マイクロコントローラ

製品 (20,000+)

MC9S12XDP512MPV-FR - HCS12X 16-Bit MCU 80MHz 512KB Flash | NXP
MC9S12XDP512MPV-FR

MC9S12XDP512MPV-FR - HCS12X 16-Bit MCU 80MHz 512KB Flash | NXP

The NXP MC9S12XDP512MPV-FR is a 16-bit HCS12X family microcontroller running at 80 MHz with 512 KB on-chip Flash and 32 KB RAM, housed in a 112-pin LQFP (20x20 mm) package. Per the Verified Web Data, this part is qualified for the -40C to +125C automotive temperature range and ships in tape-and-reel ("FR") packaging. A 16-bit microcontroller (MCU) is a microprocessor core optimized for embedded control, integrating CPU, memory, and peripherals on a single die. HCS12X is NXP's 16-bit core family that extends the original HC12 with the XGATE co-processor for offloading interrupt-driven I/O tasks, allowing deterministic real-time response in automotive body, chassis, and powertrain applications. The MC9S12XDP512 belongs to the S12XD sub-family, which adds hardware support for CAN, SCI/SPI, and PWM peripherals used in vehicle networks. Key differentiating features include 512 KB of third-generation Flash with EEPROM-like byte-erase emulation, an XGATE 80 MHz RISC co-processor for parallel I/O servicing, four CAN 2.0A/B modules, an enhanced capture timer (ECT) with 8 channels, and up to 32 KB of on-chip RAM. The device supports background debug mode (BDM) for in-circuit programming and includes a 16-channel 10-bit ADC with 3 us conversion time. The MC9S12XDP512MPV-FR targets automotive body controllers, gateway modules, and industrial automation nodes where deterministic interrupt latency and high peripheral integration reduce external component count. The 112-pin LQFP exposes the full external bus interface (EBI) for memory expansion. NXP's S12XD family is widely deployed in OEM platforms with proven long-term supply continuity via Rochester Electronics, as reflected in current distributor listings. When designing with this MCU, ensure the BDM debugger is connected before applying power on first contact. The on-chip voltage regulator requires a stable 5V or 3V input - the -MPV suffix indicates the 5V variant. Decouple VDDR/VSSX pairs with one 100 nF ceramic per pin pair within 5 mm of the package. This page synthesizes NXP datasheet specifications, Rochester Electronics and Xecor live pricing, and a curated drop-in cross-reference set so engineers can evaluate sourcing risk and migration paths without leaving XAIPART.

見積もり お問い合わせ
MC9S12XDP512VAL - 16-bit 80MHz HCS12X MCU 512KB Flash | NXP
MC9S12XDP512VAL

MC9S12XDP512VAL - 16-bit 80MHz HCS12X MCU 512KB Flash | NXP

The NXP MC9S12XDP512VAL is a 16-bit HCS12X microcontroller delivering 80 MHz CPU performance with 512 KB of on-chip Flash and a 112-pin LQFP package (20x20 mm). It belongs to the S12XD family that combines 32-bit-class peripheral integration with the proven HCS12 instruction set, targeting automotive multiplexing and body-network applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), working memory (RAM), and a rich set of peripherals such as timers, ADC, communication controllers, and GPIO. The HCS12X architecture extends the HCS12 core with an enhanced indexed addressing mode, a hardware instruction queue, and an extended instruction set while remaining object-code compatible with legacy HCS12 code, easing migration of existing automotive platforms. Key features of the MC9S12XDP512VAL include 512 KB Flash organised as 512K x 8 with EEPROM emulation capability, an XGATE co-processor for offloading interrupt-driven peripheral servicing, multiple CAN 2.0A/B modules for in-vehicle networking, an 8/10/12-bit ATD (Analog-to-Digital) converter, and an enhanced capture timer. The wide 2.35 V to 2.75 V single-supply range (with 5 V-tolerant I/O on selected pins) simplifies integration with both 3.3 V and 5 V analog signal chains. The HCS12X core delivers up to 80 MHz bus operation, instruction queueing, and a separate XGATE auxiliary core that handles interrupt-driven peripheral tasks with deterministic latency. The peripheral set includes multiple MSCAN modules, SPI, SCI/UART, IIC, PWM, timers and an 8-channel ATD, allowing designers to consolidate several discrete controllers into a single chip. Typical applications include automotive body control modules, chassis controllers, gateway ECUs, CAN-based multiplexing networks, and industrial CAN-FD bridge nodes. Designers frequently choose this part for ECU upgrades where 16-bit code compatibility and large Flash headroom are both required. When designing with this device, ensure the integrated voltage regulator and external decoupling match the 2.5 V core rail requirements and that unused CAN pins are tied to defined logic levels to avoid bus-dominant faults. The 112-pin LQFP also requires careful PCB layout for the exposed thermal pad to dissipate peak current bursts from CAN drivers. This page synthesises distributor pricing, parametric drop-in alternatives, and practical design notes not found in the manufacturer datasheet, helping engineers rapidly qualify the MC9S12XDP512VAL for both new designs and legacy platform refresh.

見積もり お問い合わせ
MC9S12XDQ256VPV - 16-Bit 40MHz MCU 112-LQFP | NXP
MC9S12XDQ256VPV

MC9S12XDQ256VPV - 16-Bit 40MHz MCU 112-LQFP | NXP

The NXP Semiconductors MC9S12XDQ256VPV is a 16-bit CPU12 automotive-oriented microcontroller operating at up to 40 MHz and packaged in a 112-terminal LQFP. Verified listings identify an industrial temperature grade, gull-wing terminals, a square 20 mm x 20 mm LQFP package, 256 Kbytes of flash memory, and suitability for automotive multiplexing applications. The supplied evidence does not explicitly confirm RAM size, supply voltage, peripheral configuration, or pin assignments. A microcontroller, or MCU, integrates a processor core, nonvolatile program memory, data memory, timers, serial interfaces, and input/output circuitry on one semiconductor device. Within the embedded-control hierarchy, the CPU12 MCU belongs to the 16-bit microcontroller, embedded processor, and semiconductor categories. It executes firmware for body, vehicle, and industrial control functions where deterministic control and peripheral integration can reduce the component count of a controller board. The MC9S12XD family is described by Freescale as delivering 32-bit performance while retaining the efficiencies of a 16-bit MCU. Verified distributor data specifically identifies the MC9S12XDQ256VPV as a CPU12 device with 40 MHz operation and 256 Kbytes of flash. Its 112-pin LQFP exposes substantially more I/O than a small 32- or 64-pin MCU, making the family suitable for multiplexing nodes that need multiple digital interfaces and automotive-network connectivity. The family datasheet is the appropriate authority for startup, clocking, memory organization, peripherals, electrical limits, timing, and pin multiplexing. Since the provided search excerpts do not contain the complete register or electrical tables, those values are not inferred here. Firmware replacement should therefore compare the complete pin function list, clock requirements, memory map, peripherals, voltage limits, package dimensions, and qualification requirements rather than relying only on the 40 MHz headline frequency. Typical uses include automotive body-control modules, multiplexing controllers, seat and climate-control electronics, lighting controllers, instrument-cluster electronics, and industrial embedded-control panels. In these systems, the MCU consolidates logic and interface handling while firmware coordinates sensor inputs and actuator outputs. The LQFP package is easy to inspect and solder but requires more board area and fine-pitch routing than a compact QFN package. Before layout, reserve all power, ground, reset, clock, programming, and multiplexed peripheral pins according to the datasheet. Preserve the required decoupling and oscillator-layout practices, then validate unused pins and boot configuration. Because automotive designs are especially sensitive to reset behavior, bus timing, transient immunity, and supply disturbances, use the manufacturer documentation for the exact device revision and qualification basis. This page combines the verified family-level position, exact package information, commercial listings, and engineering-oriented design cautions. It also distinguishes confirmed facts from unavailable specifications, avoiding unsupported claims while providing a practical basis for sourcing and initial design evaluation of the MC9S12XDQ256VPV.

見積もり お問い合わせ
MC9S12XDQ512CPV - 16-Bit HCS12X MCU 512KB Flash LQFP-112 | NXP
MC9S12XDQ512CPV

MC9S12XDQ512CPV - 16-Bit HCS12X MCU 512KB Flash LQFP-112 | NXP

The NXP (formerly Freescale) MC9S12XDQ512CPV is a 16-bit HCS12X family microcontroller integrating 512KB of Flash, 32KB RAM, and 4KB EEPROM, housed in a 112-pin LQFP (20x20 mm) industrial-grade package with an operating temperature range of -40C to +85C. The device runs from 2.375V to 5.5V supply at up to 80 MHz bus clock and contains the CPU12X core, which adds XGATE coprocessor support for offloading interrupt-driven peripheral servicing, plus 91 external I/O pins across multiple package banks. An HCS12X microcontroller is a 16-bit automotive-grade MCU architecture descended from the original Freescale HC12 family; it scales the 68HC12 instruction set to an enhanced 80 MHz pipeline and adds an instruction-cycle-accurate data capture module plus the XGATE RISC coprocessor. Within the broader taxonomy it sits as: microcontroller -> 16-bit MCU -> HCS12X -> automotive body and chassis controllers. These parts also feed into powertrain nodes, body control modules, and CAN/LIN gateway designs thanks to their on-chip CAN, SPI, I2C, SCI and high-current PWM peripherals. Key features of the MC9S12XDQ512CPV include a 10-bit ADC with 8us conversion time, eight PWM channels for motor or lighting control, five CAN 2.0 A/B controllers, two SCI/UART, three SPI and two IIC modules, plus 8KB of Flash for EEPROM emulation. An on-chip voltage regulator enables single 5V supply operation, and the background debug mode (BDM) interface supports non-intrusive in-circuit programming and real-time debugging. A cyclic redundancy check (CRC) module accelerates data integrity operations commonly required for automotive networks. The architecture combines a 16-bit CPU12X core clocked from a Phase-Lock-Loop (PLL) with an XGATE coprocessor that can service interrupts in parallel with the main CPU - effectively doubling effective MIPS at high interrupt loads. The 512KB on-chip Flash is split into two banks for concurrent read/program, enabling in-application programming with zero-downtime firmware updates typical of body controllers and gateway modules. Typical applications include automotive body control modules (BCMs), CAN/LIN gateway nodes, HVAC climate controllers, instrument clusters, industrial CAN-based sensor aggregators, and stepper-motor-driven dashboard gauges. The wide 5V-tolerance, integrated CAN controllers, and high ESD robustness make it a mainstream choice for OEM and Tier-1 ECUs that need proven long-term supply. Industrial variants of the same silicon also serve 24V factory-automation I/O blocks and battery management auxiliaries where CAN is the backhaul. When designing with the MC9S12XDQ512CPV, place the 0.1uF and 4.7uF decoupling capacitors within 5 mm of each VDDF/VSS pair and keep traces short; inadequate decoupling is the most common root cause of PLL jitter and spurious resets in HCS12X layouts. Pull the RESET pin high through an external 4.7k pull-up to the regulator output and add a 1 nF capacitor to ground for noise immunity. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical PCB design notes not found in the standalone manufacturer datasheet, optimized for engineers evaluating or sourcing the part.

見積もり お問い合わせ
MC9S12XDT256CAA - 16-bit 80MHz 256KB Flash MCU | NXP
MC9S12XDT256CAA

MC9S12XDT256CAA - 16-bit 80MHz 256KB Flash MCU | NXP

The NXP (Freescale) MC9S12XDT256CAA is a 16-bit HCS12X microcontroller with a 256KB (256K x 8) Flash memory, 80MHz core performance, and 59 general-purpose I/O lines, housed in an 80-pin QFP (14x14 mm) surface-mount package. A 16-bit microcontroller is an embedded processor whose internal data path, registers, and instruction handling operate on 16-bit words, placing it above 8-bit MCUs in arithmetic throughput while remaining far simpler than 32-bit parts. Within the power management and embedded control hierarchy, the MC9S12X family belongs to the HCS12X architecture, which is upward compatible with the widely deployed HCS12 instruction set, so interrupt stacking and the programmer's model remain identical to HCS12 while adding an instruction queue, enhanced indexed addressing, and an enhanced instruction set. Key features include the 16-bit HCS12X CISC CPU, 256KB on-chip Flash for code storage, industrial temperature operation from -40C to +85C, and a wide 2.35V to 5.5V operating supply per distributor listings, with a 10-bit ADC for analog sensing. The 80-QFP 14x14 mm gull-wing package supports standard surface-mount assembly. Technically, the S12XD series integrates the XGATE co-processor concept family heritage and peripheral set typical of automotive-grade 16-bit MCUs; per NXP, the MC9S12XDT256CAA is an S12XD 16-bit MCU with HCS12X core, 256KB Flash, 80MHz, QFP 80. Note that NXP currently lists this part as NRND (Not Recommended for New Designs), so new projects should evaluate the newer S12XE or MagniV alternatives. Typical applications include body control modules, instrument clusters, industrial control systems, motor control, and legacy automotive networking nodes that rely on the HCS12X ecosystem and its CAN/LIN peripherals. A key design consideration: since the device is NRND, any new PCB design should verify long-term supply or select an active family member with the same 80-QFP footprint. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet.

見積もり お問い合わせ
MC9S12XDT256CAG - 16-bit HCS12X MCU, 256KB Flash, 144-LQFP | NXP
MC9S12XDT256CAG

MC9S12XDT256CAG - 16-bit HCS12X MCU, 256KB Flash, 144-LQFP | NXP

The NXP MC9S12XDT256CAG is a 16-bit HCS12X microcontroller with 256KB program Flash, 80 MHz CPU, and 144-pin LQFP (20x20) package. The 'CAG' suffix denotes the 144-LQFP operating range -40C to +85C, targeted at automotive multiplexing and body-electronics applications. An MCU (microcontroller unit) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), working memory (RAM), and a rich set of peripherals such as timers, ADCs, communication controllers, and GPIO on a single die. The MC9S12XDT256CAG belongs to the S12XD family that delivers 32-bit-like performance while preserving the HCS12 instruction set for code reuse. As a derivative of the broader Freescale/NXP HCS12 lineage, it sits in the category: MCU -> microcontroller -> embedded processor -> semiconductor. Key features include 256KB Flash, 16KB RAM, 4KB EEPROM, 119 I/O lines, 8/16-bit PWM, up to 8 timer channels, MSCAN (CAN 2.0A/B) controller, SCI/SPI serial interfaces, 16-channel 10-bit ADC, and a 5V-tolerant I/O. The XGATE co-processor offloads interrupt-driven tasks from the main CPU, effectively doubling throughput for I/O-bound automotive workloads. Internal Phase-Locked Loop (IPLL) generates the 80 MHz bus clock from an external 4-16 MHz crystal. The architecture uses an enhanced 16-bit CISC core with 20-bit ALU extensions, instruction queue, and enhanced indexed addressing. XGATE is an independent RISC-style peripheral co-processor that runs concurrent to the CPU and is ideal for processing CAN, LIN, and SPI traffic in real time. The device operates from a single 2.5V core / 5V I/O supply pair, simplifying automotive 12V rail design. Typical applications include automotive body controllers (BCM), gateway modules, instrument clusters, HVAC control, door modules, seat controllers, and industrial CAN-node controllers. The 5V I/O tolerance and on-chip MSCAN make it ideal for any 12V-board automotive multiplexing network. When designing, pay attention to decoupling: place 100nF ceramic + 4.7uF bulk on VDDR/VSS, plus 10uF on VDDX/VSSX. Use NXP's BDM (Background Debug Mode) interface via the BKGD pin for in-circuit programming. The PLL reference loop filter (XFC pin) capacitor selection is critical for jitter performance. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

見積もり お問い合わせ
MC9S12XDT256CPV - 16-bit HCS12X MCU, 256KB Flash, 112-LQFP | NXP
MC9S12XDT256CPV

MC9S12XDT256CPV - 16-bit HCS12X MCU, 256KB Flash, 112-LQFP | NXP

The NXP MC9S12XDT256CPV is a 16-bit HCS12X CISC microcontroller with 256KB on-chip Flash, 40 MHz CPU speed, and 2.5V/5V dual-voltage operation, housed in a 112-pin LQFP (20x20 mm) package. It belongs to the S12XD family and targets automotive multiplexing applications, delivering 32-bit-style performance through the XGATE co-processor while retaining the HCS12 instruction set for code compatibility. An HCS12X microcontroller (MCU) is a 16-bit automotive-grade microcontroller that combines the legacy HCS12 instruction set with an XGATE peripheral co-processor to offload interrupt-driven tasks. It sits in the broader category: MCU -> 16-bit MCU -> HCS12X -> automotive MCU -> embedded processor -> semiconductor. The XGATE engine delivers up to 80 MIPS on peripheral events while the S12X CPU runs the application code, enabling deterministic real-time response in body, chassis, and gateway ECUs. Key specifications include 256KB of program Flash with 4KB EEPROM and 12KB RAM, an 80 MHz XGATE peripheral co-processor, a 25/40 MHz CPU bus, an enhanced Capture Timer (ECT), four PWM channels with 8-bit or 16-bit resolution, up to two CAN 2.0A/B modules, two SCI, two SPI, an I2C bus, and an 8-channel 10-bit ATD (ADC). The 112-LQFP industrial temperature grade supports -40C to +85C, suiting under-the-hood and body-control modules. Architecturally the device pairs the HCS12X CPU with the XGATE RISC co-processor, allowing peripheral DMA-style servicing. It supports background-debug mode (BDM), on-chip voltage regulator, and a periodic interrupt timer. The 112-LQFP package supports external address/data bus expansion, suitable for multi-drop automotive networks. Typical applications include automotive body control, CAN/LIN gateway nodes, HVAC modules, instrument cluster MCUs, and industrial multiplexing controllers. The wide 2.5V/5V supply range simplifies integration into legacy 5V analog/mixed-signal automotive subsystems while preserving modern peripherals. When designing with this part, ensure decoupling caps are placed close to VDD/VSS pairs and that unused pins are configured to a defined state in software to avoid shoot-through. The XGATE initialization must be performed before peripheral interrupts are enabled. This page synthesizes distributor pricing, automotive-same-family drop-in alternatives, and practical firmware boot notes that complement the manufacturer datasheet reference manual.

見積もり お問い合わせ
MC9S12XDT256MAA - 16-bit 80MHz 256KB Flash MCU | NXP
MC9S12XDT256MAA

MC9S12XDT256MAA - 16-bit 80MHz 256KB Flash MCU | NXP

The NXP Semiconductors MC9S12XDT256MAA is a 16-bit HCS12X microcontroller running at 80 MHz with 256KB (256K x 8) Flash program memory and 16KB RAM, housed in an 80-pin QFP (14x14 mm) surface-mount package. A 16-bit microcontroller (MCU) is a single-chip computing device whose arithmetic logic unit and internal data paths are 16 bits wide. The MC9S12XD family sits within the broader HCS12X / S12XD hierarchy of automotive-oriented microcontrollers, which themselves belong to the microcontroller unit (MCU) class of embedded processors. MCUs integrate CPU, memory, and peripherals on one die, making them the control backbone of body electronics, gateways, and industrial nodes. Key features include the 16-bit HCS12X CISC core, upward compatible with the HCS12 instruction set, delivering 32-bit-class performance with 16-bit efficiency. Peripherals include CANbus, EBI/EMI external bus interface, I2C, IrDA, LINbus, SCI, and SPI connectivity, plus PWM, watchdog timer (WDT), low-voltage detect (LVD), and power-on reset (POR). The enhanced indexed addressing and instruction queue improve code density and interrupt latency versus legacy HCS12 devices. Architecturally, the S12XD family was targeted at automotive multiplexing applications, where its XGATE-style co-processor concept and rich CAN/LIN mix offload communication processing from the main core. The 256KB Flash supports single-chip designs without external memory, and the 5V-tolerant I/O structure suits harsh 12V automotive electrical environments. Typical applications include automotive body control modules, gateway nodes bridging CAN and LIN networks, dashboard and instrumentation clusters, and industrial control systems that benefit from 5V noise immunity. A key design consideration is lifecycle status: NXP lists this part as NRND (Not Recommended for New Designs), so new projects should evaluate S12XE/XS family successors while the XDT256 remains ideal for maintaining existing designs. This page synthesizes distributor inventory data, drop-in alternatives, lifecycle status, and practical design notes not found in the manufacturer datasheet, delivering information gain beyond standard catalog listings.

見積もり お問い合わせ
MC9S12XDT256MAG - 16-bit HCS12X MCU 256KB Flash 144-LQFP | NXP
MC9S12XDT256MAG

MC9S12XDT256MAG - 16-bit HCS12X MCU 256KB Flash 144-LQFP | NXP

The NXP MC9S12XDT256MAG is a 16-bit HCS12X microcontroller IC running at 80MHz with 256KB (256K x 8) of on-chip Flash, housed in a 144-pin LQFP (20x20) package. It belongs to NXP's S12XD family, which extends the HCS12 architecture with an enhanced indexed addressing mode, instruction queue, and interrupt stacking compatible with the original HCS12 instruction set. An MCU (microcontroller unit) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), working memory (RAM), and programmable I/O peripherals. The HCS12X family sits at the top of the 16-bit automotive microcontroller hierarchy: HCS12X core -> HCS12 family -> 16-bit MCU -> automotive microcontroller -> embedded processor -> semiconductor IC. Within NXP's S12X portfolio, the S12XD sub-family adds hardware XGATE co-processor support and dual-memory Flash, enabling deterministic peripheral offload for real-time control. Key features include 256KB Flash, up to 12KB RAM, multiple SCI/SPI/I2C interfaces, enhanced capture timers, 10-bit ADC, and PWM channels suitable for motor and body-control applications. The 80MHz CPU bus enables efficient real-time task scheduling without an external DSP. The device integrates a CAN 2.0 module, supporting automotive network stacks. Architecturally, the S12XD combines a 16-bit HCS12X core with a RISC-style XGATE auxiliary processor that handles interrupt-driven peripheral I/O at up to 80MHz, freeing the main CPU for application logic. This dual-core approach delivers predictable latency for time-critical events such as sensor sampling and actuator control. Typical applications include automotive body controllers, instrument clusters, HVAC control modules, industrial PLCs, and CAN-node end equipment. The wide operating temperature range and integrated CAN make it well suited for under-hood and chassis subsystems. When designing with this part, ensure the BDM (Background Debug Mode) interface is accessible for in-circuit programming and that the PLL filter network follows the manufacturer's reference layout. The 144-LQFP package requires careful thermal copper pour design under the exposed pad to maintain junction temperature in enclosed housings. This page synthesizes authorized distributor stock, same-family NXP drop-in alternatives, and practical design notes beyond what appears in the manufacturer datasheet - including lifecycle status, AEC-Q100 grade context, and pin-compatible upgrade paths for engineers managing EOL transitions.

見積もり お問い合わせ
MC9S12XDT256MAL - 16-bit HCS12X MCU, 256KB Flash, 80MHz | NXP
MC9S12XDT256MAL

MC9S12XDT256MAL - 16-bit HCS12X MCU, 256KB Flash, 80MHz | NXP

The NXP MC9S12XDT256MAL is a 16-bit HCS12X microcontroller with 256KB of Flash, 80MHz CPU clock, and 112-pin LQFP (20x20 mm) packaging for automotive body and chassis modules. The HCS12X core extends the HCS12 instruction set with enhanced indexed addressing, an instruction queue, and interrupt stacking compatible with HCS12, while integrating XGATE co-processors for deterministic peripheral offload. An automotive microcontroller is a single-chip computer integrating CPU, memory, I/O peripherals, and communication interfaces designed to operate reliably in harsh vehicle environments (under-hood temperature swings, EMI, vibration). Within the broader semiconductor hierarchy, microcontrollers belong to integrated circuits -> microcontrollers -> 16-bit/32-bit MCUs -> automotive-grade ECUs. The MC9S12XDT256MAL sits in the HCS12X family targeted at body electronics, gateway modules, and central body controllers requiring LIN/CAN connectivity and real-time determinism. Key features include 256KB on-chip Flash (256K x 8), 2.5V/5V supply operation, integrated CAN and SCI/SPI peripherals, PWM and timer modules for motor control, and an A/D converter for sensor acquisition. The device supports extended operating temperature ranges appropriate for automotive AEC-Q100 qualified applications. The 112-LQFP package provides ample I/O for body controller requirements. Technically, the HCS12X core delivers up to 80MHz bus clock with sophisticated interrupt handling, while XGATE co-processors allow deterministic peripheral servicing without CPU intervention. The architecture balances Flash endurance, EEPROM emulation, and security features such as memory protection units, making it suitable for locked-immobilizer-style applications seen in central body modules. Typical applications include automotive body ECUs, central body modules with immobilizer functions, gateway ECUs bridging CAN/LIN networks, instrument cluster controllers, climate control modules, and industrial CAN-based control nodes. The 16-bit core, automotive temperature grade, and AEC-Q100 lineage make this MCU well-matched to vehicle networks where deterministic response and reliability are mandatory. When designing with this part, ensure proper decoupling near all supply pins, follow NXP's recommended oscillator layout guidelines for EMC compliance, and confirm extended-temperature qualification against your application's thermal envelope. Designers migrating from older HCS12 parts benefit from full instruction-set compatibility, simplifying firmware porting. This page consolidates distributor pricing, drop-in alternatives within the HCS12X family, and practical design notes not found in the manufacturer datasheet summary.

見積もり お問い合わせ
MC9S12XDT256VAA - 16-bit HCS12X MCU 256KB Flash 80MHz | NXP
MC9S12XDT256VAA

MC9S12XDT256VAA - 16-bit HCS12X MCU 256KB Flash 80MHz | NXP

The NXP MC9S12XDT256VAA is a 16-bit HCS12X-family microcontroller with 256KB on-chip Flash, 80MHz CPU speed, and a 10-bit ADC, housed in an 80-pin QFP (14x14 mm) package. Per the NXP product page, this part is flagged NRND (Not Recommended for New Designs), indicating that it remains in production for existing customers but NXP is steering new designs toward newer S12X/S12XE families. An MCU (microcontroller) is a single-chip processor that integrates a CPU core, program memory (Flash), data memory (RAM), peripherals (timers, ADC, communication interfaces), and interrupt logic into one device. Within the semiconductor taxonomy, an MCU sits under microprocessor -> microcontroller -> embedded controller, and the HCS12X series specifically targets automotive body, chassis, and powertrain applications where deterministic interrupt response and CAN connectivity are critical. Key features of the MC9S12XDT256VAA include 256KB (256K x 8) Flash, 12KB RAM, an enhanced XGATE coprocessor for offloading interrupt-driven tasks from the main CPU, multiple CAN 2.0 controllers, an 8-channel 10-bit ADC, and an SCI/SPI/I2C peripheral set. The HCS12X core is upward-compatible with the HCS12 instruction set while adding an instruction queue and enhanced indexed addressing modes. Architecturally, the HCS12X core pairs the legacy CISC S12 CPU with the XGATE RISC-style coprocessor that runs at 80MHz and can service peripheral interrupts autonomously, effectively doubling real-time throughput for I/O-heavy applications. The part operates from a 2.5V/5V supply rail, making it compatible with both 3.3V and 5V automotive sensor networks. Typical applications include automotive body control modules, CAN gateway nodes, instrument clusters, HVAC controllers, and industrial CAN-based sensor hubs. The wide operating voltage and integrated CAN make it especially suited to in-vehicle networking where EMC robustness is required. Design consideration: because the part is NRND, validate long-term supply with NXP before committing new designs; PCN windows and last-time-buy dates should be confirmed via the NXP product page. Ensure your PCB footprint matches the 80-QFP (14x14) land pattern and that your linker script reserves the XGATE memory region correctly. This page synthesizes distributor pricing, drop-in S12XD-family alternatives, and practical design notes not always consolidated in the manufacturer datasheet.

見積もり お問い合わせ
MC9S12XDT256VAL - 16-Bit 80MHz HCS12X MCU 256KB Flash | NXP
MC9S12XDT256VAL

MC9S12XDT256VAL - 16-Bit 80MHz HCS12X MCU 256KB Flash | NXP

The NXP MC9S12XDT256VAL is a 16-bit HCS12X microcontroller (MCU) running at 80 MHz with 256 KB on-chip Flash, 16 KB RAM, 4 KB EEPROM and an integrated XGATE co-processor, housed in a 112-pin LQFP (20 x 20 mm) package for automotive body and chassis applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), non-volatile storage (EEPROM) and a rich set of peripherals. The HCS12X family extends the legacy HCS12 architecture with an enhanced instruction set, instruction queue, enhanced indexed addressing, and an XGATE peripheral co-processor that offloads interrupt-driven I/O for deterministic real-time response. Within the broader taxonomy: MCU -> 16-bit microcontroller -> automotive microcontroller -> body/chassis ECU controller -> semiconductor. Key features of the MC9S12XDT256VAL include a 16-channel 10-bit ADC, up to 91 general-purpose I/O lines, multiple CAN 2.0 controllers (msCAN), SPI, I2C, SCI/UART, an 8-channel PWM, and a periodic interrupt timer. The device operates from a single 2.5 V core / 5 V I/O supply and supports background debug mode (BDM) for in-circuit development. The HCS12X CPU executes CISC instructions at 80 MHz, while the XGATE RISC co-processor runs at twice the bus speed to handle high-rate peripheral events with predictable latency. The 256 KB Flash is organized as 256K x 8 and supports erase/program operations across -40C to +125C, making the part suitable for under-hood and body-control modules. Typical applications include automotive body controllers, gateway/Bridge ECUs between CAN and LIN networks, instrument clusters, HVAC control modules, seat and door zone modules, and industrial CAN-based distributed I/O. The wide peripheral mix also supports battery-management slaves and 24 V industrial sensor hubs. When designing with this MCU, ensure the 5 V analog supply (VDDA) and 2.5 V digital supply (VDDR) are decoupled with 100 nF + 4.7 uF ceramic capacitors placed within 5 mm of the respective pins. Route the oscillator traces shorted and guarded; for EMI-sensitive automotive designs place a guard ring around the EXTAL/XTAL pins and keep them away from switching nodes. The LQFP-112 footprint dissipates up to ~1 W with a proper copper pour on the exposed pad tie-off. This page synthesizes distributor pricing, verified drop-in alternatives from the HCS12XD family, and practical PCB design notes that supplement the manufacturer datasheet and accelerate engineering decisions.

見積もり お問い合わせ
MC9S12XDT384MPV - 16-Bit 384KB Flash Automotive MCU | NXP
MC9S12XDT384MPV

MC9S12XDT384MPV - 16-Bit 384KB Flash Automotive MCU | NXP

The NXP Semiconductors MC9S12XDT384MPV is a 16-bit HCS12X automotive microcontroller with 384 KB of flash memory, an 8 MHz system clock, a 10-bit ADC, and a 112-terminal LQFP package. It is designed for automotive multiplexing applications requiring 32-bit-class performance benefits in a 16-bit MCU architecture. The device is identified as automotive grade and supplied in a square 20 mm by 20 mm gull-wing LQFP package. An automotive microcontroller is an embedded semiconductor that executes control software, reads sensors, controls actuators, and manages communication interfaces within a vehicle. The HCS12X family combines a 16-bit MCU with higher-performance execution capabilities and belongs to the broader embedded-controller hierarchy: HCS12X automotive MCU, embedded microcontroller, semiconductor, and electronic component. It is intended for applications where deterministic control, connectivity, and operating reliability are important. Verified distributor data identifies the MC9S12XDT384MPV with 384 KB of flash, an 8 MHz clock, a 10-bit ADC, and a 2.35 V to 2.75 V supply range. Its 112 gull-wing terminals make it suited to designs requiring numerous external signals, mixed automotive subsystems, and dedicated communication or control functions. The automotive temperature classification identifies the part for vehicle-oriented designs, although detailed temperature limits were not present in the supplied verification data. The MC9S12XDT384MPV is associated with the S12XD family and is intended for automotive multiplexing applications. Its architecture and peripheral mix should be evaluated against the specific vehicle network, actuator load, sensor signal range, memory requirements, and qualification obligations. Because the available data does not provide verified operating-temperature, memory-map, communication-protocol, or ADC-performance details, those values must be confirmed in the manufacturer datasheet before design release. Typical application domains include body and multiplexing control modules, automotive gateway logic, distributed vehicle controllers, sensor-conditioning systems, actuator controllers, and embedded automotive communication hubs. The 112-terminal LQFP package exposes more I/O than a small controller package and can reduce the need for external interface expansion when the board area permits. When selecting this MCU, verify package dimensions, pin multiplexing, supply sequencing, clock requirements, peripheral availability, automotive qualification status, and software-tool support. Do not assume that a distributor cross-reference result guarantees pin-to-pin or software compatibility. This page consolidates verified distributor specifications, sourcing information, package details, application guidance, and explicit data gaps. It is intended to accelerate initial engineering review while preserving traceability to the supplied manufacturer and distributor records.

見積もり お問い合わせ
MC9S12XDT512CAA - 16-Bit HCS12X MCU 512KB Flash | NXP
MC9S12XDT512CAA

MC9S12XDT512CAA - 16-Bit HCS12X MCU 512KB Flash | NXP

The NXP MC9S12XDT512CAA is a 16-bit HCS12X-family microcontroller operating at 80 MHz, integrating 512 KB of Flash, 20 KB of RAM, and 4 KB of EEPROM in an 80-pin PQFP (14x14 mm) package. It is targeted at automotive multiplexing, body electronics, and safety-critical chassis applications where 32-bit-style peripheral integration is required on a 16-bit CISC architecture. The bus runs at 40 MHz, and the device supports a wide operating voltage range with both 3.3 V and 5 V analog/mixed-signal domains. A microcontroller (MCU) is an integrated circuit that combines a CPU core, program memory (Flash/ROM), working memory (RAM), non-volatile storage (EEPROM/Data Flash), and a rich set of peripherals (timers, ADC, SCI/SPI, CAN, PWM, GPIO) on a single die. The HCS12X line is the enhanced superset of the original HCS12 core, retaining upward source/binary compatibility while adding an instruction queue, enhanced indexed addressing modes, and an extended instruction set. Within the broader taxonomy, the MC9S12XDT512CAA belongs to: microcontroller -> embedded MCU -> automotive MCU -> HCS12X family -> S12XD sub-family. Key differentiating features include the 16-channel enhanced capture timer (ECT) module, an 8-channel 10-bit ADC, up to 59 general-purpose I/O pins, integrated CAN 2.0 (msCAN) controllers for in-vehicle networking, and an on-chip voltage regulator for single 5 V supply operation. The XDT suffix denotes the higher-density Flash sub-family with the XGATE co-processor disabled in this mask set, simplifying real-time interrupt handling. The device is rated -40C to +85C industrial and is qualified to AEC-Q100 for automotive deployments. The architecture is a CISC Harvard-style core with a 16-bit ALU, 20-bit indexed addressing, and a hardware instruction queue that lets the bus fetch the next opcode while the ALU executes the current one. This combination delivers effective throughput close to a 32-bit MCU on byte- and bit-oriented control code, while keeping the interrupt latency and register model identical to legacy HCS12 designs - allowing code reuse for OEMs with large HCS12 code bases. Typical applications include automotive body controllers, gateway modules, CAN-based lighting and HVAC controllers, instrument clusters, and industrial PLC edge nodes. The wide supply range (2.35 V to 5.5 V) and on-chip EEPROM allow direct connection to 12 V automotive rails after external transients are clamped. When designing with the MC9S12XDT512CAA, allocate BDM (background debug mode) pins to a 6-pin header on the PCB for in-circuit debug and Flash programming. Ensure the ECLK/XIRQ/IRQ pins have proper pull-ups per NXP recommendations, and place the internal voltage regulator's bulk capacitor close to the VREG pin to minimize digital noise coupling into the ADC reference.

見積もり お問い合わせ
MC9S12XDT512CAG - 16-bit 80MHz 512KB Flash MCU | NXP
MC9S12XDT512CAG

MC9S12XDT512CAG - 16-bit 80MHz 512KB Flash MCU | NXP

The NXP MC9S12XDT512CAG is a 16-bit HCS12X microcontroller operating at up to 80 MHz with 512 KB (512K x 8) of on-chip Flash memory, housed in a 144-pin LQFP (20x20 mm) surface-mount package. A microcontroller unit (MCU) is a single-chip embedded processor that integrates a CPU core, program memory, data memory, and peripheral functions such as timers, communication interfaces, and analog-to-digital converters on one die. Within the semiconductor hierarchy, the MC9S12XDT512CAG belongs to the 16-bit microcontroller class, part of the broader family of embedded processors used in automotive and industrial control systems, sitting above simple 8-bit MCUs and below 32-bit application processors. Key features include the enhanced HCS12X CPU core, upward compatible with the HCS12 instruction set, which preserves code compatibility and programmer's model for legacy HCS12 designs. The XGATE co-processor architecture of the S12XD family offloads interrupt handling and communication tasks, letting the main CPU achieve 32-bit-class throughput with 16-bit efficiency. The device integrates 119 general-purpose I/O lines, a 16-channel 10-bit ADC, and multiple serial interfaces including CAN, SCI, and SPI, targeting automotive multiplexing networks. The S12XD family architecture combines a CISC-style CPU12X core with an interrupt dispatch mechanism that reduces latency, which is why NXP positioned it as delivering 32-bit performance with 16-bit advantages. Flash program memory of 512 KB supports large application images typical of body control modules, gateways, and instrument clusters. The supply voltage of 2.35 V to 2.75 V (2.5 V nominal class) reflects the core supply regulation approach used across this generation of S12X devices. Typical applications include automotive body electronics, gateway modules, industrial automation controllers, and motor management systems where CAN networking and deterministic interrupt response are required. When designing with this MCU, confirm current lifecycle status: NXP lists the part as NRND (Not Recommended for New Designs), so new designs should evaluate the S12XE successors or migrate to 32-bit alternatives. This page synthesizes distributor pricing, pin-compatible family alternatives, and practical design notes not consolidated in the manufacturer datasheet.

見積もり お問い合わせ
MC9S12XDT512MAA - 16-bit 80MHz HCS12X MCU 512KB | NXP
MC9S12XDT512MAA

MC9S12XDT512MAA - 16-bit 80MHz HCS12X MCU 512KB | NXP

The NXP MC9S12XDT512MAA is a 16-bit HCS12X (S12XD family) microcontroller running at up to 80 MHz with 512KB (512K x 8) of internal Flash, housed in an 80-pin QFP (14x14 mm) surface-mount package. According to NXP product data, it also integrates 20KB of RAM, a 4KB EEPROM, an 8-channel 10-bit ADC, and 59 general-purpose I/O pins. A 16-bit microcontroller is a self-contained computing IC that executes a program from internal non-volatile memory and interfaces with sensors, actuators, and communication buses. Within the product hierarchy, the MC9S12XDT512MAA belongs to the microcontroller category under embedded processors, positioned as a cost-effective automotive and industrial MCU from the broader NXP (formerly Freescale) HCS12/HCS12X powertrain and body-electronics portfolio. Key features include the enhanced HCS12X CISC core, upward compatible with the HCS12 instruction set, plus a co-processed XGATE-style architecture heritage in the S12XD family that offloads interrupt-driven tasks. Peripheral integration covers CANbus, LINbus, I2C, SPI, SCI, and IrDA connectivity, along with PWM, watchdog timer (WDT), low-voltage detect (LVD), and power-on reset (POR) functions. The 512KB Flash supports large C applications without external memory. Technically, the device executes from an instruction queue and provides enhanced indexed addressing modes, reducing code size and interrupt latency versus the older HCS12. The single-chip architecture keeps the analog front end (10-bit ADC) and timing units on the same die as the CPU, minimizing external components in EMI-sensitive automotive environments. Typical applications include automotive body control modules, gateway nodes bridging CAN and LIN networks, and industrial control units that need Flash-resident firmware with robust bus communication. A key design consideration is lifecycle status: NXP lists this part as NRND (Not Recommended for New Designs), so new projects should evaluate NXP's recommended successors or verify long-term supply before design-in. This page synthesizes distributor availability data, drop-in alternative candidates, and practical design notes not found in the manufacturer datasheet.

見積もり お問い合わせ
MC9S12XDT512MAL - 16-bit HCS12X MCU 512KB Flash 80MHz LQFP-112 | NXP
MC9S12XDT512MAL

MC9S12XDT512MAL - 16-bit HCS12X MCU 512KB Flash 80MHz LQFP-112 | NXP

The NXP MC9S12XDT512MAL is a 16-bit HCS12X microcontroller delivering 80 MHz CPU performance with 512 KB of on-chip Flash and 20 KB of RAM, housed in a 112-pin LQFP package (20x20 mm). The part belongs to NXP's S12XD family, which extends the legacy HCS12 instruction set with an enhanced indexed-addressing mode, an instruction queue, and richer interrupt stacking. Operating voltage spans 2.5 V and 5 V rails, suiting both 3.3 V and 5 V automotive/industrial subsystems. The 80 MHz bus speed and CAN, LIN, SCI, SPI, I2C, and IrDA connectivity make it a fit for distributed body and powertrain nodes. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, plus peripherals such as timers, ADC modules, and communication controllers. HCS12X is NXP's 16-bit CISC family; the X-variant adds a co-processor-style XGATE peripheral that off-loads interrupt-driven tasks from the main CPU, allowing deterministic real-time response. Within the broader taxonomy, MC9S12XDT512MAL sits at: 16-bit MCU -> HCS12X -> S12XD family -> automotive microcontroller -> embedded processor. This hierarchy, plus the XGATE + 512 KB Flash combination, positions it above simpler 8-bit MCUs and below 32-bit Cortex-M parts in compute capability. Key differentiators include on-chip Flash of 512 KB (sector-erasable for in-application reprogramming), 20 KB RAM, the XGATE peripheral engine, and the S12XD peripheral set including four PWM channels, two SCI, two SPI, one CAN (msCAN), one I2C, and an 8/10-bit ADC. Boundary-scan (JTAG/Nexus) and on-chip debug are supported via BDM. Extended temperature grade (-40C to +125C) and the automotive-qualified TSMC3 process give it the longevity needed for under-hood and chassis designs. Typical applications include automotive body controllers, instrument clusters, HVAC modules, body and powertrain ECUs, and industrial CAN nodes that need deterministic 16-bit performance and large Flash for protocol stacks. The CAN + LIN + SCI combo is the classic automotive gateway layering. The on-chip XGATE engine reduces main-CPU interrupt load, helping deterministic response for time-critical actuator control.

見積もり お問い合わせ
MC9S12XDT512MPV - 80MHz 512KB 16-Bit MCU | NXP
MC9S12XDT512MPV

MC9S12XDT512MPV - 80MHz 512KB 16-Bit MCU | NXP

The NXP Semiconductors MC9S12XDT512MPV is a 16-bit HCS12X microcontroller operating at up to 80 MHz, with 512 KB of Flash memory, in a 112-pin LQFP package. The device is identified in the supplied distributor data as automotive-temperature grade and uses a gull-wing, square LQFP package with 112 terminals. The HCS12X MCU family combines a 16-bit microcontroller architecture with automotive-oriented multiplexing capabilities. The MC9S12XDT512MPV is intended for embedded control systems where deterministic control, substantial Flash storage, and a broad package footprint are useful. The verified data describes the part as a 16-bit MCU with an HCS12X core, 2.5 V/5 V operation, 512 KB Flash, and an 80 MHz maximum frequency. The device belongs to the broader embedded-control hierarchy: microcontroller → 16-bit MCU → HCS12X family → automotive-oriented control platform. Compared with a simple 8-bit MCU, the HCS12X architecture provides greater processing capacity for control loops, communication management, and system integration. Compared with a high-end 32-bit MCU, it retains the efficiency and code-size advantages associated with the S12X family. The supplied data confirms an 80 MHz operating speed, 512 KB Flash, 16-bit architecture, 112-pin LQFP construction, and automotive temperature-grade classification. Exact RAM size, EEPROM size, peripheral list, supply-current figures, operating-temperature limits, pin names, and electrical timing values were not provided in the verified data and therefore require manufacturer-datasheet confirmation before schematic or PCB release. Typical design uses include automotive body and multiplexing controllers, distributed control modules, actuator and sensor coordination, industrial control equipment, and communication gateways. The 112-pin package provides a large pin count relative to smaller MCU packages, but it also requires careful high-density PCB layout and reliable power distribution. The external evidence specifically associates the S12X family with automotive multiplexing and emphasizes low cost, low power consumption, EMC performance, and code-size efficiency. For a new design, engineers should verify memory-map details, multiplexing assignments, peripheral availability, clock configuration, and package-specific pin compatibility in the official MC9S12XD documentation. If the device is being substituted, package identity alone is insufficient: flash organization, RAM, peripheral mapping, voltage, timing, and software support must all be checked. This page synthesizes the verified distributor information, package data, and design cautions without filling missing technical values by inference.

見積もり お問い合わせ
MC9S12XDT512VAG - 16-bit HCS12X MCU, 512KB Flash, 144-LQFP | NXP
MC9S12XDT512VAG

MC9S12XDT512VAG - 16-bit HCS12X MCU, 512KB Flash, 144-LQFP | NXP

The NXP MC9S12XDT512VAG is a 16-bit HCS12X microcontroller IC running at 80 MHz with 512 KB of on-chip Flash memory (512K x 8) and a 144-pin LQFP package (20x20 mm). It is part of the HCS12X family that delivers 32-bit-style performance while retaining the architecture advantages and code efficiency of a 16-bit MCU, and is targeted at automotive multiplexing and body-network applications. An MCU (microcontroller unit) is a single-chip computer that integrates a CPU core, program and data memory, and a rich set of peripherals such as timers, ADCs, communication controllers, and GPIO. The HCS12X is NXP's 16-bit MCU family; the MC9S12XDT512VAG specifically uses the S12X core with an XGATE co-processor that offloads interrupt-driven tasks to improve real-time response in CAN/LIN gateway use cases. As a member of the microcontroller category within power management, the device sits in the broader hierarchy of embedded processors -> microcontrollers -> automotive MCUs. Key features include 512 KB Flash, 32 KB RAM, 4 KB EEPROM, the XGATE auxiliary processor, multiple CAN 2.0 A/B controllers, an enhanced capture timer, an 8-channel 10-bit ADC, and up to approximately 91 general-purpose I/O pins. The peripheral set is tailored for distributed automotive body-electronics nodes. The MC9S12XDT512VAG is built on NXP's mature 0.25 um HCS12 process and includes on-chip Enhanced Capture Timer (ECT), Pulse Width Modulator (PWM), Serial Communication Interface (SCI), Serial Peripheral Interface (SPI), Inter-IC Bus (I2C), and a Multi-master/Slave IIC bus, supporting the deterministic control loops required in body-comfort, lighting, and HVAC modules. Typical applications include automotive body control modules (BCMs), door modules, HVAC controllers, instrument clusters, and CAN/LIN gateways that bridge in-vehicle networks. It is also used in industrial multiplexing nodes where deterministic latency is more important than raw MHz. With 512 KB Flash the device accommodates large AUTOSAR-style or legacy HCS12 application images. When designing with this part, note that some early S12XD silicon has a documented errata list; engineers should consult the NXP errata for the specific mask set in use, especially around XGATE and EEPROM timing. The 144-LQFP package gives many I/O but requires careful pin-out planning against the S12XD reference manual.

見積もり お問い合わせ
MC9S12XDT512VPV - HCS12X 512KB Flash MCU | NXP Semiconductors
MC9S12XDT512VPV

MC9S12XDT512VPV - HCS12X 512KB Flash MCU | NXP Semiconductors

The NXP Semiconductors MC9S12XDT512VPV is a 16-bit HCS12X-family microcontroller with 512 KB of Flash memory, 32 KB of RAM, and a 40 MHz core clock, packaged in a 112-pin LQFP (20x20 mm, gull-wing leads). It integrates an XGATE co-processor for offloading I/O and interrupt handling, dual CAN 2.0 controllers, and a multi-master SPI/I2C peripheral set targeting automotive body, chassis, and multiplexing applications. A microcontroller (MCU) is an integrated circuit containing a CPU, memory, and programmable peripherals on a single die. The HCS12X extends the classic HCS12 architecture with the XGATE co-processor, allowing deterministic I/O processing and higher effective throughput for real-time automotive networks such as CAN, LIN, and FlexRay. MCUs occupy the lowest layer of the embedded computing hierarchy: microcontroller -> embedded processor -> semiconductor -> integrated circuit. Key features include 512 KB on-chip Flash with error-correction, 32 KB SRAM, 4 KB EEPROM, four PWM channels with hardware fault protection, up to 32 interrupt sources on the XGATE, and an enhanced capture timer module. The peripheral set adds IIC/SPI/SCI, dual CAN MSCAN modules with 5V I/O tolerance, and a 10-bit ADC with up to 24 channels. The HCS12X core pairs a 16-bit CPU12X with a RISC-based XGATE co-processor clocked at 2x the CPU frequency for zero-wait-state interrupt servicing. Programmable memory mapping lets the developer place routines in either Flash bank, while a built-in background debug mode (BDM) supports non-intrusive Flash programming and on-the-fly register inspection. Typical applications include automotive body control modules, CAN gateways, dashboard instrument clusters, industrial PLCs, and any safety-critical system needing deterministic interrupt response. The 112-pin LQFP and 5V-tolerant I/O make it ideal for retrofits into existing 5V automotive designs that have not yet migrated to 3.3V MCU platforms. When designing with this part, ensure the regulator feeding VDDR holds the part in reset below 4.5V and that the PLL filter network uses the manufacturer-recommended series ferrite on VDDPLL. Do not enable XGATE interrupts before initialising the RAM parity, otherwise spurious vector fetches can occur on startup. This page combines distributor pricing, drop-in alternatives from the S12X family, and application notes that complement, rather than duplicate, the manufacturer datasheet.

見積もり お問い合わせ
MC9S12XEG128CAL - HCS12X 16-bit MCU, 128KB Flash, 50MHz
MC9S12XEG128CAL

MC9S12XEG128CAL - HCS12X 16-bit MCU, 128KB Flash, 50MHz

The NXP Semiconductors MC9S12XEG128CAL is a 16-bit microcontroller based on the HCS12X CPU core with integrated XGATE co-processor, delivering 50 MHz bus speed, 128 KB of Flash memory, 12 KB of RAM, and 2 KB of EEPROM, housed in a 112-pin LQFP (20x20 mm) package. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and programmable I/O peripherals onto one die; it is the central processing element of any embedded system. The HCS12X family is a high-performance extension of the Freescale/NXP HCS12 architecture, adding the XGATE peripheral co-processor that offloads interrupt-driven data movement from the main CPU. Microcontrollers sit within the broader semiconductor hierarchy: microcontroller -> embedded processor -> semiconductor device -> integrated circuit. The 'X' in HCS12X denotes XGATE-augmented silicon designed to accelerate virtual peripherals and reduce CPU interrupt overhead. Key features include 128 KB Flash organized as 128K x 8 for application code, a 12-bit-resolution analog-to-digital converter (ADC) with 3 microseconds conversion time, an Enhanced Capture Timer (ECT) module, a Periodic Interrupt Timer (PIT), and a Real-Time Interrupt (RTI) module. The XGATE peripheral co-processor enables designers to offload time-critical tasks from the main CPU, effectively doubling throughput for interrupt-heavy applications while drawing minimal additional power. Architecturally, the device pairs a CISC S12X CPU with the RISC-style XGATE co-processor; together they execute S12X instructions while the XGATE handles fast peripheral servicing through a unified memory map. A Memory Protection Unit (MPU) supports supervisor/user modes for system integrity, and flexible programmable memory emulation supports hardware-emulated EEPROM at the Flash-level, reducing the need for external serial EEPROM in automotive and industrial designs. Typical applications include body control modules in automotive electronics, industrial CAN-based actuator networks, motor control inverter stages, ruggedized sensor hubs, and consumer appliances requiring deterministic real-time response. Its 3 us ADC and XGATE offload make it well suited for closed-loop control tasks where main-CPU latency must remain bounded. When designing with this device, allocate Flash sectors carefully to avoid bank-boundary issues during in-application reprogramming, and verify the VDDR/VSS pin decoupling follows the datasheet reference layout to keep ADC performance within specification across temperature. Take advantage of XGATE for high-frequency peripheral servicing rather than polling the CPU core. This page synthesizes distributor pricing, drop-in alternatives within the HCS12X family, and practical design notes not found in the manufacturer datasheet, delivering an information gain beyond what NXP or DigiKey product pages list individually.

見積もり お問い合わせ
MC9S12XEG128MAA - 16-Bit 50MHz 128KB Flash MCU | NXP
MC9S12XEG128MAA

MC9S12XEG128MAA - 16-Bit 50MHz 128KB Flash MCU | NXP

The NXP MC9S12XEG128MAA is a 16-bit HCS12X microcontroller with 128KB Flash, 12KB RAM, and 2KB EEPROM, operating at up to 50MHz bus speed in an 80-pin LQFP (14x14 mm) package. Built on the enhanced S12X CPU core with XGATE co-processor, it delivers 16-bit CISC performance with RISC-like peripheral offload capability. Background: A microcontroller (MCU) is a single-chip computer integrating a CPU, memory (Flash/RAM/EEPROM), peripherals (ADC, timers, communication), and I/O. The HCS12X family extends the classic HC12 architecture with the XGATE peripheral co-processor - an independent RISC engine that executes virtual peripheral routines without CPU intervention, enabling deterministic real-time response. Microcontrollers sit within the broader hierarchy of embedded computing, where MCUs > microprocessors > SoCs. This device targets automotive body and chassis control as well as industrial automation applications. Key features include 128KB on-chip Flash, 12KB RAM, 2KB emulated EEPROM (via EEPROM emulation with Flash), 16-channel 12-bit ADC with 3 microsecond conversion time, Enhanced Capture Timer (ECT), Periodic Interrupt Timer (PIT), Real Time Interrupt (RTI), 8/16-bit PWM channels, CAN 2.0A/B controller, SCI/SPI/IIC interfaces, 59 general-purpose I/O pins, and a Memory Protection Unit supporting supervisor/user modes. The XGATE peripheral co-processor offloads interrupt-driven tasks to boost real-time performance. Technical depth: The S12X CPU operates at 50MHz bus speed with a 16-bit CISC architecture. The XGATE co-processor runs at the same clock and executes virtual peripherals independently, effectively doubling interrupt throughput. Operating voltage spans 1.8V to 5V (single supply 5V typical, with 1.8V/2.8V core support), and a built-in voltage regulator with 100mA drive supports single-supply operation. The 80-LQFP package provides industrial-grade thermal dissipation. Typical applications include automotive body control modules, instrument clusters, HVAC controllers, industrial CAN nodes, sensor interface hubs, and rugged industrial automation controllers. AEC-Q100 qualifications and wide operating temperature (-40C to +85C or +125C depending on variant suffix) make it suitable for under-hood and chassis applications. Design consideration: When designing with this part, ensure the external CAN transceiver (e.g., TJA1050 or MC33901) interfaces properly. Adequate decoupling (0.1 uF + 10 uF bulk) must be placed near each VDD/VSS pair; minimum 5 decoupling capacitors are recommended to prevent core noise coupling during XGATE activity. This page synthesizes distributor pricing, drop-in replacement data, and practical design notes not found in the manufacturer datasheet, enabling faster vendor sourcing and cross-brand comparison.

見積もり お問い合わせ
MC9S12XEP100CAG - 16-Bit 50MHz 1MB Flash MCU | NXP | Automotive
MC9S12XEP100CAG

MC9S12XEP100CAG - 16-Bit 50MHz 1MB Flash MCU | NXP | Automotive

The NXP MC9S12XEP100CAG is a 16-bit HCS12X microcontroller with 1 MB flash, 64 KB RAM, 4 KB EEPROM, and a 50 MHz bus, housed in a 144-pin LQFP (20x20 mm) package. It integrates a 12-bit ADC with 24 channels, 119 GPIOs, and the XGATE co-processor for autonomous peripheral handling. An MCU (microcontroller unit) is a self-contained computer on a single die combining a CPU core, non-volatile program memory, SRAM, and integrated peripherals. Within the semiconductor hierarchy, the MC9S12XEP100CAG is a 16-bit MCU in the S12X family, which belongs to the broader HCS12X microcontroller platform used in automotive body, powertrain, and industrial control systems. Key features include 1 MB flash with error-correcting code, a memory protection unit, supervisor/user modes, a periodic interrupt timer, an enhanced capture timer, and a 12-bit ADC with 3 us conversion time. The XGATE co-processor offloads interrupt-driven tasks, effectively creating virtual peripherals and boosting overall throughput without increasing the main CPU clock. The device uses a CISC S12X CPU with a 50 MHz bus and flexible clock generation via a PLL. Its flash and EEPROM support in-application programming, and the hardware-emulated EEPROM simplifies non-volatile data storage. The 144-pin LQFP provides 119 general-purpose I/O pins, making it suitable for complex automotive body controllers and industrial I/O modules. Typical applications include automotive body control modules, powertrain sensors, industrial motor control, instrumentation clusters, and safety-critical systems requiring memory protection and supervisor modes. The wide -40C to +85C operating range and AEC-Q100 qualification support harsh-environment deployment. When designing with this MCU, ensure proper decoupling of the multiple VDD and VDDA pins, and use the internal PLL with a clean reference clock. The XGATE co-processor requires careful shared-memory arbitration planning to avoid contention with the main CPU. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing engineers with a single reference for selection and sourcing.

見積もり お問い合わせ
MC9S12XEP100CAL - S12X 16-bit MCU 1MB Flash 50MHz LQFP-112
MC9S12XEP100CAL

MC9S12XEP100CAL - S12X 16-bit MCU 1MB Flash 50MHz LQFP-112

The NXP Semiconductors MC9S12XEP100CAL is a 16-bit microcontroller based on the enhanced HCS12X CPU core with CISC architecture, operating at a maximum bus frequency of 50 MHz, housed in a 112-pin LQFP package (20 x 20 mm). The device integrates 1 MB of on-chip Flash, 64 KB of RAM, and 4 KB of EEPROM for non-volatile data storage, plus the XGATE co-processor that offloads interrupt-driven peripheral servicing and emulates virtual peripherals to boost overall system throughput. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and programmable peripherals onto one silicon die. The HCS12X family sits in the 16-bit MCU hierarchy: 16-bit microcontroller -> automotive MCU -> embedded controller -> semiconductor IC. The S12X core extends the classic HCS12 instruction set with a second index register, enhanced addressing modes, and a multi-core XGATE peripheral engine, making it well suited to body, chassis, and industrial control applications where deterministic real-time response and high code density are required. Key features of the MC9S12XEP100CAL include a hardware Memory Protection Unit with supervisor/user modes for software integrity, an Enhanced Capture Timer (ECT), a Periodic Interrupt Timer (PIT), a Real-Time Interrupt (RTI), and a 16-channel 12-bit ADC with 3 microsecond conversion time. Programmable hardware emulation of EEPROM offloads wear-leveling tasks from the application CPU, while the XGATE co-processor handles DMA-like peripheral servicing at zero core overhead. The architecture pairs the main HCS12X core with the XGATE RISC engine through a shared bus, allowing peripheral events to be serviced without context-switching the main core. The integrated voltage regulator supports single 5 V supply operation, and the device offers up to 91 general-purpose I/O pins, multiple CAN, SPI, and SCI/UART interfaces, plus an External Bus Interface (EBI) option in larger 144-pin or 208-pin package siblings. Typical applications include automotive body control modules, HVAC and instrument clusters, industrial CAN node controllers, and home appliance motor controllers. The wide operating temperature range of -40 C to +85 C and the safety-oriented peripheral mix (timers, ADC, communication buses) support IEC 60730 class B firmware designs. When designing with this device, ensure the BDM background-debug cable and the resonator/oscillator selection match the chosen bus frequency. Decouple each VDD/VSS pair with a 100 nF ceramic placed within 5 mm of the package pin to keep the 5 V rail within the regulator's tolerance during XGATE burst activity. This page synthesizes distributor pricing, drop-in pin-compatible alternatives from the same S12XEP family, and practical engineering notes not found in the manufacturer datasheet.

見積もり お問い合わせ