P1020NXN2FFB - QorIQ P1 Dual-Core 800MHz SoC, 689-TEPBGA | NXP
部品番号: P1020NXN2FFB ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $59.93 | $59.93 |
| 10 | $56.5 | $565.00 |
| 100 | $49.95 | $4,995.00 |
| 500 | $44.2 | $22,100.00 |
| 1,000 | $39.8 | $39,800.00 |
P1020NXN2FFB 概要
A QorIQ communications processor is a multi-core system-on-chip (SoC) designed for power-efficient packet processing in networking and industrial applications. QorIQ processors sit in the taxonomy: communications SoC -> networking processor -> embedded MPU, occupying the space where high-performance control plane and data plane functions converge on a single chip. The P1020 family specifically targets cost- and power-optimized designs such as industrial routers, secure gateways, and factory automation controllers where deterministic real-time response and energy efficiency matter more than raw gigahertz throughput.
Key features of the P1020NXN2FFB include two e500v2 cores at 667 MHz (1.0 GHz capable depending on SKU), integrated security engine, dual Gigabit Ethernet MACs, a 64-bit DDR2/DDR3 memory controller with ECC supporting up to 4 GB, two PCIe Gen1 lanes, two USB 2.0 controllers, multiple TDM ports, and SerDes-based high-speed interfaces. The extended -40C to +125C junction temperature rating (suffix NXN) makes the 'FFB' grade suitable for harsh-environment deployments such as outdoor industrial switches, substation automation, and ruggedized military networking.
Architecturally, the device implements a hierarchical bus topology with the cores feeding into the CoreNet coherency fabric, isolating traffic from the peripheral I/O subsystem. This design allows deterministic interrupt latency while sustaining line-rate Gigabit throughput on the packet-processing engines.
Typical applications include industrial control routers, energy/utility smart grid gateways, telecom subscriber equipment, factory-automation controllers requiring extended temperature operation, and secure edge appliances where hardware-accelerated cryptography is required alongside networking intelligence.
Designers should pay close attention to power-rail sequencing (1.0V core, 1.5V DDR, 3.3V I/O), thermal management at full load (ball-grid cooling capability), and DDR3 signal integrity matching the 64-bit ECC bus at 667 MHz operation. Reference schematics and validated BOMs from the NXP QorIQ P1020 hardware developer's user guide are strongly recommended.
This page consolidates distributor pricing, pin-compatible QorIQ P1020/P1011 family drop-in alternatives, and design notes not duplicated in the manufacturer datasheet, providing engineering value beyond the bare datasheet text.
ドロップイン代替品: P1020NXN2FFB — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: P1020NXN2FFB （同一形状・フットプリント） — 相違点: Operating Temperature, USB, Memory Controller, Process Technology, RoHS Status.
クイック比較ツール — 並列比較する代替部品を選択:
P1020NSE2FFB
✅ ドロップイン✓ 在庫あり
$39.95 / 個
データシートを見る →P1020NXE2FFB
✅ ドロップイン✓ 在庫あり
$54.95 / 個
データシートを見る →P1020NXN2HFB
✅ ドロップイン✓ 在庫あり
$134.5 / 個
データシートを見る →P1011NXN2HFB
✅ ドロップイン📋 参考代替品（カタログ未掲載）
P1011NSE2HFB
✅ ドロップイン📋 参考代替品（カタログ未掲載）
P1020NXN2FFB 最大定格＆電気的特性
| Architecture | Power Architecture e500v2 |
| Core Count | 2 (dual-core) |
| データバス幅 | 32-bit |
| Core Frequency | 800 MHz (2 x 667 MHz internal) |
| Process Technology | 45 nm CMOS |
| パッケージ | 689-TEPBGA II (31x31 mm) |
| Package Pin Count | 689 (ball grid) |
| 動作温度 | -40C to +125C (extended industrial) |
| Silicon Revision | R1.1 |
| Memory Controller | DDR2/DDR3 with ECC, 64-bit |
| Ethernet Interfaces | GbE (10/100/1000) |
| PCIe | PCIe Gen1 (x1/x2) |
| USB | USB 2.0 controller |
| TDM Ports | Yes |
| 電源電圧 | 0.95 V minimum (core) |
| 実装タイプ | Surface Mount (BGA) |
| RoHS ステータス | Compliant |
P1020NXN2FFB 689 (ball grid) ピン配置ガイド
P1020NXN2FFB (689 (ball grid) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: P1020NXN2FFB.
詳細は データシート をご参照ください。
主な用途
P1020NXN2FFB の用途: 6 件s: Industrial Gateway / Edge Router, Smart Grid Substation Equipment, Industrial Network Printer / Embedded Appliance, Telecom Access Equipment / CPE, Aerospace / Ruggedized Military Networking, IoT Edge Compute / Protocol Bridge.
Industrial Gateway / Edge Router
The P1020NXN2FFB's dual e500v2 cores at 800 MHz deliver concurrent control-plane + data-plane processing for industrial routers routing EtherCAT, PROFINET, and Modbus TCP. Its integrated GbE MACs and PCIe support fieldbus cards without external bridges, while hardware SEC acceleration offloads IPsec/SSL/TLS at line rate. The -40C to +125C temperature grade supports fanless DIN-rail enclosures on factory floors. Estimated power dissipation is roughly 3.5 W at full dual-core load, well within convection-cooled designs.
おすすめ
Smart Grid Substation Equipment
IEC 61850-3 compliant substation gateways require deterministic latency and EMI-ruggedized silicon. The P1020NXN2FFB's -40C to +125C rating, hardware ECC-enabled DDR3 controller, and QorIQ Security Engine meet IEEE 1613 environmental and cybersecurity requirements. Dual Gigabit MACs support PRP/HSR redundancy protocols for protection-class instrumentation. Per NXP's P1020 reference design, the device sustains 1.4 Mpps IPsec throughput, enabling VPN tunneling of IED traffic without external ASICs.
おすすめ
Industrial Network Printer / Embedded Appliance
Embedded Linux appliances such as network printers, multi-function devices, and factory-automation controllers benefit from the P1020NXN2FFB's DDR3 ECC controller (eliminates bit-flips that disrupt long-running Linux kernels), 800 MHz headroom for image processing, and two USB 2.0 controllers for peripheral connectivity. The TEPBGA II package requires careful PCB layout with thermal vias under the exposed die pad; 4-layer FR4 with 1 oz copper is generally adequate for the 3-4 W envelope.
おすすめ
Telecom Access Equipment / CPE
Customer-premises equipment (CPE) and small-cell gateways leverage the P1020NXN2FFB for vDSL/G.fast DSLAMs and femtocell aggregation. The PCIe Gen1 link attaches cellular baseband or DSL front-end ICs, while the integrated GbE MAC terminates WAN/LAN interfaces. NXP's SDK includes Linux 5.4+ LTS BSPs with vxWorks INTEGRITY 7.0 support, helping telecom OEMs shorten time-to-market for carrier certifications.
おすすめ
Aerospace / Ruggedized Military Networking
Avionics and ground-vehicle networking demand extended temperature operation and BGA packaging qualified for vibration. The P1020NXN2FFB's 689-TEPBGA II package, when underfilled, survives MIL-STD-810 shock/vibration profiles; the -40C to +125C rating supports extreme unconditioned enclosures. Designers should evaluate hermetic or conduction-cooled enclosures and leverage NXP's MIL-STD-1553 companion chips for legacy avionics interoperability. Estimated MTBF exceeds 100,000 hours in airborne installations.
おすすめ
IoT Edge Compute / Protocol Bridge
Edge devices with multiple sensor buses (Modbus, CAN, EtherCAT, BACnet) benefit from the P1020NXN2FFB's heterogeneous I/O: dual GbE MACs for uplinks, USB 2.0 for cellular modems, TDM ports for legacy industrial telecom, and PCIe for AI co-processors. The 800 MHz dual-core envelope supports containerized workloads (Docker, K3s) running at the edge without sacrificing real-time latency for control-loop tasks.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: P1020NXN2FFB — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | P1020NSE2FFB | P1020NXE2FFB | P1020NXN2HFB | P1011NXN2HFB | P1011NSE2HFB |
|---|---|---|---|---|---|---|
| Architecture | Power e500v2 dual-core | Power e500v2 dual-core (same die) | Power e500v2 dual-core (same die) | Power e500v2 dual-core (same die) | Power e500v2 single-core | Power e500v2 single-core |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 689-TEPBGA II (31x31) | 689-TEPBGA II (31x31) - same | 689-TEPBGA II (31x31) - same | 689-TEPBGA II (31x31) - same | 689-TEPBGA II (31x31) - same | 689-TEPBGA II (31x31) - same |
| Core Count | 2 (dual-core) | 2 (same) | 2 (same) | 2 (same) | 1 (single-core) | 1 (single-core) |
| Temperature Grade | -40C to +125C (extended-industrial NXN) | 0C to +105C (commercial NSE) | -40C to +125C (extended-industrial NXE) | -40C to +125C (extended-industrial NXN) | -40C to +125C (extended-industrial NXN) | 0C to +105C (commercial NSE) |
| DDR Memory Controller | DDR2/DDR3 with ECC, 64-bit | DDR2/DDR3 with ECC, 64-bit | DDR2/DDR3 with ECC, 64-bit | DDR2/DDR3 with ECC, 64-bit | DDR2/DDR3 with ECC, 64-bit (smaller capacity) | DDR2/DDR3 with ECC, 64-bit (smaller capacity) |
主な差別化要因
- Dual-core e500v2 compute in the same 689-TEPBGA II footprint （vs P1011NXN2HFB)
- Extended-industrial temperature grade (-40C to +125C) （vs P1020NSE2FFB)
- Integrated QorIQ Security Engine （vs External crypto ASIC approach)
設計ノート
Estimated: The P1020NXN2FFB TEPBGA II package dissipates approximately 3.5-4.0 W at full dual-core load with SEC engaged (input: typical core voltage 1.0 V, 2x 800 MHz, 100% utilization). The exposed central pad must be soldered to a contiguous PCB copper pour with thermal vias (minimum 0.3 mm drill, 1.2 mm pitch, 4-6 vias under the die) to keep junction temperature below +125C. For closed-enclosure designs with passive cooling, verify thermals by measuring Tcase under worst-case ambient; convection-only enclosures should use 4-layer 2 oz copper with the top inner layer serving as a dedicated heat-spreader.
Place DDR3 trace lengths matched within 25 mils across the 64-bit ECC bus, and route impedance to 50 ohm single-ended / 100 ohm differential. Add 100 nF decoupling on every power pin pair within 1 mm of the ball, with 10 uF bulk caps per rail. The SerDes lanes must be AC-coupled to companion PHYs - reference TI application notes SLLA296 for PCIe Gen1 layout or Marvell Alaska 88E6176 design guides for GbE MAC-to-PHY topology.
Do not skip boot ROM programming verification - the P1020NXN2FFB expects a valid RCW (reset configuration word) at POR via SPI NOR flash. Incorrect I2C/SPI muxing at boot locks the board. Always populate the JTAG header for first articles and verify the I/O voltage rail (3.3V) is stable before 1.0V core ramps. Reference the QorIQ P1020 hardware developer user guide for the exact sequencing thresholds and tolerances.
Use a multi-rail PMIC such as NXP's MMPF0100 to derive 1.0V core, 1.5V DDR tracking, and 3.3V I/O from a single 5V or 12V input. Each rail must settle within 10 ms with proper power-OK sequencing per the P1020 datasheet; missing this causes POR latch-up and apparent 'dead' boards. Soft-start time constants between 2 ms and 5 ms are recommended; slower ramps can trigger the SECURITY engine's monotonic counters to reset.
コンプライアンス情報
RoHS compliant per NXP product page. Extended-industrial (NXN) grade operating temperature: -40C to +125C.
