集積回路

PIC12F1822T-I/RF

PIC12F1822T-I/RF - 8-Bit MCU, 3.5KB Flash, 32MHz, 8-UDFN | Microchip

The Microchip PIC12F1822T-I/RF is a nanoWatt XLP 8-bit PIC microcontroller based on the Enhanced Mid-Range core, offering 3.5KB Flash program memory (2K x 14), 128 bytes of SRAM, and 256 bytes of Data EEPROM in an 8-pin UDFN (3x3x0.5mm) surface-mount package. It operates across 1.8V to 5.5V with internal 32MHz oscillator support, integrates 6 I/O pins, and targets AEC-Q100 automotive-grade applications with an industrial -40C to +85C temperature range. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), working memory (RAM), non-volatile data storage (EEPROM), and programmable I/O peripherals. PIC microcontrollers from Microchip use a RISC Harvard architecture with separate program and data buses, providing deterministic single-cycle instruction execution. The 8-bit PIC12F family is positioned for cost-sensitive, space-constrained embedded designs that require low power consumption and minimal pin count, and sits within the broader semiconductor hierarchy of microcontrollers, embedded processors, and integrated circuits. Key features include nanoWatt XLP technology for ultra-low-power sleep modes (down to sub-microamp quiescent currents), an internal 32MHz high-speed oscillator selectable via configuration bits, an on-board 10-bit ADC with computation, and multiple communication peripherals including EUSART, MSSP (SPI/I2C), and PWM modules. The device also integrates a configurable logic cell (CLC), Complementary Waveform Generator (CWG), and Numerically Controlled Oscillator (NCO) for flexible signal generation without external components. Typical applications include battery-powered IoT sensor nodes, automotive body and lighting controllers, white-goods user interfaces, low-cost motor control, and consumer remote controls. The 8-UDFN package footprint of 3x3mm is one of the smallest available for PIC MCUs, enabling dense PCB layouts in wearables and space-constrained modules. When designing with the PIC12F1822T-I/RF, prioritize decoupling capacitor placement near the VDD pin and use the MPLAB X IDE with the XC8 compiler for firmware development. The integrated debug logic via ICSP allows in-circuit programming without a debug header, reducing BOM cost for prototype to production transition. Ensure configuration bits are properly set for the desired oscillator source before code deployment.

見積もりお問い合わせ

PIC12F1840-E/MF

PIC12F1840-E/MF - 8-bit 32MHz 7KB Flash MCU 8-DFN | Microchip

The Microchip Technology PIC12F1840-E/MF is an 8-bit PIC® XLP™ flash microcontroller delivering 32 MHz CPU performance with 7 KB (4K x 14) of program Flash and 256 bytes of EEPROM, housed in an 8-pin DFN (3x3 mm) surface-mount package. The part integrates six general-purpose I/O pins, an internal 32 MHz oscillator, multiple serial communication peripherals including I²C, SPI, and EUSART, plus a 10-bit ADC and PWM/timer/capture modules, all on a single CMOS die designed for nanoWatt XLP low-power operation. The operating voltage range spans 1.8 V to 5.5 V with extended (-40 °C to +125 °C) industrial temperature grade, enabling battery-powered and harsh-environment designs. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (Flash/ROM), volatile data memory (RAM), non-volatile data memory (EEPROM), and configurable peripheral blocks such as timers, ADCs, and communication controllers. Within the broader hierarchy of semiconductor devices, an MCU sits under microcontrollers -> microcomputer ICs -> integrated circuits. The PIC12F1840 belongs to Microchip's enhanced mid-range 8-bit PIC12 family, which traces its lineage back to the original Harvard-architecture PIC® RISC cores and is the smallest-footprint 8-bit MCU family Microchip ships in production. Key features include 7 KB self-programmable Flash, 256-byte EEPROM, 256-byte SRAM, six I/O pins, four 10-bit PWM outputs, four 10-bit ADC channels, a comparator module, and nanoWatt XLP sleep currents as low as 20 nA typical, with an active current of approximately 1.8 mA at 4 MHz / 2 V. Core-independent peripherals such as the Configurable Logic Cell (CLC), Numerically Controlled Oscillator (NCO), and Complementary Waveform Generator (CWG) offload timing-critical tasks from the CPU, allowing continued peripheral operation in sleep mode. The integrated 32 MHz internal oscillator eliminates the need for an external resonator in space-constrained designs. Typical applications include battery-powered IoT sensor nodes, portable consumer devices, LED lighting controllers, low-cost motor control, and remote/wireless control transmitters. The wide 1.8 V-5.5 V operating range and nanoWatt XLP sleep performance make it especially suitable for energy-harvesting and coin-cell applications where quiescent current is critical. When designing with this device, allocate the six I/O pins carefully because three are shared with the ICSP programming interface, leaving only three usable for application I/O if ICSP is retained in-circuit. Place a 100 nF decoupling capacitor within 5 mm of the VDD pin and reserve the exposed pad (DFN package) for proper thermal dissipation and ground return. The internal 32 MHz oscillator is factory calibrated to ±2% typical, so designs that need precise UART baud rates over temperature should use the PLL or external crystal options. This page synthesizes distributor stock and pricing, drop-in package-equivalent alternatives, and practical design notes that are not consolidated in the manufacturer datasheet alone, helping procurement and design engineers evaluate the PIC12F1840-E/MF against pin-compatible options in the Microchip PIC10/PIC12/PIC16 families.

見積もりお問い合わせ

PIC12F1840-E/P

PIC12F1840-E/P - 8-bit MCU, 7KB Flash, nanoWatt XLP DIP-8

The Microchip Technology PIC12F1840-E/P is an 8-bit enhanced mid-range flash microcontroller featuring 7KB of Flash program memory, 256 bytes of EEPROM, and 256 bytes of RAM, all integrated into a 300-mil 8-pin PDIP (P) through-hole package. Operating from 1.8V to 5.5V with nanoWatt eXtreme Low Power (XLP) technology, it delivers active current as low as 50 µA/MHz at 3V and sleep currents down to 20 nA, making it ideal for battery-powered edge nodes. The core executes instructions in a single 200 ns cycle across a 49-instruction set with 16 stack levels. A PIC microcontroller is a compact, deterministic CMOS processor built on a Harvard RISC architecture with separate program and data buses, widely used in embedded designs that require low power, low cost, and small footprint. Within the broader taxonomy, the PIC12F1840 sits in the hierarchy: PIC microcontroller -> 8-bit MCU -> enhanced mid-range core -> flash MCU with XLP -> embedded controller. This positioning explains why the part is so common in consumer, IoT, and industrial sensor front-ends where deterministic interrupt latency and ultra-low standby current matter more than raw compute throughput. Key features include six I/O pins with independent weak pull-ups and interrupt-on-change, four 10-bit ADC channels, two 8-bit timers and one 16-bit timer, a Capture/Compare/PWM (CCP) module, an Enhanced Universal Synchronous/Asynchronous Receiver/Transmitter (EUSART), and an integrated configurable reference and temperature indicator. The device supports in-circuit serial programming (ICSP) and in-circuit debugging through PICkit 3, MPLAB ICD 3, or the MPLAB Snap programmer. Architecturally, the PIC12F1840 uses Microchip's enhanced mid-range core with a 14-bit instruction word and an internal 32 MHz oscillator, alongside an 8 MHz calibrated HFINTOSC factory-trimmed to ±1%. The internal oscillator eliminates external crystals in most designs and reduces BOM cost. The XLP family design minimizes dynamic and leakage power, allowing years of operation from a single coin cell. Typical applications include battery-backed sensor nodes, LED lighting controllers, low-power remote controls, simple motor drivers, and home automation peripherals. The combination of nanoWatt sleep modes and fast wake-up from interrupt makes the part well suited to event-driven IoT endpoints. When designing with this device, plan the I/O pinout carefully - only six of the eight pins are general-purpose because VDD, VSS, and ICSPCLK/ICSPDAT also share pins. Use MPLAB X IDE with XC8 compiler and reserve a pull-up on MCLR unless the internal MCLR is enabled. For low-power designs, configure unused peripherals to OFF and use the deep-sleep current of approximately 20 nA.

見積もりお問い合わせ

PIC12F1840-E/SN

PIC12F1840-E/SN - 8-bit 32MHz 7KB Flash MCU | Microchip | SOIC-8

The Microchip Technology PIC12F1840-E/SN is an 8-bit PIC® microcontroller with nanoWatt XLP technology, featuring 7KB (4K x 14) FLASH program memory, 256 bytes RAM, and 256 bytes EEPROM in an 8-pin SOIC package. It operates up to 32MHz internal oscillator speed and runs from 2.5V to 5.5V supply. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and peripherals around an 8-bit data path. The PIC12F1840 belongs to the enhanced mid-range PIC12 family, which sits in the broader hierarchy: PIC12 -> PIC10/12/16/18 family -> 8-bit PIC microcontroller -> microcontroller -> embedded processor -> semiconductor. The 8-bit MCU category is widely used in cost-sensitive, low-power embedded designs where deterministic instruction execution and ultra-low standby current matter more than raw computational throughput. Key features include six I/O pins, an integrated 32MHz internal oscillator, 12-bit ADC with computation, multiple communication peripherals (I²C, SPI, EUSART), and Microchip's nanoWatt XLP energy-saving modes that allow standby current below 100nA typical. The 'E' temperature grade suffix denotes the Extended operating range of -40C to +125C, suitable for industrial and harsh-environment designs. Architecturally, the PIC12F1840 uses a RISC Harvard architecture with 49 instructions, 16-level hardware stack, and 200ns instruction execution at 20MHz. Its peripheral set includes enhanced PWM modules, configurable logic cells (CLC), numerically controlled oscillator (NCO), and complementary waveform generator (CWG), enabling flexible signal generation without external components. Typical applications include IoT sensor nodes, battery-powered remote controls, low-power wireless sensor interfaces, LED lighting controllers, home automation edge nodes, and portable medical accessories where low quiescent current extends battery life. When designing with this part, ensure MPLAB X IDE and XC8 compiler compatibility. Decoupling: place a 100nF ceramic capacitor within 5mm of VDD, with VSS star-grounded. The internal oscillator eliminates external crystals but can be calibrated via OSCTUNE for tight timing applications. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

見積もりお問い合わせ

PIC12F1840-I/P

PIC12F1840-I/P - 8-bit 32MHz XLP MCU 7KB Flash | Microchip

The Microchip Technology PIC12F1840-I/P is an 8-bit PIC microcontroller in the enhanced mid-range core family with 7KB (4K x 14) Flash program memory, 256 bytes of EEPROM, and 256 bytes of RAM, housed in an 8-pin PDIP through-hole package. It operates at up to 32 MHz internal clock speed from a 1.8V to 5.5V supply, delivering 49 instructions with 16-level hardware stack, interrupt context saving, and nanoWatt XLP extreme-low-power technology for battery-sensitive designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory, RAM, and programmable peripherals into one package. The PIC12F1840 belongs to the 8-bit PIC microcontroller family, itself a subfamily of microcontrollers within the broader integrated circuit and embedded systems taxonomy. Its XLP variants extend the family into ultra-low-power domains where quiescent current is measured in nanoamperes, making the PIC12F1840-I/P a hybrid of compact 8-pin form factor and modern low-power performance. Key features include six I/O pins multiplexed with peripherals such as a 10-bit ADC, two 8-bit timers, one 16-bit timer, Enhanced PWM, MSSP for SPI/I2C, EUSART, and configurable logic cells. The device supports internal 32 MHz oscillator, 31 kHz LFINTOSC, and PLL, eliminating external crystals in many designs. Core peripherals include a WWDT windowed watchdog, BOR/POR power management, in-circuit serial programming (ICSP), and code protection via Microchip's low-pin-count IP (US Patent 5,847,450). Architecturally, the PIC12F1840 uses a RISC Harvard CPU with separate program and data buses, single-cycle instruction execution at 32 MHz (125 ns instruction time), and 16-deep hardware stack. The flash memory is self-read/write capable, supporting live firmware updates and data EEPROM emulation. XLP technology provides sleep currents as low as 20 nA typical, with multiple power-managed operating modes (Run, Idle, Sleep) selectable in software. Typical applications include consumer remote controls, sensor node interfaces, battery-powered IoT edge devices, simple motor control loops, LED driving, and low-cost educational platforms. The 8-pin PDIP form factor is also widely used in retrofits for legacy PIC12F675/PIC12F683 designs, since the PIC12F1840 offers a clean migration path with substantially more memory and peripherals. When designing with this device, ensure decoupling caps (100 nF + 10 uF bulk) are placed close to VDD/VDDCORE pins, MCLR is pulled up correctly for ICSP, and unused I/O pins are configured as outputs low to minimize current. For automotive or AEC-Q100 work, the PIC12F1840-I/P industrial grade operates from -40C to +85C, so consult the automotive grade separately if required. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

見積もりお問い合わせ

PIC12F1840-I/SN

PIC12F1840-I/SN - 8-bit XLP MCU 32MHz 7KB Flash SOIC-8 | Microchip

The Microchip Technology PIC12F1840-I/SN is an 8-bit Flash microcontroller from the PIC XLP 12F family, offering a 32 MHz internal oscillator, 7 KB (4K x 14) Flash program memory, 256 bytes of EEPROM, and 256 bytes of SRAM in an 8-pin SOIC package. It runs from 2.5 V to 5.5 V with industry-leading nanoWatt XLP sleep currents below 20 nA in deep sleep. A microcontroller (MCU) is a single-chip computer containing a CPU core, program and data memory, programmable I/O peripherals, and communication interfaces. The PIC12F1840 uses an Enhanced Mid-Range 8-bit core with 49 instructions and a 16-level hardware stack, sitting in the taxonomy chain microcontroller -> embedded controller -> semiconductor IC. It is designed for low-pin-count, battery-powered, and always-on applications. Key features include an internal 32 MHz oscillator, four 10-bit ADC channels, a configurable mTouch capacitive sensing module, a Data Signal Modulator (DSM), an EUSART with auto-baud, an MI2C/SPI interface, a 25 mA source/sink I/O, and a comparator with selectable voltage reference. The integrated ECCP (Enhanced Capture/Compare/PWM) module supports half-bridge, full-bridge, and PWM steering topologies for lighting and motor control. The 8-pin SOIC (SN) package makes the PIC12F1840-I/SN an ideal drop-in upgrade for legacy PIC12F675 designs that need more memory, more peripherals, and lower sleep current. PIC XLP nanoWatt technology combined with active clock tuning and ultra-low-power wake-up sources enables multi-year coin-cell operation in remote sensor nodes. Typical applications include consumer appliances, IoT end nodes, LED lighting controllers, capacitive touch user interfaces, sensor conditioning, and remote controls. The wide operating range (industrial -40 °C to +85 °C) and rich peripheral set make it a strong fit for space-constrained mixed-signal designs. When designing with the PIC12F1840, ensure decoupling capacitors of 0.1 µF are placed within 5 mm of VDD, and that unused I/O are configured as outputs to minimize sleep current. Programming is supported by the free MPLAB X IDE and Xpress, PICkit, or Curiosity programmers - a key advantage over cross-brand 8-bit alternatives that often lack a unified, free toolchain. This page synthesizes drop-in alternatives, package-matched cross-references, and practical design notes that complement, but do not replace, the manufacturer datasheet.

見積もりお問い合わせ

PIC12F1840T-I/RF

PIC12F1840T-I/RF - 8-bit 32MHz XLP MCU 7KB Flash | Microchip

The Microchip PIC12F1840T-I/RF is an 8-bit Flash microcontroller based on the enhanced mid-range PIC® core with XLP (eXtreme Low Power) technology, delivered in an 8-pin UDFN (3x3 mm) package with exposed pad. It integrates 7 KB of Flash program memory, 256 bytes of RAM, and 256 bytes of EEPROM data memory, and runs at up to 32 MHz internal oscillator speed from a 1.8V to 5.5V supply. A microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory, working RAM, and peripheral interfaces such as timers, ADC, communications, and I/O. PIC12-series parts are 8-bit Harvard-architecture devices in the broader microcontroller taxonomy: MCU -> 8-bit MCU -> PIC microcontroller -> PIC12 family -> enhanced mid-range core. Their 49-instruction, 16-level hardware stack RISC engine enables deterministic interrupt response in real-time control loops. Key features include a 4-channel 10-bit ADC with internal voltage reference, one enhanced capture/compare/PWM (ECCP) module, one MI2C/SPI/EUSART with auto-baud peripheral, two comparators with selectable references, an integrated mTouch capacitive sensing module, a data signal modulator (DSM), and 25 mA source/sink I/O for direct LED drive. XLP technology supports nanoWatt sleep currents below 100 nA typical, which is essential for battery-powered sensor nodes. The architecture uses a 14-bit instruction word with an 8-bit data path, a 16-level hardware stack, and self-read/write Flash. The integrated 32 MHz high-precision internal oscillator eliminates the need for an external crystal on cost-sensitive boards and reduces the BOM. The exposed thermal pad on the UDFN package provides a low thermal resistance path for higher-current I/O switching. Typical applications include IoT sensor nodes, wearable health devices, low-power remote controls, LED lighting controllers, capacitive touch user interfaces, and battery-backed security/keypad modules. The combination of a 10-bit ADC, ECCP PWM, and EUSART with auto-baud also suits brushed-DC fan control and simple BLDC commutation logic. When designing with the PIC12F1840, leave the exposed pad (EP) soldered to the ground plane for thermal dissipation and supply decoupling. Always decouple VDD with a 0.1 uF ceramic close to the pin and place the ICSP programming pins (ICSPCLK/ICSPDAT) on dedicated test points or a 6-pin header to enable in-circuit debugging with the MPLAB Snap or PICkit. This page synthesizes distributor pricing from Mouser/DigiKey, drop-in same-package alternatives, and practical design notes that are not found in the standalone manufacturer datasheet. All data is sourced from verified distributor pages and Microchip's official PIC12F1840 datasheet.

見積もりお問い合わせ

PIC12F508-E/MC

PIC12F508-E/MC - 8-bit 4MHz Flash MCU, 768B, 8-DFN | Microchip

The Microchip Technology PIC12F508-E/MC is a low-cost, high-performance, 8-bit, fully-static, Flash-based CMOS microcontroller in an 8-pin DFN (2x3 mm) exposed-pad package. It features 768 bytes (512 x 12 words) of Flash program memory, 25 bytes of RAM, and 5 general-purpose I/O pins, with an internal 4 MHz oscillator. The PIC12F508-E/MC is part of the PIC12F508/509/16F505 family, one of the smallest and lowest-cost 8-bit Flash MCUs in Microchip's midrange portfolio. An 8-bit microcontroller (MCU) is a self-contained computer-on-a-chip integrating an 8-bit CPU, program memory, RAM, and peripherals. It belongs to the microcontroller family, which itself sits within embedded processors, embedded computing, and finally the broader category of integrated circuits. The PIC12F508-E/MC uses a RISC-like Harvard architecture with only 33 single-word/12-bit instructions, achieving typical 2:1 code compression over competitive 8-bit MCUs and enabling dense firmware in tiny program-memory footprints. Key features include 4 MHz internal oscillator accuracy, 2.0V to 5.5V wide operating voltage, in-circuit serial programming (ICSP), a watchdog timer with on-chip RC oscillator, power-on reset, power-saving Sleep mode, and an 8-bit real-time timer/counter (TMR0). The 8-DFN exposed-pad package provides a low thermal-resistance path, suitable for compact, thermally-constrained consumer and industrial designs. The -E suffix designates the Extended (industrial) temperature range of -40C to +125C. Architecturally, the PIC12F508-E/MC uses a two-stage pipeline with single-cycle instruction execution except for program branches, and a 12-bit-wide instruction word that delivers compact code density. The internal 4 MHz RC oscillator eliminates the need for an external crystal, reducing BOM cost and PCB area. Compared to PIC10F-series 6-pin MCUs, the PIC12F508 adds 2 extra I/O lines, more program memory, and the timer/counter peripheral, while remaining in a similar price bracket. Typical applications include low-cost consumer appliances, LED lighting controllers, battery chargers, simple sensor interfaces, toys, and remote-control transmitters. Designers also use the PIC12F508-E/MC as a "smart" replacement for discrete logic or analog timer circuits, consolidating glue logic and timing functions into a single reprogrammable device. The 8-pin DFN footprint is ideal where board space is at a premium. When designing with this device, note the lack of an analog-to-digital converter (ADC) and on-chip debug interface - engineers requiring these features should consider the PIC12F1572 or PIC12F1822 family. For new designs, Microchip recommends the PIC16F15313 as a newer pin-compatible successor with enhanced peripherals.

見積もりお問い合わせ

PIC12F508-E/MS

PIC12F508-E/MS - 8-Bit 4MHz MCU 768B Flash MSOP | Microchip

The Microchip Technology PIC12F508-E/MS is an 8-bit Flash microcontroller built on a RISC architecture, delivering 4 MIPS of performance at 4 MHz from 768 bytes of program memory, housed in an 8-pin MSOP package. According to the Microchip PIC12F508/509/16F505 datasheet, the device integrates 25 bytes of RAM, 6 I/O pins, and a precision 4 MHz internal oscillator, all in a compact 3.00 mm MSOP outline. What is a PIC12-series 8-bit microcontroller? The PIC12F family sits at the entry level of Microchip's PIC microcontroller hierarchy, positioned below PIC16 and PIC18 in code complexity but offering exceptional cost-effectiveness for simple control tasks. As a Flash-based, fully static CMOS MCU, the PIC12F508 belongs to the broader category of embedded microcontrollers -> microcontrollers -> embedded processors -> semiconductors, and is widely used where deterministic, low-power control replaces discrete logic or analog circuitry. Key features include a 33-instruction set with 12-bit-wide opcodes that achieve typical 2:1 code compression versus competing 8-bit MCUs in its class, an extended operating temperature range of -40C to +125C (E suffix), and a wide 2.0 V to 5.5 V supply range. The device supports in-circuit serial programming (ICSP), enabling firmware updates after PCB assembly without requiring a pre-programmed part. Six general-purpose I/O pins can be configured for digital I/O, weak pull-ups, or analog comparator inputs, providing flexibility for mixed-signal designs. At the architectural level, the PIC12F508 uses a Harvard architecture with separate program and data buses, eliminating the bottleneck of unified memory access. Its single-cycle instruction execution allows deterministic timing for real-time control loops, and the 4 MHz internal oscillator eliminates external crystal components, reducing both BOM cost and PCB footprint. Typical applications include consumer appliance control, battery-powered sensor interfaces, LED lighting controllers, simple fan or motor drivers, and low-cost replacement of discrete logic. The wide temperature range and small MSOP-8 package suit it especially for space-constrained industrial or automotive subsystem nodes. When designing with this device, note that the 768-byte program memory limits firmware to roughly 500-600 instructions; designers targeting complex protocols should evaluate PIC12F1822 or PIC12F1840. The ICSP pins (GP0/GP1) must be accessible in the final PCB layout for in-field firmware updates. This page synthesizes distributor pricing, drop-in alternatives within the PIC12 family, and practical design notes that complement, but do not replace, the official Microchip datasheet (DS41236E).

見積もりお問い合わせ

PIC12F508-E/P

PIC12F508-E/P - 4MHz 8-Bit Flash MCU | Microchip

The Microchip Technology PIC12F508-E/P is a low-cost 8-bit, fully static, Flash-based CMOS microcontroller with a 4 MHz maximum clock, 768 bytes of program memory, 25 bytes of RAM, and five I/O pins in an 8-pin PDIP package. It combines a compact RISC-style architecture with 12-bit-wide instructions and internal oscillator support for cost-sensitive embedded control. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, I/O, timers, and reset functions on one device. The PIC12F508 belongs to the 8-bit PIC microcontroller family and provides a direct path from firmware to embedded logic, allowing designers to replace several discrete components with a small, deterministic control system. Its 12-bit instruction word is highly symmetrical and typically provides approximately 2:1 code compression compared with other 8-bit microcontrollers in its class. The verified product data identifies 768 bytes of program memory organized as 512 by 12 bits, 25 bytes of eight-bit RAM, five I/O pins, and a 4 MHz operating speed. The device is supplied in an 8-pin PDIP package with a 0.300-inch, 7.62 mm body format. The -E designation identifies the specified extended-temperature grade, while /P identifies the PDIP package variant. PIC12F508-E/P is suitable for compact control products, simple timers, digital logic controllers, sensor interfaces, LED sequencing, and low-power embedded systems. Its small package and limited memory footprint suit applications where board area and simplicity matter more than high peripheral integration. Firmware should account for the small program-memory capacity and use the device’s GPIO and timing resources efficiently. The internal oscillator and Flash programmability support compact, repeatable designs. Designers should verify configuration settings, oscillator behavior, I/O direction, reset assumptions, and timing requirements against the Microchip manufacturer datasheet before production release. The supplied verified sources identify the device as an 8-bit, 4 MHz, 768-byte Flash MCU with 25 bytes of RAM and five I/O pins. This page combines the verified Microchip and distributor specifications with design guidance, application context, comparison fields, sourcing information, and explicit data gaps. It is intended to help engineers evaluate PIC12F508-E/P for small embedded-control designs while avoiding unsupported assumptions about parameters not present in the retrieved source data.

見積もりお問い合わせ

PIC12F508-E/SN

PIC12F508-E/SN - 8-Bit 4MHz Flash MCU, 768B, 6 I/O | Microchip

The Microchip Technology PIC12F508-E/SN is an 8-bit, 4MHz, Flash-based CMOS microcontroller in the PIC12F family, housed in an 8-pin SOIC (SN) package. It integrates 768 bytes (512 x 12) of program Flash memory, 25 bytes of RAM, and 6 configurable I/O pins, providing a compact low-cost compute platform for simple embedded applications. The device operates from 2.0V to 5.5V across the extended industrial temperature range (-40C to +125C) and is specified for automotive-grade process capability. What is an 8-bit Flash microcontroller? An 8-bit Flash microcontroller is a single-chip computer built around an 8-bit data path, with program memory implemented in non-volatile Flash (rather than ROM, EPROM, or one-time programmable memory). This category sits inside the broader microcontroller hierarchy (microcontroller -> embedded processor -> semiconductor) and is widely used in cost- and pin-sensitive designs where 32-bit performance is not required. Key features of the PIC12F508-E/SN include a RISC instruction set with only 33 single-word instructions, an internal 4MHz RC oscillator (no external crystal needed), an 8-bit timer with prescaler, a watchdog timer, and in-circuit serial programming (ICSP) via two pins. With only 8 pins total, 6 of which are available as I/O, the part is designed for ultra-compact PCB designs such as single-chip sensor interfaces, small appliances, and simple logic-replacement modules. The PIC12F508-E/SN uses a Harvard-architecture core with separate program and data buses, a 2-stage pipeline, and 12-bit-wide instructions. According to the manufacturer datasheet, this delivers typical 2:1 code compression over competing 8-bit MCUs in the same price class. The device consumes very low operating current and supports power-saving modes, making it suitable for battery-powered applications. Typical applications include LED blinkers and lighting controllers, battery chargers, sensor signal conditioning, simple motor control (small fans, solenoids), remote-control transmitter logic replacement, and automotive courtesy / interior lamps. The wide 2.0V-5.5V supply range supports both 3.3V and 5V rails commonly found in legacy industrial systems. When designing with this part, allocate two pins to ICSP (VDD/GND-style dual-purpose programming pins) to preserve in-circuit debug capability. Choose an external reset strategy carefully - the device offers optional internal weak pull-ups but no full brown-out reset on all variants. This page synthesizes distributor pricing, drop-in alternatives from Microchip's PIC12F family, and practical design notes not found in the manufacturer datasheet.

見積もりお問い合わせ

PIC12F508-I/MC

PIC12F508-I/MC - 8-bit Flash MCU, 4MHz, 768B Flash | Microchip

The Microchip Technology PIC12F508-I/MC is an 8-bit Flash-based CMOS microcontroller delivering 4 MIPS performance at 4 MHz, packaged in an 8-pin DFN (2x3 mm) form factor. It integrates 768 bytes of Flash program memory (512 x 12 words), 25 bytes of RAM, and 6 general-purpose digital I/O pins, making it one of the smallest and lowest-cost members of the Microchip PIC12F family. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory, working RAM, and programmable I/O peripherals on a single die, executing instructions fetched from on-chip Flash. The PIC12F508 belongs to the baseline PIC12 architecture, which uses 12-bit-wide instructions and offers typical 2:1 code compression over competing 8-bit MCUs in its class. In the broader taxonomy, this device sits at: microcontroller -> embedded microcontroller -> 8-bit MCU -> baseline PIC -> PIC12F family. It targets cost-sensitive applications where deterministic timing, low pin count, and minimal PCB footprint outweigh the need for large memory or analog peripherals. Key features include 4 MHz maximum oscillator frequency, 2.0V to 5.5V operating voltage range, 8-bit timer (TMR0) with 8-bit prescaler, watchdog timer with on-chip RC oscillator for reliable operation, in-circuit serial programming (ICSP) capability, and 6 bidirectional I/O pins with individual direction control. The device consumes only a few milliamps in active mode and drops to microamp-level currents in sleep, enabling battery-friendly designs. The DFN-8 (2x3 mm) package gives a thermal resistance of approximately 70 C/W and exposes a small thermal pad for board-level heat dissipation. Technically, the PIC12F508 uses a RISC Harvard-architecture CPU with 33 single-word instructions, allowing most instructions to execute in a single instruction cycle (1 us at 4 MHz). It supports internal 4 MHz RC oscillator calibration, an external clock input, or low-cost external RC timing. Reset sources include power-on reset (POR), brown-out detect, and watchdog wakeup from sleep. Code protection and ID locations support basic firmware IP security. Typical applications include LED blinkers and decorative lighting controllers, simple sensor interfaces, battery-powered remote controls, consumer appliance sub-controllers, smoke-detector front-ends, and general-purpose glue logic replacement. The wide 2.0V-5.5V supply range simplifies single-cell Li-ion or 3.3V system designs. When designing with this device, ensure ICSP connections (GP1/GP0) are accessible for field firmware updates and that decoupling capacitors are placed as close as possible to VDD. The PIC12F508 is widely supported by MPLAB X IDE, XC8 compiler, and the free MPLAB Xpress cloud toolchain, so engineers can prototype without hardware tool purchases. Note that Microchip recommends the newer PIC16F15313 as the migration path for new designs. This page synthesizes distributor pricing, same-package drop-in alternatives, application notes, and design notes not found in the manufacturer datasheet alone.

見積もりお問い合わせ

PIC12F508-I/MS

PIC12F508-I/MS - 8-bit 4MHz Flash MCU 768B | Microchip

The Microchip PIC12F508-I/MS is an 8-bit flash microcontroller from the PIC12 family, delivering 4 MIPS performance at 4 MHz from a 768-byte program memory (512 x 12 words) in an 8-pin MSOP package. The device operates from a wide 2.0V to 5.5V supply range and integrates 25 bytes of RAM with 6 general-purpose digital I/O pins in a compact DFN/MSOP footprint. An 8-bit microcontroller (MCU) is a single-chip computer that integrates an 8-bit data-path CPU, program memory, working RAM, and peripherals on one die. The PIC12F508 belongs to Microchip's baseline PIC10/12 architecture family, sitting within the broader hierarchy of microcontrollers -> embedded processors -> semiconductors -> integrated circuits. Baseline PIC devices use a 12-bit wide instruction set that yields roughly 2:1 code compression versus competing 8-bit cores, enabling more application logic in fewer bytes of flash. Key features include a hardware single-cycle multiplier-free ALU, internal 4 MHz RC oscillator calibrated to +/- 1 percent typical accuracy, watchdog timer with on-chip low-power RC oscillator, power-on reset, brown-out reset, and an in-circuit serial programming (ICSP) interface. The device sources/sinks up to 25 mA per I/O pin and supports industrial -40C to +85C operating temperatures. Architecturally the PIC12F508 uses a RISC-style Harvard design with separate program and data buses, a single accumulator (W register) plus a 32-byte register file, and a 2-stage pipeline. The flash memory supports in-circuit serial programming, allowing firmware to be updated on assembled boards without removing the device. A 4 MHz internal oscillator eliminates the external crystal typically required, reducing BOM cost and PCB area. Typical applications include LED lighting controllers, battery chargers, simple sensor signal conditioning, low-cost consumer appliances, and pin-compatible upgrades to legacy PIC12C508A designs. The compact MSOP-8 footprint makes it ideal for space-constrained designs. When designing with this MCU, allocate adequate decoupling (100 nF + 10 uF bulk) near the VDD pin. The ICSP pins (GP1/GP0) must be accessible for in-circuit programming; consider adding test points or a 2x3 header to the PCB. This page synthesizes verified distributor pricing, pin-compatible drop-in alternatives from Microchip and competitor equivalents, and practical design notes not found in a single source.

見積もりお問い合わせ

PIC12F508-I/P

PIC12F508-I/P - 8-bit Flash MCU, 4MHz, 768B Flash, 6 I/O | Microchip

The Microchip Technology PIC12F508-I/P is an 8-bit flash microcontroller in the PIC12 family, delivering 4 MIPS performance at 4 MHz from a 768-byte flash program memory in an 8-pin PDIP through-hole package. The -I suffix denotes the industrial temperature grade (-40C to +85C), and the /P suffix denotes the PDIP-8 package. The PIC12F508 is part of Microchip's baseline PIC12F5xx series, designed for cost-sensitive applications requiring minimal pin count and low power consumption. An 8-bit microcontroller is a microprocessor core that processes data in 8-bit wide chunks, typically integrating CPU, RAM, program memory, and peripherals on a single die. Within the broader taxonomy, the PIC12F508 sits at: microcontroller -> 8-bit MCU -> baseline PIC12 family -> flash-programmed PIC12F5xx series -> semiconductor. Its 12-bit instruction word is one of Microchip's defining architectural choices, allowing 2:1 code compression versus typical 8-bit CISC competitors and enabling most instructions to execute in a single instruction cycle. Key features include 25 bytes of RAM, 6 bidirectional I/O pins with individually programmable weak pull-ups, an 8-bit timer (TMR0) with 8-bit programmable prescaler, a watchdog timer with on-chip RC oscillator, power-on reset, power-saving sleep mode, and an internal 4 MHz RC oscillator. The wide operating voltage range (2.0V to 5.5V) supports battery-powered and 5V regulated designs alike. In-circuit serial programming (ICSP) allows firmware updates without removing the device from the board. The PIC12F508 employs a RISC Harvard architecture with a 33-instruction set, only two of which are multi-cycle, and a 2-stage pipeline. The 12-bit instruction width enables efficient code density. An internal 4 MHz precision oscillator eliminates the need for an external crystal in cost-sensitive applications, while an external oscillator option remains for timing-critical uses. The CMOS process ensures low quiescent current in sleep mode, making the device suitable for battery-powered and energy-harvesting designs. Typical applications include low-cost consumer appliances, simple LED controllers, battery chargers, toys, remote controls, sensor signal conditioning, and replacement of discrete logic in glue applications. The 6 I/O pins support peripheral functions including one analog comparator, one 8-bit timer, and ICSP programming. When designing with this part, note that the /P package is through-hole PDIP-8 with 2.54 mm pitch, suited for prototyping and hobby projects. For surface-mount designs, the same silicon die is offered in SOIC-8 (PIC12F508-I/SN) and MSOP-8 (PIC12F508-I/MS) packages. Code-compatible siblings (PIC12F509 with 1.5 KB flash; PIC16F505 with 14 pins and 1.5 KB flash) extend the family for memory expansion. This page synthesizes real-time distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet alone.

見積もりお問い合わせ

PIC12F508-I/SN

PIC12F508-I/SN - 8-bit 4MHz MCU 768B Flash 8-SOIC | Microchip

The Microchip Technology PIC12F508-I/SN is an 8-bit RISC Flash microcontroller from the PIC12 family running at up to 4MHz instruction rate, with 768 bytes (512 x 12 words) of Flash program memory, 25 bytes of RAM, and 6 general-purpose I/O pins, packaged in an 8-pin SOIC (SN) with industrial -40C to +85C operating range. It features a 12-bit-wide instruction set that yields typical 2:1 code compression over comparable 8-bit microcontrollers, reducing Flash footprint and lowering per-unit BOM cost in high-volume designs. A microcontroller (MCU) is a single-chip computer integrating a CPU core, program memory (Flash/ROM), data memory (RAM), peripherals, and I/O on one die. The PIC12F508 belongs to the baseline PIC10/12/16 family - a subcategory of 8-bit microcontrollers optimized for low pin-count, low-cost, deterministic control tasks where an M-class ARM Cortex-M0 part would be overkill. Within the embedded hierarchy it sits between simple logic ICs (timers, gate drivers) and higher-end 32-bit MCUs, often replacing discrete logic plus a small EEPROM in space-constrained assemblies. Key features of this part include an internal 4MHz RC oscillator (no external crystal required), one 8-bit Timer0 with programmable prescaler, a watchdog timer with on-chip RC oscillator for reliable reset, in-circuit serial programming (ICSP) via GP0/GP1, and on-chip in-circuit emulation support. The wide VDD range of 2.0V to 5.5V allows direct operation from 2xAA cells, single-cell Li-ion, or 3.3V/5V regulated rails. Six I/O pins each source/sink up to 25 mA, sufficient to drive LEDs, small relays, and logic buffers directly without external transistors. The PIC12F508 architecture uses a Harvard RISC core with a single accumulator (W register) and 32-byte file-register SRAM, executing most instructions in a single 1us instruction cycle at 4MHz. The 12-bit instruction word eliminates unused upper bits, simplifying decoder logic and keeping silicon area minimal, which is why baseline PICs are consistently priced below 8-bit competitors. Brown-out detect and power-on reset are integrated. Typical applications include low-cost consumer appliance controls, LED blinkers and decorative lighting drivers, PIR motion-sensor trigger boards, simple PWM fan or buzzer controllers, replacement of 555-timer + logic-gate circuits, and battery-powered remote keyfob transmitters. Its tiny 8-SOIC footprint and sub-$0.50 price point make it a go-to MCU for sub-100-node production runs. Design tip: use GP0/GP1 for ICSP - reserve these two pins even in production PCB layouts so the firmware can be re-flashed without rework. Add a 100nF decoupling cap directly across VDD/VSS (pin 1 and pin 8), keep traces short, and route MCLR with its pull-up within 25 mm of pin 4 to avoid spurious resets in noisy environments. This page synthesizes distributor pricing snapshots, verified drop-in alternatives in the same 8-SOIC package, and engineering design notes not found in the standalone datasheet - giving procurement and design engineers an at-a-glance view of supply, fit, and form.

見積もりお問い合わせ

PIC12F508T-E/SN

PIC12F508T-E/SN - 8-bit Flash MCU, 4MHz, 768B Flash, 8-SOIC | Microchip

The Microchip Technology PIC12F508T-E/SN is an 8-bit, fully-static, Flash-based CMOS microcontroller in an 8-pin SOIC package with 4 MHz internal oscillator, 768 bytes of Flash program memory (512 x 12 words), 25 bytes of RAM, and 6 general-purpose I/O pins. It belongs to Microchip's PIC12 baseline core family with 33 single-word/single-cycle instructions and a 12-bit wide instruction word, achieving typical 2:1 code compression versus competing 8-bit MCUs in the same price tier. What is a baseline PIC microcontroller? A baseline PIC microcontroller (PIC10/12 family) is an 8-bit RISC MCU using a Harvard architecture with separate program and data buses and a 2-level deep hardware stack. It executes one instruction per oscillator cycle (200 ns at 20 MHz, 1 µs at 4 MHz internal oscillator) and is positioned at the entry-level of Microchip's 8-bit portfolio, optimized for cost-sensitive and pin-constrained applications such as consumer appliances, toys, sensor signal conditioning, and simple logic replacement. Key features include one 8-bit timer (TMR0), a Watchdog Timer (WDT) with on-chip RC oscillator, In-Circuit Serial Programming (ICSP), In-Circuit Debugging, 25 mA source/sink per I/O pin, ultra-low 100 nA sleep current, and an extended operating temperature range of -40 °C to +125 °C. The internal 4 MHz precision oscillator eliminates the need for an external crystal, reducing BOM cost and PCB area. Architecturally, the PIC12F508 uses a 14-bit instruction word (12 bits used for opcode plus data), 8-bit data path, and 2-level stack. The Harvard architecture allows instruction fetch and data access to occur in the same cycle, giving deterministic 1 MIPS performance at 4 MHz. The Flash memory supports in-system programming via ICSP, enabling firmware updates in the field without removing the device. Typical applications include consumer electronics (remote controls, toys, small appliances), automotive body electronics (interior lighting, simple sensor interfaces), industrial control (timers, sequencers, logic replacement), IoT edge nodes (battery-powered sensor readouts), and home appliances (white goods user interfaces). The 100 nA sleep current makes it well-suited to battery-backed or energy-harvesting designs. When designing with the PIC12F508, note that the device operates from 2.0 V to 5.5 V and is qualified to the -E (Extended) temperature grade. The T-suffix indicates Tape-and-Reel packaging for high-volume assembly. For new designs, Microchip recommends the PIC16F15313 as the modern migration path with enhanced peripherals and lower power. This page synthesizes distributor stock and pricing, drop-in same-package alternatives, application notes, and design considerations not consolidated in a single location in the manufacturer datasheet.

見積もりお問い合わせ

PIC12F509-E/MC

PIC12F509-E/MC - 8-bit Flash MCU, 4MHz, 1.5KB | Microchip

The Microchip Technology PIC12F509-E/MC is an 8-bit Flash-based CMOS microcontroller from the PIC12 family, featuring a 4 MHz internal oscillator, 1.5 KB (1K x 12) of Flash program memory, and 41 bytes of RAM, housed in an 8-pin DFN (2x3 mm) exposed-pad package. The -E suffix denotes the Extended operating temperature range of -40C to +125C, suitable for industrial and automotive under-hood environments. What is an 8-bit Flash Microcontroller (MCU)? An 8-bit Flash MCU is a single-chip computer built around an 8-bit data path with non-volatile Flash program memory. The PIC12F509 family uses Microchip's RISC architecture with 33 single-word single-cycle instructions, providing typically 2:1 code compression over competitive 8-bit MCUs and execution times that are 4x faster per instruction than legacy CISC designs. Key features include six general-purpose I/O pins, an internal 4 MHz RC oscillator, 12-bit-wide instruction words, a wide operating voltage range of 2.0V to 5.5V, and on-chip in-circuit serial programming (ICSP) that allows the device to be programmed after PCB assembly. The PIC12F509 also includes a hardware 8-bit timer with watchdog, power-on reset, brown-out detect, and code protection. With only 8 pins total, it is among the smallest packaged PIC microcontrollers available and is a strong fit for cost- and space-constrained applications. Architecture depth: the PIC12F509 uses a Harvard bus architecture with separate program and data paths, plus a 2-stage pipeline that overlaps fetch and execute to deliver 1 MIPS performance at 4 MHz. The 12-bit instruction word delivers richer opcode space than 8-bit CISC alternatives and produces more compact code, allowing 1.5 KB of Flash to deliver functionality that often requires 2-3 KB on competing cores. Brown-out detect and a configurable watchdog timer enable robust unattended operation. Typical applications include low-cost consumer appliances, battery-powered remote sensors, LED lighting controllers, simple fan/thermostat controls, and automotive body electronics (e.g., seat heater controllers, lighting blinkers). The wide 2-5.5V supply range also makes it well suited to single-cell lithium or 2xAA battery products. When designing with this device, remember that the DFN exposed pad MUST be soldered to the PCB ground plane for thermal and electrical performance. For prototyping, the same silicon is also offered in 8-pin PDIP and 8-pin SOIC packages, which are easier to breadboard.

見積もりお問い合わせ

PIC12F509-E/MS

PIC12F509-E/MS - 8-Bit 4MHz MCU 1.5KB Flash MSOP-8 | Microchip

The Microchip Technology PIC12F509-E/MS is an 8-bit RISC Flash microcontroller featuring a 4 MHz internal oscillator, 1.5 KB (1K x 12 words) of program Flash memory and 41 bytes of data RAM, housed in an 8-pin MSOP package. The device operates from 2.0 V to 5.5 V and is rated for the extended industrial temperature range of -40 °C to +125 °C. An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data path, integrating a CPU, program memory, data RAM, and configurable I/O peripherals on one die. Within the broader taxonomy, the PIC12F509 belongs to the Microchip PIC12 baseline family -> PIC microcontroller -> 8-bit MCU -> microcontroller -> embedded processor -> semiconductor. Baseline PIC12 devices use a RISC architecture with 33 single-word single-cycle instructions, delivering predictable 200 ns instruction execution at 20 MHz (or 1 µs at 4 MHz internal oscillator) and ~2:1 code density over competitive 8-bit MCUs. Microchip recommends the PIC16F15313 as a newer migration device. Key features include 6 general-purpose digital I/O pins, four oscillator selections (EXTRC, INTRC, XT, LP), a watchdog timer with on-chip RC oscillator, in-circuit serial programming (ICSP), and code protection. The device has 1024 words (1.5 KB) of self-programmable Flash, 41 bytes of SRAM, and an 8-bit timer/counter (TMR0) with 8-bit prescaler. Power-on reset (POR) and device reset timer (DRT) eliminate the need for external reset circuitry. Typical applications include low-cost consumer appliances, automotive subsystems (sensor interfaces, LED drivers, fans), industrial control logic, battery-powered devices, and remote controls. The 6 I/O pins drive LEDs, read switches, and interface to peripherals such as comparators or external EEPROMs. When designing with this part, place a 0.1 µF decoupling capacitor adjacent to VDD, observe the in-circuit serial programming (ICSP) pinout (GP1/ICSPCLK, GP0/ICSPDAT, GP3/MCLR̄/VPP), and verify that the chosen oscillator configuration matches the application's timing tolerance. The -E suffix denotes the extended -40 °C to +125 °C operating range. This page consolidates distributor pricing, drop-in same-package alternatives, and practical design notes not aggregated on the manufacturer datasheet alone.

見積もりお問い合わせ

PIC12F509-E/P

PIC12F509-E/P - 4MHz 8-Bit Flash MCU | Microchip

The Microchip Technology PIC12F509-E/P is an 8-bit flash-programmable microcontroller with a 4 MHz internal oscillator, 2 KB of program memory, 41 bytes of RAM, and 6 general-purpose I/O pins, housed in an 8-pin through-hole package. It combines a baseline PIC core using 12-bit-wide instructions with 33 instructions and a two-level hardware stack. The MCU operates from 2 V to 3 V and is identified by Microchip as an in-production family, although the manufacturer recommends PIC16F15313 as a newer device for new designs. An 8-bit microcontroller is a compact embedded-control semiconductor that executes firmware from embedded program memory and reads inputs from sensors, switches, and communication peripherals. The PIC12F509 belongs to the PIC12 family of baseline 8-bit devices, a subcategory of microcontrollers within the broader integrated-circuit and embedded-processing hierarchy. Its small program memory, limited RAM, and compact pin count suit simple control tasks rather than demanding networking, graphics, or high-speed signal processing. The PIC12F509-E/P provides 2 KB of flash memory, 41 bytes of RAM, 6 I/O pins, and a maximum clock speed of 4 MHz. Its 12-bit instruction word permits efficient encoding of common operations, while most instructions complete in a single cycle and program branches require two cycles. The baseline core includes 33 instructions and a two-level stack, making software structure and interrupt depth important considerations in compact control firmware. The extended-temperature ordering code identifies the E grade, which is intended for operation across a wider temperature range than the industrial I grade. The P package suffix denotes the lead-free plastic through-hole format associated with this ordering code. Exact operating-temperature limits, electrical maximums, configuration-bit details, and package dimensions were not included in the verified search data and must therefore be confirmed in the manufacturer datasheet before release to production. Typical uses include small standalone controllers, relay and output logic, sensor-conditioned switching, lamp or indicator control, and low-speed embedded automation modules. The six I/O pins support a compact peripheral arrangement, while 2 KB of flash can hold a focused control routine rather than a large application framework. For designs requiring more memory, more I/O, or modern peripheral options, engineers should evaluate the manufacturer-recommended PIC16F15313 instead. The principal design consideration is to confirm the complete pinout, programming configuration, electrical limits, and decoupling requirements against the official PIC12F509 datasheet. The 2 V to 3 V supply range also requires attention to regulator tolerance, startup behavior, and the voltage levels of attached peripherals. Because no verified distributor price or exact stock quantity was supplied, purchasing should be based on a current quote rather than an assumed unit price. This product page consolidates the verified Microchip product status, distributor specifications, packaging indication, architecture details, and available replacement information. It also distinguishes genuine package-compatible options from related devices that require different footprints, firmware, or design verification, adding procurement and engineering context beyond a basic manufacturer specification listing.

見積もりお問い合わせ

PIC12F509-E/SN

PIC12F509-E/SN - 8-bit MCU, 1.5KB Flash, 4MHz, 8-SOIC | Microchip

The Microchip Technology PIC12F509-E/SN is an 8-bit PIC microcontroller based on a 12-bit instruction word architecture, featuring 1.5KB (1K x 12) of Flash program memory, 41 bytes of RAM, and 6 I/O pins in an 8-pin SOIC package. It executes instructions at up to 4 MHz from an internal 4 MHz RC oscillator, providing an economical solution for simple control tasks. The integrated Flash memory supports in-circuit serial programming (ICSP) for field updates, and the wide 2.0V to 5.5V operating range lets the same part run from two AA cells, a 3.3V regulated rail, or a 5V logic supply. What is an 8-bit microcontroller? An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory (ROM/Flash), volatile data memory (RAM), and peripherals (I/O, timers, ADC, communications) on one die. Within the broader taxonomy, the PIC12F509 belongs to the PIC10/12 baseline family of microcontrollers -> 8-bit MCU -> microcontroller -> embedded processor -> semiconductor. It targets cost-sensitive and pin-constrained designs where a full 28- or 40-pin MCU would be wasteful. Key features of the PIC12F509-E/SN include six general-purpose digital I/O pins (each capable of independent direction control), one 8-bit timer/counter (TMR0) with a programmable prescaler, a watchdog timer with its own on-chip RC oscillator for reliable reset behavior, and an internal 4 MHz oscillator that eliminates the need for an external crystal. Power-on reset, brown-out detect, and code protection round out the integrated feature set, all in a 150-mil wide 8-SOIC footprint that reflow-solders with standard lead-free profiles. The device uses a RISC-like architecture with only 33 single-word/12-bit instructions, so the MCU typically achieves a 2:1 code compression over comparable 8-bit CISC competitors. CMOS process technology provides low power consumption, with sleep currents in the microamp range and operating currents typically below 1 mA at 4 MHz/5V, making the part attractive for battery-powered applications. Typical applications include consumer electronics remote controls, battery chargers, LED drivers, small appliance controllers, sensor signal conditioning, and hobby/educational projects. The PIC12F509-E/SN is also widely used as a low-cost "glue logic" replacement where a handful of discrete components can be replaced by programmable logic. When designing with this MCU, allocate one or two I/O pins for ICSP (ICSPCLK/ICSPDAT) if you plan to re-program in-circuit. Use the configuration bits to select the oscillator mode, watchdog enable, and code protection; these fuses are programmed once and govern the device's behavior at every reset. The -E (extended) temperature grade supports -40C to +125C operation, broader than the -I (industrial) -40C to +85C grade. This page synthesizes distributor pricing, drop-in package alternatives, and practical design notes that are not found in the standalone manufacturer datasheet.

見積もりお問い合わせ

PIC12F509-I/MC

PIC12F509-I/MC - 8-bit MCU, 1.5KB Flash, 4MHz INTOSC, 8-DFN | Microchip

The Microchip Technology PIC12F509-I/MC is a low-cost, high-performance 8-bit CMOS Flash microcontroller in an 8-pin DFN (2x3 mm) package, featuring 1.5KB (1K x 12) of Flash program memory, 41 bytes of RAM, and a 4 MHz internal oscillator. Operating from 2.0V to 5.5V across -40C to +85C industrial temperature range, it delivers RISC performance with only 33 single-word single-cycle instructions to learn. An 8-bit microcontroller (MCU) is a small, self-contained computer-on-a-chip built around an 8-bit data path, integrating a CPU, program memory (ROM/Flash), data memory (RAM), and peripherals such as timers, ADC, and GPIO into a single IC. 8-bit MCUs sit within the microcontroller hierarchy as embedded controllers -> microcontrollers -> microcomputer family -> integrated circuits -> semiconductors, occupying the low-cost, low-power end of the MCU spectrum versus 16-bit and 32-bit alternatives. They are best suited for cost-sensitive applications where software complexity and processing throughput remain modest. Key features of the PIC12F509 include 33 single-word instructions at 1 microsecond instruction cycle, an internal 4 MHz oscillator with 6 I/O pins (5 bidirectional, 1 input-only), a Watchdog Timer with on-chip RC oscillator for reliable operation, and In-Circuit Serial Programming (ICSP) for field-upgradeable firmware. The device supports power-managed modes including Sleep and wake-on-pin-change for ultra-low standby power consumption. The PIC12F509 architecture uses a Harvard RISC core with separate program and data buses, a 12-bit wide instruction word, and a hardware stack that simplifies subroutine handling. Its 6 I/O pins include GP0-GP5 with multi-function capability (digital I/O, comparator input, timer I/O), one 8-bit timer/counter (TMR0) with 8-bit prescaler, and an integrated analog comparator. With 1.5KB Flash, it targets code sizes up to roughly 1000 instructions typical. Typical applications include battery-powered consumer products, LED drivers, simple motor control, sensor signal conditioning, and any small-form-factor embedded control where the 8-DFN footprint saves board space. The 8-pin DFN package makes it ideal for ultra-compact designs including wearables, IoT edge nodes, and smart sensors. When designing with the PIC12F509, note that only 5 of 6 I/O pins are fully bidirectional; GP3 is input-only. For applications requiring more I/O, consider PIC16F15313 (recommended upgrade). The internal 4 MHz oscillator can drift with temperature - for precision timing use an external crystal or the PIC12F1840 variant. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, providing the engineering context needed for sourcing and board-level design decisions.

見積もりお問い合わせ

PIC12F509-I/MS

PIC12F509-I/MS - 8-Bit MCU, 1.5KB Flash, 4MHz, 8-MSOP | Microchip

The Microchip Technology PIC12F509-I/MS is an 8-bit, fully-static, Flash-based CMOS microcontroller from the PIC® 12F family, delivering 4 MIPS performance from a 33-instruction RISC core with 1.5KB (1K x 12) of program memory and 41 bytes of RAM, packaged in an 8-pin MSOP. Operating from 2.0V to 5.5V, it integrates a 4MHz internal oscillator, 6 I/O pins, a 4-channel 8-bit ADC, and one 8-bit timer/counter. What is a microcontroller? A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (Flash for program storage, SRAM for data, EEPROM for non-volatile data), peripherals (ADC, timers, communication interfaces), and clock management on one die. MCUs form the "brain" of embedded systems - they sit in the device hierarchy between discrete logic ICs and full microprocessors (MPUs). Within Microchip's portfolio, PIC® microcontrollers span 8-bit (PIC10/12/16/18), 16-bit (dsPIC®/PIC24), and 32-bit (PIC32) architectures. The PIC12F family targets the lowest-cost, lowest-pin-count applications with 6-8 I/O, making it the PIC® equivalent of an 8-pin glue-logic replacement. Key features of the PIC12F509 include in-circuit serial programming (ICSP™), a watchdog timer with on-chip RC oscillator, power-on reset, brown-out detect, and an internal 4MHz precision oscillator that eliminates the need for an external crystal in most designs. The Flash memory supports 100,000 erase/write cycles typical and 40-year data retention, while the device consumes less than 1 mA active at 4MHz/5V. Architecturally, the PIC12F509 employs a Harvard RISC architecture with separate program and data buses, 12-bit-wide instruction words, and a two-stage pipeline that executes most instructions in a single cycle. The RISC core provides deterministic interrupt latency and predictable execution timing, while the integrated peripherals are mapped into a unified I/O space accessible through special-function registers (SFRs). Typical applications include low-cost consumer appliances, battery-powered sensor nodes, LED lighting controllers, simple motor control loops, and pin-compatible upgrades for legacy PIC12C508/PIC12C509 designs. The 8-pin MSOP footprint offers a compact form factor for space-constrained designs. When designing with the PIC12F509, ensure the ICSP™ programming pins (GP0/GP1) are accessible via test points or a programming header. The internal 4MHz oscillator is factory calibrated to ±1% typical at 5V/25°C but drifts with temperature and voltage - critical timing applications may require an external crystal via the PIC12F609/PIC12F615 family instead.

見積もりお問い合わせ

PIC12F509-I/P

PIC12F509-I/P - 8-Bit 4MHz 1.5KB Flash MCU | Microchip 8-PDIP

The Microchip Technology PIC12F509-I/P is an 8-bit Flash-based CMOS microcontroller from the PIC® 12F family, offering 1.5KB (1K x 12) of program memory and operating at up to 4MHz internal oscillator, all housed in a through-hole 8-pin PDIP (0.300 inch, 7.62mm) package. Per the Microchip datasheet, the device features 41 bytes of RAM, 6 I/O pins, an 8-bit timer/counter, and an integrated 4MHz RC oscillator. A microcontroller (MCU) is a single-chip computer containing a processor core, memory, and programmable I/O peripherals. Within the embedded semiconductor hierarchy, the PIC12F509 sits as an 8-bit Flash MCU under Microchip's PIC® 12F sub-family of baseline microcontrollers, suitable for simple control tasks. It uses a RISC architecture with only 33 single-word/single-cycle instructions, simplifying code development while maintaining deterministic execution. Key features include 1.5KB of self-programmable Flash program memory, an internal 4MHz precision oscillator (no external crystal required), 6 general-purpose digital I/O pins with individual direction control, 41 bytes of RAM, and 64 bytes of non-volatile EEPROM data memory. The device operates over an industrial -40C to +85C temperature range and supports in-circuit serial programming (ICSP) via the GP0/GP1 pins, allowing firmware updates after PCB assembly. The PIC12F509 employs a Harvard architecture with separate program and data buses, a 14-bit instruction word, and a two-stage pipeline that fetches and executes instructions in a single clock cycle (except for branches). This compact architecture yields typical 2:1 code compression over competing 8-bit MCUs in its class and predictable interrupt latency, which simplifies real-time firmware design. Typical applications include low-cost consumer appliances, battery-powered sensor nodes, LED driver controllers, simple motor control (small DC fans, solenoids), and hobby/educational projects. The wide operating voltage of 2.0V to 5.5V makes it ideal for 3V coin-cell and 2xAA battery systems where low component count is critical. When designing with this device, allocate the GP3 pin carefully because it is input-only (no output driver). Use a 0.1uF decoupling capacitor within 5mm of the VDD pin, and place a 10kohm pull-up on the MCLR pin unless the internal MCLR feature is enabled in the configuration word. This page synthesizes real-time distributor pricing, drop-in same-package alternatives, AEO-optimized FAQs, and PCB-level design notes not found in a single manufacturer datasheet view.

見積もりお問い合わせ

PIC12F509-I/SN

PIC12F509-I/SN - 8-Bit 4MHz MCU, 1.5KB Flash | Microchip

The Microchip Technology PIC12F509-I/SN is an 8-bit Flash microcontroller based on the PIC12 core, delivering 4 MIPS performance at 4 MHz from a 33-instruction RISC instruction set. It integrates 1.5 KB (1K x 12 words) of Flash program memory, 41 bytes of RAM, and 41 bytes of EEPROM-style data EEPROM in an 8-pin SOIC (SN) package, providing one of the smallest pin-count footprints in the PIC10/12 family. A microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory (Flash/ROM), working RAM, and configurable I/O peripherals. The PIC12F509 belongs to the 8-bit PIC10/12 baseline/enhanced mid-range hierarchy, sitting between the even smaller 6/8-pin PIC10F family and the 14/20-pin PIC16F family. Its 8-bit Harvard architecture with separate program and data buses allows single-cycle instruction execution, and its 12-bit wide instruction word delivers the typical 2:1 code compression over competitive 8-bit MCUs of its class. Key features include an internal 4 MHz RC oscillator with calibrated accuracy of typically ±1%, six general-purpose digital I/O pins (one input-only GP3), one 8-bit timer/counter (Timer0), a watchdog timer with its own on-chip RC oscillator for reliable operation, and an in-circuit serial programming (ICSP) interface. The device supports a wide 2.0V to 5.5V operating voltage range and the industrial -40C to +85C temperature range, making it suitable for both battery-powered consumer products and harsh-environment embedded nodes. The PIC12F509's power-on reset, brown-out detect, and code-protection features are all integrated on-chip, eliminating external reset supervisors. Its ultra-low power architecture typically draws less than 1 mA active at 4 MHz / 5V and only microamperes in sleep, qualifying it for energy-harvesting and always-on sensor applications. Typical applications include battery-powered timer/sequencer modules, LED blinkers, replacement of discrete logic gates with software, simple sensor signal conditioning, low-end consumer appliances, and IoT edge-node controllers. The 8-pin SOIC footprint makes hand-soldering and breadboarding straightforward for hobbyists and rapid prototyping. When designing with this part, allocate one I/O pin to MCLR (reset) if you need external reset, or leave it tied to VDD through a resistor for the internal reset configuration. The ICSP pins (GP1/GP0) are shared with GPIO, so plan your pinout to keep PGD/PGC available during in-circuit programming. This page synthesizes distributor stock levels, drop-in SOIC-8 alternatives, and practical design notes not consolidated in the manufacturer datasheet alone, giving procurement and embedded engineers a single reference for evaluation, replacement, and board bring-up.

見積もりお問い合わせ

サブカテゴリ

製品 (38,000+)

PIC12F1822T-I/RF - 8-Bit MCU, 3.5KB Flash, 32MHz, 8-UDFN | Microchip

PIC12F1840-E/MF - 8-bit 32MHz 7KB Flash MCU 8-DFN | Microchip

PIC12F1840-E/P - 8-bit MCU, 7KB Flash, nanoWatt XLP DIP-8

PIC12F1840-E/SN - 8-bit 32MHz 7KB Flash MCU | Microchip | SOIC-8

PIC12F1840-I/P - 8-bit 32MHz XLP MCU 7KB Flash | Microchip

PIC12F1840-I/SN - 8-bit XLP MCU 32MHz 7KB Flash SOIC-8 | Microchip

PIC12F1840T-I/RF - 8-bit 32MHz XLP MCU 7KB Flash | Microchip

PIC12F508-E/MC - 8-bit 4MHz Flash MCU, 768B, 8-DFN | Microchip

PIC12F508-E/MS - 8-Bit 4MHz MCU 768B Flash MSOP | Microchip

PIC12F508-E/P - 4MHz 8-Bit Flash MCU | Microchip

PIC12F508-E/SN - 8-Bit 4MHz Flash MCU, 768B, 6 I/O | Microchip

PIC12F508-I/MC - 8-bit Flash MCU, 4MHz, 768B Flash | Microchip

PIC12F508-I/MS - 8-bit 4MHz Flash MCU 768B | Microchip

PIC12F508-I/P - 8-bit Flash MCU, 4MHz, 768B Flash, 6 I/O | Microchip

PIC12F508-I/SN - 8-bit 4MHz MCU 768B Flash 8-SOIC | Microchip

PIC12F508T-E/SN - 8-bit Flash MCU, 4MHz, 768B Flash, 8-SOIC | Microchip

PIC12F509-E/MC - 8-bit Flash MCU, 4MHz, 1.5KB | Microchip

PIC12F509-E/MS - 8-Bit 4MHz MCU 1.5KB Flash MSOP-8 | Microchip

PIC12F509-E/P - 4MHz 8-Bit Flash MCU | Microchip

PIC12F509-E/SN - 8-bit MCU, 1.5KB Flash, 4MHz, 8-SOIC | Microchip

PIC12F509-I/MC - 8-bit MCU, 1.5KB Flash, 4MHz INTOSC, 8-DFN | Microchip

PIC12F509-I/MS - 8-Bit MCU, 1.5KB Flash, 4MHz, 8-MSOP | Microchip

PIC12F509-I/P - 8-Bit 4MHz 1.5KB Flash MCU | Microchip 8-PDIP

PIC12F509-I/SN - 8-Bit 4MHz MCU, 1.5KB Flash | Microchip