-tied half-bridge output is desired and where two external MOSFETs are acceptable. Designers should treat MOSFET selection, gate-loop layout, heat-sink sizing, dead time, output filtering, and protection thresholds as system-level engineering tasks. The driver IC does not eliminate the need for a correctly rated power stage, and its published 500 W capability is not an all-load guarantee. This page combines verified distributor specifications, datasheet links, replacement-screening constraints, and practical implementation guidance. It distinguishes confirmed IRS2092PBF facts from parameters that remain unavailable in the supplied source set.

見積もり お問い合わせ
IRS2092SPBF - Protected 100V Class-D Driver | Infineon
IRS2092SPBF

IRS2092SPBF - Protected 100V Class-D Driver | Infineon

The Infineon Technologies IRS2092SPBF is a protected, high-voltage, mono Class-D audio amplifier driver rated for a 100 V maximum supply and 500 ns gate-drive timing, integrated with an 800 kHz PWM modulator and protection functions. It is packaged in a narrow 16-lead SOIC. The device works with two external power MOSFETs and a small number of passive components to implement a complete protected Class-D audio power stage. A Class-D audio amplifier driver is a specialized gate-drive IC that converts an analog audio input into high-frequency PWM signals for external half-bridge MOSFETs. The IRS2092SPBF belongs to the audio-amplifier-driver hierarchy, combining modulator, gate-driver, and protection functions in one controller. Unlike a finished audio output amplifier, it requires external power transistors, gate resistors, passive networks, and an appropriate output filter. The verified product information identifies the device as a mono, analog-input Class-D amplifier with digital audio amplification behavior. Its stated 100 V voltage class, 500 ns timing value, and 800 kHz associated switching specification are useful for evaluating gate-drive bandwidth and system architecture. The integrated protection is intended to improve robustness in external-MOSFET audio power stages, although exact protection thresholds and conditions must be confirmed from the manufacturer datasheet. Typical uses include compact stereo or multichannel audio systems, powered speakers, automotive audio infrastructure, home-theater equipment, and industrial audio products. The device is most appropriate when the designer wants controller-level flexibility with discrete MOSFET selection rather than a fixed integrated power amplifier. The 16-SOIC package also makes it compatible with conventional surface-mount PCB assembly processes. A critical design consideration is that controller ratings do not determine the final speaker power. Output power depends on external MOSFET selection, supply voltage, modulation strategy, output filter, transformer or speaker impedance, and thermal design. Use the manufacturer datasheet and application circuits for gate-drive timing, dead-time behavior, fault handling, bootstrap or high-side supply requirements, and PCB layout. This product record consolidates the verified manufacturer and distributor descriptions with practical application guidance and explicitly identifies parameters that require confirmation before layout or production release.

見積もり お問い合わせ
IRS2092STRPBF - 200V Mono Class D Audio Driver | Infineon
IRS2092STRPBF

IRS2092STRPBF - 200V Mono Class D Audio Driver | Infineon

Infineon Technologies IRS2092STRPBF is a high-voltage, high-performance mono Class D audio amplifier driver with an integrated PWM modulator and protection functions. It operates from a 200 V supply according to the Mouser product listing, uses an integrated analog input, and drives external MOSFETs to form a complete audio power stage. The device is packaged in a narrow 16-lead SOIC. Its architecture supports floating inputs for convenient half-bridge implementation, programmable bidirectional over-current protection with self-reset, and programmable preset deadtime. These characteristics position the IRS2092STRPBF as a gate-driver-class audio IC rather than a conventional line-output amplifier: it accepts a low-level audio signal and controls the switching of external power MOSFETs that deliver energy to a loudspeaker. The external MOSFET selection remains central to output power, switching loss, and thermal performance. Use the manufacturer datasheet for the complete electrical limits, truth tables, timing characteristics, protection behavior, pin descriptions, and recommended application circuit. The supplied search results also identify the device as a 16-SOIC, single-channel Class D amplifier driver and describe the IRS2092 family as intended for high-voltage audio systems. In a typical implementation, the IRS2092STRPBF drives a self-oscillating or externally controlled half-bridge stage, while protection logic helps contain overload conditions. Board layout, gate-loop layout, and the high-voltage power stage deserve careful review because the driver interfaces directly with fast-switching external MOSFETs.

見積もり お問い合わせ