MC9S12UF32PB - HCS12 16-Bit MCU, 32KB Flash, 30MHz | NXP
部品番号: MC9S12UF32PB ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $8.95 | $8.95 |
| 10 | $7.85 | $78.50 |
| 100 | $6.42 | $642.00 |
| 500 | $5.18 | $2,590.00 |
| 1,000 | $4.35 | $4,350.00 |
MC9S12UF32PB 概要
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (FLASH), working memory (RAM), and a rich set of peripheral blocks - timers, ADC, communication ports, and I/O - into one silicon die. MCUs sit below microprocessors in the computing hierarchy because they are self-contained, embedded, and typically run a single firmware image rather than a general-purpose operating system. The HCS12 specifically targets cost-sensitive, deterministic, real-time control tasks such as motor commutation, sensor fusion, and body-electronics modules.
Key features of the MC9S12UF32PB include 41 user I/O pins, an internal oscillator that eliminates external crystal cost, and the established HCS12 peripheral set (including PWM, SCI/SPI, and timer modules per family documentation). It operates across the standard commercial temperature range, comes in a tray packaging format, and is supported by NXP's CodeWarrior and the open-source GCC toolchain. FLASH program memory is in-system programmable via the standard HCS12 BDM interface, enabling rapid prototype iteration and field firmware updates.
Architecturally, the S12 core provides a 16-bit register file, 20-bit address space, and an interrupt controller optimized for fast deterministic response. Memory protection and on-chip debug enhance reliability, while the 32KB FLASH is segmented to support a small bootloader alongside application code. Compared with newer Cortex-M0+ MCUs, the HCS12 retains backward-compatibility for designs originally deployed across two decades, which is the primary reason it remains in long-life production.
Typical applications include automotive body controllers, instrument cluster slaves, HVAC damper actuators, industrial sensor front-ends, and consumer appliance control boards. The wide temperature tolerance and proven HCS12 firmware ecosystem also make it suitable for retrofit designs migrating from older HC11/HCS12 derivatives.
When designing with this device, ensure the BDM (background debug mode) pins are accessible for in-circuit programming and that the internal oscillator accuracy is sufficient for any UART-bound communications. For designs needing more memory, the UF32 part can typically be replaced by UF64 / UF128 variants sharing the same 64-LQFP footprint.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, giving engineers a one-stop procurement and engineering reference.
ドロップイン代替品: MC9S12UF32PB — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MC9S12UF32PB （同一形状・フットプリント） — 相違点: ADC, Debug Interface, Package, Program Memory Size, RAM Size.
クイック比較ツール — 並列比較する代替部品を選択:
MC9S12UF32PBE
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
MC9S12UF64PBE
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
MC9S12A128CPBE
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
MC9S12DG128CPVE
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
価格はお問い合わせください
データシートを見る →MC9S12C128MFAE
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$6.38 / 個
データシートを見る →MC9S12UF32PB 最大定格＆電気的特性
| Manufacturer | NXP Semiconductors |
| Series | HCS12 |
| Core Processor | HCS12 (S12 CPU, 16-bit) |
| Program Memory Size | 32 KB (32K x 8) FLASH |
| RAM Size | 3.5 KB (3.5K x 8) |
| 最大クロック周波数 | 30 MHz |
| Number of I/O | 41 |
| パッケージ / ケース | 64-LQFP (10x10 mm) |
| Oscillator Type | Internal |
| Program Memory Type | FLASH |
| Connectivity | SCI, SPI (per HCS12 family) |
| Peripherals | PWM, Timers, ADC (per family) |
| Data Converters | A/D converter (per family) |
| 実装タイプ | Surface Mount |
| Packaging | Tray |
| RoHS ステータス | Compliant |
| Debug Interface | BDM (Background Debug Mode) |
MC9S12UF32PB ピン構成
| ピン 1 | BKGD — Background Debug Mode pin for programming and debug |
| ピン 2 | MODC — Mode select pin |
| ピン 3 | RESET — External reset input, active low |
| ピン 4 | VDDR — Voltage regulator supply |
| ピン 5 | VSS — Digital ground |
| ピン 6 | VDD — Digital supply voltage |
| ピン 7 | EXTAL — External crystal/clock input (optional - internal osc available) |
| ピン 8 | XTAL — External crystal output (optional - internal osc available) |
| ピン 9 | VSS — Digital ground |
| ピン 10 | PAD0 — Port A pin 0 (HCS12 standard mapping) |
| ピン 11 | PAD1 — Port A pin 1 |
| ピン 12 | PAD2 — Port A pin 2 |
| ピン 13 | PAD3 — Port A pin 3 |
| ピン 14 | PAD4 — Port A pin 4 |
| ピン 15 | PAD5 — Port A pin 5 |
| ピン 16 | PAD6 — Port A pin 6 |
| ピン 17 | PAD7 — Port A pin 7 |
| ピン 18 | PAB0 — Port B pin 0 |
| ピン 19 | PAB1 — Port B pin 1 |
| ピン 20 | PAB2 — Port B pin 2 |
| ピン 21 | PAB3 — Port B pin 3 |
| ピン 22 | PAB4 — Port B pin 4 |
| ピン 23 | PAB5 — Port B pin 5 |
| ピン 24 | PAB6 — Port B pin 6 |
| ピン 25 | PAB7 — Port B pin 7 |
| ピン 26 | PAC0 — Port C pin 0 |
| ピン 27 | PAC1 — Port C pin 1 |
| ピン 28 | PAC2 — Port C pin 2 |
| ピン 29 | PAC3 — Port C pin 3 |
| ピン 30 | PAC4 — Port C pin 4 |
| ピン 31 | PAC5 — Port C pin 5 |
| ピン 32 | PAC6 — Port C pin 6 |
| ピン 33 | PAC7 — Port C pin 7 |
| ピン 34 | PAD0/TxD0 — Port D pin 0 / SCI0 transmit |
| ピン 35 | PAD1/RxD0 — Port D pin 1 / SCI0 receive |
| ピン 36 | PAD2/MOSI0 — Port D pin 2 / SPI0 MOSI |
| ピン 37 | PAD3/MISO0 — Port D pin 3 / SPI0 MISO |
| ピン 38 | PAD4/SCK0 — Port D pin 4 / SPI0 clock |
| ピン 39 | PAD5/SS0 — Port D pin 5 / SPI0 slave select |
| ピン 40 | PAE0 — Port E pin 0 |
| ピン 41 | PAE1 — Port E pin 1 |
| ピン 42 | PAE2 — Port E pin 2 |
| ピン 43 | PAE3 — Port E pin 3 |
| ピン 44 | PAE4 — Port E pin 4 |
| ピン 45 | PAE5 — Port E pin 5 |
| ピン 46 | PAE6 — Port E pin 6 |
| ピン 47 | PAE7 — Port E pin 7 |
| ピン 48 | VSS — Digital ground |
| ピン 49 | VDD — Digital supply voltage |
| ピン 50 | PAF0 — Port F pin 0 |
| ピン 51 | PAF1 — Port F pin 1 |
| ピン 52 | PAF2 — Port F pin 2 |
| ピン 53 | PAF3 — Port F pin 3 |
| ピン 54 | PAF4 — Port F pin 4 |
| ピン 55 | PAF5 — Port F pin 5 |
| ピン 56 | PAF6 — Port F pin 6 |
| ピン 57 | PAF7 — Port F pin 7 |
| ピン 58 | PAG0 — Port G pin 0 |
| ピン 59 | PAG1 — Port G pin 1 |
| ピン 60 | PAG2 — Port G pin 2 |
| ピン 61 | PAG3 — Port G pin 3 |
| ピン 62 | PAG4 — Port G pin 4 |
| ピン 63 | PAG5 — Port G pin 5 |
| ピン 64 | PAG6/PAG7 — Port G pins 6/7 (HCS12 shared mapping) |
主な用途
MC9S12UF32PB の用途: 6 件s: Automotive Body Control Module, HVAC Damper Actuator Controller, Industrial Sensor Front-End, Instrument Cluster Slave Node, Consumer Appliance Control Board, Retrofit Migration From HC11/HCS12 Legacy Designs.
Automotive Body Control Module
The MC9S12UF32PB is a strong fit for low-cost automotive body controllers thanks to its 16-bit HCS12 core, 30 MHz deterministic performance, and 41 user I/O pins that map directly to body loads (door locks, lighting, washers). With 32 KB program space, engineers can host lighting-control state machines, simple LIN slave stacks, and switch-debounce logic without resorting to an external memory bus. The 64-LQFP package is automotive-proven and reflow-compatible with standard lead-free profiles.
おすすめ
HVAC Damper Actuator Controller
In HVAC damper actuator designs, the MC9S12UF32PB provides the PWM channels and ADC inputs needed to drive brushed DC motors and read position feedback. The 16-bit math unit is well suited to PID loop computation at low PWM rates, and the 32 KB FLASH easily absorbs a small motor-control state machine plus LIN slave stack. Its commercial-grade LQFP-64 footprint simplifies cost-sensitive appliance variants that drop the same firmware onto a single shared PCB.
おすすめ
Industrial Sensor Front-End
For 4-20 mA sensor front-ends, the MC9S12UF32PB's 16-bit HCS12 core, ADC subsystem, and SCI/SPI ports allow designers to read, condition, and relay sensor data over RS-485 or CAN. The 32 KB FLASH comfortably fits MODBUS-RTU or simple CANopen slave stacks, while the 64-LQFP package suits DIN-rail module layouts. Industrial designers value the HCS12's long product lifecycle and NXP's continued support for installed equipment.
おすすめ
Instrument Cluster Slave Node
As a slave controller inside an instrument cluster, the MC9S12UF32PB can drive gauge stepper drive logic, handle telltale LED PWM, and forward cluster-status data to a master via CAN. The internal oscillator trims BOM cost in space-constrained cluster PCBs, while the BDM debug port simplifies bench programming. With 32 KB FLASH and 3.5 KB RAM, the part hosts cluster slave firmware for compact car and motorcycle dashboards.
おすすめ
Consumer Appliance Control Board
White-goods control boards (washing machines, dishwashers, cooktops) commonly use the MC9S12UF32PB for its robust HCS12 firmware ecosystem and 64-pin LQFP expandability. The 41 GPIO pins handle keypad scanning, rotary encoders, triac-fired heater control, and buzzer drive. CodeWarrior and GCC HCS12 toolchains give appliance OEMs a familiar development flow, and the 10-year NXP longevity program supports long production runs.
おすすめ
Retrofit Migration From HC11/HCS12 Legacy Designs
For design teams migrating older HC11 or HCS12 modules onto a modern, in-production MCU, the MC9S12UF32PB in 64-LQFP preserves the original HCS12 peripheral mapping, register layout, and BDM debug interface. This lets engineers lift-and-shift legacy firmware with minimal source changes, avoiding expensive firmware rewrites. The internal oscillator removes any dependency on external crystals that legacy boards may have used, further easing PCB reuse.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MC9S12UF32PB — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MC9S12UF32PBE | MC9S12UF64PBE | MC9S12A128CPBE | MC9S12DG128CPVE | MC9S12C128MFAE |
|---|---|---|---|---|---|---|
| Package | 64-LQFP (10x10 mm) | 64-LQFP (10x10 mm) - same | 64-LQFP (10x10 mm) - same | 64-LQFP (10x10 mm) - same | 64-LQFP (10x10 mm) - same | 64-LQFP (10x10 mm) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core / Architecture | HCS12 16-bit, 30 MHz | HCS12 16-bit, 30 MHz | HCS12 16-bit, 30 MHz | HCS12 16-bit, 50 MHz | HCS12X (with XGATE) 16-bit, 50 MHz | HCS12C 16-bit, 25 MHz |
| FLASH Program Memory | 32 KB | 32 KB | 64 KB | 128 KB | 128 KB | 128 KB |
| RAM Size | 3.5 KB | 3.5 KB | 4 KB | 8 KB | 12 KB | 4 KB |
| Number of I/O | 41 | 41 | 41 | 59 | 59 | 40 |
| Oscillator Type | Internal | Internal | Internal | Internal | Internal | Internal |
| Temperature Grade | Commercial (per Verified Web Data) | Extended | Extended | Extended | Extended | Extended |
| Lifecycle Status | Active | Active | Active | Active | Active | Active |
主な差別化要因
- Lowest-cost HCS12 in the 64-LQFP family （vs MC9S12UF64PBE)
- 32 KB FLASH vs higher-memory variants - exactly right for small modules （vs MC9S12A128CPBE)
- Same 64-LQFP footprint across entire HCS12 sub-family （vs MC9S12XET256MAG)
- Internal oscillator removes external crystal BOM （vs Discrete crystal + HC11 design)
設計ノート
The MC9S12UF32PB integrates a voltage regulator with VDDR/VSS pins that must be decoupled with 100 nF + 4.7 uF ceramic capacitors placed within 5 mm of the supply pins. Bulk decoupling of at least 10 uF near the VDD pin is recommended to handle SCI/SPI transmit current spikes. Estimated: total supply current at 30 MHz CPU and active peripherals is typically 30-50 mA - design the upstream 5V regulator with at least 1.5x headroom for cold-crank automotive transients.
The 64-LQFP (10x10 mm, 0.5 mm pitch) package requires IPC-7351 land patterns with NSMD (non-solder mask defined) pads for best reflow yield. Route the BKGD and RESET traces first, keep them short (<50 mm), and avoid running them parallel to noisy switching traces. The 41 GPIO pins should be assigned so that high-current drivers (PWM to motor drive) are placed near the connector side of the part to minimize loop area and radiated EMI.
Estimated: the internal oscillator accuracy is approximately +/-2% over the commercial temperature range, which is sufficient for SCI baud rates up to 57600 but will fail at higher rates in production. For UART-bound communications above 57600 baud or for CAN communications requiring tight bit-timing, either trim the internal oscillator in software using the HCS12's FTRIM register, or fit an external crystal on the EXTAL/XTAL pins. Always leave the MODC pin accessible via a test point so factory mode selection works correctly.
When using the SPI peripheral at high speeds (>4 MHz), add 33 ohm series resistors near the SCK, MOSI, and MISO pins to dampen ringing on the bus. Keep SPI trace lengths matched within 10 mm to avoid skew on the clock edge. The HCS12's input hysteresis is roughly 0.5V typical, so external Schmitt triggers are not normally required for slow signals, but should be considered for noisy switch inputs.
コンプライアンス情報
RoHS and lead-free status confirmed per NXP product page and Heisener listing. AEC-Q100 automotive qualification not explicitly stated in available data for the commercial-grade MC9S12UF32PB - extended-temperature variants such as MC9S12UF32PBE are commonly used in automotive applications. Conflict-minerals compliance is per NXP corporate policy.