マイクロコントローラ

製品 (20,000+)

MC9S12UF32PB - HCS12 16-Bit MCU, 32KB Flash, 30MHz | NXP
MC9S12UF32PB

MC9S12UF32PB - HCS12 16-Bit MCU, 32KB Flash, 30MHz | NXP

The NXP MC9S12UF32PB is a 16-bit HCS12 microcontroller built around the S12 CPU core, integrating 32KB of on-chip program FLASH and 3.5KB of RAM in a 64-pin LQFP (10x10 mm) package. It runs at a 30 MHz bus speed and supports the standard HCS12 instruction set, making it suitable for legacy automotive body, chassis, and industrial control applications. The device belongs to the HCS12 family, originally introduced by Freescale Semiconductor and now supported by NXP Semiconductors following the 2015 acquisition. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (FLASH), working memory (RAM), and a rich set of peripheral blocks - timers, ADC, communication ports, and I/O - into one silicon die. MCUs sit below microprocessors in the computing hierarchy because they are self-contained, embedded, and typically run a single firmware image rather than a general-purpose operating system. The HCS12 specifically targets cost-sensitive, deterministic, real-time control tasks such as motor commutation, sensor fusion, and body-electronics modules. Key features of the MC9S12UF32PB include 41 user I/O pins, an internal oscillator that eliminates external crystal cost, and the established HCS12 peripheral set (including PWM, SCI/SPI, and timer modules per family documentation). It operates across the standard commercial temperature range, comes in a tray packaging format, and is supported by NXP's CodeWarrior and the open-source GCC toolchain. FLASH program memory is in-system programmable via the standard HCS12 BDM interface, enabling rapid prototype iteration and field firmware updates. Architecturally, the S12 core provides a 16-bit register file, 20-bit address space, and an interrupt controller optimized for fast deterministic response. Memory protection and on-chip debug enhance reliability, while the 32KB FLASH is segmented to support a small bootloader alongside application code. Compared with newer Cortex-M0+ MCUs, the HCS12 retains backward-compatibility for designs originally deployed across two decades, which is the primary reason it remains in long-life production. Typical applications include automotive body controllers, instrument cluster slaves, HVAC damper actuators, industrial sensor front-ends, and consumer appliance control boards. The wide temperature tolerance and proven HCS12 firmware ecosystem also make it suitable for retrofit designs migrating from older HC11/HCS12 derivatives. When designing with this device, ensure the BDM (background debug mode) pins are accessible for in-circuit programming and that the internal oscillator accuracy is sufficient for any UART-bound communications. For designs needing more memory, the UF32 part can typically be replaced by UF64 / UF128 variants sharing the same 64-LQFP footprint. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, giving engineers a one-stop procurement and engineering reference.

見積もり お問い合わせ
MC9S12UF32PU - 16-bit HCS12 MCU 32KB Flash USB 2.0 | NXP
MC9S12UF32PU

MC9S12UF32PU - 16-bit HCS12 MCU 32KB Flash USB 2.0 | NXP

The NXP MC9S12UF32PU is a 16-bit HCS12 microcontroller unit (MCU) built around an integrated USB 2.0 device controller, designed for memory card reader and ATA/ATAPI interface applications. The device integrates 32 KB of on-chip Flash memory (32K x 8), operates at a CPU clock of 30 MHz, and is housed in a 100-pin LQFP (14x14) package. According to DigiKey product listing data, this part is currently offered in active distribution and ships same-day from NXP USA Inc. inventory. Background: A microcontroller (MCU) is a single-chip computer that combines a CPU core, program memory (typically Flash), data memory (RAM), and a rich set of peripherals such as timers, ADC, communication interfaces (UART, SPI, I2C), and increasingly specialized blocks like USB controllers. The HCS12 is NXP's (formerly Freescale's) 16-bit CISC MCU family, descended from the Motorola HC11/HC12 architecture, designed for automotive and embedded control. Microcontrollers like the MC9S12UF32PU sit within the broader hierarchy of embedded processors -> microcontrollers -> 16-bit microcontrollers -> HCS12 family, and are widely used in place of larger 32-bit ARM Cortex-M parts when cost, simplicity, and deterministic 16-bit performance matter more than raw compute. Key features of the MC9S12UF32PU include integrated USB 2.0 full-speed device functionality, dedicated ATA/ATAPI host interface logic for connecting hard drives and optical storage, and 32 KB Flash for program storage. The 100-pin LQFP (14x14 mm) package gives the part generous I/O for storage peripherals, an MSC class-compliant mass-storage interface, and ample ground and supply pins for the mixed-signal USB PHY rails. The 30 MHz bus clock is generated from an internal PLL driven by an external resonator, while Flash-resident firmware handles the USB stack and ATA command set in firmware. Technically, the S12 core is a 16-bit accumulator-based CISC design with 20-bit ALU operations and a von Neumann bus architecture. The USB 2.0 device block is on-die and exposes the standard full-speed endpoint set, so designers do not need an external USB transceiver. The integrated ATA/ATAPI host block supports PIO modes commonly used by 2.5-inch hard drives and CD/DVD optical drives, making this MCU a one-chip solution for USB mass-storage enclosures, card readers, and external optical drives. Typical applications include USB memory card readers, USB-to-ATA bridge adapters for external HDD enclosures, USB-to-ATAPI optical drive controllers, digital photo frames, and industrial data-loggers with removable storage. When designing with the MC9S12UF32PU, follow the application note guidance for USB 2.0 PHY PCB layout - keep the D+/D- traces length-matched, as short as possible, and routed over a continuous ground plane. Use the manufacturer's recommended 22 ohm series termination and a common-mode choke on the USB DP/DN lines to pass USB compliance. This page synthesizes distributor pricing, drop-in alternatives from the same NXP S12 family, and practical design notes not found in the bare manufacturer datasheet.

見積もり お問い合わせ
MC9S12UF32PUE - 16-bit USB2.0 MCU, 30MHz, 32KB Flash | NXP
MC9S12UF32PUE

MC9S12UF32PUE - 16-bit USB2.0 MCU, 30MHz, 32KB Flash | NXP

The NXP MC9S12UF32PUE is a 16-bit HCS12 family microcontroller unit (MCU) with an integrated USB 2.0 full-speed device controller and ATA-5/CompactFlash/Secure Digital host interfaces, housed in a 100-pin LQFP (14x14) package. It operates at up to 30 MHz, integrates 32 KB of Flash EEPROM and 3.5 KB of RAM, and is specified for a 5V supply. The part is designed for USB mass-storage applications such as memory card readers, ATA/ATAPI bridges, and external storage devices. A microcontroller (MCU) is a single-chip computer that contains a CPU core, program memory, working RAM, and a set of on-chip peripherals. The HCS12 is a 16-bit CISC core that evolved from the original Motorola/Freescale HC11 architecture and is widely used in automotive body and chassis electronics as well as in industrial control. Microcontrollers such as the MC9S12UF32PUE sit at the lowest layer of embedded design hierarchy: MCU -> embedded processor -> semiconductor IC -> electronic component. Key features of the MC9S12UF32PUE include the integrated USB 2.0 device controller, native ATA-5 (ATAPI-6) interface for parallel hard drives, CompactFlash host controller, Secure Digital (SD) host controller, 32 KB of in-application-programmable Flash, 3.5 KB of RAM, an HCS12 16-bit CPU with up to 30 MHz bus, and a commercial temperature grade (0C to +70C per the PUE suffix). The 100-pin LQFP package exposes all peripheral buses and timers for external connections. The internal architecture pairs the HCS12 core with a unified peripheral bus, dedicated DMA for USB and ATA transfers, and dual timer modules (ECT and TIM/PWM), enabling high-throughput streaming between the USB device port and the storage media without CPU intervention. Typical applications include USB memory card readers, USB-to-ATA hard drive bridges, USB-to-CFIT / SD card readers, portable external storage enclosures, and consumer USB-storage appliances where a single-chip bridge simplifies the BOM. When designing with this part, allocate separate ground returns for the USB analog block and the digital logic, follow NXP application note layout recommendations, and verify the host-mode firmware supports the chosen card standard before committing to volume production. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving procurement engineers a single source for selection and qualification.

見積もり お問い合わせ
MC9S12XA256CAA - 16-bit HCS12X MCU, 256KB Flash, 80MHz | NXP
MC9S12XA256CAA

MC9S12XA256CAA - 16-bit HCS12X MCU, 256KB Flash, 80MHz | NXP

The NXP MC9S12XA256CAA is a 16-bit HCS12X-family microcontroller (MCU) operating at 80 MHz, integrating 256 KB of Flash program memory, in a 80-pin QFP (14x14 mm) package. The S12XA sub-family retains the cost-effective power profile, electromagnetic compatibility, and code-size efficiency of the original HCS12 line while adding an enhanced XGATE co-processor for offloading interrupt-driven tasks at up to 80 MHz. An HCS12X microcontroller is a 16-bit CISC MCU designed for automotive and industrial real-time control. HCS12X extends the original HCS12 with an XGATE peripheral co-processor, an enhanced 80 MHz bus, and richer peripheral integration. Within NXP's portfolio hierarchy, the MC9S12XA256CAA sits in the S12X → S12XA → XA256 sub-line, which is part of the broader 16-bit MCU → automotive microcontroller → embedded MCU family. Designers choose this category for deterministic interrupt latency, CAN/LIN/SPI connectivity, and EMC robustness demanded by body and chassis ECUs. Key features include 256 KB (256K x 8) Flash program memory, 16 KB RAM, 4 KB EEPROM, 8 channels of 10-bit ADC, an enhanced XGATE co-processor, and 59 general-purpose I/O lines. Peripherals include LVD, POR, PWM, WDT, SCI, SPI, I2C, IrDA, and LINbus. Connectivity covers EBI/EMI plus those serial channels, supporting both body-controller networking and sensor-actuator front-ends. The 80 MHz bus (40 MHz core / 80 MHz XGATE) doubles throughput vs. legacy HCS12. Architecturally, the MC9S12XA256CAA pairs a CISC HCS12X core with an XGATE RISC-like co-processor that handles virtual DMA-style peripheral servicing, freeing the main CPU for application code. The 2.5 V/5 V supply, on-chip EEPROM, and integrated PWM make it a strong fit for motor-control and body-electronics modules. Typical applications include automotive body controllers, instrument clusters, HVAC control modules, industrial PLC I/O expansion, and CAN/LIN gateway nodes. Automotive grade suitability is reflected in the 80-pin QFP's automotive temperature support. When designing with this MCU, ensure decoupling with 100 nF ceramics near each VDD pin and follow NXP's reference layout for the QFP-80 thermal pad. Consider XGATE firmware partitioning to maximize bus offload and reduce main-core interrupt load.

見積もり お問い合わせ
MC9S12XA256CAAR - 16-bit 256KB Flash MCU 80MHz | NXP
MC9S12XA256CAAR

MC9S12XA256CAAR - 16-bit 256KB Flash MCU 80MHz | NXP

The NXP Semiconductors MC9S12XA256CAAR is a 16-bit HCS12X family microcontroller with 256 KB of embedded Flash, 16 KB of RAM, 4 KB of EEPROM, and an enhanced XGATE co-processor, operating at up to 80 MHz bus speed, housed in an 80-pin LQFP (14x14 mm) package. It provides 59 general-purpose I/O pins and integrates rich connectivity including CAN, I2C, IrDA, LINbus, SCI, and SPI peripherals. An MCU (microcontroller unit) is a single-chip computer that combines a CPU core, non-volatile program memory (Flash), volatile working memory (RAM), and on-chip peripherals such as ADCs, timers, and communication interfaces. The HCS12X is a 16-bit CISC architecture MCU family used widely in automotive body, chassis, and industrial control. Within the broader taxonomy, MC9S12XA256CAAR belongs to: microcontroller -> 16-bit MCU -> HCS12X family -> automotive/industrial MCU -> embedded system. Key features of this part include 80 MHz maximum CPU frequency, 8-channel 10-bit ADC, multiple PWM channels for motor and power control, low-voltage detection (LVD), power-on reset (POR), and a window watchdog timer (WDT). The integrated XGATE co-processor offloads interrupt-driven tasks from the main CPU, boosting real-time throughput for CAN/LIN message handling and I/O processing. Operating voltage is 2.5 V core supply. Technical depth: the HCS12X core uses a 16-bit CISC instruction set with enhanced indexing and page-switching for >64 KB code spaces. The XGATE is an independent RISC-style peripheral co-processor that runs while the main core is halted, enabling deterministic interrupt latencies in the low microsecond range. The 80-QFP (14x14 mm) LQFP package provides ample PCB routing area and supports hand-soldering and rework, preferred for low-to-medium volume automotive ECUs. Typical applications include automotive body controllers, CAN/LIN gateway nodes, industrial PLC I/O modules, HVAC control boards, sensor fusion front-ends, and small motor-control BLDC drivers. The combination of 256 KB Flash and the XGATE co-processor makes it a workhorse for chassis and body domain ECUs that require deterministic communication. When designing with this part, observe the 2.5 V core supply requirement and provide adequate decoupling (>=10 uF bulk + 100 nF per VDD pin pair). The XGATE firmware must be linked into the Flash image; designers should consult the S12XD/XB/XA reference manual for the memory map and interrupt vector table before porting code. This page synthesizes distributor pricing, lifecycle status, drop-in compatible alternatives from the HCS12X family, and practical engineering notes that are not gathered in one place on the manufacturer datasheet.

見積もり お問い合わせ
MC9S12XA256CAG - 16-Bit 256KB Flash HCS12X MCU | NXP
MC9S12XA256CAG

MC9S12XA256CAG - 16-Bit 256KB Flash HCS12X MCU | NXP

The NXP MC9S12XA256CAG is a 16-bit HCS12X microcontroller from the S12XA family, featuring 256KB of Flash program memory, 80 MHz CPU clock, and a 144-pin LQFP package (20x20 mm) operating across -40C to +85C. It belongs to the HCS12X core lineage and delivers 2x to 5x the performance of a 25 MHz HCS12 while retaining pin and code compatibility with legacy HCS12 designs, making it a drop-in migration path for cost-sensitive automotive and industrial platforms. A microcontroller is a single-chip computer containing a CPU core, program and data memory, and integrated peripherals such as timers, ADC, communication interfaces, and GPIO. HCS12X is an enhanced superset of the original HCS12, adding an XGATE co-processor for I/O servicing in higher-end members, increasing the bus width and extending the interrupt handling. Within the broader taxonomy, HCS12X MCUs sit under 16-bit microcontrollers -> automotive/industrial microcontrollers -> embedded processors -> semiconductors. They typically serve as the central ECU controller in body electronics, instrument clusters, and chassis subsystems where deterministic real-time behaviour, low EMI, and code efficiency matter more than raw MHz. The S12XA family specifically targets the 256KB-Flash tier, balancing memory capacity, peripheral count, and cost. Key features of the MC9S12XA256CAG include 256KB on-chip Flash (256K x 8), 119 GPIO pins, and a rich peripheral set: EBI/EMI external bus, I2C, IrDA, LINbus, SCI, SPI, PWM, plus LVD (low-voltage detect), POR (power-on reset), and WDT (watchdog timer). The integrated peripherals reduce external component count, which improves EMI signature and PCB simplicity, while 119 I/O paths support keypad scanning, segment LCD driving, sensor multiplexing and actuator H-bridge PWM without referencing a companion transponder. The HCS12X architecture combines the standard S12 CPU with up to 20-bit address space and 80 MHz operation, plus an enhanced interrupt controller and background debug mode (BDM) for in-circuit programming and real-time debug. The 256KB Flash is organised as 256K x 8, supporting in-application reprogramming via the standard S12 Flash routine interface, with optional security bits and EEPROM emulation through Flash partitioning. Typical applications for the MC9S12XA256CAG include automotive body controllers, instrument clusters, HVAC control modules, door modules with LIN nodes, and industrial PLC/HVAC control. Its wide temperature range and LIN/SPI/CAN-friendly peripheral set make it well-suited to chassis network and 12 V DC environment common in vehicle ECUs. Designers should budget for BDM header access during development and follow NXP EMC guidelines for the 144-LQFP PCB layout to maintain EMI performance. This page synthesises distributor pricing, lifecycle signals, and drop-in alternatives for the MC9S12XA256CAG that are not consolidated in any single manufacturer page.

見積もり お問い合わせ
MC9S12XA256CAL - 16-bit 80MHz 256KB Flash MCU | NXP
MC9S12XA256CAL

MC9S12XA256CAL - 16-bit 80MHz 256KB Flash MCU | NXP

The NXP Semiconductors MC9S12XA256CAL is a 16-bit HCS12X (S12XA) microcontroller with 256KB of Flash program memory, an 80MHz bus-capable core, and a 112-pin LQFP (20x20 mm) surface-mount package. It also integrates 16KB of RAM-type memory per distributor listings and a 10-bit ADC, operating from a 2.35V to 5.5V supply range. A 16-bit microcontroller is a single-chip computing device whose data bus width is 16 bits, positioned in the hierarchy of embedded processors between 8-bit MCUs (such as the HCS08) and 32-bit MCUs. NXP's S12X family descends from the Freescale HCS12 (S12) architecture, adding an enhanced HCS12X core with an XGATE co-processor concept family lineage and delivering two to five times the performance of a 25 MHz HCS12 device while retaining a high degree of pin and code compatibility with the older HCS12 family. Key features of the MC9S12XA256CAL include 256KB (256K x 8) of on-chip Flash for code and data storage, an 80MHz maximum clock speed achieved via an internal phase-locked loop, 59 I/O lines for board-level control, a 10-bit ADC for analog sensing, and the cost-effective power consumption, electromagnetic compatibility, and code-size efficiency advantages characteristic of the S12X family. Architecturally, the S12XA is a CISC-based 16-bit core optimized for low interrupt latency and deterministic real-time behavior, traits valued in body electronics, instrumentation, and industrial control. The wide 2.35V to 5.5V operating window allows direct operation from automotive-grade 5V rails while supporting lower-voltage designs. The LQFP 20x20 mm gull-wing package supports standard surface-mount assembly and reflow soldering. Typical applications include automotive body modules (door, seat, lighting control), industrial automation controllers, motor control and HVAC systems, and instrumentation panels that need moderate Flash density and robust I/O without the complexity of a 32-bit platform. A key design consideration: this part is listed by NXP as NRND (Not Recommended for New Designs), so new designs should evaluate newer S12XE/S12XS family members such as the S912XET512 series, while the MC9S12XA256CAL remains suitable for sustaining existing production. This page synthesizes distributor pricing, verified drop-in alternatives, and practical design notes not found in the manufacturer product page.

見積もり お問い合わせ
MC9S12XA512CAA - 16-bit 80MHz HCS12X 512KB Flash MCU | NXP
MC9S12XA512CAA

MC9S12XA512CAA - 16-bit 80MHz HCS12X 512KB Flash MCU | NXP

The NXP Semiconductors (formerly Freescale) MC9S12XA512CAA is a 16-bit HCS12X microcontroller IC delivering 80 MHz CPU performance with 512 KB on-chip Flash memory in a 80-pin QFP (14x14 mm) package. The device targets automotive and industrial embedded designs that need CAN connectivity, large memory, and code compatibility with the legacy HCS12 family while gaining two-to-five times the performance of a 25 MHz HCS12. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, volatile and non-volatile memory, peripherals, and I/O on one die. The MC9S12XA512CAA belongs to the HCS12X family, which sits within the broader S12X architecture (a superset of the legacy HCS12 CISC core). The S12X platform preserves pin and code compatibility with HCS12 while adding XGATE co-processors and richer peripherals, enabling drop-in upgrades for legacy HCS12 designs. Within the MCU taxonomy: microcontroller -> 16-bit MCU -> HCS12X family -> automotive-grade embedded MCU -> semiconductor IC. Key features include 512 KB (512K x 8) Flash, 32 KB RAM, 4 KB EEPROM, and a 10-bit ADC with multiple input channels. The device supports CAN, SPI, I2C, SCI/UART, and other serial interfaces. With 59 I/O ports and an operating temperature range covering industrial and automotive use, it fits a wide variety of in-vehicle and industrial embedded applications. The MC9S12XA512CAA is built on a CISC architecture that retains code efficiency and EMC advantages of the HCS12 platform. The 80 MHz bus delivers roughly two-to-five times the throughput of the original 25 MHz HCS12, and on-chip integrated peripherals reduce external component count and BOM cost. The wide 2.5V-5V I/O supply range with internal voltage regulator supports both 5V and 3.3V system designs. Typical applications include automotive body controllers, instrument clusters, HVAC controllers, industrial automation and motor control, and CAN-connected sensor nodes. Automotive grade qualifies the part for under-the-hood or cabin ECUs requiring reliable operation across temperature extremes. One design consideration: provide robust decoupling on VDDR/VSS and MCU supplies, follow NXP guidelines for BDM debugging header, and ensure unused pins are configured appropriately to avoid parasitic current paths during stop or wait modes.

見積もり お問い合わせ
MC9S12XA512CAL - 16-bit 80MHz 512KB Flash HCS12X MCU | NXP
MC9S12XA512CAL

MC9S12XA512CAL - 16-bit 80MHz 512KB Flash HCS12X MCU | NXP

The NXP MC9S12XA512CAL is a 16-bit HCS12X-family microcontroller running at 80 MHz with 512 KB of on-chip Flash, packaged in a 112-pin LQFP (20x20 mm). It is positioned for cost-sensitive automotive and industrial embedded applications requiring CISC architecture, large Flash, and rich peripheral integration. The device is marked NRND (Not Recommended for New Designs) on the NXP product page. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and peripheral interfaces (timers, ADC, communication controllers) into one package. The S12X family is built on the enhanced HCS12X CISC core, which retains code compatibility with the legacy HCS12 family while adding an XGATE co-processor and wider bus paths for higher throughput. MCUs in this category sit at the bottom of the embedded-computing hierarchy: microcontroller -> embedded processor -> integrated circuit -> semiconductor. Key features of the MC9S12XA512CAL include 512 KB Flash, 32 KB RAM, 4 KB EEPROM, an 80 MHz maximum CPU frequency (with a 40 MHz internal bus), and up to 91 general-purpose I/O lines. Peripheral blocks include a 16-channel 10-bit ADC, multiple CAN (MSCAN) controllers, SCI/SPI/IIC serial interfaces, PWM timers, and an XGATE co-processor for offloading interrupt-driven tasks from the main CPU. The S12X architecture uses a 16-bit CISC instruction set with enhanced addressing modes and a hardware multiplier/divider, giving two to five times the performance of the original 25 MHz HCS12 while keeping pin and code compatibility. The XGATE peripheral runs on the peripheral bus and can service high-speed interrupts and DMA-like data movement without waking the main CPU, which is valuable in CAN, LIN, and PWM-heavy automotive body and chassis applications. Typical applications include automotive body control modules, industrial CAN nodes, motor control (BLDC and stepper) front-ends, HVAC controllers, instrument clusters, and sensor-fusion ECUs. The wide operating voltage (2.5 V / 5 V tolerant) and industrial temperature grade make it a common choice for 12 V automotive environments. When designing with this device, note that the part is in NRND status, so production plans should evaluate NXP's recommended successors or long-term stock. Use NXP's CodeWarrior or S32 Design Studio toolchains and verify peripheral mapping against the device-specific reference manual before committing to the design. This page synthesizes distributor pricing, drop-in compatible S12X-family alternatives, and practical design notes not found in the manufacturer datasheet alone, providing information gain beyond what DigiKey or Mouser product pages offer.

見積もり お問い合わせ
MC9S12XA512CFV - 16-Bit HCS12X MCU 512KB Flash 40MHz | NXP
MC9S12XA512CFV

MC9S12XA512CFV - 16-Bit HCS12X MCU 512KB Flash 40MHz | NXP

The NXP MC9S12XA512CFV is a 16-bit HCS12X microcontroller featuring 512KB (512K x 8) Flash memory, 40MHz CPU12 core, and a 144-pin LQFP (LFQFP) industrial-temperature-grade package. The 'CFV' suffix indicates an LFQFP-144 gull-wing package, square body 20x20mm, suitable for surface-mount automotive and industrial controller boards. It belongs to the S12XA family of HCS12X devices that share a common peripheral set with the S12XD and S12XB families, simplifying software portability. A microcontroller (MCU) is an integrated circuit containing a processor core, program memory, data memory, and programmable I/O peripherals on one chip. HCS12X microcontrollers extend the original HC12 architecture with a hardware XGATE coprocessor for DMA-style peripheral servicing, freeing the main CPU12 core from interrupt overhead. This positions the S12XA family in the broader hierarchy of embedded MCUs that include 8-bit (HC08/HC9S08), 16-bit (HCS12/HCS12X), and 32-bit (Kinetis/S12Z) architectures. The 'X' variants target applications that demand deterministic real-time response, such as automotive body and chassis control. Key features of the MC9S12XA512CFV include 512KB on-chip Flash, up to 32KB RAM, multiple CAN 2.0 interfaces (msCAN), SPI/SCI/UART communication, a 16-channel 10-bit ADC, an 8-channel PWM, and enhanced capture/timer modules. The XGATE coprocessor can offload peripheral servicing routines, enabling faster interrupt response and more deterministic behavior under heavy event loads. The CPU12 core executes instructions at 40MHz and is fully upward-compatible with legacy HC12 code, supporting both Big-Byte and Small-Byte memory models. The device operates from a 3.15V to 5.5V single supply and is rated for the industrial temperature range (-40C to +85C). Built-in features include a low-voltage reset (LVR), a windowed watchdog timer, a real-time interrupt (RTI), and an internal PLL for system clock generation. The XGATE coprocessor shares peripheral bus access with the CPU12, allowing DMA-like transfers between peripherals and RAM without CPU intervention. This architecture is commonly used to implement CAN message gateways, complex PWM sequences, and high-rate sampling loops that exceed the throughput achievable by CPU12 alone. Typical applications include automotive body control modules (BCMs), CAN gateway controllers, HVAC control units, instrument cluster MCUs, industrial CAN nodes, and LIN master controllers. Designers commonly choose the S12XA family for systems that need deterministic CAN/LIN throughput while preserving HC12 instruction set compatibility for legacy firmware reuse. When designing with this MCU, allocate careful attention to decoupling capacitor placement near each VDD/VSS pair and follow the datasheet reference layout for the LFQFP-144 footprint. The 144-pin package provides generous I/O counts but requires a 4-layer PCB with controlled impedance for noise-sensitive analog inputs. This page consolidates distributor pricing, pin-to-pin same-family drop-in alternatives, and practical design notes that extend the manufacturer datasheet with sourcing-side information.

見積もり お問い合わせ
MC9S12XA512VAL - 16-bit 512KB Flash HCS12X MCU | NXP | 112-LQFP
MC9S12XA512VAL

MC9S12XA512VAL - 16-bit 512KB Flash HCS12X MCU | NXP | 112-LQFP

The NXP (formerly Freescale) MC9S12XA512VAL is a 16-bit HCS12X-family microcontroller with 512 KB of on-chip Flash and 32 KB of RAM, packaged in a 112-pin LQFP (20x20 mm) for surface-mount automotive and industrial designs. The part runs the HCS12X CPU core at up to 80 MHz, integrates an Enhanced XGATE co-processor for peripheral offload, and exposes 91 general-purpose I/O lines with a rich peripheral set. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, volatile and non-volatile memory, peripherals, and I/O onto one silicon die. The HCS12X sits at the top of the Freescale/NXP HCS12 16-bit family and adds an Enhanced XGATE RISC co-processor and a peripheral co-processor bus. It belongs to the broader product hierarchy of microcontroller -> embedded MCU -> 16-bit MCU -> automotive MCU -> semiconductor IC. Key features include 512 KB Flash (512K x 8), 32 KB RAM, an 80 MHz CPU clock, EBI/EMI expansion, I2C, IrDA, LINbus, SCI, SPI connectivity, and on-chip peripherals such as LVD, POR, PWM, and a watchdog timer. The 112-LQFP package exposes 91 I/O pins and operates from a 2.5 V supply, which is typical for HCS12X-family members. The HCS12X architecture pairs the main S12X CPU with the XGATE co-processor, allowing deterministic interrupt servicing and high-throughput peripheral DMA without taxing the main core. The 512 KB Flash is organized as 512K x 8, giving ample headroom for full automotive software stacks (OSEK/VDX, AUTOSAR) and large protocol libraries. The integrated PWM and timer modules are tuned for motor and power-conversion control. Typical applications include automotive body controllers, chassis ECUs, instrument clusters, industrial motor drives, and CAN/LIN gateways. The wide peripheral set (CAN via SCI/SPI bridges, LINbus, PWM) targets vehicle network nodes where the XGATE handles bus traffic in parallel with the CPU running application logic. When designing with the MC9S12XA512VAL, pay attention to the 2.5 V core supply requirement (typical of HCS12X) and ensure the BGND/RESET decoupling network follows the NXP reference design. Also confirm the part's lifecycle status before committing to new designs. This page synthesizes distributor pricing, drop-in HCS12X alternatives from the same family, and practical design notes that the manufacturer datasheet alone does not provide.

見積もり お問い合わせ
MC9S12XD128MAL - 16-Bit 80MHz 128KB Flash S12X MCU | NXP | 112-LQFP
MC9S12XD128MAL

MC9S12XD128MAL - 16-Bit 80MHz 128KB Flash S12X MCU | NXP | 112-LQFP

The NXP MC9S12XD128MAL is a 16-bit HCS12X microcontroller delivering 32-bit-class performance with 16-bit code efficiency, 128KB of on-chip Flash, 12KB RAM, and 80 MHz CPU clock in a 112-pin LQFP (20x20 mm) package. Targeted at automotive multiplexing applications, the S12XD family integrates a peripheral co-processor (XGATE) for offloading interrupt-driven tasks and an enhanced indexed addressing mode that preserves HCS12 source-code compatibility while extending the instruction set. An MCU (Microcontroller Unit) is a single-chip computer that integrates a CPU core, program and data memory, and a configurable set of peripherals such as timers, ADC, communication controllers, and GPIO. Within the broader hierarchy, MCUs are a sub-category of microprocessors and a foundational class of embedded computing devices. The HCS12X architecture specifically layers a co-processor and instruction-queue extensions on top of the established HCS12 CPU, enabling higher interrupt throughput and DMA-like transfers without burdening the main core. Key features include an enhanced XGATE co-processor for deterministic interrupt processing, a 10-bit successive-approximation ADC, multiple CAN 2.0 controllers (msCAN), SCI, SPI, I2C, PWM, 16-bit timers, and on-chip voltage regulator supporting 3.3V/5V operation. The part ships in a 112-LQFP industrial-grade package rated -40C to +125C junction, qualified per automotive reliability expectations and widely deployed in body-electronics modules. The S12XD family is architected around the XGATE co-processor that executes RISC-like instructions from a separate memory space, allowing the main CPU to focus on application logic while the co-processor handles serial-protocol framing, peripheral event servicing, and real-time data routing. This dual-core model is unusual in 16-bit microcontrollers and explains the family's long service life in automotive networks. Typical applications include automotive body controllers, CAN/LIN gateway nodes, instrument clusters, HVAC modules, and industrial sensor nodes where deterministic serial-bus handling is required. The device is also widely used in automotive multiplexing networks and motor-control subsystems that benefit from the co-processor's real-time data-handling capability. When designing with this part, verify peripheral availability against your software framework's device header - the S12X family has multiple Flash densities and peripheral mixes, so the derivative chosen determines exact module count. Plan for an external CAN transceiver (such as TJA1050) since the on-chip msCAN module only provides the protocol layer. This page synthesizes distributor pricing, verified drop-in alternatives, and design notes sourced from the manufacturer datasheet and the cross-reference data presented alongside this part, offering a consolidated view not available on any single distributor page.

見積もり お問い合わせ
MC9S12XD256CAL - 16-bit 80MHz 256KB Flash MCU | NXP | Automotive
MC9S12XD256CAL

MC9S12XD256CAL - 16-bit 80MHz 256KB Flash MCU | NXP | Automotive

The NXP (Freescale) MC9S12XD256CAL is a 16-bit HCS12X automotive microcontroller running at 80 MHz bus frequency with 256 KB of on-chip flash memory and 12 KB of RAM, housed in a 112-pin LQFP (20x20 mm) surface-mount package. It is AEC-Q100 qualified for automotive applications. A microcontroller unit (MCU) is a single integrated circuit that combines a processor core, memory, and programmable peripherals into one chip, forming the lowest programmable layer of the embedded systems hierarchy: MCU -> embedded processor -> microprocessor -> semiconductor device. The HCS12X family is NXP's enhanced 16-bit CISC architecture, upward compatible with the earlier HCS12 (S12) instruction set, so existing HCS12 firmware migrates with minimal changes. Key features of the MC9S12XD256CAL include the HCS12X CPU with instruction queue and enhanced indexed addressing, 256 KB (256K x 8) flash program memory, a phase-locked loop (PLL)-based clock and reset generator (CRG) that multiplies an external crystal up to the 80 MHz bus rate, multiple serial communication interfaces (SCI, SPI), a controller area network (CAN) module for vehicle networks, and an analog-to-digital converter. The device operates from a 5 V supply with a 2.5 V regulated core, a combination typical of the S12XD family. The XGATE co-processor architecture of the S12XD generation offloads interrupt handling and communication tasks from the main CPU, effectively providing an additional 100 MIPS of concurrent processing throughput for protocol stacks and I/O management. Typical applications include automotive body control modules, HVAC controllers, dashboard and instrument clusters, gateways between CAN networks, and industrial control systems that benefit from the robust 5 V noise immunity and CAN connectivity. Design consideration: because the part is listed NRND (Not Recommended for New Designs) on the NXP product page, new designs should evaluate the S12XE or MagniV families, while existing designs can continue sourcing through authorized excess-stock channels. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not consolidated in the manufacturer datasheet.

見積もり お問い合わせ
MC9S12XD256MAA - 16-bit HCS12X MCU 256KB Flash 80MHz | NXP
MC9S12XD256MAA

MC9S12XD256MAA - 16-bit HCS12X MCU 256KB Flash 80MHz | NXP

The NXP MC9S12XD256MAA is a 16-bit microcontroller from the S12XD family, built on the enhanced HCS12X CPU core with XGATE co-processor, delivering up to 80 MHz core speed in an 80-pin PQFP (QFP 14x14 mm) package. It integrates 256 KB of on-chip Flash program memory, 14 KB of RAM, and 4 KB of EEPROM, providing automotive-grade CISC performance with instruction-set and programmer-model compatibility to the legacy HCS12 line. The XGATE peripheral co-processor offloads interrupt-driven tasks and provides an additional 80 MHz execution thread, doubling effective throughput for I/O-intensive firmware stacks. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and interrupt logic onto one silicon die. Within the broader taxonomy, the MC9S12XD256MAA belongs to the 16-bit CISC MCU category, the HCS12X family, and ultimately the NXP/Freescale S12XD automotive-grade controller lineup. CISC (Complex Instruction Set Computer) architectures trade instruction-density for code size efficiency, which is advantageous in ROM/Flash-constrained automotive modules. The MC9S12XD256MAA features 59 general-purpose I/O pins and an extensive peripheral set including up to 8-channel 10-bit ADC, PWM outputs, an Enhanced Capture Timer, multiple serial interfaces (SCI, SPI, I²C), CAN 2.0 A/B controllers, and an on-chip voltage regulator that supports both 2.5 V and 5 V operation. The integrated low-voltage detector (LVD) and power-on reset (POR) circuits simplify brown-out handling. Upward instruction-set compatibility with the HCS12 family preserves code investment for migrations from older S12 designs. Operating from a single 2.5 V or 5 V supply, the device includes built-in CANbus, SCI, SPI, I²C, IrDA, and LINbus connectivity blocks, making it suited for in-vehicle networking nodes such as body controllers, gateway modules, and industrial CAN nodes. The XGATE co-processor at 80 MHz handles DMA-style peripheral servicing without CPU intervention, improving determinism on high-event-rate CAN traffic. Typical applications include automotive body control modules, instrument clusters, HVAC controllers, industrial CAN-based sensor nodes, and embedded CAN gateways. The wide operating temperature range and AEC-Q100 qualification suit under-hood and cabin-mounted automotive ECUs. When designing, place bulk decoupling within 25 mm of the VDD pins and keep the oscillator traces short; the XGATE programming model requires synchronization with HCS12X global memory for shared-variable access. This page consolidates distributor pricing, verified drop-in alternatives, and design notes beyond what is published in the manufacturer datasheet.

見積もり お問い合わせ
MC9S12XD256MAG - 16-Bit HCS12X 80MHz 256KB Flash MCU | NXP
MC9S12XD256MAG

MC9S12XD256MAG - 16-Bit HCS12X 80MHz 256KB Flash MCU | NXP

The NXP MC9S12XD256MAG is a 16-bit HCS12X family microcontroller featuring an 80 MHz CPU core, 256 KB of on-chip Flash, and a 144-pin LQFP package. According to the NXP product brief, the device integrates the HCS12X CPU with enhanced indexed addressing, an instruction queue, and a richer instruction set, all while remaining upward-compatible with the legacy HCS12 instruction set. Background: HCS12X is NXP's (formerly Freescale) 16-bit microcontroller architecture, evolved from the HCS12 CISC core. It targets automotive body, chassis, and powertrain applications as well as industrial control. The S12XD sub-family adds the XGATE coprocessor for high-bandwidth peripheral servicing and deterministic interrupt response, and shares its peripheral set, programmer's model, and interrupt stacking with HCS12, simplifying migration of legacy HCS12 code bases. Key features of the MC9S12XD256MAG include 256 KB (256K x 8) of Flash program memory, 12 KB of RAM, 4 KB of EEPROM, an 80 MHz bus-rated CPU with a 25 MHz bus clock typical, dual CAN (msCAN) controllers, multiple SCI/SPI/PWM/IIC peripherals, an 8-channel 10-bit ADC, and an operating voltage range of 2.5 V/5 V that suits automotive 5 V rails. Technically, the HCS12X core pairs the main CPU with the XGATE peripheral coprocessor for time-critical I/O offload, allowing interrupt latency below 1 us in many configurations. The 144-LQFP package exposes up to four 8-bit Ports (PJ-PK and PT) plus additional PAD/ADDR/DATA buses that allow external memory expansion. Typical applications include automotive body control modules, industrial PLCs, HVAC controllers, sensor fusion front-ends, and CAN gateway nodes where the dual msCAN modules and large Flash footprint are decisive. Design consideration: PCB designers should leave generous copper pour under the exposed thermal pad of the 144-LQFP and keep the analog AVREF/VDDA traces short and decoupled to maximise ADC performance; the HCS12X background-debug-mode (BDM) interface should remain accessible for in-circuit debug. This page synthesises distributor pricing, same-family LQFP alternatives, and practical design notes not collected on the manufacturer product page.

見積もり お問い合わせ
MC9S12XD256MAL - 16-bit 256KB Flash HCS12X MCU 112-LQFP | NXP
MC9S12XD256MAL

MC9S12XD256MAL - 16-bit 256KB Flash HCS12X MCU 112-LQFP | NXP

The NXP MC9S12XD256MAL is a 16-bit HCS12X microcontroller with 256KB Flash, 80MHz CPU, 112-LQFP (20x20mm) package. It features an XGATE co-processor (200MHz equivalent), 12KB RAM, 4KB EEPROM, and 119 I/O ports. An HCS12X MCU is a 16-bit CISC microcontroller that extends the classic HCS12 architecture with an XGATE auxiliary co-processor for high-bandwidth peripheral handling. It belongs to the automotive/industrial MCU family within the broader microcontroller hierarchy: MCU -> embedded processor -> semiconductor. HCS12X parts are upward-compatible with the HCS12 instruction set while adding enhanced indexed addressing, an instruction queue, and interrupt stacking that matches the HCS12 programmer's model. According to the NXP product page, the device targets automotive body and chassis applications as well as industrial control systems requiring deterministic real-time response. Key features include 80MHz CPU clock, 256KB on-chip Flash, 4KB EEPROM for data retention, 12KB SRAM, five CAN modules (msCAN), an 8-channel 16-bit timer, 8-channel PWM, two SPI, two I2C, and three SCI/UART interfaces. The integrated 16-channel 12-bit ADC with 2.5 µs conversion supports analog sensor reading common in automotive ECUs. The MC9S12XD256MAL uses Freescale/NXP's 0.18 µm embedded Flash process with on-chip voltage regulator for single 5V supply operation. The XGATE RISC co-processor offloads interrupt-driven peripheral servicing, freeing the main CPU for computation tasks. The device includes background debug mode (BDM) and a standard JTAG interface for in-circuit emulation. Typical applications include automotive body controllers, instrument clusters, HVAC controllers, and industrial automation controllers. A common use case is motor-driven HVAC flap control with CAN-based diagnostic reporting, where deterministic interrupt response and multi-channel ADC are essential. For new designs, evaluate whether the S12XE or S12XHY family members, with their enhanced XGATE and higher density RAM/Flash, offer cost advantages over the S12XD. Where ISO 26262 functional-safety compliance is required, the S12XFE or Cortex-M based parts must be considered instead. This page synthesizes distributor pricing, drop-in alternatives, and design notes drawn from NXP application notes that the manufacturer's product page does not consolidate in one place.

見積もり お問い合わせ
MC9S12XD256VAA - 80MHz 256KB Flash 80-QFP MCU | NXP
MC9S12XD256VAA

MC9S12XD256VAA - 80MHz 256KB Flash 80-QFP MCU | NXP

The NXP MC9S12XD256VAA is a 16-bit HCS12X microcontroller operating at up to 80 MHz, with 256 KB of flash memory and an 80-QFP package measuring 14 x 14 mm. It combines a 32-bit HCS12X core architecture with embedded control peripherals for industrial and automotive-oriented embedded systems. A microcontroller is a programmable semiconductor device that integrates a processor core, memory, and peripherals such as timers, communications controllers, analog interfaces, and interrupt logic. The HCS12X family extends the HCS12 instruction set with enhanced addressing and an improved execution core, making MC9S12XD256VAA suitable for real-time control systems that require deterministic peripheral access and substantial embedded flash. Verified distributor information identifies a 256 KB flash configuration, 80 MHz operating speed, 16-bit HCS12X classification, and an 80-QFP package. Additional search data reports 14 KB of RAM, 119 I/O ports, and a 2.35 V to 2.75 V core-supply range for related indexed records, although those details should be confirmed against the exact NXP datasheet before design release. The device can serve as the central controller in industrial automation, automotive body electronics, motor control, communications gateways, and embedded instrumentation. Its 256 KB program memory accommodates larger control applications than many small 8-bit MCUs while retaining a mature real-time architecture. The 80 MHz core can execute control logic and service multiple peripherals, but final firmware performance depends on the selected clock configuration, memory wait states, peripherals, and toolchain settings. The 80-QFP footprint requires careful PCB layout and thermal management. Designers should follow the manufacturer package drawings for pad dimensions, pin numbering, exposed-pad requirements, and recommended land patterns. Because the supplied data does not provide a complete verified pinout, thermal resistance, or operating-temperature range, those values are intentionally marked for validation rather than guessed. This product page combines verified distributor specifications, package information, sourcing context, and application guidance. It does not substitute for the NXP datasheet, reference manual, errata, or device-specific qualification documents when those documents are required for a production design.

見積もり お問い合わせ
MC9S12XD256VPV - 16-Bit HCS12X MCU 256KB Flash LQFP-112 | NXP
MC9S12XD256VPV

MC9S12XD256VPV - 16-Bit HCS12X MCU 256KB Flash LQFP-112 | NXP

The NXP (formerly Freescale) MC9S12XD256VPV is a 16-bit HCS12X microcontroller with 256 KB of on-chip Flash, 16 KB RAM and 4 KB EEPROM, packaged in a 112-pin LQFP (20x20 mm). It runs an enhanced HCS12X CPU core at up to 80 MHz bus clock with 32-bit internal arithmetic extensions for automotive body and chassis applications. A microcontroller (MCU) is a single-chip computer integrating a CPU, memory (Flash/RAM/EEPROM), and a rich set of peripherals such as timers, ADC, PWM, CAN and SCI/UART/SPI/I2C. The HCS12X family extends the legacy 16-bit HCS12 with an XGATE co-processor and increased performance, sitting between classic 8-bit MCUs (e.g. HC08, S08) and higher-end 32-bit Power Architecture parts like the MPC56xx and Kinetis families in NXP's automotive hierarchy. The 'XD' derivative in particular doubles the XGATE channels to 80 and is widely adopted for body controllers, gateway nodes and industrial motion control. Key features include 256 KB Flash with security, 16 KB RAM, 4 KB EEPROM, an XGATE co-processor delivering up to 80 MIPS of offloaded DSP-style I/O processing, dual CAN 2.0A/B controllers, an enhanced capture timer with 8 channels + 8 PWM, 16-channel 10-bit ADC, 8-channel 8-bit PWM and SCI/SPI/I2C interfaces. The part supports industrial-grade -40C to +85C operation and is well-suited to body electronics, instrument clusters, and LIN/CAN sub-nodes. Typical applications include automotive body control modules, HVAC controllers, instrument cluster slaves, industrial CAN nodes, sensor interfaces and lighting/ECM controllers. Two independent CAN channels plus the XGATE co-processor make the XD256 particularly strong in gateway and network-bridging roles. When designing with this MCU, ensure the BDM/debug pins are correctly pulled and that VDDR/VSS pair decoupling follows the datasheet reference layout. For low-EMI automotive layouts, place the 4 MHz crystal or resonator within 1 cm of the EXTAL/XTAL pins, and route the XCLKS/OCT route guarded by ground. This page consolidates real-time distributor pricing, drop-in LQFP-112 alternatives, and engineering design notes not present in the manufacturer datasheet, providing an at-a-glance decision support layer for procurement and design engineers.

見積もり お問い合わせ
MC9S12XD64CAA - 16-bit 80MHz S12X MCU, 64KB Flash | NXP
MC9S12XD64CAA

MC9S12XD64CAA - 16-bit 80MHz S12X MCU, 64KB Flash | NXP

The NXP MC9S12XD64CAA is a 16-bit HCS12X microcontroller (MCU) delivering up to 80 MHz core clock, 64 KB of on-chip Flash, 4 KB of RAM, and 1 KB of EEPROM, housed in an 80-pin QFP (PQFP) surface-mount package. According to DigiKey product page 1791379, the device integrates an 8-channel 10-bit ADC and exposes up to 59 general-purpose I/O pins, targeting cost-sensitive automotive and industrial embedded systems. The HCS12X core extends the legacy HCS12 instruction set with an instruction queue, enhanced indexed addressing, and an extended instruction set while preserving the HCS12 programmer's model and interrupt stacking for software reuse. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash), working memory (RAM), and peripheral interfaces (ADC, communication controllers, GPIO) into one package. Within the embedded hierarchy it sits at the node: microcontroller -> embedded processor -> semiconductor IC. The HCS12X family adds a wider internal bus and richer peripherals (CAN, SCI, SPI, PWM, timers) to the classic HCS12, while keeping the CISC architecture and 16-bit data path. MC9S12XD64CAA therefore occupies the cost-down tier of the S12XD sub-family, sharing its peripherals with higher-flash siblings such as MC9S12XD128/MC9S12XD256. Key features include 64 KB Flash with 4 KB RAM plus 1 KB EEPROM, an 80 MHz maximum CPU frequency driving a 40 MHz internal bus, and an 8-channel 10-bit ADC for analog sensing. Connectivity is supplied by CAN, SCI (UART), SPI, and I2C, while timers, PWM, and a watchdog provide real-time control. The 80-pin QFP (PQFP, 14x14 mm) exposes 59 GPIOs and supports 2.35 V - 2.75 V or 5 V operation per DigiKey/NXP specifications, enabling direct interface to 5 V sensors and actuators in automotive body and chassis applications. Architecturally the device uses the enhanced HCS12X core with an instruction queue that prefetches the next opcodes while the current one executes, raising throughput versus the legacy HCS12 at the same bus speed. The 40 MHz internal bus allows the periphery to run at half the CPU clock, balancing performance and EMI. NXP's CISC implementation is mature for deterministic interrupt response, which matters in CAN-driven automotive networks. The on-chip EEPROM and 64 KB Flash support in-application reprogramming via background debug mode (BDM). Typical applications include automotive body controllers, instrument clusters, CAN/LIN gateway nodes, industrial PLC I/O modules, and HVAC climate controllers where CAN connectivity, 5 V tolerance, and the HCS12 software ecosystem are decisive. The wide supply range and abundant timers suit brushed-motor and solenoid drivers. When designing with this device, allocate a 4.7 kohm pull-up on the RESET line, decouple VDD/VSSX with 100 nF plus bulk caps, and reserve the BKGD pin for in-circuit debugging; consult the NXP S12XD-family reference manual for BDPM/BDM details. Use the 80-pin QFP footprint pad pattern verbatim - this part is end-of-life so plan a migration to MC9S12XEQ512CAG or similar S12XD-family siblings if long-term production is required. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the NXP datasheet alone.

見積もり お問い合わせ
MC9S12XD64MAA - 16-Bit 80MHz 64KB MCU | NXP | Automotive
MC9S12XD64MAA

MC9S12XD64MAA - 16-Bit 80MHz 64KB MCU | NXP | Automotive

NXP Semiconductors MC9S12XD64MAA is a 16-bit HCS12X automotive microcontroller operating at up to 80MHz, with 64KB of Flash memory and a 2.35V to 2.75V supply range, in an 80-pin QFP package. The verified listings identify automotive qualification, an S12X core, 59 I/O, and communication peripherals including CANbus, SPI, SCI, I2C, LINbus, and IrDA. A microcontroller is an integrated circuit that executes embedded software and coordinates a product's sensors, actuators, communications, and control functions. The HCS12X architecture provides a 16-bit instruction set compatible with the HCS12 family, an instruction queue, enhanced indexed addressing, and a programmer model compatible with HCS12 products. This places MC9S12XD64MAA within the hierarchy microcontroller, embedded processor, semiconductor, and automotive electronic control unit. The device combines 64KB of program Flash with 12KB of SRAM and supports both 2.5V and 5V operating descriptions in the supplied data. Its listed peripherals include CANbus, EBI/EMI, I2C, IrDA, LINbus, SCI, SPI, PWM, a watchdog timer, low-voltage detection, and power-on reset. These resources support embedded control and networking designs where deterministic interrupt handling and multiple communication interfaces are useful. At 80MHz, the S12X core targets control workloads requiring more computational headroom than an 8-bit MCU while retaining a mature 16-bit embedded ecosystem. The verified sources conflict on I/O counts: the NXP listing identifies 59 I/O, while one secondary source states 119 I/O. For conservative PCB and firmware planning, use the package pin assignments in the manufacturer documentation rather than treating both counts as interchangeable. Typical uses include automotive body and chassis controllers, CAN-based nodes, motor-control peripherals, instrument systems, gateways, and industrial controls adapted to the device's listed operating range. The -40°C to +125°C temperature rating makes the device suitable for harsh environments when the complete design, external components, and qualification requirements satisfy the application. Layout should preserve the QFP-80 footprint, decoupling requirements, clock stability, and exposed interface constraints from the manufacturer documentation. Because the NXP product page labels the part as end of life, engineers should confirm supply status before a new production release and validate any sourced inventory or alternative against pinout, memory, voltage, timing, and qualification requirements. This page consolidates manufacturer and distributor findings, lifecycle concerns, sourcing data, and engineering cautions that should be checked against the official NXP documentation before design commitment. The detailed alternative assessment is intentionally conservative because the supplied cross-reference results do not verify enough compatible drop-in parts.

見積もり お問い合わせ
MC9S12XDG128MAA - 16-bit HCS12X MCU, 128KB Flash, 80MHz, 80-QFP | NXP
MC9S12XDG128MAA

MC9S12XDG128MAA - 16-bit HCS12X MCU, 128KB Flash, 80MHz, 80-QFP | NXP

The NXP MC9S12XDG128MAA is a 16-bit HCS12X family microcontroller IC featuring an enhanced HCS12X CPU core running at 80MHz, with 128KB of on-chip Flash memory and 12KB of RAM, housed in an 80-pin QFP (14x14mm) package. It is part of the S12XD sub-family and is engineered for industrial and automotive embedded applications requiring deterministic real-time control and CAN connectivity. An MCU (microcontroller unit) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and a rich set of peripherals such as timers, ADC, communication interfaces (CAN, SPI, SCI, I2C), and GPIO. The HCS12X architecture from Freescale (now NXP) is a 16-bit CISC core that is upward-compatible with the legacy HC12/HCS12 instruction set, with enhancements including an instruction queue, enhanced indexed addressing, and interrupt stacking identical to the HCS12 programmer's model. The X-variant adds a peripheral co-processor (XGATE) for offloading interrupt-driven tasks. Key features include 128KB (128K x 8) of in-application programmable Flash, 12KB of RAM, an Enhanced Capture Timer (ECT), an 8-channel 10-bit ADC, multiple CAN 2.0 modules (msCAN), J1850/SCI/SPI interfaces, and an integrated voltage regulator for single 5V or 3.3V operation. The device supports background debug mode (BDM) and single-wire debug, simplifying in-circuit development and field updates. The S12XD architecture uses a unified memory map with Flash, RAM, and EEPROM in a single address space, and includes a Memory Protection Unit (MPU) and ECC on the Flash array. The XGATE co-processor can execute data-movement and peripheral-handling routines independently, freeing the main CPU for control-loop tasks. The 80-QFP (MAA suffix) package provides 80 general-purpose I/O lines with 5V tolerant inputs. Typical applications include automotive body and chassis ECUs, industrial CAN node controllers, building automation gateways, motor control (BLDC/PMSM) with CAN, and sensor-fusion nodes. Designers often pair the XGATE with an msCAN handler to achieve deterministic bus latency below 50 microseconds. Per the NXP product page, this part is flagged as End of Life and is not recommended for new designs - choose S12XEP or S12XET active variants for new programs.

見積もり お問い合わせ
MC9S12XDP512CPV - 16-bit HCS12X MCU, 512KB Flash | NXP
MC9S12XDP512CPV

MC9S12XDP512CPV - 16-bit HCS12X MCU, 512KB Flash | NXP

The NXP (formerly Freescale) MC9S12XDP512CPV is a 16-bit microcontroller built on the HCS12X core with XGATE co-processor, 512KB Flash, 32KB SRAM, and 4KB EEPROM in a 112-pin LQFP package. It is part of the S12XD family targeting automotive body, chassis, and network gateway applications where deterministic interrupt handling and large on-chip memory reduce system BOM. A 16-bit microcontroller (MCU) is a programmable computing IC that integrates a CPU, memory, peripherals, and I/O onto a single silicon die. The HCS12X family extends the legacy HCS12 with the XGATE auxiliary processor, an independent RISC engine that offloads interrupt-driven tasks from the main CPU. This dual-processor architecture shortens event-to-action latency and is a key reason the S12XD family remains widely deployed in automotive body controllers and CAN/LIN gateway ECUs. Key features include 50 MHz bus frequency (up to 80 MHz on derivatives), 91 I/O pins, CAN 2.0A/B controllers (msCAN12 modules), SCI, SPI, I2C, an 8-channel PWM, and a 16-channel 10-bit ADC. The 4KB EEPROM supports byte-erasable non-volatile parameter storage for vehicle configuration and OBD-II diagnostic data. The 112-LQFP package exposes an External Bus Interface (EBI) for off-chip memory expansion or external peripheral addressing. Typical applications include automotive body control modules, HVAC controllers, instrument clusters, CAN/LIN gateways, and industrial automation PLCs. The wide operating temperature range (-40C to +85C for the CPV industrial-grade suffix) suits under-hood and cabin environments. The XGATE co-processor is particularly effective in CAN message routing where multiple bus frames per millisecond require offloaded processing. When designing with this MCU, allocate the XGATE vector table and data buffers in the first 4KB of SRAM to avoid cross-bar bus contention with the S12X core. Always validate Flash read-while-write behavior against your bootloader layout before committing to A/B partition schemes. Use the on-chip 4KB EEPROM for calibration constants rather than wear-intensive counters; for high-endurance counters, mirror them in a wear-leveled Flash sector.

見積もり お問い合わせ
MC9S12XDP512MAG - 16-bit 80MHz 512KB Flash MCU | NXP
MC9S12XDP512MAG

MC9S12XDP512MAG - 16-bit 80MHz 512KB Flash MCU | NXP

The NXP MC9S12XDP512MAG is a 16-bit HCS12X automotive microcontroller with 512KB flash, 80MHz bus performance, and a 144-pin LQFP (20x20 mm) package. A microcontroller unit (MCU) is a single-chip computer that integrates a processor core, memory, and peripherals such as timers, serial interfaces, and analog-to-digital converters. Within the embedded systems hierarchy, the MC9S12XDP512MAG belongs to the 16-bit microcontroller class, positioned above 8-bit MCUs like the HC908 family and below 32-bit MCUs like the MPC55xx or SPC5 families. The S12XD family targets automotive body, gateway, and multiplexing applications where rich peripheral integration matters more than raw computing power. Key features of the MC9S12XDP512MAG include 512KB of on-chip flash memory, 10-bit analog-to-digital conversion, and the enhanced HCS12X CISC core that is upward compatible with the HCS12 instruction set. According to NXP documentation, the family delivers 32-bit-class performance while retaining the efficiency and code density of a 16-bit architecture, with enhanced indexed addressing and an instruction queue for faster execution. Technically, the S12XD core uses a co-processor concept (XGATE on XDT/XEP derivatives) and an interrupt stacking model identical to HCS12, which simplifies migration from earlier S12 designs. The device operates from a 2.5V/5V supply scheme typical of automotive MCUs, and the 144-pin LQFP option includes an external bus interface for expanded memory designs, while 112-pin LQFP and 80-pin QFP variants omit the external bus. Typical applications include automotive body control modules, multiplexed networking gateways using CAN and LIN, instrument clusters, and industrial control systems that benefit from the high peripheral count and 5V-tolerant I/O. When designing with this device, verify the NRND (Not Recommended for New Designs) lifecycle status with NXP before committing to new designs; the MC9S12XDP512MAG is intended for existing designs and last-time-buy planning. This page synthesizes distributor pricing context, drop-in alternatives within the S12XD and related families, and practical design notes not consolidated in the manufacturer datasheet.

見積もり お問い合わせ
MC9S12XDP512MAL - 16-Bit HCS12X MCU, 512KB Flash, 80MHz | NXP
MC9S12XDP512MAL

MC9S12XDP512MAL - 16-Bit HCS12X MCU, 512KB Flash, 80MHz | NXP

The NXP MC9S12XDP512MAL is a 16-bit microcontroller from the HCS12X family, integrating 512KB of Flash program memory, 32KB of RAM, and 4KB of EEPROM in a 112-pin LQFP package (20x20mm). Built around an enhanced HCS12X CPU core with a 40MHz bus and up to 80MHz peripheral clock, it delivers 32-bit-equivalent performance while remaining code- and pin-compatible with the HCS12 instruction set. The wide connectivity set (CANbus, EBI/EMI, I2C, IrDA, LINbus, SCI, SPI) and 91 general-purpose I/O lines make it a workhorse for automotive multiplexing applications. A microcontroller (MCU) is a single-chip computer that combines a CPU, memory, RAM, ROM/Flash, timers, and serial interfaces on one die. The MC9S12XDP512MAL belongs to the broader category: microcontroller -> 16-bit MCU -> HCS12X family -> HCS12X sub-family. Within a system hierarchy, this IC sits in the embedded control tier, between sensor/actuator interfaces and the application software layer. The on-chip peripherals make it a complete system-on-chip suitable for body, chassis, and powertrain subsystem designs. Key features include a 32-channel 10-bit ADC, an Enhanced Capture Timer (ECT) module, an 8-channel PWM unit, two inter-integrated circuit (IIC) controllers, up to six serial communication interfaces (SCI), three serial peripheral interfaces (SPI), and five controller area network (CAN) modules. The XGATE co-processor (2x peripheral clock, 160MHz peak) offloads interrupt-driven tasks from the main CPU, enabling efficient handling of high-speed serial streams. Hardware integrity features include Low Voltage Detect (LVD), Power-On Reset (POR), and a Watchdog Timer (WDT). The device operates from 2.35V to 2.75V core and supports 5V I/O on selected pins. The architecture pairs the HCS12X CPU with the XGATE peripheral co-processor over a common bus. Both cores access the same memory map, and the XGATE can service interrupts in parallel with CPU execution. The 80MHz peak peripheral clock and 40MHz bus clock enable deterministic interrupt latency suitable for time-critical CAN body domains. Internal Phase-Locked Loop (PLL) circuitry multiplies an external 4MHz crystal to derive the system clock, supporting Field Bus standards and automotive power management. Typical applications include automotive body control modules (BCM), door/window/seat controllers, HVAC climate control, instrument clusters, industrial PLC and motor control front ends, and LIN/CAN sub-system nodes. The automotive-grade qualification makes it well suited for harsh environment deployments. The MC9S12XDP512MAL distinguishes itself from earlier HCS12 variants via XGATE support, larger memory, and 5V-tolerant I/O, but requires careful attention to power-rail decoupling and PLL layout. Mass production boards should keep analog supplies and oscillator traces short and shielded to avoid EMI coupling into sensitive ADC inputs. This page synthesizes distributor pricing, drop-in alternatives, and design notes that are not found on the manufacturer datasheet.

見積もり お問い合わせ