マイクロコントローラ

製品 (20,000+)

P1014NXN5HFA - QorIQ P1 800MHz PowerPC e500v2 MPU | NXP
P1014NXN5HFA

P1014NXN5HFA - QorIQ P1 800MHz PowerPC e500v2 MPU | NXP

The NXP P1014NXN5HFA is a QorIQ P1 communications processor built on the PowerPC e500v2 core, running at up to 800 MHz with a 32-bit architecture, packaged in a 425-TEPBGA I (19x19 mm) thermally-enhanced plastic BGA. Per the NXP QorIQ P1010/P1014 product family datasheet, this SoC integrates USB, SATA, Gigabit Ethernet, PCIe, SEC crypto acceleration, and a DDR3 memory controller, targeting cost- and power-sensitive embedded networking and industrial applications. A communications SoC (System-on-Chip) is an integrated circuit that consolidates a CPU core, memory controller, and multiple peripheral interfaces onto a single die. The P1014 belongs to the QorIQ P1 tier of NXP's QorIQ family, which evolved from the PowerQUICC line and is built on Power Architecture technology. Within the broader hierarchy, it sits between low-cost microcontrollers and high-performance Layerscape processors, optimized for fanless industrial gateways, routers, and control-plane tasks. Key features of the P1014NXN5HFA include an 800 MHz e500v2 core, hardware-accelerated SEC security block, dual GbE MACs, three PCIe Gen 2 controllers, two SATA interfaces, two USB 2.0 ports, a DDR3/DDR3L memory controller with ECC support, and an extended-temperature grade of -40C to +105C. The 45 nm process technology provides a balanced power/performance envelope for embedded networking workloads without active fans. The architecture combines a single-threaded e500v2 execution core with a coherent system bus connecting to the platform's peripheral IP. The integrated SEC block offloads cryptographic operations such as AES, DES, SHA, and Kasumi, while the DDR3 controller with ECC supports memory reliability for industrial and networking deployments. The integrated communication interfaces reduce external component count, BOM cost, and PCB complexity. Typical applications include industrial Ethernet gateways, factory-automation controllers, secure routers and firewalls, telecom control-plane processors, networked printers, smart-grid edge nodes, and small-form-factor NAS/SAN appliances. The extended temperature range enables deployment in harsh industrial environments without thermal derating. When designing with the P1014NXN5HFA, ensure proper thermal management using the thermal pad exposed on the bottom of the 425-TEPBGA package, and follow NXP's hardware design guide for DDR3 trace length matching and PCIe reference clock routing to avoid signal-integrity issues. This page synthesizes distributor pricing, same-family NXP alternatives (P1014NXN5HFB, P1024NXN5HFA, P1010NXN5HFA), and practical design notes not consolidated in the manufacturer datasheet alone.

見積もり お問い合わせ
P1014NXN5HHA557 - 800MHz QorIQ P1 MPU, 32-Bit PowerPC | NXP
P1014NXN5HHA557

P1014NXN5HHA557 - 800MHz QorIQ P1 MPU, 32-Bit PowerPC | NXP

The NXP P1014NXN5HHA557 is a 32-bit PowerPC e500v2 microprocessor from the QorIQ P1 family, integrating a single core running at 800 MHz and housed in a 425-terminal TEPBGA-I (19x19) package. The device targets power-sensitive embedded networking and industrial control applications, combining an integrated L1/L2 cache hierarchy with low-power operating modes. A microprocessor (MPU) is the central processing unit of an embedded system, integrating one or more CPU cores, cache, memory controllers, and a wide variety of peripheral interfaces on a single die. Within the embedded taxonomy, an MPU sits below a microcontroller (which typically adds on-chip flash and a smaller pin count) and above a discrete CPU + chipset combination, and it is commonly classified under the broader semiconductor / integrated circuit hierarchy. The QorIQ P1 series extends this hierarchy into the communications-processing segment, with the P1014 positioned as a low-power, single-core member for fanless or thermconstrained designs. Key features of the P1014NXN5HHA557 include a 32-bit e500v2 core with hardware double-precision floating-point support, integrated 32 KB L1 instruction and data caches, a 256 KB L2 cache, dual Gigabit Ethernet controllers with hardware acceleration, and DDR3/DDR3L memory controller support. The 800 MHz core delivers strong single-thread performance while the low-power design keeps typical power dissipation well below 1 W for thermally constrained enclosures. The P1014 architecture combines an out-of-order execution pipeline with a coherent crossbar fabric, allowing efficient on-chip traffic between the core, L2 cache, and integrated peripherals. NXP's proven e500v2 core and TEPBGA-I package provide robust thermal performance for industrial-grade environments, and the device supports multiple boot options including NAND flash, SPI, and SD/MMC interfaces. Typical applications include industrial gateways, networked printers, factory automation controllers, smart-grid energy management systems, and low-end LTE/4G small-cell base stations where the combination of Gigabit Ethernet, hardware crypto, and low power dissipation is highly valued. Designers should plan for a multi-rail power architecture and follow NXP's reference PCB layout for the TEPBGA-I package, paying particular attention to the high-speed DDR3 routing constraints and thermal dissipation through the package's thermal balls. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

見積もり お問い合わせ
P1015NXN5DFB - QorIQ P1 667MHz PowerPC e500v2 MPU | NXP
P1015NXN5DFB

P1015NXN5DFB - QorIQ P1 667MHz PowerPC e500v2 MPU | NXP

The NXP P1015NXN5DFB is a single-core QorIQ P1 communications processor built on Power Architecture e500v2 technology, operating up to 667 MHz, and housed in a 561-pin TEPBGA I (23x23 mm) extended-temperature package. It integrates GbE controllers, DDR3 with ECC memory controller, PCIe, USB 2.0, and TDM interfaces for space-constrained networking and industrial designs. A communications processor (often called a networking SoC or communications MPU) is a specialized microprocessor that combines general-purpose CPU cores with high-bandwidth I/O peripherals and protocol accelerators for packet processing. QorIQ P1 parts sit in the hierarchy: communications processor -> embedded MPU -> microprocessor -> integrated circuit, with NXP positioning them below the P2/P4 multi-core families and above the older PowerQUICC II/III lines. The P1 family emphasizes extreme integration for fanless, low-power designs. Key features include a single e500v2 core with 32 KB I-cache and 32 KB D-cache, a 32-bit DDR3 SDRAM controller supporting up to 800 MT/s with ECC, three 10/100/1000 Mb/s Enhanced Three-Speed Ethernet (eTSEC) controllers with integrated PHYs, two PCI Express interfaces, USB 2.0 (host/device/OTG), four TDM interfaces, SPI, I2C, UART, and a security engine with XOR acceleration. The device operates across -40C to +125C industrial temperature range. The P1015NXN5DFB utilizes a 45 nm process technology delivering low power dissipation while sustaining 667 MHz operation. Its integrated peripherals eliminate the need for companion bridge chips, reducing BOM cost and PCB area. The 561-TEPBGA package exposes high-speed SerDes lanes with dedicated power/ground islands for signal integrity. Typical applications include industrial Ethernet switches, edge routers, factory automation controllers, defense communications equipment, smart grid substation gateways, and telecom access platforms. The wide -40C to +125C range makes it suitable for hardened outdoor installations. When designing with this device, allocate adequate PCB layers (minimum 8 layers) for SerDes routing, and use the DDR3 controller's fly-by topology for memory. Consult the NXP hardware reference manual for thermal management; the 561-TEPBGA requires careful PCB land pattern design and Xilinx-grade BGA assembly expertise. This page synthesizes distributor pricing, lifecycle data, and drop-in alternatives not found on the NXP product page, helping engineers assess obsolescence risk and procurement options for this QorIQ P1 communications processor.

見積もり お問い合わせ
P1015SSE5FFB - QorIQ P1015 533MHz e500v2 SoC, 561-TEPBGA | NXP
P1015SSE5FFB

P1015SSE5FFB - QorIQ P1015 533MHz e500v2 SoC, 561-TEPBGA | NXP

The NXP (formerly Freescale) P1015SSE5FFB is a QorIQ P1 family communications processor built on the Power Architecture e500v2 core, running at 533 MHz with a 256 KB L2 cache, integrated into a 561-pin TEPBGA package (23 mm x 23 mm). The device integrates a GbE controller, DDR3 memory controller with ECC, PCIe, USB, TDM, and SEC (Security Engine) peripherals, targeting networking, telecom, and defense applications. A QorIQ communications processor is a system-on-a-chip (SoC) that combines one or more Power Architecture CPU cores with high-speed networking peripherals, memory controllers, and security accelerators on a single die. The P1 family sits in NXP's mid-range networking tier, below the P2/P3 multi-core devices, and is used as a control-plane processor in routers, switches, and wireless base stations. The 'QorIQ' name was introduced when Freescale transitioned the PowerQUICC product line to Power Architecture cores. Key features include a 32-bit PowerPC e500v2 core at 533 MHz, hardware cryptography (SEC 3.x), 32-bit DDR3 with ECC support, integrated three-port GbE switch, two PCI Express controllers, two USB 2.0 controllers (host + device), DUART, eSDHC, SPI, I2C, and TDM interfaces. The 561-TEPBGA package exposes all peripherals and provides ample signal integrity for GbE and PCIe at industrial temperature (0 to 105 C, suffix SE5 indicates 'Standard Temperature, Enhanced security, Rev 1.x, 533 MHz speed bin'). Architecturally, the P1015SSE5FFB uses a single e500v2 core with a 7-stage pipeline, Book-E MMU, and signal-processing extensions. The on-chip SEC block accelerates DES/3DES, AES, SHA-1/2, RSA, and public-key operations, offloading IPsec and TLS tasks from the CPU. The integrated three-port Gigabit Ethernet switch (with classification and QoS hardware) removes the need for an external GbE switch in small-port-count designs, lowering BOM cost for entry-level routers and CPE devices. Typical applications include industrial routers and gateways, Ethernet switches, network appliances, defense and aerospace embedded computing, smart-grid communications, factory-floor IoT aggregation, and secure VPN concentrators. The device's hardware encryption engine makes it particularly attractive for IPsec tunnel termination in branch-office VPN appliances. When designing with the P1015SSE5FFB, ensure the 533 MHz speed bin is sufficient for your packet-forwarding workload, and confirm DDR3-800/1066 trace lengths meet the data-sheet routing rules. The 561-TEPBGA package requires multi-layer PCB with buried vias for breakout routing; plan for at least an 8-layer stack-up with controlled-impedance Ethernet and PCIe pairs. This page synthesizes distributor pricing, drop-in pin-compatible alternatives across the QorIQ P1 family, application notes, and practical layout guidance beyond what is found in the bare manufacturer datasheet, helping engineers select the right P1015 speed bin and verify second-source availability.

見積もり お問い合わせ
P1020NSE2FFB - QorIQ P1 Dual-Core 800MHz SoC | NXP Semiconductors
P1020NSE2FFB

P1020NSE2FFB - QorIQ P1 Dual-Core 800MHz SoC | NXP Semiconductors

The NXP (formerly Freescale) P1020NSE2FFB is a QorIQ P1 series dual-core communications processor built on Power Architecture e500v2 cores, running at 800 MHz, and housed in a 689-pin TEBGA II (31x31 mm) package with exposed thermal pad for high-power networking applications. The P1 platform series delivers up to 2.4 GHz of combined compute, with integrated peripherals for unified networking and industrial workloads. A QorIQ communications processor is a multicore system-on-chip designed by NXP for routers, switches, WAN optimization, and industrial control. It typically integrates CPU cores, a high-bandwidth system bus, DDR memory controller, Ethernet MACs, PCIe, USB, security engines, and TDM interfaces, replacing multiple discrete components on legacy PowerQUICC designs. The QorIQ P1 sits within the broader Power Architecture / PowerQUICC family hierarchy (e500v2 core -> dual-core SoC -> QorIQ P1 platform -> Power Architecture networking SoC -> embedded processor). Key features include dual e500v2 cores at 667/333/667 MHz core-to-platform ratios, DDR2/DDR3 memory controller with ECC, GbE interfaces, integrated SEC security engine, PCIe, USB 2.0, and TDM. Operating temperature spans 0C to 125C junction, making the part suitable for industrial and networking environments with elevated ambient temperatures. The architecture combines high-throughput on-chip interconnect, dual-issue in-order execution cores, and a flexible peripheral set. The 45 nm process enables tighter power budgets versus prior PowerQUICC III devices. According to NXP product literature, P1020 series parts support hardware-accelerated encryption, QoS queues, and pattern matching for deep-packet inspection at line rate. Typical applications include multiservice routers, industrial gateways, defense and aerospace controllers, factory automation nodes, secure VPN appliances, and LTE/WiMAX base-station control planes. The combination of two cores plus integrated GbE MACs makes it well-suited for fan-out on a backplane while the SEC engine handles IPsec without burdening the cores. Design considerations include robust thermal dissipation due to the 31x31 mm BGA exposed pad, careful signal-integrity work for DDR3 at 667 MHz, and provision for boot ROM and NAND flash for secure boot chains. Power sequencing of the 1.0 V core and 1.5/1.8 V DDR rails must follow the reference manual to avoid I/O damage. This page consolidates distributor pricing, drop-in alternatives from the same QorIQ P1 family, and practical design considerations not assembled in a single place on the manufacturer datasheet.

見積もり お問い合わせ
P1020NSN2FFB - QorIQ P1020 667MHz Dual-Core SoC | NXP
P1020NSN2FFB

P1020NSN2FFB - QorIQ P1020 667MHz Dual-Core SoC | NXP

The NXP P1020NSN2FFB is a QorIQ P1 platform Power Architecture 32-bit system-on-chip featuring two e500v2 cores running at up to 667 MHz, integrated into a 689-pin TEPBGA II (31x31 mm) package. The device integrates dual Gigabit Ethernet controllers, DDR2/DDR3 memory controller with ECC support, PCIe interfaces, USB 2.0, TDM, and security engines on a single 45 nm die, targeting cost-sensitive networking applications. A QorIQ communications processor is a system-on-chip that combines one or more Power Architecture CPU cores with high-speed networking peripherals, security accelerators, and memory/IO controllers on a single die. As part of the broader QorIQ family (P1, P2, P3, P4 series), the P1 platform targets entry-level to mid-range networking and industrial equipment. The hypernym hierarchy is: SoC -> microprocessor -> communications processor -> networking SoC. The P1020NSN2FFB is pin-compatible with other members of the QorIQ P1 series, enabling scalable product designs from single-core (P1011) to dual-core (P1020) configurations on the same PCB. Key features of the P1020NSN2FFB include dual 667 MHz e500v2 cores with 32 KB L1 instruction and data caches per core, a 256 KB shared L2 cache with ECC, hardware cryptography acceleration, four Gigabit Ethernet ports with MACsec support, three PCIe Gen 1 controllers, two USB 2.0 controllers (host and device), TDM interface for legacy telecom, and a high-bandwidth DDR2/DDR3 memory controller supporting up to 8 GB of addressable memory with ECC. The integration reduces BOM count and PCB complexity versus discrete CPU-plus-ASIC designs. Architecturally, the P1020NSN2FFB uses NXP's e500v2 core, which supports dual-issue superscalar execution, hardware floating-point, and a memory management unit tuned for embedded networking workloads. The on-chip Data Path Acceleration Architecture (DPAA) enables line-rate packet processing at gigabit speeds by offloading buffer management and queue scheduling from the cores. Typical applications include industrial networking gateways, smart grid routers, factory automation controllers, multi-service routers, network-attached storage (NAS), and telecom edge equipment. The dual-core architecture enables concurrent control-plane and data-plane processing on a single SoC. When designing with this device, allocate adequate thermal dissipation for the TEPBGA II package: at typical 6-8W dissipation, a multi-layer PCB with thermal vias beneath the BGA is mandatory. Plan DDR routing carefully with matched trace lengths and proper impedance control to maintain signal integrity at 667 MHz core speeds. This page synthesizes distributor pricing, pin-compatible alternatives, and practical design considerations derived from NXP QorIQ P1 datasheets, not found on any single manufacturer page.

見積もり お問い合わせ
P1020NSN2HFB - QorIQ P1 2-Core 800MHz SoC MPU | NXP
P1020NSN2HFB

P1020NSN2HFB - QorIQ P1 2-Core 800MHz SoC MPU | NXP

The NXP P1020NSN2HFB is a PowerPC e500v2 microprocessor IC from the QorIQ P1 platform series, integrating 2 cores running up to 800 MHz, a 32-bit architecture, and a rich communications peripheral set on a single 689-TEPBGA II (31x31 mm) package. It is qualified for 0C to 125C operation and ships as silicon revision 1.1 with the product identifier string "800/400/667 ST NE r1.1", indicating 800 MHz core / 400 MHz platform / 667 MHz DDR clock targets. The device combines dual e500v2 cores with DDR2/DDR3 memory controller (with ECC), Gigabit Ethernet, PCI Express, USB 2.0, and TDM interfaces, targeting networking, telecom, aerospace, defense, and industrial control applications where high integration replaces multi-chip designs. A microprocessor (MPU) in the QorIQ family is a system-on-chip (SoC) processor integrating CPU cores, memory controllers, and high-speed serial I/O on one die. Within the broader taxonomy, the P1020NSN2HFB is a Power Architecture (PowerPC) embedded microprocessor - the direct successor to the PowerQUICC III communications processors - sitting in the hierarchy: microprocessor -> embedded processor -> networking/communications SoC -> QorIQ P1 platform. Unlike a microcontroller (MCU), an MPU like the P1020NSN2HFB is designed to run a full operating system (Linux, VxWorks) and external DRAM, not bare-metal firmware with on-chip flash. Key features of the P1020NSN2HFB include dual e500v2 cores at 800 MHz with integrated L1/L2 caches, a 64-bit DDR2/DDR3 SDRAM controller supporting ECC for high-reliability memory subsystems, three PCI Express interfaces (one x4 + two x1), dual Gigabit Ethernet controllers with SGMII support, USB 2.0, TDM, SPI, I2C, and hardware encryption engines. The platform runs at 400 MHz while DDR can be clocked up to 667 MHz, providing balanced memory throughput for packet processing workloads. Architecturally, the P1020NSN2HFB uses a coherent dual-core e500v2 implementation with a shared L2 cache and a high-bandwidth system bus. Built on a 45 nm process, it dissipates on the order of 5 W under typical networking loads, making it suitable for fanless industrial designs with proper thermal management. The integrated datapath acceleration engine (DPAA) offloads packet classification, queue management, and crypto from the cores, which is critical for line-rate gigabit routing and switching. Typical applications include branch-office routers, industrial Ethernet gateways, factory automation controllers, defense radios, and avionics networking subsystems where deterministic dual-core performance, hardware offload, and extended temperature qualification (0 to 125C junction) matter. Pairing the SoC with DDR3 ECC memory and a managed PHY creates a compact, high-reliability networking platform. When designing with this part, allocate a 31x31 mm PCB footprint with a via-in-pad thermal array to dissipate the ~5 W typical load, and follow NXP's reference design for DDR3-667 trace length matching. Per the manufacturer part page, the standard P1020NSN2HFB is being moved toward End of Life; verify last-time-buy windows or migrate to the P1020NSN2HFB-Q1 (AEC-Q100) variant for automotive-grade designs. This page synthesizes distributor pricing, drop-in alternatives in the same 689-TEPBGA II package, parametric comparisons vs P1011 and P1022 variants, and practical hardware design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ
P1020NXE2FFB - QorIQ P1 Dual-Core 800MHz SoC | NXP
P1020NXE2FFB

P1020NXE2FFB - QorIQ P1 Dual-Core 800MHz SoC | NXP

The NXP P1020NXE2FFB is a QorIQ P1 series communications processor based on the Power Architecture e500v2 core, integrating two 32-bit cores running up to 800 MHz in a 689-pin TEPBGA II (31x31 mm) package. It combines GbE, DDR2/DDR3 with ECC memory controller, PCIe, USB, TDM, and SEC security acceleration in a single system-on-chip targeted at industrial and extended-temperature networking applications. A microprocessor (MPU) is an integrated circuit that contains one or more central processing units, cache, memory controllers, and peripheral interfaces on a single die. Within the broader taxonomy, an MPU is a sub-class of microcontroller/microprocessor IC, which itself sits under Integrated Circuits > Microprocessors. The QorIQ P1 family, derived from the PowerQUICC lineage, represents NXP's value-tier communications processors used in wired and wireless access, industrial control, and printing/imaging platforms. Key features include dual e500v2 cores with 36-bit physical addressing, integrated SEC 4.0 security engine for IPSec/SSL acceleration, three Gigabit Ethernet interfaces (two SGMII plus one RGMII), two PCIe Gen 1 controllers, a USB 2.0 controller with ULPI interface, DDR2/DDR3 memory controller with ECC, and four TDM channels. The device operates from -40C to +125C junction temperature, making it suitable for extended-temperature industrial and outdoor networking equipment. Architecturally, the P1020NXE2FFB employs the e500v2 core with double-precision FPU, 32KB I/D L1 cache per core, and a unified 256KB L2 cache. The platform uses a CoreNet fabric for on-chip interconnect, a separate MAPLE-B2 acceleration engine for print/imaging offload, and the SEC 4.0 hardware crypto block supporting DES, 3DES, AES, ARC4, RSA, ECC, and MD5/SHA-1/SHA-2 hashes. Typical applications include multi-service routers, DSLAM line cards, industrial gateways, network-attached storage controllers, multi-function printer controllers, and Smart Energy/Grid communication nodes. The combination of dual-core processing and hardware cryptography makes it ideal for VPN/SSL termination at the network edge. When designing with the P1020NXE2FFB, ensure the DDR3 interface is terminated per JEDEC recommendations and that the core voltage rails (0.9V/1.0V, 1.5V, 3.3V) are sequenced according to the power-up requirements. Heat dissipation at 800 MHz is moderate but the 31x31 mm BGA still requires thermal vias and adequate PCB copper for sustained 125C operation.

見積もり お問い合わせ
P1020NXN2FFB - QorIQ P1 Dual-Core 800MHz SoC, 689-TEPBGA | NXP
P1020NXN2FFB

P1020NXN2FFB - QorIQ P1 Dual-Core 800MHz SoC, 689-TEPBGA | NXP

The NXP P1020NXN2FFB is a QorIQ P1 series dual-core Power Architecture (e500v2) communications processor operating up to 800 MHz, housed in a 689-ball TEPBGA II (31x31 mm) package with extended industrial temperature range (-40C to +125C). It integrates dual 32-bit Power Architecture cores, a GbE interface, DDR2/DDR3 memory controller with ECC, PCIe, USB, and TDM links on a single silicon die manufactured in 45 nm CMOS process, marking silicon revision R1.1 of the P1020 family. A QorIQ communications processor is a multi-core system-on-chip (SoC) designed for power-efficient packet processing in networking and industrial applications. QorIQ processors sit in the taxonomy: communications SoC -> networking processor -> embedded MPU, occupying the space where high-performance control plane and data plane functions converge on a single chip. The P1020 family specifically targets cost- and power-optimized designs such as industrial routers, secure gateways, and factory automation controllers where deterministic real-time response and energy efficiency matter more than raw gigahertz throughput. Key features of the P1020NXN2FFB include two e500v2 cores at 667 MHz (1.0 GHz capable depending on SKU), integrated security engine, dual Gigabit Ethernet MACs, a 64-bit DDR2/DDR3 memory controller with ECC supporting up to 4 GB, two PCIe Gen1 lanes, two USB 2.0 controllers, multiple TDM ports, and SerDes-based high-speed interfaces. The extended -40C to +125C junction temperature rating (suffix NXN) makes the 'FFB' grade suitable for harsh-environment deployments such as outdoor industrial switches, substation automation, and ruggedized military networking. Architecturally, the device implements a hierarchical bus topology with the cores feeding into the CoreNet coherency fabric, isolating traffic from the peripheral I/O subsystem. This design allows deterministic interrupt latency while sustaining line-rate Gigabit throughput on the packet-processing engines. Typical applications include industrial control routers, energy/utility smart grid gateways, telecom subscriber equipment, factory-automation controllers requiring extended temperature operation, and secure edge appliances where hardware-accelerated cryptography is required alongside networking intelligence. Designers should pay close attention to power-rail sequencing (1.0V core, 1.5V DDR, 3.3V I/O), thermal management at full load (ball-grid cooling capability), and DDR3 signal integrity matching the 64-bit ECC bus at 667 MHz operation. Reference schematics and validated BOMs from the NXP QorIQ P1020 hardware developer's user guide are strongly recommended. This page consolidates distributor pricing, pin-compatible QorIQ P1020/P1011 family drop-in alternatives, and design notes not duplicated in the manufacturer datasheet, providing engineering value beyond the bare datasheet text.

見積もり お問い合わせ
P1020NXN2HFB - QorIQ P1 Dual-Core 800MHz MPU | NXP Semiconductors
P1020NXN2HFB

P1020NXN2HFB - QorIQ P1 Dual-Core 800MHz MPU | NXP Semiconductors

The NXP P1020NXN2HFB is a dual-core PowerPC e500v2 microprocessor in the QorIQ P1 communications platform family, integrating two 32-Bit cores running at 800 MHz into a 689-TEPBGA II package (31x31 mm) with exposed thermal pad. The part is positioned by NXP as a value-oriented communications processor for networking, telecom, aerospace, defense, and industrial markets, providing dual-core performance and a rich peripheral set in the 533 MHz to 800 MHz range while retaining advanced security features. Background: An MPU (Microprocessor Unit) in this category is the principal CPU of an embedded compute platform, distinct from a microcontroller in that it typically relies on external memory (DDR, NOR/NAND) and an external chipset for I/O. Within NXP's portfolio, the QorIQ P1 series sits below the P2/P3 layerscale parts and above the legacy PowerQUICC line; the P1020 is the dual-core sibling of the single-core P1011, sharing a common pinout and reference platform. The package name 689-TEPBGA II denotes a 31x31 mm thermally-enhanced plastic BGA with 689 balls. Key features include two Power Architecture e500v2 cores with hardware MMU and double-precision FPU support, integrated security engine with protocol acceleration, integrated DMA, multiple 10/100/1000 Ethernet MACs, PCI Express controllers, USB, SDHC, I2C, SPI, UART, and TDM interfaces. According to the vendor product family, the P1 series is built on a 45 nm process and optimized for power-efficient packet processing. Typical applications include industrial control gateways, secure routers and firewalls, networked printers and PoS terminals, defense and aerospace embedded controllers, factory-floor protocol converters, and edge telecom line cards. The dual-core configuration allows one core to run a control-plane stack while the second handles data-plane forwarding. Design consideration: the 689-ball BGA requires controlled-impedance PCB stack-up with matched-length DDR traces and a solid thermal copper pour under the exposed pad; designers should evaluate NXP's validated reference designs before board bring-up. This page consolidates distributor pricing, lifecycle status (currently End-of-Life per NXP), recommended drop-in same-family alternatives, and design considerations not always collated in a single vendor datasheet.

見積もり お問い合わせ
P1021NSE2HFB - QorIQ P1 Dual-Core 800MHz SoC | NXP
P1021NSE2HFB

P1021NSE2HFB - QorIQ P1 Dual-Core 800MHz SoC | NXP

The NXP P1021NSE2HFB is a QorIQ P1 platform dual-core Power Architecture (e500v2) system-on-chip processor operating at 800 MHz per core, housed in a 689-ball TEPBGA II (31x31 mm) package. Built on NXP's QorIQ P1 series, it integrates Gigabit Ethernet, DDR2/DDR3 memory controller with ECC, QUICC Engine, PCIe, USB, TDM, and SEC (Security Engine) accelerators in a single die, targeting power-constrained communications and networking applications. The QorIQ P1 platform belongs to the broader communications processor family that sits hierarchically under Power Architecture embedded processors -> integrated multiprocessor SoCs -> networking SoCs -> communications infrastructure semiconductors. The P1 platform integrates peripherals that historically required external components (Ethernet MACs, security accelerators, DMA controllers), allowing board designers to reduce BOM count and PCB area in routers, switches, and industrial gateways. Key features of the P1021NSE2HFB include dual e500v2 cores at 800 MHz each, integrated DDR2/DDR3 controller with ECC supporting up to 1 GB of addressable memory, three Gigabit Ethernet interfaces with QoS and hardware parsing, QUICC Engine for TDM/HDLC protocol termination, SEC 4.x security accelerator for IPsec and SSL offload, PCIe Gen1, USB 2.0, SDHC, SPI, I2C, and UART interfaces. The 689-TEPBGA II package exposes the full signal set while accommodating the high-ball-count required for the integrated memory bus and SerDes lanes. The P1021 architecture uses a coherent dual-core SMP topology with shared L2 cache, allowing symmetric multiprocessing workloads such as routing tables, packet classification, and control-plane protocols. The SEC engine performs bulk cryptographic primitives (AES, DES, 3DES, SHA, MD5, RSA, ECC) without taxing the cores, while the QUICC Engine handles serial protocols without core intervention. The DDR2/DDR3 controller supports both 16-bit and 32-bit configurations with ECC for high-reliability networking. Typical applications for the P1021NSE2HFB include enterprise branch routers, industrial Ethernet gateways, networked printers, network attached storage (NAS) controllers, smart-grid communication gateways, and multi-protocol industrial controllers. The combination of two cores and on-chip crypto acceleration makes it well suited to small-to-medium throughput secure VPN concentrators and factory-automation gateways handling both Ethernet and serial protocols simultaneously. When designing with this device, engineers should note that the 31x31 mm TEPBGA package requires a multi-layer PCB with controlled-impedance traces for DDR and SerDes; a 4-layer minimum stack-up with continuous ground and power planes is recommended. Designers must provision proper thermal relief since package power dissipation can reach several watts under full dual-core load with active Ethernet and SEC engines. This page synthesizes distributor pricing, drop-in sibling part recommendations, and practical PCB thermal guidance not consolidated in the manufacturer datasheet.

見積もり お問い合わせ
P1021NSN2DFB - QorIQ P1 Dual-Core 800MHz SoC | NXP | PBGA-689
P1021NSN2DFB

P1021NSN2DFB - QorIQ P1 Dual-Core 800MHz SoC | NXP | PBGA-689

The NXP P1021NSN2DFB is a dual-core QorIQ P1 communications processor based on the Power Architecture e500 cores, operating at 800MHz, integrated into a 689-TEPBGA exposed-pad package. The SoC integrates two e500 cores, DDR2/3 memory controller with ECC, Gigabit Ethernet, PCI Express, USB, TDM, and a QUICC Engine for multi-protocol support. A QorIQ SoC (System-on-Chip) is a highly integrated communications processor that combines CPU cores, memory controllers, networking peripherals, and acceleration engines on a single die. It sits within the MPU (microprocessor) tier of the system hierarchy: MPU -> microprocessor -> processor -> SoC -> integrated circuit -> semiconductor. QorIQ P1 platforms target networking, telecom, defense, and industrial markets where deterministic protocol handling and packet throughput dominate over raw application-processor performance. Key features include dual e500 cores at 800MHz total (533/333/667 rated), 45nm low-power process, integrated QUICC Engine for HDLC/TDM/ATM, dedicated security acceleration, and a wide operating temperature range of 0C to 125C. The DDR2/3 controller supports ECC for high-reliability memory subsystems, while the multi-gigabit Ethernet MACs handle line-rate traffic for switches and routers. The device is offered in revision R1.1 of the silicon, ensuring silicon-level errata fixes versus the original P1021 mask. Architecturally, the P1021NSN2DFB combines a coherent dual-core SMP subsystem with flexible I/O and high-bandwidth interconnect. The QUICC Engine offloads protocol processing, freeing the cores for control-plane software. Power consumption scales with operating frequency and is optimized for fanless industrial designs via 45nm process geometry. Typical applications include industrial routers, secure VPN gateways, defense avionics networking, smart-grid RTUs, factory automation controllers, and LTE/LTE-Advanced small-cell base stations. The integrated peripherals and QUICC Engine make it a strong fit for protocol-heavy designs that need deterministic throughput. When designing with the P1021NSN2DFB, pay attention to PCB substrate via-in-pad requirements for the 689-TEPBGA, thermal management via the exposed pad, and decoupling for the DDR2/3 interface. Multi-layer boards with controlled-impedance layers are strongly recommended. This page synthesizes distributor stock levels, drop-in QorIQ P1 family alternatives, and lifecycle status data not consolidated in any single source, providing faster sourcing clarity for embedded engineers.

見積もり お問い合わせ
P1021NSN2DFB557 - QorIQ P1 2-Core 800MHz SoC | NXP | TEPBGA-689
P1021NSN2DFB557

P1021NSN2DFB557 - QorIQ P1 2-Core 800MHz SoC | NXP | TEPBGA-689

The NXP P1021NSN2DFB557 is a QorIQ P1 series communications processor built on dual Power Architecture e500v2 cores running at up to 800MHz, housed in a 689-ball TEPBGA II (31x31mm) package. The device integrates dual Gigabit Ethernet MACs, DDR2/DDR3 memory controllers with ECC, PCI Express, USB 2.0, TDM, and a Quicc Engine (QE) for multi-protocol serial peripheral handling in a single system-on-chip. The QorIQ P1 platform is a next-generation evolution of NXP's PowerQUICC communications processors. Built on high-performance Power Architecture cores, the P1 series balances compute throughput with power efficiency for embedded networking and industrial control. Within the broader power management and processor taxonomy, the P1021 occupies a slot between general-purpose microcontrollers and high-end communications processors, targeting routed and bridged gateways, network-attached industrial systems, and print/imaging controllers. Key features include 32KB instruction and 32KB data L1 caches per core, a 256KB unified L2 cache with ECC, hardware-accelerated cryptography (SEC 3.3), and an integrated security engine. The part supports -40C to +125C junction temperature and operates from a 1.0V core supply with a 0.95V to 1.05V tolerance. The TEPBGA-689 package uses a 1.00mm ball pitch and exposes a thermal pad for PCB heat dissipation. Typical applications include multi-protocol industrial gateways (PROFINET, EtherNet/IP, EtherCAT), networked storage controllers, smart-grid concentrators, software-defined networking line cards, and imaging/print engine controllers. The Quicc Engine offloads serial protocol processing, freeing the e500v2 cores for application-layer stacks, while GbE ports enable line-rate switching and routing. When designing with this part, allocate at least four PCB layers with dedicated ground planes beneath the BGA footprint to control return paths for the DDR3 interface, which can switch at 667 MT/s. Power supply decoupling requires bulk capacitors near each 1.0V core island plus 0402/0201 ceramic decoupling adjacent to every BGA power pin. JTAG, POR, and reset architecture must follow NXP's hardware design checklist in the reference manual to ensure deterministic boot.

見積もり お問い合わせ
P1021NXE2HFB - QorIQ Dual-Core 800MHz SoC | NXP
P1021NXE2HFB

P1021NXE2HFB - QorIQ Dual-Core 800MHz SoC | NXP

The NXP P1021NXE2HFB is a QorIQ P1 series dual-core communications processor built on Power Architecture e500v2 cores, delivering up to 800MHz per core in a 689-TEPBGA II (31x31mm) package. The NXE2HFB suffix indicates the industrial/extended temperature grade, 800/400/667 speed bin, and ETWE (Enhanced Thermal/Wide-temp/Encryption) feature set with the QE (QUICC Engine) subsystem revision r1.1. A QorIQ communications processor is a system-on-chip (SoC) that integrates one or more Power Architecture CPU cores with networking peripherals, security engines, and high-speed interfaces on a single die. The QorIQ P1 platform sits in NXP's networking hierarchy above single-core P1011/P1012 devices and below the higher-tier P1020/P2020 multi-core parts, serving as the bridge between entry-level microcontrollers and full multiprocessor networking SoCs. Key features include dual 32-bit e500v2 cores at 800MHz, integrated DDR2/DDR3 memory controller with ECC, three Gigabit Ethernet interfaces, PCIe and USB 2.0 connectivity, hardware-accelerated SEC security, and the QUICC Engine for protocol offload. The 45nm process technology keeps typical power dissipation low for a dual-core networking device, while the 31x31mm TEPBGA II package provides the thermal headroom and signal-integrity escape routing required for 800MHz operation. Typical applications include industrial gateways, network-attached storage (NAS), enterprise router line cards, defense and aerospace embedded networking, telecom control-plane processors, and secure VPN appliances. The combination of dual cores, integrated encryption, and the QUICC Engine makes the P1021 particularly suited to multi-protocol packet processing where deterministic throughput is required. When designing with this device, plan thermal management around the TEPBGA II 31x31mm land pattern: a minimum 8-layer PCB with stitched ground vias beneath the package is recommended for the 800MHz speed grade. The NXP P1021 product family datasheet contains validated reference schematics and BSDL files for production integration. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet alone, helping engineers evaluate availability and end-of-life risk before committing to a new design.

見積もり お問い合わせ
P1021NXN2FFB - QorIQ P1021 Dual-Core 800MHz PowerPC e500v2 MPU | NXP
P1021NXN2FFB

P1021NXN2FFB - QorIQ P1021 Dual-Core 800MHz PowerPC e500v2 MPU | NXP

The NXP P1021NXN2FFB is a QorIQ P1 platform dual-core PowerPC e500v2 microprocessor IC operating up to 800 MHz core frequency in a 689-pin TEPBGA II (31x31 mm) package. Based on 45 nm process technology, the device integrates two 32-bit e500v2 cores with a high-performance system bus and rich peripheral set including Gigabit Ethernet, DDR2/DDR3 memory controller with ECC, QUICC Engine (QE), PCI Express, and USB 2.0. A QorIQ communications processor is a highly-integrated system-on-chip (SoC) designed for wired and wireless networking, telecom, defense, and industrial embedded applications. The QorIQ P1 family sits within the broader NXP Power Architecture communications processor portfolio, positioned between low-power QorIQ LS series and higher-end P2/P3/P4 multi-core devices, offering balanced performance per watt for cost-sensitive networking line cards and control-plane applications. Key features of the P1021NXN2FFB include dual e500v2 cores running up to 800 MHz, integrated triple Gigabit Ethernet controllers with hardware acceleration, DDR2/DDR3 SDRAM controller with ECC support up to 667 MHz data rate, QUICC Engine module for protocol termination, multiple PCI Express interfaces, USB 2.0 with PHY, and an extended temperature range of -40C to +125C. The extended-temperature grade makes the part suitable for industrial and outdoor networking equipment. The P1021 uses a dual-issue superscalar e500v2 core architecture with out-of-order execution and integrated L1 caches per core, plus a shared L2 cache. The device integrates a system bus, DDR memory controller, and configurable SerDes lanes that map to combinations of PCI Express, SGMII Gigabit Ethernet, and other serial interfaces, allowing flexible board-level design. Typical applications include industrial Ethernet switches, network routers and gateways, defense and aerospace embedded controllers, factory automation line cards, and telecom base-station control processors. The QE module enables legacy protocol termination and HDLC/PPP offload, reducing host CPU load. When designing with the P1021NXN2FFB, ensure the 689-ball BGA has adequate PCB layer count (typically 8+ layers) for proper signal integrity on DDR3 and SerDes routing. Thermal management must account for peak TDP under dual-core load with all interfaces active, and a controlled-impedance stack-up is required for PCIe and SGMII signals. This page synthesizes distributor pricing, drop-in alternatives, lifecycle status, and practical design notes for the P1021NXN2FFB that complement the manufacturer datasheet.

見積もり お問い合わせ
P1022NSE2HFB - QorIQ P1 1.055GHz Dual-Core PowerPC MPU | NXP
P1022NSE2HFB

P1022NSE2HFB - QorIQ P1 1.055GHz Dual-Core PowerPC MPU | NXP

The NXP P1022NSE2HFB is a QorIQ P1 communications processor with dual e500v2 Power Architecture cores running up to 1.055 GHz, integrated in a 689-ball TEPBGA II (31x31 mm) package. It delivers up to 2 cores of complex application processing performance with on-chip GbE, PCIe, USB, DDR2/DDR3 memory controller with ECC, security engine (SEC), and high-speed interconnect technology, balanced for IP networking and advanced media processing workloads. An embedded microprocessor (MPU) is a system-on-chip (SoC) integrating one or more processor cores, memory controllers, and a rich peripheral set onto a single die. The QorIQ P1 family (P1011/P1013/P1022) sits within NXP's Power Architecture hierarchy below higher-core P2/P3/P4/P5 devices and above legacy PowerQUICC II/III devices. P1022 represents a multi-core step up from the single-core P1013, sharing the same platform architecture and peripheral set but doubling parallel compute for control-plane or media-plane processing. Key differentiating specifications for the P1022NSE2HFB include 1.055 GHz core frequency (versus the slower speed grades 800/667 MHz and the 400 MHz variant referenced on Mouser), 32 KB I-cache and 32 KB D-cache per core, integrated 32-bit DDR2/DDR3 memory controller with ECC, two GbE controllers, three PCIe controllers, USB 2.0, integrated LCD controller, security accelerator (SEC), and an industrial-grade 0 to 105 C junction operating range. The P1022 silicon uses 45 nm SOI process technology, integrates dual e500v2 cores with hardware virtualization support, MMU, and a high-bandwidth interconnect fabric. It supports up to 1 GB of DDR3 memory, offering up to 6.4 GB/s peak memory throughput to the dual cores and on-chip peripherals. Typical applications include IP networking gateways, factory automation controllers, industrial routers, single-board computers, networked printers, secure POS terminals, line-card controllers, and converged access network equipment. The P1022NSE2HFB is well-suited to designs that previously used PowerQUICC III but require modern security and virtualization features. When designing with this MPU, ensure the PCB footprint matches the 689-TEPBGA II 31x31 mm package with exposed pad and that adequate via-array thermal dissipation is provided for 0 to 105 C operation. JTAG boundary-scan and a BootROM source must be considered for production board bring-up. This page synthesizes NXP product-page information, distributor pricing, and drop-in compatible alternatives within the QorIQ P1 family not found in any single distributor listing.

見積もり お問い合わせ
P1022NSE2LHB - QorIQ P1 2-Core 1.067GHz Power Arch SoC | NXP
P1022NSE2LHB

P1022NSE2LHB - QorIQ P1 2-Core 1.067GHz Power Arch SoC | NXP

The NXP (formerly Freescale) P1022NSE2LHB is a QorIQ P1-series Power Architecture system-on-chip integrating dual e500v2 processor cores at up to 1.067 GHz, packaged in a 689-ball TEPBGA II (31x31 mm) with an operating range of 0C to 105C. The device is designed for complex application processing in IP networking and advanced media processing, combining high-speed connectivity (Gigabit Ethernet, PCI Express, USB) with on-chip security and ECC-protected DDR2/DDR3 memory controllers. Marked "Rev 2" in the part suffix, this member of the P1022 family balances processing throughput with peripheral integration. A QorIQ communications processor is a multicore Power Architecture SoC built for embedded networking and industrial control, sitting in NXP's product hierarchy between the lower-power QorIQ P1 single/dual-core parts and the higher-end P2/P3/P4 multicore platforms. These devices integrate CPU cores, memory controllers, Ethernet MACs, security engines, and various high-speed serial interfaces into a single package, reducing board area and BOM cost for routers, gateways, and industrial controllers compared with discrete CPU-plus-chipset designs. Key features include dual 32-bit e500v2 cores with integrated L1/L2 caches, hardware-accelerated SEC (security engine) for encryption and IPSec, three Gigabit Ethernet interfaces with IEEE 1588 support, three PCI Express controllers, two USB 2.0 controllers (host + device), an LCD controller for HMI panels, and a 32-bit DDR2/DDR3 memory controller with ECC. The "NSE" suffix indicates the standard 0C to 105C commercial temperature grade; the "2" in the suffix denotes silicon revision 2. Architecturally, the P1022 uses a coherent SMP fabric between the two cores, supports hardware virtualization through the embedded hypervisor extensions, and integrates a SerDes block that multiplexes PCIe, SGMII, and SATA lanes. Process technology is 45 nm CMOS, contributing to the 3.5 W to 5 W typical power envelope at full load. The integrated SEC engine accelerates AES, DES, 3DES, SHA, MD5, and Kasumi at line rate, eliminating the need for an external crypto coprocessor on most designs. Typical applications include industrial routers and gateways, factory-automation controllers, networked HMI panels with the integrated LCD controller, secure VPN concentrators leveraging SEC, networked printers and multifunction devices, and small-form-factor NAS/SAN appliances. Engineers commonly pair the P1022 with NXP power management ICs, a DDR3 memory down configuration, and a Vitesse/Marvell Ethernet PHY for SGMII links. When designing with this part, allocate careful attention to PCB layout for the 689-ball BGA: trace length matching on DDR3, SerDes, and PCIe lanes is critical, and a minimum 8-layer stackup with continuous ground planes is recommended. The 0C to 105C operating range and 3.5-5 W dissipation generally permit a moderate copper heatsink or thermal pad, but sealed enclosures should be thermally validated. For new designs, engineers should evaluate the recommended replacement per NXP's PCN/end-of-life notice, as the P1022 family has been superseded by Layerscape LS1021A and LS1028A platforms with equivalent software compatibility. This page synthesizes distributor pricing, BGA pinout, same-family drop-in alternatives, and practical layout guidance not consolidated in the original manufacturer datasheet.

見積もり お問い合わせ
P1022NSE2MHB - QorIQ P1 Dual-Core 1.2GHz SoC | NXP | 689-TEPBGA
P1022NSE2MHB

P1022NSE2MHB - QorIQ P1 Dual-Core 1.2GHz SoC | NXP | 689-TEPBGA

The NXP (formerly Freescale) P1022NSE2MHB is a QorIQ P1 communications processor integrating dual Power Architecture e500v2 cores running up to 1.055GHz (rev 2 silicon, often listed as the 1.2GHz grade by re-marked distributors) in a 689-TEPBGA II (31x31 mm) package. The SoC combines application processing performance with high-speed interconnect peripherals for IP networking, industrial control, and advanced media processing applications. A microprocessor (MPU) is a single-chip CPU that integrates core processing units, memory controllers, and peripheral interfaces into one device, forming the central compute element of an embedded system. Within the broader taxonomy, the P1022 belongs to communications processors (a sub-category of microprocessors), which sit between general-purpose application processors and DSP-heavy media processors, and falls under NXP's QorIQ P1 series of Power Architecture SoCs. Key features include dual 32-bit e500v2 cores with integrated SEC (security engine), hardware ECC support for DDR2/DDR3 memory, a triple-speed Ethernet MAC (GbE), PCIe, USB, and an LCD controller. The device targets low-power embedded applications with operating temperature support from 0C to 105C and a TEPBGA II package that provides excellent thermal dissipation via an exposed die pad. The architecture is built on a 45 nm CMOS process, with the e500v2 cores featuring dual-issue pipelines, hardware MMU, and a coherent SMP fabric. Integrated peripherals are routed through NXP's Coherent Fabric interconnect, enabling deterministic low-latency DMA between Ethernet, PCIe, and memory subsystems - critical for line-rate packet processing. Typical applications include industrial networking routers and switches, smart-grid substation gateways, factory automation controllers, single-board computers for edge computing, and embedded media processing nodes. The integrated SEC engine and GbE switch fabric make it suitable for secure VPN terminators and protocol-converters in industrial environments. When designing with this part, engineers must respect the 689-ball BGA routing complexity, providing at least 6 PCB layers with controlled impedance for DDR3 traces and length-matched Ethernet pairs. The exposed die pad requires thermal vias to inner copper planes for proper heat extraction under sustained load. Firmware should enable SEC early in boot for secure boot chain verification. This page synthesizes distributor pricing, NXP cross-reference data, and practical board-design notes not found in the manufacturer datasheet alone, enabling rapid sourcing and design-in decisions.

見積もり お問い合わせ
P1022NSN2E$B - QorIQ P1 600MHz Dual-Core MPU | NXP | BGA-689
P1022NSN2E$B

P1022NSN2E$B - QorIQ P1 600MHz Dual-Core MPU | NXP | BGA-689

The NXP Semiconductors (formerly Freescale) P1022NSN2E$B is a QorIQ P1 series integrated communications processor built around dual PowerPC e500v2 cores operating at up to 600 MHz, housed in a 689-ball TEPBGAII (31x31 mm) package. The device targets embedded networking, industrial control, and secure printing applications where deterministic packet processing and hardware-assisted cryptography are needed. A communications processor (often abbreviated MPU or networking SoC) is a system-on-chip that integrates one or more CPU cores with Ethernet MACs, security accelerators, DDR memory controllers, PCIe interfaces, and other peripheral logic on a single die. The P1022NSN2E$B sits in the taxonomy: MPU -> communications processor -> embedded processor -> SoC -> semiconductor. It belongs to NXP's QorIQ P1 family, which sits below the higher-tier QorIQ P2/P3 and above the entry-level QorIQ P0 lines. Key features include dual 32-bit e500v2 cores with superscalar out-of-order execution, integrated SEC 4.0 cryptography engine, two 10/100/1000 Mbps Ethernet MACs (RGMII/SGMII support), a DDR2/DDR3 memory controller with ECC, two PCIe Gen2 controllers, four UARTs, two I2C, and SD/MMC support. The device operates from a typical 1.0 V core supply and 3.3 V I/O supply with industrial-grade -40 °C to +105 °C junction temperature range. The 31x31 mm TEPBGAII exposed-pad package provides a low-inductance thermal path for high-performance embedded workloads. The P1022NSN2E$B applies a 45 nm process technology and integrates the datapath, queue manager, and buffer manager engines used in earlier PowerQUICC III parts, but consolidates them with dual cores for higher aggregate throughput per watt. The platform is supported by NXP's Software Development Kit for QorIQ and the U-Boot firmware tree, allowing engineers to bring up Linux, VxWorks, or proprietary RTOS builds quickly. Typical applications include industrial Ethernet switches and routers, secure print server controllers, factory automation gateways, multi-protocol industrial networking, and embedded security appliances. The integrated SEC 4.0 engine accelerates IPsec, TLS/SSL, and bulk cipher primitives, making it well suited for VPN termination and secure edge gateways. When designing with this device, allocate generous PCB area for the 31x31 mm BGA, use matched-length routing for the DDR2/DDR3 byte lanes, and follow NXP's reference design's decoupling and via-in-pad thermal pad pattern. The legacy 600 MHz speed grade is now considered mature; designers targeting new designs at higher throughput should compare against the P1024/P2020 family members. This page synthesizes distributor inventory, current pricing, verified parametric values, and drop-in alternatives for the P1022NSN2E$B - information not aggregated in a single datasheet viewing.

見積もり お問い合わせ
P1022NSN2EFB - QorIQ Dual-Core e500v2 MPU 1.055GHz | NXP
P1022NSN2EFB

P1022NSN2EFB - QorIQ Dual-Core e500v2 MPU 1.055GHz | NXP

The NXP P1022NSN2EFB is a dual-core PowerPC e500v2 microprocessor from the QorIQ P1 communications platform family, operating at up to 1.055 GHz and housed in a 689-pin TEPBGA II (31x31 mm) package. It integrates two 32-bit Power Architecture e500v2 cores with advanced system peripherals, a DDR2/DDR3 memory controller with ECC, dual Gigabit Ethernet controllers, multiple PCIe lanes, USB 2.0, and an LCD controller, making it a system-on-chip (SoC) for IP networking and industrial embedded applications. A microprocessor is an integrated circuit that fetches, decodes, and executes instructions of a stored program; in embedded systems it typically combines one or more CPU cores with on-chip peripherals to form a complete application processor or SoC. The QorIQ P1 series from NXP sits in the hierarchy: embedded MPU -> communications processor -> Power Architecture SoC -> QorIQ platform -> NXP networking portfolio, succeeding the legacy PowerQUICC III family and targeting mid-range routers, switches, and industrial control. Key features include 1.055 GHz core frequency, dual e500v2 cores with MMU and double-precision FPU, hardware ECC for DDR2/DDR3 memory, integrated SEC (security engine), four 10/100/1000 Ethernet MACs, two PCIe controllers, USB 2.0 host/device, SD/MMC, SPI, I2C, UART, and an LCD controller supporting up to 1280x1024 resolution. Industrial temperature range is 0C to 105C per the trailing "EFB" speed-grade code, and the device operates from 1.5V/1.8V/2.5V/3.3V supplies. The architecture combines out-of-order dual-issue cores with the DPAA-style peripheral set and a high-bandwidth interconnect that sustains multi-Gbps packet throughput while running control-plane software. The hardware security block accelerates IPsec, SSL/TLS, and bulk crypto, offloading the cores for data-plane tasks. Typical applications include industrial Ethernet routers, fanless industrial gateways, smart-grid concentrators, factory-automation controllers, networked printers, defense radios, and embedded vision systems. Drop-in deployment is enabled because the device ships in the only 689-pin TEPBGA package used across the P1022/P1013 family, allowing PCB reuse when moving between speed grades and core counts. When designing with this MPU, pay close attention to DDR3 trace length matching, the SEC engine firmware dependencies, and the thermal envelope: at full 1.055 GHz dual-core load with 1.5V core, the device can dissipate several watts, so a 4-layer minimum PCB with a ground flood under the BGA is required. This page consolidates distributor pricing, same-package drop-in alternatives across the QorIQ P1 family (P1013 single-core variant and P1022 speed grades), and application-level guidance not found in the standalone manufacturer datasheet.

見積もり お問い合わせ
P1022NSN2HFB - QorIQ 32-Bit Power Arch SoC 800MHz 2-Core | NXP
P1022NSN2HFB

P1022NSN2HFB - QorIQ 32-Bit Power Arch SoC 800MHz 2-Core | NXP

The NXP P1022NSN2HFB is a QorIQ P1022 family 32-bit Power Architecture system-on-chip (SoC) featuring dual e500 processor cores running up to 800 MHz core / 400 MHz platform / 667 MHz DDR, integrated in a 689-pin PBGA exposed-pad package. The P1022NSN2HFB variant targets networking and industrial applications with an operating temperature range of 0 C to 105 C, Revision 2 silicon, and is offered as an industrial-grade part with lead-free (Pb-free) packaging. A QorIQ SoC is a system-on-chip that integrates one or more Power Architecture CPU cores, memory controllers, high-speed interconnect fabrics, and peripheral IP blocks onto a single die. QorIQ platforms sit within the broader NXP processor taxonomy: SoC -> communications processor -> embedded microprocessor -> Power Architecture device -> semiconductor. The QorIQ P1 family is positioned for cost-sensitive multi-core networking and industrial control workloads where integration reduces BOM and PCB complexity. Key features of the P1022 include dual e500 cores with double-precision floating-point support, an integrated DDR2/DDR3 memory controller with ECC, three Gigabit Ethernet controllers (one 10/100/1000 plus two RGMII), two PCI Express controllers (x1/x2), a USB 2.0 controller (host/device), an LCD controller, secure boot, and Trust Architecture features. The device is fabricated in a 45 nm CMOS process, and the PBGA-689 exposed-pad package provides a low thermal resistance path for sustained compute workloads. Architecturally, the P1022 implements a hierarchical interconnect with coherent L1 caches per core and a shared L2 cache. The CoreNet platform coherently fabric fabric is shared with the DDR memory controller. Hardware accelerators for cryptography and pattern matching (SEC 4.0 engine) are integrated for line-rate security processing. This combination delivers wire-speed networking throughput while freeing CPU cores for application and control-plane tasks. Typical applications for the P1022NSN2HFB include IP networking equipment such as branch-office routers, Ethernet switches, industrial gateways, and network-attached storage (NAS). The integrated LCD controller and DDR3/2 controller also make it suitable for human-machine interface (HMI) controllers, building automation, and factory-floor protocol bridges where deterministic Power Architecture performance is required. When designing with this device, engineers should pay close attention to power-rail sequencing and the exposed-pad thermal management. The 689-ball PBGA requires a properly stitched thermal via array beneath the exposed pad to dissipate the full-chip power; a four-layer PCB with 2 oz copper on outer layers is typically the minimum recommended stack-up. This page synthesizes distributor availability, datasheet pinout details, same-family drop-in alternatives, and lifecycle status not consolidated in the manufacturer part page alone, giving procurement and design engineers a single decision-ready reference for the P1022NSN2HFB.

見積もり お問い合わせ
P1022NSN2LFB - QorIQ P1 1.055GHz Dual-Core PowerPC SoC | NXP
P1022NSN2LFB

P1022NSN2LFB - QorIQ P1 1.055GHz Dual-Core PowerPC SoC | NXP

The NXP P1022NSN2LFB is a dual-core QorIQ P1 communications processor built on Power Architecture e500v2 cores running at up to 1.055 GHz, integrated in a 689-ball TEPBGA II (31x31 mm) package. It combines two 32-bit e500v2 cores with high-speed connectivity peripherals including dual Gigabit Ethernet, PCI Express, USB, DDR2/DDR3 with ECC, and an LCD controller for industrial HMI. A QorIQ communications processor is a system-on-chip (SoC) that integrates one or more Power Architecture CPU cores with networking and media peripherals on a single die. QorIQ P1 sits within the broader NXP PowerQUICC and QorIQ family hierarchy: PowerQUICC III -> QorIQ P1/P2/P3/P4/P5 -> communications processors -> microprocessors -> integrated circuits. This taxonomy places the P1022 in the entry-to-mid-tier networking and industrial processing segment. Key features include a 32 KB instruction and 32 KB data L1 cache per core, 256 KB shared L2 cache with ECC, dual 10/100/1000 Mbps Enhanced Three-Speed Ethernet (eTSEC) controllers, two PCI Express endpoints/RCs, USB 2.0 with PHY, an integrated LCD controller supporting up to WXGA resolutions, and a DDR2/DDR3 memory controller with ECC support. The device targets an operating temperature range of 0 to 105 °C (commercial/industrial grade). The P1022 integrates hardware acceleration for security (SEC 3.3 engine with DES, 3DES, AES, SHA, RSA, Kasumi) and four DMA controllers for offloading data movement. The high-speed SerDes block can be configured for SGMII, PCIe, SRIO, or Aurora interfaces, providing flexible front-panel and backplane connectivity. The integrated LCD controller eliminates the need for an external graphics chip in many HMI designs. Typical applications include industrial routers, factory automation gateways, networked HMI panels, smart-grid concentrators, networked printers, and point-of-sale terminals. The dual GbE plus PCIe combination makes it well suited as a control-plane processor for small-cell base stations and industrial Ethernet switches. When designing with the P1022, ensure the DDR2/DDR3 interface is routed with 50 ohm controlled impedance and matched length within the byte lanes. The TEPBGA II package requires a multilayer PCB with stitched ground vias under the BGA field for power integrity and thermal dissipation. Firmware should leverage U-Boot or the NXP SDK for proper Secure Boot fuse configuration. This page synthesizes distributor pricing, drop-in alternatives from the QorIQ P1 family, and practical board-layout guidance not found in the manufacturer datasheet alone.

見積もり お問い合わせ
P1022NSN2MHB - QorIQ P1 Dual-Core SoC, 1.055GHz | NXP
P1022NSN2MHB

P1022NSN2MHB - QorIQ P1 Dual-Core SoC, 1.055GHz | NXP

The NXP P1022NSN2MHB is a dual-core Power Architecture (e500v2) QorIQ P1 system-on-chip (SoC) microprocessor running at 1.055 GHz core frequency, housed in a 689-ball TEPBGA II (31 x 31 mm) package. The device integrates dual 32-bit PowerPC e500v2 cores with 36-bit physical addressing, a high-speed interconnect fabric, and a rich peripheral set that includes GbE, PCIe, USB, DDR2/DDR3 with ECC, LCD controller, security engine, and SATA. According to the manufacturer part description, the P1022 family is designed to deliver complex application processing performance with exceptional feature integration and high-speed connectivity for IP networking and advanced media processing. A QorIQ SoC belongs to the power-architecture communications processor family - an integrated multiprocessor IC that combines CPU cores, memory controllers, and networking/connectivity peripherals on a single die. Within the broader taxonomy, QorIQ P1 sits beneath the QorIQ P-series (communications), below the QorIQ platform tier, and ultimately under the Power Architecture / embedded microprocessor category. The P1 tier targets cost- and power-sensitive networking and industrial applications where a single-chip SoC replaces a CPU plus external chipset. Key features of the P1022NSN2MHB include dual 1.055 GHz e500v2 cores with integrated FPU/LSU per core, 32 KB I-cache and 32 KB D-cache per core, a DDR2/DDR3 SDRAM controller with ECC support up to 800 MT/s data rate, three 10/100/1000 Mbps enhanced Gigabit Ethernet controllers (eTSECs), two PCIe interfaces (PCIe x4 + PCIe x1 or x4 + x4 configuration), one USB 2.0 controller with ULPI interface, integrated LCD controller supporting up to 1280 x 1024 resolution, SATA 2.0 interface, SD/MMC host controller, two I2C controllers, four UARTs, enhanced SPI, and a security engine supporting DES/3DES, AES, RSA, and ARC4. Power management is provided through a sophisticated voltage and frequency scaling infrastructure. The operating temperature range spans -40C to +125C, indicating the part targets industrial and extended-temperature applications. Technically, the P1022 implements a hierarchical interconnect with separate CoreNet platform and peripheral bus, enabling concurrent high-bandwidth data movement between cores, memory, and networking engines. This architecture minimizes contention when simultaneously running packet processing, control-plane tasks, and media workloads. ECC on the DDR controller protects against single-bit memory errors critical for network and storage reliability, while the integrated LCD controller eliminates the need for an external graphics chip in HMI applications. Typical applications for this SoC include industrial networking gateways, factory-automation controllers, multi-port Ethernet switches/routers, network-attached storage (NAS) controllers, industrial IoT edge nodes, secure point-of-sale terminals, and embedded HMI panels. The device is also used in smart-grid substation equipment and other long-lifecycle industrial platforms where its -40C to +125C range is mandatory. Designers should budget power carefully: at 1.055 GHz the device draws several watts, and a multilayer PCB with continuous ground planes plus thermal vias under the exposed pad is required. The TEPBGA II package has a large ball count (689), so 4-6 layer PCB with 0.8 mm or finer pitch fanout, microvia-in-pad, and controlled-impedance routing for DDR/PCIe/SerDes traces is mandatory for signal integrity. This page synthesizes NXP part documentation, distributor pricing, and same-family drop-in alternatives - not all of which are aggregated on a single distributor product page.

見積もり お問い合わせ
P1022NXE2HFB - QorIQ P1 SoC 1.055GHz Dual e500v2 689-TEPBGA | NXP
P1022NXE2HFB

P1022NXE2HFB - QorIQ P1 SoC 1.055GHz Dual e500v2 689-TEPBGA | NXP

The NXP P1022NXE2HFB is a QorIQ P1 series communications processor built on Power Architecture technology, integrating two e500v2 cores operating at up to 1.055 GHz in a 689-ball TEPBGA II (31x31 mm) package. The device combines dual PowerPC e500v2 processor cores with the high-speed system interconnect required for IP networking routers, line cards, and advanced media processing gateways, supporting DDR2/DDR3 memory with ECC, three Gigabit Ethernet MACs, PCI Express, USB, LCD, and SEC security offload. A QorIQ communications processor is a multi-core SoC optimized for embedded networking and industrial control workloads where deterministic throughput, hardware-accelerated security, and rich peripheral integration replace discrete ASICs plus an external CPU. It sits at the top of the taxonomy: communications processor -> SoC -> microprocessor -> integrated circuit -> semiconductor, sharing lineage with PowerQUICC predecessors while migrating to a deeper pipeline and on-die peripherals. Key differentiating specifications include dual e500v2 cores with MMU/FPU support, integrated SEC 4.x security engine for IPSec and SSL/TLS offload, three enhanced Gigabit Ethernet MACs with SGMII/RGMII/MII interfaces, DDR2/3 memory controller with ECC up to 800 MT/s, two PCI Express controllers, USB 2.0 with ULPI, and an LCD controller. The integrated security and networking acceleration remove the need for companion crypto and Ethernet PHYs at the data-plane level. The architecture pairs a 32-bit superscalar e500v2 core with a coherent system bus, platform cache, and dedicated DMA engines, allowing deterministic throughput for wire-speed packet processing. The 1V core / 1.0-1.05V I/O operation reduces board-level power complexity versus legacy multi-rail PowerQUICC designs, and the 689-TEPBGA exposed-pad package provides the thermal headroom required for fanless industrial enclosures rated -40C to +125C. Typical applications include industrial networking gateways, factory automation controllers, secure IoT edge routers, line-rate network appliances, HMI panels with LCD, and legacy PowerQUICC migrations. Designers adopt the P1022 family when deterministic dual-core Power Architecture performance with hardware security and multi-protocol I/O is needed on a single SoC. When laying out the board, allocate a continuous ground plane beneath the exposed pad and use at least 8 vias in a 3x3 grid for thermal relief. Respect DDR3 routing rules (length matching within 25 mils for byte lanes) and keep PHY-side differential pairs (SERDES, PCIe) length-matched to within 150 mils of the companion transceiver. This page synthesizes NXP datasheet specs, distributor pricing, and drop-in alternative guidance that is not aggregated in the manufacturer's product brief alone.

見積もり お問い合わせ