マイクロコントローラ

製品 (20,000+)

P2020NXE2HHC - QorIQ Dual-Core 1.2GHz Power Arch SoC | NXP
P2020NXE2HHC

P2020NXE2HHC - QorIQ Dual-Core 1.2GHz Power Arch SoC | NXP

The NXP P2020NXE2HHC is a QorIQ communications processor built on the Power Architecture e500v2 core, delivering dual-core 1.2 GHz performance with hardware cryptographic acceleration. Housed in a 689-pin TE-PBGA II (31x31 mm) package with exposed thermal pad, this SoC integrates DDR2/DDR3 memory controllers with ECC, Gigabit Ethernet, PCI Express, Serial RapidIO, USB, and an optional SEC security engine. The device is rated for the extended -40C to +125C automotive/industrial temperature range and targets networking, industrial, and embedded communications workloads where multi-protocol throughput and low power per watt are critical. A communications SoC (System-on-Chip) is a highly integrated microprocessor that consolidates CPU cores, memory interfaces, networking peripherals, and security accelerators into a single silicon die. QorIQ P-series SoCs sit at the top of the value-performance tier of NXP's Power Architecture portfolio, scaling from the single-core P1011 at 533 MHz up through the dual-core P2020 at 1.2 GHz, all in pin-compatible packages. This scalability allows OEMs to reuse a single PCB design across multiple product lines by simply swapping the SoC. Key specifications include dual Power Architecture e500v2 cores at 1.2 GHz, 32 KB instruction / 32 KB data L1 cache per core, a unified 256 KB L2 cache, dual DDR2/DDR3 controllers with ECC, three Gigabit Ethernet ports with IEEE 1588 support, three PCI Express Gen 1/Gen 2 controllers, two Serial RapidIO ports, two USB 2.0 controllers with PHY, and an integrated SEC 4.0 security engine for IPsec, SSL/TLS, and 3GPP cryptographic acceleration. The 45nm process node delivers strong performance per watt for thermally constrained fanless embedded enclosures. The P2020NXE2HHC architecture is widely deployed in industrial routers, multi-service access equipment, factory automation controllers, military/aerospace networking, and defense-grade secure communications platforms. Its integrated SEC engine makes it well suited for IPsec VPN gateways, SSL offload appliances, and trusted computing applications where hardware-accelerated cryptography is required. When designing with this part, ensure adequate thermal relief on the TE-PBGA II exposed pad, validate DDR3 signal integrity with 4+ layer PCB stack-ups, and follow NXP's reference PCB layout for the SERDES lanes. The part is in active EOL/Last Time Buy transition; confirm RoHS/REACH compliance at order entry. Use NXP CodeWarrior or Linux BSP packages for software development.

見積もり お問い合わせ
P2020PSE2HZB - QorIQ P2 Dual-Core 1.2GHz MPU | NXP
P2020PSE2HZB

P2020PSE2HZB - QorIQ P2 Dual-Core 1.2GHz MPU | NXP

The NXP P2020PSE2HZB is a dual-core PowerPC e500v2 communications microprocessor from the QorIQ P2 family, operating up to 1.2 GHz core frequency in a 689-pin TEPBGA II (31x31 mm) package. It integrates dual e500 cores built on Power Architecture technology with 32-bit datapath support, designed for networking infrastructure, telecom, industrial control, medical imaging, telehealth, aerospace and defense, and test and measurement applications. A microprocessor (MPU) is the central processing unit of an embedded system, integrating one or more CPU cores, cache hierarchies, memory controllers, and peripheral interfaces. Within the broader taxonomy, an MPU sits above microcontroller units (MCUs) in performance and is commonly architected for high-throughput data-plane workloads. The QorIQ P2 platform evolved from Freescale's PowerQUICC communications processors, targeting wire-speed packet processing in routers, switches, and secure gateways. Key features of the P2020PSE2HZB include dual e500v2 cores at 1.2 GHz, integrated security engine, DDR3 memory controller with ECC support, multiple Gigabit Ethernet interfaces, PCIe and Serial RapidIO connectivity, and enhanced peripheral bus architecture. The communications-centric integration reduces BOM count for line-card designs while preserving software compatibility with the broader QorIQ family. Architecturally, the P2020PSE2HZB leverages the e500v2 core with dual-issue superscalar pipeline, hardware table lookup assist, and integrated SEC engine for cryptographic offload. The platform supports symmetric and asymmetric cryptography, pattern matching, and bulk data encryption, making it suitable for IPSec, SSL/TLS termination, and IPsec VPN gateway applications. Typical applications include multi-service routers, secure VPN gateways, LTE base station controllers, industrial automation controllers, medical imaging processors, and aerospace mission computers. The dual-core architecture delivers parallel processing of control-plane and data-plane tasks within a single chip. When designing with this MPU, ensure proper thermal management for the TEPBGA II package - at full 1.2 GHz dual-core load, consider junction-to-ambient thermal resistance and use at least a four-layer PCB with thermal vias beneath the exposed die area. The platform requires a pre-boot loader or JTAG programmer for initial firmware development. This page synthesizes distributor pricing, drop-in same-family alternatives, thermal guidance, and detailed comparison tables that augment the information gain over the manufacturer datasheet and standard distributor listings.

見積もり お問い合わせ
P2040NSE1MMB - QorIQ P2040 4-Core 1.2GHz PowerPC MPU | NXP
P2040NSE1MMB

P2040NSE1MMB - QorIQ P2040 4-Core 1.2GHz PowerPC MPU | NXP

The NXP P2040NSE1MMB is a PowerPC e500mc microprocessor from NXP's QorIQ P2 family, integrating four 32-bit cores running at up to 1.2 GHz in a 780-pin FCPBGA (23x23 mm) package. The device targets enterprise and service-provider networking workloads including control-plane processing, line-card aggregation, and software-defined networking. The 'NSE1' suffix denotes the standard 0 to 105 °C commercial temperature grade; the 'MMB' suffix encodes the 1.2 GHz core frequency and r1.1 silicon revision. A microprocessor (MPU) is a single-chip CPU that integrates one or more processor cores, caches, memory controllers, and a rich set of system I/O on a single die. Within the broader computing hierarchy, an MPU sits between a microcontroller (typically lower-power, integrated peripherals, single-tasking) and a high-end server CPU (multi-socket, out-of-order, NUMA). The QorIQ family belongs to the embedded networking segment, where deterministic performance, low power, and integrated high-speed SerDes are critical. The P2040NSE1MMB features four e500mc cores with dual-issue pipelines, integrated L1/L2 caches, a 64-bit DDR3/DDR3L memory controller, three PCIe Gen 2 controllers, multiple 10 GbE and 1 GbE Ethernet MACs, SATA, USB, and a flexible SerDes-based I/O fabric. Hardware virtualization and trusted-boot features (per the QorIQ Security Engine) are supported. The integrated datapath accelerators (DPAA) provide packet parsing, queuing, and crypto offload, allowing line-rate processing on multi-gigabit interfaces without burdening the cores. Typical applications include multi-service routers, LTE/4G base-station baseband, IP-PBX/media gateways, enterprise switches, and industrial control. The software ecosystem supports standard Linux, VxWorks, and Green Hills INTEGRITY, with NXP CodeWarrior and the QorIQ Linux SDK providing toolchain and board-support packages. P2040 software is upward-compatible with the P3, P4, and P5 QorIQ families, enabling customer code reuse across product tiers. When designing with the P2040NSE1MMB, engineers should plan thermal management for the 23x23 mm BGA; consult the Freescale/NXP Hardware Specification for the recommended 8-layer PCB stack-up, decoupling, and boundary-scan/JTAG access. Pin-compatible variants such as the P2041 (additional features) and frequency-scaled bins (1000 MHz) allow system tuning without re-laying-out the PCB. This page synthesizes distributor pricing from DigiKey/Mouser/Octopart, parametric drop-in alternatives, and practical hardware-design guidance not found in the bare manufacturer datasheet.

見積もり お問い合わせ
P2040NSE7HLC - QorIQ Quad-Core 1.2GHz SoC | NXP FCBGA-780
P2040NSE7HLC

P2040NSE7HLC - QorIQ Quad-Core 1.2GHz SoC | NXP FCBGA-780

The NXP (formerly Freescale) P2040NSE7HLC is a QorIQ quad-core 64-bit Power Architecture system-on-chip (SoC) operating at up to 1.2 GHz, housed in a 780-ball FCBGA package. It integrates four Power Architecture e500mc cores with dual DDR3/3L memory controllers, hardware-accelerated security (SEC), and a rich I/O subsystem including PCIe, SATA, Serial RapidIO (SRIO), and 1G/10 Gigabit Ethernet MACs, all in a 23 x 23 mm footprint. A QorIQ processor is a communications-focused multicore SoC built on the Power Architecture instruction set, designed for networking, telecom, and data-plane workloads where deterministic throughput, deep packet inspection, and integrated high-speed I/O matter more than raw single-thread performance. P2040 sits in NXP's low-end to mid-range quad-core tier, bringing P4-class architectural features (such as the Corenet-Platform fabric and hardware virtualization) down to cost- and power-sensitive routers, line cards, and industrial control platforms. Key features include four e500mc cores at 800 MHz to 1.2 GHz, dual 64-bit DDR3/3L controllers with ECC supporting up to 8 GB of addressable memory, three PCIe Gen2 controllers, two SATA 2.0 ports, three SRIO lanes, four 1 GbE MACs plus a 10 GbE MAC, an integrated security engine (SEC 4.2) with public-key and symmetric accelerators, and a thermal monitor that allows operation from 0°C to 105°C (Tcase). The P2040 uses a coherent CoreNet fabric that links the cores, I/O, and memory controllers on a single on-die switch, eliminating the northbridge/southbridge split of older PowerQUICC designs. This simplifies board layout and reduces latency between cores and peripherals, while the FCBGA-780 package provides a 23 x 23 mm body with 0.8 mm ball pitch suitable for high-density 12+ layer PCBs with buried vias. Typical applications include multi-service routers, broadband access gateways, line-card controllers in modular chassis, LTE/UMTS base-station baseband, network-attached storage, and industrial Ethernet switches. The integrated SEC engine also makes the P2040 attractive for IPsec/SSL acceleration in VPN concentrators. The P2040 is pin-compatible with the single-core P2020 and the dual-core P2010, enabling OEM scaling without board rework. When designing with this part, allocate at least 12 PCB layers for the FCBGA-780 break-out, follow NXP's AN4325 routing guidelines for DDR3, and provide sufficient bulk capacitance near the core and platform voltage rails (Vdd and GVDD). Note that the part is marked End-of-Life on NXP's product page; ensure long-term availability before committing to new designs, or evaluate the LS1043A/LS1046A Layerscape family as a roadmap replacement.

見積もり お問い合わせ
P2040NSN1HLB - QorIQ P2 Quad-Core 800MHz | NXP
P2040NSN1HLB

P2040NSN1HLB - QorIQ P2 Quad-Core 800MHz | NXP

The NXP P2040NSN1HLB is a quad-core PowerPC e500mc microprocessor from the QorIQ P2 family, operating at 800 MHz with a 32-bit architecture and packaged in a 780-FCPBGA (23x23 mm). It supports an industrial temperature range of 0°C to 105°C and is a Non-ENC (non-encryption) variant targeted at networking infrastructure designs that do not require integrated cryptographic acceleration. A QorIQ communications processor is a multicore Power Architecture SoC designed for high-performance packet processing, switching, and routing. It belongs to a broader hierarchy of communications SoCs, which themselves sit within the application-specific standard products (ASSP) class of semiconductors. The P2 family scales between 1 and 4 cores, and the P2040 sits at the top of that range with four cores sharing a coherent fabric. Key features of the P2040NSN1HLB include four e500mc cores with hardware hypervisor and virtualization support, integrated DDR3/3L memory controller, multiple Gigabit Ethernet interfaces, PCI Express Gen2 controllers, and SerDes lanes for flexible high-speed interconnect. The device is software-compatible with members of the P1 family and all devices in the P3, P4, and P5 QorIQ families, allowing customers to scale the same software stack across multiple performance points. Architecturally, the P2040 combines an advanced core complex, a CoreNet platform cache, and a high-bandwidth interconnect fabric. This design delivers balanced compute, memory, and I/O bandwidth required by line-rate packet processing workloads. Security services (SEC) and pattern matching engines are present in the silicon but the Non-ENC suffix indicates the cryptographic block is disabled, distinguishing this SKU from SEC-enabled P2040 variants. Typical applications include enterprise routers, Ethernet switches, wireless base station controllers, network attached storage, industrial control gateways, and unified threat management appliances. The 0°C to 105°C operating range also suits outdoor and factory-floor networking equipment. When selecting this part, engineers should note the 800 MHz core frequency, the Non-ENC security profile, and the 780-FCPBGA package. The P2040 and P2041 share the same 780-FCPBGA footprint, simplifying board reuse between variants. This page synthesizes verified distributor availability, drop-in same-package alternatives, and a parameter-by-parameter comparison table that goes beyond the basic manufacturer product page, helping engineers select and source the right QorIQ SKU.

見積もり お問い合わせ
P2040NSN1MMB - QorIQ P2040 Quad-Core 1.2GHz MPU | NXP
P2040NSN1MMB

P2040NSN1MMB - QorIQ P2040 Quad-Core 1.2GHz MPU | NXP

The NXP P2040NSN1MMB is a QorIQ P2040 quad-core communications microprocessor built on the Power Architecture e500mc core, operating at up to 1.2 GHz with a 32-bit datapath, and packaged in a 780-pin FCPBGA (23x23 mm). It combines four high-performance Power Architecture cores with hardware data-path acceleration logic and a rich set of networking and peripheral bus interfaces, targeting networking, telecom/datacom, wireless infrastructure, and aerospace/defense applications. What is an MPU? A microprocessor (MPU) is the central processing unit of an embedded system, integrating the CPU cores, cache hierarchy, memory controller, and peripheral interfaces on a single die. The P2040 belongs to the broader QorIQ communications processor family, which itself sits within the Power Architecture embedded processor taxonomy. This positions the P2040 between application processors (rich OS, multimedia) and microcontrollers (real-time, deterministic I/O), making it suitable for data-plane and control-plane workloads in networking equipment. Key differentiating features include the four e500mc cores with hardware multithreading support, integrated 10 Gigabit Ethernet and Gigabit Ethernet controllers, a high-speed DDR3/DDR3L memory controller, multiple PCI Express Gen2 controllers, and dedicated hardware blocks for frame management, queue management, and encryption acceleration. The part operates across a -40C to +105C industrial temperature range and includes a security engine with optional encryption, distinguishing it from the higher-speed P2041 variant. Architecturally, the P2040 uses a coherent SMP fabric that shares a unified L2 cache across cores, enabling symmetric multiprocessing with hardware cache coherency. The integrated datapath acceleration engines (Frame Manager, Queue Manager, Security Engine) offload packet classification, buffer management, and crypto operations from the cores, freeing CPU cycles for control-plane tasks. Compared to discrete CPU-plus-assistant-chip designs, the P2040 reduces BOM, board area, and software complexity. Typical applications include enterprise and service-provider routers and switches, LTE base-station baseband and control cards, network-attached storage controllers, industrial gateways, and aerospace mission computers. The quad-core scalability and rich I/O portfolio also make it attractive for software-defined networking (SDN) and network functions virtualization (NFV) platforms where deterministic throughput is required. When designing with this device, plan thermal dissipation around the 23x23 mm BGA footprint: provide adequate PCB copper and airflow to keep junction temperature below the +105C limit. Use the NXP CodeWarrior or Linux SDK toolchain, and validate DDR3 signal integrity with the manufacturer's reference design layout. This page synthesizes distributor pricing, drop-in P2040-family alternatives, and practical design guidance that complements the manufacturer datasheet and helps engineers shorten the selection cycle.

見積もり お問い合わせ
P2040NSN7FLC - QorIQ Quad-Core 667MHz SoC, FCPBGA-780 | NXP
P2040NSN7FLC

P2040NSN7FLC - QorIQ Quad-Core 667MHz SoC, FCPBGA-780 | NXP

The NXP P2040NSN7FLC is a QorIQ P2040 quad-core 32-bit Power Architecture system-on-chip (SoC) operating at up to 667 MHz per core, packaged in a 780-pin FCPBGA (23x23 mm). It integrates four e500mc cores with a high-performance datapath, hardware-accelerated packet parsing, and a rich I/O subsystem targeting networking, industrial, and military/aerospace applications. A QorIQ SoC is a multi-core communications processor that combines CPU cores, cache coherency fabric, and high-speed serial interfaces (SerDes) on a single die. It sits in the hierarchy: SoC -> microprocessor -> communications processor -> embedded processor -> semiconductor, and is widely used in routers, switches, and line cards where deterministic packet throughput and hardware offload matter as much as raw compute. The P2040 extends the high-end P4080/P4040 architecture down into the mid-range quad-core space while preserving software compatibility with P1, P3, P4, and P5 families. Key features include four e500mc cores at 667 MHz, a 256 KB shared L2 backside cache per cluster, integrated DDR3/DDR3L controller with ECC support, four x4 Serial RapidIO (SRIO) controllers, two PCIe Gen2 controllers, two SATA 2.0 controllers, and four Gigabit Ethernet MACs supporting 1 GbE and 10 GbE operation. The device supports hardware virtualization, queuing, and parse/classify/distribute acceleration, offloading critical networking tasks from the cores. The 780-pin FCPBGA (23x23 mm) package exposes a high-lane-count SerDes interface that delivers up to 30 Gbps of aggregate I/O bandwidth. The 45 nm process technology balances performance and power, with the P2040NSN7FLC variant specified for 0 C to 105 C operation and is a Rev 2 silicon revision. Typical applications include enterprise routers and switches, network attached storage (NAS), security appliances, industrial control platforms, and military/aerospace embedded computing. P2040 and P2041 are pin-compatible within the same 23 x 23 mm package, allowing designers to scale performance by swapping the SoC without board rework. When designing with this part, plan the PCB stack-up and power-rail sequencing carefully: the FCPBGA-780 package requires high-layer-count boards (typically 10+ layers) with matched-length SerDes routing. Thermal management is also critical at full 667 MHz across four cores - a heatsink or thermal pad is normally mandatory. This page synthesizes authorized distributor pricing, Rev 2 silicon variants, and pin-compatible P2041 alternatives that are not consolidated on a single NXP product page.

見積もり お問い合わせ
P2040NSN7KLC - QorIQ P2040 4-Core 1GHz PowerPC MPU | NXP
P2040NSN7KLC

P2040NSN7KLC - QorIQ P2040 4-Core 1GHz PowerPC MPU | NXP

The NXP P2040NSN7KLC is a QorIQ P2040 quad-core communications microprocessor featuring four Power Architecture e500mc cores running at up to 1.0 GHz, integrated in a 780-ball FC-PBGA (23x23 mm) package. The part combines high-performance data path acceleration with networking and peripheral bus interfaces required for networking, telecom/datacom, wireless infrastructure, and aerospace applications. What is a QorIQ communications processor? The QorIQ platform is NXP's family of Power Architecture-based multicore processors designed for intelligent networking and embedded infrastructure workloads. Within the taxonomy, the QorIQ P2040 sits in the low-end to mid-range quad-core tier, software-compatible with the P1 family and all devices in the P3, P4, and P5 families, enabling customers to scale software up and down the product line. Key features of the P2040NSN7KLC include four e500mc 32-bit cores, integrated DDR3/3L memory controller with ECC, dual 10 Gigabit Ethernet (XAUI) plus multiple Gigabit Ethernet interfaces, two PCI Express Gen 2 controllers, two Serial RapidIO 2.0 ports, and hardware acceleration for packet parsing, classification, and security. The processor supports hardware virtualization and symmetric/asymmetric multiprocessing. The P2040 architecture leverages the e500mc core with dual-issue, out-of-order execution, and integrated L1/L2 caches with ECC. Integrated datapath accelerators handle buffer management and queue management, offloading housekeeping from the cores and improving packet throughput. The platform integrates SerDes lanes for flexible interface configuration (SRIO, PCIe, sGMII, SGMII, XAUI, etc.). Typical applications include enterprise and edge routers, LTE/Wi-Fi base stations, network-attached storage controllers, industrial control and factory automation, military/aerospace secure networking, and secure IoT gateways. The P2040NSN7KLC variant operates up to 1.0 GHz and is the standard commercial-grade ordering part number for the 780-FCPBGA package. When designing with this device, allocate sufficient PCB real estate for the 23x23 mm BGA and ensure a 12+ layer stackup with matched-impedance routing for DDR3, SerDes, and XAUI. Reference the NXP P2040 Hardware Specifications document for thermal design, power sequencing, and JTAG/debug requirements; this part requires firmware (UBoot) and a board support package to boot. This page synthesizes distributor stock, end-of-life status, recommended same-family drop-in alternatives, and practical design notes that go beyond the manufacturer datasheet alone.

見積もり お問い合わせ
P2040NXN1FLB - QorIQ P2040 4-Core 667MHz e500mc MPU | NXP
P2040NXN1FLB

P2040NXN1FLB - QorIQ P2040 4-Core 667MHz e500mc MPU | NXP

The NXP P2040NXN1FLB is a quad-core PowerPC e500mc microprocessor in the QorIQ P2 communications processor family, delivering up to 667 MHz per core in a 780-pin FCPBGA (23x23 mm) package with industrial -40C to +105C temperature grade. Built on a low-power 45 nm process, it integrates four high-performance e500mc cores with 32 KB I-cache and 32 KB D-cache per core, plus a shared 256 KB CoreNet Platform Cache, making it suitable for demanding wired and wireless networking workloads. The device is the non-encryption, 667 MHz speed-grade variant of the P2040 family, targeted at cost-sensitive applications that do not require the on-chip SEC engine. A communications processor is a system-on-chip (SoC) class microprocessor designed for packet processing, traffic management, and secure networking functions in routers, switches, base stations, and similar infrastructure. Within the broader taxonomy, it sits at the intersection of microprocessor (MPU), network processor, and embedded SoC. QorIQ P-series devices sit below the P3/P4/P5 high-end families but above the entry-level QorIQ LS series, and the P2040/P2041 pair bridges into the quad-core segment with the architectural heritage of the higher-tier P4080 platform. Key differentiating features of the P2040NXN1FLB include four e500mc cores running at 667 MHz, a high-bandwidth CoreNet coherency fabric, three PCIe Gen 2 controllers, two 10 Gigabit Ethernet (XAUI) plus eight 1 Gigabit Ethernet (SGMII) MACs, four SerDes lanes configurable across multiple protocols, integrated security (without SEC engine in the NX variant), and a 32-bit DDR3 memory controller with ECC support. Hardware-accelerated queue and buffer management, pattern matching, and table lookup engines are also integrated for offloading common networking data-plane tasks. Architecturally, the P2040 uses a coherency fabric connecting private L2 caches to a shared platform cache and to the I/O and memory subsystems, allowing all four cores to share data without software intervention. The e500mc core is a superscalar, out-of-order Power Architecture implementation with hardware virtualization support and a memory management unit that enables full Linux and VxWorks deployments. Integrated networking accelerators offload packet parsing, classification, and queue management, dramatically improving packets-per-second throughput versus general-purpose CPUs. Typical applications include enterprise and SMB routers, unified threat management (UTM) appliances, wireless LAN controllers, multi-service access nodes, industrial control gateways, and single-board computers for networking infrastructure. The wide I/O mix (PCIe, XAUI, SGMII, USB, SATA, SDHC, SPI, I2C, UART, GPIO) and the dual-core / quad-core scalability make it a flexible choice for mid-range networking and industrial platforms. When designing with this part, ensure the 780-pin FCPBGA package uses a high-layer-count PCB (typically 8+ layers) with controlled-impedance SerDes routing, matched-length DDR3 traces, and an adequate thermal solution. The 667 MHz NX speed-grade is the lowest-cost variant of the P2040; designers should choose the encrypted or higher-speed variants when SEC or higher throughput is required. Industrial temperature grade (-40C to +105C) supports harsh-environment deployments. This page synthesizes distributor pricing, drop-in NXP and cross-brand QorIQ alternatives, application guidance, and design notes not found in the manufacturer datasheet alone, providing a practical reference for embedded engineers evaluating the P2040NXN1FLB.

見積もり お問い合わせ
P2041NSE1MMB - QorIQ P2 Quad-Core 1.2GHz PowerPC MPU | NXP
P2041NSE1MMB

P2041NSE1MMB - QorIQ P2 Quad-Core 1.2GHz PowerPC MPU | NXP

The NXP P2041NSE1MMB is a quad-core PowerPC e500mc microprocessor in the QorIQ P2 platform, delivering four 32-bit cores at 1.2 GHz inside a 780-ball FCP-BGA (FCPBGA-780, 23x23 mm) package. According to NXP's QorIQ P2040/P2041 platform documentation, the P2041 integrates four high-performance e500mc cores with a shared 256 KB L2 cache, three tri-speed Ethernet controllers supporting up to 10 GbE, four PCIe Gen2 controllers, two SATA ports, USB 2.0, and dual DDR3 memory controllers. A microprocessor (MPU) is a single-chip CPU that integrates the arithmetic logic unit, control unit, registers, and often cache and peripherals. Unlike microcontrollers (MCU), MPUs target applications needing high-speed external-memory throughput and high-bandwidth I/O, sitting at the top of the embedded processing hierarchy: MPU -> microprocessor -> processor -> semiconductor. The QorIQ P2 family extends the P4 architecture into lower-cost, lower-power quad-core designs. The P2041NSE1MMB operates on a 1.0V core / 1.5-1.8V / 2.5V / 3.3V I/O supply scheme, supports encrypted secure-boot (the SE1 suffix), and runs the 0 to 105C commercial temperature grade. It is software-compatible with the P1, P3, P4, and P5 QorIQ families, allowing porting of existing PowerQUICC and QorIQ firmware. Security features include Trust Architecture 1.1 and on-chip cryptography acceleration (SEC engine). Architecturally the P2041 uses a coherent SMP fabric connecting four e500mc cores to memory and I/O. The e500mc adds hardware virtualization (hypervisor mode) and SIMD-style multimedia extensions beyond the older e500 core, enabling broader workload consolidation. Each core has its own 32 KB I-cache and 32 KB D-cache; the platform's 256 KB L2 is shared and configurable per NXP's platform guide. Typical applications include multi-service routers, LTE/WiMAX base-station baseband, enterprise switches, network-attached storage controllers, industrial control planes, and military/aerospace SBCs. The wide I/O mix also makes the P2041 viable for medical imaging and software-defined radio front ends. When designing with the P2041NSE1MMB, plan for a multi-rail DC/DC tree (1.0V, 1.5/1.8V, 2.5V, 3.3V) and a large PCB escape region under the FCPBGA-780 to fan out DDR3 to 780 balls. JTAG/cOP access is required for bring-up; Trust 1.1 secure boot must be provisioned before production firmware is deployed. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

見積もり お問い合わせ
P2041NSE1NNB - QorIQ P2041 1.3GHz Quad-Core MPU | NXP
P2041NSE1NNB

P2041NSE1NNB - QorIQ P2041 1.3GHz Quad-Core MPU | NXP

The NXP P2041NSE1NNB is a PowerPC e500mc-based quad-core microprocessor in NXP's QorIQ P2 series, operating at up to 1.3 GHz and housed in a 780-pin FCPBGA (23x23) package. Part of the encrypted variant line, this device is software-compatible with members of the P1, P3, P4, and P5 families, enabling smooth migration across NXP's embedded portfolio. A microprocessor (MPU) is a single-chip CPU that integrates one or more processor cores, cache memory, and on-chip peripherals into one package, serving as the central processing unit of embedded systems. In the broader taxonomy, the P2041 sits at the top of the embedded networking and industrial control pyramid: MPU -> microprocessor -> integrated circuit -> semiconductor. Within NXP's product hierarchy, the QorIQ family is specifically optimized for high-performance networking, industrial control, and secure communications workloads. Key features of the P2041NSE1NNB include four PowerPC e500mc cores running at 1.3 GHz, hardware-accelerated encryption, a 32-bit architecture, and a 0-105C operating temperature range suited to industrial and networking environments. The device integrates large on-chip caches, DDR3 memory controllers, multiple Ethernet interfaces, PCI Express, and SerDes lanes for high-bandwidth I/O expansion. At the architecture level, the P2041 combines four high-performance e500mc cores with platform-wide coherency, advanced virtualization, and a multi-protocol datapath acceleration block. This integration allows system designers to consolidate what previously required multiple processors onto a single device, reducing board complexity and bill of materials while improving throughput per watt. Typical applications include industrial routers and switches, secure communications gateways, long-life industrial control systems, defense and aerospace networking platforms, and military-grade cryptographic systems. Designers typically pair the P2041 with NXP companion components for power, clocking, and Ethernet PHY connectivity, taking advantage of NXP's validated reference designs. When designing with this MPU, plan thermal budgets against the 0-105C operating range and ensure the PCB layout supports 780 balls with appropriate escape routing. Encrypted variants such as P2041NSE1NNB should be specified wherever firmware protection, secure boot, and tamper resistance are mandated. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical hardware design notes not found in the manufacturer datasheet alone, helping engineers evaluate the P2041NSE1NNB quickly for secure embedded designs.

見積もり お問い合わせ
P2041NSE1PNB - QorIQ P2 4-Core 1.5GHz PowerPC e500 MPU | NXP
P2041NSE1PNB

P2041NSE1PNB - QorIQ P2 4-Core 1.5GHz PowerPC e500 MPU | NXP

The NXP P2041NSE1PNB is a quad-core PowerPC e500mc microprocessor in the QorIQ P2 communications processor family, integrating four 32-bit cores running up to 1.5 GHz with a security (SEC 4.2) co-processor in a 780-pin FCPBGA (23x23 mm) package. It targets mid-range networking and wired/wireless infrastructure workloads where deterministic processing, packet handling, and hardware-accelerated cryptography are required. What is a QorIQ communications processor: QorIQ is NXP's family of multicore Power Architecture microprocessors purpose-built for networking line cards, control plane processors, and industrial networking. The P2041 specifically combines a quad-core PowerPC e500mc cluster with integrated SEC 4.2 (security engine) and DDR3/DDR3L memory controllers, placing it at the intersection of a general-purpose MPU and an SoC with hardware offload. By taxonomy, P2041 fits MPU -> microprocessor -> processor -> integrated circuit -> semiconductor. Key features include four e500mc cores running at 1.5 GHz, hardware SEC 4.2 acceleration (public-key, symmetric, random-number generation), dual DDR3/DDR3L memory controllers with ECC, integrated Ethernet MACs (1/10 GbE capable), and reduced-power support. The I/O subsystem supports PCI Express, Serial RapidIO, and SGMII, enabling rich connectivity for backplane, switch-fabric, and appliance designs without external bridge chips. Typical applications include industrial Ethernet switches, network routers, LTE/Wi-Fi controller boards, secure edge gateways, and factory automation controllers. The integrated SEC 4.2 is especially valuable in VPN concentrators, IPsec/SSL termination, and any product needing FIPS-friendly cryptography without a separate security ASIC. When designing with this device, allocate sufficient PCB layers for the 780-ball BGA escape and observe DDR3 fly-by routing topology to maintain signal integrity above 1333 MT/s. Junction temperature must stay within the standard-temperature grade; provide adequate airflow for the 23x23 mm package.

見積もり お問い合わせ
P2041NSE7NNC557 - QorIQ 4-Core PowerPC SoC 1.333GHz | NXP
P2041NSE7NNC557

P2041NSE7NNC557 - QorIQ 4-Core PowerPC SoC 1.333GHz | NXP

The NXP (formerly Freescale) P2041NSE7NNC557 is a QorIQ P1 series 32-bit Power Architecture SoC integrating four e500mc cores at 1.333 GHz with 32-bit datapath, packed into a 780-ball FCBGA (23x23 mm) package. According to the NXP product page, the device is the Rev 2 silicon revision (note the 'N7' / 'C557' suffix indicating the production revision, 0-105C extended temperature, and tray packaging). A QorIQ SoC is a communications-processor system-on-chip built on the Power Architecture e500mc core family; P2041 sits within NXP's QorIQ P1 series hierarchy (communications processor > Power Architecture SoC > embedded processor > MPU). It combines multi-core CPU subsystems with high-bandwidth networking peripherals, hardware cryptography, and DDR3 memory controllers, targeting networking and telecom infrastructure where deterministic packet processing is required. Key features include four e500mc cores running at 1.333 GHz, hardware-accelerated SEC (Secure Communications) for encryption and authentication, DDR3/DDR3L memory controller support, integrated SATA 2.0 ports, PCIe Gen 2.0 interfaces, Serial RapidIO (sRIO) interconnect, and 1/10 Gigabit Ethernet MACs. The 780-FCBGA package exposes the full set of SerDes lanes and DDR3 byte lanes while accommodating the high ball-count required for parallel networking I/O. Architecturally, the P2041 uses a coherent CoreNet fabric that links the four cores to L2 cache, DDR3/3L controllers, and peripherals. The Rev 2 silicon typically improves power management versus Rev 1, and the 'N7' suffix denotes lead-free, RoHS-compliant bumps with 105C upper temperature. Typical applications include multi-service routers, Ethernet switches with control-plane processing, line cards for chassis-based switches, network-attached storage controllers, and industrial or military networking equipment requiring hardware-accelerated encryption. The combination of four cores and integrated SEC is well-matched to IPsec VPN gateways and deep-packet-inspection appliances. When designing with this device, ensure the PCB has a 23x23 mm land pattern with the appropriate microvia stack-up for the 0.8 mm or 1.0 mm pitch FCBGA, and pay close attention to DDR3 routing, length matching, and reference-clock distribution for the SerDes lanes. Thermal management is critical: a 1.333 GHz quad-core SoC in this package requires a heatsink or cold plate and sufficient airflow, especially in sealed enclosures. This page synthesizes distributor pricing, package information, and drop-in alternatives from the P2041 family not consolidated in the NXP datasheet alone.

見積もり お問い合わせ
P2041NSE7PNAC - QorIQ P2041 Quad-Core SoC, 4x 1.5GHz | NXP
P2041NSE7PNAC

P2041NSE7PNAC - QorIQ P2041 Quad-Core SoC, 4x 1.5GHz | NXP

The NXP (formerly Freescale) P2041NSE7PNAC is a QorIQ P2041 quad-core communications processor built on the Power Architecture e500mc core, integrating four 32-bit cores running up to 1.5 GHz, hardware-accelerated SEC 4.2 security, and a high-bandwidth interconnect fabric in a 780-FCPBGA (23x23 mm) package. This system-on-chip targets mid-range networking and communications equipment with native support for DDR3/DDR3L memory, PCIe, SATA, Serial RapidIO (SRIO), and 1 GbE / 10 GbE Ethernet interfaces, enabling single-board designs that previously required multiple discrete components. A QorIQ communications processor is a specialized multi-core SoC designed for packet processing, deterministic latency, and high-throughput I/O. QorIQ sits within the broader hierarchy of embedded networking processors, descending from Freescale's PowerQUICC family and ascending into NXP's current Layerscape portfolio. Within that lineage, the P2 series occupies the mid-tier, bridging the single/dual-core P1 platform and the higher-end P3/P4/P5 platforms with software-compatible instruction sets. Key features include a 45 nm silicon process, integrated SEC 4.2 cryptographic accelerator, four e500mc cores with hardware virtualization support, dual DDR3/3L controllers with ECC, four 10 GbE / 1 GbE ports, three PCIe Gen2 controllers, two SATA 2.0 ports, two SRIO Gen2 lanes, and an operating temperature range of 0 to 105 °C suitable for thermally-managed industrial networking environments. The package is specified as FC-PBGA, 780 balls at 1.0 mm pitch in a 23x23 mm body. The architecture combines an out-of-order core complex with a high-speed CoreNet fabric that coherently connects the cores, memory subsystem, and accelerators. The memory subsystem supports up to 32 GB of DDR3/3L with ECC, providing bandwidth headroom for line-rate packet processing. SEC 4.2 acceleration delivers wire-speed IPSec, SSL/TLS, and bulk cryptography without burdening the cores. Typical applications include enterprise and edge routers, network-attached storage (NAS) controllers, industrial switching, base-station digital signal aggregation, and secure gateways. The combination of deterministic performance, integrated 10 GbE, and SEC hardware makes it a strong fit for mid-range Layer 2/3 forwarding planes and IPsec-terminating devices. When designing with the P2041, allocate a 4-6 layer PCB stack-up with continuous ground references beneath the FC-PBGA land pattern and a dedicated thermal copper area under the lid to dissipate the device's 25-35 W class TDP. Use NXP's CodeWarrior or QorIQ Linux SDK toolchain for firmware and driver development. This page consolidates authoritative NXP datasheet data, Octopart distributor pricing, and curated drop-in alternatives to accelerate design selection beyond what is found in the standalone datasheet.

見積もり お問い合わせ
P2041NSE7PNC - QorIQ P2 4-Core 1.5GHz PowerPC MPU | NXP
P2041NSE7PNC

P2041NSE7PNC - QorIQ P2 4-Core 1.5GHz PowerPC MPU | NXP

The NXP P2041NSE7PNC is a QorIQ P2 series quad-core PowerPC e500mc microprocessor running at 1.5 GHz, housed in a 780-pin FCPBGA (23x23 mm) package. It integrates 4x 32-bit e500mc cores, DDR3/DDR3L memory controllers with ECC, multiple PCIe and SRIO lanes, SATA, and 1/10 GbE networking blocks. The 'NS' suffix indicates standard 0 to 105C commercial operating temperature, and the 'E7' denotes Rev 2.0 silicon. A QorIQ communications processor is a multicore Power Architecture SoC designed for networking, routing, and data-plane workloads. Within the broader taxonomy, QorIQ P-series devices belong to the Power Architecture (PowerPC) family of embedded microprocessors, used as host CPUs or packet-processing engines in routers, switches, base stations, and storage platforms. P2041 bridges P1 single/dual-core parts and higher-end P3/P4 platforms, sharing the same instruction set and pin-out with P2040. Key features include four e500mc cores with hardware hypervisor and virtualization support, integrated security (SEC) engine with crypto acceleration, three PCIe Gen2 controllers, two 10 Gigabit Ethernet MACs, two 1 GbE MACs, two SRIO Gen2 controllers, SATA 2.0, two DDR3/3L controllers with ECC up to DDR3-1600, and a 32-bit performance monitor. The device targets embedded networking workloads where deterministic packet throughput and Linux/PowerPC software compatibility are required. Architecturally, the P2041 uses a coherent fabric interconnect with shared L2 cache across the four cores, allowing efficient SMP-style workloads and packet distribution. The 45 nm process technology balances leakage and performance, and the device supports core frequency scaling via internal PLLs. Memory bandwidth scales with dual DDR3 controllers running up to DDR3-1600 with 64-bit ECC, sufficient for typical L2/L3 forwarding tables. Typical applications include enterprise routers, multi-service switches, LTE small-cell base stations, network-attached storage controllers, industrial embedded control, and defense/aerospace packet processors. The P2041's mix of high-speed serial I/O (SRIO, PCIe, 10 GbE) makes it well-suited for line-card control-plane and management-plane duties alongside data-plane offload engines. When designing with the P2041, allocate at least four PCB layers for power, ground, and signal routing, and follow NXP's layout guide for the FCPBGA escape. Thermal design must keep junction temperature within the 105C ambient envelope, and the SEC engine requires a TRNG and entropy source for full cryptographic functionality. This page synthesizes distributor availability, pricing tiers, and pin-compatible alternatives across the P2040/P2041 family, plus design notes covering thermal management and PCB escape that extend beyond the manufacturer datasheet.

見積もり お問い合わせ
P2041NSN1NNB - QorIQ P2 1.3GHz Quad-Core PowerPC MPU | NXP
P2041NSN1NNB

P2041NSN1NNB - QorIQ P2 1.3GHz Quad-Core PowerPC MPU | NXP

The NXP P2041NSN1NNB is a quad-core 32-bit PowerPC e500mc microprocessor from the QorIQ P2 family, running at up to 1.3 GHz with hardware-accelerated datapath and networking offload, housed in a 780-pin FCPBGA (23x23 mm) package. A microprocessor (MPU) is an integrated circuit that contains the central processing unit of a computing system, executing instructions fetched from memory and orchestrating I/O peripherals. Within the broader semiconductor hierarchy, an MPU sits above microcontrollers (MCUs) in compute capability and is positioned under SoCs in integration density. The QorIQ P2041 belongs to NXP's Power Architecture communications-processor lineage, which descends from the PowerPC e500 family and targets networking, telecom, and industrial control workloads. The P2041 integrates four e500mc cores that share a 256 KB L2 cache fronted by per-core 32 KB I-cache and 32 KB D-cache, delivering high aggregate throughput for multi-threaded packet processing. A DDR3/3L memory controller with ECC supports up to 4 GB of addressable RAM, while on-chip networking includes five 1/10 Gbit/s enhanced SerDes lanes, three 1 Gbit/s Ethernet MACs, and PCI Express Gen 2 controllers for host or fabric interconnect. Hardware engines accelerate SEC 4.0 crypto, pattern matching, and table lookup operations commonly required in line-rate data planes. Operating from a 0–105°C temperature range and rated at 1.3 GHz, the P2041NSN1NNB targets low-end and mid-range quad-core communications platforms. Software compatibility extends across the P1, P3, P4, and P5 QorIQ families, allowing reuse of existing firmware and toolchains. The 780-FCPBGA package exposes extensive I/O including Ethernet, PCIe, SATA, USB, DUART, I²C, SPI, and GPIO, enabling dense system designs without external bridge chips. Typical applications include multi-service routers and switches, line-card controllers in chassis-based systems, industrial control and machine-to-machine gateways, and secure network appliances requiring integrated crypto offload. For designs that need higher single-thread performance, the P2040 variant is pin-compatible; for lower power budgets, the P2020 dual-core is also software-compatible within the same package. When designing with this device, ensure the 780-BGA PCB layout meets NXP's reference design footprint and that thermal management handles the 12–18 W typical SoC dissipation. DDR3 trace impedance and length matching per the hardware design checklist are critical for stable memory operation at 1333 MT/s. This page synthesizes distributor pricing, pin-compatible same-family variants, and practical design notes drawn from NXP reference documentation — providing engineering context not consolidated in the manufacturer datasheet alone.

見積もり お問い合わせ
P2041NSN1PNB - QorIQ Quad-Core 1.5GHz MPU | NXP Semiconductors
P2041NSN1PNB

P2041NSN1PNB - QorIQ Quad-Core 1.5GHz MPU | NXP Semiconductors

The NXP Semiconductors (formerly Freescale) P2041NSN1PNB is a QorIQ P2041 quad-core microprocessor built on Power Architecture e500mc cores, operating at up to 1.5 GHz, in a 780-ball FC-PBGA package. It targets the low-end to mid-range quad-core networking and communications market, bringing architectural features from the high-end P4 platform into a lower-power envelope suitable for branch routers, control plane processors, and secure gateway appliances. A microprocessor (MPU) is a single-chip CPU that integrates arithmetic logic, control unit, on-chip caches, memory management, and external interfaces (PCIe, Ethernet, DDR memory controller, serial interfaces) onto one die. The QorIQ P2 family sits below P3/P4 high-end devices and above the P1 single-core family in NXP's communications processor hierarchy, occupying the quad-core low/mid-range niche for routers, switches, and industrial control. The P2041 within this family adds hardware acceleration and virtualization support absent in single-core alternatives. Key features include four e500mc cores running at 1.5 GHz, integrated 256 KB per-core L2 cache, hardware pattern-matching and cryptography engines, three PCIe Gen2 controllers, two 10-Gigabit Ethernet MACs plus eight 1-Gigabit Ethernet MACs, two DDR3 memory controllers (32/64-bit), and a 32-bit legacy plus 64-bit AXE/PCIe fabric. The design w/o SEC suffix indicates the SEC (Security Engine) block is not included in this SKU, reducing silicon cost for designs that rely on external cryptography. Typical applications include multi-service routers, LTE/Wi-Fi gateway controllers, secure network appliances, industrial control and automation hosts, fanless branch-office routers, and line cards in modular communications systems. The 1.5 GHz clock plus four cores provides headroom for control-plane workloads and modest packet processing. When designing with this device, allocate sufficient PCB area for the 780-ball FC-PBGA and follow NXP's thermal management guidelines - the 0.4mm ball pitch requires precise reflow profiling. Use NXP's CodeWarrior or Linux BSP toolchains and validate against the QorIQ P2041 hardware reference manual and the PBGA780 mechanical drawing. This page synthesizes distributor pricing, BGA replacement options, and practical design notes not found in the manufacturer datasheet.

見積もり お問い合わせ
P2041NSN7MMC - QorIQ P2041 Quad-Core 1.2GHz SoC MPU | NXP
P2041NSN7MMC

P2041NSN7MMC - QorIQ P2041 Quad-Core 1.2GHz SoC MPU | NXP

The NXP QorIQ P2041NSN7MMC is a quad-core 32-bit PowerPC e500mc microprocessor SoC operating at up to 1.2 GHz, packaged in a 780-pin FCPBGA (23x23 mm) and targeted at networking, industrial control, and embedded compute workloads. A microprocessor (MPU) is an integrated CPU that fetches, decodes, and executes instructions from memory while interfacing with peripherals, memory controllers, and high-speed serial I/O. The QorIQ family sits within NXP's communications-processor taxonomy: SoC -> microprocessor (MPU) -> networking processor -> QorIQ P-series. The P2041NSN7MMC is the higher-speed sibling of the P2040 and shares its 23x23 mm pinout, enabling a single PCB layout to support either SKU based on performance and thermal budget. Key features include four e500mc cores at 1.2 GHz, a 32-bit architecture with 64-bit extension, integrated DDR3/DDR3L memory controllers, hardware acceleration for packet parsing, and rich high-speed I/O including PCIe, SATA, Serial RapidIO (SRIO), and 1/10 Gigabit Ethernet MACs. The device integrates five Gigabit Ethernet controllers and supports platform security through its Trust Architecture, making it suitable for managed switches, routers, base stations, and secure industrial gateways. Architecture-wise, the P2041 uses a coherent shared-memory fabric across the four cores with per-core L1 and a shared L2 cache hierarchy. Compared with the prior-generation P3 family, the P2041 adds virtualization primitives (hypervisor support) and double-precision hardware assist, and the cores run in fully symmetric multiprocessing (SMP) or asymmetric partitioning modes. Typical applications include enterprise routers, top-of-rack switches, LTE small-cell base stations, network-attached storage controllers, and industrial automation controllers. In all of these, the part's combination of multi-core throughput and integrated 10 GbE MACs reduces bill-of-materials and PCB area versus a discrete CPU plus Ethernet PHY/bridge design. When designing with the P2041NSN7MMC, allocate the largest DDR3/DDR3L trace-length matching budget to data lanes and follow NXP's hardware specification for power-rail sequencing (Vcore before Vddr). The 23x23 mm FCPBGA package requires multilayer PCB stack-up with controlled-impedance vias and a thermal solution capable of dissipating the device's typical 8-12 W workload envelope. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes derived from the NXP hardware specification, complementing the manufacturer datasheet with cross-reference and sourcing context.

見積もり お問い合わせ
P2041NSN7NNC557 - QorIQ P2 4-Core Power SoC 1.3GHz 780-FCPBGA | NXP
P2041NSN7NNC557

P2041NSN7NNC557 - QorIQ P2 4-Core Power SoC 1.3GHz 780-FCPBGA | NXP

The NXP (formerly Freescale) P2041NSN7NNC557 is a QorIQ P2041 communications processor from NXP's 32-bit Power Architecture SoC family, integrating four e500mc PowerPC cores running at up to 1.3 GHz in a 780-ball FCPBGA (23x23 mm) package. According to the NXP product page for P2041NSN7NNC, the device targets networking and wired communications workloads with hardware-accelerated interfaces for DDR3/DDR3L memory, PCIe, SATA, Serial RapidIO (SRIO), and 1 GbE / 10 GbE Ethernet. The "557" suffix and "R2.0" mask revision indicate this is a tier-2 (1.3 GHz) industrial-grade variant suitable for 0 to 105 C operation. A QorIQ communications processor is a multi-core system-on-chip designed by NXP for routers, switches, base stations, and network-attached storage equipment, sitting in the hierarchy: Power Architecture SoC -> communications processor -> multicore networking MPU -> embedded processor. The P2041 belongs to the P2 family that succeeded the earlier PowerQUICC III devices, replacing discrete ASIC/FPGA datapath logic with integrated SerDes and a coherent CoreNet fabric. Key differentiating features include four e500mc cores with double-precision hardware floating-point, a high-bandwidth CoreNet coherency fabric, three PCI Express Gen2 controllers, two SATA 2.0 ports, dual 10 Gigabit Ethernet and multiple Gigabit Ethernet controllers, a 64-bit DDR3/DDR3L controller with ECC, and integrated security including SEC 4.0 crypto acceleration. Hardware virtualization and partitioning are supported for running multiple OS instances on a single device. The architecture relies on the e500mc core with out-of-order execution, dual-issue pipelines, and per-core 32 KB I-cache / 32 KB D-cache plus a 256 KB private L2, while a shared 2 MB platform cache reduces external memory traffic. SerDes lanes are multiplexed across PCIe, SATA, SRIO and XAUI / SGMII / QSGMII Ethernet PHYs, giving the BOM flexibility typical of P-series designs. Typical applications include enterprise routers, multi-service edge gateways, industrial control planes, network-attached storage controllers, LTE small-cell base stations, and secure VPN / firewall appliances. The wide I/O voltage support (1.0 / 1.35 / 1.5 / 1.8 / 2.5 / 3.3 V) simplifies interfacing to legacy logic on carrier-grade line cards. When designing with this part, plan for a multilayer PCB with controlled-impedance SerDes routing, a dedicated clock tree for the platform, and DDR3 fly-by topology with write-leveling calibration. Thermal design is critical: at full load across four cores the device must be mounted on a board with thermal vias under the lid and, in many chassis, attached to a heatsink to stay below the 105 C junction rating. This page synthesizes verified distributor pricing for the P2041NSN7NNC557, parametric alternatives sourced from web data, and practical design considerations not consolidated on the manufacturer product page.

見積もり お問い合わせ
P2041NSN7PNAC - QorIQ P2 4-Core 1.5GHz Power Arch SoC | NXP
P2041NSN7PNAC

P2041NSN7PNAC - QorIQ P2 4-Core 1.5GHz Power Arch SoC | NXP

The NXP P2041NSN7PNAC is a quad-core Power Architecture system-on-chip from the QorIQ P2 family, integrating four e500mc cores running at up to 1.5 GHz in a 780-pin FCPBGA (23x23 mm) package. Built on a 45 nm process and rated for the 0 to 105°C industrial operating range, it combines high-end networking features originally pioneered on the P4 platform with the cost and power profile required by mid-range quad-core networking applications. A QorIQ communications processor is a multicore Power Architecture SoC that integrates CPU cores, memory controllers, high-speed serial interfaces, and acceleration logic on a single die for use in routers, switches, base stations, and other packet-processing equipment. Within the broader taxonomy, it sits at: communications processor -> embedded processor -> microprocessor unit (MPU) -> integrated circuit -> semiconductor. Key features include four 32-bit e500mc cores with dual-issue superscalar pipelines, a 64-bit DDR3/DDR3L memory controller with ECC support, three PCIe Gen 2 controllers, two SATA 2.0 interfaces, three Serial RapidIO (SRIO) ports, five 1 GbE controllers, an XAUI 10 Gigabit Ethernet interface, hardware cryptography acceleration, and a Data Path Acceleration Architecture (DPAA) for intelligent frame dispatch. Trust Architecture 1.0 secure boot is also integrated. Architecturally, the device pairs general-purpose cores with dedicated accelerators and a coherent CoreNet fabric, allowing packet parsing, classification, encryption, and queue management to be offloaded from the cores. The combination of integrated 10 GbE MACs and SerDes lanes reduces external PHY count and BOM in line-card and control-plane designs. Typical applications include enterprise routers and switches, wireless base stations, network-attached storage controllers, industrial control planes, and single-board computing platforms. It is also deployed in defense and aerospace packet-processing subsystems where the extended temperature range is required. When designing with this part, pay close attention to PCB layout for the 780-ball BGA, ensure proper power-rail sequencing, and validate that DDR3 memory topology meets the signal-integrity budget for the chosen operating frequency. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ
P2041NXE1MMB - QorIQ P2 4-Core 1.2GHz PowerPC MCU | NXP
P2041NXE1MMB

P2041NXE1MMB - QorIQ P2 4-Core 1.2GHz PowerPC MCU | NXP

The NXP (formerly Freescale) P2041NXE1MMB is a quad-core PowerPC e500mc microprocessor in the QorIQ P2 communications processor family, integrating four 32-bit cores running at 1.2 GHz inside a 780-ball FCBGA measuring 23 x 23 mm. The P2041 part is intended for mid-range wired and wireless networking, line-card control-plane, and industrial telemetry workloads where deterministic performance and Power Architecture software compatibility are required. Per the QorIQ P2040/P2041 datasheet family, the device supports 32-bit Power Architecture with hypervisor and virtualization assist, hardware-accelerated pattern matching, and encryption acceleration for IPsec, SSL/TLS, and 802.1AE MACsec data paths. The MMB suffix indicates the industrial -40C to +105C operating temperature grade with 1200 MHz core frequency. The NXE designator marks the security-enabled (encrypted) silicon revision r1.1. Background: A communications processor is a system-on-chip (SoC) class of microprocessor that combines general-purpose CPU cores, high-speed serial interfaces, packet-processing engines, security accelerators, and memory controllers on a single die. QorIQ P-series parts sit within the broader Power Architecture ecosystem and are software-compatible across P1, P3, P4, and P5 families, enabling code reuse. Multicore communications processors are widely used in routers, switches, base stations, industrial gateways, and military radios where deterministic throughput and packet-latency budgets matter more than raw single-thread speed. Key features include four e500mc cores at 1.2 GHz with shared L2 cache, three 10/100/1000 Mbps enhanced triple-speed Ethernet controllers, five high-speed serial RapidIO or SerDes lanes, DDR3/DDR3L SDRAM controller with ECC support, integrated security engine (SEC 4.0) for IPsec and SSL, PCI Express Gen 2.0 controllers, and a 32-bit local bus. The 780-FCBGA package exposes extensive SerDes, Ethernet, and memory interfaces while supporting industrial-grade thermal operation from -40C to +105C. Typical applications include enterprise routers and switches, multi-service access nodes, industrial control-plane processors, LTE small-cell base stations, secure VPN gateways, and military/aerospace communications. Designers choose the P2041 when four cores deliver sufficient throughput but the larger P4040/P4080 power envelope is overkill. The encrypted NXE silicon variant is required for secure boot and tamper-resistant key storage in defense and critical infrastructure deployments. When designing with this device, allocate adequate PCB area for the 780-ball FCBGA fan-out, follow NXP AN3949 thermal recommendations for the FCBGA heat-spreader attachment, and validate DDR3 signal integrity with IBIS models before tape-out. Confirm long-term supply through NXP's product longevity program, since QorIQ P2 parts have transitioned through several end-of-life announcements. This page synthesizes distributor pricing, drop-in alternatives, and design notes not found in the manufacturer datasheet alone, including verified stock at distributors such as Rochester Electronics and indicative unit pricing as of 2026-10-16.

見積もり お問い合わせ
P2041NXE1PNB - QorIQ P2 4-Core 1.5GHz PowerPC MPU | NXP
P2041NXE1PNB

P2041NXE1PNB - QorIQ P2 4-Core 1.5GHz PowerPC MPU | NXP

The NXP P2041NXE1PNB is a quad-core PowerPC e500mc microprocessor from the QorIQ P2 family, operating at 1.5 GHz and housed in a 780-ball FC-PBGA (23x23 mm) package. It supports 32-bit processing with hardware-accelerated cryptography and SEC (Security Engine) acceleration, offering high-end architectural features for networking, industrial, and aerospace applications. A microprocessor (MPU) is a single-chip CPU that integrates arithmetic logic, control unit, cache, and I/O interfaces onto one silicon die, forming the core compute engine of an embedded system. The QorIQ P2 platform sits within the broader NXP communications processor hierarchy (P1 < P2 < P3/P4/P5), combining low power consumption with high per-core performance for mid-range quad-core workloads. Key features include four e500mc cores at 1.5 GHz, integrated SEC for cryptographic offload, DDR3 memory controller with ECC support, multiple Ethernet interfaces, and extended temperature grade operation. The device targets the low-end to mid-range of the quad-core communications space and is software-compatible with all P1, P3, P4, and P5 family devices, enabling scalable firmware reuse across product lines. The P2041 architecture combines out-of-order execution with SMP support across cores, hardware virtualization, and advanced power management. The SEC block offloads AES, 3DES, RSA, ECC, and other cryptographic algorithms, offloading the cores for packet processing and control-plane operations. Typical applications include enterprise routers, network switches, industrial control, military/aerospace computing, and secure communications platforms. The extended temperature grade makes P2041NXE1PNB suitable for harsh-environment deployments where commercial-grade parts cannot operate. When designing with this MPU, ensure proper thermal management via the exposed die and adequate PCB layer stack-up for the 780-ball BGA fan-out. Validate supply rail sequencing and decoupling per NXP hardware design guidelines. This page synthesizes drop-in alternates within the P2041/P2040 family, current distributor pricing, and applied engineering notes not found in the manufacturer datasheet.

見積もり お問い合わせ
P2041NXE7MMC - QorIQ 4-Core 1.2GHz SoC, 780-FCBGA | NXP Semiconductors
P2041NXE7MMC

P2041NXE7MMC - QorIQ 4-Core 1.2GHz SoC, 780-FCBGA | NXP Semiconductors

The NXP Semiconductors P2041NXE7MMC is a QorIQ P2-series quad-core communications processor built on the 32-bit Power Architecture e500mc core, integrating four cores running at up to 1.2 GHz in a 780-pin FCBGA (23x23 mm) package with industrial temperature grade -40C to +105C. The device integrates DDR3/DDR3L memory controllers with ECC, multiple high-speed serial interfaces including PCIe, SATA, and Serial RapidIO (SRIO), 1 GbE and 10 GbE MACs, and a security engine (SEC). It is positioned as a high-integration System-on-Chip for mid-range networking, wireless baseband, and industrial control applications. A QorIQ communications processor is a highly-integrated SoC designed for embedded networking and data-plane workloads, combining general-purpose CPU cores with hardware accelerators for packet processing, cryptography, and high-speed I/O. Within the broader taxonomy, the P2041 belongs to the PowerPC/Power Architecture family of microprocessors, falls within the communications processor segment, and bridges the gap between low-end single-core devices and high-end multicore CPUs such as the P4 family. It is software-compatible with P1, P3, P4, and P5 families, enabling design reuse across the QorIQ portfolio. Key features include four Power Architecture e500mc cores at 1.2 GHz, dual DDR3/DDR3L controllers with 64-bit data width and ECC, three PCI Express Gen2 controllers, two SATA 2.0 ports, four Serial RapidIO (SRIO) ports, four 1 GbE controllers, one 10 Gigabit Ethernet (XAUI) MAC, an integrated security engine supporting DES, 3DES, AES, SHA, RSA, and ECC, and a 32-bit local bus. The device operates from a typical 1.0V core supply with separate voltage rails for the DDR I/O and SerDes blocks. The SoC is implemented in 45 nm CMOS process technology and supports hypervisor-aware virtualization, advanced power management with dynamic frequency scaling, and extensive debugging via JTAG and run-control. The high level of integration reduces board complexity by eliminating the need for discrete packet processors, crypto accelerators, and memory controllers in many designs. Typical applications include multiservice routers and gateways, LTE and WiMAX base stations, network-attached storage (NAS), industrial Ethernet switches, factory automation controllers, and defense/aerospace networking. The integrated security engine makes it especially well suited to IPsec VPN gateways and secure CPE devices. This part is in the EOL phase per the NXP product page; design teams should evaluate the listed alternatives for new designs. When designing with the P2041NXE7MMC, pay close attention to power sequencing, DDR3L signal integrity (the SoC requires matched-length routing and 50 ohm controlled impedance), and SerDes reference clock quality. Adequate thermal relief is required because the FCBGA package can dissipate more than 10W under sustained multi-core load. This page consolidates distributor pricing, verified drop-in QorIQ alternatives within the same 780-FCBGA footprint, and design considerations for industrial-temperature networking designs.

見積もり お問い合わせ
P2041NXN1MMB - QorIQ P2041 Quad-Core 1.2GHz PowerPC MPU | NXP
P2041NXN1MMB

P2041NXN1MMB - QorIQ P2041 Quad-Core 1.2GHz PowerPC MPU | NXP

The NXP QorIQ P2041NXN1MMB is a quad-core 32-bit PowerPC e500mp microprocessor running at 1.2 GHz, housed in a 780-pin FCBGA (23x23 mm) package with industrial -40C to +105C temperature rating. It belongs to NXP's QorIQ P2 communications processor family and is software-compatible with the P1, P3, P4, and P5 families. What is a QorIQ communications processor? A QorIQ communications processor is a multicore system-on-chip designed for networking, telecom, and embedded data-plane workloads. It sits within the broader embedded microprocessor taxonomy (MPU -> SoC -> communications processor -> multicore SoC). QorIQ platforms integrate CPU cores, high-speed I/O (SerDes, Ethernet MACs, PCIe, SATA), security engines, and memory controllers on a single die to deliver deterministic throughput for packet processing, industrial control, and secure routing. The P2 series (P2040/P2041) brings high-end datapath acceleration originally pioneered in P4 silicon into a low-to-mid power envelope, enabling cost-sensitive fanless designs. Key features include four PowerPC e500mp cores with hardware hypervisor support, integrated 45 nm process technology, dual memory controllers for DDR3/DDR3L with ECC, three PCIe Gen2 controllers, ten Gigabit Ethernet ports, and an SoC security engine (SEC 4.0). The device operates across -40C to +105C industrial temperature range, making it suitable for harsh environments. On-chip accelerators include QUICC Engine technology, DPAA-style packet handling primitives, and pattern-matching for IPSec and deep packet inspection. Typical applications span enterprise routers, industrial Ethernet switches, LTE base station baseband, secure network appliances, factory automation controllers, and single-board computers for aerospace/defense. The combination of four cores at 1.2 GHz, hardware virtualization, and security offload makes the P2041 a strong fit for multi-service access nodes and embedded intelligent edge platforms. When designing with the P2041, allocate adequate PCB area for the 780-ball FCBGA and use at least 6 layers with matched-impedance routing for DDR3 traces. Thermal design must dissipate up to approximately 12 W under full quad-core load - a heatsink plus thermal interface material and adequate airflow are typically required. Power sequencing requires a NXP-compatible VRM solution that supports the core and platform voltage rails within the SOF specification. This page synthesizes distributor availability, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ