マイクロコントローラ

製品 (20,000+)

MC9S08AW60CFUE - 40MHz 60KB Flash 8-Bit MCU | NXP
MC9S08AW60CFUE

MC9S08AW60CFUE - 40MHz 60KB Flash 8-Bit MCU | NXP

The NXP Semiconductors MC9S08AW60CFUE is an 8-bit HCS08 microcontroller with a 40 MHz CPU, 60 KB of Flash program memory, 4 KB of RAM, and a 64-pin QFP package measuring 14 mm by 14 mm. It is designed for embedded control applications that require a compact, low-cost microcontroller with integrated communication and timing peripherals. The verified product information identifies the device as part of the MC9S08AW family, using the enhanced HCS08 core and supporting industrial and automotive applications. A microcontroller is a compact embedded-computing device that integrates a processor core, nonvolatile program memory, working memory, input/output ports, and peripherals into one package. The MC9S08AW60CFUE belongs to the HCS08 8-bit MCU hierarchy, where the CPU executes firmware from Flash while RAM supports variables, stack operations, and intermediate data. Its 40 MHz clock provides faster instruction execution than lower-frequency 8-bit designs, making it suitable for real-time control, communication, and mixed signal systems. Key verified features include 60 KB of Flash memory, 4 KB of RAM, 38 I/O ports according to one product specification source, and connectivity including I2C, SCI, and SPI. The device also includes listed peripherals such as low-voltage detection, power-on reset, pulse-width modulation, and a watchdog timer. The 64-QFP package provides a higher pin count than small-outline packages and supports external peripheral connections, debug access, and system integration. The MC9S08AW60CFUE uses the HCS08 instruction set with an added BGND instruction, and the verified datasheet description identifies a minimum instruction cycle time of 50 ns under the stated 2.7 V and 20 MHz bus condition. Because the device is an 8-bit MCU, its architecture is generally intended for control logic, sensor interfaces, actuator control, communications, and embedded products rather than high-end application processing. Typical applications include industrial control panels, automotive body and accessory electronics, instrumentation, motor or relay control, sensor acquisition, serial communication gateways, and compact consumer devices. Designers should select the correct package variant, power range, peripheral configuration, and temperature grade for the target assembly. For PCB design, preserve the manufacturer-recommended decoupling and exposed programming or debug connections, and verify signal levels against the selected HCS08AW variant. When replacing another MCU, confirm pin assignment, clock requirements, Flash/RAM sizing, peripheral mapping, and software toolchain compatibility rather than relying only on the family name. This page consolidates verified manufacturer and distributor information, package details, lifecycle status, pricing context, and engineering selection guidance. It is intended to help engineers identify the correct MCU and plan a hardware and firmware migration without assuming that a similarly named part is automatically drop-in compatible.

見積もり お問い合わせ
MC9S08AW60CPUE - 8-bit MCU 60KB Flash 40MHz | NXP
MC9S08AW60CPUE

MC9S08AW60CPUE - 8-bit MCU 60KB Flash 40MHz | NXP

The NXP MC9S08AW60CPUE is an 8-bit HCS08 microcontroller with 60 KB flash memory, 40 MHz CPU clock (20 MHz internal bus frequency), and 4 KB RAM, housed in a 64-pin LQFP (10 x 10 mm, 0.5 mm pitch, MO-220VKKD-2) surface-mount package. A microcontroller unit (MCU) is a single integrated circuit that combines a processor core, program memory, data memory, and peripheral interfaces on one die, serving as the lowest level of the embedded computing hierarchy (MCU -> embedded processor -> semiconductor). The HCS08 family from NXP (originally Freescale Semiconductor) is a CISC-architecture 8-bit MCU line built around an enhanced S08 core that executes the HC08 instruction set with the added BGND instruction. Key features of the MC9S08AW60CPUE include 60 KB of on-chip flash program memory with 4 KB of RAM, a single-wire background debug mode (BDM) interface for low-cost in-circuit debugging, a 16-bit timer module, a 10-bit ADC, and serial communication interfaces including SCI and SPI. The device offers 38 general-purpose I/O and multiple power-saving modes, which are essential for battery-operated and energy-sensitive designs. The enhanced HCS08 core operates from a 2.7 V to 5.5 V single supply, supporting direct connection to automotive and industrial 5 V rails as well as 3.3 V logic systems. The wide supply range eliminates the need for an external regulator in many cost-sensitive applications, reducing bill-of-materials cost. Flash memory is programmed in-system through the background debug interface, supporting field firmware updates. Typical applications include automotive body electronics, industrial control systems, home appliances, motor control, and cost-sensitive consumer devices. The industrial and automotive qualification breadth of the S08AW family makes it a common choice for dashboard controllers, sensor hubs, and lighting control modules. When designing with this MCU, plan the clock configuration carefully: the 40 MHz CPU clock is derived from an internal bus running at 20 MHz, so timing budgets and peripheral prescalers must be calculated at bus speed. Reserve the single-wire debug pin routing on the PCB for production programming access. This page synthesizes distributor pricing data, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing engineers with a complete selection and sourcing resource.

見積もり お問い合わせ
MC9S08AW60MFDE - 8-bit HCS08 MCU 60KB Flash 40MHz | NXP
MC9S08AW60MFDE

MC9S08AW60MFDE - 8-bit HCS08 MCU 60KB Flash 40MHz | NXP

The NXP MC9S08AW60MFDE is an 8-bit HCS08-family microcontroller unit (MCU) integrating 60 KB of on-chip Flash, 60 KB of ROM-free RAM region (2 KB), and a 40 MHz enhanced HCS08 central processing unit with a 20 MHz internal bus frequency, packaged in a 48-pin QFN-EP (7 mm x 7 mm) with exposed thermal pad. It operates from 2.7 V to 5.5 V supply and provides 38 general-purpose I/O ports with background-debug-mode (BDM) single-wire interface support. An MCU (microcontroller unit) is a single-chip computer that combines a CPU core, non-volatile program memory (Flash), volatile working memory (RAM), and a rich set of on-chip peripherals such as timers, ADC, communication controllers, and GPIO. Within the semiconductor taxonomy the MC9S08AW60MFDE belongs to the HCS08 8-bit microcontroller family, sitting under the broader category of embedded microcontrollers, which in turn belong to microprocessors and digital logic ICs. The HCS08 family is an enhanced evolution of the legacy HC08 core, adding the BGND instruction for background debug, improved instruction throughput, and lower active/idle current draws. Key features include 60 KB of embedded Flash with in-application programmability, an internal clock generator with options for an external crystal or resonator, multiple 16-bit timer/PWM channels, up to 16 channels of 10-bit ADC, SCI (UART), SPI, and I2C peripherals, plus a real-time counter and a watchdog timer for safety-critical control loops. The device supports both industrial and automotive-grade application profiles per its family datasheet. The HCS08 core uses a von Neumann architecture with a 16-bit stack pointer, 16-bit index register (H:X), and a compact CISC instruction set that is largely source-compatible with HC08 assembly while delivering roughly 50% better performance per clock cycle. The integrated voltage regulator and brown-out reset block simplify 3.3 V and 5 V single-rail designs, while the BDM single-wire debug interface eliminates the need for an expensive in-circuit emulator during prototype development. Typical applications include industrial sensor conditioning, white-goods motor control, automotive body controllers, HVAC blower/fan controllers, low-end graphical display panels, and small-form-factor consumer appliances. The wide 2.7 V to 5.5 V input range makes it compatible with both 3.3 V and 5 V sensor and actuator systems. When designing with this part, pay close attention to decoupling: place a 100 nF X7R bypass capacitor within 1-2 mm of each power pin and a bulk 4.7 uF to 10 uF tantalum or ceramic capacitor near the package exposed pad. Also ensure the BDM pin is routed to a header or test pad for in-system debug, and verify that the IRQ pin has a proper pull-up if unused. This page synthesizes distributor pricing, drop-in alternatives from the same AW60/AW48/AW32/AW16 family, and practical design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ
MC9S08AW60MPUE557 - 8-bit HCS08 MCU 60KB Flash 40MHz LQFP-64
MC9S08AW60MPUE557

MC9S08AW60MPUE557 - 8-bit HCS08 MCU 60KB Flash 40MHz LQFP-64

The NXP MC9S08AW60MPUE557 is an 8-bit HCS08-family microcontroller (MCU) with a 40 MHz enhanced S08 core, 60 KB of on-chip Flash program memory, and 64 KB Flash program storage. It is housed in a 64-pin LQFP (10x10 mm) surface-mount package, operates from a 2.7 V to 5.5 V supply, and integrates ADC, PWM, timers, and serial communication peripherals for embedded control applications. The MC9S08AW60 family supports both Industrial and Automotive industry segments per NXP's product family description. Background knowledge: An 8-bit microcontroller (MCU) is a single-chip computer that combines a CPU, RAM, Flash program memory, and peripherals on one silicon die. The HCS08 core is NXP's enhanced 8-bit architecture succeeding the legacy HC08, adding the BGND instruction and a single-wire background debug mode interface that simplifies in-circuit programming and debugging. The MC9S08AW60 belongs to the AW sub-family of low-cost, high-performance HCS08 microcontrollers designed for cost-sensitive motor-control, appliance, and industrial-control applications, fitting the broader microcontroller -> embedded controller -> semiconductor taxonomy. Key features include a 40 MHz CPU clock with a 20 MHz internal bus frequency, 60 KB (60K x 8) Flash, 4 KB RAM, 38 to 64 programmable I/O lines (package-dependent), and integrated peripherals including ADC, PWM, SCI, SPI, and I2C. The device supports a -40C to +85C industrial operating temperature range and includes on-chip voltage regulator, low-voltage detection, and watchdog timer for system reliability. The single-wire background debug mode (BDM) interface enables in-circuit flash programming and real-time debug without requiring additional program memory or pin resources. The HCS08 core uses a von Neumann architecture with a 16-bit stack pointer, 16-bit index registers (H:X), and an enhanced instruction set that improves code density over the legacy HC08. The on-chip voltage regulator generates the internal logic supply from the external 2.7 V to 5.5 V input, simplifying power design. Flash memory supports in-application reprogramming via the BDM interface, enabling firmware updates in the field. Typical applications include industrial control systems, automotive body electronics, appliance motor control, HVAC controllers, and sensor-interface modules. The wide peripheral set also fits building automation, security panels, and low-cost consumer devices. Designers should evaluate supply decoupling (0.1 uF plus bulk 1 uF to 10 uF ceramic), BDM interface pin protection, and PCB layout for the ADC analog input traces. The 64-LQFP package allows easy hand-soldering and prototyping, while the 2.7 V minimum supply enables direct Li-ion or 3.3 V system-rail operation. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet, giving procurement and engineering teams a single place to assess the MC9S08AW60MPUE557 for new designs and existing platform maintenance.

見積もり お問い合わせ
MC9S08DN16ACLC - 40MHz 16KB 8-Bit MCU | NXP | 32-LQFP
MC9S08DN16ACLC

MC9S08DN16ACLC - 40MHz 16KB 8-Bit MCU | NXP | 32-LQFP

The NXP Semiconductors MC9S08DN16ACLC is an 8-bit S08DN microcontroller with a 40 MHz processor, 16 KB of embedded Flash memory, 512 bytes of RAM, and a 32-pin LQFP package. It combines an 8-bit CPU architecture with LIN connectivity and I2C/SPI interfaces for compact embedded-control designs. A microcontroller integrates a processor core, program memory, data memory, peripherals, interrupt control, and debug or emulation resources on one semiconductor device. The S08 family targets automotive and industrial embedded systems where deterministic control, low pin count, and communication peripherals are valuable. MC9S08DN16ACLC belongs to the broader semiconductor hierarchy: MCU, embedded processor, 8-bit microcontroller, and S08DN device. The principal verified features are a 40 MHz maximum clock, 20 MHz bus operation, 16 KB Flash organized as 16K x 8, 512 B RAM, an S08 core, an 8-bit data bus, and a 32-LQFP package measuring 7 x 7 mm. The integrated communication set includes LIN, I2C, and SPI. A cited HCS08-family source also identifies support for as many as 32 interrupt or reset sources, although device-specific applicability must be confirmed against the exact manufacturer documentation. Technically, the MCU combines a relatively high-frequency 8-bit core with modest on-chip memory, making it appropriate for compact control logic rather than high-memory graphical workloads. Its bus speed is half the stated 40 MHz CPU frequency, a useful constraint when timing peripherals or external bus transactions. The 8-bit data architecture simplifies peripheral integration while limiting throughput compared with modern 16-bit or 32-bit MCUs. Typical uses include LIN-connected automotive modules, industrial sensors, compact motor or actuator controllers, communication bridges, and embedded control panels. I2C suits low-speed sensors and EEPROMs, SPI supports faster peripherals, and LIN provides a vehicle-network-oriented serial interface when its electrical transceiver is implemented externally. Designers should preserve the 20 MHz bus constraint, confirm every peripheral and pin against the exact datasheet, and design the LIN physical layer separately when the MCU is used in a vehicle network. Current distributor information lists the device in 32-LQFP, but exposed operating limits, pin names, timing values, and package thermal details require exact manufacturer data. This page consolidates verified NXP and distributor information with selection guidance, application fit, interface considerations, and drop-in-replacement validation. It distinguishes confirmed values from parameters that still require datasheet confirmation, helping engineers avoid treating search snippets as a substitute for the exact MC9S08DN16ACLC datasheet.

見積もり お問い合わせ
MC9S08DN16AMLC - 8-Bit 40MHz 16KB MCU | NXP
MC9S08DN16AMLC

MC9S08DN16AMLC - 8-Bit 40MHz 16KB MCU | NXP

The NXP MC9S08DN16AMLC is an 8-bit HCS08 microcontroller operating at up to 40 MHz, with 16 KB of programmable flash memory and a 32-LQFP 7 x 7 mm package. Its 20 MHz bus supports an S08 instruction set enhanced with the BGND instruction, while the integrated connectivity includes I2C, LINbus, SCI, and SPI. A microcontroller is a programmable integrated circuit that combines a CPU, memory, and peripherals on one semiconductor die. The HCS08 family belongs to the broader 8-bit MCU hierarchy and is intended for embedded control, sensing, communications, and actuator-control systems. Compared with a discrete logic controller, the MC9S08DN16AMLC consolidates processing, flash, RAM, analog conversion, timing, and serial communications into a compact surface-mount device. The verified feature set includes a 40 MHz HCS08 CPU, support for up to 32 interrupt and reset sources, a 16-channel 12-bit ADC, PWM, a watchdog timer, low-voltage detection, and power-on reset. Its 25 I/O pins provide interface capacity for sensors, displays, actuators, and industrial-control peripherals. The 512 x 8 EEPROM and RAM size should be verified against the manufacturer datasheet before final design release because the supplied search data does not state the RAM capacity directly. Typical uses include low-cost industrial controllers, building and appliance controls, sensor-conditioning systems, and compact communications modules. The 40 MHz CPU provides useful headroom for protocol handling and control loops, while the serial peripherals reduce the need for external interface devices. The LQFP package also exposes more pins than a small-outline package and can simplify board-level routing. When replacing this obsolete part, engineers should verify the complete pinout, memory map, electrical limits, peripheral allocation, and software compatibility against the manufacturer documentation. A distributor listing can confirm availability, but it does not by itself establish functional drop-in equivalence. This page combines the supplied distributor, manufacturer-related, and datasheet-search information with engineering-oriented sourcing and design guidance. It does not infer undocumented specifications or treat general parametric search results as proof of drop-in replacement.

見積もり お問い合わせ
MC9S08DN16AMLF - 16KB 40MHz 8-Bit MCU | NXP | LQFP-48
MC9S08DN16AMLF

MC9S08DN16AMLF - 16KB 40MHz 8-Bit MCU | NXP | LQFP-48

The NXP Semiconductors MC9S08DN16AMLF is an 8-bit S08DN microcontroller with a 40 MHz HCS08 core, 20 MHz bus, 16 KB Flash, 1 KB RAM, 39 I/O, and a 48-LQFP package. The verified product information also identifies an external oscillator, tray packaging, 16-channel 12-bit ADC support, and up to 32 interrupt or reset sources. It is listed as NRND by NXP, so engineering teams should confirm lifecycle, sourcing, and availability before new production commitments. What is an 8-bit microcontroller? An MCU is a compact embedded-control IC containing a CPU core, program and data memory, I/O ports, and peripherals such as timers, serial interfaces, and analog converters. In the broader hierarchy, this device belongs to the embedded microcontroller, 8-bit MCU, HCS08 family, and S08DN product line. Its combination of modest memory, fast CPU timing, and numerous integrated peripherals makes it suitable for control-oriented embedded systems rather than high-end application processing. The key feature set includes 16 KB of Flash for firmware, 1 KB of RAM, a 40 MHz HCS08 CPU, 20 MHz bus operation, the HC08 instruction set with the BGND instruction, and a 39-pin I/O count. The verified listings identify a 16-channel, 12-bit-resolution ADC with a stated 2.5-second conversion-time description, although the exact characterization conditions are not provided in the supplied data and should be checked in the manufacturer datasheet. MC9S08DN16AMLF is associated with automotive and industrial embedded-control use cases, including LIN-oriented interface designs and motor or sensor control systems. Its LQFP-48 package exposes the MCU resources through a relatively dense surface-mount footprint, making pin assignment, decoupling, oscillator routing, and PCB thermal design important implementation concerns. The listed package size is 7 mm by 7 mm according to the DigiKey result. Typical applications include automotive body and accessory modules, LIN-connected peripherals, sensor acquisition systems, actuator controllers, industrial control panels, and compact embedded products requiring an 8-bit MCU. For these applications, validate peripheral availability, electrical limits, memory requirements, and toolchain support against the exact orderable device before layout release. The main design consideration is lifecycle management. Because the NXP product page marks the part NRND, purchasing decisions should distinguish ongoing maintenance demand from new-design adoption. Confirm approved sources, last-time-buy implications where applicable, package dimensions, pin multiplexing, and any firmware or emulator compatibility requirements. This page synthesizes verified distributor and manufacturer information, lifecycle status, package details, technical parameters, application guidance, and sourcing considerations for engineers evaluating the MC9S08DN16AMLF.

見積もり お問い合わせ
MC9S08DN16CLC - 8-bit S08 MCU, 16KB Flash, 40MHz | NXP
MC9S08DN16CLC

MC9S08DN16CLC - 8-bit S08 MCU, 16KB Flash, 40MHz | NXP

The NXP MC9S08DN16CLC is an 8-bit S08 family microcontroller featuring a 40 MHz HCS08 core, 16 KB of on-chip Flash and 1 KB of RAM, packaged in a 32-pin LQFP (7x7 mm). The device targets cost-sensitive industrial control nodes requiring deterministic 8-bit performance, on-chip CAN-style connectivity peripherals, and a small footprint for compact PCBs. An 8-bit microcontroller (MCU) is a self-contained compute element that integrates a CPU, non-volatile program memory (Flash), volatile data memory (RAM), and peripherals such as timers, ADCs, communication interfaces, and GPIOs onto a single silicon die. Within the broader semiconductor taxonomy, an MCU belongs to the embedded microcontroller hierarchy: MCU -> microcontroller -> embedded processor -> semiconductor device. The 8-bit class is chosen when determinism, low interrupt latency, code simplicity, and BOM cost outweigh the throughput advantages of 16/32-bit cores. Key features include a 40 MHz maximum internal bus frequency delivering 20 MHz instruction throughput, an integrated ADC, multiple timers (TPM), SCI and SPI serial interfaces, and a low-power STOP/WAIT operating mode. The 16 KB Flash supports in-application reprogramming via background debug mode (BDM), enabling firmware updates in the field without removing the device. The S08DN16 silicon pairs an HCS08 core with NXP's peripheral set tuned for industrial networking nodes. The 32-LQFP package exposes up to 27 GPIO pins, an external interrupt controller, and a robust power-on reset (POR) and COP watchdog architecture, suitable for unattended field installations. Typical applications include industrial control modules, low-end motor control signal conditioning, sensor interface boards, building automation nodes, and low-cost consumer appliances. Designers also use it in safety accessory chains and replacement modules for legacy Freescale/NXP S08 designs. Design with adequate supply decoupling: a 100 nF ceramic placed within 5 mm of each VDD/VSS pair and a 4.7 uF bulk capacitor stabilize the internal regulator. The BKGD pin requires proper pull-up and a series resistor for in-circuit debugging. This page synthesizes distributor pricing, parametric cross-reference alternatives, and practical design notes not aggregated on the manufacturer datasheet alone.

見積もり お問い合わせ
MC9S08DN16CLF - 8-Bit 40MHz S08 MCU, 16KB Flash, 48-LQFP | NXP
MC9S08DN16CLF

MC9S08DN16CLF - 8-Bit 40MHz S08 MCU, 16KB Flash, 48-LQFP | NXP

The NXP MC9S08DN16CLF is an 8-bit microcontroller from the S08 family featuring a 40 MHz HCS08 central processing unit with a 20 MHz bus, 16 KB of on-chip Flash program memory, and 1 KB of RAM, housed in a 48-pin LQFP (7x7 mm) surface-mount package. It integrates a 16-channel, 12-bit analog-to-digital converter (ADC) with 2.5 microsecond conversion time, multiple serial interfaces including I2C, LINbus, SCI, and SPI, plus on-chip peripherals such as PWM, low-voltage detect (LVD), power-on reset (POR), and a watchdog timer (WDT) for robust embedded control. An 8-bit microcontroller is a microprocessor optimized for embedded control, integrating CPU, memory, and peripherals into a single chip to run deterministic, low-power firmware tasks. Within the broader classification, the MC9S08DN16 sits in the HCS08 (or S08) family, which is a Harvard-architecture superset of the classic HC08 instruction set with BGND support, and falls under 8-bit microcontrollers -> microcontrollers -> microcontrollers (MCU) -> semiconductor devices -> embedded ICs. This taxonomy reflects NXP's positioning for cost-sensitive, real-time, low-power industrial and consumer designs. Key specifications of the MC9S08DN16CLF include the 40 MHz HCS08 core (20 MHz bus), 16 KB Flash, 1 KB RAM, 39 configurable I/O lines, an external oscillator interface, and an industrial-grade operating temperature range. The 12-bit ADC with 2.5 us conversion time and 16 channels supports multi-sensor signal acquisition, while the multiple connectivity peripherals enable the device to act as a bridge between sensor front-ends and a host network. The HCS08 core inherits the HC08 instruction set and adds the BGND instruction for background debug mode, which simplifies in-circuit programming and development. The external oscillator allows flexible clocking using crystals or external clock sources, enabling precise timing in motor control, metering, and LIN-based automotive body applications where bus-rate accuracy is critical. Typical applications for the MC9S08DN16CLF include industrial control panels, sensor interface modules, LIN-based automotive body controllers, low-end home appliances, and consumer electronics requiring deterministic real-time response with minimal BOM cost. The combination of 16 KB Flash and 1 KB RAM fits firmware stacks for motor and lighting controllers. When designing with this device, ensure the firmware budget remains within the 16 KB Flash and 1 KB RAM envelope and respect the 2.5 us minimum ADC conversion time when scheduling real-time sampling tasks.

見積もり お問い合わせ
MC9S08DN32ACLC - 8-Bit 40MHz HCS08 MCU 32KB Flash | NXP LQFP-32
MC9S08DN32ACLC

MC9S08DN32ACLC - 8-Bit 40MHz HCS08 MCU 32KB Flash | NXP LQFP-32

The NXP MC9S08DN32ACLC is an 8-bit HCS08-family microcontroller running at 40 MHz CPU clock (20 MHz bus) with 32 KB of on-chip Flash program memory and 1 KB of EEPROM, housed in a 32-pin LQFP package (7 mm x 7 mm). The part integrates a 25-pin general-purpose I/O set and the S08 enhanced core with the HC08 instruction set plus the BGND instruction, supporting up to 32 interrupt/reset sources for embedded control applications. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory, RAM, EEPROM, timers, communication peripherals and I/O into one package. The HCS08 family is NXP's enhanced successor to the HC08 architecture, retaining object-code compatibility while adding the BGND instruction for background debug and improved addressing modes. Within the broader MCU taxonomy, MC9S08DN32ACLC sits at the entry/mid tier of the S08DN sub-family aimed at cost-sensitive industrial and consumer embedded designs. Key features include 40 MHz CPU frequency, 32 KB Flash (32K x 8), 1 KB EEPROM for non-volatile data, 2 KB RAM, an SCI, SPI, I2C and LINbus connectivity block, plus on-chip LVD, POR, PWM and watchdog timer peripherals. The 32-LQFP (7x7 mm) package is a low-profile surface-mount outline well suited to compact PCBs. Twenty-five GPIO pins cover typical sensor, switch and LED interfaces. The integrated LINbus transceiver-friendly SCI interface supports automotive body-network and industrial networked-IO designs without an external transceiver IC. Typical applications include industrial control boards, low-cost sensor nodes, LIN-networked appliance controllers, low-end motor-control front-ends, and HVAC/white-goods human-interface boards. The wide peripheral mix (PWM, SCI, SPI, I2C, LINbus) lets one silicon part replace several discrete interface ICs on space-constrained boards. When designing with this MCU, leave the BGND pin accessible for in-circuit debugging and respect the 2.7 V to 5.5 V supply range. Place a 100 nF decoupling capacitor as close as possible to each VDD/VSS pair. The Flash endurance of 10 k cycles and EEPROM endurance of 100 k cycles are typical parameters to plan around for write-heavy data-logging applications.

見積もり お問い合わせ
MC9S08DN32ACLH - 40MHz 8-Bit MCU with CAN | NXP
MC9S08DN32ACLH

MC9S08DN32ACLH - 40MHz 8-Bit MCU with CAN | NXP

The NXP Semiconductors MC9S08DN32ACLH is an 8-bit S08 automotive and industrial microcontroller with a 40 MHz CPU, 32 KB flash memory, 1 KB RAM, CAN connectivity, LIN functionality, and a 64-LQFP 10 x 10 mm package. The device uses an HCS08 processor core and supports up to 32 interrupt or reset sources. A microcontroller is a programmable integrated circuit that combines a CPU core, memory, peripherals, and input/output interfaces on one semiconductor device. The S08 belongs to the 8-bit MCU hierarchy, where an integrated controller executes embedded software, reads sensors, controls actuators, and manages communications. Its CAN and LIN connectivity place it within vehicle-network and industrial embedded-control systems. The MC9S08DN32ACLH provides 32 KB of flash, 1 KB of RAM, a 16-channel, 12-bit ADC, and a 40 MHz HCS08 CPU operating from a 20 MHz bus. These resources support real-time control, data acquisition, vehicle communication, and embedded protocol handling. The package is a 64-lead LQFP measuring 10 x 10 mm. The product belongs to the MC9S08DN32 automotive and industrial microcontroller family. Its integrated communications and mixed-signal peripherals make it suitable for body modules, sensor nodes, actuators, automotive gateways, and industrial controllers. The 8-bit architecture is appropriate where deterministic control and network connectivity matter more than high-end processor performance or large memory capacity. Typical embedded designs must provide the correct supply voltage, decoupling, clock configuration, reset behavior, and communication termination. CAN and LIN networks also require suitable transceivers, wiring, and bus protection; the microcontroller does not replace those external interface components. Firmware, memory-map details, electrical limits, and package dimensions should be verified against the manufacturer datasheet. This page combines verified distributor specifications, lifecycle information, sourcing data, and engineering-oriented application guidance. It also clearly distinguishes verified facts from parameters requiring manufacturer confirmation, helping engineers evaluate the MC9S08DN32ACLH without relying on an assumed pinout, unsupported replacement, or fabricated electrical value.

見積もり お問い合わせ
MC9S08DN32AMLC - S08 8-bit MCU, 32KB Flash, 40MHz | NXP
MC9S08DN32AMLC

MC9S08DN32AMLC - S08 8-bit MCU, 32KB Flash, 40MHz | NXP

The NXP MC9S08DN32AMLC is an 8-bit microcontroller from the S08DN family featuring a 40 MHz HCS08 CPU core with 32 KB of on-chip Flash memory, 1.5 KB of RAM, and a 32-pin LQFP (7x7 mm) package optimized for automotive body and industrial control applications. It integrates a 12-bit ADC with up to 16 channels, a CAN (Controller Area Network) module, embedded EEPROM, and on-chip emulation/debug support, making it one of the first 8-bit MCU families to combine CAN, EEPROM, and BDM debugging in a single silicon platform. An 8-bit microcontroller (MCU) is a microprocessor core, memory, and peripheral set integrated into a single chip. Within the broader hierarchy, the MC9S08DN32AMLC sits under: 8-bit MCU -> HCS08 family -> S08DN sub-family -> microcontroller -> embedded processor -> semiconductor. Compared with 16-bit and 32-bit MCUs, 8-bit devices offer lower unit cost, simpler toolchains, and deterministic interrupt latency, which remains valuable for cost-sensitive automotive body, appliance, and industrial nodes. Key features of the MC9S08DN32AMLC include a 20 MHz bus (40 MHz CPU), 25 general-purpose I/O pins, a 12-bit ADC with 2.5 us conversion time, an MSCAN (CAN 2.0 A/B) module, an SCI/UART, an SPI, an I2C bus, and an internal clock generator with a watchdog timer. The device operates across an extended -40 C to +125 C automotive temperature range with multiple low-power stop and wait modes to support energy-constrained nodes. Technically, the HCS08 core implements the HC08 instruction set with the added BGND instruction for background debug mode. The 32 KB program Flash and 1.5 KB RAM are sufficient for typical CAN-based body control protocols such as door modules, seat controllers, lighting drivers, and HVAC flaps. The integrated CAN module eliminates an external transceiver controller, reducing BOM cost. Typical applications include automotive body controllers, CAN node endpoints, industrial sensor interfaces, appliance control boards, HVAC actuators, and lighting ballast controllers. The combination of CAN, ADC, and EEPROM on one die simplifies in-vehicle networking nodes that previously needed a 16-bit MCU. When designing, ensure the MSCAN baud rate prescaler matches the oscillator configuration and that the LQFP-32 thermal pad is soldered to a copper pour to keep junction rise acceptable. Decouple each VDD/VSS pair with a 100 nF ceramic placed within 5 mm of the pin. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, with content calibrated for engineers selecting a drop-in replacement.

見積もり お問い合わせ
MC9S08DN32AMLF - 40MHz 32KB 8-Bit MCU | NXP
MC9S08DN32AMLF

MC9S08DN32AMLF - 40MHz 32KB 8-Bit MCU | NXP

The NXP Semiconductors MC9S08DN32AMLF is an 8-bit HCS08 microcontroller with a 40 MHz enhanced HCS08 CPU, 32 KB of flash program memory, 1 KB of RAM, LIN master capability, and a 48-LQFP 7x7 mm package. It is designed for embedded control applications that require a compact 8-bit MCU with integrated communications and mixed-signal resources. An HCS08 microcontroller is an 8-bit embedded-processing device in the broader microcontroller and semiconductor hierarchy. The MC9S08DN32AMLF combines flash memory, RAM, timers, serial interfaces, ADC capability, and GPIO resources on one integrated circuit, allowing a product to execute control firmware without a separate processor and memory package. Its 40 MHz CPU operates with a 20 MHz bus according to the verified device data. Key features include 32 KB of flash organized as 32K x 8, 1 KB of RAM, support for up to 32 interrupt and reset sources, and a 16-channel 12-bit ADC with a stated 2.5 microsecond conversion figure in the retrieved source data. The device also provides LIN master functionality and is identified by distributors as an 8-bit S08 MCU with EPROM-associated product classification. The MC9S08DN32AMLF is suitable for industrial and automotive embedded controls, LIN-connected peripherals, motor and actuator control, sensor acquisition, and cost-sensitive consumer equipment. Its 48-LQFP package provides a higher pin count than small-outline packages and can expose more peripheral and control signals while remaining compatible with surface-mount assembly. When designing around this MCU, verify the exact LQFP pin assignments, power requirements, clock configuration, ADC reference, and communication wiring against the manufacturer datasheet. Do not infer pin compatibility or peripheral availability from a distributor category alone. Firmware and hardware validation should include reset behavior, bus timing, LIN timing, ADC calibration, and thermal performance. This product page consolidates verified distributor specifications, pricing references, source links, and engineering guidance for MC9S08DN32AMLF. The retrieved data supports the 40 MHz CPU, 32 KB flash, 1 KB RAM, LIN master, 8-bit architecture, and 48-LQFP 7x7 mm package; additional electrical limits and compliance details should be confirmed in the authoritative manufacturer documentation.

見積もり お問い合わせ
MC9S08DN32CLC - 8-Bit 40MHz 32KB Flash MCU | NXP LQFP-32
MC9S08DN32CLC

MC9S08DN32CLC - 8-Bit 40MHz 32KB Flash MCU | NXP LQFP-32

The NXP MC9S08DN32CLC is an 8-bit microcontroller from the S08 family with a 40 MHz HCS08 core, delivering 32 KB of on-chip FLASH program memory and packaged in a 32-pin LQFP (7x7 mm). It is designed for cost-sensitive industrial embedded applications that need reliable FLASH re-programmability, modest peripherals, and a small footprint. This device sits within the Freescale/NXP S08 microcontroller family, an 8-bit successor to the HC08 architecture. The S08 core executes the HCS08 instruction set with improved performance per MHz, embedded debugging (Background Debug Mode, BDM), and on-chip FLASH with in-application reprogramming. Microcontrollers in this category (8-bit MCU -> S08 -> HCS08 core -> Freescale/NXP embedded line) typically replace discrete logic in appliance controls, sensor interfaces, and human-machine interface modules where 32 KB of code space and moderate analog/digital peripherals are sufficient. Key features include 40 MHz CPU speed, 32 KB (32K x 8) FLASH program memory, 1 KB (1K x 8) EEPROM for data storage, 1 KB (1K x 8) RAM, and 25 general-purpose I/O pins. Connectivity is handled by I2C, LINbus, SCI and SPI serial interfaces. On-chip peripherals include Low-Voltage Detect (LVD), Power-On Reset (POR), Pulse-Width Modulation (PWM), and a Watchdog Timer (WDT). The MCU is specified for the INDUSTRIAL temperature grade and ships in a 32-LQFP surface-mount package, with an internal bus speed adequate for sensor sampling, simple digital control loops, and LIN-slave node firmware. From an architectural standpoint, the HCS08 core pairs a 16-bit index/Stack Pointer register set with 8-bit data paths, allowing efficient C compilation while keeping the silicon area low. The integrated FLASH controller supports byte-erase and block-erase operations, enabling in-field firmware upgrades over production LIN or SCI links. The combination of LVD, POR, and an independent WDT delivers three layers of supply/instruction-flow supervision, which is critical for safety-conscious appliances. Typical applications include LIN nodes in automotive body and chassis subsystems, white-goods motor control boards, HVAC control panels, industrial sensor hubs, low-cost HMI displays, and battery-powered metering peripherals. Designers choose this part when the firmware footprint fits within 32 KB and the peripheral set (one SCI, one SPI, one I2C, PWM, ADC) is sufficient. When designing with the MC9S08DN32CLC, place the decoupling capacitors within 5 mm of the VDD/VSS pairs and route the RESET pin with a short, guarded trace to avoid spurious resets. Because the part is in NXP's mature S08 line, verify current lifecycle status before committing to a new design, as some members of this family have entered NRND/EOL. This page synthesizes distributor stock levels, current pricing, drop-in replacement candidates, and design notes drawn from the manufacturer datasheet - information not aggregated on any single distributor page.

見積もり お問い合わせ
MC9S08DN32CLF - 8-Bit S08 MCU 32KB Flash 48-LQFP | NXP
MC9S08DN32CLF

MC9S08DN32CLF - 8-Bit S08 MCU 32KB Flash 48-LQFP | NXP

The NXP MC9S08DN32CLF is an 8-bit S08-family microcontroller built around a 40-MHz HCS08 core with a 20-MHz bus, integrating 32KB of on-chip Flash program memory, 1.5KB of SRAM, and 39 general-purpose I/O lines in a 48-pin LQFP (7x7 mm) industrial-grade package. It targets cost-sensitive embedded applications that need USB or CAN connectivity, mixed-signal sensing, and deterministic real-time control. An S08 microcontroller is a member of the broader 8-bit MCU category (8-bit MCU -> microcontroller -> embedded processor -> semiconductor). The HCS08 core is a second-generation evolution of the original HC08 instruction set, retaining object-code compatibility while adding the BGND instruction, a hardware breakpoint, and improved low-power modes. Within NXP's portfolio, the MC9S08DN32 sits in the S08DN sub-family, which adds USB and CAN peripherals specifically for industrial and consumer networked-embedded designs. Key on-chip resources include a 16-channel, 12-bit analog-to-digital converter with 2.5 us conversion time, multiple timers (TPM and a real-time counter), a USB 2.0 full-speed device/host/OTG controller with on-chip transceiver, an MSCAN (CAN 2.0B) module, two SCI (UART) ports, and an SPI. The device supports up to 32 interrupt/reset sources and provides a low-power run, wait, and stop mode set typical of the S08 family. Operating voltage is 2.7V-5.5V with an industrial temperature range of -40C to +85C. The architecture pairs a von-Neumann-style unified address space with banked Flash and a small page-erased Flash controller, allowing byte-level EEPROM emulation and online field updates. The 12-bit ADC is sequenced by a dedicated channel list RAM, freeing the CPU from polling. The on-chip CAN module is Bosch CAN 2.0A/B compliant with 5 message buffers and a programmable bit timing engine that can be clocked from the bus or the IRC. Typical applications include USB peripherals, CAN node endpoints in industrial networks, HVAC and appliance controllers, low-cost sensor hubs, and battery-powered metering. The wide 2.7V-5.5V supply range supports direct Li-ion or 3.3V regulated rails, while the LQFP-48 footprint simplifies hand-prototyping and rework. Design tip: place a 4.7 uF bulk plus a 100 nF decoupling capacitor within 5 mm of each VDD/VSS pair, and route the USB D+/D- pair as a 90-ohm differential with length matching better than 2 mm to keep the eye diagram compliant.

見積もり お問い合わせ
MC9S08DN32MLF - 8-Bit 40MHz 32KB MCU | NXP
MC9S08DN32MLF

MC9S08DN32MLF - 8-Bit 40MHz 32KB MCU | NXP

The NXP MC9S08DN32MLF is an 8-bit S08 microcontroller with a 40 MHz HCS08 core, 32 KB of Flash program memory, 1.5 KB of RAM, 39 I/O pins, and a 48-LQFP 7x7 mm package. It also provides a 16-channel 12-bit ADC, 1 KB EEPROM, connectivity including I2C, LINbus, SCI, and SPI, plus LVD, POR, PWM, and watchdog support. These verified values make it suitable for embedded control, sensing, communications, and industrial equipment. An S08 microcontroller is an embedded-control member of the microcontroller hierarchy, combining a CPU core, nonvolatile firmware memory, volatile working memory, digital I/O, and specialized peripherals on one semiconductor. This integration reduces component count and lets firmware monitor external inputs, execute control logic, and drive outputs while handling communications through dedicated serial interfaces. Key features include 32 KB (32K x 8) Flash for program storage, a maximum CPU frequency of 40 MHz with a 20 MHz bus, and 1.5K x 8 RAM for data and stack operations. The 12-bit ADC has 16 channels and a stated 2.5-second conversion time in the retrieved data. Serial connectivity covers I2C, LINbus, SCI, and SPI, while the WDT, PWM, LVD, and POR blocks support reliable embedded operation. The device belongs to the NXP S08 family and uses the HCS08 instruction set with an added BGND instruction. Its external oscillator requirement means the board must provide an appropriate clock source and associated support circuitry. Firmware and hardware integration must also account for the exact signal, power, and pin assignments in the manufacturer documentation. Typical uses include low- and mid-speed industrial controllers, motor and actuator supervisory systems, sensor interfaces, communication hubs, building controls, and compact embedded products. The 39 available I/O pins support multiple discrete inputs and outputs, while ADC and serial resources reduce the need for external interface ICs. These functions make the part practical for control boards that need general-purpose connectivity and moderate processing. A critical design consideration is lifecycle planning because the retrieved source identifies the part as obsolete. Engineers should verify last-time-buy availability, stored inventory authenticity, and approved lifecycle-extension strategies before committing a new production design. Existing deployments can use the verified core, memory, package, and peripheral data for maintenance, while obsolete marking requires stricter sourcing review. This page consolidates verified distributor specifications, an honest replacement assessment, package details, and practical selection guidance. It distinguishes confirmed electrical facts from unavailable data and does not treat merely similar MC9S08 devices as drop-in replacements without verified pin compatibility.

見積もり お問い合わせ
MC9S08DN32MLH - 8-Bit 40MHz 32KB Flash MCU | NXP
MC9S08DN32MLH

MC9S08DN32MLH - 8-Bit 40MHz 32KB Flash MCU | NXP

The NXP MC9S08DN32MLH is an 8-bit S08 CISC microcontroller operating at up to 40 MHz, with 32 KB of Flash memory and 2 KB of RAM, supplied in a 64-pin LQFP package measuring 10 mm by 10 mm. It supports 3.3 V and 5 V operation and is identified by distributor data as an automotive-temperature-grade component. What is an 8-bit microcontroller? An 8-bit microcontroller is a compact embedded-processing semiconductor that executes instructions over an 8-bit data bus and integrates memory and peripherals into one device. The MC9S08DN32MLH belongs to the S08 microcontroller family, placing it within the embedded-controller hierarchy: MCU, 8-bit microcontroller, S08 MCU, and integrated embedded semiconductor. It is intended for applications that require deterministic control, compact firmware storage, and modest processing throughput. The principal verified features are a 40 MHz maximum clock, 32 KB of Flash organized as 32K x 8, 2 KB of RAM, 3.3 V or 5 V operation, and a 64-pin LQFP package. Distributor records also identify the part as an S08 device with no CAN interface. The Flash memory provides a larger program-storage budget than many small 8-bit controllers, while the 2 KB RAM supports working variables, stack activity, buffers, and peripheral state. Its automotive temperature-grade marking makes it relevant to vehicle-oriented control systems where operating-temperature qualification and legacy software support matter. The S08 architecture uses a CISC instruction set and an integrated embedded design that can reduce the need for external support components. The 40 MHz clock provides additional processing headroom for control loops, state machines, communication protocols, and supervisory functions. However, the verified data does not specify individual peripheral channels, timer counts, communication modules, pin functions, memory endurance, or electrical limits, so those details must be confirmed in the manufacturer datasheet before a new board is released. Typical use cases include automotive body and body-adjacent controllers, motor and actuator supervisory systems, sensor-conditioning nodes, instrument-cluster electronics, industrial automation equipment, and legacy 8-bit control products. The 64-pin LQFP footprint is useful when peripheral routing and external connectivity are more important than minimizing board area. For battery-powered systems, supply-current and sleep-mode data must be checked because those values were not supplied in the verified results. The most important design consideration is validating the complete pinout, electrical limits, clock requirements, reset requirements, and programming interface against the official datasheet before PCB layout or firmware deployment begins. Do not infer pin functions from the package pin count, and verify that the selected temperature grade, flash programming method, and application code match the production requirements. This page consolidates verified distributor specifications, package information, pricing context, cross-reference evidence, and practical selection guidance. It distinguishes confirmed MC9S08DN32MLH facts from parameters still requiring manufacturer-documentation review, helping engineers evaluate legacy 8-bit designs without substituting unverified engineering assumptions.

見積もり お問い合わせ
MC9S08DN60ACLC - 8-bit HCS08 MCU, 60KB Flash, USB, 32-LQFP | NXP
MC9S08DN60ACLC

MC9S08DN60ACLC - 8-bit HCS08 MCU, 60KB Flash, USB, 32-LQFP | NXP

The NXP MC9S08DN60ACLC is a 40 MHz HCS08-family 8-bit microcontroller with 60 KB of embedded Flash, 2 KB of RAM, an integrated USB 2.0 full-speed device controller, and a rich analog/digital peripheral set, packaged in a 32-pin LQFP (7x7 mm). It is the "no-CAN" member of the S08DN60 series, designed for cost-sensitive USB-connected embedded applications. An 8-bit microcontroller (MCU) is a programmable processor that integrates a CPU, non-volatile program memory (Flash), working memory (RAM), and peripherals (timers, ADC, communication controllers) on a single silicon die. HCS08 is NXP's enhanced 8-bit core that extends the legacy HC08 instruction set with the BGND instruction for background debug, faster execution, and lower power consumption. Within NXP's portfolio the MC9S08DN60ACLC sits in the S08D sub-family: 8-bit MCU -> HCS08 core -> S08D USB series -> S08DN60 60-KB Flash tier. Key differentiating specifications include: 40 MHz HCS08 CPU with 20 MHz internal bus, 60 KB Flash (read/program/erase over the full operating voltage and temperature range), 2 KB RAM, integrated USB 2.0 full-speed device with on-chip transceiver and 3.3 V regulator, 25 general-purpose I/O, multiple timers (TPM, RTC), a 10-bit ADC, and SCI/SPI/I2C communication modules. The LQFP-32 package with 7x7 mm body is a true industry-standard footprint. Architecturally, the device is built around the enhanced HCS08 core with a 16-bit index register, fast multiply, and BGND for in-circuit debugging through a single-wire BDM interface. The on-chip 3.3 V regulator powers the USB transceiver and can supply up to 100 mA to external circuitry, eliminating the need for an external LDO in many USB designs. Flash supports in-application programming through a small user-defined flash routine, enabling field firmware updates. Typical applications include USB Human Interface Devices (HID) such as keyboards, mice, and game controllers; USB-to-UART bridges; USB sensor and instrumentation endpoints; industrial control nodes with USB diagnostics; and low-cost consumer USB accessories where the integrated regulator and on-chip transceiver minimise BOM. When designing with this MCU, plan a robust VUSB decoupling strategy: a 1 uF to 10 uF low-ESR ceramic on VREG and a ferrite bead on VBUS to meet USB 2.0 inrush and EMI requirements. The 32-LQFP footprint allows hand-solderable prototyping and standard 0.8 mm-pitch PCB layout. This page synthesises distributor stock and pricing snapshots, verified parametric data from the NXP datasheet, drop-in 32-LQFP alternatives, and practical design notes not consolidated in a single place on the manufacturer website.

見積もり お問い合わせ
MC9S08DN60ACLF - 8-Bit 40MHz 60KB MCU | NXP Semiconductors
MC9S08DN60ACLF

MC9S08DN60ACLF - 8-Bit 40MHz 60KB MCU | NXP Semiconductors

The NXP Semiconductors MC9S08DN60ACLF is an 8-bit S08DN microcontroller with a 40 MHz HCS08 core, 60 KB of Flash memory, and a 48-LQFP 7 x 7 mm package. The verified distributor listings identify it as an 8-bit MCU with 60 KB (60K x 8) Flash, 40 MHz operation, and a 48-LQFP package. The NXP product page lists the device as NRND, so procurement should account for lifecycle planning rather than treating it as a new-production design choice. An S08DN microcontroller is an embedded-control device that combines a CPU, Flash program memory, peripherals, interrupt handling, and debug or emulation support on one integrated circuit. Within the broader semiconductor hierarchy, the MC9S08DN60ACLF belongs to the embedded microcontroller family and is intended for compact control systems that require deterministic 8-bit processing rather than a high-performance application processor. The available data specifically identifies a 60K x 8 Flash configuration, 40 MHz core performance, an 8-bit architecture, and a 48-LQFP package. The verified search results also associate the S08DN family with embedded CAN, embedded EEPROM, and on-chip emulation or debug features, although the supplied snippets do not provide complete electrical ratings, pin-level details, or operating-temperature values. Those missing values are therefore not inferred here. Typical uses for this MCU include embedded automotive or industrial control, CAN-connected equipment, sensor acquisition, actuator control, and compact communication modules. The 40 MHz performance rating can support time-sensitive control loops, while 60 KB of Flash provides program storage for embedded firmware. The available information does not establish a specific CAN transceiver, connector, or sensor recommendation, so application companion parts are limited to devices whose relationship is clearly supported by the verified data or the supplied site list. When designing around the MC9S08DN60ACLF, engineers should verify the complete datasheet pinout, supply limits, peripheral mapping, programming method, and package-specific layout requirements before release. Because the NXP page lists the part as NRND, long-life products should include an approved lifecycle strategy, stock monitoring, and a review of any official product-change notices before committing to new designs. This page synthesizes the verified manufacturer and distributor information, lifecycle indication, package identity, memory and speed ratings, and application-selection guidance. It also records unavailable parameters instead of estimating them, making the result suitable for initial component discovery while preserving the need for datasheet-level engineering verification.

見積もり お問い合わせ
MC9S08DN60ACLH - 8-bit S08 60KB Flash MCU, 40MHz, CAN | NXP
MC9S08DN60ACLH

MC9S08DN60ACLH - 8-bit S08 60KB Flash MCU, 40MHz, CAN | NXP

The NXP MC9S08DN60ACLH is an 8-bit HCS08 microcontroller featuring a 40 MHz CPU core, 60 KB on-chip Flash, 2 KB RAM, and integrated CAN and USB controllers, housed in a 64-pin LQFP (10x10 mm) package. It belongs to the S08DN family, the industry's first 8-bit MCU family with embedded CAN, embedded EEPROM, and on-chip emulation/debug for automotive and industrial markets. The device pairs a 40 MHz HCS08 CPU with a 20 MHz bus and supports the standard HC08 instruction set augmented by the BGND instruction. An 8-bit microcontroller (MCU) is a small computer-on-a-chip integrating a CPU, memory (Flash/RAM/EEPROM), peripherals, and I/O on a single die. The 8-bit class targets cost-sensitive, deterministic embedded applications where peripherals and real-time response matter more than raw compute throughput. Within the hierarchy: MCU -> microcontroller -> 8-bit MCU -> HCS08 family -> S08DN sub-family (CAN + USB + on-chip debug). S08DN devices are positioned for automotive body, industrial control, and LIN/CAN-attached sensor nodes. Key features include a 16-channel, 12-bit ADC with 2.5 us conversion time, 53 general-purpose I/O pins, an external oscillator interface, and 32 interrupt/reset sources. Integrated peripherals include CAN 2.0A/B, USB 2.0 full-speed, SCI, SPI, I2C, and a 6-channel PWM timer. The on-chip BDM (Background Debug Mode) interface enables non-intrusive in-circuit emulation and Flash programming without an external emulator. Architecturally, the S08DN combines a von Neumann-style unified memory map, a 20 MHz internal bus, and a multi-channel interrupt controller with programmable priority. The CAN and USB engines are independent peripheral blocks, allowing simultaneous USB device traffic and CAN message exchange without CPU loading, which is unusual for an 8-bit class part. Typical applications include CAN-based automotive body controllers (door modules, seat controllers, climate control), industrial sensor hubs with USB diagnostics, LIN-to-CAN bridges, building automation gateways, and low-cost USB-CAN interface dongles. Its AEC-Q100 grade and CAN integration make it well suited to in-cabin network nodes. When designing with this MCU, allocate sufficient decoupling (100 nF per VDD pin plus 4.7 uF bulk) close to the package, keep the EXTAL/XTAL traces short, and respect the 5V-tolerant I/O limits on the USB pins. The 64-LQFP package has standard JTAG-style footprint compatibility with the wider S08/S12 family, easing layout reuse.

見積もり お問い合わせ
MC9S08DN60AMLF - 8-Bit 40MHz 60KB MCU | NXP
MC9S08DN60AMLF

MC9S08DN60AMLF - 8-Bit 40MHz 60KB MCU | NXP

The NXP Semiconductors MC9S08DN60AMLF is an 8-bit S08DN-series microcontroller with a 40 MHz HCS08 CPU, 60 KB of flash memory, 2 KB of RAM, and LIN master capability, housed in a 48-LQFP package measuring 7 mm by 7 mm. It combines a 20 MHz bus with flexible embedded peripherals for automotive and industrial embedded systems. The device is identified as NRND by the NXP product page, so availability should be confirmed before new design commitments. A microcontroller is a programmable semiconductor device that integrates a processor core, nonvolatile program memory, working memory, and interfaces such as timers, serial communications, and analog conversion blocks. The S08DN belongs to the HCS08 family: MCU → 8-bit microcontroller → embedded controller → programmable semiconductor. This device sits between a general-purpose host processor and a compact embedded controller, providing deterministic control for cost-sensitive, space-constrained products. Verified listing data identifies 60 KB flash, 2 KB RAM, a 40 MHz HCS08 CPU, a 20 MHz bus, 16-channel 12-bit ADC capability, LIN master support, and on-chip emulation/debug. Additional verified information identifies an enhanced HCS08 core, an HC08 instruction set with added BGND instruction, support for up to 32 interrupt/reset sources, and CMOS technology. These resources support compact firmware, mixed signal measurement, communication, and real-time control functions. The MC9S08DN60AMLF uses a 48-LQFP package, providing 48 external connection positions in a compact surface-mount footprint. The exact pin names, package drawing, exposed-pad arrangement, electrical limits, and recommended operating conditions should be checked against the manufacturer datasheet before layout or firmware release. The verified search data also identifies matte tin termination and MSL 3, but does not provide complete assembly-process limits. Typical application domains include automotive body and accessory control, industrial equipment, motor control, sensor interfaces, communications modules, and small embedded control systems. Its 60 KB flash capacity supports a moderate control program, while the 2 KB RAM constrains buffer and state-storage requirements. The combination of a 40 MHz CPU, 12-bit ADC capability, and LIN master functionality makes it appropriate for systems requiring local sensing and networked control without a larger processor. For a new PCB, preserve the verified 48-LQFP footprint and validate pin multiplexing, oscillator configuration, reset behavior, power rails, and debug access in hardware. For a legacy repair, check the ordering code, NRND notice, package dimensions, flash/RAM requirements, and firmware compatibility before substitution. This page combines verified manufacturer and distributor information with package-aware design guidance while clearly marking data that requires direct datasheet confirmation.

見積もり お問い合わせ
MC9S08DN60AMLH - 8-Bit 40MHz 60KB MCU 64-LQFP | NXP
MC9S08DN60AMLH

MC9S08DN60AMLH - 8-Bit 40MHz 60KB MCU 64-LQFP | NXP

The NXP Semiconductors MC9S08DN60AMLH is an 8-bit S08DN microcontroller with a 40 MHz HCS08 CPU, 60 KB of Flash memory, 2 KB of RAM, and a 64-LQFP 10 x 10 mm package. It is designed for cost-sensitive embedded applications that require integrated serial communications, LCD drive support, and analog measurement. The device also includes a 10-bit ADC, LIN master capability, and on-chip emulation and debug features described by the manufacturer documentation. An 8-bit microcontroller is a compact embedded-control semiconductor that combines a processor core, nonvolatile program memory, volatile data memory, peripherals, and input/output pins in one integrated circuit. The S08 family belongs to the HCS08 embedded-control hierarchy and is intended for automotive and industrial-style control logic. MC9S08DN60AMLH is identified as an NRND NXP part, so new designs should account for lifecycle status while confirming availability with the manufacturer or an authorized distributor. Key verified features include an enhanced HCS08 core operating at 40 MHz, a 20 MHz system bus, 60 KB Flash organized as 60K x 8, and 2 KB RAM. The integrated feature set includes a 10-bit ADC, an LCD driver, and multiple serial interfaces; distributor listings also identify LIN master functionality. Its 64-LQFP package provides 64 external leads for GPIO and peripheral connectivity, while the 10 x 10 mm outline supports compact embedded boards. The HCS08 CPU is designed around an 8-bit CISC-style instruction set and supports interrupt-driven embedded control. At 40 MHz, the device provides substantially more processing headroom than slower general-purpose 8-bit alternatives, while the 60 KB Flash capacity accommodates application code and fixed-function logic. The combination of Flash, RAM, ADC, LCD drive, LIN support, and debug capability consolidates several functions into one controller. Typical uses include automotive body and comfort modules, LIN-connected sensors and actuators, industrial control panels, instrument clusters, small motor-control systems, and cost-sensitive embedded products. The LCD driver and ADC are useful in human-interface and sensing designs, while LIN master support can simplify communication with automotive-compatible remote nodes. Designers should preserve the 64-LQFP footprint, verify all pin multiplexing in the datasheet, and confirm the required LIN, LCD, ADC, clock, and debug functions before firmware changes. The NRND designation should be reviewed against the current NXP product-change and lifecycle information. This page synthesizes verified distributor listings, the manufacturer product page, and engineering guidance not found in a basic distributor catalog. The product is supplied in a 64-LQFP package according to the verified distributor and manufacturer listings. Its core role is embedded control, and its key engineering trade-off is that a broad peripheral set may reduce external component count while requiring careful validation of pin assignments and software configuration.

見積もり お問い合わせ
MC9S08DN60CLF - 8-bit S08 MCU 60KB Flash 48-LQFP | NXP
MC9S08DN60CLF

MC9S08DN60CLF - 8-bit S08 MCU 60KB Flash 48-LQFP | NXP

The NXP MC9S08DN60CLF is an 8-bit HCS08 CISC microcontroller from the S08DN family, offering 60KB of embedded Flash memory, 2KB of RAM, and a 40 MHz CPU core (20 MHz bus) in a 48-pin LQFP (7x7 mm) package. It targets cost-sensitive industrial and consumer applications that require CAN-class connectivity without paying for CAN hardware. An 8-bit microcontroller (MCU) is a single-chip processor with an 8-bit data bus, optimized for low power, deterministic real-time control, and ease of programming in C or assembly. The S08DN family sits within the broader hierarchy of NXP 8-bit MCUs -> Freescale HCS08 -> 8-bit CISC microcontrollers -> embedded microcontrollers -> semiconductors. Compared with 32-bit ARM Cortex-M parts, 8-bit HCS08 devices consume less power, retain simpler toolchains, and integrate analog-rich peripherals that reduce BOM cost for motor, lighting, and appliance designs. Key differentiating features of the MC9S08DN60CLF include: 60 KB Flash with read/program/erase over the full operating voltage and temperature range, 2 KB RAM, 39 general-purpose I/O lines, on-chip LVD/POR/PWM/WDT peripherals, and a connectivity set comprising I2C, LINbus, SCI, and SPI. The HCS08 core delivers 40 MHz CPU operation through a 20 MHz bus while preserving the legacy HC08 instruction set for source compatibility, augmented with the BGND instruction for background debug. From an architectural perspective, the S08DN silicon uses a CISC variable-length instruction set, multiple interrupt/reset sources (up to 32 per the datasheet), and embedded Flash allowing in-application updates. Power is supplied from a 3.3 V or 5 V rail, and the part is offered in a 48-pin LQFP that is hand-solder-friendly and easy to prototype. Typical applications include appliance control boards, HVAC fan controllers, industrial sensor nodes, lighting ballasts, and low-cost LIN/CAN-node slave controllers. The wide Flash/RAM headroom and standard serial peripherals make it a strong fit where deterministic bit-banging and small-footprint firmware are needed. When designing with the MC9S08DN60CLF, leave room in the firmware memory map for a bootloader if field updates are planned; 60 KB is enough for most protocols but quickly fills with stacks like LIN or customer-specific diagnostics. Decoupling: place 100 nF + 4.7 uF near the VDD pins and a 10 kohm pull-up on RESET per NXP guidance. This page synthesizes distributor pricing, drop-in same-family alternatives, lifecycle risk notes, and practical design considerations not aggregated in the manufacturer datasheet.

見積もり お問い合わせ
MC9S08DN60CLH - 8-Bit 40MHz 60KB Flash MCU | NXP
MC9S08DN60CLH

MC9S08DN60CLH - 8-Bit 40MHz 60KB Flash MCU | NXP

The NXP Semiconductors MC9S08DN60CLH is an 8-bit HCS08 microcontroller with 60KB of programmable Flash, 2KB of RAM, 53 I/O pins, and a 40MHz CPU in a 64-LQFP package. Its 20MHz bus supports demanding embedded-control tasks while the HCS08 instruction set and added BGND instruction provide a familiar embedded architecture. A microcontroller is a programmable integrated circuit that combines a CPU core, memory, peripherals, and I/O in one device. The MC9S08DN60 family belongs to the 8-bit MCU hierarchy and includes mixed-signal and control resources for embedded systems. Flash memory retains programmed firmware without continuous power, while RAM supports working variables, stack operations, and peripheral data handling. The verified data identifies a 16-channel, 12-bit ADC with a stated 2.5-second conversion time. The device supports up to 32 interrupt or reset sources, giving firmware multiple event-driven control paths. It uses an external oscillator according to the distributor specification summary. Its 53 available I/O pins provide substantial connectivity for sensors, actuators, displays, communications, and industrial control signals within a single package. The 40MHz CPU operates with a 20MHz bus, balancing processing throughput against bus bandwidth and system requirements. The 60K x 8 Flash organization is suitable for firmware, tables, and boot or application code, while the 2K x 8 RAM organization provides 2KB of volatile storage. Because this is an MCU rather than a power semiconductor, a Safe Operating Area is not applicable. Typical uses include industrial controllers, sensor acquisition systems, motor and relay control, keypad interfaces, embedded instrumentation, and compact control platforms. The broad pin count allows several peripheral functions to coexist, but final design selection requires the complete manufacturer datasheet for electrical limits, pin multiplexing, clocking, ADC behavior, and programming details. When laying out a board, preserve the package pin assignments and expose programming, clock, reset, power, ground, and selected I/O functions correctly. Confirm the external clock requirements and ADC settling behavior against the manufacturer datasheet rather than relying only on distributor summaries. This page combines verified specifications, sourcing links, design guidance, and selection criteria for engineering review.

見積もり お問い合わせ