マイクロコントローラ

製品 (18738)

ATSAMD20G16B-ANT - 64KB Flash Cortex-M0+ MCU 48MHz | Microchip
ATSAMD20G16B-ANT

ATSAMD20G16B-ANT - 64KB Flash Cortex-M0+ MCU 48MHz | Microchip

The Microchip Technology ATSAMD20G16B-ANT is a 32-bit ARM Cortex-M0+ microcontroller from the SAM D20 family, featuring 64KB of flash memory, 8KB of SRAM, and a 48MHz CPU clock, housed in a 48-pin TQFP (7x7 mm) package. This low-power, high-performance MCU integrates a 12-bit ADC, 10-bit DAC, 256-channel Peripheral Touch Controller (PTC), RTC, and six SERCOM (Serial Communication Interface) modules configurable as I2C, SPI, or UART. A microcontroller (MCU) is a single-chip computer containing a processor core, memory, and programmable peripherals. The Cortex-M0+ is the most energy-efficient ARM core, designed for embedded applications where low power and deterministic interrupt response matter more than raw compute. MCUs sit at the heart of nearly every connected product - from home appliances to industrial sensors - forming the lowest tier of the embedded computing hierarchy (MCU -> SoC -> microprocessor -> computer system). Key features of the ATSAMD20G16B-ANT include 64KB flash, 8KB SRAM, 48MHz CPU, 12-bit ADC, 10-bit DAC, 256-channel PTC for capacitive touch, RTC with calendar mode, six SERCOM modules, and an operating voltage range of 1.62V to 3.63V. The device offers multiple low-power modes (Idle, Standby, Backup, and Off) with typical active current under 5 mA at full CPU speed, making it well suited for battery-powered applications. The ATSAMD20G16B is built on a low-leakage process optimized for energy efficiency, integrating a high-precision 32kHz RTC oscillator and an 8MHz system oscillator with PLL. Its Event System allows inter-peripheral signaling without CPU intervention, freeing the M0+ core for application code. Six SERCOM channels provide flexible mixed-protocol connectivity, and the 12-bit ADC delivers up to 350ksps conversion rate for sensor reading. Typical applications include home automation nodes, consumer electronics with capacitive touch interfaces, smart metering, IoT sensor endpoints, industrial control peripherals, and low-power wireless sensor platforms. The wide 1.62-3.63V supply range and deep sleep currents below 5 uA enable multi-year coin-cell battery operation in remote sensor nodes. When designing with this part, note that the ATSAMD20G16B-ANT ships in 48-TQFP requiring standard SMT assembly, supports SWD debugging via Atmel/Microchip Studio or MPLAB X, and uses the Atmel/Microchip START code configurator for rapid peripheral initialization. Pair it with a 32.768kHz crystal for RTC accuracy and follow Microchip application notes for low-power design patterns. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone manufacturer datasheet, providing a single-source engineering reference for the ATSAMD20G16B-ANT.

見積もり お問い合わせ
ATSAMD20G16B-AUT - 48MHz Cortex-M0+ MCU 64KB Flash | Microchip
ATSAMD20G16B-AUT

ATSAMD20G16B-AUT - 48MHz Cortex-M0+ MCU 64KB Flash | Microchip

The Microchip Technology ATSAMD20G16B-AUT is a 32-bit ARM Cortex-M0+ flash microcontroller from the SAM D20G family, operating at up to 48 MHz with 64 KB of Flash and 8 KB of SRAM, housed in a 48-pin TQFP (7x7 mm) industrial-grade package. Key headline parameters are 64 KB Flash, 8 KB SRAM, 48 MHz core clock, and a 1.62 V to 3.6 V supply range, with operating temperature from -40 °C to +85 °C. What is a Cortex-M0+ microcontroller? An ARM Cortex-M0+ microcontroller is a 32-bit reduced instruction set computing (RISC) core designed for ultra-low-power embedded applications, sitting at the low-power end of the Cortex-M family below Cortex-M3/M4/M7. Microcontrollers are single-chip computers integrating CPU core, non-volatile Flash program memory, volatile SRAM, and a broad set of peripherals such as timers, ADC/DAC, communication interfaces (SERCOM), and general-purpose I/O. In the broader taxonomy: Cortex-M0+ -> ARM Cortex-M -> 32-bit MCU -> microcontroller -> integrated circuit -> semiconductor. The SAM D20 family is Microchip's mainstream low-power Cortex-M0+ line, bridging 8-bit AVR/PIC customers into 32-bit ARM designs. Key features of the ATSAMD20G16B-AUT include a 12-bit ADC with up to 14 channels, a 10-bit DAC, six SERCOM modules configurable as UART/SPI/I2C, a 24-bit Timer/Counter for control applications, a 256-channel Peripheral Touch Controller (PTC), a Real-Time Clock (RTC), and full-speed USB device support. The device is designed for low-power operation with multiple Sleep modes and an event system for CPU-independent peripheral communication. Architecturally, the SAM D20G16B uses a single-cycle hardware multiplier, a Nested Vector Interrupt Controller (NVIC), and Microchip's Atmel START/MPLAB X ecosystem. The integrated SERCOM blocks are highly flexible - each can be reconfigured at runtime among USART, SPI, and I2C, allowing designers to match the silicon to varied peripheral needs without changing hardware. Typical applications include home automation, smart consumer devices, industrial sensor nodes, IoT endpoints, low-cost metering, and human-machine interface (HMI) modules. The wide operating voltage range (1.62 V to 3.6 V) and low-power modes also make it well suited for battery-powered designs. Design consideration: choose the TQFP-48 package when a hand-solderable footprint or socketed prototype is required; use the QFN-48 (SAM D20G18A-MU family) for space-constrained designs. Programming and debug are done via the SWD interface - reserve the SWDIO/SWDCLK pins or plan for board rework. This page synthesizes distributor pricing, drop-in pin-compatible alternatives, and practical design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ
ATSAMD20G16B-MNT - 48MHz ARM Cortex-M0+ MCU, 64KB Flash | Microchip
ATSAMD20G16B-MNT

ATSAMD20G16B-MNT - 48MHz ARM Cortex-M0+ MCU, 64KB Flash | Microchip

The Microchip ATSAMD20G16B-MNT is a 32-bit ARM Cortex-M0+ flash microcontroller from the SAM D20G family, delivering up to 48 MHz CPU clock with 64 KB of flash and 8 KB of SRAM, housed in a 48-pin QFN (7x7 mm) package with exposed thermal pad. It operates from 1.62 V to 3.6 V and targets a wide range of home automation, consumer, metering, and industrial applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O on one die. The ARM Cortex-M0+ is the smallest and most energy-efficient ARMv6-M core, designed for deterministic embedded control with a 2-stage pipeline, Thumb-2 instruction set, and micro trace buffer. Within the MCU taxonomy, this part sits in the Cortex-M0+ -> ARM Cortex -> 32-bit MCU -> microcontroller -> semiconductor hierarchy, optimized for low-power deterministic tasks. Key features include 64 KB (64K x 8) flash, 8 KB SRAM, an integrated 12-bit ADC, a 10-bit DAC, six SERCOM (serial communication) interfaces configurable as UART/SPI/I2C, a 256-channel Peripheral Touch Controller (PTC), a real-time clock (RTC), and the standard Microchip SleepWalking peripheral event system. The device supports up to 38 GPIO and operates across the industrial temperature range of -40 C to +105 C. A built-in 32 kHz internal oscillator and 8 MHz DFLL allow the core to run at full 48 MHz without external crystals, reducing BOM cost. The SAM D20 architecture combines the Cortex-M0+ core with Microchip's Event System, enabling peripherals to trigger one another without CPU intervention - this is the foundation of the device's low-power performance. The PTC peripheral provides robust capacitive touch sensing with up to 256 channels, supporting buttons, sliders, wheels, and proximity sensors through a single die, replacing mechanical switches in harsh environments. Typical applications include home automation controllers (thermostats, smart lighting, appliance HMIs), industrial sensor hubs, low-power wireless sensor nodes paired with sub-GHz or BLE companions, capacitive touch user interfaces, and battery-powered metering devices. The 1.62 V minimum VDD supports direct connection to single-cell Li-ion or 2x AA alkaline chemistries without external regulators. When designing with this device, follow the Microchip schematic checklist: place a 100 nF decoupling capacitor on each VDD pin, connect the exposed pad to a solid ground copper pour, and ensure the SWDIO/SWDCLK lines are length-matched if routing off-board. The -MNT suffix indicates tape-and-reel packaging with the standard QFN 7x7 mm land pattern, while the -MUT (trays) and -MN (lower-temperature) suffixes share the same pinout.

見積もり お問い合わせ
ATSAMD20G16B-MU - 48MHz ARM Cortex-M0+ MCU 64KB Flash | Microchip
ATSAMD20G16B-MU

ATSAMD20G16B-MU - 48MHz ARM Cortex-M0+ MCU 64KB Flash | Microchip

The Microchip Technology ATSAMD20G16B-MU is a 32-bit ARM Cortex-M0+ microcontroller from the SAM D20G family, featuring 64KB of flash memory and 8KB of SRAM, operating at up to 48 MHz, in a 48-pin QFN (7x7 mm) package with exposed thermal pad. The device integrates the Cortex-M0+ core with a single-cycle hardware multiplier and a high-performance peripheral bus, providing efficient deterministic execution for embedded control applications. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (flash), data memory (SRAM), and integrated peripherals such as timers, communication interfaces, and analog blocks. The SAM D20 family sits within Microchip's broader portfolio of ARM Cortex-M microcontrollers (Cortex-M0+ -> Cortex-M family -> ARM architecture -> 32-bit RISC processor), positioning this device as a low-power, high-performance tier suitable for general-purpose embedded designs. Key features include 64KB flash with ECC and 8KB SRAM, a 12-bit 350 ksps analog-to-digital converter (ADC) with up to 14 channels, two 16-bit timers/counters for PWM and capture, multiple SERCOM interfaces supporting I2C, SPI, and UART, and a full-speed USB 2.0 device interface on selected variants. Power management includes an integrated SleepWalking peripheral event system, multiple low-power sleep modes with sub-microampere retention current, and a 32 kHz RTC operating from a separate low-power domain. Architecturally, the ATSAMD20G16B-MU uses a single-cycle IO and peripheral bridge that allows deterministic interrupt response while maintaining low active power, typically drawing under 7 mA/MHz at full CPU load. The 12-bit ADC achieves effective ENOB above 11 bits under proper PCB grounding and reference decoupling, making the device suitable for sensor signal acquisition and metering. Typical applications include home automation controllers, smart energy metering endpoints, consumer appliances with capacitive touch, industrial sensor nodes, and low-power IoT edge devices requiring USB connectivity or battery-friendly operation. The wide operating voltage range of 1.62V to 3.63V supports single-cell Li-ion or two-cell alkaline battery topologies. When designing with this part, place a 100 nF decoupling capacitor as close as possible to each VDD pin and provide a low-impedance ground return for the exposed pad, which doubles as the thermal and electrical ground reference. Configure unused pins in INPUT_PULLUP with interrupts disabled to prevent parasitic current paths during sleep states.

見積もり お問い合わせ
ATSAMD20G16B-MUT - 32-bit Cortex-M0+ MCU, 64KB Flash, 48-QFN | Microchip
ATSAMD20G16B-MUT

ATSAMD20G16B-MUT - 32-bit Cortex-M0+ MCU, 64KB Flash, 48-QFN | Microchip

The Microchip ATSAMD20G16B-MUT is a 32-bit ARM Cortex-M0+ microcontroller from the SAM D20G family, integrating 64KB of Flash and 8KB of SRAM, and operating at up to 48 MHz in a 48-pin QFN (7x7 mm) package with an industrial temperature grade (-40C to +85C) and Tape & Reel packaging. It belongs to Microchip's SAM D20 family of low-power, high-performance Cortex-M0+ MCUs designed for home automation, consumer, metering, and industrial applications, with on-chip peripherals including a 12-bit ADC, 10-bit DAC, 256-channel Peripheral Touch Controller (PTC), RTC, and multiple SERCOM configurable serial interfaces. The 'MUT' suffix denotes a 48-pin QFN package in Tape & Reel format. What is an ARM Cortex-M0+ microcontroller? An ARM Cortex-M0+ MCU is a 32-bit microcontroller built around ARM's smallest, most energy-efficient Cortex-M core, which provides Thumb-2 instruction set compatibility, single-cycle I/O access, and a deterministic interrupt controller (NVIC). It sits at the entry point of the Cortex-M family, above 8-bit microcontrollers like 8051/PIC16 and below Cortex-M3/M4/M7 cores in processing capability. The SAM D20G family adds Microchip's proprietary low-power SleepWalking peripherals, Event System, and SERCOM modules on top of the Cortex-M0+ core, positioning it as a power-optimized general-purpose MCU for connected and battery-powered applications. Key differentiating features of the ATSAMD20G16B-MUT include 64KB of in-system programmable Flash with unique 128-bit serial number, 8KB SRAM, 48 MHz maximum CPU speed, six SERCOM channels configurable as USART/UART/SPI/I2C, a 12-bit 350 ksps ADC with up to 20 channels, a 10-bit 350 ksps DAC, and full-speed USB 2.0 device support (note: USB requires external 48 MHz clock). The integrated PTC supports up to 256 touch channels for capacitive touch buttons, sliders, and proximity sensing without external ICs. Architecturally, the SAM D20G16 uses an event-driven design with Microchip's SleepWalking technology that allows peripherals to evaluate incoming data while the CPU remains in sleep mode, waking only on matched events. The Event System routes peripheral triggers across the chip without CPU intervention, enabling ultra-low standby current of under 1 uA with RTC running. The 48 MHz core draws roughly 7 mA/MHz active, allowing long battery life in intermittent-duty applications. Typical applications include smart home sensor nodes (HVAC, door/window sensors), industrial metering (water/gas/electricity), consumer electronics (wearables, toys, appliances), IoT edge nodes, and human-machine interfaces (touch panels, LED control). The wide operating voltage range (1.62V to 3.63V) supports both single-cell Li-ion battery systems and 3.3V regulated industrial rails. Designers should evaluate power budget versus peripheral set carefully: the SAM D20G16 supports SleepWalking and six Sleep modes down to <1 uA backup, but higher-speed ADC sampling or continuous USB operation will dominate the active current budget. Pin-compatible migration paths within the SAM D20/D21 families exist for higher memory or USB integration needs. This page synthesizes distributor pricing, drop-in alternatives within the SAM D20 family, and practical design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ
ATSAMD20G17A-ANT - 48MHz ARM Cortex-M0+ MCU 128KB Flash 48-TQFP
ATSAMD20G17A-ANT

ATSAMD20G17A-ANT - 48MHz ARM Cortex-M0+ MCU 128KB Flash 48-TQFP

The Microchip Technology ATSAMD20G17A-ANT is a 32-bit ARM Cortex-M0+ flash microcontroller from the SAM D20G family, integrating 128KB of Flash and 16KB of SRAM in a 48-pin TQFP (7x7 mm) package rated for the -40C to +105C industrial temperature range. It operates from a 1.62V to 3.63V supply and runs at up to 48MHz, reaching 2.14 CoreMark/MHz, and is supplied in Tape & Reel packaging per the ANT suffix designation. What is a Cortex-M0+ microcontroller? An ARM Cortex-M0+ is an ultra-low-power 32-bit microcontroller core designed for embedded applications; it sits within the broader microcontroller category which includes 8-bit (AVR, PIC), 16-bit (MSP430), and 32-bit (Cortex-M, RISC-V) families, and is a sub-category of microcontrollers which in turn falls under embedded processors, semiconductors, and electronic components. The M0+ architecture delivers Thumb-2 instruction set efficiency while consuming roughly one-third the energy of older 8-bit cores at equivalent throughput. Key features include the Atmel/Microchip Event System for peripheral interoperation without CPU intervention, up to six SERCOM (serial communication) interfaces that can each be independently configured as UART/USART, SPI, or I2C, a 12-bit ADC with up to 350 ksps sampling, a 10-bit DAC, and multiple timer/counter blocks for PWM and capture. The device also features a full-speed USB 2.0 interface, an internal 32kHz and 8MHz oscillator, and a Peripheral Touch Controller for capacitive touch sensing. The SAM D20G architecture uses single-cycle hardware multiplication and a Nested Vector Interrupt Controller (NVIC) for deterministic interrupt response. Its SleepWalking peripheral gating allows peripherals to wake the CPU only when needed, extending battery life in IoT sensor nodes to years on a single coin cell when paired with appropriate duty cycling. Typical applications include home automation gateways, smart metering, industrial sensor hubs, low-power wireless sensor nodes, consumer electronics with capacitive touch UI, and battery-powered IoT devices. The wide operating voltage range and rich peripheral set also make it well suited for portable medical and fitness devices. When designing with this device, ensure the decoupling network uses a 100nF ceramic capacitor close to each VDD pin plus a bulk 4.7uF capacitor; failure to do so may cause ADC noise pickup. Also note that migrating to the SAM D20 family from legacy AVR requires use of the Atmel/Microchip Studio or MPLAB X IDE with the appropriate CMSIS pack. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet, including engineering trade-offs versus other 48-pin Cortex-M0+ MCUs.

見積もり お問い合わせ
ATSAMD20G17A-AU - 48MHz Cortex-M0+ MCU, 128KB Flash | Microchip
ATSAMD20G17A-AU

ATSAMD20G17A-AU - 48MHz Cortex-M0+ MCU, 128KB Flash | Microchip

The Microchip Technology (formerly Atmel) ATSAMD20G17A-AU is a 32-bit ARM Cortex-M0+ flash microcontroller from the SAM D20G family, operating at up to 48 MHz and housed in a 48-pin TQFP (7x7 mm) package. It integrates 128 KB of Flash program memory and 16 KB of SRAM, executes at 2.14 CoreMark/MHz, and supports a 1.62 V to 3.6 V supply range suitable for single-cell Li-ion or 3.3 V regulated rails. An ARM Cortex-M0+ microcontroller is the smallest and most energy-efficient member of the Cortex-M family, designed for deeply embedded, low-power applications that benefit from a 32-bit instruction set, deterministic interrupt handling, and a rich peripheral ecosystem. It sits within the broader taxonomy of microcontrollers -> embedded processors -> semiconductors, and bridges 8-bit PIC/AVR designs to higher-performance Cortex-M3/M4 cores without sacrificing low-power operation. Key features of the ATSAMD20G17A-AU include the SERCOM-configurable serial engine (up to 6 channels of I2C/SPI/UART), a 14-channel 12-bit ADC with up to 350 ksps sampling, one 10-bit DAC, six 16-bit timer/counters, and a full-speed USB 2.0 device port. Its peripheral touch controller (PTC) supports up to 256 channels for capacitive buttons, sliders, and proximity sensing, enabling HMI designs without external touch ICs. The device employs Microchip's proprietary low-power architecture with multiple SleepWalking-enabled peripherals, six power domains, and a typical active current below 4 mA at 48 MHz. The integrated 32.768 kHz oscillator and fractional PLL reduce external component count, and the Event System allows peripherals to trigger each other autonomously without CPU intervention for ultra-low-power sensor polling. Typical applications include home automation gateways, smart energy metering, industrial sensor nodes, consumer wearables, capacitive touch keypads, and low-cost USB HID peripherals. The wide operating temperature range of -40 C to +85 C makes it equally suitable for indoor consumer devices and harsh industrial environments. When designing with this part, allocate the SERCOM channels early because each one is multiplexed across multiple pads, and plan the PTC layout with sufficient ground flood for reliable capacitive touch SNR. Use Microchip's MPLAB X IDE with the SAMD20 DFP to unlock SleepWalking and Event System configuration. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, accelerating your sourcing and schematic review.

見積もり お問い合わせ
ATSAMD20G17A-AUT - 48MHz Cortex-M0+ MCU 128KB Flash TQFP-48
ATSAMD20G17A-AUT

ATSAMD20G17A-AUT - 48MHz Cortex-M0+ MCU 128KB Flash TQFP-48

The Microchip Technology ATSAMD20G17A-AUT is a 32-bit ARM Cortex-M0+ flash microcontroller from the SAM D20G family, integrating 128KB of Flash and 16KB of SRAM and running at up to 48 MHz in a 48-pin TQFP (7x7 mm) package. The device targets low-power, high-performance embedded applications including home automation, consumer electronics, smart metering, and industrial control, combining the energy efficiency of the Cortex-M0+ core with the peripheral richness of Atmel/Microchip's SAM D20 platform. A microcontroller (MCU) is a single-chip processor that integrates CPU, memory, and peripherals on one die; the ARM Cortex-M0+ is a minimal-footprint 32-bit core optimized for energy-efficient deterministic control, while the SAM D20 family sits one tier below Cortex-M3/M4 parts in the SAM lineup, prioritizing low active current and deep sleep modes over DSP or floating-point performance. Key features of the ATSAMD20G17A-AUT include 128KB of in-application programmable Flash, 16KB SRAM, a six-channel SERCOM-configurable serial interface, a 12-bit ADC and 10-bit DAC, and multiple 16-bit timer/counters. The SERCOM block is the most distinctive feature: each instance can be reconfigured at runtime as I2C, SPI, or USART, allowing the same silicon to serve diverse peripheral mixes without package or pinout changes. The 12-bit ADC achieves up to 300 ksps with hardware averaging and offset compensation. The architecture pairs a single-cycle Cortex-M0+ core with a 2-channel DMA controller and the standard Microchip Event System for inter-peripheral signaling without CPU wake-ups. The integrated FPU-free pipeline keeps deterministic interrupt latency under 12 cycles, and the brown-out detector, watchdog timer, and on-chip 32 kHz RC oscillator reduce external bill-of-materials cost. Typical applications include smart thermostats, sensor hubs, low-cost motor control, USB human-interface devices, battery-powered data loggers, and home-automation gateways. The wide 1.62V to 3.63V operating range supports both single-cell Li-ion and 3.3V regulated rails, while the multiple low-power sleep modes (down to a few microamperes with RTC running) make it well-suited to energy-harvesting designs. When designing in this part, choose decoupling carefully: a single 100 nF plus one bulk 4.7 µF ceramic per supply pin is the standard Microchip reference, and the SERCOM pin mapping must be locked early because pin remapping later in the project typically forces a board spin. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the bare manufacturer datasheet.

見積もり お問い合わせ
ATSAMD20G17A-MN - 48MHz ARM Cortex-M0+ MCU, 128KB Flash, 48-QFN | Microchip
ATSAMD20G17A-MN

ATSAMD20G17A-MN - 48MHz ARM Cortex-M0+ MCU, 128KB Flash, 48-QFN | Microchip

The Microchip Technology ATSAMD20G17A-MN is a 32-bit ARM Cortex-M0+ based microcontroller from the SAM D20G family, operating at up to 48 MHz and integrating 128 KB of Flash and 16 KB of SRAM in a 48-pin QFN (7x7 mm) with an exposed thermal pad. It is part of the Atmel SMART SAM D20 series, a low-power, high-performance flash MCU platform reaching 2.46 CoreMark/MHz that is pin-compatible across the family and supported by the Atmel/Microchip Studio and Atmel Start software ecosystems. The SAM D20G is built around the ARM Cortex-M0+ core, the smallest and most energy-efficient ARM processor available. It is positioned within the broader taxonomy as follows: ARM Cortex-M0+ -> ARM Cortex-M processor -> 32-bit MCU -> microcontroller -> embedded system. This hierarchy places the part in the Cortex-M0+ tier aimed at cost-sensitive, low-power embedded designs that need the ARM instruction set and toolchain maturity. Key features include the Serial Communication Interface (SERCOM) modules that are highly configurable for I2C, SPI, and UART; a 12-bit ADC with up to 12 channels; 10-bit DAC outputs; and full-speed USB 2.0 Device support on selected variants. The device operates from 1.62 V to 3.63 V across the -40C to +105C industrial temperature range, offers low-power Sleep and Standby modes drawing single-digit microampere currents, and integrates an Event System for inter-peripheral signalling without CPU intervention. The 48-QFN package provides a small footprint suitable for space-constrained designs. Typical applications for the ATSAMD20G17A-MN include home automation endpoints, smart metering, industrial sensor nodes, low-power IoT wearables, consumer human-machine interface (HMI) controllers, and battery-powered data loggers. The combination of Cortex-M0+ processing, generous SRAM, and flexible SERCOM peripherals makes it well suited to designs where simple migration from 8-bit AVR parts is desirable. When designing with this device, engineers should evaluate the SleepWalking and Event System features to minimize MCU wake events, place decoupling capacitors close to the multiple VDD pins, and use the exposed pad (EP) for both thermal dissipation and ground return. The ATSAMD20G17A-MN is identical to the ATSAMD20G17A-MU except for the operating temperature range (105C industrial grade vs. 125C extended grade). This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the standalone manufacturer datasheet.

見積もり お問い合わせ
ATSAMD20G17A-MNT - 48MHz Cortex-M0+ MCU 128KB Flash QFN-48 | Microchip
ATSAMD20G17A-MNT

ATSAMD20G17A-MNT - 48MHz Cortex-M0+ MCU 128KB Flash QFN-48 | Microchip

The Microchip Technology ATSAMD20G17A-MNT is a 32-bit ARM Cortex-M0+ flash microcontroller in the SAM D20 family, integrating 128KB of Flash and 16KB of SRAM, operating at up to 48MHz, in a 48-pin QFN (7x7mm) package with industrial -40C to +105C temperature range. The device is specified for 1.6V to 3.6V core/IO supply and delivers 2.14 CoreMark/MHz, balancing deterministic real-time control with deep-sleep power efficiency for battery-aware edge nodes. The -MNT suffix indicates a Matte-Tin lead-free 48-QFN industrial-grade part supplied in Tape & Reel packaging. A 32-bit microcontroller (MCU) is a single-chip processor that integrates CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals such as timers, ADC, DAC, communication interfaces, and GPIO into one package. ARM Cortex-M0+ cores target energy-efficient embedded applications, sit within the hierarchy of microcontroller -> embedded processor -> semiconductor device, and are widely used wherever deterministic interrupt response and low active/sleep current are required. Key features of the ATSAMD20G17A-MNT include the Cortex-M0+ core with single-cycle I/O access for deterministic GPIO control, 128KB in-system programmable Flash plus 16KB SRAM, an 8-channel event system for hardware-triggered peripheral actions, a 12-bit 350ksps ADC, and SERCOM configurable serial interfaces (I2C/SPI/UART). The integrated 32.768kHz oscillator and DFLL/PLL with 48MHz digital frequency lock loop support crystal-less USB device and accurate timing applications. On the architecture side, the SAM D20 uses a Cortex-M0+ pipeline with single-cycle 32-bit multiplier, NVIC with 4-bit priority, and Microchip's Atmel Start/MPLAB X IDE code base. The 48-QFN package exposes up to 38 GPIO, 6 SERCOM channels, one full-speed USB 2.0 device, and a segmented LCD controller on related variants, providing a balanced peripheral set for connected sensor and HMI designs. Typical applications include home automation control panels, smart energy metering, industrial sensor hubs, consumer wearables, low-power wireless sensor nodes paired with external radios, and small human-machine interfaces using GPIO-driven LED or segment LCD indicators. The Cortex-M0+ plus SERCOM architecture suits designs that need flexible communication with limited PCB area. When designing with this part, allocate the 128KB Flash budget to leave at least 8-16KB for a future bootloader (e.g., for OTA via external SPI Flash), and confirm SERCOM pin mapping against the 48-QFN pad layout before PCB layout because SERCOM functions are multiplexed. Use the on-chip DFLL with a 32.768kHz crystal reference for jitter-sensitive timing. This page combines distributor pricing, pin-compatible alternatives, and practical design notes for the ATSAMD20G17A-MNT, complementing the manufacturer datasheet with cross-brand selection guidance not found elsewhere.

見積もり お問い合わせ
ATSAMD20G17A-MU - 48MHz Cortex-M0+ 128KB Flash MCU | Microchip
ATSAMD20G17A-MU

ATSAMD20G17A-MU - 48MHz Cortex-M0+ 128KB Flash MCU | Microchip

The Microchip Technology ATSAMD20G17A-MU is a low-power, high-performance 32-bit ARM Cortex-M0+ flash microcontroller from the SAM D20G family, housed in a 48-pin QFN (7x7 mm) package with an exposed thermal pad. It integrates 128KB of in-system programmable Flash, 16KB of SRAM, and runs at up to 48MHz delivering 2.14 CoreMark/MHz, making it suitable for home automation, consumer, metering, and industrial applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals (ADCs, timers, communication interfaces). The Cortex-M0+ architecture is the smallest and most energy-efficient ARM core designed for embedded use, sitting at the bottom of the Cortex-M hierarchy (M0+ -> M0 -> M3/M4 -> M7) and offering Thumb-2 instruction set compatibility. The SAM D20 family belongs to Microchip's broader SMART portfolio of ARM-based microcontrollers, targeting low-power always-on and battery-powered designs where deterministic real-time response and ease of development (via Atmel Studio / MPLAB X) matter more than raw MHz. Key features include 14 channels of 12-bit ADC with up to 350ksps conversion rate, one 10-bit DAC, six SERCOM interfaces configurable as UART/SPI/I2C, a 32-bit Real-Time Counter (RTC), full-speed USB 2.0 device support via the D21 family, and an integrated Peripheral Touch Controller for capacitive buttons. The Event System allows peripherals to communicate without CPU intervention, reducing latency and power. The device supports 1.62V to 3.63V operation and offers multiple low-power Sleep, Standby, and Backup modes with sub-microamp current consumption. The ATSAMD20G17A-MU uses a single-cycle hardware multiplier and a 2-channel DMA controller to offload CPU-intensive tasks. The 48-QFN package exposes a thermal pad for improved heat dissipation in continuous-operation scenarios and is lead-free / RoHS compliant, suitable for industrial temperature range of -40C to +85C. The IC integrates brown-out detection, a watchdog timer, and an on-chip 32kHz ultra-low-power oscillator for accurate timekeeping in deep-sleep states. Typical applications include IoT sensor nodes, smart metering, capacitive-touch user interfaces, HVAC controllers, and low-power wireless sensor hubs. Designers value the SAM D20 family for its deterministic interrupt latency, free MPLAB X IDE / Atmel START code generation, and broad middleware support (FreeRTOS, ASF, Harmony 3). When designing with the ATSAMD20G17A-MU, plan the PCB layout so that the exposed pad is soldered to a continuous ground plane for thermal and electrical performance. Decoupling requires a 100nF ceramic capacitor close to each VDD pin and a bulk 4.7uF capacitor on the main supply rail. Engineers should use Atmel START or MPLAB Harmony 3 code configurators to generate the SERCOM and ADC peripheral initialization, reducing firmware bring-up time. This page synthesizes distributor pricing from DigiKey/Mouser/LCSC, a curated list of drop-in alternatives within the SAM D20 family, and practical design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ
ATSAMD20G17A-UUT - 128KB Flash Cortex-M0+ MCU, 45-WLCSP
ATSAMD20G17A-UUT

ATSAMD20G17A-UUT - 128KB Flash Cortex-M0+ MCU, 45-WLCSP

The Microchip ATSAMD20G17A-UUT is a low-power, high-performance 32-bit ARM Cortex-M0+ flash microcontroller in the SAM D20 family, housed in a 45-ball WLCSP package and rated for industrial temperature operation. It delivers 128KB of Flash, 16KB of SRAM, and runs at up to 48 MHz while consuming only a few microamps in deep-sleep modes, making it well suited to battery-powered and energy-harvesting designs. A microcontroller (MCU) is an integrated circuit that combines a CPU core, program and data memory, and a rich set of peripherals on a single die. The Cortex-M0+ core used in the SAM D20 family is the smallest and most energy-efficient member of the ARM Cortex-M lineup, designed for deterministic embedded control with a minimal instruction set, hardware single-cycle I/O access, and an integrated Nested Vectored Interrupt Controller (NVIC). Within Microchip's portfolio this part sits in the hierarchy: SAM D20 family -> SAM D microcontroller series -> ARM Cortex-M0+ MCUs -> 32-bit microcontrollers -> embedded ICs. Key features include the SERCOM peripheral architecture that allows each of the up to six serial communication interfaces to be configured as UART, SPI, or I2C, a 12-bit ADC with up to 16 channels, a 10-bit DAC, multiple 16-bit timer/counters, and a full-speed USB 2.0 device interface on selected variants. The on-chip Flash can be programmed via SWD and the device supports a wide 1.62V to 3.6V supply range. The WLCSP-45 package enables compact PCB footprints for wearables and space-constrained IoT modules, with all digital I/O remappable through the peripheral multiplexing layer. Typical applications span home automation sensor nodes, smart metering, consumer HID peripherals, low-cost industrial control, and battery-powered IoT endpoints. Design considerations include careful WLCSP PCB land-pattern and reflow-profile management, providing a clean low-noise analog supply for ADC accuracy, and configuring the SERCOM peripherals via the Microchip ASF or Harmony 3 framework to map signals to the desired pads.

見積もり お問い合わせ
ATSAMD20G18A-ANT - ARM Cortex-M0+ 48MHz 256KB Flash MCU | Microchip
ATSAMD20G18A-ANT

ATSAMD20G18A-ANT - ARM Cortex-M0+ 48MHz 256KB Flash MCU | Microchip

The Microchip Technology ATSAMD20G18A-ANT is a 32-bit ARM Cortex-M0+ based flash microcontroller from the SAM D20G family, delivering up to 48MHz CPU clock speed with 256KB of Flash and 32KB of SRAM in a 48-pin TQFP (7x7 mm) industrial-grade package rated for -40C to +105C operation. The device is part of Microchip's popular SAM D20 series and integrates the Cortex-M0+ core with single-cycle hardware multiplier, a 12-channel 12-bit 1 MSPS ADC, two I2C, up to six SERCOM-configurable serial interfaces, and a full-speed USB 2.0 device controller with embedded transceiver. What is a Cortex-M0+ microcontroller? The ARM Cortex-M0+ is the smallest and most energy-efficient member of the Cortex-M processor family, designed for deeply embedded applications that require deterministic real-time behaviour, low active and sleep power, and ease of programming in C. The Cortex-M0+ sits within the broader taxonomy of 32-bit microcontrollers -> ARM Cortex-M -> ARM microcontrollers -> embedded microcontrollers -> integrated circuits, and the SAM D20G family positions itself as an ultra-low-power general-purpose MCU line from Microchip. The single-cycle hardware multiplier and the Microchip SleepWalking peripheral event system are key architectural differentiators. Key features of the ATSAMD20G18A-ANT include the 48MHz Cortex-M0+ core reaching 2.46 CoreMark/MHz, 256KB in-system programmable Flash, 32KB SRAM, full-speed USB 2.0 device with on-chip transceiver, 12-bit 1 MSPS ADC with up to 20 channels, two I2C interfaces, six SERCOM modules configurable as UART/SPI/I2C, six 16-bit timers/counters, RTC with calendar mode, and a wide operating voltage range of 1.62V to 3.63V. The 48-TQFP package provides ample GPIO for typical embedded designs while remaining hand-solderable for prototyping. Architecturally, the SAM D20G uses the Cortex-M0+ with a 2-stage pipeline, a single-cycle 32x32 hardware multiplier (replacing the older 32-cycle software emulation), and a Nested Vectored Interrupt Controller (NVIC) with 32 interrupt sources. The Event System allows peripherals to communicate without CPU intervention, dramatically reducing active power consumption. The Power Manager supports multiple sleep modes (Idle, Standby, Backup) with fast wake-up, and the USB 2.0 Full-Speed controller includes an on-chip transceiver that eliminates the need for an external PHY. Typical applications include USB HID devices, IoT sensor nodes, home automation controllers, consumer electronics, smart metering, industrial control, and human-machine interface (HMI) panels. The combination of USB, ADC, and SERCOM flexibility makes the ATSAMD20G18A-ANT especially well suited to designs where a small footprint MCU must bridge to legacy RS-485 buses, sensors, and USB hosts simultaneously. When designing with this part, ensure that the decoupling network uses at least one 100nF X7R capacitor placed as close as possible to each VDD pin pair, plus a bulk 4.7uF capacitor for the USB 3.3V rail. The full-speed USB DP/DM traces must be routed as a 90-ohm differential pair with length matching within 150 mils. Developers should plan to use the Atmel/Microchip START toolchain or MPLAB X IDE with the DFP (Device Family Pack) and the ASF4 framework to accelerate firmware development. This page synthesizes distributor stock and pricing snapshots, same-family drop-in alternatives, and practical design notes not aggregated on any single distributor or manufacturer page, giving engineers a one-stop reference for the ATSAMD20G18A-ANT.

見積もり お問い合わせ
ATSAMD20G18A-AU - 48MHz Cortex-M0+ MCU 256KB Flash | Microchip
ATSAMD20G18A-AU

ATSAMD20G18A-AU - 48MHz Cortex-M0+ MCU 256KB Flash | Microchip

The Microchip ATSAMD20G18A-AU is a 32-bit ARM Cortex-M0+ flash microcontroller from the SAM D20 family, featuring 256 KB of Flash, 32 KB of SRAM, and a maximum CPU clock of 48 MHz, housed in a 48-pin TQFP (7x7 mm) package with industrial-grade -40C to +85C operating range. The SAM D20G series reaches 2.14 CoreMark/MHz and integrates a 12-bit ADC, 10-bit DAC, up to 38 GPIO pins, a 256-channel Peripheral Touch Controller (PTC), and a full RTC subsystem, giving the designer an analog-rich mixed-signal platform in a compact footprint. What is a Cortex-M0+ microcontroller? A microcontroller (MCU) is a single-chip computer integrating a CPU core, program memory (Flash), working memory (SRAM), and peripherals such as ADC, timers, and communication controllers. The Cortex-M0+ is ARM's smallest, most energy-efficient application processor core, targeting cost-sensitive and battery-powered embedded designs. The ATSAMD20G18 belongs to the hierarchy: microcontroller -> ARM Cortex-M0+ MCU -> 32-bit MCU -> SAM D20 family -> low-power MCU, suitable for home automation, consumer, metering, and industrial nodes. Key features include 256 KB in-system programmable Flash (supporting Atmel/Microchip SAM-BA bootloader and SWD programming), 32 KB SRAM, a 12-bit 350 ksps ADC with up to 14 channels, a 10-bit 350 ksps DAC, six SERCOM channels configurable as USART/SPI/I2C, a 24-bit timer/counter for control applications, and a 32 kHz RTC. The device supports 1.62 V to 3.63 V single-supply operation and integrates an 8-channel Event System and a Peripheral Touch Controller for capacitive touch user interfaces. The ATSAMD20G18A-AU uses a 2-layer AHB bus matrix with separate code and data buses for deterministic interrupt latency, plus a low-power SleepWalking peripheral event fabric that wakes individual peripherals from sleep without waking the CPU, enabling < 10 uA/MHz active and deep-sleep currents below 1 uA. The 48-pin TQFP package provides easy hand-soldering and broad PCB layout compatibility for industrial designs. Typical applications include smart-home lighting controllers, low-power wireless sensor hubs, capacitive touch user interfaces for consumer appliances, industrial motor control FOC commutation blocks, battery-powered metering endpoints, and USB-to-UART bridge firmware development kits. The wide 1.62-3.63 V supply range and PTC peripheral make it a strong fit for IoT end nodes and human-machine interface panels. When designing with this part, allocate the 256 KB Flash carefully: a full Atmel/Microchip ASF or Harmony 3 stack with USB and graphics consumes 100-150 KB, leaving 100-150 KB for application code. Use the SWD header for in-circuit programming rather than relying on the bootloader pin only, and provide a 32.768 kHz crystal if RTC accuracy is required below 2 percent error.

見積もり お問い合わせ
ATSAMD20G18A-AUT - 48MHz Cortex-M0+ MCU 256KB Flash | Microchip
ATSAMD20G18A-AUT

ATSAMD20G18A-AUT - 48MHz Cortex-M0+ MCU 256KB Flash | Microchip

The Microchip ATSAMD20G18A-AUT is a 32-bit ARM Cortex-M0+ flash microcontroller running at 48 MHz with 256 KB of Flash and 32 KB of SRAM, housed in a 48-pin TQFP (7x7 mm) package. It belongs to the SAM D20 family, which targets low-power, high-performance embedded applications and integrates an SERCOM-configurable serial interface, a 12-bit ADC, a 10-bit DAC, and a 256-channel Peripheral Touch Controller (PTC). The -AUT suffix indicates automotive-grade qualification and 100% matte-tin lead-free TQFP packaging on tape-and-reel. An ARM Cortex-M0+ microcontroller is a 32-bit RISC processor core designed by Arm for energy-efficient embedded use. It implements the Thumb-2 instruction subset and typically reaches 0.9 DMIPS/MHz while consuming far less dynamic power than older Cortex-M3/M4 cores, making it ideal for battery-powered and always-on products. Within the broader microcontroller taxonomy it sits below Cortex-M3/M4 parts but above 8-bit AVR/PIC cores in both performance and energy efficiency, and it powers the entire SAM D family of microcontrollers. Key features include six SERCOM blocks, each independently configurable as USART, I2C, or SPI; a 12-bit 350 ksps ADC with up to 14 channels; a 10-bit 350 ksps DAC; full-speed USB 2.0 device (on selected variants); and an Event System for inter-peripheral signalling without CPU wake-up. Power domains are organized into RUN, IDLE, STANDBY, and BACKUP modes, with sleep current as low as a few microamps depending on configuration, enabling multi-year coin-cell battery life. The device uses a two-stage AHB/APB bus matrix with deterministic interrupt latency of 12 cycles. The 256 KB Flash is ECC-protected in 4 KB blocks, and the 32 KB SRAM is split into primary and low-power backup sections. A Real-Time Clock with calendar mode and a 32 kHz crystal driver support timekeeping in BACKUP mode. Typical applications include home-automation gateways, smart-metering endpoints, HVAC sensor nodes, automotive body and HMI controllers, low-cost consumer appliances, and industrial sensor hubs. The wide operating voltage range of 1.62 V to 3.63 V lets the part run directly from a single Li-ion or 2x AA battery stack. When designing with this part, pay close attention to decoupling and trace length on the analog AVVDD rail; place a 100 nF ceramic directly at each AVDD pin and a 10 uF bulk nearby. Configure unused pins as input with internal pull-up and disable unused peripherals in the PMUX/CLOCK registers to minimize sleep current. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not collected in any single manufacturer document.

見積もり お問い合わせ
ATSAMD20G18A-MU - ARM Cortex-M0+ 48MHz 256KB MCU | Microchip
ATSAMD20G18A-MU

ATSAMD20G18A-MU - ARM Cortex-M0+ 48MHz 256KB MCU | Microchip

The Microchip Technology ATSAMD20G18A-MU is a 32-bit ARM Cortex-M0+ microcontroller from the SAM D20 family, delivering up to 48 MHz CPU clock speed with 256 KB of Flash and 32 KB of SRAM, housed in a 48-pin QFN (7x7 mm) package. It integrates a 2.14 CoreMark/MHz processor with single-cycle hardware multiply and a high-performance peripheral set including SERCOM (configurable serial communication), 12-bit ADC, 10-bit DAC, and RTC. An ARM Cortex-M0+ microcontroller (MCU) is a low-power, energy-efficient 32-bit processor core designed by ARM Holdings, commonly used in embedded systems that require deterministic real-time performance at low cost. The Cortex-M0+ sits in the hierarchy microcontroller -> embedded processor -> SoC -> semiconductor IC, and the SAM D20 series extends it with Microchip's peripheral mix and event system for low-power IoT and industrial designs. Key features of the ATSAMD20G18A-MU include six SERCOM interfaces configurable as USART, I2C, or SPI; a 12-bit 350 ksps ADC with up to 14 channels; a 10-bit 350 ksps DAC; a 16-bit timer/counter; an RTC with calendar mode; and a full-speed USB 2.0 device interface. The device operates from 1.62V to 3.63V and supports Sleep, Idle, Standby, and Backup low-power modes with typical active current under 3 mA at 48 MHz. The ATSAMD20G18A-MU uses a Harvard-bus architecture with single-cycle I/O access and an integrated Peripheral Event System that allows peripherals to communicate without CPU intervention, reducing latency and power. The 256 KB Flash is organized in two banks for in-application programming, supporting live firmware updates. The SAM D20 family is code-compatible with SAM D10 and SAM D21, easing migration. Typical applications include IoT sensor nodes, smart home automation, industrial metering and HMI, consumer electronics, BLE beacons (paired with external transceivers), and low-power motor control. The combination of Cortex-M0+ efficiency, generous memory, and flexible SERCOM peripherals addresses cost-sensitive yet feature-rich designs. Designers should pay attention to the 1.62V minimum supply for full-speed USB operation, the need for proper decoupling on each VDD pin, and the use of Microchip's Atmel Studio / MPLAB X IDE with the ASF or Harmony 3 frameworks. Programming is supported via SWD using tools such as Atmel-ICE or MPLAB PICkit 4. This page consolidates distributor pricing, verified drop-in SAM D20 alternatives, and practical design notes for the ATSAMD20G18A-MU that are not directly listed in the manufacturer datasheet, helping engineers select and source the part efficiently.

見積もり お問い合わせ
ATSAMD20J14A-AN - 48MHz Cortex-M0+ MCU 16KB Flash | Microchip
ATSAMD20J14A-AN

ATSAMD20J14A-AN - 48MHz Cortex-M0+ MCU 16KB Flash | Microchip

The Microchip Technology ATSAMD20J14A-AN is a 32-bit ARM Cortex-M0+ microcontroller from the SAM D20J family, delivering 48MHz core performance, 16KB of Flash program memory, and 2KB of SRAM in a 64-pin TQFP (10x10mm) package. The SAM D20 family is built on Microchip's proprietary low-power process and integrates a high-performance peripheral set including SERCOM (configurable serial communication), 12-bit ADC, 10-bit DAC, and RTC, making it suitable for a broad range of embedded designs. The industrial temperature grade of -40C to +105C supports deployment in harsh environments. Background Knowledge: A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory (Flash for program code and SRAM for runtime data), and programmable peripherals onto one die. The Cortex-M0+ is ARM's smallest and most energy-efficient 32-bit core, designed for cost-sensitive and low-power embedded applications. Microcontrollers fall within the broader hierarchy of integrated circuits -> microcontrollers -> 32-bit microcontrollers -> ARM Cortex-M microcontrollers -> Cortex-M0+ microcontrollers. The SAM D20 line is Microchip's entry-level Cortex-M0+ family targeting IoT, sensor hubs, and human-interface designs. Key features include the Cortex-M0+ core with single-cycle IO and a 32-bit hardware multiplier, full-speed USB 2.0 device interface on selected variants, up to six SERCOM modules each configurable as UART, SPI, or I2C, a 12-bit 350ksps SAR ADC with up to 20 channels, a 10-bit 350ksps DAC, and a 16-bit Sigma-Delta ADC option on higher-end variants. The integrated event system allows peripherals to communicate without CPU intervention, reducing latency and power consumption. Typical applications include wearable electronics, IoT sensor nodes, industrial automation controllers, low-power wireless sensor hubs, and consumer HMI devices such as touch-button panels. The 64-pin TQFP footprint offers ample GPIO (up to 52) for designs requiring multiple interfaces. When designing with this MCU, place a 0.1uF decoupling capacitor adjacent to each VDD pin and a 4.7uF bulk capacitor on the main supply rail. The SAM D20 internal LDO powering the core may require an external 1uF bypass. Use Atmel Studio 7 or MPLAB X IDE for firmware development, with Atmel-ICE or SAM-ICE debug probes supported via SWD. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, with cross-brand equivalents identified for engineers evaluating second-source options.

見積もり お問い合わせ
ATSAMD20J14A-AU - 48MHz Cortex-M0+ MCU 16KB Flash | Microchip
ATSAMD20J14A-AU

ATSAMD20J14A-AU - 48MHz Cortex-M0+ MCU 16KB Flash | Microchip

The Microchip Technology (formerly Atmel) ATSAMD20J14A-AU is a 32-bit ARM Cortex-M0+ microcontroller with 16KB of Flash and 2KB of SRAM, housed in a 64-pin LQFP (10x10 mm) package. It operates at up to 48 MHz from a 1.62V to 3.6V supply and includes a 12-bit ADC, 10-bit DAC, and the SAM D20 series peripheral set including SERCOM, TC, and EVENT system. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals such as ADCs, timers, and communication interfaces. Within the broader hierarchy, this part is a Cortex-M0+ based microcontroller -> ARM-based MCU -> 32-bit microcontroller -> embedded controller -> semiconductor IC. The Cortex-M0+ core is the smallest and most energy-efficient member of the ARM Cortex-M family, designed for deterministic real-time performance at very low active and sleep currents, making it a fit for battery-powered and cost-sensitive embedded designs. Key features include 16KB Flash / 2KB SRAM, six SERCOM modules that can each be configured as USART, I2C, or SPI, up to 48 MHz core clock, a 12-bit 350 ksps ADC with up to 14 channels, and a 10-bit 350 ksps DAC. The device supports both 1.62V to 3.6V single-supply operation and features the Microchip Event System for inter-peripheral signaling without CPU intervention. The ATSAMD20J14A-AU uses a two-stage pipelined Cortex-M0+ core with single-cycle I/O access through the AHB/APB bridge matrix, single-cycle multiplier, and a low-power SleepWalking peripheral architecture that lets SERCOM, TC, and ADC run autonomously while the CPU sleeps, reducing system-level power. Typical applications include IoT sensor nodes, consumer electronics HMI subsystems, industrial control peripherals, USB HID bridges (with on-chip pull-ups), and home automation controllers. In each case the part provides deterministic Cortex-M0+ compute plus SERCOM-based connectivity without requiring an external PHY. When designing with this part, reserve pin 1 (VDDIO) and pin 34 (VDDIN) decoupling with at least 100nF X7R capacitors placed within 2 mm of each pin, and ensure the NRST pull-up is at least 10 kohm to guarantee a clean power-on reset. This page consolidates distributor pricing, drop-in alternatives from the same SAM D20 family, and practical design notes not collected on a single distributor listing.

見積もり お問い合わせ
ATSAMD20J14A-AUT - 48MHz Cortex-M0+ MCU 16KB Flash LQFP-64
ATSAMD20J14A-AUT

ATSAMD20J14A-AUT - 48MHz Cortex-M0+ MCU 16KB Flash LQFP-64

The Microchip Technology ATSAMD20J14A-AUT is an ARM Cortex-M0+ based 32-bit microcontroller from the SAM D20J family, delivering up to 48 MHz CPU performance with 16 KB of Flash and 2 KB of SRAM in a 64-pin LQFP package (10x10 mm). It is designed for low-power, high-performance embedded applications spanning home automation, consumer electronics, metering, and industrial control. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and a rich set of peripherals (timers, ADC, communication interfaces, GPIO). Within the broader taxonomy, the ATSAMD20J14A belongs to the ARM Cortex-M0+ class of microcontrollers, which targets ultra-low-power and cost-sensitive applications while retaining the ARM Thumb instruction set. The Cortex-M0+ sits at the entry point of the Cortex-M family (M0/M0+ -> M3/M4 -> M7), trading DSP and FPU capability for the smallest die area and lowest active/idle power. Key specifications include a 48 MHz maximum CPU clock, 16 KB Flash program memory, 2 KB SRAM, an 8-channel 12-bit ADC, two I2C, up to six SERCOM (configurable serial), six 16-bit timers, and a 12-channel Event System. The device operates from 1.62 V to 3.63 V, supports Sleep, Idle, and Standby modes with full RAM retention, and features an integrated 32 kHz RTC with calendar mode. Typical applications include battery-powered sensor nodes, HVAC controllers, smart thermostats, low-end wireless gateways (when paired with an external radio), industrial HMI panels, and portable medical accessories. The Cortex-M0+ core provides deterministic interrupt latency suitable for hard-real-time control loops, while the rich SERCOM peripheral set simplifies protocol bridging between I2C sensors, SPI flash, and UART modems. When designing with this part, take care to populate the decoupling network with at least one 100 nF X7R capacitor per VDD pin plus a bulk 4.7 uF tantalum or ceramic capacitor. The brown-out detector and WDT must be configured in firmware; default POR settings do not enable them. The 64-LQFP package allows hand-solderable prototyping as well as high-density SMT assembly. This page synthesizes distributor pricing, pin-compatible drop-in alternates within the SAM D20 family, and practical design notes that go beyond the manufacturer datasheet's basic block diagram to give working engineers decision-ready guidance.

見積もり お問い合わせ
ATSAMD20J14A-CNT - 48MHz ARM Cortex-M0+ MCU, 16KB Flash | Microchip
ATSAMD20J14A-CNT

ATSAMD20J14A-CNT - 48MHz ARM Cortex-M0+ MCU, 16KB Flash | Microchip

The Microchip Technology ATSAMD20J14A-CNT is a 32-bit ARM Cortex-M0+ flash microcontroller from the SAM D20J family, running at up to 48 MHz with 16 KB of flash and 2 KB of SRAM, housed in a 64-ball UFBGA (5x5 mm) package. It is a low-power, high-performance device targeting home automation, consumer, metering, and industrial applications. An ARM Cortex-M0+ microcontroller is one of the smallest, most energy-efficient 32-bit processor cores in the ARM Cortex family, designed for deeply embedded applications that need deterministic real-time behaviour, low active power, and deep-sleep currents in the microamp range. The Cortex-M0+ integrates the NVIC, SysTick, Wake-up Interrupt Controller, and optional single-cycle I/O, and it sits in a hierarchy of microcontroller -> 32-bit MCU -> ARM Cortex-M family -> embedded controller. The SAM D20J family from Microchip/Atmel adds Atmel/Microchip proprietary peripherals on top of this core. Key features of the ATSAMD20J14A-CNT include 16 KB (16K x 8) flash program memory, 2 KB SRAM, an integrated 12-bit ADC, multiple SERCOM (Serial Communication Interface) modules configurable as UART/SPI/I2C, up to 52 I/O pins, and a 1.6-3.6 V operating range. The device supports industrial temperature range up to 105C and is supplied in a green, RoHS-compliant 64-UFBGA package. The architecture uses single-cycle hardware multiply, a Microchip/Atmel event system for inter-peripheral signalling without CPU intervention, and the SleepWalking peripheral that can wake the CPU based on peripheral events. Together with the Cortex-M0+ core these features deliver higher deterministic performance per MHz than legacy 8-bit/16-bit MCUs while staying within tight power budgets. Typical applications include home automation nodes, smart metering endpoints, consumer electronics HMI, low-cost sensor hubs, and industrial control blocks where deterministic 32-bit performance and tiny BGA footprint are both required. Industrial-grade temperature range and wide supply range support deployment in harsh electrical environments. When designing, ensure the UFBGA land pattern matches Microchip's reference layout and respect the 1.6-3.6 V supply range; an external reset supervisor is recommended if the host rail is not monotonically stable at power-up. Programming and debugging are handled via the SWD interface using Microchip's Atmel Studio / MPLAB X toolchain. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone manufacturer datasheet.

見積もり お問い合わせ
ATSAMD20J14A-CU - ARM Cortex-M0+ 48MHz 16KB MCU | Microchip
ATSAMD20J14A-CU

ATSAMD20J14A-CU - ARM Cortex-M0+ 48MHz 16KB MCU | Microchip

The Microchip Technology ATSAMD20J14A-CU is a 32-bit ARM Cortex-M0+ microcontroller from the SAM D20J family, integrating 16KB of Flash and 2KB of SRAM, and operating at up to 48 MHz in a 64-ball UFBGA (5x5 mm) package. It operates across a wide 1.62V to 3.63V supply range with on-chip DC-DC and LDO regulators that simplify single-rail designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O. The ARM Cortex-M0+ is the smallest and most energy-efficient member of the Cortex-M family, designed for deterministic real-time embedded tasks. The SAM D20 family (D20J = 64-pin/pad variant) sits within Microchip's 32-bit MCU portfolio above the 8-bit AVR and below the Cortex-M4 SAM D5x/SAM E5x lines, making it a mainstream general-purpose 32-bit MCU. The ATSAMD20J14A-CU features the Cortex-M0+ core with single-cycle I/O access, hardware divide, and a Nested Vectored Interrupt Controller (NVIC) for low-latency interrupt handling. Up to six Serial Communication Interfaces (SERCOM, each configurable as USART, SPI, or I2C), up to two I2S channels, a 12-bit 350 ksps ADC with up to 14 channels, a 10-bit DAC, and a 32-bit RTC round out the peripheral set. Internal 8 MHz and 32 kHz oscillators plus a fractional PLL reduce external component count, while the Full-Speed USB 2.0 device and Host with on-chip transceiver (where present in the family) simplifies connectivity. Low-power operation is central to the design: Idle, Standby, Backup, and Off sleep modes draw microamps or less, making the part attractive for battery-powered and energy-harvesting applications. The integrated Event System allows peripherals to communicate without CPU wake-up, freeing the core for power-down. Typical applications include home automation nodes, smart metering, consumer appliances, industrial sensor hubs, USB human-interface devices (HID), and low-power IoT endpoints. In these scenarios, the 16KB Flash / 2KB SRAM footprint fits small protocol stacks such as BLE beacons (with external radio), Modbus/RTU bridges, or LoRaWAN device firmware, while the SERCOMs and ADC handle sensor interfacing. The wide 1.62V-3.63V range lets the same part run from a single Li-ion cell or 3.3V regulated bus. When designing with the ATSAMD20J14A-CU, plan for the UFBGA-64 footprint using a 0.5 mm or finer pitch PCB process and ensure the exposed paddle under the BGA is properly soldered for thermal and electrical performance. Designers familiar with the SAM D20 family will benefit from Microchip's Atmel Studio / MPLAB X toolchain, ASF (Advanced Software Framework), and free Atmel START configuration. This page synthesizes distributor stock and pricing, same-family alternatives, and practical design notes for the ATSAMD20J14A-CU - information not consolidated in the manufacturer datasheet alone.

見積もり お問い合わせ
ATSAMD20J14A-CUT - SAM D20 32-bit ARM Cortex-M0+ MCU, 16KB Flash | Microchip
ATSAMD20J14A-CUT

ATSAMD20J14A-CUT - SAM D20 32-bit ARM Cortex-M0+ MCU, 16KB Flash | Microchip

The Microchip ATSAMD20J14A-CUT is a 32-bit ARM Cortex-M0+ microcontroller from the SAM D20 family, featuring 16 KB Flash, 2 KB SRAM, and a 48 MHz CPU in a 64-ball UFBGA (5x5 mm) package. The "CUT" suffix denotes the industrial temperature grade (-40C to +85C), green/RoHS-compliant, tape-and-reel packaging variant. Operating voltage spans 1.62 V to 3.63 V, allowing direct connection to 1.8 V, 2.5 V, and 3.3 V rails common in IoT and consumer designs. An ARM Cortex-M0+ microcontroller is the smallest, most energy-efficient member of the ARM Cortex-M family, combining a Thumb-2 instruction set with a single-cycle multiplier and NVIC interrupt controller. The ATSAMD20J14A sits inside the broader microcontrollers (MCU) product category, which falls under integrated circuits (ICs) and ultimately semiconductors in the taxonomy hierarchy. Cortex-M0+ cores are widely chosen for battery-powered and cost-sensitive applications because they deliver 32-bit performance at power levels comparable to 8-bit MCUs. Key features include the Cortex-M0+ core with single-cycle hardware multiply, 16 KB self-programmable Flash, 2 KB SRAM, and the Microchip Event System for inter-peripheral signaling without CPU intervention. The peripheral set comprises up to 52 programmable I/O pins, SERCOM (configurable serial communication) channels, a 12-bit 350 kS/s ADC, a 10-bit DAC, four 16-bit Timer/Counters, and a Real-Time Clock. Full-speed USB 2.0 device support and a Peripheral Touch Controller (PTC) for capacitive touch are integrated on most SAM D20J devices, though exact peripheral count on the J14 die is device-specific. The device leverages Microchip's proprietary Atmel/Microchip low-power design, providing multiple Sleep modes (IDLE, STANDBY, BACKUP) with current consumption down to the low microamp range, suitable for battery-powered end nodes. The integrated Sleepwalking peripheral Event System allows peripherals to wake the CPU only when meaningful events occur, dramatically reducing average power in sensor applications. The Cortex-M0+ pipeline keeps deterministic interrupt latency. Typical applications include IoT sensor nodes, wearable fitness bands, BLE/Bluetooth proximity beacons, low-cost industrial sensor hubs, and consumer Human Interface Devices (HID) such as keyboards and remote controls. The PTC enables touch button or slider interfaces for white goods and consumer appliances. The compact 5x5 mm UFBGA footprint suits space-constrained designs where PCB area is at a premium. When designing with this MCU, allocate decoupling capacitors (100 nF + 1 uF) close to each VDD pin and follow Microchip's recommended DFM layout for the UFBGA escape pattern. Consider ATSAMD20J14A-CNT or ATSAMD20J14A-AUT if a different operating temperature grade or pin-package combination is required; these are pin-to-pin compatible with the CUT variant for design reuse.

見積もり お問い合わせ
ATSAMD20J14A-MNT - 48MHz Cortex-M0+ 16KB Flash MCU | Microchip
ATSAMD20J14A-MNT

ATSAMD20J14A-MNT - 48MHz Cortex-M0+ 16KB Flash MCU | Microchip

The Microchip Technology ATSAMD20J14A-MNT is a 32-bit ARM Cortex-M0+ microcontroller from the SAM D20J family, operating at up to 48 MHz with 16KB of Flash and 2KB of SRAM in a 64-pin QFN (9x9 mm) package. The -MNT suffix denotes tape-and-reel packaging and industrial temperature grade support up to +105 C junction. The device operates from a 1.6 V to 3.6 V supply, reaching 2.14 CoreMark/MHz, and integrates a 6-channel SERCOM for flexible I2C/SPI/UART configuration along with a 12-bit ADC, 10-bit DAC, and multiple timer/counter blocks. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals into one package. ARM Cortex-M0+ cores are the smallest and most energy-efficient members of the Cortex-M family, intended for deterministic real-time embedded control. The SAM D20J family lies within the broader Atmel SMART lineup of Cortex-M microcontrollers, designed for low-power IoT, consumer, and industrial applications where ARM ecosystem compatibility and ultra-low standby current matter. Key features of the ATSAMD20J14A-MNT include its Cortex-M0+ core with single-cycle I/O access, a built-in 32 kHz internal oscillator and 8 MHz to 48 MHz DFLL for clocking flexibility, an event system for inter-peripheral signaling without CPU intervention, and the SAM D20's signature SleepWalking peripheral operation that lets ADCs and SERCOMs run while the CPU is stopped. The part offers 14 SERCOM instances in the 64-pin SAM D20J variants, six of which are bonded out on this package. Designers benefit from Microchip's MPLAB X IDE support, the Harmony 3 framework, and the SAMD20/21 family pin compatibility, which simplifies migration within the portfolio. The QFN package's exposed thermal pad and 9x9 mm footprint enable compact layouts with good thermal dissipation for motor control, sensor hubs, and battery-powered products. Typical applications include IoT sensor nodes, BLE/Wi-Fi co-processor hosts, USB device controllers (with on-chip USB on related parts), industrial sensor interfaces, low-power wearables, and home automation controllers. Engineers also use it as a pin-compatible scaling option when projects move between the SAM D20E (32-pin) and SAM D20G (48-pin) versions within the same family. Design consideration: the ATSAMD20J14A-MNT has only 16KB Flash, which constrains the choice of TCP/IP stacks and Bluetooth libraries. For complex code bases consider ATSAMD20J18A-MNT (256KB) or ATSAMD20G18A-MU. Always include a 1 uF decoupling capacitor on VDD and a 10 nHF on the analog supply AVDD, and follow the reference schematic in the Atmel SMART SAM D20 datasheet to avoid POR and brownout issues. This page synthesizes distributor pricing, drop-in pin-compatible variants, and application notes not found in the bare datasheet, providing a single-point engineering reference for the ATSAMD20J14A-MNT and its place in the Microchip SAM D20 family.

見積もり お問い合わせ
ATSAMD20J14A-MU - ARM Cortex-M0+ MCU 48MHz 16KB Flash | Microchip
ATSAMD20J14A-MU

ATSAMD20J14A-MU - ARM Cortex-M0+ MCU 48MHz 16KB Flash | Microchip

The Microchip Technology ATSAMD20J14A-MU is a 32-bit ARM Cortex-M0+ microcontroller from the SAM D20J family, running up to 48 MHz and integrating 16 KB Flash and 2 KB SRAM in a 64-pin QFN (9x9 mm) package. It is part of the Atmel | SMART SAM D20 low-power MCU series that delivers 2.14 CoreMark/MHz performance and ranges from 32 to 64 pins with up to 256 KB Flash and 32 KB SRAM across the family. An ARM Cortex-M0+ MCU is a 32-bit reduced instruction set computing (RISC) microcontroller core designed by ARM Holdings for low-power embedded applications. The Cortex-M0+ sits within the broader ARM Cortex-M processor family, which in turn belongs to the microcontroller (MCU) category of integrated circuits under the semiconductor hierarchy. Compared with 8-bit MCUs, Cortex-M0+ devices offer higher code density, faster interrupt handling, and a Thumb-2 instruction subset while retaining low active and sleep current. The SAM D20 family targets simple migration with identical peripheral modules, hex-compatible code, a linear address map, and pin-compatible footprints across 32-, 48-, and 64-pin options. Key features include a maximum CPU clock of 48 MHz, 16 KB embedded Flash, 2 KB SRAM, 1.8V/2.5V/3.3V operating voltage support, and a full Cortex-M0+ NVIC with up to 52 maskable interrupts. Integrated peripherals include SERCOM (configurable USART, SPI, I2C), 12-bit ADC, 10-bit DAC, timers, RTC, and event system. The 64-QFN package with exposed pad provides low thermal resistance for the small die, enabling compact designs without an external heatsink at typical embedded current draws. Typical applications include IoT sensor nodes, battery-powered wearables, consumer electronics human-machine interfaces, low-power wireless sensor platforms, USB device controllers, and industrial control front-ends. The event system and sleepwalking peripherals enable microamp-range sleep currents while still responding to asynchronous I/O events. When designing with the SAM D20J, engineers should size the decoupling network per the datasheet and follow Microchip's Atmel Studio / MPLAB X reference designs for the configured peripherals. The 64-pin QFN with exposed pad requires thermal via stitching under the EP for production reliability.

見積もり お問い合わせ