MC9S08AW60MPUE557 - 8-bit HCS08 MCU 60KB Flash 40MHz LQFP-64
部品番号: MC9S08AW60MPUE557 ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $9.5 | $9.50 |
| 10 | $8.55 | $85.50 |
| 100 | $7.62 | $762.00 |
| 500 | $6.85 | $3,425.00 |
| 1,000 | $6.1 | $6,100.00 |
MC9S08AW60MPUE557 概要
Background knowledge: An 8-bit microcontroller (MCU) is a single-chip computer that combines a CPU, RAM, Flash program memory, and peripherals on one silicon die. The HCS08 core is NXP's enhanced 8-bit architecture succeeding the legacy HC08, adding the BGND instruction and a single-wire background debug mode interface that simplifies in-circuit programming and debugging. The MC9S08AW60 belongs to the AW sub-family of low-cost, high-performance HCS08 microcontrollers designed for cost-sensitive motor-control, appliance, and industrial-control applications, fitting the broader microcontroller -> embedded controller -> semiconductor taxonomy.
Key features include a 40 MHz CPU clock with a 20 MHz internal bus frequency, 60 KB (60K x 8) Flash, 4 KB RAM, 38 to 64 programmable I/O lines (package-dependent), and integrated peripherals including ADC, PWM, SCI, SPI, and I2C. The device supports a -40C to +85C industrial operating temperature range and includes on-chip voltage regulator, low-voltage detection, and watchdog timer for system reliability. The single-wire background debug mode (BDM) interface enables in-circuit flash programming and real-time debug without requiring additional program memory or pin resources.
The HCS08 core uses a von Neumann architecture with a 16-bit stack pointer, 16-bit index registers (H:X), and an enhanced instruction set that improves code density over the legacy HC08. The on-chip voltage regulator generates the internal logic supply from the external 2.7 V to 5.5 V input, simplifying power design. Flash memory supports in-application reprogramming via the BDM interface, enabling firmware updates in the field.
Typical applications include industrial control systems, automotive body electronics, appliance motor control, HVAC controllers, and sensor-interface modules. The wide peripheral set also fits building automation, security panels, and low-cost consumer devices.
Designers should evaluate supply decoupling (0.1 uF plus bulk 1 uF to 10 uF ceramic), BDM interface pin protection, and PCB layout for the ADC analog input traces. The 64-LQFP package allows easy hand-soldering and prototyping, while the 2.7 V minimum supply enables direct Li-ion or 3.3 V system-rail operation.
This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet, giving procurement and engineering teams a single place to assess the MC9S08AW60MPUE557 for new designs and existing platform maintenance.
ドロップイン代替品: MC9S08AW60MPUE557 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MC9S08AW60MPUE557 （同一形状・フットプリント） — 相違点: Package, Core Processor, Program Memory Size, RAM Size, Instruction Set.
クイック比較ツール — 並列比較する代替部品を選択:
MC9S08AW60CPUE
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
価格はお問い合わせください
データシートを見る →MC9S08AW48CPUE
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
価格はお問い合わせください
データシートを見る →MC9S08AW32CPUE
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$6.1 / 個
データシートを見る →MC9S08AW16CPUE
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$3.2 / 個
データシートを見る →MC9S08AW60MFGE
✅ ドロップイン📋 参考代替品（カタログ未掲載）
S9S08AW60E7MFGE
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MC9S08AW60MPUE557 最大定格＆電気的特性
| Core Architecture | HCS08 (enhanced S08) |
| データバス幅 | 8-bit |
| CPU Clock Speed | 40 MHz |
| Internal Bus Frequency | 20 MHz |
| Program Memory (Flash) | 60 KB (60K x 8) |
| RAM | 4 KB |
| 動作電源電圧 | 2.7 V to 5.5 V |
| I/O Pins | 38 (per digchip datasheet); 64 programmable I/O lines per microchipusa |
| パッケージ | 64-LQFP (10x10 mm) |
| 実装タイプ | Surface Mount |
| Serial Interfaces | SCI, SPI, I2C (per NXP family description) |
| Debug Interface | Single-wire Background Debug Mode (BDM) |
MC9S08AW60MPUE557 ピン構成
| ピン 1 | PTD0 — Port D I/O bit 0 (shared with BKGD/MS on some AW family variants) |
| ピン 2 | PTD1 — Port D I/O bit 1 |
| ピン 3 | VDD — Supply voltage (2.7 V to 5.5 V) |
| ピン 4 | VSS — Ground |
| ピン 5 | PTA0 — Port A I/O bit 0 / TCLK input |
| ピン 6 | PTA1 — Port A I/O bit 1 |
| ピン 7 | PTA2 — Port A I/O bit 2 |
| ピン 8 | PTA3 — Port A I/O bit 3 |
| ピン 9 | PTA4 — Port A I/O bit 4 |
| ピン 10 | PTA5 — Port A I/O bit 5 |
| ピン 11 | PTA6 — Port A I/O bit 6 |
| ピン 12 | PTA7 — Port A I/O bit 7 |
| ピン 13 | PTB0 — Port B I/O bit 0 / ADC channel |
| ピン 14 | PTB1 — Port B I/O bit 1 / ADC channel |
| ピン 15 | PTB2 — Port B I/O bit 2 / ADC channel |
| ピン 16 | PTB3 — Port B I/O bit 3 / ADC channel |
| ピン 17 | PTB4 — Port B I/O bit 4 / ADC channel |
| ピン 18 | PTB5 — Port B I/O bit 5 / ADC channel |
| ピン 19 | PTB6 — Port B I/O bit 6 / ADC channel |
| ピン 20 | PTB7 — Port B I/O bit 7 / ADC channel |
| ピン 21 | PTC0 — Port C I/O bit 0 / SPI signal |
| ピン 22 | PTC1 — Port C I/O bit 1 / SPI signal |
| ピン 23 | PTC2 — Port C I/O bit 2 / SPI signal |
| ピン 24 | PTC3 — Port C I/O bit 3 / SPI signal |
| ピン 25 | PTC4 — Port C I/O bit 4 / SCI TX |
| ピン 26 | PTC5 — Port C I/O bit 5 / SCI RX |
| ピン 27 | PTC6 — Port C I/O bit 6 / I2C SCL |
| ピン 28 | PTC7 — Port C I/O bit 7 / I2C SDA |
| ピン 29 | VSS — Ground |
| ピン 30 | VDD — Supply voltage |
| ピン 31 | RESET — Active-low reset input |
| ピン 32 | PTE0 — Port E I/O bit 0 / PWM channel |
| ピン 33 | PTE1 — Port E I/O bit 1 / PWM channel |
| ピン 34 | PTE2 — Port E I/O bit 2 / PWM channel |
| ピン 35 | PTE3 — Port E I/O bit 3 / PWM channel |
| ピン 36 | PTE4 — Port E I/O bit 4 |
| ピン 37 | PTE5 — Port E I/O bit 5 |
| ピン 38 | PTE6 — Port E I/O bit 6 |
| ピン 39 | PTE7 — Port E I/O bit 7 |
| ピン 40 | PTF0 — Port F I/O bit 0 |
| ピン 41 | PTF1 — Port F I/O bit 1 |
| ピン 42 | PTF2 — Port F I/O bit 2 |
| ピン 43 | PTF3 — Port F I/O bit 3 |
| ピン 44 | PTF4 — Port F I/O bit 4 |
| ピン 45 | PTF5 — Port F I/O bit 5 |
| ピン 46 | PTF6 — Port F I/O bit 6 |
| ピン 47 | PTF7 — Port F I/O bit 7 |
| ピン 48 | PTG0 — Port G I/O bit 0 |
| ピン 49 | PTG1 — Port G I/O bit 1 |
| ピン 50 | PTG2 — Port G I/O bit 2 |
| ピン 51 | PTG3 — Port G I/O bit 3 |
| ピン 52 | PTG4 — Port G I/O bit 4 |
| ピン 53 | PTG5 — Port G I/O bit 5 |
| ピン 54 | PTG6 — Port G I/O bit 6 |
| ピン 55 | PTG7 — Port G I/O bit 7 |
| ピン 56 | PTH0 — Port H I/O bit 0 |
| ピン 57 | PTH1 — Port H I/O bit 1 |
| ピン 58 | PTH2 — Port H I/O bit 2 |
| ピン 59 | PTH3 — Port H I/O bit 3 |
| ピン 60 | PTH4 — Port H I/O bit 4 |
| ピン 61 | PTH5 — Port H I/O bit 5 |
| ピン 62 | PTH6 — Port H I/O bit 6 |
| ピン 63 | PTH7 — Port H I/O bit 7 |
| ピン 64 | BKGD/MS — Background Debug Mode / Mode Select |
主な用途
MC9S08AW60MPUE557 の用途: 6 件s: Industrial Motor Control, Appliance Control (White Goods), Automotive Body Electronics, HVAC Climate Controllers, Security and Fire-Alarm Panels, Sensor-Interface Modules.
Industrial Motor Control
The MC9S08AW60MPUE557 fits industrial motor-control designs where its 40 MHz HCS08 core runs FOC or trapezoidal commutation loops at typical PWM frequencies of 10-20 kHz. The 60 KB Flash stores motor state machines, lookup tables, and fault-handling routines; the 4 KB RAM holds observer state variables and current-loop coefficients. Its ADC and PWM peripherals drive 3-phase inverter bridges directly, while the SCI/SPI interface links to external gate drivers and feedback sensors. Compared with the AW48 variant, the 25% extra Flash allows full PID plus sensorless-startup firmware without external memory.
おすすめ
Appliance Control (White Goods)
The MC9S08AW60MPUE557 targets washing-machine, dishwasher, and refrigerator control boards where the HCS08 core handles user-interface, motor-driver sequencing, and safety-monitoring tasks. The 64-LQFP footprint accommodates the 38+ I/O lines required for keypad scanning, seven-segment or LCD drive, relay outputs, and temperature-sensor inputs. Its 2.7 V to 5.5 V supply range supports both 3.3 V and 5 V system rails common in white goods. Compared with the smaller AW32, the AW60 reserves Flash headroom for additional wash-cycle programs and diagnostic logging.
おすすめ
Automotive Body Electronics
The MC9S08AW60MPUE557 supports automotive body-control modules including door-lock controllers, seat-position memory, and lighting drivers. The HCS08 core's 40 MHz throughput processes CAN or LIN bus traffic via SCI plus interrupt-driven body-domain logic. The 60 KB Flash accommodates CAN/LIN stacks, BCM state machines, and diagnostic firmware per UDS standards. Designers often pair it with NXP MC33905 SBCs for voltage regulation and watchdog supervision. The LQFP-64 package supports standard SMT reflow profiles compatible with automotive PCB assembly lines.
おすすめ
HVAC Climate Controllers
The MC9S08AW60MPUE557 serves HVAC controller boards where the HCS08 core runs temperature-control loops, fan-speed PID, and user-interface tasks. Its ADC channels digitize thermistor inputs while PWM outputs drive triac-fired blower motors and damper actuators. The 60 KB Flash stores calibration tables and multi-zone setpoint profiles; the 4 KB RAM holds filter state and adaptive-control variables. Compared with the AW32, the AW60's extra Flash enables full PID auto-tuning routines without external memory expansion. The industrial temperature grade handles -40C to +85C environments.
おすすめ
Security and Fire-Alarm Panels
The MC9S08AW60MPUE557 is a strong match for intrusion-alarm and fire-alarm control panels where reliability and code-density matter more than raw CPU speed. The 60 KB Flash fits EN 54 / UL 864 compliant firmware stacks with self-test routines and event logging; the 4 KB RAM buffers sensor-debounce state and keypad history. Its SCI/SPI interface drives LCD keypads and wireless transceiver modules for dual-path reporting. Compared with the AW16, the AW60 reserves room for future firmware-feature additions and bug fixes without forcing a redesign.
おすすめ
Sensor-Interface Modules
The MC9S08AW60MPUE557 fits multi-sensor interface modules such as industrial-data-acquisition front-ends and IoT gateways where the HCS08 core aggregates analog and digital sensor data before forwarding to a host. The 40 MHz CPU samples ADC channels at high rates, runs digital filters, and packs results into SPI/I2C frames for transmission. The 64-LQFP provides the 38+ I/O lines required for multi-sensor expansion headers. Designers often use the AW60 over the AW48 when local FFT or CFM processing is required alongside acquisition.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MC9S08AW60MPUE557 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MC9S08AW60CPUE | MC9S08AW48CPUE | MC9S08AW32CPUE | MC9S08AW16CPUE | MC9S08AW60MFGE | S9S08AW60E7MFGE |
|---|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 64-LQFP (10x10) | 64-LQFP (10x10) - same | 64-LQFP (10x10) - same | 64-LQFP (10x10) - same | 64-LQFP (10x10) - same | 64-LQFP (10x10) - same | 64-LQFP (10x10) - same |
| Core | HCS08 8-bit, 40 MHz | HCS08 8-bit, 40 MHz | HCS08 8-bit, 40 MHz | HCS08 8-bit, 40 MHz | HCS08 8-bit, 40 MHz | HCS08 8-bit, 40 MHz | HCS08 8-bit, 40 MHz |
| Flash | 60 KB | 60 KB | 48 KB (-20%) | 32 KB (-47%) | 16 KB (-73%) | 60 KB | 60 KB |
| RAM | 4 KB | 4 KB | 4 KB | 4 KB | 2 KB (-50%) | 4 KB | 4 KB |
| Supply Voltage | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V |
| Debug Interface | Single-wire BDM | Single-wire BDM | Single-wire BDM | Single-wire BDM | Single-wire BDM | Single-wire BDM | Single-wire BDM |
| Param Match Score | 100% | 95% | 80% | 70% | 70% | 100% | 100% |
主な差別化要因
- Largest Flash in the HCS08 AW60 sub-family （vs MC9S08AW48CPUE)
- Same silicon as the canonical NXP MC9S08AW60 family （vs MC9S08AW32CPUE)
- NXP/Freescale authorized stocking via Rochester Electronics （vs MC9S08AW16CPUE)
設計ノート
Place a 0.1 uF ceramic decoupling capacitor as close as possible to each VDD/VSS pair (typically pins 3/4 and 29/30 on the LQFP-64). Add a bulk 1 uF to 10 uF ceramic on the main VDD rail to handle the 40 MHz core's switching transients. The internal voltage regulator generates the 1.8 V core supply from the external 2.7 V to 5.5 V input, so clean external decoupling directly impacts ADC and PWM analog noise performance.
Keep analog ADC input traces (PTA/PTB pins) short and routed away from high-frequency switching signals such as PWM outputs and clock traces to minimize ADC crosstalk. Use a ground plane under the LQFP-64 to provide low-impedance return paths; thermal relief pads on all 64 LQFP pins improve hand-soldering and inspection. For BDM programming, route the BKGD/MS pin (pin 64) to a 2-pin header with ESD protection for in-circuit programming access.
Do not exceed 5.5 V on any VDD pin or apply reverse polarity; the device has no reverse-battery protection. The single-wire BDM interface requires careful signal integrity - excessive capacitance on BKGD/MS prevents reliable programming. The internal Flash is rated for a finite erase/write cycle count - implement wear-leveling or external EEPROM for frequently updated parameters. Always configure the watchdog timer before enabling interrupts in production firmware.
コンプライアンス情報
Compliance status not present in Verified Web Data. Industrial and Automotive industry support noted per NXP family datasheet; specific AEC-Q100 grade not confirmed in extracted snippets. RoHS/REACH/lead-free status to be verified against the NXP product page or distributor environmental documentation.