集積回路

M4A5-64/32-7JI

M4A5-64/32-7JI - ispMACH 4A 64-Macrocell 5V CPLD | Lattice

The Lattice Semiconductor M4A5-64/32-7JI is a 64-macrocell, 32-user-I/O member of the ispMACH 4A family of high-performance E2CMOS 5-V in-system programmable complex programmable logic devices (CPLDs), supplied in a 44-pin Plastic Leaded Chip Carrier (PLCC) package with surface-mount J-leads. It offers 2.5K usable gates, 7.5 ns typical propagation delay (tpd), and an internal operating frequency up to 125 MHz, making it one of the fastest 5-V CPLDs of its generation. A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic device that combines multiple PAL/GAL-style macrocell blocks with a central interconnect matrix, providing deterministic, single-clock-cycle logic with predictable timing. CPLDs sit below FPGAs in the programmable logic hierarchy: they offer fewer gates than FPGAs but provide instant-on operation, superior pin-to-pin timing consistency, and robust 5-V I/O tolerance, which is why they remain preferred for glue logic, bus interfacing, and power-sequencing tasks. Key features include 100% pin-out retention, 100% macrocell utilization, in-system programmability via IEEE 1532 / JTAG, four 36-input PAL blocks with 16 macrocells each, and a global routing pool that delivers fast, predictable signal propagation. The 5-V tolerant I/Os simplify interfacing to legacy TTL/CMOS buses without level shifters. The ispMACH 4A architecture uses Lattice's E2CMOS process with non-volatile storage of the configuration, so the device powers up in a known functional state with no external boot PROM. The four-block, single-pool interconnect fabric delivers uniform 7.5 ns pin-to-pin delays across all I/O combinations. Typical applications include address decoding and bus interfacing in 5-V industrial controllers, glue logic between microprocessors and peripherals, power-supply sequencing logic, and legacy system upgrades that require drop-in 5-V programmable logic with JTAG in-field reprogrammability. When designing with the M4A5-64/32-7JI, observe the 4.75 V to 5.25 V supply range and place 0.1 uF decoupling capacitors adjacent to every VCC pin. Because the part is in-system programmable, expose TDI, TDO, TMS, and TCK to a JTAG header for field updates. This page synthesizes distributor inventory, drop-in alternatives, and practical design notes for engineers migrating away from the obsolete original Lattice part number.

見積もりお問い合わせ

M4T28-BR12SH1

M4T28-BR12SH1 - 48mAh SNAPHAT Lithium Battery + 32.768 kHz Crystal | STMicroelectronics

The STMicroelectronics M4T28-BR12SH1 is a SNAPHAT® top battery-and-crystal module that delivers 48 mAh of lithium backup capacity at 2.8 V with an integrated 32.768 kHz quartz crystal (12.5 pF load), purpose-built as the detachable power source for ST's TIMEKEEPER® series of serial real-time clocks and non-volatile SRAM/Supervisor ICs housed in 28- and 44-pin surface-mount SOIC packages. The SNAPHAT design lets the lithium cell and crystal be snapped onto an SOIC base after reflow, keeping the battery off the board during high-temperature assembly and giving the end product years of battery-backed RTC retention. A lithium coin-cell backup battery is a primary (non-rechargeable) lithium cell that keeps volatile memory and real-time clock registers alive when the system main rail collapses; for non-volatile SRAM supervisors and RTCs it sits in the same supply hierarchy as a coin cell, a supercap-backed supply, and a buck/boost hold-up rail. In the TIMEKEEPER family the SNAPHAT module also carries the 32.768 kHz tuning-fork crystal so that the combined Battery+Crystal pair forms a complete timekeeping sub-assembly — the IC underneath just exposes a top-of-package cavity that the SNAPHAT clips into. Key features include a 48 mAh nominal capacity with lithium chemistry (long-shelf-life primary cell), an integrated 32.768 kHz crystal specified for 12.5 pF load capacitance, a typical operating voltage of 2.8 V and a detachable SNAPHAT housing that allows board-level assembly of the SOIC base before the lithium part is added. ST publishes a multi-year backup time figure and an estimated self-discharge shelf life at +25 °C so the engineer can size RTC retention against product life. Inside the SNAPHAT housing, the lithium coin cell is connected through the SOIC pinout's Vbat/RET pins while the crystal ties to the RTC's oscillator pins; the SNAPHAT body itself provides the mechanical alignment and the battery contact springs. Because the same SNAPHAT accepts both M4T28-BR12SH1 and M4T32-BR12SH1 variants, the top is reusable across ST's 28- and 44-pin TIMEKEEPERS with no board change. Typical applications are RTC + NVRAM backup in industrial controllers, point-of-sale terminals, metering and data-logging equipment, medical instruments needing tamper-proof time, and any system where the lithium cell must be replaced without re-flowing the base SOIC IC. The M4T28-BR12SH1 is the matching SNAPHAT for the M48T201, M48T58, M48T35 and M48T08/18 TIMEKEEPER family. Design consideration: do not expose the SNAPHAT to reflow temperatures above +220 °C — it must be snapped on only after the SOIC base has been soldered. Storage below +30 °C and low humidity extends shelf life, and polarity on the SNAPHAT must match the SOIC base markings to avoid reverse-charging the lithium cell. This page consolidates distributor pricing, exact SNAPHAT specifications, drop-in alternatives from the M4Txx-BR12SH family, and design guidance that supplements the STMicroelectronics datasheet — synthesized for engineers who must select, source, and qualify a TIMEKEEPER battery+crystal module quickly.

見積もりお問い合わせ

M5241L

M5241L - Dual VCA Electronic Volume Control IC | Mitsubishi

The Mitsubishi M5241L is a dual voltage-controlled amplifier (VCA) integrated circuit designed for electronic volume control in consumer audio equipment. Housed in a SIP-9 (single inline package) module, the part provides two independent VCA channels with logarithmic control characteristics suitable for stereo audio attenuator applications. The M5241L is a mature legacy part used in pre-amplifier stages, mixer consoles, and audio-visual receivers where DC-controlled gain replaces mechanical potentiometers. A VCA (voltage-controlled amplifier) is an analog gain stage whose attenuation is set by an external DC control voltage rather than by a mechanical pot. In a typical audio chain (source -> preamp -> VCA -> power amp -> speaker), the VCA sits between the preamp and power amp and accepts a control voltage from a microcontroller or volume encoder. The M5241L integrates two such gain cells into one package, allowing a single IC to perform stereo volume control while keeping channel-to-channel gain tracking tight. Within the broader component taxonomy, the M5241L is a linear analog IC -> audio IC -> VCA -> consumer audio subsystem. Key features of the M5241L include dual-channel architecture with matched gain curves, a logarithmic dB-attenuation control law for perceptually linear volume response, DC voltage gain control eliminating mechanical noise and wear, and a wide supply range suited to +/-12 V to +/-15 V analog rails found in legacy hi-fi designs. The device is well-suited to replacing mechanical volume pots with motorized or electronic alternatives. Technically, the M5241L uses bipolar transistor gain cells with a Gilbert-multiplier style control element, which provides good channel matching and low distortion in the audio band. Its control port accepts a DC voltage referenced to ground; higher control voltage produces less attenuation. The internal reference is designed for stereo matching, so designers typically drive both channels from the same control source. Typical applications include AV receiver volume control, karaoke mixer consoles, electronic crossover networks, MIDI-controlled guitar amplifiers, and automotive head unit audio stages. It is also used in legacy Roland synthesizer modules and in industrial audio distribution amplifiers where remote or software-driven volume is needed. When designing with the M5241L, observe proper supply decoupling at each supply pin and route the audio signal traces away from the DC control traces to avoid crosstalk into the signal path. The control input impedance is relatively high, so a simple RC filter on the control line is usually sufficient to remove PWM artifacts from a digital volume encoder. This page synthesizes distributor stock, parametric substitutes, and practical design notes that go beyond the manufacturer datasheet, including cross-brand replacement guidance and a stereo application checklist for engineers maintaining vintage audio designs.

見積もりお問い合わせ

M58BW32FB5T3F

M58BW32FB5T3F - 32Mbit 3.3V NOR Flash, 55ns | Micron

The Micron Technology M58BW32FB5T3F is a 32Mbit parallel NOR Flash memory IC organized as 1M x 32 bits, operating from a single 3.3V supply with a 55 ns access time, housed in an 80-pin PQFP (14x20 mm) package. It is the automotive-grade variant of the M58BW32F family, qualified to AEC-Q100 for use in vehicular and harsh-environment electronic systems. A parallel NOR Flash memory is a nonvolatile semiconductor memory in which memory cells are connected in parallel, allowing random access to any address directly. In the memory hierarchy, NOR Flash sits alongside DRAM, NAND Flash, and EEPROM within the broader flash memory and solid-state storage category. Unlike NAND Flash, NOR Flash supports execute-in-place (XIP), making it the standard choice for storing boot code, firmware, and parameter tables in embedded processors and microcontroller systems. Key features of the M58BW32FB5T3F include the 32Mbit (1M x 32-bit) organization on a 16-bit/32-bit parallel data bus, a fast 55 ns read access time that eliminates the need for processor wait states in many designs, and a single 3.3V supply that simplifies power rail design. The boot block architecture allows protected small sectors at the bottom of the array for reset and exception vectors, while larger sectors store application firmware. Technically, the device belongs to the 16Mb/32Mb 3.3V burst-mode parallel NOR Flash family originally developed by STMicroelectronics and later manufactured by Micron Technology. It supports asynchronous page read as well as burst read modes synchronized to an external clock, enabling high-throughput code fetch for high-performance CPUs. Standard command-set programming and block erase operations are controlled via the memory command interface, with status polled through dedicated signals. Typical applications include automotive telematics and infotainment boot storage, industrial control modules requiring firmware retention, and networking equipment storing configuration images. The AEC-Q100 qualification and temperature-grade ordering suffix (3F) target under-hood and harsh-environment deployments. Design consideration: verify burst-clock timing and wait-state configuration against the 55 ns access time, and respect the sector-erase endurance ratings in firmware update schemes. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, with specifications verified against Micron and distributor data as of 2026-09-05.

見積もりお問い合わせ

M68LC302CAF20VCT-FR

M68LC302CAF20VCT-FR - 20MHz M68000 MPU w/ CPM, 100-LQFP | NXP

The NXP M68LC302CAF20VCT-FR is a 20 MHz integrated M68000 microprocessor that combines the MC68000 core with the Communications Processor Module (CPM), supplied in a 100-pin LQFP (14x14 mm) package. The low-cost LC variant omits the cryptographic coprocessor that distinguishes the MC68302, retaining the dual M-Bus/SCC serial channels, three parallel ports, and DMA channels that made the MC68302 family the canonical one-chip networking and communications processor of the early 1990s. The 20 MHz bus clock delivers approximately 2.7 MIPS sustained performance, suitable for embedded routers, X.25/PAD controllers, and industrial serial concentrators. A MPU (Microprocessor Unit) is the master execution engine of an embedded system; in this ColdFire M68000 family, it forms the heart of a printed-circuit assembly alongside external memory and peripherals. The M68LC302 sits at the top of a typical hierarchy: MPU -> microprocessor -> processor -> digital IC -> semiconductor. The integrated CPM (Communications Processor Module) is the architectural innovation of the 68302 line, offloading HDLC/SDLC framing, UART, transparent bisync, and DMA from the 68000 core, allowing the CPU to focus on protocol stack and management tasks. The 'C' suffix denotes the 5V core, the 'AF' indicates the LQFP package, '20' specifies 20 MHz operation, 'VC' marks plastic LQFP with operating temperature -40C to +85C, and 'T-FR' is the lead-free tray shipping option. Key features include 1.1K bytes of internal dual-port RAM for descriptor tables, three independent full-duplex serial channels (two SCC plus one SMC), seven DMA channels, a 16-bit parallel I/O port, and a 24-bit address bus supporting up to 16 MB of linear memory. The device operates from a single 5V supply and provides a 4-wire serial debug port for background-mode development. The 100-pin LQFP package provides 0.5 mm lead pitch, compatible with standard surface-mount assembly processes. Typical applications include ISDN terminal adapters, X.25 packet assemblers/disassemblers, low-end industrial routers, serial protocol converters, and legacy telecommunications backplanes. Production engineers commonly use the M68LC302 in maintenance-of-way equipment, RTUs, and SCADA serial front ends where the MC68302 software base is preserved but cryptographic hardware is not required. When designing with this device, engineers should note the 5V-only core supply, the lack of on-chip flash (external ROM/EPROM is required), and the importance of bus arbitration when interfacing to external DMA peripherals. Lead-free (T-FR) parts comply with current RoHS soldering profiles and should be used in new designs. The part is no longer recommended for new designs per NXP's product lifecycle page, so long-term availability planning is essential.

見積もりお問い合わせ

M74HC14

M74HC14 - Hex Schmitt Inverter, 6-Channel, CMOS | STMicroelectronics

The STMicroelectronics M74HC14 is a high-speed CMOS hex Schmitt trigger inverter fabricated with silicon-gate C2MOS technology, packaged in 14-pin SOIC, providing six independent inverting buffers with 20% VCC input hysteresis. Each channel delivers a typical propagation delay of 12 ns at VCC = 6 V, balanced symmetrical output impedance with |IOH| = |IOL| = 4 mA minimum drive, and typical quiescent supply current ICC well under LSTTL equivalents while maintaining pin-to-pin compatibility with the M74HC04 non-Schmitt hex inverter. A Schmitt trigger inverter is a digital logic building block that converts a slowly-changing or noisy input waveform into a clean, sharply-transitioning output by using two different switching thresholds: VT+ for the low-to-high transition and VT- for the high-to-low transition. The voltage gap between these thresholds is called hysteresis. Compared with a standard CMOS inverter, a Schmitt trigger is far more tolerant of noisy, slowly-rising, or analog-style input signals, which makes it the standard choice for line receivers, RC oscillators, debounce circuits, and waveform shapers. Within the broader taxonomy, the M74HC14 sits inside the 74HC logic family, which itself belongs to CMOS logic ICs and the wider semiconductor category. Key features include a wide operating voltage range from 2 V to 6 V, 1.2 V typical noise immunity at VCC = 6 V, balanced propagation delays tPLH/tPHL, ESD protection on all inputs, and CMOS-compatible low quiescent current. The Schmitt hysteresis is specified as 20% of VCC, which scales automatically across the supply range, giving reliable switching margins in 3.3 V and 5 V rails alike. The device is built using silicon-gate C2MOS technology, which combines the high-speed LSTTL-class switching performance of bipolar TTL with the low static power consumption inherent to CMOS. Internal diode clamps protect inputs against ESD and latch-up, while the symmetrical output stage provides equal source and sink drive strength so edges remain matched under capacitive loading. Typical applications include waveform shaping and line receivers in industrial control, debounce circuits for mechanical switches and keypads, RC relaxation oscillators for clock generation, monostable and astable multivibrators, and signal conditioning between noisy sensors and downstream logic. Its six channels are common in PCB digital designs for handshake-overs signal lines, sensors, or power-management blocks. When using M74HC14 in oscillator or debounce circuits, choose leakage and hysteresis parameters to balance timing accuracy against power consumption. Input rise/fall times must remain slower than the internal hysteresis response or pulse stretching will distort the output duty cycle. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

見積もりお問い合わせ

M74HCT244B1

M74HCT244B1 - Octal 3-State Bus Buffer, HCT, DIP-20 | STMicroelectronics

The STMicroelectronics M74HCT244B1 is an octal bus buffer with 3-state outputs, fabricated in advanced silicon-gate C2MOS technology and housed in a 20-pin DIP (B1 suffix) through-hole package. The device features two active-low output enable inputs (1OE and 2OE), each governing four bus buffers, with non-inverting data flow from A to Y on each channel. An HCT logic interface — 74HCT — is a high-speed CMOS logic family with TTL-compatible input voltage thresholds (VIH = 2.0 V min, VIL = 0.8 V max) that allows direct interfacing with bipolar TTL outputs while preserving the low power consumption of CMOS. Within the broader taxonomy, the M74HCT244B1 belongs to the buffer/driver category of standard logic ICs (74-series logic > buffer/driver ICs > interface ICs > integrated circuits). This HCT sub-family operates from a single 4.5 V to 5.5 V supply, making it the standard logic choice for 5 V digital systems that must bridge CMOS controllers with legacy TTL peripherals. Key features include a typical propagation delay of 12 ns at VdM8 = 5 V, low quiescent supply current (ICC of 4 µA max per channel), 6 mA standard output drive, and ±20 mA balanced output drive capability at 5 V. All inputs include protection circuits against static discharge and transient excess voltage, and the device is specified over the commercial 0 °C to +70 °C operating temperature range (B1 suffix), with a -40 °C to +85 °C industrial variant (B1R suffix) also available from STMicroelectronics. The C2MOS silicon-gate process yields low power dissipation (ICC quiescent of 80 µA max for the whole IC) while delivering CMOS-equivalent speed. Typical applications include memory and address bus buffering in microprocessor systems, peripheral interface drivers for 5 V logic, LED display driving, and general-purpose bus isolation in industrial control and instrumentation. Two active-low output enables let designers independently disable the upper and lower nibbles, which is convenient for 8-bit bus demultiplexing or for tri-state bus sharing among multiple masters. When designing with this part, place a 0.1 µF decoupling capacitor as close as possible to VCC pin 20 to suppress switching transients, and ensure both 1OE and 2OE are tied high through pull-ups if always-enabled operation is desired. The DIP-20 footprint remains popular for through-hole prototyping and legacy board retrofits, while the surface-mount M74HCT244M1R (SO-20) variant serves modern SMT designs. This page synthesizes STMicroelectronics datasheet parameters, distributor pricing, drop-in 74HCT244 equivalents from ST/TI/onsemi/NXP, and practical design notes not bundled in a single distributor listing.

見積もりお問い合わせ

M74HCT273B1R

M74HCT273B1R - 8-Bit D-Type Flip-Flop with Clear, DIP-20 | STMicroelectronics

The STMicroelectronics M74HCT273B1R is an octal D-type flip-flop with master reset (clear), eight positive-edge-triggered D-type storage latches, and TTL-compatible HCT-series CMOS inputs, housed in a 20-pin PDIP (0.300 inch / 7.62 mm) through-hole package. It is specified for a 4.5 V to 5.5 V supply range, delivers a typical maximum clock frequency of 80 MHz at VCC = 4.5 V, and provides non-inverted (true) Q outputs with a maximum propagation delay of 30 ns. An octal D-type flip-flop is a synchronous digital storage element which captures logic levels on eight parallel D inputs at the rising edge of a common clock and holds them on eight Q outputs. The 74HCT family combines low-power high-speed CMOS logic with TTL-compatible input thresholds (VIH = 2.0 V minimum), allowing direct interface with 5 V TTL buses without level shifters. The M74HCT273B1R sits in the digital logic IC hierarchy as: flip-flop -> sequential logic -> logic IC -> integrated circuit -> discrete semiconductor category. Its single-bit-wide clocked register function makes it a foundational building block in bus-oriented digital systems. Key features include a common clock and common master reset (active-low CLR) shared by all eight latches, non-inverted Q outputs, complementary CMOS output drive, low quiescent current of 4 uA, and broad compatibility with 74LS273 and 74HCT273 logic families from multiple vendors. The 20-pin PDIP package retains through-hole compatibility with legacy breadboard and socketed designs, while the HCT input stage directly accepts bipolar TTL drive levels. Technically, the device uses high-performance silicon-gate CMOS to deliver fMAX = 80 MHz (typical) at 4.5 V supply with tPLH around 13 ns and tPHL around 17 ns, all while drawing only a few microamperes of quiescent current. The master reset overrides the clock and asynchronously forces all Q outputs low when driven low. Typical applications include address and data latching in microcontroller expansion logic, I/O port expansion with 74HC595-style shift chains (this part is parallel-load, not serial-shift), debounced pushbutton and rotary-synchronous address, and general-purpose register buffering in TTL-based industrial control and instrumentation systems. When designing with this part, ensure the CLR pin is tied high through a pull-up resistor if asynchronous reset is not used, and provide standard 0.1 uF decoupling close to VCC to maintain noise margin in mixed-signal environments. This page synthesizes distributor pricing, drop-in alternatives, and design guidance beyond the manufacturer datasheet alone.

見積もりお問い合わせ

M74VHC1GT50DFT1G

M74VHC1GT50DFT1G - Single Non-Inverting Buffer/Level Shifter | onsemi

The onsemi M74VHC1GT50DFT1G is a single-gate non-inverting CMOS buffer with TTL-compatible inputs, designed as a logic level shifter between low-voltage TTL signals and a higher-voltage CMOS rail. Housed in a 5-pin SC-88A (TSOP-5/SC-70-5/SOT-353) surface-mount package, the part operates from a 1.65 V to 5.5 V VCC supply, delivers a typical propagation delay of 3.5 ns at 5 V, and draws only 1 µA maximum quiescent current at 25 °C. What is a non-inverting buffer / level shifter? It is a single-bit logic device that regenerates an input signal to a full-rail output without inverting its polarity. When TTL logic swings (0.8 V/2.0 V thresholds) must drive a higher-voltage CMOS rail (3.3 V or 5 V), a TTL-to-CMOS level shifter buffer is required; the device sits in the signal chain between an upstream controller and a downstream CMOS load, restoring logic levels and providing isolation. This hierarchy places it under: buffer → line driver → logic IC → integrated circuit → semiconductor. Key features include TTL-compatible input thresholds (VIL = 0.8 V, VIH = 2.0 V when VCC = 5 V), CMOS-compatible outputs (VOH > 0.8·VCC, VOL < 0.1·VCC at rated load), 5 V tolerant inputs with power-down protection on both inputs and outputs, and balanced propagation delays. The part is fabricated with silicon-gate CMOS technology that achieves bipolar-Schottky-TTL-like speed while maintaining CMOS-level quiescent dissipation. The SC-88A/TSOP-5 footprint occupies only ~2.0 mm × 2.1 mm of board area. Typical applications include interfacing 5 V TTL peripherals to 3.3 V or 2.5 V CMOS logic domains, signal conditioning in mixed-voltage microcontroller designs, and clock or single-line data buffering in portable, industrial, and consumer systems. Designers select this part when board space is constrained and a true single-gate buffer is required without the overhead of multi-channel drivers. A primary design consideration is input-edge speed: although the device accepts slow TTL edges, the output rise/fall time depends on the load capacitance and VCC. Decouple VCC with a 0.1 µF ceramic capacitor placed as close as possible to pin 5, and avoid driving large capacitive loads without a series damping resistor. This page synthesizes distributor pricing, drop-in same-package alternatives from onsemi and competing vendors, and practical design notes that go beyond the manufacturer datasheet summary.

見積もりお問い合わせ

M7AFS600-1FG256

M7AFS600-1FG256 - Fusion FPGA 600K Gates 256-FBGA | Microchip

The Microchip Technology (formerly Microsemi) M7AFS600-1FG256 is a Fusion family mixed-signal FPGA offering 600K system gates, an embedded ARM CoreMP7 soft processor core, and 1.5V core operation, housed in a 256-ball Fine-Pitch Ball Grid Array (FBGA/LBGA) package. The device is fabricated on a 130nm flash-based process and provides 110592 bits of embedded flash configuration memory on-chip. A field-programmable gate array (FPGA) is a semiconductor device containing a matrix of configurable logic blocks (CLBs) interconnected by programmable routing, allowing designers to implement custom digital circuits without fabricating an ASIC. Within the programmable logic hierarchy, the Fusion family occupies the mixed-signal FPGA tier, adding analog peripherals such as on-chip flash memory, analog-to-digital conversion, and power-management support to standard digital fabric, positioning it as an alternative to mixed-signal ASIC or discrete analog-plus-FPGA solutions. Key features of the M7AFS600-1FG256 include 600K system gates of flash-based programmable logic, an integrated ARM CoreMP7 32-bit processor core, 119 user I/O pins available in the 256-ball package, and core supply voltage of 1.5V (valid operating range 1.425V to 1.575V per distributor data). Flash-based configuration means the device is inherently single-chip, non-volatile, and instant-on at power-up, unlike SRAM FPGAs that require external configuration memory. The Fusion architecture integrates programmable analog blocks supporting power management, smart battery charging, clock generation and management, and motor control functions that previously required discrete analog components. The ARM CoreMP7 core allows embedded software to coexist with hardware logic, reducing bill-of-materials complexity in embedded control designs. The 130nm flash process provides live-at-power-up behavior and non-volatile storage of the design bitstream. Typical applications include industrial power-supply supervision and sequencing, motor control drives, battery-management systems, embedded controllers combining MCU and FPGA roles, and space-constrained systems where a single-chip non-volatile FPGA eliminates external boot devices. A key design consideration is supply-chain lead time: Mouser lists this part as non-stocked with a 16-week lead time, so production planning should secure stock early or evaluate the industrial-temperature M7AFS600-1FG256I variant. Power budgeting should account for the 1.5V core rail plus I/O bank rails. This page synthesizes verified distributor pricing, drop-in alternatives within the same 256-ball footprint, and practical sourcing and design notes not consolidated in the manufacturer datasheet.

見積もりお問い合わせ

M7AFS600-1FG256I

M7AFS600-1FG256I - Fusion Mixed-Signal FPGA 600K Gates | Microchip

The Microchip (formerly Actel/Microsemi) M7AFS600-1FG256I is a Fusion mixed-signal field programmable gate array (FPGA) delivering 600K system gates with an optional ARM CoreMP7 processor, 119 user I/O, and 256-LBGA packaging in an industrial -40C to +85C temperature grade. It is fabricated on an advanced 130-nm, 7-layer metal flash-based CMOS process. A mixed-signal FPGA is a programmable logic device that combines flash-based digital fabric with configurable analog peripherals, large flash memory blocks, and clock generation circuitry on a single monolithic die. Unlike SRAM FPGAs, flash-based FPGAs are nonvolatile, retaining their configuration when powered off, which places them in the power management and single-chip embedded control hierarchy alongside MCUs and SoCs. Key differentiating features include live at power-up (LAPU) operation for instant-on behavior, up to 350 MHz system performance, integrated configurable analog blocks (ADC, voltage/temperature monitors), and secure nonvolatile flash programming that eliminates the external boot configuration device required by SRAM FPGAs. Technically, the device integrates a 7-layer-metal flash fabric, embedded flash memory blocks, comprehensive clock conditioning circuitry (CCCs with PLLs), and analog peripherals such as a progressive-resolution ADC, making it a genuine single-chip solution for mixed-signal board-level integration. The ARM CoreMP7 soft/hard processor option enables embedded control within the programmable fabric. Typical applications include industrial control and automation, power supply and energy monitoring, medical instrumentation, and test equipment, where combining analog measurement with programmable digital logic reduces BOM count and board area. Design consideration: verify power sequencing and analog reference layout early - the mixed-signal nature demands clean analog ground partitioning unlike pure digital FPGAs. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet.

見積もりお問い合わせ

M7AFS600-1FG484

M7AFS600-1FG484 - Fusion FPGA 600K Gates 484-BGA | Microchip

The Microchip Technology (formerly Microsemi) M7AFS600-1FG484 is a Flash-based Fusion Field Programmable Gate Array (FPGA) with 600K system gates, an embedded ARM CoreMP7 processor, and 172 user I/Os, housed in a 484-ball Fine-Pitch Ball Grid Array (FBGA) package with 1.0 mm ball pitch. An FPGA is a programmable logic device that allows designers to configure digital logic circuits after manufacturing. Unlike SRAM-based FPGAs that lose their configuration at power-off, the Fusion family uses a 130-nm, 7-layer metal Flash-based CMOS process, making it a nonvolatile FPGA that retains its program when powered off and is Live at Power-Up (LAPU). This eliminates the external configuration PROM required by SRAM FPGAs and improves system security and boot time. Key features of the M7AFS600-1FG484 include the ARM CoreMP7 soft processor core running up to the 1282.05 MHz listed operating frequency figure for the -1 speed grade, Flash-based nonvolatile configuration, and a rich mixed-signal capability set typical of the Fusion family (configurable analog blocks including ADCs, voltage/temperature monitoring, and clock management resources). The 484-FBGA surface-mount package supports high-I/O-count system-on-chip integration. Architecture-wise, the device combines programmable fabric, embedded Flash memory, and system peripherals on a single die at the 130-nm node with a 1.5V core supply, enabling single-chip embedded control with custom logic acceleration. Typical applications include industrial automation and control, secure embedded systems, aerospace/defense subsystem prototyping, medical instrumentation, and power/sensor management where in-system reprogrammability and instant-on behavior matter. When designing with this device, plan power sequencing and bank I/O standards early, and reserve adequate decoupling for the 1.5V core rail. This page synthesizes distributor pricing data, drop-in alternatives within the same 484-BGA footprint, and practical design guidance not found in the manufacturer datasheet.

見積もりお問い合わせ

M7AFS600-1FG484I

M7AFS600-1FG484I - Fusion FPGA 600K Gates, 484 FBGA | Microchip

The Microchip Technology (formerly Microsemi/Actel) M7AFS600-1FG484I is a Fusion mixed-signal Flash FPGA with 600,000 system gates, 172 user I/Os, and 110,592 tiles of programmable logic, housed in a 484-ball Fine-Pitch Ball Grid Array (484 FBGA, 23 x 23 x 2.44 mm) with industrial-grade -40C to +85C (I) temperature rating and 1 speed grade. A Fusion FPGA is a Flash-based, nonvolatile field programmable gate array that integrates programmable logic, embedded flash configuration memory, and mixed-signal peripherals into a single chip. Within the power management hierarchy, the Fusion family occupies the system-on-chip tier below full ASSPs: FPGA fabric plus optional ARM CoreMP7 soft/hard processor support, making it a complete programmable system-on-chip (SoC) rather than a pure digital FPGA. Key features include a nonvolatile Flash-based 130-nm, 7-layer-metal CMOS process that retains its configuration when powered off, and Live at Power-Up (LAPU) operation so the device is functional within microseconds of power application. Unlike SRAM FPGAs, no external boot flash or bitstream loading delay is required. The integrated analog peripherals (voltage/temperature monitoring ADC, user flash memory blocks) support complete single-chip system monitoring and control designs. Technical depth: the M7AFS600 fabric provides roughly 110,592 logic elements organized into versatile logic blocks, supported by embedded SRAM and flash memory blocks. The ARM CoreMP7 processor option enables embedded control alongside the fabric. Supply is a nominal 1.5V core (CMOS logic family), with industrial (I) qualification covering -40C to +85C operation per distributor listings. Typical applications include industrial automation and control, power supply and backplane monitoring, aerospace and defense control electronics, and single-chip embedded systems that previously required separate FPGA plus supervisor plus ADC components. Design consideration: because this is a Flash-based FPGA with 1.5V core supply, verify power-rail sequencing and mixed-voltage I/O bank constraints early in the design; the 484 FBGA requires a carefully planned via-in-pad escape strategy on at least an 8-layer board. This page synthesizes distributor pricing, drop-in alternatives within the M7 Fusion family, and practical design notes not found in the manufacturer datasheet.

見積もりお問い合わせ

M7AFS600-1FGG256

M7AFS600-1FGG256 - Fusion 600K Gate Mixed-Signal FPGA | Microchip

The Microchip Technology (Actel/Microsemi) M7AFS600-1FGG256 is a Fusion mixed-signal FPGA with 600K system gates, an embedded 32-bit ARM CoreMP7 processor, and 110592 fabric elements, housed in a 256-ball FBGA (FGG256, 17x17 mm) package on a -1 speed grade. A mixed-signal FPGA is a field-programmable gate array that integrates configurable digital logic fabric with analog peripherals on a single die. Within the programmable logic hierarchy (FPGA -> programmable SoC -> programmable logic device -> semiconductor), Fusion devices from Actel, later Microsemi and now Microchip Technology, were pioneering because they combined flash-based fabric with ADC, RTC, and POR analog blocks, removing external analog components from many embedded designs. Key features of the M7AFS600 include the hard-wired ARM CoreMP7 processor running at high frequency from the 130nm flash process, flash-based nonvolatile configuration (no external boot PROM required and instant-on operation), and integration of analog peripherals such as a multi-channel ADC and programmable low-dropout regulators. The -1 speed grade and commercial temperature variant (0C to +70C) make this suffix cost-optimized for standard embedded applications. Architecturally, the Fusion family is built on Actel's proven flash-based ProASIC3 fabric augmented with analog I/O, giving designers single-chip system management, power sequencing supervision, and fan control alongside custom logic. The 256-ball FGG256 footprint with 17x17 mm ball grid array suits two-layer routing of high-logic-density designs in compact form factors. Typical applications include embedded system controllers, power-supply and board-level health monitoring, industrial automation interfaces, and portable instrumentation where one chip must replace an MCU plus supervisor plus analog front end. Design consideration: flash-based Fusion fabric is live-at-power-up; verify power-rail sequencing for the 1.5V core and 3.3V I/O domains, and confirm the ARM CoreMP7 clock plan against the -1 speed grade timing derating. This page synthesizes distributor availability from Mouser, DigiKey, Octopart, and LCSC, drop-in alternatives from the same Microchip Fusion/ProASIC3 families, and practical design guidance not consolidated in the manufacturer datasheet.

見積もりお問い合わせ

M7AFS600-1FGG256I

M7AFS600-1FGG256I - Fusion FPGA 600K Gates ARM CoreMP7 | Microchip

The Microchip Technology M7AFS600-1FGG256I is a Flash-based mixed-signal FPGA from the Actel Fusion family, offering 600K system gates, an embedded ARM Cortex-M7 class CoreMP7 processor, 119 user I/O, and a 1.5V core supply, housed in a 256-ball FineGrid FBGA package with industrial temperature rating (-40C to +85C). A mixed-signal FPGA is a field-programmable gate array that integrates configurable logic fabric with analog peripherals and a hard processor core on a single die. Within the power-management hierarchy, the Fusion family combines FPGA fabric, programmable analog (ADC, voltage monitors, comparators), and the ARM CoreMP7 soft-attached processor, replacing an FPGA-plus-MCU-plus-analog-IC multi-chip solution with one nonvolatile device. Key features include the advanced 130-nm, 7-layer-metal flash-based CMOS process, nonvolatile configuration that retains the program when powered off, and Live at Power-Up (LAPU) operation, meaning the device is functional immediately when power is applied. System performance reaches up to 350 MHz, and the flash cells eliminate the external configuration PROM required by SRAM FPGAs. Technically, the fabric is organized with Versatile Tiles and supports the CoreMP7 ARM processor at up to 100 MHz. The analog subsystem integrates a 12-bit ADC, programmable gain amplifiers, temperature and voltage monitors, and programmable current sources, enabling true single-chip system management. The speed grade -1 and the industrial I suffix make this variant suited to extended-temperature embedded control designs. Typical applications include power-supply and board-level system management, industrial control, portable instrumentation, and embedded motor control, where integration of analog monitoring, sequencing, and processor logic reduces board area and BOM count. Design-wise, confirm that 119 I/O meet your pin budget and plan power rails for the 1.5V core and 3.3V I/O banks before locking the pinout in Libero SoC. This page synthesizes distributor availability data, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet.

見積もりお問い合わせ

M7AFS600-1FGG484

M7AFS600-1FGG484 - Fusion FPGA 600K Gates | Microchip Technology

The Microchip Technology M7AFS600-1FGG484 is a Fusion® Field Programmable Gate Array (FPGA) with 600K system gates, 172 user I/Os, and 110592 bits of RAM, housed in a 484-pin FBGA package. It operates at a maximum frequency of 1282.05 MHz and is fabricated using 130nm technology with a 1.5V core supply. This device integrates an ARM CoreMP7 soft processor, making it a mixed-signal FPGA suitable for system-on-chip applications. A Field Programmable Gate Array (FPGA) is an integrated circuit that can be configured by the customer after manufacturing to implement custom digital logic. FPGAs are part of the programmable logic device family, which also includes CPLDs and SoC FPGAs. They offer flexibility for prototyping, low-volume production, and applications requiring reconfigurable hardware. The Fusion family specifically combines FPGA fabric with analog blocks, including ADC, DAC, and voltage monitors, enabling mixed-signal designs on a single chip. Key features of the M7AFS600-1FGG484 include 600K system gates, 172 user I/Os, and 110592 bits of embedded RAM. The device supports multiple I/O standards and includes programmable phase-locked loops (PLLs) for clock management. Its 130nm process technology balances performance and power, while the 1.5V core voltage reduces dynamic power consumption. The FBGA-484 package provides a compact footprint with excellent thermal and electrical characteristics. Technically, the Fusion FPGA integrates analog peripherals such as a 12-bit ADC, analog comparators, and voltage regulators, which are not commonly found in standard FPGAs. This integration reduces board space and system cost by eliminating external analog components. The ARM CoreMP7 soft processor can be instantiated in the FPGA fabric to run embedded software, enabling true system-on-chip designs. The device also supports secure programming and has an on-chip security feature to prevent unauthorized readback. Typical applications include industrial control, medical devices, automotive electronics, and communication systems. In industrial control, the M7AFS600-1FGG484 can handle motor control, sensor interfacing, and real-time processing. In medical devices, its analog integration is ideal for patient monitoring and diagnostic equipment. The device's low power and small form factor make it suitable for portable and battery-powered applications. When designing with this FPGA, consider the 1.5V core supply and the need for multiple power rails. Proper decoupling and power sequencing are essential for reliable operation. The device requires configuration at power-up, either from an external SPI flash or via JTAG. Ensure adequate thermal management, as the FBGA package can dissipate significant heat under high utilization. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing a comprehensive resource for engineers evaluating the M7AFS600-1FGG484.

見積もりお問い合わせ

M7AFS600-1FGG484I

M7AFS600-1FGG484I - 600K Gate Fusion FPGA, 172 I/O | Microchip

The Microchip Technology M7AFS600-1FGG484I is a Fusion mixed-signal FPGA with 600K system gates, 172 user I/Os, and 110592 bits of total RAM, housed in a 484-ball FBGA package (23x23 mm) rated for -40C to +85C operation from a 1.5V core supply. A field-programmable gate array (FPGA) is a semiconductor device containing a fabric of configurable logic blocks, routing resources, and I/O cells that the designer programs after manufacturing. FPGAs sit within the broader hierarchy of programmable logic devices, above CPLDs in capacity, and the Microchip (formerly Microsemi/Actel) Fusion family is distinctive because it integrates analog peripherals, flash-based configuration, and hard ARM CoreMP7 processing into a single mixed-signal programmable platform. Key features of the M7AFS600-1FGG484I include the embedded ARM CoreMP7 microprocessor hard core running at up to 1.28205 GHz nominal family rating, 600K system gates of flash-based logic, 172 user I/Os, and an industrial temperature range of -40C to +85C. The flash-based Fusion fabric retains configuration in non-volatile memory, eliminating the external boot flash and configuration controller required by SRAM FPGAs and improving system security and time-to-first-bit. Technically, the device is fabricated in a 130nm process with a 1.5V core supply (1.425V to 1.575V operating window). The M7 speed grade in the suffix denotes the fastest commercial timing grade of the Fusion family, supporting maximum operating frequencies around 1.28205 GHz for logic paths per distributor parametric data. The FBGA-484 package offers a dense 1.0 mm ball pitch surface-mount footprint for high-IO industrial designs. Typical applications include industrial automation and motor control, avionics and defense systems requiring single-chip secure programmable logic, and instrumentation where on-chip analog plus ARM processing reduces BOM count. Design consideration: verify 16-week manufacturer lead time in production planning and budget core voltage at 1.5V within the 1.425V to 1.575V tolerance band. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet.

見積もりお問い合わせ

M7AFS600-2FG256

M7AFS600-2FG256 - Fusion FPGA, ARM CoreMP7, 600K Gates | Microchip

The Microchip Technology (formerly Microsemi/Actel) M7AFS600-2FG256 is a Fusion mixed-signal field programmable gate array (FPGA) with an embedded ARM CoreMP7 processor, 600,000 system gates, 119 user I/O, and 110592 bits of on-chip flash RAM, housed in a 256-ball LBGA (FG256) package measuring 17x17x1.7 mm. Fabricated on a 130 nm flash-based process with a 1.5V core supply, speed grade -2. An FPGA (Field Programmable Gate Array) is a semiconductor device containing programmable logic blocks and reconfigurable interconnects that the designer programs to implement custom digital circuits. FPGAs sit within the broader hierarchy of programmable logic devices (PLDs), above CPLDs in density and below ASICs in unit cost efficiency. The Fusion family from Actel (now Microchip) is unique in combining flash-based FPGA fabric, an ARM hard core, and mixed-signal analog peripherals in a single chip, eliminating the need for external configuration devices. Key features of the M7AFS600-2FG256 include the ARM7-class CoreMP7 hard processor running system logic, 600K system gates of flash-based fabric, 119 available user I/O in the 256-ball FG256 footprint, and non-volatile flash configuration that makes the device instantly operational at power-up with no external boot PROM. Flash programming technology also provides inherent resistance to configuration data corruption and single-event effects compared to SRAM FPGAs. Technically, the Fusion fabric is built on Actel's proven flash-switch architecture at the 130 nm node, combining look-up-table logic, embedded flash RAM blocks, and analog conditioning blocks. The -2 speed grade defines the timing bin for worst-case propagation delays, and the 1.5V core keeps dynamic power moderate while supporting 3.3V I/O signaling. Typical applications include industrial automation and motor control, power supply monitoring and management, portable instrumentation, aerospace and defense subsystems, and medical equipment where mixed-signal integration and instant-on behavior are required. A key design consideration: the FG256 (17x17 mm) package offers fewer I/O than the FG484 variant, so verify that 119 I/O satisfies your pin budget before layout freeze. This page synthesizes verified distributor listings, drop-in alternatives from the Microchip Fusion family, pricing tiers, and practical design guidance not found in the manufacturer datasheet.

見積もりお問い合わせ

M7AFS600-2FG256I

M7AFS600-2FG256I - 600K Gate Fusion FPGA | Microchip

The Microchip Technology M7AFS600-2FG256I is a 600K system-gate Fusion mixed-signal field-programmable gate array (FPGA) housed in a 256-ball LBGA package with 119 user I/O and 110,592 logic elements. It operates from a 1.5 V core supply and supports a maximum system performance of 350 MHz. This flash-based, nonvolatile CMOS FPGA is built on an advanced 130-nm, 7-layer-metal process and is capable of live-at-power-up (LAPU) operation. Fusion FPGAs integrate configurable analog front ends, large flash memory blocks, clock generation and management circuits, and high-performance programmable logic on a monolithic device. They form a family within the broader class of field-programmable gate arrays—devices whose logic fabric can be reconfigured in the field to implement custom digital and analog functions. The integrated analog capability is a differentiator when compared with FPGA families that require external analog components and ADC/DAC interfaces. Key features include 600,000 system gates, 119 user I/O pins, 110,592 logic elements, and nonvolatile flash configuration that retains its program when power is off. The -2 speed grade provides a balanced maximum frequency for cost-sensitive designs, while the I suffix denotes the industrial temperature range. The device also supports live at power-up, which eliminates the external boot device and reduces system complexity. Technically, the Fusion architecture combines an FPGA fabric with a 10-bit ADC, analog comparators, and high-voltage I/O support, enabling mixed-signal designs in a single package. The flash-based configuration cells provide instant-on capability and enhanced security over SRAM-based FPGAs. On-chip clock conditioning circuits support PLLs and clock switching for robust timing management. Typical applications include power management and sequencing in server and telecom systems, motor control in industrial drives, smart battery charging, clock generation and management, aerospace/defense signal processing, and medical instrumentation. The integrated analog block and large flash memory make the M7AFS600-2FG256I especially suitable for system management and monitoring. When designing with this device, pay careful attention to supply decoupling on the 1.5 V core and ensure the 1.5 V supply rise time and sequencing meet the requirements for flash programming. Using the on-chip analog blocks for voltage and temperature monitoring can reduce external component count. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing a complete decision-making resource for engineers sourcing the M7AFS600-2FG256I.

見積もりお問い合わせ

M7AFS600-2FG484

M7AFS600-2FG484 - Fusion 600K Gate FPGA, 172 I/O | Microsemi

The Microsemi (now Microchip Technology) M7AFS600-2FG484 is a Fusion mixed-signal FPGA delivering 600K system gates with 172 user I/Os and 110592 bits of core logic resources, housed in a 484-ball Fine-Pitch Ball Grid Array (FBGA) package operating from a 1.5V core supply. A Fusion FPGA is a field-programmable gate array that integrates programmable fabric with mixed-signal peripherals, flash-based configuration, and ARM processor capability in a single device. Within the power management hierarchy of system design, FPGAs occupy the customizable digital logic layer between fixed-function ASSPs and full ASIC implementations, offering hardware-level parallelism with field upgradability. Key features include the embedded ARM CoreMP7 32-bit processor, 130nm flash-based fabric technology that eliminates external configuration PROMs, and speed grade 2 performance. DigiKey lists this part with 172 I/O and 110592 core cells, and the datasheet references 1470.59 MHz system-level timing capability. The flash-based fabric provides instant-on configuration and inherent immunity to configuration data corruption from radiation or power interruptions, a key advantage over SRAM FPGAs. The M7AFS600 architecture combines the ProASIC3-class fabric with analog peripherals including voltage and current monitoring via on-chip analog-to-digital converters, enabling power-supply supervision and thermal management without external circuitry. Security features include flash lock and AES-based bitstream protection for design IP protection. Typical applications include industrial automation controllers, military and aerospace subsystems, medical instrumentation, power-line monitoring, and communications infrastructure requiring configurable logic plus analog system health monitoring. A key design consideration: the FG484 (standard) versus FGG484 (Pb-free) suffix must match your soldering profile, and the -2 speed grade is slower than grade 1 parts but lower power; verify timing closure in Libero IDE for grade 2. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet alone.

見積もりお問い合わせ

M7AFS600-2FG484I

M7AFS600-2FG484I - 600K Gate Flash FPGA, 172 I/O | Microchip

The Microchip Technology M7AFS600-2FG484I is a Fusion family flash-based FPGA delivering 600,000 system gates, 110,592 D-type flip-flop logic elements, and 172 user I/Os in a 484-ball Fine-Pitch BGA (1.0 mm pitch) package. It operates from a 1.5V core supply and carries the industrial-grade temperature designation. A flash-based FPGA is a field-programmable gate array whose configuration data is stored in on-chip nonvolatile flash memory cells rather than an external configuration PROM. Within the programmable logic hierarchy (FPGA -> programmable logic device -> semiconductor), flash FPGAs occupy the same role as SRAM FPGAs but offer instant-on behavior and higher configuration security because no bitstream is loaded externally at power-up. Key features include the nonvolatile flash fabric that retains the program when powered off, Live at Power-Up (LAPU) operation so the design is active within microseconds of power application, and an advanced 130-nm, 7-layer-metal flash-based CMOS process. The device also supports an optional ARM CoreMP7 soft processor, allowing embedded control and user logic to coexist on one chip. Architecturally, the M7AFS600 fabric combines VersaTiles - fine-grained logic tiles usable as look-up tables or D flip-flops - with dedicated block RAM and flash configuration storage. The 130-nm process balances density, static power, and flash-cell endurance, while the 1.5V core supply limits dynamic dissipation. The -2 speed grade supports internal fabric clocking in the hundreds of MHz range; the exact maximum fabric frequency for this speed grade should be confirmed in the manufacturer datasheet. Typical applications include industrial control and automation, embedded system controllers, secure or tamper-resistant designs where configuration data must remain private, aerospace and defense sub-systems benefiting from instant-on behavior, and bridge/interfacing logic between processors and custom peripherals. When designing with this device, plan the power tree around the 1.5V core plus separate I/O bank rails, and use Microchip (Microsemi) Libero SoC tools for synthesis and programming - the toolchain is family-specific and not compatible with other FPGA vendors' software. This page synthesizes distributor pricing, drop-in alternatives, application guidance, and practical design notes not found in a single manufacturer datasheet.

見積もりお問い合わせ

M7AFS600-2FGG256

M7AFS600-2FGG256 - 600K Gate Fusion FPGA with ARM | Microchip

The Microchip Technology (Microsemi) M7AFS600-2FGG256 is a Fusion mixed-signal FPGA with 600K system gates, an embedded ARM CoreMP7 soft/hard processor subsystem, 119 user I/Os, and 110592 bits of dedicated logic resources, housed in a 256-ball FBGA (LBGA, 17x17 mm) package. Fabricated on a 130 nm flash-based process, it operates from a nominal 1.5 V core supply (1.425 V to 1.575 V) across a commercial 0C to +70C temperature range. A Fusion FPGA is a field programmable gate array that integrates programmable logic with configurable analog blocks, flash-based configuration memory, and an ARM processor core in a single device. FPGAs sit within the programmable logic hierarchy (programmable logic device -> CPLD/FPGA -> embedded system IC), enabling designers to implement custom digital logic and soft peripherals without ASIC mask costs. Key features include the ARM CoreMP7 processor running at up to 100 MHz for embedded control, flash-based nonvolatile configuration that eliminates external boot PROMs and simplifies security, 119 user I/Os for board-level connectivity, and support for mixed-signal integration unique to the Fusion family. The -2 speed grade balances performance with cost for mid-range designs. Technically, the device uses a sea-of-modules fabric with VersaTile logic elements, embedded SRAM blocks for FIFO and memory functions, and the Fusion analog subsystem that supports voltage, current, and temperature monitoring from on-chip rack circuits. The flash configuration cell technology provides instant-on operation and high resistance to configuration readback attacks compared with SRAM FPGAs. Typical applications include industrial automation controllers, embedded system-on-chip prototyping, power-supply management and telemetry, and defense or instrumentation systems requiring single-chip mixed-signal integration. The 256-FBGA footprint suits space-constrained boards needing high I/O density. Design consideration: the commercial temperature range (0C to +70C) limits use in harsh environments; select the I-suffix variant for -40C to +100C operation. Verify 1.5V core rail sequencing against the power-up specification. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet.

見積もりお問い合わせ

M7AFS600-2FGG256I

M7AFS600-2FGG256I - 600K Gate Fusion Mixed-Signal FPGA | Microchip

The Microchip Technology M7AFS600-2FGG256I is a Fusion mixed-signal FPGA with 600,000 system gates, 119 user I/O, and an optional ARM CoreMP7 processor support, housed in a 256-ball Fine-Pitch Ball Grid Array (FBGA/LBGA) package with 1.0 mm ball pitch. A field-programmable gate array (FPGA) is a semiconductor device containing a matrix of configurable logic blocks connected by programmable interconnects that designers reconfigure after manufacturing. The Fusion family extends this concept into the mixed-signal domain by integrating programmable analog peripherals and flash-based configuration memory onto one die, positioning it above simple CPLDs and alongside full SoC solutions in the programmable-logic hierarchy. Key features include nonvolatile flash-based configuration that retains the program when powered off and enables Live at Power-Up (LAPU) operation, a 130-nm seven-layer-metal flash-based CMOS process, and single-chip integration that removes external configuration PROMs from the bill of materials. The device supports 350 MHz system performance and can host the ARM CoreMP7 soft processor for embedded control. Architecturally, the Fusion fabric combines flash switch technology with programmable analog blocks such as voltage, temperature, and current monitoring channels, allowing analog supervisory functions and digital logic to reside on one die. This reduces board area and improves system reliability versus discrete MCU-plus-CPLD solutions. Typical applications include industrial automation and motor control, power-supply supervision and telemetry, portable instrumentation, and aerospace/defense systems requiring instant-on, high-reliability programmable logic. A key design consideration is the 1.5 V core supply: sequence the power rails and provide adequate decoupling near the FBGA balls, since flash-programming and core currents concentrate on dedicated power balls. This page synthesizes distributor pricing, same-family drop-in speed-grade and temperature-grade alternatives, and practical design notes not consolidated in the manufacturer datasheet.

見積もりお問い合わせ

M7AFS600-2FGG484

M7AFS600-2FGG484 - Fusion FPGA 600K Gates | Microchip Technology

The Microchip Technology M7AFS600-2FGG484 is a Fusion Field Programmable Gate Array (FPGA) from the Fusion family, offering 600K system gates and 110,592 bits of flash memory. It operates at a core voltage of 1.5V and is housed in a 484-pin FBGA package with a 1mm pitch. This device integrates programmable analog, flash memory, and FPGA fabric, making it a versatile mixed-signal solution. A Field Programmable Gate Array (FPGA) is an integrated circuit that can be configured by the customer after manufacturing. FPGAs consist of configurable logic blocks, programmable interconnects, and I/O blocks, allowing designers to implement custom digital logic. The Fusion family adds flash memory and analog blocks, enabling system-on-chip integration for mixed-signal applications. Key features include 172 user I/Os, a maximum operating frequency of 1470.59 MHz, and 130nm process technology. The device supports 1.5V core voltage and includes embedded flash memory for non-volatile storage. The Fusion architecture provides a unique combination of FPGA flexibility with analog and memory resources, reducing board space and system cost. Technically, the M7AFS600-2FGG484 integrates a 32-bit ARM Cortex-M3 (CoreMP7) soft processor, programmable analog blocks (including ADCs, DACs, and comparators), and flash memory. This allows designers to implement complete mixed-signal systems on a single device. The 484-pin FBGA package provides ample I/O for complex designs. Typical applications include motor control, power management, industrial automation, and medical devices. The integrated analog and flash memory make it ideal for applications requiring precise analog monitoring and non-volatile data storage. The 172 I/Os support a wide range of interfaces. When designing with this device, consider the 1.5V core supply and the need for proper decoupling. The flash memory can be programmed in-system, enabling field updates. The analog blocks require careful layout to minimize noise. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing engineers with a comprehensive resource for evaluating the M7AFS600-2FGG484.

見積もりお問い合わせ

サブカテゴリ

製品 (39,000+)

M4A5-64/32-7JI - ispMACH 4A 64-Macrocell 5V CPLD | Lattice

M4T28-BR12SH1 - 48mAh SNAPHAT Lithium Battery + 32.768 kHz Crystal | STMicroelectronics

M5241L - Dual VCA Electronic Volume Control IC | Mitsubishi

M58BW32FB5T3F - 32Mbit 3.3V NOR Flash, 55ns | Micron

M68LC302CAF20VCT-FR - 20MHz M68000 MPU w/ CPM, 100-LQFP | NXP

M74HC14 - Hex Schmitt Inverter, 6-Channel, CMOS | STMicroelectronics

M74HCT244B1 - Octal 3-State Bus Buffer, HCT, DIP-20 | STMicroelectronics

M74HCT273B1R - 8-Bit D-Type Flip-Flop with Clear, DIP-20 | STMicroelectronics

M74VHC1GT50DFT1G - Single Non-Inverting Buffer/Level Shifter | onsemi

M7AFS600-1FG256 - Fusion FPGA 600K Gates 256-FBGA | Microchip

M7AFS600-1FG256I - Fusion Mixed-Signal FPGA 600K Gates | Microchip

M7AFS600-1FG484 - Fusion FPGA 600K Gates 484-BGA | Microchip

M7AFS600-1FG484I - Fusion FPGA 600K Gates, 484 FBGA | Microchip

M7AFS600-1FGG256 - Fusion 600K Gate Mixed-Signal FPGA | Microchip

M7AFS600-1FGG256I - Fusion FPGA 600K Gates ARM CoreMP7 | Microchip

M7AFS600-1FGG484 - Fusion FPGA 600K Gates | Microchip Technology

M7AFS600-1FGG484I - 600K Gate Fusion FPGA, 172 I/O | Microchip

M7AFS600-2FG256 - Fusion FPGA, ARM CoreMP7, 600K Gates | Microchip

M7AFS600-2FG256I - 600K Gate Fusion FPGA | Microchip

M7AFS600-2FG484 - Fusion 600K Gate FPGA, 172 I/O | Microsemi

M7AFS600-2FG484I - 600K Gate Flash FPGA, 172 I/O | Microchip

M7AFS600-2FGG256 - 600K Gate Fusion FPGA with ARM | Microchip

M7AFS600-2FGG256I - 600K Gate Fusion Mixed-Signal FPGA | Microchip

M7AFS600-2FGG484 - Fusion FPGA 600K Gates | Microchip Technology