マイクロコントローラ

PIC32MZ2064DAA176T-I/2J

PIC32MZ2064DAA176T-I/2J - 200MHz 32-Bit MCU 2MB | Microchip

The Microchip Technology PIC32MZ2064DAA176T-I/2J is a 32-bit MIPS32 microAptiv PIC32MZ DA series microcontroller running at 200 MHz with 2 MB of Flash and 640 KB of SRAM, housed in a 176-pin LQFP (20x20 mm) package. It integrates a graphics controller and graphics processor for embedded GUI designs, plus a 12-bit 18 MSPS ADC module with up to 45 analog inputs. A microcontroller (MCU) is a self-contained integrated circuit that combines a processor core, memory, and programmable peripherals on a single die, forming the lowest tier of the embedded computing hierarchy: MCU -> embedded processor -> system-on-chip -> semiconductor. The PIC32MZ DA family sits at the high-performance end of this hierarchy, delivering MPU-like throughput (330 DMIPS) while retaining the deterministic interrupt behavior and ease of design of an MCU. Key differentiators include dual-panel Flash for live update support, a Memory Management Unit (MMU) for optimum embedded OS execution, microMIPS mode for up to 35% code size reduction, and an integrated DDR2 DRAM controller supporting 32 MB or 128 MB externally addressable memory. Six 4-wire SPI modules (up to 50 MHz), an SQI module configurable as an additional SPI (up to 80 MHz), five I2C modules (up to 1 Mbaud) with SMBus support, CAN, and High-Speed USB round out the connectivity set. The device is built on Microchip's PIC32MZ architecture with a 1.8 V core and flexible I/O voltage domains, enabling direct interfacing to both 1.8 V and 3.3 V peripherals. The 12-bit ADC at 18 MSPS supports simultaneous sampling for motor control and power monitoring, while the graphics pipeline offloads pixel composition from the CPU. Typical applications include industrial HMI panels, medical instrumentation displays, automotive cluster graphics, IoT gateways with local visualization, and test-and-measurement front panels. The 176-LQFP exposed-pad package provides good thermal performance for sustained 200 MHz operation. When designing with this device, pay close attention to the DDR2 memory routing and the analog supply filtering for the ADC. Microchip recommends using the PIC32MZ2064DAK176 for new designs, so verify lifecycle status before committing to volume production. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a single reference for selection and second-sourcing decisions.

USD $13.10 在庫あり

PIC32MZ2064DAA288-I/4J

PIC32MZ2064DAA288-I/4J - 200MHz 32-bit MCU w/ GPU | Microchip

The Microchip PIC32MZ2064DAA288-I/4J is a high-performance MIPS32 microAptiv 32-bit microcontroller operating at 200 MHz with an integrated 2D Graphics Processing Unit (GPU), 2 MB of Flash, and 640 KB of SRAM, housed in a 288-pin LFBGA (15x15 mm) package. It features an external DDR2 DRAM controller supporting up to 128 MB of addressable memory, a 12-bit ADC, and up to 120 GPIO pins for high-density embedded GUI designs. An MCU (Microcontroller Unit) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O on one die. The PIC32MZ DA family specifically targets embedded graphics by combining MCU-level simplicity with MPU-like performance, eliminating the need for an external host processor in display-driven applications such as industrial HMIs, medical GUI panels, and automotive instrument clusters. Key features include the MIPS32 microAptiv core with 200 MHz operation, 2 MB on-chip Flash with live update support, 640 KB SRAM, hardware crypto accelerator, dual USB 2.0 Hi-Speed with PHY, 10/100 Ethernet MAC, CAN 2.0B, and a 2D graphics controller with dedicated GPU. The DDR2 interface allows up to 32 MB internal plus 128 MB external addressable memory, far exceeding typical MCU SRAM budgets. Architecturally, the device integrates a separate graphics pipeline (GFX controller + GPU + DDR2 Phy) alongside the main CPU, enabling GUI rendering without burdening the application core. The MIPI DSI and parallel display interfaces support TFT panels up to WXGA resolution. Typical applications include industrial human-machine interface (HMI) touch panels, medical patient monitors, smart appliance control screens, point-of-sale terminals, and automotive infotainment displays. When selecting this part, verify that the 288-LFBGA package is compatible with your PCB assembly process (BGA requires X-ray inspection and precise reflow profiling), and confirm adequate thermal vias under the exposed pad for 200 MHz operation. This page combines distributor pricing, drop-in alternatives, and practical design guidance unavailable in the standalone datasheet.

USD $7.99 在庫あり

PIC32MZ2064DAA288T-I/4J

PIC32MZ2064DAA288T-I/4J - 200MHz 32-Bit MCU 2MB Flash LFBGA-288 | Microchip

The Microchip Technology PIC32MZ2064DAA288T-I/4J is a 32-bit MIPS32 microAptiv PIC32MZ DA graphics microcontroller delivering up to 200 MHz core performance, 2 MB (2M x 8) of on-chip Flash, and 640 KB of SRAM, housed in a 288-pin LFBGA (15x15 mm) package. It targets MPU-class graphics workloads while preserving MCU ease-of-design, with on-chip DDR2 DRAM controller supporting 32 MB or 128 MB of external DDR2 memory. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (Flash for code, SRAM for data), and peripherals into one package. The PIC32MZ DA family extends the MCU concept into the graphics segment, integrating a graphics controller, a graphics processor (GPU), a 12-bit 18 MSPS ADC with up to 45 analog inputs, CAN, and Hi-Speed USB - collapsing what would traditionally be an MPU-plus-discrete-GPU system into a single BGA package. Within the broader taxonomy, this device sits as: microcontroller -> 32-bit MCU -> MIPS MCU -> graphics MCU -> PIC32MZ DA series -> PIC32MZ2064DAA288 sub-family. Key differentiating features include the hardware 2D graphics engine, the integrated DDR2 controller (a rarity on MCUs), the 18 MSPS 12-bit ADC capable of up to 45 analog inputs, dual CAN controllers, Hi-Speed USB 2.0 with on-chip PHY, and 200 MHz / 252 MIPS core throughput. The 288-LFBGA package provides abundant I/O for large parallel TFTs and external memory buses. Architecturally, the part is built on the MIPS32 microAptiv core with DSP extensions, paired with dedicated graphics peripherals and a DDR2 memory controller - a unique combination for an MCU. The 2 MB Flash supports large graphics assets, while the 640 KB SRAM reduces the need for external framebuffers in moderate-sized HMI designs. Typical applications include industrial HMI panels, automotive instrument clusters, medical patient-interface displays, IoT gateways with rich UIs, and any embedded product requiring TFT graphics without an external MPU. The wide peripheral mix (CAN, USB, ADC) also supports motor-control and motor-drive HMIs. When designing with this device, allocate ample PCB layers (typically 6+) for LFBGA fan-out, follow Microchip's DDR2 layout guidelines for signal integrity, and validate graphics BGA thermal dissipation under sustained LCD backlight load. Boot-time optimization is critical for HMI responsiveness. This page synthesizes XAIPART distributor pricing, Microchip same-family drop-in alternatives, and practical BGA-layout design notes not typically covered in the manufacturer datasheet front matter.

USD $8.35 在庫あり

PIC32MZ2064DAB169-I/HF

PIC32MZ2064DAB169-I/HF - 32-bit 200MHz PIC32MZ DA MCU 169-LFBGA | Microchip

The Microchip Technology PIC32MZ2064DAB169-I/HF is a 32-bit MIPS32 microAptiv PIC microcontroller from the PIC32MZ Graphics (DA) family, delivering 200 MHz / 330 DMIPS performance with 2 MB Flash and 640 KB SRAM, housed in a 169-pin LFBGA (11x11 mm) package. It features dual-panel Flash for live update support, a 12-bit 18 MSPS 45-channel ADC, and a Memory Management Unit for OS-grade embedded execution. A PIC microcontroller (MCU) is a single-chip computer that integrates a CPU core, Flash program memory, SRAM data memory, and a rich peripheral set on a single CMOS die. The PIC32MZ DA family extends traditional MCU simplicity toward MPU-like performance: the MIPS32 microAptiv core executes 32-bit instructions, microMIPS compressed code (up to 35% smaller), and DSP extensions, all behind an MMU. This hierarchy is what allows PIC32 to render as a microcontroller (MCU) -> 32-bit MCU -> MIPS-based MCU -> application-processor class MCU -> embedded SoC, bridging the gap between classic 8-bit PIC microcontrollers and full MPUs. Key features include 200 MHz CPU with 16 KB I-cache and 4 KB D-cache, 2 MB dual-panel Flash supporting live firmware updates without downtime, 640 KB SRAM with optional 32 MB or 128 MB external DDR2 expansion, an integrated 12-bit 18 MSPS 45-channel ADC, multiple CAN, USB, and Ethernet peripherals, and a graphics LCD controller optimized for GUI applications. The 169-LFBGA package exposes the full peripheral set, including up to 8 UARTs, multiple I2C/SPI, and parallel buses. Architecturally, the PIC32MZ2064DAB169 uses a superscalar microAptiv core with hardware multiply/divide, single-cycle MAC, and a tightly-coupled prefetch buffer; dual-panel Flash effectively doubles the Flash addressable space by alternating active/update panels, which is critical for safety and OTA scenarios. The integrated MMU and 640 KB SRAM make it suitable for embedded Linux-class workloads and high-bandwidth GUI rendering. Typical applications include industrial HMI/GUI displays, multi-protocol industrial automation controllers, automotive infotainment clusters, smart energy meter gateways, and high-end medical patient-monitoring displays. The wide peripheral mix (CAN + USB + Ethernet + LCD) consolidates what would otherwise be a 2-chip design into one MCU. Designers should plan for an external 1.8 V core regulator and a 3.3 V I/O rail; the DDR2 interface (when used) requires controlled-impedance PCB traces and matched-length routing. Live-update firmware design should leverage the dual-panel Flash feature, but designers should plan to switch to the PIC32MZ2064DAL169 for new designs as the B169 variant is being phased toward the lower-cost L169 successor. This page consolidates real-time distributor stock, web datasheets, drop-in alternatives, and engineering design notes that go beyond what is printed in the Microchip datasheet alone, including a same-package drop-in cross-reference and pinout diagram.

USD $19.95 在庫あり

PIC32MZ2064DAB176T-I/2J

PIC32MZ2064DAB176T-I/2J - 200MHz 32-Bit MCU, 2MB Flash, 176-LQFP | Microchip

The Microchip Technology PIC32MZ2064DAB176T-I/2J is a 32-bit MIPS microAptiv-based PIC32MZ DA microcontroller operating at up to 200 MHz with 2 MB of Flash and 640 KB of SRAM, housed in a 176-pin LQFP (20x20 mm) package. It integrates an integrated Graphics Controller and Graphics Processor, a 12-bit 18 MSPS ADC with up to 45 analog inputs, HS USB, and on-chip/external DDR2 DRAM addressing up to 128 MB. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a high-performance processor core, program and data memory, and a rich set of peripherals (ADC, timers, communication interfaces, GPIO) into one package. Within the semiconductor hierarchy it sits at: 32-bit MCU -> microcontroller -> embedded processor -> integrated circuit -> semiconductor. The PIC32MZ DA family in particular targets GUI and HMI applications by combining MPU-class compute with MCU-level integration and on-chip graphics hardware. Key features include MIPS32 microAptiv core, 2 MB Flash (2M x 8), 640 KB SRAM, integrated LCD/GPU blocks, 12-bit 18 MSPS ADC with up to 45 analog inputs, HS USB 2.0, CAN, and DDR2 DRAM controller supporting up to 32 MB on-chip or 128 MB external address space. The 176-LQFP (20x20 mm) package gives 156 GPIO-capable pins for driving parallel-display and mixed-signal designs. Architecture-wise, the part uses the microAptiv pipeline with DSP and FPU extensions, plus a dedicated graphics block that offloads pixel rendering from the CPU. The 18 MSPS 12-bit ADC can sample 45 channels concurrently, and the DDR2 controller offloads framebuffer memory from internal RAM, enabling QVGA/WQVGA TFT panels without external SDRAM components in many designs. Typical applications include industrial HMI bridges, TFT-LV graphics, multi-channel industrial control with CAN, high-resolution HMI bridges, automotive instrument cluster, and TFT LCD driver interfaces. Its 40 MB Flash footprint leaves headroom for full graphics stacks (UGUI, emWin, Microchip MPLAB Harmony) plus wireless protocols. When designing with this part, plan DDR2 trace length matching (within 25 mils) and decoupling. The Graphics Processor reduces CPU load but the framebuffer still requires careful DMA bandwidth budgeting on the host bus. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $9.45 在庫あり

PIC32MZ2064DAB288-I/4J

PIC32MZ2064DAB288-I/4J - 200MHz 32-Bit MCU, 2MB Flash, LFBGA-288 | Microchip

The Microchip PIC32MZ2064DAB288-I/4J is a high-performance 32-bit MIPS32 microAptiv microcontroller operating up to 200 MHz, integrating 2 MB Flash and 640 KB SRAM in a 288-ball LFBGA (15x15 mm) package. It is part of the PIC32MZ DA graphics family and is engineered for MPU-class graphical user interface (GUI) applications with on-chip DDR2 DRAM controller, integrated Graphics Controller, and dedicated Graphics Processor. A microcontroller (MCU) is a single integrated semiconductor device that combines a processor, memory (Flash and SRAM), and programmable I/O peripherals on one die. The PIC32MZ DA family occupies the high-performance tier of 32-bit MCUs, above Cortex-M4 class devices and approaching application processor territory, specifically by embedding a Graphics Processing Unit (GPU) and external DRAM interface that are normally only found on application processors. Key features of the PIC32MZ2064DAB288-I/4J include: 2 MB on-chip program Flash (2M x 8), 640 KB SRAM, integrated DDR2 DRAM controller supporting up to 32 MB or 128 MB external addressable DDR2, hardware Graphics Controller with GPU for accelerated display rendering, a 12-bit 18 MSPS ADC module with up to 45 analog inputs, Hi-Speed USB 2.0 with integrated PHY, two CAN 2.0b modules, up to 120 general-purpose I/O pins, an operating voltage range of 1.7 V to 3.6 V, and an industrial operating temperature grade of -40 C to +85 C. The MIPS32 microAptiv core uses a 5-stage pipeline with DSP extensions and a single-cycle MAC unit, delivering 1.79 DMIPS / MHz or roughly 362 DMIPS at 200 MHz. The integrated Graphics Controller supports TFT LCD panels with parallel RGB, and the Graphics Processor offloads rendering of fonts, sprites, alpha blending, color conversion, and JPEG decode so the CPU is free for application logic. The DDR2 DRAM controller (16-bit interface, up to 200 MHz) provides the large framebuffer bandwidth demanded by QVGA and VGA-class displays. Typical applications include graphical human-machine interface (HMI) panels for industrial automation, medical patient monitors with color TFT LCD, automotive infotainment displays, point-of-sale terminals, smart-home control panels, and any embedded GUI with animated icons, alpha blending, or large frame buffers. The combination of on-chip 2 MB Flash, 640 KB SRAM, and DDR2 expansion gives designers headroom for full graphical stacks (e.g. emWin, Microchip Graphics Library) plus application code. Designers should route DDR2 traces as 50 ohm microstrip with matched length within 0.10 inch, place 0.1 uF + 10 uF decoupling on every VDD/VBAT pin, and provide four-layer PCB with a stitched ground plane beneath the LFBGA. The LFBGA-288 requires via-in-pad or via-near-pad PCB technology and X-ray inspection on production boards. This page synthesizes distributor pricing across DigiKey, LCSC, JLCPCB and Microchip Direct, pin-compatible same-footprint LFBGA-288 alternatives, and practical PCB design notes not found in the manufacturer datasheet alone.

USD $9.20 在庫あり

PIC32MZ2064DAB288T-I/4J

PIC32MZ2064DAB288T-I/4J - 200MHz 32-bit MCU 2MB Flash | Microchip

The Microchip PIC32MZ2064DAB288T-I/4J is a high-performance 32-bit MIPS32 microAptiv PIC microcontroller from the PIC32MZ DA family, operating at 200 MHz with 2 MB of Flash and 640 KB of SRAM, housed in a 288-pin LFBGA (15x15 mm) package. It is engineered for embedded applications where MPU-class throughput is required but MCU-grade simplicity is preferred, delivering up to 200 MHz single-core MIPS performance with integrated DDR2 DRAM controller, Graphics Controller and Graphics Processor, and a 12-bit 18 MSPS ADC with up to 45 analog inputs. A PIC microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals onto one die; the PIC32MZ DA family specifically extends this concept toward GUI and human-machine-interface workloads by adding a graphics pipeline, external DDR2 memory interface, and high-throughput analog/digital conversion. Within the broader hierarchy, this part sits as a microcontroller -> embedded controller -> 32-bit MCU -> MIPS-based MCU -> PIC32MZ DA series -> DAB288 sub-family with 2 MB Flash. Key features include a 32-bit MIPS32 core at 200 MHz, 2 MB Flash program memory, 640 KB SRAM, support for up to 32 MB or 128 MB external DDR2 DRAM, an integrated Graphics Controller and Graphics Processor, a 12-bit 18 MSPS ADC with up to 45 analog channels, plus CAN and High-Speed USB peripherals. The on-chip FPU and DSP extensions enable signal-processing workloads, while the DDR2 interface removes the need for an external memory controller companion chip in mid-density designs. The BGA package maximizes peripheral pin-out (288 balls) for designs that require extensive GPIO, parallel display buses, and multiple serial interfaces at full quota. Typical applications of the PIC32MZ DA family include industrial-grade HMI panels, automotive infotainment displays, medical patient-interface screens, point-of-sale camera, IoT gateways with LCD display, and audio player. The integrated graphics controller eliminates an external GPU in many cost-sensitive GUI designs, while the high-throughput ADC simplifies mixed-signal data acquisition. When designing with this device, allocate careful attention to BGA fan-out routing and thermal management - the LFBGA package benefits from at least 4 PCB layers and a ground flood under the device to spread heat. The DDR2 controller needs matched-length routing and reference-VPC decoupling; Microchip's MPLAB Harmony graphics project framework is recommended for board-level bring-up.

USD $7.95 在庫あり

PIC32MZ2064DAG169-I/6J

PIC32MZ2064DAG169-I/6J - 200MHz 32-Bit Graphics MCU, 2MB Flash | Microchip

The Microchip Technology PIC32MZ2064DAG169-I/6J is a high-performance 32-bit MIPS32 microAptiv microcontroller operating at up to 200 MHz (330 DMIPS), integrating 2 MB of Flash program memory, 640 KB of SRAM, and an integrated Graphics Controller with on-chip DDR2 DRAM support (32 MB or 128 MB options) for advanced GUI and HMI designs. Housed in a 169-ball LFBGA (11x11 mm) package, this PIC32MZ DA family member combines MPU-class compute with MCU simplicity, targeting industrial control, automotive dashboards, medical graphical interfaces, and IoT edge gateways that demand rich graphics and fast deterministic response. A 32-bit MCU is a microcontroller whose CPU datapath, registers, and ALU are 32 bits wide, enabling it to execute large data payloads, complex control loops, and graphical workloads that exceed the throughput of 8-bit or 16-bit devices. Within the Microchip PIC32 family hierarchy, the PIC32MZ DA Graphics sub-family sits above the PIC32MX family (basic connectivity) and below the PIC64 family, occupying the high-end graphics tier. The DA sub-family in particular adds an integrated graphics LCD controller and stacked DDR2 DRAM, eliminating the need for an external memory controller on most HMI boards. Key features include a 12-bit, 18 MSPS, 45-channel ADC module for high-speed mixed-signal acquisition, a Memory Management Unit for embedded RTOS execution, dual-panel Flash for live firmware update with zero downtime, and Hardware Cryptography accelerators supporting AES, SHA, and RNG. Communication peripherals cover USB 2.0 High-Speed with PHY, CAN 2.0B, Ethernet MAC, six UART/I2C/SPI controllers, plus a 16-bit Parallel Master Port for external displays. Architecturally the device combines a superscalar MIPS32 microAptiv core with dedicated 2D graphics engine, DDR2 PHY, and Crypto engine on a single die, allowing the MCU to drive WXGA-resolution TFT panels while maintaining 100+ MHz CPU headroom for application code. The 11x11 mm BGA footprint supports routing for both SDRAM and RGB/LVDS display signals, critical for compact HMI boards. Typical applications include industrial HMI panels, smart-home control hubs, medical patient monitoring displays, automotive infotainment clusters, graphical IoT edge nodes, and point-of-sale terminals. When designing with this part, ensure the four DDR2 power rails (VDD, VDDQ, VPP, VREF) are decoupled per the reference design; use the Hardware Crypto engine only when the RTOS scheduler is configured to isolate cryptographic tasks from display refresh to prevent graphical jitter. This page synthesizes distributor pricing (DigiKey, Mouser, Arrow, Octopart as of 2026-10-09), drop-in alternative MPNs, and pin-compatibility notes not consolidated on any single manufacturer page.

USD $12.95 在庫あり

PIC32MZ2064DAG169T-I/6J

PIC32MZ2064DAG169T-I/6J - 200MHz MCU 2MB Flash LFBGA-169 | Microchip

The Microchip Technology PIC32MZ2064DAG169T-I/6J is a high-performance 32-bit microcontroller from the PIC32MZ Graphics (DA) family, built on the MIPS32 microAptiv core running at 200 MHz and delivering 330 DMIPS of processing throughput. It integrates 2 MB of Flash and 640 KB of SRAM, packages the GPU-friendly graphics peripherals, and stacks an external 32 MB or 128 MB addressable DDR2 memory die in the same 169-ball LFBGA (11x11) package to feed high-resolution displays. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, and programmable peripherals on one die; the PIC32MZ DA family occupies the upper end of the MCU spectrum, often competing with entry-level MPUs for graphics workloads. Within the broader hierarchy it sits as: PIC32MZU -> 32-bit MCU -> microcontroller -> embedded processor -> semiconductor IC, and it is one of Microchip's premier choices for human-machine-interface applications. Key features include dual-panel Flash for live firmware update support, a 12-bit 18 MSPS 45-channel ADC, a dedicated Memory Management Unit for embedded OS execution, a 2-D channel for display pipeline acceleration, and a crypto engine (RNG/AES/SHA) on selected variants. The device supports parallel RGB/memory interfaces for direct LCD connection and includes Hi-Speed USB, Ethernet, CAN-FD, and multiple SPI/I2C/UART instances for system connectivity. The architecture pairs the MIPS32 microAptiv core with a tightly-coupled LCD DMA path, allowing full-screen GUI rendering at WXGA resolution without CPU bottleneck. Internal stacked DDR2 eliminates the need for an external SDRAM chip on the PCB, reducing BOM cost and EMI. Typical applications include industrial HMI panels, automotive dashboards, home appliance color touch interfaces, medical patient monitors, point-of-sale terminals, and any GUI-rich embedded product where the BOM stack must remain compact. When designing with this part, allocate PCB ground return paths under the BGA, follow Microchip's DDR2 layout checklist, and confirm thermal budget using the package's junction-to-ambient resistance. This page synthesizes distributor pricing, drop-in alternatives, application notes, and design trade-offs not found in the manufacturer datasheet alone, giving engineers and procurement teams a faster path from spec to order.

見積もり在庫あり

PIC32MZ2064DAG176-I/2J

PIC32MZ2064DAG176-I/2J - 200MHz 32-Bit MCU, 2MB Flash, 176-LQFP | Microchip

The Microchip Technology PIC32MZ2064DAG176-I/2J is a high-performance 32-bit MIPS microcontroller from the PIC32MZ Graphics (DA) family, featuring the MIPS32 microAptiv core running at 200 MHz with up to 330 DMIPS of computational throughput. It integrates 2 MB of dual-panel Flash memory and 640 KB of SRAM in a 176-pin LQFP (20x20 mm) package with exposed thermal pad, enabling GUI-rich embedded designs with MPU-class performance. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals on one die. PIC32MZ DA devices sit in the high-performance tier of the PIC32 family, alongside the EF (Ethernet) and EC (connectivity) sub-families, and are designed for applications that require large memory footprints, real-time graphics, and connectivity stacks. The DA series specifically adds an integrated Graphics LCD controller and a DDR2 external memory interface that can address 32 MB or 128 MB of external DDR2, distinguishing it from EF/EC variants that lack a GPU. Key specifications include 2 MB (2M x 8) of Flash supporting live update via dual-panel architecture, 640 KB of SRAM, an integrated 12-bit 18 MSPS 45-channel ADC, USB-HS, Ethernet MAC, SD card host, CAN, and a 2D Graphics Processing Unit (GPU) for accelerating GUI rendering. The wide memory map and Memory Management Unit (MMU) support embedded operating systems such as FreeRTOS, OpenRTOS, and Micrium OS, while microMIPS compressed mode reduces code size by up to 35% compared to standard MIPS32 instruction encoding. Architecturally, the PIC32MZ2064DAG176-I/2J uses a superscalar microAptiv core with hardware multiply/divide and a tightly-coupled peripheral bridge. The dual-panel Flash subsystem allows a firmware image to run from one panel while the other is being reprogrammed, enabling field firmware updates without downtime. The integrated GPU and LCD controller support resolutions up to WVGA with hardware-accelerated rendering, offloading pixel-pushing from the CPU. Typical applications include industrial HMI panels, automotive instrument clusters, medical patient monitors, point-of-sale terminals, smart home control panels, and graphical IoT gateways. The wide 1.8 V core / 3.3 V I/O supply and 176-pin LQFP footprint simplify PCB layout for designs that previously required a discrete MPU plus external SDRAM. When designing with this part, ensure the DDR2 interface is impedance-controlled and length-matched per JEDEC specifications; place a 1.8 V LDO close to the core supply pins and bulk-decouple every power rail. Microchip recommends considering the pin-compatible PIC32MZ2064DAR176 variant for new designs where extended commercial availability is required. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes that go beyond what the manufacturer datasheet provides, helping engineers and procurement teams make informed decisions.

USD $26.10 在庫あり

PIC32MZ2064DAG176T-I/2J

PIC32MZ2064DAG176T-I/2J - 200MHz 32-bit MCU 2MB Flash | Microchip

The Microchip Technology PIC32MZ2064DAG176T-I/2J is a high-performance 32-bit microcontroller from the PIC32MZ DA family, based on the MIPS32 microAptiv core running up to 200 MHz, integrating 2 MB of Flash and 640 KB of SRAM in a 176-pin LQFP (20x20 mm) package with exposed pad. It is engineered for human-machine interface (HMI) and graphical applications, combining MPU-class compute density with MCU-class integration. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and a rich set of peripherals (UART, SPI, I2C, ADC, timers, GPIO). It sits within the hierarchy CPU -> microprocessor -> microcontroller -> embedded computing -> semiconductor. The PIC32MZ DA family further extends this with on-chip graphics controllers (GPU-less LCD controller + 2D drawing engine), external DDR2 memory addressing up to 128 MB, and 10/100 Ethernet MAC - enabling advanced GUI designs without external graphics co-processors. Key differentiating features include the 200 MHz MIPS32 microAptiv core delivering up to 330 DMIPS / 1.65 DMIPS per MHz, dedicated graphics peripherals including a 2D Graphics Processing Unit (GPU) and Parallel Master Port (PMP) for direct LCD drive, on-chip 32 MB DDR2-ready address space, dual USB 2.0 high-speed OTG controllers, and integrated 10/100 Ethernet MAC with MII/RMII interfaces. The 176-pin LQFP package exposes up to 120 GPIO and supports operating voltages of 1.8 V core / 3.3 V I/O with industrial -40C to +85C temperature range. Typical applications include industrial HMI panels, graphical touch-screen controllers, medical user-interface boards, building-automation control panels, multi-protocol IoT gateways, and graphics-rich embedded control products. The combination of large memory, high-speed connectivity, and on-chip graphics makes it a drop-in MCU for products that previously required a separate MPU plus discrete LCD controller. When designing with this part, pay attention to the decoupling network (1 uF + 100 nF + 10 nF bulk) near the exposed thermal pad, layout of the DDR2 interface for signal integrity, and the JTAG trace length for reliable programming/debugging. The -I/2J suffix indicates industrial temperature grade and 176-pin LQFP tape-and-reel packaging. This page synthesizes real distributor pricing, verified drop-in alternatives from Microchip's 32MZ DA family, and practical design notes not collected in any single source - giving engineers a single consolidated reference for sourcing PIC32MZ2064DAG176T-I/2J.

USD $22.05 在庫あり

PIC32MZ2064DAH169-I/6J

PIC32MZ2064DAH169-I/6J - 200MHz 32-bit MCU, 2MB Flash, 169-LFBGA

The Microchip Technology PIC32MZ2064DAH169-I/6J is a high-performance 32-bit microcontroller from the PIC32MZ Graphics (DA) family, built around the MIPS32 microAptiv core running at 200 MHz (330 DMIPS) and housed in a 169-ball LFBGA (11x11 mm) package. It integrates 2 MB Flash, 640 KB SRAM, and on-chip DDR2 controller supporting 32 MB or 128 MB externally addressable DDR2, providing MPU-class memory bandwidth for graphics workloads. Key features include a 12-bit, 18 MSPS, 45-channel ADC module with analog comparators and a high-speed USB 2.0 high-speed PHY, along with dual panel Flash for live update support and a memory management unit (MMU) for embedded OS execution. The microMIPS mode yields up to 35% smaller code footprint, and integrated graphics peripherals (GPU, display controller, DDR2 interface) simplify HMI design. The architecture combines a 5-stage pipeline MIPS32 core with dedicated 2D graphics engine and TFT/panel interface hardware, enabling smooth GUI rendering without external graphics controllers. DDR2 memory support via the integrated controller removes the need for external SDRAM chips, reducing BOM and board area while delivering sufficient bandwidth for full-HD framebuffer manipulation. Typical applications include industrial HMI panels, automotive dashboards, medical patient monitors, smart-home control displays, and embedded GUI products. The combination of microAptiv performance, 2 MB Flash, 640 KB SRAM and integrated DDR2 enables 32-bit OS execution (FreeRTOS, embOS, MPLAB Harmony) plus rich graphical interfaces. When designing with this MCU, use MPLAB X IDE and MPLAB Harmony framework for driver and middleware integration. The LFBGA package requires X-ray inspection and 4-layer PCB minimum; ensure thermal vias under the exposed pad and verify impedance-controlled traces for DDR2 signal integrity. This page synthesizes distributor pricing, drop-in alternatives, application notes, and practical design considerations not found in the manufacturer datasheet alone.

USD $12.60 在庫あり

PIC32MZ2064DAH176-I/2J

PIC32MZ2064DAH176-I/2J - 200MHz MCU, 2MB Flash, GPU, DDR2 | Microchip

The Microchip Technology PIC32MZ2064DAH176-I/2J is a high-performance 32-bit microcontroller from the PIC32MZ Graphics (DA) family, featuring a MIPS32 microAptiv core running at 200 MHz with 330 DMIPS, integrated 2D graphics processing unit (GPU), and DDR2 memory controller in a 176-pin LQFP (20x20 mm) package. It integrates 2 MB Flash (Dual Panel for live update support), 640 KB SRAM, and an on-chip DDR2 SDRAM controller addressing up to 128 MB externally. The -I suffix indicates the industrial temperature grade, and the /2J suffix indicates tray packaging. A microcontroller (MCU) is a single-chip computer containing a processor core, program memory, data memory, and peripherals. The PIC32MZ DA family targets the unique niche of GUI and graphics applications with MCU simplicity, providing MPU-like performance while retaining the deterministic interrupt response and ease-of-use expected of a microcontroller. Within the broader taxonomy, this device sits as: 32-bit MCU -> MIPS-based MCU -> PIC32 family -> PIC32MZ DA series -> graphics-enabled MCU -> embedded system component. Key features include a 12-bit, 18 MSPS, 45-channel ADC module, hardware crypto engine, USB-HS, Ethernet, SD card, CAN, GPU, and XLP (eXtreme Low Power) technology. The MMU (Memory Management Unit) supports optimum embedded OS execution (Linux/RTOS), and microMIPS mode reduces code size by up to 35%. Per the Microchip product page, Microchip recommends considering the PIC32MZ2064DAS176 for new designs, suggesting the DAH176 is being maintained for existing designs. Typical applications include human-machine interface (HMI) and industrial display controllers, point-of-sale (POS) terminals, home appliance control panels, medical patient monitors, and automotive infotainment graphic subsystems. The integrated GPU offloads 2D drawing operations from the CPU, freeing cycles for application logic, and the DDR2 controller eliminates external SDRAM glue logic. Designers must provision adequate PCB area beneath the LQFP for thermal dissipation, follow the Microchip DDR2 routing guidelines for the SI-length group, and ensure decoupling per the manufacturer's reference design. The /2J suffix denotes tray packaging, so for high-volume automated assembly, consider the /T (tape and reel) variant instead. This page synthesizes distributor pricing, drop-in compatible alternatives, and practical design notes not aggregated in a single manufacturer datasheet.

USD $11.30 在庫あり

PIC32MZ2064DAH176T-I/2J

PIC32MZ2064DAH176T-I/2J - 200MHz 32-bit MCU 2MB Flash | Microchip

The Microchip Technology PIC32MZ2064DAH176T-I/2J is a 32-bit MIPS32 microAptiv PIC32MZ DA graphics microcontroller IC running at 200 MHz, equipped with 2 MB (2M x 8) of Flash and 640 KB of SRAM, and housed in a 176-pin LQFP (20x20) package with an exposed thermal pad. The part integrates a 12-bit 18 MSPS ADC, a hardware Crypto engine, a Graphics Processing Unit (GPU), High-Speed USB, Ethernet, CAN, and an external DDR2 DRAM controller capable of addressing up to 128 MB externally. An LQFP-176 (Low-profile Quad Flat Package) microcontroller is a surface-mount IC package with 176 gull-wing leads on a 20 mm x 20 mm body and an exposed pad for thermal dissipation; it sits inside the broader LQFP package family -> QFP family -> surface-mount IC packaging hierarchy. PIC32MZ DA-series devices are positioned between conventional MCUs and MPUs, providing MPU-like graphics performance while retaining the deterministic peripheral set of a microcontroller. Key features of the PIC32MZ2064DAH176T-I/2J include a single-core MIPS32 microAptiv core with FPU, hardware crypto acceleration, an integrated LCD controller, up to 45 analog inputs for the 12-bit ADC, an HS USB 2.0 PHY on-chip, and a DDR2 DRAM controller that supports 32 MB or 128 MB external memories. The device supports an operating voltage of 2.2V to 3.6V, industrial-grade temperature range of -40C to +85C, and 200 MHz operation with hardware FPU and DSP extensions. The PIC32MZ DA architecture pairs a high-throughput MIPS32 core with a dedicated graphics pipeline, allowing up to WQVGA or higher resolutions to be rendered without taxing the application CPU. DDR2 memory support up to 128 MB enables frame buffer expansion for rich graphical user interfaces, and the integrated crypto engine supports AES, DES, 3DES, SHA, and HMAC acceleration for secure applications. Typical applications include industrial HMI panels with resistive or capacitive touch, automotive dashboard and cluster displays, point-of-sale terminals, medical patient monitors, and home-automation controllers. The combination of HS USB, Ethernet, and CAN peripherals also suits the part for industrial-control gateway products that must bridge multiple fieldbuses. When designing with the PIC32MZ2064DAH176T-I/2J, pay close attention to DDR2 routing: the external memory bus has strict length-matching and impedance requirements, and the reference clock must be filtered. Microchip recommends using MPLAB Harmony v3 and the PIC32MZ DA BSP for peripheral stacks. This page synthesizes distributor pricing, drop-in PIC32MZ DA family alternatives, and practical design notes that complement the manufacturer datasheet without copying it.

USD $15.51 在庫あり

PIC32MZ2064DAK169-I/HF

PIC32MZ2064DAK169-I/HF - 200MHz 32-bit MCU 2MB Flash | Microchip

The Microchip Technology PIC32MZ2064DAK169-I/HF is a high-performance 32-bit MIPS microAptiv microcontroller integrating 2MB Flash, 640KB SRAM, an integrated Graphics Controller and Graphics Processor, and an on-chip externally addressable DDR2 DRAM controller (32MB or 128MB), housed in a 169-pin LFBGA (11x11 mm) package. An MCU (Microcontroller Unit) is a single-chip computer that combines a CPU core, non-volatile program memory (Flash), volatile working memory (SRAM), and a rich set of peripherals (ADC, timers, communication controllers) on one die. The PIC32MZ DA family sits in the high-performance tier of Microchip's PIC32 portfolio, delivering MPU-like throughput while keeping the ease-of-use and deterministic interrupt model of an MCU. Within the broader taxonomy, PIC32MZ DA belongs to: microcontroller -> embedded MCU -> 32-bit MCU -> MIPS-based MCU -> graphics-enabled MCU. Key features include a 200 MHz / 330 DMIPS MIPS32 microAptiv core with microMIPS mode (up to 35% smaller code), 2MB dual-panel Flash for live firmware update, a 12-bit 18 MSPS ADC with up to 45 analog inputs, a dedicated Graphics Processing Unit (GPU) and LCD controller supporting WQVGA and larger panels, HS USB 2.0, CAN, and a high-bandwidth DDR2 SDRAM interface. The integrated DDR2 controller lets designers attach up to 128MB of external SDRAM without an external memory controller, simplifying board layout for graphical HMI designs. Architecturally, the device combines the microAptiv core with a 128-bit-wide Flash bus for zero-wait-state execution at 200 MHz, a Memory Management Unit (MMU) for embedded OS support, and dedicated 2D graphics hardware that offloads rendering from the CPU. The dual-panel Flash subsystem supports live firmware updates - one panel runs application code while the other receives the new image, then a fail-safe swap boots the new firmware. Typical applications include industrial graphical HMI terminals, automotive infotainment clusters, medical patient monitors with color TFT displays, smart-home control panels, and point-of-sale terminals. The integrated graphics pipeline lets developers drive TFT LCDs up to WQVGA without an external graphics controller. When designing with the PIC32MZ2064DAK169-I/HF, allocate 4-layer PCB routing for the DDR2 interface to meet length-matching and impedance requirements, follow Microchip application note AN1338 for DDR2 layout, and provide a bulk + bypass capacitor network on every AVDD/AVSS pair used by the 18 MSPS ADC to preserve SNR. This page synthesizes distributor pricing, pin-compatible alternatives, and practical design notes not found in the manufacturer datasheet, giving procurement and design engineers a single reference for evaluating the PIC32MZ DA family.

USD $12.80 在庫あり

PIC32MZ2064DAK169-V/HF

PIC32MZ2064DAK169-V/HF - 200MHz 32-bit Graphics MCU | Microchip

The Microchip Technology PIC32MZ2064DAK169-V/HF is a high-performance 32-bit MIPS32 microAptiv PIC microcontroller designed for advanced graphical user interface (GUI) applications. It integrates 2 MB of Flash and 640 KB of SRAM on-chip, with support for 32 MB or 128 MB of external DDR2 DRAM (family-level option). The device operates at up to 200 MHz and is housed in a 169-pin LFBGA (11x11 mm) package, in the -40C to +105C industrial/automotive-grade temperature range (per the V/HF suffix). What is a PIC32MZ Graphics MCU? A PIC32MZ microcontroller is a 32-bit MIPS-based MCU family from Microchip Technology (semiconductor manufacturer) that combines MPU-class computational throughput with the deterministic peripherals and ease of use of an MCU. PIC32MZ Graphics (DAK/DAL/DAR/DAS) family parts add an integrated 2D Graphics Controller and Graphics Processing Unit (GPU), enabling rich HMI rendering on TFT LCD panels without an external graphics coprocessor. The hierarchy is: PIC32MZ -> MIPS32 microAptiv core -> 32-bit MCU -> embedded microcontroller -> integrated circuit. Key features include a 12-bit 18 MSPS ADC with up to 45 analog inputs, High-Speed USB 2.0 (HS USB) with on-chip transceiver, CAN 2.0b, plus the integrated GPU and Graphics LCD Controller. The 2 MB Flash and 640 KB SRAM satisfy the storage and framebuffer needs of advanced GUIs with assets, fonts, and animations. The 200 MHz MIPS32 microAptiv core delivers MPU-class throughput. On the architecture, the microAptiv core is single-core (no SMP), with integrated FPU, MMU, and prefetch cache. DDR2 DRAM is driven by an external memory controller, while on-die SRAM is split between general-purpose and dedicated graphics/USB buffers. The 169-LFBGA (11x11) package provides ample I/O for parallel RGB display output and quadrature encoder input. Typical applications include automotive infotainment HMIs, industrial machine control panels with color TFT, medical patient monitors, point-of-sale terminals, and home appliance HMI. The graphics acceleration and large framebuffer simplify development of icon, slider, and animation UIs without an external GPU. When designing with the PIC32MZ2064DAK169-V/HF, ensure DDR2 DRAM traces are length-matched and impedance-controlled per the Microchip schematic checklist. Provide a low-jitter 24 MHz crystal reference for USB and DDR2, and follow the package's PCB land pattern and thermal dissipation guidance. This page synthesizes distributor pricing, drop-in alternatives from the same 169-LFBGA Graphics family, and practical design notes that go beyond the manufacturer datasheet summary.

USD $9.78 在庫あり

PIC32MZ2064DAK169T-I/HF

PIC32MZ2064DAK169T-I/HF - 200MHz 32-bit MCU w/ 2MB Flash & Graphics | Microchip

The Microchip Technology PIC32MZ2064DAK169T-I/HF is a high-performance 32-bit microcontroller from the PIC32MZ Graphics (DAK) family, built on the MIPS32 microAptiv core running at 200 MHz, integrating 2 MB of Flash and 640 KB of SRAM in a 169-pin LFBGA (11x11 mm) package. The device combines MPU-class performance with MCU-class ease of design for graphical user interface (GUI) applications, pairing a 32-bit CPU with an Integrated Graphics Controller and dedicated Graphics Processor (GPU) that offloads rendering and animation workloads from the main CPU. A microcontroller (MCU) is a single-chip processor that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals including ADCs, communication interfaces, and timers. High-performance 32-bit MCUs like the PIC32MZ DA family blur the traditional boundary between MCUs and microprocessors (MPUs) by integrating external memory controllers, graphics engines, and large memory footprints on-chip, enabling compact single-chip GUI solutions without an external application processor. Key features of the PIC32MZ2064DAK169T-I/HF include on-chip support for 32 MB or 128 MB externally addressable DDR2 DRAM, an integrated 12-bit 18 MSPS ADC with up to 45 analog inputs, a High-Speed USB 2.0 interface, CAN, and a Peripheral Pin Select (PPS) system that allows flexible function remapping across I/O pins. The 5V-tolerant digital I/O with up to 32 mA source/sink, combined with selectable open-drain, pull-up, pull-down, and slew-rate control, makes it well suited to mixed-voltage industrial designs. Class B Safety Library support (IEC 60730) and AEC-Q100 Grade 1 qualification (-40C to +125C) target safety-critical and automotive-grade embedded systems. Architecture-wise, the PIC32MZ DA series uses a Harvard-style memory topology, dual IPU/DMA engines, and a hardware 2D graphics accelerator that supports alpha blending, alpha masking, color-keying, and image decompression. This makes the device a single-chip solution for HMI designs that previously required an external MPU plus a separate LCD controller. Typical applications include industrial HMI touch panels, automotive instrument clusters, medical patient monitors, smart-home control panels, point-of-sale (POS) terminals, and avionics displays. Compared to the older PIC32MX series, the DA family offers roughly 5x the CPU performance, integrated DDR2 memory support, and a much richer graphics pipeline. When designing with this device, ensure proper power-supply sequencing for the DDR2 interface (VDD, VDDR, VDDIO rails) and follow Microchip's recommended decoupling scheme. Thermal management is generally modest at industrial duty cycles, but high GUI workloads at 200 MHz require attention to the LFBGA PCB layout to maintain junction temperature within specifications. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical HMI design notes not found in the manufacturer datasheet alone.

USD $13.50 在庫あり

PIC32MZ2064DAK169T-V/HF

PIC32MZ2064DAK169T-V/HF - 200MHz 2MB Flash 32-bit MCU | Microchip

The Microchip Technology PIC32MZ2064DAK169T-V/HF is a 200 MHz MIPS32 microAptiv PIC32MZ DAK 32-bit microcontroller with 2MB program Flash and an integrated graphics controller, housed in a 169-pin LFBGA (11x11 mm) package. It delivers MPU-class performance with MCU-class design simplicity for advanced human-machine interface (HMI) and graphical applications, combining 2MB Flash, 640KB SRAM, and on-chip DDR2 DRAM controller support for up to 128 MB of external DDR2 memory. A 32-bit microcontroller (MCU) is an integrated processor that combines a CPU core, program and data memory, and a rich set of on-chip peripherals in a single IC. Within the broader taxonomy, this PIC32MZ DAK device sits under the high-performance MCU category, above general-purpose 8/16-bit MCUs and below application processors (MPUs). It belongs to the MIPS32 microAptiv family, which is positioned for connected, low-power, and graphics-rich embedded systems that demand deterministic real-time performance. Key features include a 200 MHz CPU core, integrated graphics controller with hardware graphics processor for accelerated GUI rendering, a 12-bit 18 MSPS ADC module with up to 45 analog inputs, dual CAN interfaces, Hi-Speed USB 2.0, and Peripheral Pin Select (PPS) for flexible function remapping. 5V-tolerant GPIO with up to 32 mA source/sink, Class B Safety Library support (IEC 60730), and AEC-Q100 Grade 1 qualification make it suitable for safety-critical and automotive-grade deployments. Architecturally, the device pairs the MIPS32 microAptiv core with dedicated on-chip controllers (DDR2 DRAM, Graphics, HS USB) and a 12-bit high-speed ADC pipeline. The 169-LFBGA package is required to expose the high GPIO and parallel display count needed for TFT-driven graphical HMIs. Typical applications include automotive instrument clusters and HMI panels, industrial control HMIs with TFT-LCD displays, point-of-sale (POS) terminals, and medical device graphical interfaces. The wide ADC channel count also suits multi-sensor data acquisition front-ends. When designing with this part, allocate adequate PCB area for the 11x11 mm BGA fanout and ensure DDR2 routing follows the datasheet's impedance and length-matching guidance. The Graphics Processor offloads the CPU for high-frame-rate GUIs, so prioritize the dedicated display interface pins during board layout. This page synthesizes distributor pricing across six sources, drop-in PIC32MZ DAK-family alternatives, and application-focused design notes that go beyond the manufacturer datasheet summary.

USD $9.32 在庫あり

PIC32MZ2064DAK176-I/2J

PIC32MZ2064DAK176-I/2J - 200MHz 32-bit MCU, 2MB Flash, 176-LQFP

The Microchip PIC32MZ2064DAK176-I/2J is a high-performance 32-bit MIPS microcontroller from the PIC32MZ Graphics (DAK/DAL/DAR/DAS) family, integrating 2MB of Flash, 640KB of SRAM, and a 200MHz MIPS32 microAptiv core in a 176-pin LQFP (20x20mm) exposed-pad package. The 'K' suffix indicates the largest Flash variant (2MB) in the DA graphics family, paired with the integrated DDR2 DRAM controller that can address up to 128MB of external DDR2 memory, eliminating the need for an external memory bus controller in graphics-rich designs. The integrated graphics controller and graphics processor deliver MPU-like performance with MCU design simplicity, enabling full GUI implementations without an external graphics chip. The PIC32MZ DA family sits within the broader taxonomy of 32-bit microcontrollers -> MIPS microAptiv architecture -> PIC32 family -> PIC32MZ Graphics sub-family. These microcontrollers target applications that previously required a microprocessor plus companion ICs, because the device integrates a 200MHz core, large SRAM, hardware graphics acceleration, and an external DDR2 controller on a single die. The Graphics Processing Unit (GPU) accelerates 2D drawing operations such as line, rectangle, and circle rendering, plus alpha-blended overlays, freeing the CPU to handle application logic. Key features include 2MB Flash program memory (2M x 8), 640KB SRAM (640K x 8), an integrated DDR2 DRAM controller supporting 32MB or 128MB externally addressable memory, a 32-bit MIPS32 microAptiv core running at 200MHz, and an integrated graphics controller with hardware-accelerated primitives. Communication peripherals include USB 2.0 High-Speed with PHY, dual CAN, Ethernet MAC, multiple UART/SPI/I2C channels, and a 12-bit ADC. The 120 I/O pins support capacitive touch sensing and parallel bus expansion. Typical applications include industrial human-machine interface (HMI) panels, point-of-sale terminals, medical patient monitors, automotive infotainment displays, and smart-home control panels with TFT LCD touchscreens. Designers benefit from MPLAB Harmony ecosystem, which provides free graphics libraries, middleware, and example projects for accelerated GUI development. When designing with this device, ensure the DDR2 memory is laid out per Microchip's routing guidelines; incorrect impedance matching or trace length mismatch will degrade DDR2 throughput. Plan power sequencing carefully: VDDIO must ramp before VDDCORE to prevent latch-up. Use the exposed thermal pad with a continuous ground plane for thermal dissipation. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $7.32 在庫あり

PIC32MZ2064DAK176-V/2J

PIC32MZ2064DAK176-V/2J - 200MHz 32-bit MCU, 2MB Flash, Graphics Controller, 176-LQFP | Microchip

The Microchip Technology PIC32MZ2064DAK176-V/2J is a 32-bit MIPS32 microAptiv PIC microcontroller from the PIC32MZ Graphics (DAK/DAL/DAR/DAS) family, delivering MPU-class performance with MCU-style integration for graphical user interface (GUI) designs. The device integrates 2MB of Flash program memory, 640KB of SRAM, and runs at a core clock speed of 200 MHz, all housed in a 176-lead LQFP (20x20 mm) surface-mount package. The "V" suffix denotes a -40C to +105C operating temperature range and the "/2J" indicates tray packaging. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, working RAM, and a rich set of peripherals. The PIC32MZ DA series sits in the hierarchy 32-bit MCU -> MIPS32 microAptiv core -> PIC32 family -> PIC32MZ Graphics sub-family -> integrated Graphics Controller + DDR2 DRAM controller. These MCUs replace multi-chip MPU-plus-DRAM-plus-controller solutions by collapsing graphics, memory control, and deterministic real-time control into one die. Key features include the on-chip integrated Graphics Controller with up to 128MB externally addressable DDR2 DRAM (32MB on-chip option available in this family), an integrated Graphics Processing Unit (GPU) with hardware-accelerated alpha blending, gradients, and image rendering, plus a comprehensive peripheral set including USB 2.0 high-speed OTG, two CAN 2.0b ports, 10/100 Ethernet MAC, HS USB, multiple SPI/I2C/UART interfaces, and a 12-bit ADC. The device supports parallel TFT/pixel interfaces for direct display drive. A 32KB instruction cache and 32KB data cache hide DDR2 latency while the microAptiv core handles DSP-style arithmetic. Typical applications include industrial human-machine interfaces (HMIs), point-of-sale (POS) terminals, medical patient monitors, automotive infotainment, smart home control panels, and any embedded GUI requiring high-resolution color graphics, multi-touch responsiveness, and real-time control loops. The integrated DDR2 controller eliminates an external memory bridge; the integrated graphics engine eliminates an external LCD controller chip, reducing BOM cost and PCB area. When designing with this MCU, pay close attention to DDR2 PCB routing (matched-impedance, length-matched byte lanes, proper VREF and VTT termination), supply decoupling near the integrated LDO regulator pins, and pin-mux configuration through PPS (Peripheral Pin Select). The -V temperature grade supports industrial and outdoor installations. For software, MPLAB Harmony v3 provides the Graphics Composer library and 2D driver layer that exercises the integrated controller directly. This page synthesizes distributor pricing, drop-in alternatives, and PCB design notes not found in the manufacturer datasheet alone.

USD $8.95 在庫あり

PIC32MZ2064DAK176T-I/2J

PIC32MZ2064DAK176T-I/2J - 200MHz 32-bit MCU 2MB Flash | Microchip

The Microchip Technology PIC32MZ2064DAK176T-I/2J is a high-performance 32-bit microcontroller from the PIC32MZ Graphics (DA) family, based on the MIPS32 microAptiv core and packaged in a 176-pin LQFP (20x20 mm). The device runs at 200 MHz and integrates 2 MB of Flash and 640 KB of SRAM, making it suitable for graphics-rich embedded designs that demand MPU-class performance with MCU-class simplicity. A 32-bit microcontroller (MCU) is a programmable processor that integrates CPU, memory, and peripherals on a single silicon die. Within the broader hierarchy, this device sits as MCU -> 32-bit MCU -> MIPS-based MCU -> PIC32MZ family -> Power Management IC family tree -> semiconductor. The DA sub-family specifically adds an integrated Graphics Controller, Graphics Processor, and a DDR2 DRAM controller that can address up to 128 MB of external DDR2 memory, removing the need for an external memory controller in GUI applications. Key features of the PIC32MZ2064DAK176T-I/2J include 200 MHz core speed with 1.56 DMIPS/MHz, 2 MB Flash, 640 KB SRAM, DDR2 DRAM interface supporting 32 MB or 128 MB externally addressable memory, an integrated 2D Graphics Controller and Graphics Processor for hardware-accelerated rendering, and a full set of connectivity peripherals including USB, Ethernet, CAN, SPI, I2C and UART. The 176-pin LQFP package exposes 51 general-purpose I/O lines and multiple analog/digital peripherals such as ADC, comparators, and timers. From an architecture perspective, the PIC32MZ DA family combines a high-speed MIPS32 microAptiv core with tightly coupled SRAM, dedicated DMA channels, and an L1 cache subsystem. The integrated DDR2 controller and graphics pipeline reduce external component count, while the 200 MHz operation with hardware multiply/divide and DSP extensions accelerates image manipulation and HMI rendering in real time. Typical applications include industrial HMI panels, automotive instrument clusters, point-of-sale terminals, medical user interfaces, smart-home control panels, and any embedded GUI requiring smooth graphics on a single chip. The wide peripheral set also makes it a strong choice for connected industrial gateways. When designing with this device, ensure proper DDR2 PCB layout (length-matched traces, controlled impedance) and adequate decoupling near the 176 LQFP power pins. Use the MPLAB Harmony framework and the PIC32MZ DA BSP for DMA, DDR2 and graphics driver initialization.

USD $10.20 在庫あり

PIC32MZ2064DAK176T-V/2J

PIC32MZ2064DAK176T-V/2J - 200MHz Graphics MCU 2MB Flash | Microchip

The Microchip Technology PIC32MZ2064DAK176T-V/2J is a 32-bit MIPS32 microAptiv-based PIC32MZ DAK family microcontroller running at 200 MHz, integrating 2 MB Flash and 640 KB SRAM with a dedicated Graphics Controller, on-chip 32 MB (DAK variant) externally addressable DDR2 DRAM, and a 176-pin HLFQFP (20x20 mm) LQFP package. The part suffix T indicates tape-and-reel packaging and V/2J denotes the -40C to +105C automotive/V-grade temperature range. The integrated graphics pipeline enables HMI/GUI designs on a chip without external GPU silicon. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory, and programmable peripherals; the PIC32MZ DAK series occupies the high-performance graphics tier of this category (MCU -> 32-bit MCU -> graphics-enabled MCU -> HMI controller -> embedded system SoC). Compared to a general-purpose MCU, the PIC32MZ DAK family adds a hardware graphics controller and DDR2 DRAM interface, simplifying parallel-display designs. Key features include the 32-bit MIPS32 microAptiv core with I/D-cache, MIPS DSP ASE extensions, 2 MB Flash with ECC, 640 KB SRAM, hardware graphics processor with TFT/LCD controller, six 4-wire SPI modules (up to 50 MHz), SQI configurable as additional SPI (up to 80 MHz), six UART modules (25 Mbps with LIN 2.1 and IrDA support), two CAN 2.0B modules with DeviceNet addressing, five I2C modules (up to 1 Mbaud) with SMBus support, a Parallel Host Port (PMP), and Peripheral Pin Select (PPS) for flexible pin function remapping. Two CAN modules each have a dedicated DMA channel for low-overhead bus traffic. The device targets advanced HMI/GUI applications - industrial touch panels, automotive dashboards, medical patient monitors, home-automation control screens, and point-of-sale terminals - where parallel or parallel connections, the integrated TFT controller and DDR2 framebuffer remove the need for an external GPU and reduce BOM cost. The 200 MHz core plus 2 MB video hardware targets the right performance bracket for WVGA-class displays. When designing with this part, plan PCB layout for DDR2 signals first - controlled impedance, matched lengths, and proper decoupling dominate signal integrity. Use MPLAB Harmony 3 to configure the graphics middleware (GFX) and the DDR2 DRAM controller for your panel. For cost-down swaps within the same family, refer to the PIC32MZ2064DAH176 (DAG/DAB/DAA are BGA variants) and PIC32MZ2064DAS176 (DAS = on-chip 128 MB DRAM, the larger-DRAM cousin). This page synthesizes distributor pricing, drop-in alternatives within the same VQFPH-FP-176 package, MPLAB Harmony configuration notes, and automotive-grade selection guidance not found in the manufacturer datasheet alone.

USD $12.50 在庫あり

PIC32MZ2064DAL169-I/HF

PIC32MZ2064DAL169-I/HF - 200MHz 32-bit MCU 2MB Flash LFBGA-169 | Microchip

The Microchip PIC32MZ2064DAL169-I/HF is a high-integration 32-bit MIPS microAptiv PIC microcontroller in the family MAC's PIC32MZ Graphics (DAK/DAL/DAR/DAS) line, offering up to 200 MHz core speed, 2 MB of Flash, and 640 KB of SRAM in a 169-pin LFBGA (11x11 mm) package. The device integrates an on-chip Graphics Controller and Graphics Processor, an external DDR2 DRAM interface (up to 32 MB or 128 MB addressable), a 12-bit 18 MSPS ADC with up to 45 analog inputs, USB 2.0 High-Speed, CAN, and 120 digital I/O lines. A microcontroller (MCU) is a single-chip computer that integrates a processor core, program memory (Flash), data memory (SRAM), and a wide range of peripherals such as ADC, timers, communication controllers, and GPIOs. PIC32MZ DAL devices sit at the high end of Microchip's PIC32 line, with 32-bit MIPS cores and peripherals aimed at GUI designs, industrial HMI, and audio/video processing. Within the broader taxonomy they are members of the embedded microcontroller family -> 32-bit microcontroller -> graphics-enabled MCU -> semiconductor. Key features of the PIC32MZ2064DAL169-I/HF include 2 MB Flash for code and graphics assets, 640 KB SRAM for frame buffers, a 12-bit 18 MSPS ADC supporting up to 45 analog channels, an integrated Graphics Processing Unit (GPU) with dedicated DDR2 controller, and a peripheral set that includes High-Speed USB 2.0, two CAN modules, multiple SPI/I2C/UART channels, and up to 9 PWM outputs. The card runs at up to 200 MHz with MIPS32 microAptiv instructions, delivering MPU-class performance while remaining programmable as a single-chip MCU. In terms of architecture, the device couples a single-core MIPS32 microAptiv with a parallel GPU/display pipeline. The integrated DDR2 controller supports up to 32 MB on-chip or 128 MB externally addressable memory, freeing the main bus for CPU-bound tasks. The 12-bit 18 MSPS ADC is suitable for general analog sensing, while the graphics block accelerates JPEG decoding, alpha blending, and LCD/3D rendering without burdening the CPU. Key applications include industrial control HMI panels, medical patient monitors, automotive infotainment clusters, point-of-sale terminals, and graphics-rich embedded products. The wide peripheral mix and DDR2 memory support make it ideal for systems with TFT LCDs needing fast image processing. Design tip - the LFBGA-169 package requires careful PCB design with matched-impedance routing and proper DDR2 trace length matching for reliable high-speed operation. This page synthesizes distributor stock and pricing, drop-in alternative MCUs from the PIC32MZ family, and practical design notes not found in the manufacturer datasheet alone.

USD $10.45 在庫あり

PIC32MZ2064DAL176-I/2J

PIC32MZ2064DAL176-I/2J - 200MHz 32-bit MCU 2MB Flash | Microchip

The Microchip Technology PIC32MZ2064DAL176-I/2J is a high-performance 32-bit microcontroller from the PIC32MZ Graphics (DA) family, featuring a MIPS32 microAptiv core running at 200 MHz, 2 MB of internal Flash and 640 KB of SRAM in a 176-pin LQFP (20x20 mm) package. According to DigiKey listing data, the part integrates 2 MB of program memory, 640 KB of data RAM, and a 32-bit single-core microAptiv processor targeted at GUI and graphics-rich embedded applications. The DAL176 device supports an operating voltage range of 1.7V to 1.9V (1.8V typical) and provides up to 120 general-purpose I/O pins for peripheral expansion. A 32-bit microcontroller (MCU) is a microprocessor integrated with Flash memory, RAM, peripherals, and I/O on a single die. MCUs form the lowest tier in the embedded computing hierarchy: microcontroller -> embedded processor -> SoC -> computing platform. The PIC32MZ DA family specifically bridges the gap between traditional microcontrollers and application processors by integrating a graphics controller, graphics processor, and DDR2 DRAM controller on-chip, delivering MPU-like performance with the ease-of-design of an MCU. This integration reduces BOM cost and PCB area for HMI designs versus discrete CPU + external controller solutions. Key features of the PIC32MZ2064DAL176-I/2J include a 200 MHz core clock, hardware FPU for single/double-precision math, 32 KB I-cache and 32 KB D-cache, integrated 2D graphics processing unit (GPU) and graphics LCD controller supporting resolutions up to WXGA, and on-chip DDR2 DRAM controller for up to 128 MB external addressable memory. Peripherals include USB 2.0 High-Speed OTG, CAN 2.0B, Ethernet MAC, HS PMP/PSP, multiple I2C/SPI/UART, and a 12-bit ADC at 500 ksps. The 176-LQFP package exposes all peripherals across 120 I/O pins with ample signal integrity margin for high-speed interfaces. Architecturally, the device uses a 5-stage pipeline microAptiv core with branch prediction, MMU, and DSP extensions, enabling real-time signal processing alongside control tasks. The DDR2 interface allows frame buffers and large graphical assets to be stored in low-cost external DRAM, while deterministic Flash execution and tightly-coupled RAM support latency-critical ISR code paths required by industrial HMI and automotive cluster designs. Typical applications span industrial HMI panels, home appliance GUIs, automotive instrument clusters, medical patient monitors, point-of-sale terminals, and aviation cockpit displays. The integrated graphics pipeline eliminates the need for external GPU silicon in mid-resolution TFT panels up to 7-10 inches. When designing with this device, allocate a 4-layer PCB with dedicated ground planes for the DDR2 interface to maintain signal integrity above 200 MHz. Use Microchip's MPLAB Harmony configurator and the PIC32MZ DA Starter Kit reference designs to accelerate firmware bring-up. Ensure the 1.8V core rail is sequenced before the DDR2 supply to prevent bus contention. This page synthesizes distributor stock levels, drop-in same-package variants from the PIC32MZ DA family, and practical hardware design notes not consolidated on the manufacturer product page.

USD $17.95 在庫あり

製品 (18688)