AD621BNZ vs AD621AR 比較
詳細な並列比較: AD621BNZ メーカー: Analog Devices および AD621AR メーカー: Analog Devices。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
仕様比較
| パラメータ | AD621BNZ | AD621AR |
|---|---|---|
| ブランド | Analog Devices | Analog Devices |
| カテゴリ | Amplifier ICs | Amplifier ICs |
| ライフサイクル状態 | 有効 | 有効 |
| Product Type | Instrumentation amplifier | Single-channel instrumentation amplifier |
| Number of Amplifiers | 1 circuit | — |
| Supply Voltage Range | ±2.3 V to ±18 V | — |
| パッケージ | 8-pin PDIP | 8-SOIC |
| Input Offset Voltage | 125 µV typical | [DATA_NEEDED: input offset voltage] |
| Bandwidth | 800 kHz typical | — |
| Slew Rate | 1.2 V/µs typical | [DATA_NEEDED: slew rate] |
| Common-Mode Rejection Ratio | 120 dB to 130 dB, condition dependent | [DATA_NEEDED: minimum common-mode rejection ratio] |
| Gain | 10 or 100, pin-strappable | — |
| 出力タイプ | Single-ended | — |
| Input Bias Current | 1 nA listed for AD621BNZ comparison | [DATA_NEEDED: input bias current] |
| Operating Voltage | ±2.3 V to ±18 V | — |
| Internal Gain Setting | Internal resistor gain | — |
| ESD Protection | Yes | — |
| 実装タイプ | Through-hole | — |
| RoHS ステータス | unknown | [DATA_NEEDED: RoHS status] |
| REACH Status | unknown | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | not_applicable | — |
| 動作温度範囲 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| 電源電流 | [DATA_NEEDED: supply current] | [DATA_NEEDED: typical and maximum supply current] |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode range] | — |
| 出力電圧範囲 | [DATA_NEEDED: output voltage range] | — |
| Reference Input Range | [DATA_NEEDED: reference input range] | — |
| Manufacturer | — | Analog Devices |
| Number of Circuits | — | 1 circuit |
| Architecture | — | Integrated three-op-amp instrumentation-amplifier architecture |
| Power Class | — | Low power |
| Drift Class | — | Low drift |
| Accuracy Class | — | High accuracy |
| 電源電圧 | — | ±18 V maximum |
| Gain Range | — | 10 to 10,000 |
| Gain Error | — | [DATA_NEEDED: maximum gain error] |
| Gain Drift | — | [DATA_NEEDED: maximum gain drift] |
| Small-Signal Bandwidth | — | [DATA_NEEDED: gain-dependent bandwidth] |