MC9S08AW60CFUE - 40MHz 60KB Flash 8-Bit MCU | NXP
部品番号: MC9S08AW60CFUE ✗ 生産終了| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $8.1029 | $8.10 |
| 10 | $8.1029 | $81.03 |
| 100 | $8.1029 | $810.29 |
| 500 | $8.1029 | $4,051.45 |
| 1,000 | $8.1029 | $8,102.90 |
MC9S08AW60CFUE 概要
A microcontroller is a compact embedded-computing device that integrates a processor core, nonvolatile program memory, working memory, input/output ports, and peripherals into one package. The MC9S08AW60CFUE belongs to the HCS08 8-bit MCU hierarchy, where the CPU executes firmware from Flash while RAM supports variables, stack operations, and intermediate data. Its 40 MHz clock provides faster instruction execution than lower-frequency 8-bit designs, making it suitable for real-time control, communication, and mixed signal systems.
Key verified features include 60 KB of Flash memory, 4 KB of RAM, 38 I/O ports according to one product specification source, and connectivity including I2C, SCI, and SPI. The device also includes listed peripherals such as low-voltage detection, power-on reset, pulse-width modulation, and a watchdog timer. The 64-QFP package provides a higher pin count than small-outline packages and supports external peripheral connections, debug access, and system integration.
The MC9S08AW60CFUE uses the HCS08 instruction set with an added BGND instruction, and the verified datasheet description identifies a minimum instruction cycle time of 50 ns under the stated 2.7 V and 20 MHz bus condition. Because the device is an 8-bit MCU, its architecture is generally intended for control logic, sensor interfaces, actuator control, communications, and embedded products rather than high-end application processing.
Typical applications include industrial control panels, automotive body and accessory electronics, instrumentation, motor or relay control, sensor acquisition, serial communication gateways, and compact consumer devices. Designers should select the correct package variant, power range, peripheral configuration, and temperature grade for the target assembly.
For PCB design, preserve the manufacturer-recommended decoupling and exposed programming or debug connections, and verify signal levels against the selected HCS08AW variant. When replacing another MCU, confirm pin assignment, clock requirements, Flash/RAM sizing, peripheral mapping, and software toolchain compatibility rather than relying only on the family name.
This page consolidates verified manufacturer and distributor information, package details, lifecycle status, pricing context, and engineering selection guidance. It is intended to help engineers identify the correct MCU and plan a hardware and firmware migration without assuming that a similarly named part is automatically drop-in compatible.
ドロップイン代替品: MC9S08AW60CFUE — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MC9S08AW60CFUE （同一形状・フットプリント） — 相違点: Package, ADC, Debug Interface, Core, Flash Memory.
クイック比較ツール — 並列比較する代替部品を選択:
MC9S08AW48CFUE
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MC9S08AW48CFUER
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MC9S08AW32CFUE
✅ ドロップイン✓ 在庫あり
$7.18 / 個
データシートを見る →MC9S08AW16CFUE
✅ ドロップイン📋 参考代替品（カタログ未掲載）
S9S08AW60E5MFGE
✅ ドロップイン✓ 在庫あり
$6.05 / 個
データシートを見る →MC9S08AW60MFUE
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MC9S08AW60CFUE 最大定格＆電気的特性
| Product Type | 8-bit HCS08 microcontroller |
| CPU Frequency | 40 MHz |
| Program Memory | 60 KB Flash |
| RAM | 4 KB |
| Core | Enhanced HCS08 8-bit core |
| 電源電圧 | 2.7 V to 5.5 V |
| Internal Bus Frequency | 20 MHz |
| I/O Ports | 38 ports |
| Connectivity | I2C, SCI, SPI |
| Peripherals | LVD, POR, PWM, WDT |
| パッケージ | 64-QFP, 14 x 14 mm |
| Package Height | 1 mm |
| Package Pitch | 0.50 mm |
| 実装スタイル | Surface mount |
| Instruction Cycle | 50 ns minimum at 2.7 V and 20 MHz bus |
| Instruction Set | HC08 instruction set with added BGND instruction |
| Debug Interface | Single-wire background debug mode interface |
| Application Support | Industrial and automotive |
| ライフサイクル状態 | NRND |
| Supplier Reference | NXP USA Inc. |
MC9S08AW60CFUE 0.50 mm ピン配置ガイド
MC9S08AW60CFUE (0.50 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: MC9S08AW60CFUE.
詳細は データシート をご参照ください。
主な用途
MC9S08AW60CFUE の用途: 6 件s: Industrial Control Panel, Automotive Body Control Module, Sensor Acquisition and Conditioning, Serial Communication Gateway, PWM Actuation and Motor Support, Instrumentation and Measurement Front End.
Industrial Control Panel
The MC9S08AW60CFUE fits an industrial control panel that coordinates digital inputs, indicator outputs, relays, and serial service communications. Its 40 MHz enhanced HCS08 core provides processing headroom for control logic, while 60 KB Flash accommodates panel firmware, lookup tables, and communication protocols. I2C and SPI can connect sensors or expansion devices, and SCI can support a service interface. The 2.7 V to 5.5 V supply range simplifies compatibility with common embedded rails. Before layout, verify the exact pin map, voltage levels, reset requirements, and industrial temperature limits for the selected suffix.
おすすめ
Automotive Body Control Module
The MC9S08AW60CFUE is suitable for compact body and accessory-control designs where multiple digital I/O, timing functions, and serial communications are needed. The HCS08AW family is identified as supporting industrial and automotive applications, while the target's 60 KB Flash and 4 KB RAM provide a practical balance for distributed control firmware. PWM, watchdog, low-voltage detection, and power-on reset support robust control behavior. Automotive qualification, transient protection, EMI behavior, and exact temperature requirements must be verified for the particular ordering suffix and production environment rather than inferred from the family statement.
おすすめ
Sensor Acquisition and Conditioning
Use the MC9S08AW60CFUE as the supervisory MCU for a compact sensor node that samples external devices and forwards measurements over a serial link. The 40 MHz core can manage protocol overhead and control logic, while I2C and SPI provide flexible connections to sensors, converters, and memory. Four kilobytes of RAM is suitable for buffering samples and managing protocol state, and 60 KB Flash leaves room for drivers and application logic. The design must account for sensor timing, analog front-end interfaces, pull-up requirements, and pin multiplexing because the verified data does not specify every peripheral channel or alternate-function mapping.
おすすめ
Serial Communication Gateway
The MC9S08AW60CFUE can serve as a gateway controller when a product needs to translate between a host serial link and peripheral equipment. SCI provides a conventional serial interface, while I2C and SPI support sensors, memory, and expansion chips. The 60 KB Flash capacity is useful for protocol stacks and configuration tables, and the 40 MHz clock leaves processing margin for framing and error handling. For production designs, confirm the exact SCI, SPI, and I2C pin multiplexing, interrupt behavior, baud-rate requirements, and electrical levels in the family datasheet and device-specific test conditions.
おすすめ
PWM Actuation and Motor Support
The MC9S08AW60CFUE can supervise PWM-based actuators, indicators, or small motor-control subsystems when the application fits an 8-bit MCU. PWM and watchdog functions help generate timing and maintain safe operation, while the 40 MHz processor supports state-machine and feedback-control software. The device is most appropriate where the load is driven through suitable external power stages rather than directly from MCU I/O. Engineers should verify PWM resolution, timer channels, output drive limits, thermal conditions, and protection requirements from the manufacturer documentation before selecting external transistors, drivers, or flyback networks.
おすすめ
Instrumentation and Measurement Front End
The MC9S08AW60CFUE is appropriate for a compact instrumentation controller that coordinates sensors, digital displays, calibration data, and service communications. Sixty kilobytes of Flash can hold measurement routines, calibration constants, and interface code, while the 40 MHz core supports responsive sampling and menu or protocol handling. SCI and I2C can connect display or host electronics, and PWM may support excitation or reference generation where electrically appropriate. Analog precision, input impedance, ADC requirements, and calibration limits are not supplied in the verified data, so the MCU should be paired with a suitable analog front end rather than treated as a standalone measurement converter.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MC9S08AW60CFUE — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MC9S08AW48CFUE | MC9S08AW48CFUER | MC9S08AW32CFUE | MC9S08AW16CFUE | S9S08AW60E5MFGE | MC9S08AW60MFUE |
|---|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
主な差別化要因
- Largest verified program-memory option among the displayed AW-family comparisons （vs MC9S08AW48CFUE)
- 40 MHz HCS08 performance class （vs MC9S08AW16CFUE)
- Broad embedded peripheral set （vs MC9S08AW32CFUE)
- NXP HCS08AW software continuity （vs MC9S08GT60ACFBER)
設計ノート
Design the supply rails for the verified 2.7 V to 5.5 V operating range and verify every external device shares a compatible logic level. Place the required bypass capacitors close to the device power pins according to the NXP datasheet layout guidance, and account for startup current, peripheral load, and regulator headroom. Since the supplied data does not provide the complete pin map or absolute maximum ratings, do not assign supply pins or I/O limits from memory.
Use the manufacturer 64-QFP land pattern and pin-1 orientation rather than relying on a generic QFP footprint. Confirm the 14 mm by 14 mm body, 0.50 mm pitch, and package height against the selected ordering variant. Keep debug and programming access reachable, maintain clear copper around exposed thermal or power structures if applicable, and validate the final board with the exact MC9S08AW60CFUE footprint and assembly tolerances.
Do not treat another MC9S08AW family member as a drop-in part solely because it has the same core or clock rating. MC9S08AW48CFUE is verified at 48 KB Flash versus 60 KB for the target, while AW32 and AW16 variants have still less memory. Check the linker map, boot configuration, interrupt vector assumptions, peripheral assignments, voltage range, temperature grade, and package suffix before replacing the target.
Verify the communication implementation against the exact device variant. I2C, SCI, and SPI are listed, but the supplied snippets do not provide channel counts, alternate-function mappings, or all timing limits. Confirm pull-ups, bus capacitance, baud-rate settings, signal polarity, pin multiplexing, and peripheral clock requirements in the NXP family datasheet before releasing a PCB or firmware.
コンプライアンス情報
The supplied web results mention industrial and automotive family support, but do not provide verified RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations for the exact MC9S08AW60CFUE ordering code. Confirm current compliance documents with NXP before procurement.
