ATSAMD20J14A-MU - ARM Cortex-M0+ MCU 48MHz 16KB Flash | Microchip
部品番号: ATSAMD20J14A-MU ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $3.32 | $3.32 |
| 10 | $2.99 | $29.90 |
| 100 | $2.66 | $266.00 |
| 500 | $2.39 | $1,195.00 |
| 1,000 | $2.12 | $2,120.00 |
ATSAMD20J14A-MU 概要
An ARM Cortex-M0+ MCU is a 32-bit reduced instruction set computing (RISC) microcontroller core designed by ARM Holdings for low-power embedded applications. The Cortex-M0+ sits within the broader ARM Cortex-M processor family, which in turn belongs to the microcontroller (MCU) category of integrated circuits under the semiconductor hierarchy. Compared with 8-bit MCUs, Cortex-M0+ devices offer higher code density, faster interrupt handling, and a Thumb-2 instruction subset while retaining low active and sleep current. The SAM D20 family targets simple migration with identical peripheral modules, hex-compatible code, a linear address map, and pin-compatible footprints across 32-, 48-, and 64-pin options.
Key features include a maximum CPU clock of 48 MHz, 16 KB embedded Flash, 2 KB SRAM, 1.8V/2.5V/3.3V operating voltage support, and a full Cortex-M0+ NVIC with up to 52 maskable interrupts. Integrated peripherals include SERCOM (configurable USART, SPI, I2C), 12-bit ADC, 10-bit DAC, timers, RTC, and event system. The 64-QFN package with exposed pad provides low thermal resistance for the small die, enabling compact designs without an external heatsink at typical embedded current draws.
Typical applications include IoT sensor nodes, battery-powered wearables, consumer electronics human-machine interfaces, low-power wireless sensor platforms, USB device controllers, and industrial control front-ends. The event system and sleepwalking peripherals enable microamp-range sleep currents while still responding to asynchronous I/O events.
When designing with the SAM D20J, engineers should size the decoupling network per the datasheet and follow Microchip's Atmel Studio / MPLAB X reference designs for the configured peripherals. The 64-pin QFN with exposed pad requires thermal via stitching under the EP for production reliability.
ドロップイン代替品: ATSAMD20J14A-MU — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: ATSAMD20J14A-MU （同一形状・フットプリント） — 相違点: Package, ADC, Operating Temperature, Supply Voltage Range, RoHS Status.
クイック比較ツール — 並列比較する代替部品を選択:
ATSAMD20J14A-MUT
✅ ドロップイン✓ 在庫あり
$1.74 / 個
データシートを見る →ATSAMD20J14A-CNT
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$1.95 / 個
データシートを見る →ATSAMD20J14A-AUT
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$1.85 / 個
データシートを見る →ATSAMD20J15A-MU
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
ATSAMD20J18A-MU
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$2.69 / 個
データシートを見る →ATSAMD20J17A-MU
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
ATSAMD20J14A-MU 最大定格＆電気的特性
| Core | ARM Cortex-M0+ (32-bit) |
| Family | SAM D20J |
| 最大クロック周波数 | 48 MHz |
| CoreMark/MHz | 2.14 |
| Program Memory Size | 16 KB Flash |
| RAM Size | 2 KB SRAM |
| データバス幅 | 32 bit |
| Operating Voltage Range | 1.8V / 2.5V / 3.3V |
| パッケージ | 64-QFN (9x9 mm) with EP |
| 実装タイプ | Surface Mount |
| 動作温度 | -40C to +85C (industrial) |
| ADC | 12-bit |
| DAC | 10-bit |
| SERCOM | Yes (configurable USART/SPI/I2C) |
| MSLレベル | 3 |
| RoHS ステータス | Compliant |
ATSAMD20J14A-MU 64-qfn (9x9 mm) with ep ピン配置ガイド
ATSAMD20J14A-MU (64-qfn (9x9 mm) with ep パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: ATSAMD20J14A-MU.
詳細は データシート をご参照ください。
主な用途
ATSAMD20J14A-MU の用途: 6 件s: IoT Sensor Nodes, Battery-Powered Wearables, Consumer HMI Devices, Industrial Control Front-Ends, USB Device Controllers, Low-Power Wireless Sensor Platforms.
IoT Sensor Nodes
The ATSAMD20J14A-MU fits IoT sensor nodes because its 48 MHz Cortex-M0+ core, 16 KB Flash, and 2 KB SRAM are sufficient for typical edge sensing, BLE/Wi-Fi co-processor control, and protocol stack fragments. The event system and sleepwalking peripherals allow microamp-range sleep currents between sensor reads, which is critical for battery-powered deployments. Its 12-bit ADC integrates directly with analog sensor front-ends, and the SERCOM modules provide flexible SPI/I2C/UART connectivity for downstream radios. Engineers can implement low-duty-cycle sampling and event-driven wake on interrupt without external logic, extending battery life to months or years.
おすすめ
Battery-Powered Wearables
Wearable devices benefit from the ATSAMD20J14A-MU's small 64-QFN 9x9 mm footprint, sub-microamp sleep modes, and 1.8V to 3.3V supply flexibility for coin-cell or Li-ion batteries. The Cortex-M0+ delivers 2.14 CoreMark/MHz at low active current, enabling always-on sensor fusion tasks without draining the battery. Its 10-bit DAC supports audio cue generation, and SERCOM interfaces provide connectivity to BLE radios and MEMS sensors. Wearable firmware can run entirely from 16 KB Flash, with 2 KB SRAM sufficient for tinyML-style inference or basic activity classification.
おすすめ
Consumer HMI Devices
The ATSAMD20J14A-MU suits consumer human-machine interfaces because it provides enough performance to drive capacitive touch sensing, LED animations, and small graphical user interfaces. The Cortex-M0+ with 48 MHz clock supports real-time touch scanning through the event system and PWM channels, while 16 KB Flash holds button, gesture, and communication logic. Its 64-pin QFN footprint exposes generous GPIO for matrix keypads, RGB LEDs, and segment displays. SERCOM peripherals can interface to BLE radios or Wi-Fi modules to add wireless connectivity without redesign.
おすすめ
Industrial Control Front-Ends
Industrial sensor and actuator front-ends benefit from the ATSAMD20J14A-MU's industrial -40C to +85C temperature range, robust SERCOM interfaces, and 12-bit ADC for analog signal acquisition. The Cortex-M0+ core handles PID-style control loops and Modbus-RTU communication while consuming modest power. The 64-QFN 9x9 mm package keeps the MCU footprint compact on densely populated PLC or sensor-interface boards. With 16 KB Flash, the part fits typical 4-20 mA loop controllers, simple motor control front-ends, and discrete I/O expansion modules.
おすすめ
USB Device Controllers
Although the ATSAMD20J14A-MU does not include native USB, the SAM D20 family supports USB device operation through external PHY or by using SERCOM plus bit-banged USB stacks for low-speed HID class devices. The 64-QFN footprint exposes enough GPIO to bit-bang USB via the event system and DMA-driven SERCOM, useful for HID peripherals such as custom keyboards, mice, or simple data loggers. The 16 KB Flash holds USB descriptors and small HID report handlers, and the 2 KB SRAM is sufficient for endpoint buffering at low-speed USB rates.
おすすめ
Low-Power Wireless Sensor Platforms
The ATSAMD20J14A-MU is well-matched to low-power wireless sensor platforms that combine an MCU front-end with sub-GHz or 2.4 GHz radios. SERCOM provides SPI/I2C interfaces for SPI-based transceivers such as the Microchip sub-GHz family or third-party LoRa modules, while the event system enables wake-on-radio behavior. The Cortex-M0+ at 48 MHz executes MAC-layer state machines with predictable interrupt latency, and 16 KB Flash accommodates 6LoWPAN, BLE Mesh, or proprietary stacks for simple sensor nodes. Sleep currents under 10 microamp extend battery life across multi-year deployments.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: ATSAMD20J14A-MU — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | ATSAMD20J14A-MUT | ATSAMD20J14A-CNT | ATSAMD20J14A-AUT | ATSAMD20J15A-MU | ATSAMD20J17A-MU | ATSAMD20J18A-MU |
|---|---|---|---|---|---|---|---|
| Package | 64-QFN (9x9 mm) | 64-QFN (9x9 mm) - same | 64-QFN (9x9 mm) - same | 64-QFN (9x9 mm) - same | 64-QFN (9x9 mm) - same | 64-QFN (9x9 mm) - same | 64-QFN (9x9 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core | ARM Cortex-M0+ 32-bit | ARM Cortex-M0+ 32-bit | ARM Cortex-M0+ 32-bit | ARM Cortex-M0+ 32-bit | ARM Cortex-M0+ 32-bit | ARM Cortex-M0+ 32-bit | ARM Cortex-M0+ 32-bit |
| Maximum Clock Frequency | 48 MHz | 48 MHz | 48 MHz | 48 MHz | 48 MHz | 48 MHz | 48 MHz |
| Flash Memory | 16 KB | 16 KB | 16 KB | 16 KB | 32 KB | 128 KB | 256 KB |
| SRAM | 2 KB | 2 KB | 2 KB | 2 KB | 4 KB | 16 KB | 32 KB |
| Operating Voltage | 1.8V / 2.5V / 3.3V | 1.8V / 2.5V / 3.3V | 1.8V / 2.5V / 3.3V | 1.8V / 2.5V / 3.3V | 1.8V / 2.5V / 3.3V | 1.8V / 2.5V / 3.3V | 1.8V / 2.5V / 3.3V |
| Packaging Form | Tray | Tape & Reel | Tape & Reel | Tape & Reel | Tray | Tray | Tray |
主な差別化要因
- Largest flash within 16 KB 64-QFN tier （vs ATSAMD20J14A-MUT)
- Drop-in upgrade path for growing firmware （vs ATSAMD20J15A-MU)
- Order-of-magnitude larger memory headroom （vs ATSAMD20J18A-MU)
- Smaller footprint alternative within family （vs ATSAMD20G14A-MU)
設計ノート
The ATSAMD20J14A-MU supports 1.8V to 3.3V operation. Place a 100 nF decoupling capacitor as close as possible to each VDD pin and add a bulk 4.7 uF ceramic on the main supply. For battery applications, leverage the SAM D20 sleep modes (STANDBY, BACKUP) plus the event system to keep active current low. The regulator's input voltage should be designed with a 200 mV margin to handle transient load steps during peripheral switching.
The 64-QFN package features an exposed thermal pad that must be soldered to a ground copper pour with a via-stitching pattern for thermal dissipation. While the SAM D20 is a low-power MCU, thermal performance still matters at 48 MHz operation with all peripherals active. A ground pour of at least 100 mm^2 around the EP is recommended for production reliability, and via stitching at 0.5 mm pitch helps spread heat to internal copper layers.
Route the SWD interface (SWDIO, SWDCLK, NRST) with short traces and avoid crossing them with high-frequency switching signals. Place the 32.768 kHz crystal within 5 mm of the XIN32/XOUT32 pins with a guarded ground island to reduce noise coupling into the RTC. The 64-QFN 9x9 mm land pattern is non-standard pitch; use Microchip's recommended footprint from the datasheet, not a generic QFN64 land pattern. SAM D20 reference designs in Atmel Studio provide known-good layout templates.
Common pitfalls include omitting the exposed pad solder connection (causing thermal failure under load), using a wrong bootloader configuration that locks the device, and violating the absolute maximum voltage of 3.8V on any VDDIN pin. Avoid mixing SERCOM peripheral mappings with port pin assignments without re-running Atmel START/MPLAB Harmony code generation. When migrating from a smaller D20 variant, verify that interrupt vectors and linker sections accommodate the larger Flash on J15A/J17A/J18A parts.
コンプライアンス情報
RoHS and REACH compliant per Microchip product page. Industrial -40C to +85C temperature grade; no AEC-Q100 automotive variant in the J14A family.
