マイクロコントローラ

製品 (18177)

ATMEGA169PV-8MCHR - AVR 8-bit MCU, 8MHz, LCD | Microchip
ATMEGA169PV-8MCHR

ATMEGA169PV-8MCHR - AVR 8-bit MCU, 8MHz, LCD | Microchip

The Microchip Technology ATMEGA169PV-8MCHR is a low-power AVR 8-bit microcontroller with 16KB of in-system programmable FLASH, 1KB SRAM, 512B EEPROM, and an integrated LCD controller, running at up to 8MHz in a 64-pin dual-row QFN (7x7 mm) package with NiPdAu finish on industry tape and reel. An AVR ATmega microcontroller is a member of the 8-bit AVR enhanced RISC family - a Harvard-architecture voltage regulator of the embedded control world in the sense that it sits at the core of power management and display systems. The AVR executes most of its 131 powerful instructions in a single clock cycle, achieving up to 16 MIPS throughput, which classifies it among high-performance 8-bit MCUs within the broader microcontroller and embedded processor hierarchy. Key features include a 16K x 16 organized FLASH (8K x 16 words), self-programming boot capability, an 8-channel 10-bit ADC, a JTAG interface for on-chip debugging and boundary scan, and a segment LCD driver capable of up to 4 commons x 25 segments. The ATMEGA169PV 'V' variant offers a wide 1.8V to 5.5V supply range, supporting battery-powered and LCD-display applications across the full industrial temperature range. Architecturally, the device combines an advanced RISC CPU with 32 general-purpose working registers, fully static operation, two 8-bit timers, one 16-bit timer with PWM, a USI/UART-class serial interface, and an internal RC oscillator - minimizing external component count. The LCD controller, a hallmark of the ATmega169 family, drives glass directly, making it a classic choice for metering and appliance front panels. Typical applications include utility meters, thermostats and HVAC controllers, handheld instruments, and any battery-operated product that requires an integrated segment-LCD display with low active and sleep current. Design consideration: at 8MHz maximum clock, budget code size carefully - 16KB FLASH with 1KB SRAM is ample for LCD metering firmware but tight for protocol stacks; use the 512B EEPROM for calibration constants and wear-level writes. This page synthesizes distributor availability data, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet.

USD $2.21 在庫あり
ATMEGA169PV-8MCU - 8-bit AVR MCU 16KB Flash 8MHz | Microchip
ATMEGA169PV-8MCU

ATMEGA169PV-8MCU - 8-bit AVR MCU 16KB Flash 8MHz | Microchip

The Microchip Technology ATMEGA169PV-8MCU is an 8-bit AVR ATmega microcontroller with 16KB (8K x 16) In-System Programmable FLASH, 1KB SRAM, an 8 MHz maximum clock speed and 53 general-purpose I/O lines, housed in a 64-pin QFN (7x7 mm, dual-row, exposed pad) package. An 8-bit microcontroller is a single-chip processor that moves and computes data 8 bits at a time, integrating CPU, program memory, RAM, peripherals and I/O on one die. Within the embedded systems hierarchy, the ATMEGA169PV-8MCU sits in the AVR ATmega family, itself a branch of the microcontroller -> integrated circuit -> semiconductor taxonomy, and competes with PIC16 and 8051-class devices. Key features include the AVR advanced RISC architecture with 133 powerful instructions, most executing in a single clock cycle, which yields high code efficiency at 8 MHz. The 16KB self-programmable FLASH supports In-System Programming (ISP), reducing field-update cost. The 8-channel/8x 10-bit ADC supports analog sensor inputs, and the wide 2.7V to 5.5V supply range (3V-class operation) suits both 3.3V and 5V systems. The picoPower-class P suffix indicates low-power operation for battery designs. Technically, the device executes most instructions in one cycle through a Harvard-architecture pipeline with separate program and data buses, sustaining close to 1 MIPS per MHz. Memory is organized as 8K x 16 FLASH words plus 1KB internal SRAM and 512B EEPROM for non-volatile parameter storage. Typical applications include battery-powered instruments, LCD-based consumer appliances, industrial control nodes and sensor acquisition systems where the 10-bit ADC and 53 I/O lines interface directly to keys, displays and actuators. Design consideration: at 5V/8MHz observe the datasheet frequency-versus-voltage safe operating region; run 8 MHz only at 4.5V or above and reduce f_MAX at lower VCC. This page synthesizes distributor pricing, drop-in alternatives, comparison tables and practical design notes not found in the manufacturer datasheet, adding unique sourcing and engineering value.

USD $1.72 在庫あり
ATMEGA169V-1AC - 8-bit AVR MCU, 16KB Flash, LCD Driver | Microchip
ATMEGA169V-1AC

ATMEGA169V-1AC - 8-bit AVR MCU, 16KB Flash, LCD Driver | Microchip

The Microchip Technology ATMEGA169V-1AC is a low-power 8-bit AVR RISC microcontroller with 16KB self-programming Flash program memory, 1KB SRAM, 512 bytes EEPROM, an integrated 4x25 segment LCD driver, and a 64-pin TQFP (14x14 mm) package. It executes up to 16 MIPS at 16 MHz and is rated at 1 MHz operation for the low-voltage V grade. An AVR microcontroller is an 8-bit MCU family built on an enhanced RISC architecture in which most of the 130 instructions execute in a single clock cycle, placing it in the broader hierarchy of embedded microcontrollers within the semiconductor device family. ATmega devices combine program Flash, data SRAM, and EEPROM on one die with peripheral sets such as ADCs, timers, UARTs, and SPI. Key features of the ATMEGA169V-1AC include 16KB (8K x 16 organization) In-System Self-Programmable Flash, an 8-channel 10-bit ADC, a JTAG interface for on-chip debugging and boundary scan, and the distinguishing 4x25 segment LCD controller that few 8-bit MCUs integrate on-chip. The V suffix denotes the low-voltage operating grade, making it suitable for battery-powered instruments where 1.8V operation extends cell life. Architecturally, the device uses a Harvard-structure AVR core with 32 general-purpose working registers directly connected to the ALU, allowing single-cycle arithmetic between registers. Self-programming Flash enables boot-loader firmware updates in the field, and the JTAG port supports on-chip debug without additional external emulators. Typical applications include battery-operated meters with LCD displays, handheld instruments, utility metering, and industrial panels where the integrated LCD driver removes the need for an external segment driver. Design consideration: verify the maximum clock frequency against the actual supply voltage, because the V-grade frequency derates at the low end of the supply range. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet.

USD $3.98 在庫あり
ATMEGA169V-1MC - AVR 8-bit MCU, 16KB Flash, LCD Driver | Microchip
ATMEGA169V-1MC

ATMEGA169V-1MC - AVR 8-bit MCU, 16KB Flash, LCD Driver | Microchip

The Microchip (Atmel) ATMEGA169V-1MC is a low-power AVR 8-bit microcontroller featuring 16KB self-programming Flash program memory, 1KB SRAM, and 512B EEPROM, housed in a 64-pin QFN (9x9 mm) exposed-pad package. It operates from 1.8V to 5.5V at a maximum clock frequency of 1MHz (V voltage-grade variant) and integrates an 8-channel 10-bit ADC, a 4x25 segment LCD driver, and a JTAG interface for on-chip debug. An 8-bit AVR microcontroller is a single-chip computer built around the AVR enhanced RISC architecture, in which most of its 130 powerful instructions execute in a single clock cycle. Within the power-management hierarchy, it spans the microcontroller -> embedded processor -> integrated circuit taxonomy and competes in the general-purpose MCU class alongside the PIC, MSP430, and STM8 families. Key differentiating features include the integrated LCD driver capable of driving up to 4 backplanes x 25 segments - eliminating an external LCD controller in battery-powered displays - plus self-programming Flash for field firmware updates, an on-chip JTAG debug interface, and a 10-bit ADC with up to 8 multiplexed single-ended input channels. Architecturally, the ATmega169 combines 32 general-purpose working registers, hardware multiply, two 8-bit and one 16-bit timer with PWM capability, a USART, an SPI interface, and a two-wire (I2C-compatible) interface. Achieving up to 16 MIPS throughput at 16MHz on faster speed-grade variants, the V-grade ATMEGA169V-1MC trades speed for an ultra-wide 1.8V supply window, suiting single-cell or coin-cell powered designs. Typical applications include battery-operated metering displays, handheld instruments with segment LCDs, industrial control panels, and consumer appliance user interfaces where low-voltage operation and integrated LCD drive reduce system cost. Design consideration: the V-grade 1MHz limit applies across the full 1.8V supply range; if higher throughput is needed, verify the speed/voltage/frequency derating curve in the manufacturer datasheet before selection. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet, offering information gain beyond standard catalog listings.

USD $2.68 在庫あり
ATMEGA169V-8AI - 8-bit AVR MCU, 16KB Flash, LCD | Microchip
ATMEGA169V-8AI

ATMEGA169V-8AI - 8-bit AVR MCU, 16KB Flash, LCD | Microchip

The Microchip Technology ATMEGA169V-8AI is an 8-bit AVR ATmega microcontroller with 16KB (8K x 16) In-System Programmable Flash, 1KB SRAM, 512B EEPROM, and an on-chip LCD controller, executing at up to 8MHz in a 64-TQFP (14x14 mm) surface-mount package with industrial temperature rating of -40C to +85C. An 8-bit microcontroller is a single-chip computer integrating a processor core, program memory, data memory, and peripherals on one die. Within the power-management and embedded-system hierarchy, the ATmega family sits in the general-purpose MCU class: microcontroller -> embedded processor -> semiconductor. AVR MCUs are widely used where low power, simple tooling, and deterministic single-cycle RISC execution matter. Key features include 131 powerful AVR instructions with mostly single-clock execution, 32 general-purpose working registers, 54 general-purpose I/O lines, and full static operation for up to 16 MIPS throughput at 16MHz (8MHz max for the V grade). The wide 1.8V to 5.5V supply range supports battery-powered designs directly from two AA cells to 5V logic. Technical depth: the ATmega169 integrates a complete on-chip LCD controller with internal step-up voltage, driving segmented LCDs without external charge-pump ICs. An 8-channel 10-bit ADC, three flexible timers with PWM, a JTAG interface for boundary scan, on-chip debugging and In-System Programming, and SPI/USART serial interfaces round out the peripheral set. Read-While-Write Flash allows firmware updates during operation. Typical applications include battery-operated devices with segmented LCD displays (meters, thermostats, hand-held instruments), industrial automation nodes, and consumer electronics human-machine interfaces. Design consideration: the V grade limits clocking to 8MHz; at 5V and 8MHz, keep Flash write cycles within datasheet endurance of 10,000 cycles and use the internal RC oscillator or external crystal per the system clock options. This page synthesizes distributor pricing, verified drop-in alternatives, LCD-driver design notes, and FAQ content not found in the manufacturer datasheet alone.

USD $2.58 在庫あり
ATMEGA169V-8MI - 8MHz AVR MCU 16KB Flash 64-QFN | Microchip
ATMEGA169V-8MI

ATMEGA169V-8MI - 8MHz AVR MCU 16KB Flash 64-QFN | Microchip

The Microchip Technology ATMEGA169V-8MI is a low-power 8-bit AVR RISC microcontroller with 16KB of in-system programmable Flash, 1KB of SRAM, and 512B of EEPROM, running at up to 8MHz and housed in a 64-pin VQFN (9x9 mm) package with exposed pad. It operates from 2.7V to 5.5V, making the V (low-voltage) speed grade ideal for battery-powered designs. A microcontroller (MCU) is a single-chip computer that integrates a processor core, memory, and programmable peripherals on one die. The ATmega169V belongs to the AVR ATmega family of 8-bit microcontrollers, which sits within Microchip's broader embedded processor portfolio. AVR cores execute most instructions in a single clock cycle, and this device achieves up to 8 MIPS throughput at 8MHz thanks to its advanced RISC architecture with 131 instructions and 32 general-purpose working registers. Key features include 16KB self-programming Flash with 10,000 write-cycle endurance, an 8-channel 10-bit ADC for analog signal acquisition, a JTAG interface for on-chip debugging and boundary scan, and connectivity via SPI and USART plus the Universal Serial Interface (USI). The device also integrates a real-time counter with separate oscillator, four timers (two 8-bit, one 16-bit plus RTC), analog comparator, and brown-out detection for supply-glitch resilience. Architecturally, the AVR uses a Harvard structure with separate program and data buses, allowing Flash fetches and SRAM access in parallel. In-system programmability permits firmware updates after assembly, while the JTAG debug system enables breakpoint and single-step debugging without external emulators. Power management modes include idle, ADC noise reduction, power-save, and power-down for microamp-level sleep currents, which is why the V-variant is popular in coin-cell and battery instruments. Typical applications include LCD-based handheld meters, industrial sensor nodes, HVAC control boards, and battery-powered instrumentation where 2.7V operation and low sleep current are essential. When designing, decouple both VCC pairs with 100nF ceramics placed close to the 9x9 QFN power pins, and use the exposed pad as a solid ground connection; do not leave VAGND floating or ADC accuracy will degrade. This page synthesizes distributor availability, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $3.20 在庫あり
ATMEGA169V-8MU - 8-bit AVR MCU 16KB 64QFN | Microchip
ATMEGA169V-8MU

ATMEGA169V-8MU - 8-bit AVR MCU 16KB 64QFN | Microchip

The Microchip Technology ATMEGA169V-8MU is an 8-bit AVR RISC microcontroller with 16KB of in-system programmable Flash, 1KB SRAM, 512B EEPROM, and an 8-channel 10-bit ADC, rated for operation up to 8 MHz from 2.7V to 5.5V, housed in a 64-pin QFN (9x9 mm) package with exposed pad. An 8-bit microcontroller is a complete computer system on a single chip that integrates a processor core, program memory, data memory, and peripherals such as timers, ADCs, and serial interfaces. Within the embedded systems hierarchy, the ATmega family sits in the general-purpose MCU category, positioned below 32-bit MCUs in processing power but excelling in simplicity, cost, and power efficiency for control-oriented tasks. Key differentiating features include the AVR enhanced RISC architecture executing 131 mostly single-cycle instructions for up to 16 MIPS at 16 MHz (8 MIPS at the 8 MHz rating of this V-grade part), JTAG interface for on-chip debug and boundary-scan, and in-system self-programming Flash that enables field firmware updates. The V suffix denotes the low-voltage grade, supporting full functionality down to 2.7V for battery-powered designs. Technically, the ATmega169 is a fully static CMOS design with an AVR core, 32 general-purpose working registers directly connected to the ALU, allowing one-cycle execution of most instructions. Peripheral set includes two 8-bit timers, one 16-bit timer, USART, SPI, two-wire interface, analog comparator, and the LCD controller variant heritage makes this family popular in segmented display applications. Typical applications include battery-powered instruments, LCD-based consumer devices, industrial sensors, and hand-held meters where low-voltage operation and 64 I/O-rich pin count are required. When designing with this device, account for the 8 MHz maximum clock of the V grade; designs needing 16 MHz operation should select the standard grade variant. Supply decoupling and proper JTAG fuse configuration are common integration points. This page synthesizes distributor availability data, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, with pricing and stock referenced as of 2026-09-17.

見積もり 在庫あり
ATMEGA16A-AU - 16KB Flash AVR MCU 16MHz TQFP-44 | Microchip
ATMEGA16A-AU

ATMEGA16A-AU - 16KB Flash AVR MCU 16MHz TQFP-44 | Microchip

The Microchip ATMEGA16A-AU is a low-power, high-performance 8-bit AVR RISC microcontroller with 16KB of In-System Programmable Flash, 1024 bytes of SRAM, 512 bytes of EEPROM, and a maximum clock frequency of 16 MHz, housed in a 44-pin TQFP (10x10 mm) surface-mount package. It operates from a 2.7V to 5.5V supply. A microcontroller (MCU) is a single-chip computer that integrates a processor core, program memory, data memory, and peripherals such as timers, communication interfaces, and analog-to-digital converters. Within the semiconductor hierarchy, the ATmega16A belongs to the AVR family of enhanced RISC microcontrollers, a product category under Microchip's 8-bit MCU portfolio used for embedded control in industrial, consumer, and automotive-adjacent systems. Key features include 133 powerful instructions with mostly single-cycle execution, delivering throughput approaching 1 MIPS per MHz. The device integrates an 8-channel 10-bit ADC, a JTAG interface for on-chip debugging and boundary scan, and self-programming Flash that supports field firmware updates. Three flexible timers (two 8-bit and one 16-bit with PWM outputs), a full-duplex USART, SPI, and TWI (I2C-compatible) interfaces round out the peripheral set. Architecturally, the AVR core uses a Harvard structure with separate program and data buses, allowing an instruction to be fetched while the previous one executes. This single-cycle instruction fetch/execute pipeline is the reason the family achieves near 1 MIPS/MHz efficiency without pipelining complexity. The ATmega16A is a process-shrunk refresh of the original ATmega16; per Microchip application note AVR522, it is a functionally identical, drop-in replacement for the ATmega16, though some electrical characteristics differ slightly due to the new manufacturing process. Typical applications include industrial automation and motor control, consumer appliances, battery-powered instrumentation, and embedded hobby/education platforms. The 10-bit ADC suits sensor acquisition, while JTAG debugging shortens development cycles. Design considerations: keep the 16 MHz maximum clock in mind when budgeting processing headroom, and use the internal RC oscillator (up to 8 MHz) to save a crystal in cost-sensitive designs. This page adds value beyond the manufacturer datasheet by synthesizing drop-in alternatives, comparison tables, design notes, and sourcing guidance in one place.

USD $2.05 在庫あり
ATMEGA16A-AUR - 8-bit AVR MCU, 16KB Flash, 44-TQFP | Microchip
ATMEGA16A-AUR

ATMEGA16A-AUR - 8-bit AVR MCU, 16KB Flash, 44-TQFP | Microchip

The Microchip Technology ATMEGA16A-AUR is an 8-bit AVR enhanced RISC microcontroller with 16KB self-programming Flash, 1KB SRAM, 512B EEPROM, and a 16 MHz maximum clock, housed in a 44-pin TQFP (10 x 10 mm) package. A microcontroller unit (MCU) integrates a processor core, memory, and peripherals on a single silicon die, forming the lowest level of the embedded-system hierarchy: semiconductor -> integrated circuit -> microcontroller -> application-specific embedded controller. The AVR family uses a Harvard architecture with single-cycle instruction execution, allowing throughputs approaching 1 MIPS per MHz so designers can optimize power consumption versus processing speed. Key features include 133 powerful RISC instructions, most executed in a single clock cycle; 32 x 8-bit general purpose working registers; an 8-channel 10-bit ADC; and an on-chip JTAG interface supporting boundary-scan and on-chip debugging. The device operates from 2.7V to 5.5V, covering both 3.3V and 5V logic systems, and provides three flexible timers/counters with PWM outputs plus a hardware USART for serial communication. Architecturally, the ATmega16A is a die shrink of the original ATmega16 on a smaller process node, reducing power draw while preserving the pinout and peripheral set. The 16KB self-programmable Flash supports boot-loader based field firmware updates, while the separate 512-byte EEPROM retains calibration data through power cycles. Typical applications include industrial automation controllers, motor control nodes, sensor data loggers, home appliances, and general-purpose embedded control boards where a 5V-tolerant MCU with integrated ADC and PWM is preferred. A key design consideration: at 5V the ATmega16A is rated up to 16 MHz, but at 3.3V operation the safe maximum frequency is lower per the datasheet frequency-versus-voltage curve, so clock configuration must match the supply rail. This page adds value beyond the datasheet by synthesizing distributor pricing tiers, drop-in alternatives, and practical design notes in one place.

USD $2.14 在庫あり
ATMEGA16A-MU - 8-Bit AVR MCU 16KB Flash 16MHz | Microchip (Tape & Reel)
ATMEGA16A-MU

ATMEGA16A-MU - 8-Bit AVR MCU 16KB Flash 16MHz | Microchip (Tape & Reel)

The Microchip Technology ATMEGA16A-MU is an 8-bit AVR RISC microcontroller with 16 KB of self-programming Flash, 1 KB SRAM, and 512 B EEPROM, running at up to 16 MHz and delivering up to 16 MIPS throughput, housed in a 44-pin VQFN (7x7 mm) package with exposed pad. It operates from 2.7 V to 5.5 V and integrates an 8-channel 10-bit ADC, JTAG debug interface, and 32 general-purpose I/O lines. An 8-bit microcontroller (MCU) is a single-chip computer that combines a CPU, program memory, data memory, and peripherals such as timers, serial interfaces, and analog-to-digital converters on one die. Within the semiconductor taxonomy, the ATmega16A sits under 8-bit MCU -> microcontroller -> embedded processor -> integrated circuit, and it is the AVR-family workhorse for cost-sensitive control tasks where deterministic single-cycle execution matters more than raw clock speed. Key differentiators include 131 powerful instructions with most executing in a single clock cycle, 16 MIPS throughput at 16 MHz, and a fully static core that can be clocked down to DC for low-power operation. The 8-channel 10-bit successive-approximation ADC, two USARTs, SPI, and TWI (I2C) interfaces cover the majority of embedded control and sensor-interface requirements without external glue logic. The ATmega16A is fabricated in a low-power CMOS process and is a functionally identical, drop-in replacement for the original ATmega16, per Microchip application note AVR522. The VQFN-44 (7x7 mm) package with exposed pad provides a compact footprint for space-constrained designs while retaining the full 32 I/O lines of the TQFP-44 variant. Typical applications include industrial control panels, motor and relay drivers, battery chargers, sensor hubs, and legacy embedded systems that require long-term availability. The wide 2.7 V to 5.5 V supply range allows direct operation from 3.3 V or 5 V rails, and the on-chip JTAG interface supports in-system programming and debugging without a dedicated programmer. When designing with the ATMEGA16A-MU, decouple every VCC pin with a 100 nF ceramic capacitor placed within a few millimeters of the pin, and connect the exposed pad to a solid ground plane for thermal and noise performance. The internal calibrated RC oscillator allows operation without an external crystal, but an external 16 MHz crystal is recommended when precise UART baud rates or tight timing are required. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a single reference for selection, replacement, and layout decisions.

USD $2.64 在庫あり
ATMEGA16A-MUR - 8-Bit AVR MCU 16KB Flash 16MHz | Microchip
ATMEGA16A-MUR

ATMEGA16A-MUR - 8-Bit AVR MCU 16KB Flash 16MHz | Microchip

The Microchip Technology ATMEGA16A-MUR is an 8-bit AVR RISC microcontroller with 16 KB of self-programming Flash, 1 KB SRAM, and 512 B EEPROM, running at up to 16 MHz and delivering up to 16 MIPS throughput, housed in a 44-pin VQFN (7x7 mm) package with exposed pad. It operates from 2.7 V to 5.5 V and integrates an 8-channel 10-bit ADC, JTAG debug interface, and 32 general-purpose I/O lines. An 8-bit microcontroller (MCU) is a single-chip computer that combines a CPU, program memory, data memory, and peripherals such as timers, serial interfaces, and analog-to-digital converters on one die. Within the semiconductor taxonomy, the ATmega16A sits under 8-bit MCU -> microcontroller -> embedded processor -> integrated circuit, and it is the AVR-family workhorse for cost-sensitive control tasks where deterministic single-cycle execution matters more than raw clock speed. Key differentiators include 131 powerful instructions with most executing in a single clock cycle, 16 MIPS throughput at 16 MHz, and a fully static core that can be clocked down to DC for low-power operation. The 8-channel 10-bit successive-approximation ADC, two USARTs, SPI, and TWI (I2C) interfaces cover the majority of embedded control and sensor-interface requirements without external glue logic. The ATmega16A is fabricated in a low-power CMOS process and is a functionally identical, drop-in replacement for the original ATmega16, per Microchip application note AVR522. The VQFN-44 (7x7 mm) package with exposed pad provides a compact footprint for space-constrained designs while retaining the full 32 I/O lines of the TQFP-44 variant. Typical applications include industrial control panels, motor and relay drivers, battery chargers, sensor hubs, and legacy embedded systems that require long-term availability. The wide 2.7 V to 5.5 V supply range allows direct operation from 3.3 V or 5 V rails, and the on-chip JTAG interface supports in-system programming and debugging without a dedicated programmer. When designing with the ATMEGA16A-MUR, decouple every VCC pin with a 100 nF ceramic capacitor placed within a few millimeters of the pin, and connect the exposed pad to a solid ground plane for thermal and noise performance. The internal calibrated RC oscillator allows operation without an external crystal, but an external 16 MHz crystal is recommended when precise UART baud rates or tight timing are required. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a single reference for selection, replacement, and layout decisions.

USD $2.64 在庫あり
ATMEGA16HVA-4CKU - AVR 8-bit MCU 16KB Flash 36-LGA | Microchip
ATMEGA16HVA-4CKU

ATMEGA16HVA-4CKU - AVR 8-bit MCU 16KB Flash 36-LGA | Microchip

The Microchip Technology ATMEGA16HVA-4CKU is a battery-management AVR 8-bit microcontroller delivering 16KB (8K x 16) of FLASH program memory, a maximum clock frequency of 4 MHz, and operation from a 2.5V/3.3V/5V supply range, housed in a 36-pin LGA package measuring 6.5 x 3.5 mm. A microcontroller (MCU) is a single-chip computer that integrates a processor core, memory, and programmable peripherals on one die, sitting within the system hierarchy of semiconductor -> integrated circuit -> embedded processor -> microcontroller. The ATmega16HVA belongs to Microchip's AVR battery-management family, a specialized branch of the AVR ATmega line that integrates dedicated battery-management peripherals alongside the standard MCU fabric. Key features include the Advanced RISC AVR architecture with 133 mostly single-cycle instructions, 16KB self-programmable FLASH, 256B EEPROM, 512B SRAM, and integrated battery-management functions that distinguish the HVA series from general-purpose ATmega parts of similar memory size. The 4 MHz maximum clock suits low-power embedded control where efficiency matters more than raw speed. Technically, the ATmega16HVA differs from its sibling ATmega8HVA only in memory size and interrupt vector capacity: the 16HVA doubles the FLASH to 16KB while retaining the same peripheral set, package, and pin configuration, allowing firmware headroom growth without PCB redesign. Typical applications include smart battery packs, battery chargers with fuel gauging, and portable embedded systems requiring supervised battery operation. Designers should note the 4 MHz ceiling when porting code from faster ATmega parts, and verify the 36-LGA footprint (6.5 x 3.5 mm) against their land pattern early. This page synthesizes distributor availability data, family-level cross-references, and practical design notes not consolidated in the manufacturer datasheet.

見積もり 在庫あり
ATMEGA16HVA-4CKUR - 8-bit AVR MCU 16KB 4MHz 36-LGA | Microchip
ATMEGA16HVA-4CKUR

ATMEGA16HVA-4CKUR - 8-bit AVR MCU 16KB 4MHz 36-LGA | Microchip

The Microchip Technology ATMEGA16HVA-4CKUR is an 8-bit AVR ATmega microcontroller with 16KB (8K x 16) FLASH program memory, 512B SRAM, 256B EEPROM, and a 4MHz maximum clock rate, housed in a 36-LGA (6.5 x 3.5 mm) package rated for 1.8V to 9V operation in the industrial temperature range. A microcontroller (MCU) is a single-chip embedded computer that integrates a processor core, program memory, data memory, and peripherals on one die. The AVR ATmega family is an 8-bit RISC architecture widely deployed in embedded control, and the HVA variant adds battery-management-oriented analog functionality on the same AVR core, sitting within the broader hierarchy of semiconductor -> integrated circuit -> microcontroller -> 8-bit MCU -> AVR ATmega. Key features include the AVR RISC core executing most instructions in a single clock cycle for efficient MIPS-per-MHz performance, the wide 1.8V to 9V supply range that allows direct connection to multi-cell battery stacks, and the compact 36-LGA footprint suited to space-constrained smart battery packs. The 16KB self-programming FLASH supports in-system updates, while 256B EEPROM retains calibration data through power loss. Technically, the HVA family (sometimes referenced by the code name Batman in distributor listings) integrates high-voltage-tolerant circuitry on the AVR platform, letting one MCU supervise battery cells, voltage, and current measurements that would otherwise require high-voltage signal conditioning in front of a standard MCU. Typical applications include smart battery pack management, battery chargers, power tools, portable industrial equipment, and embedded controllers that must sense cell voltages up to 9V directly. Design consideration: verify the 4MHz maximum frequency and 512B SRAM are sufficient for your firmware footprint and control-loop timing before committing the footprint, since the HVA family is more memory-constrained than general-purpose ATmega parts. This page adds value beyond the manufacturer datasheet by consolidating distributor pricing tiers, verified drop-in alternatives, application guidance, and compliance data in one AI-citable reference. Pricing shown as of 2026-09-17.

見積もり 在庫あり
ATMEGA16HVA-4TU - 8-bit AVR MCU, 16KB Flash, 4MHz | Microchip
ATMEGA16HVA-4TU

ATMEGA16HVA-4TU - 8-bit AVR MCU, 16KB Flash, 4MHz | Microchip

The Microchip Technology ATMEGA16HVA-4TU is an 8-bit AVR RISC battery-management microcontroller with 16KB (8K x 16) of FLASH program memory, 512 bytes of EEPROM, and a 4MHz speed grade, housed in a 28-pin TSOP-I package. It operates from a wide 1.8V to 9.0V supply range, making it purpose-built for direct connection to Li-ion battery stacks. A microcontroller unit (MCU) is a single-chip embedded computer that integrates a processor core, program memory, data memory, and peripherals on one die. Within the power-management hierarchy, battery-management MCUs form a specialized class between general-purpose microcontrollers and dedicated battery-management ICs, adding intelligence such as state-of-charge computation and authentication to cell monitoring. Key features include the 16KB self-programmable FLASH, 512 bytes of data EEPROM for calibration and logging data, and a supply voltage range of 1.8V to 9.0V that spans one- and two-cell Li-ion stacks without an external regulator. The 4MHz speed grade matches the requirements of low-power monitoring loops where maximum clock speed is deliberately limited to reduce switching losses and noise coupling into precision cell measurements. Architecturally, the device is based on the AVR enhanced RISC core, executing most instructions in a single clock cycle, which yields high code density and efficient interrupt handling for time-critical cell-voltage and current sampling routines. According to the FindIC product summary, the ATMEGA16HVA-4TU is an 8-bit battery-management microcontroller for 1-cell and 2-cell Li-ion applications that require high security and authentication, accurate monitoring, and high utilization of the cell energy. Typical applications include single-cell and two-cell Li-ion battery packs for portable equipment, smart battery authentication and fuel-gauging subsystems, and industrial monitoring nodes powered directly from battery stacks. The wide supply range and dedicated analog peripherals reduce external component count in space-constrained pack electronics. When designing with this part, respect the 4MHz speed-grade ceiling of this suffix and verify that your code size fits within 16KB FLASH with margin for firmware updates via self-programming. The 28-TSOP-I package is a fine-pitch surface-mount body, so specify adequate PCB land pattern tolerances. This page synthesizes distributor availability data, drop-in family alternatives, and battery-management-specific design guidance not consolidated in the manufacturer datasheet.

USD $2.42 在庫あり
ATMEGA16HVA-4TUR - 8-bit AVR Battery Management MCU | Microchip
ATMEGA16HVA-4TUR

ATMEGA16HVA-4TUR - 8-bit AVR Battery Management MCU | Microchip

The Microchip Technology ATMEGA16HVA-4TUR is an 8-bit AVR ATmega battery management microcontroller IC operating at up to 4 MHz with 16 KB (8K x 16) of in-system self-programmable Flash memory, 512 bytes of SRAM, and 256 bytes of EEPROM, housed in a 28-pin TSOP package and rated for a 1.8 V to 9 V supply range. A battery management MCU is a specialized class of 8-bit microcontroller that integrates precision analog monitoring peripherals with a general-purpose processor core, forming part of the broader power management and embedded control hierarchy. The ATMEGA16HVA belongs to this category, targeting 1-cell and 2-cell Li-ion battery packs that require security, authentication, accurate cell monitoring, and high utilization of stored cell energy. Key features include the high-performance, low-power AVR RISC architecture delivering up to 4 MIPS throughput at 4 MHz, an operating voltage window of 1.8 V to 9 V that directly supports one or two Li-ion cells, and 16 KB of self-programmable Flash enabling field firmware updates and secure boot implementations. The integrated battery management peripherals reduce external component count in pack-side electronics. Technically, the device combines the AVR core with dedicated cell-voltage measurement and safety functions tailored for Li-ion applications. The self-programmable Flash and EEPROM array support secure code storage and parameter logging, while the low-power design maximizes usable energy from the cells it protects. Typical applications include 1-cell and 2-cell Li-ion battery pack management for portable devices, smart battery authentication and security systems, and battery-powered industrial portable instruments where accurate monitoring extends runtime. Design consideration: the 4 MHz speed grade means time-critical loops should be kept simple, and the 1.8 V to 9 V input range must be respected across the full cell discharge curve, including end-of-discharge conditions. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet.

USD $2.64 在庫あり
ATMEGA16HVB-8X3R - 8-bit AVR MCU, 4-25V, 8MHz | Microchip
ATMEGA16HVB-8X3R

ATMEGA16HVB-8X3R - 8-bit AVR MCU, 4-25V, 8MHz | Microchip

The Microchip Technology ATMEGA16HVB-8X3R is an 8-bit AVR ATmega RISC microcontroller with 16KB (8K x 16) FLASH program memory, 1KB SRAM, and 512B EEPROM, running at up to 8MHz from a wide 4V to 25V supply, housed in a 44-pin TSSOP package supplied on tape and reel. An 8-bit microcontroller (MCU) is an integrated circuit that combines a processor core, program and data memory, and peripherals such as timers, ADCs, and communication interfaces on a single chip. Within the power-management hierarchy, the ATmega HVB family is a battery-management MCU class: an AVR core optimized for single-cell and multi-cell battery supervision in portable and industrial power systems. Key features include the wide 4V to 25V operating supply range, which allows direct connection to battery packs without an external regulator; the AVR RISC architecture executing most instructions in a single clock cycle for up to 8 MIPS at 8MHz; in-system programmable 16KB FLASH for field firmware updates; and integrated battery-management peripherals including ADC channels suited for cell voltage and current measurement. The device is fabricated in Microchip's AVR process optimized for low-power operation, with power-saving sleep modes and a battery-management interrupt structure that lets the core sleep between measurement events, extending battery runtime. The ATmega16HVB integrates dual power domains so the MCU logic can run from a regulated VCC while monitoring the raw battery rail. Typical applications include single- and multi-cell battery chargers, battery pack supervision and gauging, power tools, portable medical devices, and uninterruptible power supply front-end controllers, where wide-voltage operation and on-chip measurement peripherals reduce external component count. When designing with this device, verify the 4V to 25V supply envelope against the worst-case battery stack voltage, and confirm programming-tool support, since HVB-family devices use the AVR ISP/DebugWire interfaces. This page synthesizes distributor pricing, drop-in alternatives, application guidance, and practical design notes not found in the manufacturer datasheet.

USD $2.70 在庫あり
ATMEGA16L-8AI - 8MHz AVR MCU 16KB Flash TQFP-44 | Microchip
ATMEGA16L-8AI

ATMEGA16L-8AI - 8MHz AVR MCU 16KB Flash TQFP-44 | Microchip

The Microchip Technology (Atmel) ATMEGA16L-8AI is an 8-bit AVR ATmega microcontroller with 16KB (8K x 16) In-System Programmable Flash, 1KB SRAM, 512B EEPROM, an 8-channel 10-bit ADC, and an 8 MHz maximum clock in a 44-pin TQFP (10x10 mm) package for industrial temperature ranges. An AVR ATmega microcontroller is a member of the 8-bit microcontroller family built on the AVR enhanced RISC architecture, combining program Flash, SRAM, EEPROM, peripherals, and a CPU on a single IC. In the embedded-systems hierarchy, the ATmega16L sits between small ATtiny parts (fewer peripherals) and larger ATmega32/64/128 parts (more memory), making it a mid-range workhorse for general-purpose control tasks. Key differentiating features include 131 powerful instructions with mostly single-clock-cycle execution, 32 general-purpose working registers, up to 16 MIPS throughput at 16 MHz (8 MHz rated for this L-grade part), and a JTAG interface for on-chip debugging. The 10-bit ADC supports 8 single-ended channels and 7 differential channels in the TQFP package, including 2 differential channels with programmable gain at 1x, 10x, or 200x. Architecturally, the AVR core uses a Harvard structure with separate program and data buses, allowing one instruction to execute while the next is fetched. The self-programming Flash enables field firmware updates via bootloaders, while the 16-kbyte self-programming program memory and in-system programmability simplify production and maintenance. Typical applications include industrial control and automation nodes, consumer appliance controllers, sensor-interface boards using the 8-channel ADC, and hobby/embedded training platforms where JTAG debug is valuable. Design consideration: as an L-grade part, it runs at 8 MHz maximum; if your design needs 16 MHz, select the ATMEGA16-16AI instead, keeping the same 44-TQFP footprint. This page synthesizes distributor listings, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

見積もり 在庫あり
ATMEGA16L-8AJ - 8MHz 16KB Flash AVR MCU 44-TQFP | Microchip
ATMEGA16L-8AJ

ATMEGA16L-8AJ - 8MHz 16KB Flash AVR MCU 44-TQFP | Microchip

The Microchip Technology ATMEGA16L-8AJ is a high-performance, low-power 8-bit AVR RISC microcontroller with 16KB (8K x 16) of self-programming Flash program memory, 1KB SRAM, and 512B EEPROM, running at up to 8MHz in a 44-pin TQFP (10x10 mm) surface-mount package. An 8-bit microcontroller is a single-chip computer that integrates a CPU core, program memory, data memory, and peripherals onto one die. Within the power-management hierarchy of embedded systems, the AVR ATmega family sits in the general-purpose MCU class, part of the broader microcontroller unit (MCU) -> integrated circuit -> semiconductor taxonomy. The AVR architecture uses an advanced RISC core with 131 powerful instructions, most of which execute in a single clock cycle, delivering up to 16 MIPS throughput at 16MHz and up to 8 MIPS at the 8MHz rating of this L-variant. Key features include an 8-channel, 10-bit analog-to-digital converter (ADC), a JTAG interface for on-chip debugging, two 8-bit and one 16-bit timers/counters with PWM outputs, an 8-bit synchronous and asynchronous USART, Master/Slave SPI, and a Two-Wire Interface (TWI / I2C). The ATMEGA16L-8AJ is the low-voltage L-grade part, specified for operation from approximately 2.7V to 5.5V at up to 8MHz over the industrial temperature range, making it suitable for 3.3V battery-powered designs as well as 5V legacy rails. Technically, the device combines a Harvard-architecture RISC core with fast-register access, in-system self-programmable Flash, and internal RC oscillator options. Brown-out reset, watchdog timer, and an on-chip debug channel via JTAG provide robust field operation and development support without external debug silicon. Typical applications include industrial control panels, sensor nodes, embedded metering, HVAC controllers, motor control peripherals, and educational/hobby platforms where proven 8-bit performance is required. Designers should note that Flash endurance and boot-loader self-programming enable field firmware updates; reserve a boot sector and include a brown-out detector configuration appropriate to the supply rail. This page synthesizes distributor pricing, drop-in alternatives, pinout data, and practical design notes not found on the manufacturer datasheet alone.

USD $1.82 在庫あり
ATMEGA16L-8MC - 8MHz AVR MCU, 16KB Flash, 44-VQFN | Microchip
ATMEGA16L-8MC

ATMEGA16L-8MC - 8MHz AVR MCU, 16KB Flash, 44-VQFN | Microchip

The Microchip Technology ATMEGA16L-8MC is a low-power 8-bit AVR RISC microcontroller with 16KB self-programming Flash, 1KB SRAM, 512B EEPROM, an 8-channel 10-bit ADC, and a JTAG interface for on-chip debugging, rated for up to 8 MHz operation from a 2.7V to 5.5V supply in a 44-pin VQFN (7x7 mm) surface-mount package with exposed pad. An AVR ATmega microcontroller is an 8-bit MCU built on the AVR enhanced RISC architecture, in which 131 powerful instructions - most executing in a single clock cycle - feed 32 general purpose working registers. Within the component hierarchy, it sits as a microcontroller under the broader families of embedded processor, integrated circuit, and semiconductor, and competes with 8-bit families such as Microchip PIC16 and ST ST8 in cost-sensitive embedded control designs. Key features include 16KB (8K x 16) In-System Programmable Flash with self-programming capability for bootloaders, a 10-bit successive-approximation ADC with 8 multiplexed channels, JTAG on-chip-debug, and integrated Brown-out Detection, Power-On Reset, PWM outputs, and a Watchdog Timer (WDT). The 'L' grade operates at up to 8 MHz across 2.7V to 5.5V, giving design headroom on both 3.3V and 5V rails. Architecturally, the single-cycle ALU and Harvard memory structure deliver up to 8 MIPS at 8 MHz, making throughput predictable and deterministic - valuable for real-time control loops. The self-programming Flash allows firmware update in the field without an external programmer. Typical applications include industrial sensor nodes using the 8-channel ADC, motor control and lighting systems using PWM, and battery-powered instrumentation where the low-voltage 'L' grade and low-power AVR core extend operating life. Design consideration: at 8 MHz the maximum rating is fixed; the non-L ATMEGA16-16 parts run 16 MHz but require a higher minimum supply voltage, so decouple the 3.3V/5V rail decision with the clock frequency. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $2.21 在庫あり
ATMEGA16L-8MJ - 8-bit AVR MCU, 16KB Flash 8MHz | Microchip
ATMEGA16L-8MJ

ATMEGA16L-8MJ - 8-bit AVR MCU, 16KB Flash 8MHz | Microchip

The Microchip Technology ATMEGA16L-8MJ is an 8-bit AVR ATmega microcontroller IC with 16KB (8K x 16) of In-System Programmable Flash memory, 1KB of SRAM, 512 bytes of EEPROM, and up to 8 MIPS throughput at 8MHz, housed in a 44-pad VQFN (7x7 mm) exposed-pad surface-mount package. An AVR ATmega microcontroller is an advanced RISC architecture MCU within the broader voltage-regulator-to-processor hierarchy of embedded control: it combines CPU, program Flash, data SRAM, EEPROM, and peripherals on a single chip, serving as the core of countless embedded systems. The ATMEGA16L-8MJ executes 131 powerful instructions, most in a single clock cycle, with 32 general-purpose working registers. Key features include the low-voltage L-suffix rating, operating from 2.7V to 5.5V at up to 8MHz, an 8-channel 10-bit ADC, a JTAG interface for on-chip debug (JTAG OCD emulation and boundary scan), and self-programming Flash for field firmware updates. Peripheral set includes two 8-bit timers, one 16-bit timer, four PWM channels, SPI, TWI (I2C-compatible), and a programmable serial USART. Technically, the device uses the AVR enhanced RISC Harvard architecture with separate instruction and data buses, achieving near-one-MIPS-per-MHz efficiency while remaining low-power. Brown-out detection, an internal RC oscillator, and six sleep modes (including Power-down and Power-save with RTC) support battery-operated designs. Typical applications include industrial automation control, sensor data acquisition using the 8-channel 10-bit ADC, battery-powered instrumentation, HVAC and motor control panels, and consumer appliances. The 44-VQFN 7x7 mm footprint saves board area versus the 44-TQFP variant while retaining full I/O access. Design considerations: verify oscillator selection against the 8MHz L-grade speed limit and enable Brown-Out Detection for supply-dip immunity. This page synthesizes distributor inventory, drop-in alternatives, pinout data, and practical design notes not found in the manufacturer datasheet.

USD $1.86 在庫あり
ATMEGA16L-8MU - 8-bit AVR MCU 16KB Flash 8MHz QFN-44 | Microchip
ATMEGA16L-8MU

ATMEGA16L-8MU - 8-bit AVR MCU 16KB Flash 8MHz QFN-44 | Microchip

The Microchip Technology ATMEGA16L-8MU is an 8-bit AVR RISC microcontroller with 16KB (8K x 16) of In-System Programmable Flash memory, 512 bytes of EEPROM, and an 8MHz maximum clock speed, housed in a 44-pin VQFN (7x7 mm) package with exposed pad. It operates from a 2.7V to 5.5V supply, making the L-grade device well suited to both 3.3V and 5V systems. An AVR microcontroller is a family of 8-bit reduced-instruction-set (RISC) MCUs that execute most instructions in a single clock cycle. Within the power-management and embedded-control hierarchy, an MCU like this combines a processor core, program Flash, SRAM, EEPROM, and peripherals such as UART, SPI, TWI (I2C), timers, and a 10-bit ADC into a single chip, replacing multi-chip glue logic in embedded designs. Key differentiating features include the advanced RISC architecture with 133 powerful instructions, 32 general-purpose working registers, and full static operation. The 16KB self-programmable Flash supports In-System Programming (ISP), enabling field firmware updates without removing the device from the board. The 512B EEPROM retains calibration data and settings through power cycles. The ATmega16L core pairs a Harvard-architecture AVR core with rich peripherals: two 8-bit and one 16-bit timer with PWM, an 8-channel 10-bit ADC, byte-oriented TWI, SPI serial port, and a programmable serial USART. The exposed-pad QFN package improves ground and thermal performance over the TQFP alternative while shrinking board area to a 7x7 mm footprint for space-constrained products. Typical applications include industrial automation and sensor nodes, battery-powered portable instrumentation (where the low-voltage 2.7V operation extends battery life), home appliances, lighting and motor control, and embedded education or prototyping platforms built on the well-documented ATmega ecosystem. Design consideration: the L suffix caps speed at 8MHz; if your firmware requires 16MHz operation, select the standard-grade ATmega16A/ATmega16 part instead, since the L-grade speed limit cannot be exceeded regardless of supply voltage. This page synthesizes distributor pricing from DigiKey, Mouser, LCSC, and Octopart, drop-in package-compatible alternatives, and practical selection guidance not consolidated in the manufacturer datasheet.

USD $6.13 在庫あり
ATMEGA16L-8PC - 8-bit AVR MCU 16KB Flash 8MHz 40-PDIP | Microchip
ATMEGA16L-8PC

ATMEGA16L-8PC - 8-bit AVR MCU 16KB Flash 8MHz 40-PDIP | Microchip

The Microchip Technology ATMEGA16L-8PC is an 8-bit AVR enhanced RISC microcontroller with 16KB of In-System Programmable Flash, 1KB of SRAM, 512 bytes of EEPROM, and a maximum clock frequency of 8MHz, housed in a 40-pin PDIP (0.600 inch, 15.24mm) package. The L-variant supports an operating voltage range of 2.7V to 5.5V, making it suitable for both 3.3V and 5V systems. An AVR microcontroller is a family of 8-bit RISC MCUs originally developed by Atmel and now manufactured by Microchip Technology. AVR cores execute most instructions in a single clock cycle, achieving up to 8 MIPS at 8MHz, and sit within the broader MCU hierarchy of embedded processors used for real-time embedded control. Key features include 131 powerful instructions with single-cycle execution, 32 general-purpose 8-bit registers, an 8-channel 10-bit ADC, four PWM channels, a JTAG interface for on-chip debugging and boundary scan, plus USART, SPI and TWI (I2C) serial interfaces. Program memory endures at least 10,000 Flash write/erase cycles, with optional boot-code section for in-system programming. Architecturally, the Harvard design separates program and data buses, allowing simultaneous access to instruction and data memory. The low-power L variant targets battery-powered designs, with idle and power-down sleep modes reducing consumption during inactivity. Typical applications include industrial control panels, LED and keypad-driven human-machine interfaces, motor and relay control boards, hobbyist and educational platforms, and 3.3V battery-powered instruments where the wide 2.7V to 5.5V range and through-hole 40-PDIP package simplify prototyping and rework. For design, remember the PDIP version is limited to 8MHz and 16MHz-grade timing only at 5V on the non-L variants; keep decoupling capacitors close to VCC and AVCC, and tie RESET properly for ISP programming. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $2.05 在庫あり
ATMEGA16L-8PI - 8-bit AVR MCU 16KB 8MHz DIP-40 | Microchip
ATMEGA16L-8PI

ATMEGA16L-8PI - 8-bit AVR MCU 16KB 8MHz DIP-40 | Microchip

The Microchip ATMEGA16L-8PI is a low-power 8-bit AVR RISC microcontroller with 16KB self-programming Flash, 1KB SRAM, 512B EEPROM, an 8-channel 10-bit ADC, and a JTAG interface for on-chip debugging, delivering up to 16 MIPS throughput at 16 MHz and rated 8 MHz in the L speed grade, packaged in a 40-pin PDIP for industrial temperature ranges. A microcontroller (MCU) is a single-chip computer that integrates a processor core, non-volatile program memory, data memory, and peripherals such as timers, ADCs, and communication interfaces. The AVR ATmega family sits in the 8-bit MCU hierarchy alongside 8051 and PIC architectures, and is widely used in embedded control, industrial automation, and education. Key features include 131 powerful RISC instructions, most executing in a single clock cycle, 32 general-purpose working registers, self-programming Flash for in-system bootloading, and an on-chip JTAG debug boundary-scan interface. The 8-channel 10-bit ADC with internal bandgap reference enables direct analog sensor connection, while integrated UART, SPI, and TWI (I2C-compatible) serial ports reduce external interface ICs. Technically, the ATmega16L uses the AVR enhanced RISC Harvard architecture with separate program and data buses, achieving high code efficiency. The L suffix denotes the low-voltage speed grade (2.7V to 5.5V operation at up to 8 MHz), the P suffix a 40-pin PDIP package, and I an industrial temperature rating of -40C to +85C. Typical applications include industrial control panels, sensor data loggers, educational breadboard projects, and legacy embedded system maintenance, where through-hole mounting and DIP-40 breadboard compatibility are valued. Design consideration: at 5V and 8 MHz the device operates near its rated maximum; keep Brown-out Detection enabled to prevent EEPROM corruption during undervoltage events, and reserve PDIP-40 breadboard projects for prototyping since through-hole packages carry higher lead inductance. This page synthesizes distributor pricing, drop-in alternatives, pinout data, and practical design notes not found in the manufacturer datasheet.

USD $2.98 在庫あり
ATMEGA16L-8PU - 8MHz AVR MCU 16KB Flash DIP-40 | Microchip
ATMEGA16L-8PU

ATMEGA16L-8PU - 8MHz AVR MCU 16KB Flash DIP-40 | Microchip

The Microchip Technology ATMEGA16L-8PU is an 8-bit AVR RISC microcontroller with 16KB of In-System Programmable (ISP) Flash memory, 1KB SRAM, 512B EEPROM, and an 8MHz maximum clock speed, housed in a 40-pin PDIP package with an operating voltage range of 2.7V to 5.5V. An 8-bit microcontroller (MCU) is a self-contained computing device that integrates a processor core, program memory, data memory, and peripherals on a single chip. The ATmega family belongs to the AVR architecture, which executes most instructions in a single clock cycle, and it sits within the broader hierarchy of microcontrollers -> embedded processors -> semiconductors. AVR MCUs are widely used in education, industrial control, and hobbyist embedded design because of their simple architecture and rich tool support. Key features include the Advanced RISC architecture with 133 powerful instructions, 32 x 8-bit general-purpose working registers, an 8-channel 10-bit ADC, and an on-chip JTAG interface for boundary-scan and on-chip debugging. The L suffix denotes a low-voltage 'L' grade rated for 2.7V to 5.5V operation at up to 8MHz, which makes this part ideal for battery-powered designs where a standard 16MHz 4.5V-5.5V part would be unsuitable. The ATMEGA16L-8PU integrates a USART serial port, SPI, and TWI (I2C-compatible) interfaces, three hardware timers with PWM outputs, and an internal RC oscillator option that reduces external component count. The DIP-40 package is through-hole mountable, breadboard-friendly, and easily field-replaceable, which distinguishes it from surface-mount TQFP and QFN siblings such as the ATMEGA16L-8AU or ATMEGA16L-8MC. Typical applications include industrial control panels, sensor data loggers, motor control, educational lab boards, and legacy-equipment maintenance where a 5V through-hole MCU is required. Designers should note that Flash endurance is rated for thousands of erase/write cycles, so frequent data logging should use the dedicated EEPROM rather than program Flash. This page synthesizes verified distributor data, pin-compatible alternatives, and practical design notes not found in the manufacturer datasheet.

USD $3.55 在庫あり